FREE SHIPPING ON ORDERS OVER $100.0 Dollars!

  • Navpod GP2500-34 SystemPod for Raymarine AXIOM 7

    Navpod Navpod GP2500-34 SystemPod for Raymarine AXIOM 7

    NAVGP250034 SystemPodModel: GP2500-34SystemPod Pre-Cut for Raymarine AXIOM 7 and space for 12? wide guard(Requires Raymarine Part# A80498 Front Mount Kit for AXIOM 7 & Right Angled with NMEA 2000 Connector)(Pre-Cut is for Front Mount)SystemPods are for mounting a Radar or Chartplotter and Instruments together at the helm. Navigation at your finger tips. "Where you need it?when you need it". SystemPods are the smart solution for mounting your Radar or Chartplotter and Instruments together at the helm where you can easily operate and clearly see the fine details of the screen.A SystemPod is best mounted on a Single Bend AngleGuard.Structural Rigidity — The Gen3 enhancements now include a thicker gauge acrylic capped ABS material that improves strength and provides better structural rigidity. This thicker material allows for a larger waterproof seal. The better the structural rigidity, the less flexing when tightening and more uniform pressure on the seal. The excellent UV stability of the acrylic is combined with the durability of the ABS. The acrylic cap protects the ABS from UV and its potentially damaging effects on plastic.Waterproof Seal — All SystemPods are manufactured with a double gasket system providing an excellent watertight seal. This seal provides the best protection of your Marine Electronics. SystemPods are made to withstand the harshest wet offshore boating conditions. Gen3 enhancements include a thicker external silicone gasket with improved flush fit. The internal Poran Microcell Polyurathane gasket is now 50% thicker and is not subject to "compression set" like many rubber compounds. This is important when you need to open the SystemPod in the future in order to service your electronics. The gasket will continue to do its job.Nickel Chrome Plated Stainless Steel — We use all 316 stainless steel hardware that is supplied with each NavPod. Large round head tamperproof screws have deeper sockets for the NavPod wrench for better holding ability when tightening than screws used on our Traditional Series NavPod. For Gen3 NavPods we provide nickel chrome-plated stainless steel tamperproof screws for security combined with a little style!Commitment to quality We stand behind our commitment by offering a 10-year warranty on all new Gen3 NavPods.Specifications Overall Height 7.75 Width 16.75 Depth 4.375 Usable Face Height 6 Width 15 Depth 3.125 Max Cutout Height 5.5 Width 14.25

    $332.88

  • Navpod GP2500-33 SystemPod for Raymarine AXIOM 7

    Navpod Navpod GP2500-33 SystemPod for Raymarine AXIOM 7

    NAVGP250033 SystemPodModel: GP2500-33SystemPod Pre-Cut for Raymarine AXIOM 7 and 1 inst. for 12? wide guard (Requires Raymarine Part# A80498 Front Mount Kit for AXIOM 7 & Right Angled with NMEA 2000 Connector)(Pre-Cut is for Front Mount)SystemPods are for mounting a Radar or Chartplotter and Instruments together at the helm. Navigation at your finger tips. "Where you need it?when you need it". SystemPods are the smart solution for mounting your Radar or Chartplotter and Instruments together at the helm where you can easily operate and clearly see the fine details of the screen.A SystemPod is best mounted on a Single Bend AngleGuard.Structural Rigidity — The Gen3 enhancements now include a thicker gauge acrylic capped ABS material that improves strength and provides better structural rigidity. This thicker material allows for a larger waterproof seal. The better the structural rigidity, the less flexing when tightening and more uniform pressure on the seal. The excellent UV stability of the acrylic is combined with the durability of the ABS. The acrylic cap protects the ABS from UV and its potentially damaging effects on plastic.Waterproof Seal — All SystemPods are manufactured with a double gasket system providing an excellent watertight seal. This seal provides the best protection of your Marine Electronics. SystemPods are made to withstand the harshest wet offshore boating conditions. Gen3 enhancements include a thicker external silicone gasket with improved flush fit. The internal Poran Microcell Polyurathane gasket is now 50% thicker and is not subject to "compression set" like many rubber compounds. This is important when you need to open the SystemPod in the future in order to service your electronics. The gasket will continue to do its job.Nickel Chrome Plated Stainless Steel — We use all 316 stainless steel hardware that is supplied with each NavPod. Large round head tamperproof screws have deeper sockets for the NavPod wrench for better holding ability when tightening than screws used on our Traditional Series NavPod. For Gen3 NavPods we provide nickel chrome-plated stainless steel tamperproof screws for security combined with a little style!Commitment to quality We stand behind our commitment by offering a 10-year warranty on all new Gen3 NavPods.Specifications Overall Height 7.75 Width 16.75 Depth 4.375 Usable Face Height 6 Width 15 Depth 3.125 Max Cutout Height 5.5 Width 14.25

    $332.88

  • Navpod GP2500-32 SystemPod for Simrad NSS7 evo3

    Navpod Navpod GP2500-32 SystemPod for Simrad NSS7 evo3

    NAVGP250032 SystemPodModel: GP2500-32SystemPod Pre-Cut for Simrad NSS7 evo3 / B&G Zeus3 7 and space for 12? wide guardSystemPods are for mounting a Radar or Chartplotter and Instruments together at the helm. Navigation at your finger tips. "Where you need it?when you need it". SystemPods are the smart solution for mounting your Radar or Chartplotter and Instruments together at the helm where you can easily operate and clearly see the fine details of the screen.A SystemPod is best mounted on a Single Bend AngleGuard.Structural Rigidity — The Gen3 enhancements now include a thicker gauge acrylic capped ABS material that improves strength and provides better structural rigidity. This thicker material allows for a larger waterproof seal. The better the structural rigidity, the less flexing when tightening and more uniform pressure on the seal. The excellent UV stability of the acrylic is combined with the durability of the ABS. The acrylic cap protects the ABS from UV and its potentially damaging effects on plastic.Waterproof Seal — All SystemPods are manufactured with a double gasket system providing an excellent watertight seal. This seal provides the best protection of your Marine Electronics. SystemPods are made to withstand the harshest wet offshore boating conditions. Gen3 enhancements include a thicker external silicone gasket with improved flush fit. The internal Poran Microcell Polyurathane gasket is now 50% thicker and is not subject to "compression set" like many rubber compounds. This is important when you need to open the SystemPod in the future in order to service your electronics. The gasket will continue to do its job.Nickel Chrome Plated Stainless Steel — We use all 316 stainless steel hardware that is supplied with each NavPod. Large round head tamperproof screws have deeper sockets for the NavPod wrench for better holding ability when tightening than screws used on our Traditional Series NavPod. For Gen3 NavPods we provide nickel chrome-plated stainless steel tamperproof screws for security combined with a little style!Commitment to quality We stand behind our commitment by offering a 10-year warranty on all new Gen3 NavPods.Specifications Overall Height 7.75 Width 16.75 Depth 4.375 Usable Face Height 6 Width 15 Depth 3.125 Max Cutout Height 5.5 Width 14.25

    $332.88

  • Navpod GP2500-31 SystemPod for Simrad NSS7 evo3

    Navpod Navpod GP2500-31 SystemPod for Simrad NSS7 evo3

    NAVGP250031 SystemPodModel: GP2500-31SystemPod Pre-Cut for Simrad NSS7 evo3 / B&G Zeus3 7 and 1 inst. (Simrad IS42 / B&G Triton /AP44 square hole) for 12? wide guardSystemPods are for mounting a Radar or Chartplotter and Instruments together at the helm. Navigation at your finger tips. "Where you need it?when you need it". SystemPods are the smart solution for mounting your Radar or Chartplotter and Instruments together at the helm where you can easily operate and clearly see the fine details of the screen.A SystemPod is best mounted on a Single Bend AngleGuard.Structural Rigidity — The Gen3 enhancements now include a thicker gauge acrylic capped ABS material that improves strength and provides better structural rigidity. This thicker material allows for a larger waterproof seal. The better the structural rigidity, the less flexing when tightening and more uniform pressure on the seal. The excellent UV stability of the acrylic is combined with the durability of the ABS. The acrylic cap protects the ABS from UV and its potentially damaging effects on plastic.Waterproof Seal — All SystemPods are manufactured with a double gasket system providing an excellent watertight seal. This seal provides the best protection of your Marine Electronics. SystemPods are made to withstand the harshest wet offshore boating conditions. Gen3 enhancements include a thicker external silicone gasket with improved flush fit. The internal Poran Microcell Polyurathane gasket is now 50% thicker and is not subject to "compression set" like many rubber compounds. This is important when you need to open the SystemPod in the future in order to service your electronics. The gasket will continue to do its job.Nickel Chrome Plated Stainless Steel — We use all 316 stainless steel hardware that is supplied with each NavPod. Large round head tamperproof screws have deeper sockets for the NavPod wrench for better holding ability when tightening than screws used on our Traditional Series NavPod. For Gen3 NavPods we provide nickel chrome-plated stainless steel tamperproof screws for security combined with a little style!Commitment to quality We stand behind our commitment by offering a 10-year warranty on all new Gen3 NavPods.Specifications Overall Height 7.75 Width 16.75 Depth 4.375 Usable Face Height 6 Width 15 Depth 3.125 Max Cutout Height 5.5 Width 14.25

    $332.88

  • Navpod GP2500-30 SystemPod for Simrad NSS7 evo3

    Navpod Navpod GP2500-30 SystemPod for Simrad NSS7 evo3

    NAVGP250030 SystemPodModel: GP2500-30SystemPod Pre-Cut for Simrad NSS7 evo3 / B&G Zeus3 7 and 1 inst. (3.6? hole) for 12? wide guardSystemPods are for mounting a Radar or Chartplotter and Instruments together at the helm. Navigation at your finger tips. "Where you need it?when you need it". SystemPods are the smart solution for mounting your Radar or Chartplotter and Instruments together at the helm where you can easily operate and clearly see the fine details of the screen.A SystemPod is best mounted on a Single Bend AngleGuard.Structural Rigidity — The Gen3 enhancements now include a thicker gauge acrylic capped ABS material that improves strength and provides better structural rigidity. This thicker material allows for a larger waterproof seal. The better the structural rigidity, the less flexing when tightening and more uniform pressure on the seal. The excellent UV stability of the acrylic is combined with the durability of the ABS. The acrylic cap protects the ABS from UV and its potentially damaging effects on plastic.Waterproof Seal — All SystemPods are manufactured with a double gasket system providing an excellent watertight seal. This seal provides the best protection of your Marine Electronics. SystemPods are made to withstand the harshest wet offshore boating conditions. Gen3 enhancements include a thicker external silicone gasket with improved flush fit. The internal Poran Microcell Polyurathane gasket is now 50% thicker and is not subject to "compression set" like many rubber compounds. This is important when you need to open the SystemPod in the future in order to service your electronics. The gasket will continue to do its job.Nickel Chrome Plated Stainless Steel — We use all 316 stainless steel hardware that is supplied with each NavPod. Large round head tamperproof screws have deeper sockets for the NavPod wrench for better holding ability when tightening than screws used on our Traditional Series NavPod. For Gen3 NavPods we provide nickel chrome-plated stainless steel tamperproof screws for security combined with a little style!Commitment to quality We stand behind our commitment by offering a 10-year warranty on all new Gen3 NavPods.Specifications Overall Height 7.75 Width 16.75 Depth 4.375 Usable Face Height 6 Width 15 Depth 3.125 Max Cutout Height 5.5 Width 14.25

    $332.88

  • Navpod GP2500-29 SystemPod for Garmin GPSMAP 742/722

    Navpod Navpod GP2500-29 SystemPod for Garmin GPSMAP 742/722

    NAVGP250029 SystemPodModel: GP2500-29SystemPod Pre-Cut for Garmin GPSMAP 742xs/742/722xs/722 and 1 inst. (3.6? hole) for 12 wide guardSystemPods are for mounting a Radar or Chartplotter and Instruments together at the helm. Navigation at your finger tips. "Where you need it?when you need it". SystemPods are the smart solution for mounting your Radar or Chartplotter and Instruments together at the helm where you can easily operate and clearly see the fine details of the screen.A SystemPod is best mounted on a Single Bend AngleGuard.Structural Rigidity — The Gen3 enhancements now include a thicker gauge acrylic capped ABS material that improves strength and provides better structural rigidity. This thicker material allows for a larger waterproof seal. The better the structural rigidity, the less flexing when tightening and more uniform pressure on the seal. The excellent UV stability of the acrylic is combined with the durability of the ABS. The acrylic cap protects the ABS from UV and its potentially damaging effects on plastic.Waterproof Seal — All SystemPods are manufactured with a double gasket system providing an excellent watertight seal. This seal provides the best protection of your Marine Electronics. SystemPods are made to withstand the harshest wet offshore boating conditions. Gen3 enhancements include a thicker external silicone gasket with improved flush fit. The internal Poran Microcell Polyurathane gasket is now 50% thicker and is not subject to "compression set" like many rubber compounds. This is important when you need to open the SystemPod in the future in order to service your electronics. The gasket will continue to do its job.Nickel Chrome Plated Stainless Steel — We use all 316 stainless steel hardware that is supplied with each NavPod. Large round head tamperproof screws have deeper sockets for the NavPod wrench for better holding ability when tightening than screws used on our Traditional Series NavPod. For Gen3 NavPods we provide nickel chrome-plated stainless steel tamperproof screws for security combined with a little style!Commitment to quality We stand behind our commitment by offering a 10-year warranty on all new Gen3 NavPods.Specifications Overall Height 7.75 Width 16.75 Depth 4.375 Usable Face Height 6 Width 15 Depth 3.125 Max Cutout Height 5.5 Width 3.125

    $332.88

  • Navpod GP2500-17 SystemPod for Simrad GO7

    Navpod Navpod GP2500-17 SystemPod for Simrad GO7

    NAVGP250017 SystemPodModel: GP2500-17SystemPod Pre-Cut for Simrad GO7/B&G Vulcan 7 (Pre Nov. 2017) and 1 inst. (Simrad IS42 / B&G Triton /AP44 square hole) for 12? wide guardSystemPods are for mounting a Radar or Chartplotter and Instruments together at the helm. Navigation at your finger tips. "Where you need it?when you need it". SystemPods are the smart solution for mounting your Radar or Chartplotter and Instruments together at the helm where you can easily operate and clearly see the fine details of the screen.A SystemPod is best mounted on a Single Bend AngleGuard.Structural Rigidity — The Gen3 enhancements now include a thicker gauge acrylic capped ABS material that improves strength and provides better structural rigidity. This thicker material allows for a larger waterproof seal. The better the structural rigidity, the less flexing when tightening and more uniform pressure on the seal. The excellent UV stability of the acrylic is combined with the durability of the ABS. The acrylic cap protects the ABS from UV and its potentially damaging effects on plastic.Waterproof Seal — All SystemPods are manufactured with a double gasket system providing an excellent watertight seal. This seal provides the best protection of your Marine Electronics. SystemPods are made to withstand the harshest wet offshore boating conditions. Gen3 enhancements include a thicker external silicone gasket with improved flush fit. The internal Poran Microcell Polyurathane gasket is now 50% thicker and is not subject to "compression set" like many rubber compounds. This is important when you need to open the SystemPod in the future in order to service your electronics. The gasket will continue to do its job.Nickel Chrome Plated Stainless Steel — We use all 316 stainless steel hardware that is supplied with each NavPod. Large round head tamperproof screws have deeper sockets for the NavPod wrench for better holding ability when tightening than screws used on our Traditional Series NavPod. For Gen3 NavPods we provide nickel chrome-plated stainless steel tamperproof screws for security combined with a little style!Commitment to quality We stand behind our commitment by offering a 10-year warranty on all new Gen3 NavPods.Specifications Overall Height 7.75 Width 16.75 Depth 4.375 Usable Face Height 6 Width 15 Depth 3.125 Max Cutout Height 5.5 Width 14.25

    $332.88

  • Navpod GP2500-16 SystemPod for Simrad NSS7 evo3

    Navpod Navpod GP2500-16 SystemPod for Simrad NSS7 evo3

    NAVGP250016 SystemPodModel: GP2500-16SystemPod Pre-Cut for Simrad NSS7 evo /B&G Zeus 7 and 1 inst. (Simrad IS42 / B&G Triton /AP44 square hole) for 12? wide guardSystemPods are for mounting a Radar or Chartplotter and Instruments together at the helm. Navigation at your finger tips. "Where you need it?when you need it". SystemPods are the smart solution for mounting your Radar or Chartplotter and Instruments together at the helm where you can easily operate and clearly see the fine details of the screen.A SystemPod is best mounted on a Single Bend AngleGuard.Structural Rigidity — The Gen3 enhancements now include a thicker gauge acrylic capped ABS material that improves strength and provides better structural rigidity. This thicker material allows for a larger waterproof seal. The better the structural rigidity, the less flexing when tightening and more uniform pressure on the seal. The excellent UV stability of the acrylic is combined with the durability of the ABS. The acrylic cap protects the ABS from UV and its potentially damaging effects on plastic.Waterproof Seal — All SystemPods are manufactured with a double gasket system providing an excellent watertight seal. This seal provides the best protection of your Marine Electronics. SystemPods are made to withstand the harshest wet offshore boating conditions. Gen3 enhancements include a thicker external silicone gasket with improved flush fit. The internal Poran Microcell Polyurathane gasket is now 50% thicker and is not subject to "compression set" like many rubber compounds. This is important when you need to open the SystemPod in the future in order to service your electronics. The gasket will continue to do its job.Nickel Chrome Plated Stainless Steel — We use all 316 stainless steel hardware that is supplied with each NavPod. Large round head tamperproof screws have deeper sockets for the NavPod wrench for better holding ability when tightening than screws used on our Traditional Series NavPod. For Gen3 NavPods we provide nickel chrome-plated stainless steel tamperproof screws for security combined with a little style!Commitment to quality We stand behind our commitment by offering a 10-year warranty on all new Gen3 NavPods.Specifications Overall Height 7.75 Width 16.75 Depth 4.375 Usable Face Height 6 Width 15 Depth 3.125 Max Cutout Height 5.5 Width 14.25

    $332.88

  • Navpod GP2500-14 SystemPod for 12" wide guard

    Navpod Navpod GP2500-14 SystemPod for 12" wide guard

    NAVGP250014 SystemPodModel: GP2500-14SystemPod Pre-Cut for Humminbird HELIX 7 Series 7 and 1 inst. (3.6? hole) for 12? wide guardSystemPods are for mounting a Radar or Chartplotter and Instruments together at the helm. Navigation at your finger tips. "Where you need it?when you need it". SystemPods are the smart solution for mounting your Radar or Chartplotter and Instruments together at the helm where you can easily operate and clearly see the fine details of the screen.A SystemPod is best mounted on a Single Bend AngleGuard.Structural Rigidity — The Gen3 enhancements now include a thicker gauge acrylic capped ABS material that improves strength and provides better structural rigidity. This thicker material allows for a larger waterproof seal. The better the structural rigidity, the less flexing when tightening and more uniform pressure on the seal. The excellent UV stability of the acrylic is combined with the durability of the ABS. The acrylic cap protects the ABS from UV and its potentially damaging effects on plastic.Waterproof Seal — All SystemPods are manufactured with a double gasket system providing an excellent watertight seal. This seal provides the best protection of your Marine Electronics. SystemPods are made to withstand the harshest wet offshore boating conditions. Gen3 enhancements include a thicker external silicone gasket with improved flush fit. The internal Poran Microcell Polyurathane gasket is now 50% thicker and is not subject to "compression set" like many rubber compounds. This is important when you need to open the SystemPod in the future in order to service your electronics. The gasket will continue to do its job.Nickel Chrome Plated Stainless Steel — We use all 316 stainless steel hardware that is supplied with each NavPod. Large round head tamperproof screws have deeper sockets for the NavPod wrench for better holding ability when tightening than screws used on our Traditional Series NavPod. For Gen3 NavPods we provide nickel chrome-plated stainless steel tamperproof screws for security combined with a little style!Commitment to quality We stand behind our commitment by offering a 10-year warranty on all new Gen3 NavPods.Specifications Overall Height 7.75 Width 16.75 Depth 4.375 Usable Face Height 6 Width 15 Depth 3.125 Max Cutout Height 5.5 Width 14.25

    $332.88

  • Navpod GP2500-09 SystemPod for 12" wide guard

    Navpod Navpod GP2500-09 SystemPod for 12" wide guard

    NAVGP250009 SystemPodModel: GP2500-09SystemPod Pre-Cut for Garmin GPSMAP 742xs/742/722xs/722 and space for 12? wide guardSystemPods are for mounting a Radar or Chartplotter and Instruments together at the helm. Navigation at your finger tips. "Where you need it?when you need it". SystemPods are the smart solution for mounting your Radar or Chartplotter and Instruments together at the helm where you can easily operate and clearly see the fine details of the screen.A SystemPod is best mounted on a Single Bend AngleGuard.Structural Rigidity — The Gen3 enhancements now include a thicker gauge acrylic capped ABS material that improves strength and provides better structural rigidity. This thicker material allows for a larger waterproof seal. The better the structural rigidity, the less flexing when tightening and more uniform pressure on the seal. The excellent UV stability of the acrylic is combined with the durability of the ABS. The acrylic cap protects the ABS from UV and its potentially damaging effects on plastic.Waterproof Seal — All SystemPods are manufactured with a double gasket system providing an excellent watertight seal. This seal provides the best protection of your Marine Electronics. SystemPods are made to withstand the harshest wet offshore boating conditions. Gen3 enhancements include a thicker external silicone gasket with improved flush fit. The internal Poran Microcell Polyurathane gasket is now 50% thicker and is not subject to "compression set" like many rubber compounds. This is important when you need to open the SystemPod in the future in order to service your electronics. The gasket will continue to do its job.Nickel Chrome Plated Stainless Steel — We use all 316 stainless steel hardware that is supplied with each NavPod. Large round head tamperproof screws have deeper sockets for the NavPod wrench for better holding ability when tightening than screws used on our Traditional Series NavPod. For Gen3 NavPods we provide nickel chrome-plated stainless steel tamperproof screws for security combined with a little style!Commitment to quality We stand behind our commitment by offering a 10-year warranty on all new Gen3 NavPods.Specifications Overall Height 7.75 Width 16.75 Depth 4.375 Usable Face Height 6 Width 15 Depth 3.125 Max Cutout Height 5.5 Width 14.25

    $332.88

  • Navpod GP2500-04 SystemPod for 12" wide guard

    Navpod Navpod GP2500-04 SystemPod for 12" wide guard

    NAVGP250004 SystemPodModel: GP2500-04SystemPod Pre-Cut for Humminbird HELIX 7 Series 7 and space/for 12? wide guardSystemPods are for mounting a Radar or Chartplotter and Instruments together at the helm. Navigation at your finger tips. "Where you need it?when you need it". SystemPods are the smart solution for mounting your Radar or Chartplotter and Instruments together at the helm where you can easily operate and clearly see the fine details of the screen.A SystemPod is best mounted on a Single Bend AngleGuard.Structural Rigidity — The Gen3 enhancements now include a thicker gauge acrylic capped ABS material that improves strength and provides better structural rigidity. This thicker material allows for a larger waterproof seal. The better the structural rigidity, the less flexing when tightening and more uniform pressure on the seal. The excellent UV stability of the acrylic is combined with the durability of the ABS. The acrylic cap protects the ABS from UV and its potentially damaging effects on plastic.Waterproof Seal — All SystemPods are manufactured with a double gasket system providing an excellent watertight seal. This seal provides the best protection of your Marine Electronics. SystemPods are made to withstand the harshest wet offshore boating conditions. Gen3 enhancements include a thicker external silicone gasket with improved flush fit. The internal Poran Microcell Polyurathane gasket is now 50% thicker and is not subject to "compression set" like many rubber compounds. This is important when you need to open the SystemPod in the future in order to service your electronics. The gasket will continue to do its job.Nickel Chrome Plated Stainless Steel — We use all 316 stainless steel hardware that is supplied with each NavPod. Large round head tamperproof screws have deeper sockets for the NavPod wrench for better holding ability when tightening than screws used on our Traditional Series NavPod. For Gen3 NavPods we provide nickel chrome-plated stainless steel tamperproof screws for security combined with a little style!Commitment to quality We stand behind our commitment by offering a 10-year warranty on all new Gen3 NavPods.Specifications Overall Height 7.75 Width 16.75 Depth 4.375 Usable Face Height 6 Width 15 Depth 3.125 Max Cutout Height 5.5 Width 14.25

    $332.88

  • Navpod GP2500 SystemPod for 12" wide guard

    Navpod Navpod GP2500 SystemPod for 12" wide guard

    NAVGP2500 SystemPodModel: GP2500SystemPod Un-Cut (usable face = 15.0"w x 6.0"h)(38.1cm w x 15.2cm h) for 12" wide guardSystemPods are for mounting a Radar or Chartplotter and Instruments together at the helm. Navigation at your finger tips. "Where you need it, when you need it". SystemPods are the smart solution for mounting your Radar or Chartplotter and Instruments together at the helm where you can easily operate and clearly see the fine details of the screen.A SystemPod is best mounted on a Single Bend AngleGuard.Structural Rigidity — The Gen3 enhancements now include a thicker gauge acrylic capped ABS material that improves strength and provides better structural rigidity. This thicker material allows for a larger waterproof seal. The better the structural rigidity, the less flexing when tightening and more uniform pressure on the seal. The excellent UV stability of the acrylic is combined with the durability of the ABS. The acrylic cap protects the ABS from UV and its potentially damaging effects on plastic.Waterproof Seal — All SystemPods are manufactured with a double gasket system providing an excellent watertight seal. This seal provides the best protection of your Marine Electronics. SystemPods are made to withstand the harshest wet offshore boating conditions. Gen3 enhancements include a thicker external silicone gasket with improved flush fit. The internal Poran Microcell Polyurathane gasket is now 50% thicker and is not subject to "compression set" like many rubber compounds. This is important when you need to open the SystemPod in the future in order to service your electronics. The gasket will continue to do its job.Nickel Chrome Plated Stainless Steel — We use all 316 stainless steel hardware that is supplied with each NavPod. Large round head tamperproof screws have deeper sockets for the NavPod wrench for better holding ability when tightening than screws used on our Traditional Series NavPod. For Gen3 NavPods we provide nickel chrome-plated stainless steel tamperproof screws for security combined with a little style!Commitment to quality We stand behind our commitment by offering a 10-year warranty on all new Gen3 NavPods.Specifications Overall Height 7.75 Width 16.75 Depth 4.375 Usable Face Height 6 Width 15 Depth 3.125 Max Cutout Height 5.5 Width 14.25

    $315.35

  • Navpod GP2401 InstrumentPod for 12" wide guard

    Navpod Navpod GP2401 InstrumentPod for 12" wide guard

    NAVGP2401 InstrumentPodModel: GP2401InstrumentPod Pre-Cut for four instruments (3.6" holes) for 12" wide guardThe GP2401 InstumentPod comes Pre-Cut for mounting four Instruments on a 12" wide guard. The Pre-cut hole is 3.6" in diameter found on popular 110mm instruments. An InstrumentPod is best mounted on a StraightGuard or on the upper portion of a Double Bend AngleGuard with a SailPod mounted below.Specifications Overall Height 6.5 Width 21.875 Depth 4.33 Usable Face Height 5 Width 19.5 Depth 3.125 Max Cutout Height 4.125 Width 19.3

    $376.67

  • Navpod GP2400 InstrumentPod for 12" wide guard

    Navpod Navpod GP2400 InstrumentPod for 12" wide guard

    NAVGP2400 InstrumentPodModel: GP2400InstrumentPod Un-Cut (usable face = 19.5"w x 5"h)(49.5cm W x 11.4cm H) for 12" wide guardThe GP2400 InstumentPod comes Un-Cut and is for mounting to a 12" wide guard. Information at your finger tips. An InstrumentPod is best mounted on a StraightGuard or on the upper portion of a Double Bend AngleGuard with a SailPod mounted below. Usable face = 20.375"w x 5"h (58.7cm W x 11.4cm H)Specifications Overall Height 6.5 Width 21.875 Depth 4.33 Usable Face Height 5 Width 19.5 Depth 3.125 Max Cutout Height 4.125 Width 19.3

    $359.15

  • Navpod GP2302 InstrumentPod for three instruments

    Navpod Navpod GP2302 InstrumentPod for three instruments

    NAVGP2302 InstrumentPodModel: GP2302InstrumentPod Pre-Cut for three instruments (Simrad IS42 / B&G Triton /AP44 square holes) for 12" wide guardThe GP2302 InstumentPod comes Pre-Cut for mounting three Simrad IS42 / B&G Triton /AP44 square hole Instruments on a 12" wide guard. An InstrumentPod is best mounted on a StraightGuard or on the upper portion of a Double Bend AngleGuard with a SailPod mounted below.Specifications Overall Height 6.25 Width 16.625 Depth 4.375 Usable Face Height 5 Width 15.3 Depth 3.125 Max Cutout Height 4.125 Width 14.5

    $332.88

  • Navpod GP2300 InstrumentPod for 12" wide guard

    Navpod Navpod GP2300 InstrumentPod for 12" wide guard

    NAVGP2300 InstrumentPodModel: GP2300InstrumentPod Un-Cut (usable face = 15.3"w x 5"h)(38.9cm W x 12.7cm H) for 12" wide guardThe GP2300 InstumentPod comes Un-Cut and is for mounting to a 12" wide guard. Information at your finger tips. An InstrumentPod is best mounted on a StraightGuard or on the upper portion of a Double Bend AngleGuard with a SailPod mounted below. Usable face = 15.3"w x 5"h (46cm W x 11.4cm H)Specifications Overall Height 6.25 Width 16.625 Depth 4.375 Usable Face Height 5 Width 15.3 Depth 3.125 Max Cutout Height 4.125 Width 14.5

    $315.35

  • NAVPOD GP2205 SailPod for Raymarine eS127/128

    Navpod NAVPOD GP2205 SailPod for Raymarine eS127/128

    NAVGP2205 SailPodModel: GP2205SailPod Pre-Cut for Raymarine eS127/eS128 & AXIOM PRO 12 for 12" wide guardSailPods are for mounting a single Radar or Chartplotter at the helm. Navigation at your finger tips. "Where you need it, when you need it". Sail Pods are the smart solution for mounting your Radar or Chartplotter at the helm where you can easily operate and clearly see the fine details of the screen. NavPods have a high gloss finish, giving you a clean mounting solution while concealing unsightly wires. Nickel Chrome plated tamperproof screws provide a little bling and a lot of security. Designed with a double gasket waterproof seal, NavPods protect your electronics from the harshest of wet offshore boating conditions. A SailPod is best mounted on a Single Bend AngleGuard or use a Double Bend AngleGuard to fit an InstrumentPod on the top vertical section and SailPod below on the angled section.Structural Rigidity — The Gen3 enhancements now include a thicker gauge acrylic capped ABS material that improves strength and provides better structural rigidity. This thicker material allows for a larger waterproof seal. The better the structural rigidity, the less flexing when tightening and more uniform pressure on the seal. The excellent UV stability of the acrylic is combined with the durability of the ABS. The acrylic cap protects the ABS from UV and its potentially damaging effects on plastic.Waterproof Seal — All SailPods are manufactured with a double gasket system providing an excellent watertight seal. This seal provides the best protection of your Marine Electronics. SailPods are made to withstand the harshest wet offshore boating conditions. Gen3 enhancements include a thicker external silicone gasket with improved flush fit. The internal Poran Microcell Polyurathane gasket is now 50% thicker and is not subject to "compression set" like many rubber compounds. This is important when you need to open the SailPod in the future in order to service your electronics. The gasket will continue to do its job.Nickel Chrome Plated Stainless Steel — We use all 316 stainless steel hardware that is supplied with each NavPod. Large round head tamperproof screws have deeper sockets for the NavPod wrench for better holding ability when tightening than screws used on our Traditional Series NavPod. For Gen3 NavPods we provide nickel chrome-plated stainless steel tamperproof screws for security combined with a little style!Commitment to quality We stand behind our commitment by offering a 10-year warranty on all new Gen3 NavPods.Specifications Overall Height 11.3 Width 16.5 Depth 5.55 Usable Face Height 9.85 Width 15.18 Depth 4.25 Max Cutout Height 9 Width 14.25

    $437.99

  • NAVPOD GP2204 SailPod for Raymarine a125/127/128

    Navpod NAVPOD GP2204 SailPod for Raymarine a125/127/128

    NAVGP2204 SailPodModel: GP2204SailPod Pre-Cut for Raymarine a125/a127/a128 for 12" wide guardSailPods are for mounting a single Radar or Chartplotter at the helm. Navigation at your finger tips. "Where you need it,when you need it". Sail Pods are the smart solution for mounting your Radar or Chartplotter at the helm where you can easily operate and clearly see the fine details of the screen. NavPods have a high gloss finish, giving you a clean mounting solution while concealing unsightly wires. Nickel Chrome plated tamperproof screws provide a little bling and a lot of security. Designed with a double gasket waterproof seal, NavPods protect your electronics from the harshest of wet offshore boating conditions. A SailPod is best mounted on a Single Bend AngleGuard or use a Double Bend AngleGuard to fit an InstrumentPod on the top vertical section and SailPod below on the angled section.Structural Rigidity — The Gen3 enhancements now include a thicker gauge acrylic capped ABS material that improves strength and provides better structural rigidity. This thicker material allows for a larger waterproof seal. The better the structural rigidity, the less flexing when tightening and more uniform pressure on the seal. The excellent UV stability of the acrylic is combined with the durability of the ABS. The acrylic cap protects the ABS from UV and its potentially damaging effects on plastic.Waterproof Seal — All SailPods are manufactured with a double gasket system providing an excellent watertight seal. This seal provides the best protection of your Marine Electronics. SailPods are made to withstand the harshest wet offshore boating conditions. Gen3 enhancements include a thicker external silicone gasket with improved flush fit. The internal Poran Microcell Polyurathane gasket is now 50% thicker and is not subject to "compression set" like many rubber compounds. This is important when you need to open the SailPod in the future in order to service your electronics. The gasket will continue to do its job.Nickel Chrome Plated Stainless Steel — We use all 316 stainless steel hardware that is supplied with each NavPod. Large round head tamperproof screws have deeper sockets for the NavPod wrench for better holding ability when tightening than screws used on our Traditional Series NavPod. For Gen3 NavPods we provide nickel chrome-plated stainless steel tamperproof screws for security combined with a little style!Commitment to quality We stand behind our commitment by offering a 10-year warranty on all new Gen3 NavPods.Specifications Overall Height 11.3 Width 16.5 Depth 5.55 Usable Face Height 9.85 Width 15.18 Depth 4.25 Max Cutout Height 9 Width 14.25

    $437.99

  • NAVPOD GP2203 SailPod for Raymarine c125/127

    Navpod NAVPOD GP2203 SailPod for Raymarine c125/127

    NAVGP2203 SailPodModel: GP2203SailPod Pre-Cut for Raymarine c125/c127/e125/e127 for 12" wide guardSailPods are for mounting a single Radar or Chartplotter at the helm. Navigation at your finger tips. "Where you need it,when you need it". Sail Pods are the smart solution for mounting your Radar or Chartplotter at the helm where you can easily operate and clearly see the fine details of the screen. NavPods have a high gloss finish, giving you a clean mounting solution while concealing unsightly wires. Nickel Chrome plated tamperproof screws provide a little bling and a lot of security. Designed with a double gasket waterproof seal, NavPods protect your electronics from the harshest of wet offshore boating conditions. A SailPod is best mounted on a Single Bend AngleGuard or use a Double Bend AngleGuard to fit an InstrumentPod on the top vertical section and SailPod below on the angled section.Structural Rigidity — The Gen3 enhancements now include a thicker gauge acrylic capped ABS material that improves strength and provides better structural rigidity. This thicker material allows for a larger waterproof seal. The better the structural rigidity, the less flexing when tightening and more uniform pressure on the seal. The excellent UV stability of the acrylic is combined with the durability of the ABS. The acrylic cap protects the ABS from UV and its potentially damaging effects on plastic.Waterproof Seal — All SailPods are manufactured with a double gasket system providing an excellent watertight seal. This seal provides the best protection of your Marine Electronics. SailPods are made to withstand the harshest wet offshore boating conditions. Gen3 enhancements include a thicker external silicone gasket with improved flush fit. The internal Poran Microcell Polyurathane gasket is now 50% thicker and is not subject to "compression set" like many rubber compounds. This is important when you need to open the SailPod in the future in order to service your electronics. The gasket will continue to do its job.Nickel Chrome Plated Stainless Steel — We use all 316 stainless steel hardware that is supplied with each NavPod. Large round head tamperproof screws have deeper sockets for the NavPod wrench for better holding ability when tightening than screws used on our Traditional Series NavPod. For Gen3 NavPods we provide nickel chrome-plated stainless steel tamperproof screws for security combined with a little style!Commitment to quality We stand behind our commitment by offering a 10-year warranty on all new Gen3 NavPods.Specifications Overall Height 11.3 Width 16.5 Depth 5.5 Usable Face Height 9.85 Width 15.18 Depth 4.75 Max Cutout Height 9 Width 14.25

    $437.99

  • NAVPOD GP2201 SailPod for Garmin1020/1040

    Navpod NAVPOD GP2201 SailPod for Garmin1020/1040

    NAVGP2201 SailPodModel: GP2201SailPod Pre-Cut for Garmin GPSMAP 1020/1020xs/1040xs for 12" wide guardSailPods are for mounting a single Radar or Chartplotter at the helm. Navigation at your finger tips. "Where you need it,when you need it". Sail Pods are the smart solution for mounting your Radar or Chartplotter at the helm where you can easily operate and clearly see the fine details of the screen. NavPods have a high gloss finish, giving you a clean mounting solution while concealing unsightly wires. Nickel Chrome plated tamperproof screws provide a little bling and a lot of security. Designed with a double gasket waterproof seal, NavPods protect your electronics from the harshest of wet offshore boating conditions. A SailPod is best mounted on a Single Bend AngleGuard or use a Double Bend AngleGuard to fit an InstrumentPod on the top vertical section and SailPod below on the angled section.Structural Rigidity — The Gen3 enhancements now include a thicker gauge acrylic capped ABS material that improves strength and provides better structural rigidity. This thicker material allows for a larger waterproof seal. The better the structural rigidity, the less flexing when tightening and more uniform pressure on the seal. The excellent UV stability of the acrylic is combined with the durability of the ABS. The acrylic cap protects the ABS from UV and its potentially damaging effects on plastic.Waterproof Seal — All SailPods are manufactured with a double gasket system providing an excellent watertight seal. This seal provides the best protection of your Marine Electronics. SailPods are made to withstand the harshest wet offshore boating conditions. Gen3 enhancements include a thicker external silicone gasket with improved flush fit. The internal Poran Microcell Polyurathane gasket is now 50% thicker and is not subject to "compression set" like many rubber compounds. This is important when you need to open the SailPod in the future in order to service your electronics. The gasket will continue to do its job.Nickel Chrome Plated Stainless Steel — We use all 316 stainless steel hardware that is supplied with each NavPod. Large round head tamperproof screws have deeper sockets for the NavPod wrench for better holding ability when tightening than screws used on our Traditional Series NavPod. For Gen3 NavPods we provide nickel chrome-plated stainless steel tamperproof screws for security combined with a little style!Commitment to quality We stand behind our commitment by offering a 10-year warranty on all new Gen3 NavPods.Specifications Overall Height 11.3 Width 16.5 Depth 5.55 Usable Face Height 9.85 Width 15.18 Depth 4.25 Max Cutout Height 9 Width 14.25

    $437.99

  • NAVPOD GP2200-16 SailPod for Garmin GPSMAP 1242/1222

    Navpod NAVPOD GP2200-16 SailPod for Garmin GPSMAP 1242/1222

    NAVGP220016 SailPodModel: GP2200-16SailPod Pre-Cut for Garmin GPSMAP 1242xsv TOUCH/1222xsv TOUCH/1222 TOUCH, for 12? wide guardSailPods are for mounting a single Radar or Chartplotter at the helm. Navigation at your finger tips. "Where you need it?when you need it". Sail Pods are the smart solution for mounting your Radar or Chartplotter at the helm where you can easily operate and clearly see the fine details of the screen. NavPods have a high gloss finish, giving you a clean mounting solution while concealing unsightly wires. Nickel Chrome plated tamperproof screws provide a little bling and a lot of security. Designed with a double gasket waterproof seal, NavPods protect your electronics from the harshest of wet offshore boating conditions. A SailPod is best mounted on a Single Bend AngleGuard or use a Double Bend AngleGuard to fit an InstrumentPod on the top vertical section and SailPod below on the angled section.Structural Rigidity — The Gen3 enhancements now include a thicker gauge acrylic capped ABS material that improves strength and provides better structural rigidity. This thicker material allows for a larger waterproof seal. The better the structural rigidity, the less flexing when tightening and more uniform pressure on the seal. The excellent UV stability of the acrylic is combined with the durability of the ABS. The acrylic cap protects the ABS from UV and its potentially damaging effects on plastic.Waterproof Seal — All SailPods are manufactured with a double gasket system providing an excellent watertight seal. This seal provides the best protection of your Marine Electronics. SailPods are made to withstand the harshest wet offshore boating conditions. Gen3 enhancements include a thicker external silicone gasket with improved flush fit. The internal Poran Microcell Polyurathane gasket is now 50% thicker and is not subject to "compression set" like many rubber compounds. This is important when you need to open the SailPod in the future in order to service your electronics. The gasket will continue to do its job.Nickel Chrome Plated Stainless Steel — We use all 316 stainless steel hardware that is supplied with each NavPod. Large round head tamperproof screws have deeper sockets for the NavPod wrench for better holding ability when tightening than screws used on our Traditional Series NavPod. For Gen3 NavPods we provide nickel chrome-plated stainless steel tamperproof screws for security combined with a little style!Commitment to quality We stand behind our commitment by offering a 10-year warranty on all new Gen3 NavPods.Specifications Overall Height 11.3 Width 16.5 Depth 5.55 Usable Face Height 9.85 Width 15.18 Depth 4.25 Max Cutout Height 9 Width 14.25

    $437.99

  • NAVPOD GP2200-14 SailPod for Simrad NSS12 evo3

    Navpod NAVPOD GP2200-14 SailPod for Simrad NSS12 evo3

    NAVGP220014 SailPodModel: GP2200-14SailPod Pre-Cut for Simrad NSS12 evo3 / B&G Zeus3 12 for 12? wide guardSailPods are for mounting a single Radar or Chartplotter at the helm. Navigation at your finger tips. "Where you need it?when you need it". Sail Pods are the smart solution for mounting your Radar or Chartplotter at the helm where you can easily operate and clearly see the fine details of the screen. NavPods have a high gloss finish, giving you a clean mounting solution while concealing unsightly wires. Nickel Chrome plated tamperproof screws provide a little bling and a lot of security. Designed with a double gasket waterproof seal, NavPods protect your electronics from the harshest of wet offshore boating conditions. A SailPod is best mounted on a Single Bend AngleGuard or use a Double Bend AngleGuard to fit an InstrumentPod on the top vertical section and SailPod below on the angled section.Structural Rigidity — The Gen3 enhancements now include a thicker gauge acrylic capped ABS material that improves strength and provides better structural rigidity. This thicker material allows for a larger waterproof seal. The better the structural rigidity, the less flexing when tightening and more uniform pressure on the seal. The excellent UV stability of the acrylic is combined with the durability of the ABS. The acrylic cap protects the ABS from UV and its potentially damaging effects on plastic.Waterproof Seal — All SailPods are manufactured with a double gasket system providing an excellent watertight seal. This seal provides the best protection of your Marine Electronics. SailPods are made to withstand the harshest wet offshore boating conditions. Gen3 enhancements include a thicker external silicone gasket with improved flush fit. The internal Poran Microcell Polyurathane gasket is now 50% thicker and is not subject to "compression set" like many rubber compounds. This is important when you need to open the SailPod in the future in order to service your electronics. The gasket will continue to do its job.Nickel Chrome Plated Stainless Steel — We use all 316 stainless steel hardware that is supplied with each NavPod. Large round head tamperproof screws have deeper sockets for the NavPod wrench for better holding ability when tightening than screws used on our Traditional Series NavPod. For Gen3 NavPods we provide nickel chrome-plated stainless steel tamperproof screws for security combined with a little style!Commitment to quality We stand behind our commitment by offering a 10-year warranty on all new Gen3 NavPods.Specifications Overall Height 11.3 Width 16.5 Depth 5.5 Usable Face Height 9.85 Width 15.18 Depth 4.25 Max Cutout Height 9 Width 14.25

    $437.99

  • NAVPOD GP2200-13 SailPod for Garmin GPSMAP 1242/1222

    Navpod NAVPOD GP2200-13 SailPod for Garmin GPSMAP 1242/1222

    NAVGP220013 SailPodModel: GP2200-13SailPod Pre-Cut for Garmin GPSMAP 1242xsv/1222xsv/1222, for 12? wide guardSailPods are for mounting a single Radar or Chartplotter at the helm. Navigation at your finger tips. "Where you need it?when you need it". Sail Pods are the smart solution for mounting your Radar or Chartplotter at the helm where you can easily operate and clearly see the fine details of the screen. NavPods have a high gloss finish, giving you a clean mounting solution while concealing unsightly wires. Nickel Chrome plated tamperproof screws provide a little bling and a lot of security. Designed with a double gasket waterproof seal, NavPods protect your electronics from the harshest of wet offshore boating conditions. A SailPod is best mounted on a Single Bend AngleGuard or use a Double Bend AngleGuard to fit an InstrumentPod on the top vertical section and SailPod below on the angled section.Structural Rigidity — The Gen3 enhancements now include a thicker gauge acrylic capped ABS material that improves strength and provides better structural rigidity. This thicker material allows for a larger waterproof seal. The better the structural rigidity, the less flexing when tightening and more uniform pressure on the seal. The excellent UV stability of the acrylic is combined with the durability of the ABS. The acrylic cap protects the ABS from UV and its potentially damaging effects on plastic.Waterproof Seal — All SailPods are manufactured with a double gasket system providing an excellent watertight seal. This seal provides the best protection of your Marine Electronics. SailPods are made to withstand the harshest wet offshore boating conditions. Gen3 enhancements include a thicker external silicone gasket with improved flush fit. The internal Poran Microcell Polyurathane gasket is now 50% thicker and is not subject to "compression set" like many rubber compounds. This is important when you need to open the SailPod in the future in order to service your electronics. The gasket will continue to do its job.Nickel Chrome Plated Stainless Steel — We use all 316 stainless steel hardware that is supplied with each NavPod. Large round head tamperproof screws have deeper sockets for the NavPod wrench for better holding ability when tightening than screws used on our Traditional Series NavPod. For Gen3 NavPods we provide nickel chrome-plated stainless steel tamperproof screws for security combined with a little style!Commitment to quality We stand behind our commitment by offering a 10-year warranty on all new Gen3 NavPods.Specifications Overall Height 11.3 Width 16.5 Depth 5.5 Usable Face Height 9.85 Width 15.18 Depth 4.25 Max Cutout Height 9 Width 14.25

    $437.99

  • NAVPOD GP2200-12 SailPod for Garmin 7412/7612

    Navpod NAVPOD GP2200-12 SailPod for Garmin 7412/7612

    NAVGP220012 SailPodModel: GP2200-12SailPod Pre-Cut for Garmin GPSMAP 7412/7412xsv/7612/7612xsv 12? wide guardSailPods are for mounting a single Radar or Chartplotter at the helm. Navigation at your finger tips. "Where you need it?when you need it". Sail Pods are the smart solution for mounting your Radar or Chartplotter at the helm where you can easily operate and clearly see the fine details of the screen. NavPods have a high gloss finish, giving you a clean mounting solution while concealing unsightly wires. Nickel Chrome plated tamperproof screws provide a little bling and a lot of security. Designed with a double gasket waterproof seal, NavPods protect your electronics from the harshest of wet offshore boating conditions. A SailPod is best mounted on a Single Bend AngleGuard or use a Double Bend AngleGuard to fit an InstrumentPod on the top vertical section and SailPod below on the angled section.Structural Rigidity — The Gen3 enhancements now include a thicker gauge acrylic capped ABS material that improves strength and provides better structural rigidity. This thicker material allows for a larger waterproof seal. The better the structural rigidity, the less flexing when tightening and more uniform pressure on the seal. The excellent UV stability of the acrylic is combined with the durability of the ABS. The acrylic cap protects the ABS from UV and its potentially damaging effects on plastic.Waterproof Seal — All SailPods are manufactured with a double gasket system providing an excellent watertight seal. This seal provides the best protection of your Marine Electronics. SailPods are made to withstand the harshest wet offshore boating conditions. Gen3 enhancements include a thicker external silicone gasket with improved flush fit. The internal Poran Microcell Polyurathane gasket is now 50% thicker and is not subject to "compression set" like many rubber compounds. This is important when you need to open the SailPod in the future in order to service your electronics. The gasket will continue to do its job.Nickel Chrome Plated Stainless Steel — We use all 316 stainless steel hardware that is supplied with each NavPod. Large round head tamperproof screws have deeper sockets for the NavPod wrench for better holding ability when tightening than screws used on our Traditional Series NavPod. For Gen3 NavPods we provide nickel chrome-plated stainless steel tamperproof screws for security combined with a little style!Commitment to quality We stand behind our commitment by offering a 10-year warranty on all new Gen3 NavPods.Specifications Overall Height 11.3 Width 16.5 Depth 5.55 Usable Face Height 9.85 Width 15.18 Depth 4.25 Max Cutout Height 9 Width 14.25

    $437.99

  • NAVPOD GP2200 SailPod for 12" wide guard

    Navpod NAVPOD GP2200 SailPod for 12" wide guard

    NAVGP22200 SailPodModel: GP2200SailPod Un-Cut (usable face = 15.18"w x 9.85"h)(38.6cm w x 25cm h) for 12" wide guardSailPods are for mounting a single Radar or Chartplotter at the helm. Navigation at your finger tips. "Where you need it,when you need it". Sail Pods are the smart solution for mounting your Radar or Chartplotter at the helm where you can easily operate and clearly see the fine details of the screen. NavPods have a high gloss finish, giving you a clean mounting solution while concealing unsightly wires. Nickel Chrome plated tamperproof screws provide a little bling and a lot of security. Designed with a double gasket waterproof seal, NavPods protect your electronics from the harshest of wet offshore boating conditions. A SailPod is best mounted on a Single Bend AngleGuard or use a Double Bend AngleGuard to fit an InstrumentPod on the top vertical section and SailPod below on the angled section.Structural Rigidity — The Gen3 enhancements now include a thicker gauge acrylic capped ABS material that improves strength and provides better structural rigidity. This thicker material allows for a larger waterproof seal. The better the structural rigidity, the less flexing when tightening and more uniform pressure on the seal. The excellent UV stability of the acrylic is combined with the durability of the ABS. The acrylic cap protects the ABS from UV and its potentially damaging effects on plastic.Waterproof Seal — All SailPods are manufactured with a double gasket system providing an excellent watertight seal. This seal provides the best protection of your Marine Electronics. SailPods are made to withstand the harshest wet offshore boating conditions. Gen3 enhancements include a thicker external silicone gasket with improved flush fit. The internal Poran Microcell Polyurathane gasket is now 50% thicker and is not subject to "compression set" like many rubber compounds. This is important when you need to open the SailPod in the future in order to service your electronics. The gasket will continue to do its job.Nickel Chrome Plated Stainless Steel — We use all 316 stainless steel hardware that is supplied with each NavPod. Large round head tamperproof screws have deeper sockets for the NavPod wrench for better holding ability when tightening than screws used on our Traditional Series NavPod. For Gen3 NavPods we provide nickel chrome-plated stainless steel tamperproof screws for security combined with a little style!Commitment to quality We stand behind our commitment by offering a 10-year warranty on all new Gen3 NavPods.Specifications Overall Height 11.3 Width 16.5 Depth 5.55 Usable Face Height 9.85 Width 15.18 Depth 4.25 Max Cutout Height 9 Width 14.25

    $420.48

  • Navpod GP2176 Systempod Precut Simrad NSS12 EVO2

    Navpod Navpod GP2176 Systempod Precut Simrad NSS12 EVO2

    NavPod GP2176 SystemPod Pre-Cut for Simrad NSS12 evo2 / B&G Zeus2 12 and two Instruments for 12" wide guard NavPod GP2170 Series for 12" Guard, SystemPods for Sail are for mounting multiple pieces of electronics in one NavPod. This is a good way to reduce the height of a system. In addition to mounting a radar or chartplotter, you can have room for an autopilot, instrument, stereo controller, or VHF mic. A SystemPod is best mounted on a Single Bend AngleGuards . SystemPods for Power are for mounting on a SK135 Stachion Kit can be used to mount a SystemPod on a flat surface, such as the flybridge. Stachion Kits can also be used with a SystemPod for overhead mounting applications. H W D Overall Size 11.75" 23.25" 6.75" Usable Face 9.9" 20.5" 20" Max Cutout 9.125" 20" All SystemPods include Acrylic capped ABS plastic Chromed stainless steel tamper-poof fasteners Double seal for watertight integrity Models are available pre-cut for popular electronics. Stainless steel mounting hardware and mounting gaskets.

    $464.28

  • Navpod GP2174 Systempod Precut Raymarine C/E 125/127

    Navpod Navpod GP2174 Systempod Precut Raymarine C/E 125/127

    NavPod GP2174 SystemPod Pre-Cut for Raymarine c125 / c1277 / e125 / e127 and two 3.6" holes for 12" wide guard NavPod GP2170 Series for 12" Guard, SystemPods for Sail are for mounting multiple pieces of electronics in one NavPod. This is a good way to reduce the height of a system. In addition to mounting a radar or chartplotter, you can have room for an autopilot, instrument, stereo controller, or VHF mic. A SystemPod is best mounted on a Single Bend AngleGuards . SystemPods for Power are for mounting on a SK135 Stachion Kit can be used to mount a SystemPod on a flat surface, such as the flybridge. Stachion Kits can also be used with a SystemPod for overhead mounting applications. H W D Overall Size 11.75" 23.25" 6.75" Usable Face 9.9" 20.5" 20" Max Cutout 9.125" 20" All SystemPods include Acrylic capped ABS plastic Chromed stainless steel tamper-poof fasteners Double seal for watertight integrity Models are available pre-cut for popular electronics. Stainless steel mounting hardware and mounting gaskets.

    $464.28

  • NAVPOD GP2173 SystemPod for Raymarine C120W/E120W

    Navpod NAVPOD GP2173 SystemPod for Raymarine C120W/E120W

    NAVPOD GP2173 SystemPodModel: GP2173SystemPod Pre-Cut for Raymarine C120W/E120W and 2 inst. (3.6" holes) for 12" wide guardSystemPods are for mounting a Radar or Chartplotter and Instruments together at the helm. Navigation at your finger tips. Where you ned it, when you need it . SystemPods are the smart solution for mounting your Radar or Chartplotter and Instruments together at the helm where you can easily operate and clearly see the fine details of the screen.A SystemPod is best mounted on a Single Bend AngleGuard.Structural Rigidity — The Gen3 enhancements now include a thicker gauge acrylic capped ABS material that improves strength and provides better structural rigidity. This thicker material allows for a larger waterproof seal. The better the structural rigidity, the less flexing when tightening and more uniform pressure on the seal. The excellent UV stability of the acrylic is combined with the durability of the ABS. The acrylic cap protects the ABS from UV and its potentially damaging effects on plastic.Waterproof Seal — All SystemPods are manufactured with a double gasket system providing an excellent watertight seal. This seal provides the best protection of your Marine Electronics. SystemPods are made to withstand the harshest wet offshore boating conditions. Gen3 enhancements include a thicker external silicone gasket with improved flush fit. The internal Poran Microcell Polyurathane gasket is now 50% thicker and is not subject to compression set like many rubber compounds. This is important when you need to open the SystemPod in the future in order to service your electronics. The gasket will continue to do its job.Nickel Chrome Plated Stainless Steel — We use all 316 stainless steel hardware that is supplied with each NavPod. Large round head tamperproof screws have deeper sockets for the NavPod wrench for better holding ability when tightening than screws used on our Traditional Series NavPod. For Gen3 NavPods we provide nickel chrome-plated stainless steel tamperproof screws for security combined with a little style!Commitment to quality We stand behind our commitment by offering a 10-year warranty on all new Gen3 NavPods.Specifications Overall Height 11.88 Width 23.25 Depth 6.42 Usable Face Height 9.64 Width 20.77 Depth 5.25 Max Cutout Height 9.5 Width 20.75

    $464.28

  • NAVPOD GP2170-64 SystemPod for Simrad NSS12

    Navpod NAVPOD GP2170-64 SystemPod for Simrad NSS12

    NAVGP217064 SystemPodModel: GP2170-64SystemPod Pre-Cut for Simrad NSS12/B&G Zeus Touch 12 and 2 inst. (Simrad IS42 / B&G Triton /AP44 square holes) for 12? wide guardSystemPods are for mounting a Radar or Chartplotter and Instruments together at the helm. Navigation at your finger tips. Where you nee it t when you need it . SystemPods are the smart solution for mounting your Radar or Chartplotter and Instruments together at the helm where you can easily operate and clearly see the fine details of the screen.A SystemPod is best mounted on a Single Bend AngleGuard.Structural Rigidity — The Gen3 enhancements now include a thicker gauge acrylic capped ABS material that improves strength and provides better structural rigidity. This thicker material allows for a larger waterproof seal. The better the structural rigidity, the less flexing when tightening and more uniform pressure on the seal. The excellent UV stability of the acrylic is combined with the durability of the ABS. The acrylic cap protects the ABS from UV and its potentially damaging effects on plastic.Waterproof Seal — All SystemPods are manufactured with a double gasket system providing an excellent watertight seal. This seal provides the best protection of your Marine Electronics. SystemPods are made to withstand the harshest wet offshore boating conditions. Gen3 enhancements include a thicker external silicone gasket with improved flush fit. The internal Poran Microcell Polyurathane gasket is now 50% thicker and is not subject to compression set like many rubber compounds. This is important when you need to open the SystemPod in the future in order to service your electronics. The gasket will continue to do its job.Nickel Chrome Plated Stainless Steel — We use all 316 stainless steel hardware that is supplied with each NavPod. Large round head tamperproof screws have deeper sockets for the NavPod wrench for better holding ability when tightening than screws used on our Traditional Series NavPod. For Gen3 NavPods we provide nickel chrome-plated stainless steel tamperproof screws for security combined with a little style!Commitment to quality We stand behind our commitment by offering a 10-year warranty on all new Gen3 NavPods.Specifications Overall Height 11.88 Width 23.25 Depth 6.2 Usable Face Height 9.64 Width 20.77 Depth 5.25 Max Cutout Height 9.5 Width 20.75

    $464.28

  • NAVPOD GP2170-63 SystemPod for Simrad NSS12

    Navpod NAVPOD GP2170-63 SystemPod for Simrad NSS12

    NAVGP217063 SystemPodModel: GP2170-63SystemPod Pre-Cut for Simrad NSS12/B&G Zeus Touch 12 and 2 inst. (3.6? holes) for 12? wide guardSystemPods are for mounting a Radar or Chartplotter and Instruments together at the helm. Navigation at your finger tips. Where you nee it t when you need it . SystemPods are the smart solution for mounting your Radar or Chartplotter and Instruments together at the helm where you can easily operate and clearly see the fine details of the screen.A SystemPod is best mounted on a Single Bend AngleGuard.Structural Rigidity — The Gen3 enhancements now include a thicker gauge acrylic capped ABS material that improves strength and provides better structural rigidity. This thicker material allows for a larger waterproof seal. The better the structural rigidity, the less flexing when tightening and more uniform pressure on the seal. The excellent UV stability of the acrylic is combined with the durability of the ABS. The acrylic cap protects the ABS from UV and its potentially damaging effects on plastic.Waterproof Seal — All SystemPods are manufactured with a double gasket system providing an excellent watertight seal. This seal provides the best protection of your Marine Electronics. SystemPods are made to withstand the harshest wet offshore boating conditions. Gen3 enhancements include a thicker external silicone gasket with improved flush fit. The internal Poran Microcell Polyurathane gasket is now 50% thicker and is not subject to compression set like many rubber compounds. This is important when you need to open the SystemPod in the future in order to service your electronics. The gasket will continue to do its job.Nickel Chrome Plated Stainless Steel — We use all 316 stainless steel hardware that is supplied with each NavPod. Large round head tamperproof screws have deeper sockets for the NavPod wrench for better holding ability when tightening than screws used on our Traditional Series NavPod. For Gen3 NavPods we provide nickel chrome-plated stainless steel tamperproof screws for security combined with a little style!Commitment to quality We stand behind our commitment by offering a 10-year warranty on all new Gen3 NavPods.Specifications Overall Height 11.88 Width 23.25 Depth 6.42 Usable Face Height 9.64 Width 20.77 Depth 5.25 Max Cutout Height 9.5 Width 20.75

    $464.28

  • NAVPOD GP2170-22 SystemPod for Garmin GPSMAP 1242/1222

    Navpod NAVPOD GP2170-22 SystemPod for Garmin GPSMAP 1242/1222

    NAVGP217022 SystemPodModel: GP2170-22SystemPod Pre-Cut for Garmin GPSMAP 1242xsvTOUCH/1222xsvTOUCH/1222TOUCH and 2 inst. (3.6? holes) for 12? wide guardSystemPods are for mounting a Radar or Chartplotter and Instruments together at the helm. Navigation at your finger tips. Where you need it when you need it . SystemPods are the smart solution for mounting your Radar or Chartplotter and Instruments together at the helm where you can easily operate and clearly see the fine details of the screen.A SystemPod is best mounted on a Single Bend AngleGuard.Structural Rigidity — The Gen3 enhancements now include a thicker gauge acrylic capped ABS material that improves strength and provides better structural rigidity. This thicker material allows for a larger waterproof seal. The better the structural rigidity, the less flexing when tightening and more uniform pressure on the seal. The excellent UV stability of the acrylic is combined with the durability of the ABS. The acrylic cap protects the ABS from UV and its potentially damaging effects on plastic.Waterproof Seal — All SystemPods are manufactured with a double gasket system providing an excellent watertight seal. This seal provides the best protection of your Marine Electronics. SystemPods are made to withstand the harshest wet offshore boating conditions. Gen3 enhancements include a thicker external silicone gasket with improved flush fit. The internal Poran Microcell Polyurathane gasket is now 50% thicker and is not subject to compression set like many rubber compounds. This is important when you need to open the SystemPod in the future in order to service your electronics. The gasket will continue to do its job.Nickel Chrome Plated Stainless Steel — We use all 316 stainless steel hardware that is supplied with each NavPod. Large round head tamperproof screws have deeper sockets for the NavPod wrench for better holding ability when tightening than screws used on our Traditional Series NavPod. For Gen3 NavPods we provide nickel chrome-plated stainless steel tamperproof screws for security combined with a little style!Commitment to quality We stand behind our commitment by offering a 10-year warranty on all new Gen3 NavPods.Specifications Overall Height 11.88 Width 23.25 Depth 6.42 Usable Face Height 9.64 Width 20.77 Depth 5.25 Max Cutout Height 9.5 Width 20.75

    $464.28

  • NAVPOD GP2170-21 SystemPod for Simrad GO12-XSE

    Navpod NAVPOD GP2170-21 SystemPod for Simrad GO12-XSE

    NAVGP217021 SystemPodModel: GP2170-21SystemPod Pre-Cut for Simrad GO12 XSE / B&G Vulcan 12R and 2 inst. (Simrad IS42 / B&G Triton2/AP44 square holes) for 12? wide guardSystemPods are for mounting a Radar or Chartplotter and Instruments together at the helm. Navigation at your finger tips. Where you need it when you need it . SystemPods are the smart solution for mounting your Radar or Chartplotter and Instruments together at the helm where you can easily operate and clearly see the fine details of the screen.A SystemPod is best mounted on a Single Bend AngleGuard.Structural Rigidity — The Gen3 enhancements now include a thicker gauge acrylic capped ABS material that improves strength and provides better structural rigidity. This thicker material allows for a larger waterproof seal. The better the structural rigidity, the less flexing when tightening and more uniform pressure on the seal. The excellent UV stability of the acrylic is combined with the durability of the ABS. The acrylic cap protects the ABS from UV and its potentially damaging effects on plastic.Waterproof Seal — All SystemPods are manufactured with a double gasket system providing an excellent watertight seal. This seal provides the best protection of your Marine Electronics. SystemPods are made to withstand the harshest wet offshore boating conditions. Gen3 enhancements include a thicker external silicone gasket with improved flush fit. The internal Poran Microcell Polyurathane gasket is now 50% thicker and is not subject to compression set like many rubber compounds. This is important when you need to open the SystemPod in the future in order to service your electronics. The gasket will continue to do its job.Nickel Chrome Plated Stainless Steel — We use all 316 stainless steel hardware that is supplied with each NavPod. Large round head tamperproof screws have deeper sockets for the NavPod wrench for better holding ability when tightening than screws used on our Traditional Series NavPod. For Gen3 NavPods we provide nickel chrome-plated stainless steel tamperproof screws for security combined with a little style!Commitment to quality We stand behind our commitment by offering a 10-year warranty on all new Gen3 NavPods.Specifications Overall Height 11.88 Width 23.25 Depth 6.42 Usable Face Height 9.64 Width 20.77 Depth 5.25 Max Cutout Height 9.5 Width 20.75

    $464.28

  • NAVPOD GP2170-20 SystemPod for Simrad GO12-XSE

    Navpod NAVPOD GP2170-20 SystemPod for Simrad GO12-XSE

    NAVGP217020 SystemPodModel: GP2170-20SystemPod Pre-Cut for Simrad GO12 XSE / B&G Vulcan 12R and 2 inst. (3.6? holes) for 12? wide guardSystemPods are for mounting a Radar or Chartplotter and Instruments together at the helm. Navigation at your finger tips. Where you need it when you need it . SystemPods are the smart solution for mounting your Radar or Chartplotter and Instruments together at the helm where you can easily operate and clearly see the fine details of the screen.A SystemPod is best mounted on a Single Bend AngleGuard.Structural Rigidity — The Gen3 enhancements now include a thicker gauge acrylic capped ABS material that improves strength and provides better structural rigidity. This thicker material allows for a larger waterproof seal. The better the structural rigidity, the less flexing when tightening and more uniform pressure on the seal. The excellent UV stability of the acrylic is combined with the durability of the ABS. The acrylic cap protects the ABS from UV and its potentially damaging effects on plastic.Waterproof Seal — All SystemPods are manufactured with a double gasket system providing an excellent watertight seal. This seal provides the best protection of your Marine Electronics. SystemPods are made to withstand the harshest wet offshore boating conditions. Gen3 enhancements include a thicker external silicone gasket with improved flush fit. The internal Poran Microcell Polyurathane gasket is now 50% thicker and is not subject to compression set like many rubber compounds. This is important when you need to open the SystemPod in the future in order to service your electronics. The gasket will continue to do its job.Nickel Chrome Plated Stainless Steel — We use all 316 stainless steel hardware that is supplied with each NavPod. Large round head tamperproof screws have deeper sockets for the NavPod wrench for better holding ability when tightening than screws used on our Traditional Series NavPod. For Gen3 NavPods we provide nickel chrome-plated stainless steel tamperproof screws for security combined with a little style!Commitment to quality We stand behind our commitment by offering a 10-year warranty on all new Gen3 NavPods.Specifications Overall Height 11.88 Width 23.25 Depth 6.42 Usable Face Height 9.64 Width 20.77 Depth 5.25 Max Cutout Height 9.5 Width 20.75

    $464.28

  • NAVPOD GP2170-17 SystemPod for Simrad NSS12 evo3

    Navpod NAVPOD GP2170-17 SystemPod for Simrad NSS12 evo3

    NAVGP217017 SystemPodModel: GP2170-17SystemPod Pre-Cut for Simrad NSS12 evo3 / B&G Zeus3 12 and 2 inst. (Simrad IS42 / B&G Triton /AP44 square holes) for 12? wide guardSystemPods are for mounting a Radar or Chartplotter and Instruments together at the helm. Navigation at your finger tips. Where you need it when you need it . SystemPods are the smart solution for mounting your Radar or Chartplotter and Instruments together at the helm where you can easily operate and clearly see the fine details of the screen.A SystemPod is best mounted on a Single Bend AngleGuard.Structural Rigidity — The Gen3 enhancements now include a thicker gauge acrylic capped ABS material that improves strength and provides better structural rigidity. This thicker material allows for a larger waterproof seal. The better the structural rigidity, the less flexing when tightening and more uniform pressure on the seal. The excellent UV stability of the acrylic is combined with the durability of the ABS. The acrylic cap protects the ABS from UV and its potentially damaging effects on plastic.Waterproof Seal — All SystemPods are manufactured with a double gasket system providing an excellent watertight seal. This seal provides the best protection of your Marine Electronics. SystemPods are made to withstand the harshest wet offshore boating conditions. Gen3 enhancements include a thicker external silicone gasket with improved flush fit. The internal Poran Microcell Polyurathane gasket is now 50% thicker and is not subject to compression set like many rubber compounds. This is important when you need to open the SystemPod in the future in order to service your electronics. The gasket will continue to do its job.Nickel Chrome Plated Stainless Steel — We use all 316 stainless steel hardware that is supplied with each NavPod. Large round head tamperproof screws have deeper sockets for the NavPod wrench for better holding ability when tightening than screws used on our Traditional Series NavPod. For Gen3 NavPods we provide nickel chrome-plated stainless steel tamperproof screws for security combined with a little style!Commitment to quality We stand behind our commitment by offering a 10-year warranty on all new Gen3 NavPods.Specifications Overall Height 11.88 Width 23.25 Depth 6.42 Usable Face Height 9.64 Width 20.77 Depth 5.25 Max Cutout Height 9.5 Width 20.75

    $464.28

  • Navpod GP2170-16 SystemPod for Simrad NSS12 evo3

    $464.28

  • Navpod GP2170-15 SystemPod for Simrad NSS12 evo2

    Navpod Navpod GP2170-15 SystemPod for Simrad NSS12 evo2

    NAVGP217015 SystemPodModel: GP2170-15SystemPod Pre-Cut for Simrad NSS12 evo /B&G Zeus 12 and 2 inst. (Simrad IS42 / B&G Triton /AP44 square holes) for 12? wide guardSystemPods are for mounting a Radar or Chartplotter and Instruments together at the helm. Navigation at your finger tips. Where you need it when you need it . SystemPods are the smart solution for mounting your Radar or Chartplotter and Instruments together at the helm where you can easily operate and clearly see the fine details of the screen.A SystemPod is best mounted on a Single Bend AngleGuard.Structural Rigidity — The Gen3 enhancements now include a thicker gauge acrylic capped ABS material that improves strength and provides better structural rigidity. This thicker material allows for a larger waterproof seal. The better the structural rigidity, the less flexing when tightening and more uniform pressure on the seal. The excellent UV stability of the acrylic is combined with the durability of the ABS. The acrylic cap protects the ABS from UV and its potentially damaging effects on plastic.Waterproof Seal — All SystemPods are manufactured with a double gasket system providing an excellent watertight seal. This seal provides the best protection of your Marine Electronics. SystemPods are made to withstand the harshest wet offshore boating conditions. Gen3 enhancements include a thicker external silicone gasket with improved flush fit. The internal Poran Microcell Polyurathane gasket is now 50% thicker and is not subject to compression set like many rubber compounds. This is important when you need to open the SystemPod in the future in order to service your electronics. The gasket will continue to do its job.Nickel Chrome Plated Stainless Steel — We use all 316 stainless steel hardware that is supplied with each NavPod. Large round head tamperproof screws have deeper sockets for the NavPod wrench for better holding ability when tightening than screws used on our Traditional Series NavPod. For Gen3 NavPods we provide nickel chrome-plated stainless steel tamperproof screws for security combined with a little style!Commitment to quality We stand behind our commitment by offering a 10-year warranty on all new Gen3 NavPods.Specifications Overall Height 11.88 Width 23.25 Depth 6.42 Usable Face Height 9.64 Width 20.77 Depth 5.25 Max Cutout Height 9.5 Width 20.75

    $464.28

  • Navpod GP2170-14 SystemPod for Raymarine eS95/97/98 & AXIOM PRO 9

    Navpod Navpod GP2170-14 SystemPod for Raymarine eS95/97/98 & AXIOM PRO 9

    NAVGP217014 SystemPodModel: GP2170-14SystemPod Pre-Cut for Raymarine eS95/eS97/eS98 & AXIOM PRO 9 and 4 inst. holess (3.6? holes) for 12? wide guardSystemPods are for mounting a Radar or Chartplotter and Instruments together at the helm. Navigation at your finger tips. Where you need it when you need it . SystemPods are the smart solution for mounting your Radar or Chartplotter and Instruments together at the helm where you can easily operate and clearly see the fine details of the screen.A SystemPod is best mounted on a Single Bend AngleGuard.Structural Rigidity — The Gen3 enhancements now include a thicker gauge acrylic capped ABS material that improves strength and provides better structural rigidity. This thicker material allows for a larger waterproof seal. The better the structural rigidity, the less flexing when tightening and more uniform pressure on the seal. The excellent UV stability of the acrylic is combined with the durability of the ABS. The acrylic cap protects the ABS from UV and its potentially damaging effects on plastic.Waterproof Seal — All SystemPods are manufactured with a double gasket system providing an excellent watertight seal. This seal provides the best protection of your Marine Electronics. SystemPods are made to withstand the harshest wet offshore boating conditions. Gen3 enhancements include a thicker external silicone gasket with improved flush fit. The internal Poran Microcell Polyurathane gasket is now 50% thicker and is not subject to compression set like many rubber compounds. This is important when you need to open the SystemPod in the future in order to service your electronics. The gasket will continue to do its job.Nickel Chrome Plated Stainless Steel — We use all 316 stainless steel hardware that is supplied with each NavPod. Large round head tamperproof screws have deeper sockets for the NavPod wrench for better holding ability when tightening than screws used on our Traditional Series NavPod. For Gen3 NavPods we provide nickel chrome-plated stainless steel tamperproof screws for security combined with a little style!Commitment to quality We stand behind our commitment by offering a 10-year warranty on all new Gen3 NavPods.Specifications Overall Height 11.88 Width 23.25 Depth 6.42 Usable Face Height 9.64 Width 20.77 Depth 5.25 Max Cutout Height 9.5 Width 20.75

    $464.28

  • Navpod GP2170-12 SystemPod for Garmin 7412/7612

    Navpod Navpod GP2170-12 SystemPod for Garmin 7412/7612

    NAVGP217012 SystemPodModel: GP2170-12SystemPod Pre-Cut for Garmin GPSMAP 7412/7412xsv/7612/7612xsv and 2 inst. (3.6? holes) for 12? wide guardSystemPods are for mounting a Radar or Chartplotter and Instruments together at the helm. Navigation at your finger tips. Where you need it when you need it . SystemPods are the smart solution for mounting your Radar or Chartplotter and Instruments together at the helm where you can easily operate and clearly see the fine details of the screen.A SystemPod is best mounted on a Single Bend AngleGuard.Structural Rigidity — The Gen3 enhancements now include a thicker gauge acrylic capped ABS material that improves strength and provides better structural rigidity. This thicker material allows for a larger waterproof seal. The better the structural rigidity, the less flexing when tightening and more uniform pressure on the seal. The excellent UV stability of the acrylic is combined with the durability of the ABS. The acrylic cap protects the ABS from UV and its potentially damaging effects on plastic.Waterproof Seal — All SystemPods are manufactured with a double gasket system providing an excellent watertight seal. This seal provides the best protection of your Marine Electronics. SystemPods are made to withstand the harshest wet offshore boating conditions. Gen3 enhancements include a thicker external silicone gasket with improved flush fit. The internal Poran Microcell Polyurathane gasket is now 50% thicker and is not subject to compression set like many rubber compounds. This is important when you need to open the SystemPod in the future in order to service your electronics. The gasket will continue to do its job.Nickel Chrome Plated Stainless Steel — We use all 316 stainless steel hardware that is supplied with each NavPod. Large round head tamperproof screws have deeper sockets for the NavPod wrench for better holding ability when tightening than screws used on our Traditional Series NavPod. For Gen3 NavPods we provide nickel chrome-plated stainless steel tamperproof screws for security combined with a little style!Commitment to quality We stand behind our commitment by offering a 10-year warranty on all new Gen3 NavPods.Specifications Overall Height 11.88 Width 23.25 Depth 6.42 Usable Face Height 9.64 Width 20.77 Depth 5.25 Max Cutout Height 9.5 Width 20.75

    $464.28

  • Navpod GP2170-09 SystemPod for Raymarine a95/97/98

    Navpod Navpod GP2170-09 SystemPod for Raymarine a95/97/98

    NAVGP217009 SystemPodModel: GP2170-09SystemPod Pre-Cut for Raymarine a95/a97/a98 and four instruments for 12? wide guardSystemPods are for mounting a Radar or Chartplotter and Instruments together at the helm. Navigation at your finger tips. Where you need it when you need it . SystemPods are the smart solution for mounting your Radar or Chartplotter and Instruments together at the helm where you can easily operate and clearly see the fine details of the screen.A SystemPod is best mounted on a Single Bend AngleGuard.Structural Rigidity — The Gen3 enhancements now include a thicker gauge acrylic capped ABS material that improves strength and provides better structural rigidity. This thicker material allows for a larger waterproof seal. The better the structural rigidity, the less flexing when tightening and more uniform pressure on the seal. The excellent UV stability of the acrylic is combined with the durability of the ABS. The acrylic cap protects the ABS from UV and its potentially damaging effects on plastic.Waterproof Seal — All SystemPods are manufactured with a double gasket system providing an excellent watertight seal. This seal provides the best protection of your Marine Electronics. SystemPods are made to withstand the harshest wet offshore boating conditions. Gen3 enhancements include a thicker external silicone gasket with improved flush fit. The internal Poran Microcell Polyurathane gasket is now 50% thicker and is not subject to compression set like many rubber compounds. This is important when you need to open the SystemPod in the future in order to service your electronics. The gasket will continue to do its job.Nickel Chrome Plated Stainless Steel — We use all 316 stainless steel hardware that is supplied with each NavPod. Large round head tamperproof screws have deeper sockets for the NavPod wrench for better holding ability when tightening than screws used on our Traditional Series NavPod. For Gen3 NavPods we provide nickel chrome-plated stainless steel tamperproof screws for security combined with a little style!Commitment to quality We stand behind our commitment by offering a 10-year warranty on all new Gen3 NavPods.Specifications Overall Height 11.88 Width 23.25 Depth 6.42 Usable Face Height 9.64 Width 20.77 Depth 5.25 Max Cutout Height 9.5 Width 20.75

    $464.28

  • Navpod GP2170-07 SystemPod for Garmin GPSMAP 1020/1040

    Navpod Navpod GP2170-07 SystemPod for Garmin GPSMAP 1020/1040

    NAVGP217007 SystemPodModel: GP2170-07SystemPod Pre-Cut for Garmin GPSMAP 1242xsv/1222xsv/1222 and 2 inst. (3.6? holes) for 12? wide guardSystemPods are for mounting a Radar or Chartplotter and Instruments together at the helm. Navigation at your finger tips. Where you need it when you need it . SystemPods are the smart solution for mounting your Radar or Chartplotter and Instruments together at the helm where you can easily operate and clearly see the fine details of the screen.A SystemPod is best mounted on a Single Bend AngleGuard.Structural Rigidity — The Gen3 enhancements now include a thicker gauge acrylic capped ABS material that improves strength and provides better structural rigidity. This thicker material allows for a larger waterproof seal. The better the structural rigidity, the less flexing when tightening and more uniform pressure on the seal. The excellent UV stability of the acrylic is combined with the durability of the ABS. The acrylic cap protects the ABS from UV and its potentially damaging effects on plastic.Waterproof Seal — All SystemPods are manufactured with a double gasket system providing an excellent watertight seal. This seal provides the best protection of your Marine Electronics. SystemPods are made to withstand the harshest wet offshore boating conditions. Gen3 enhancements include a thicker external silicone gasket with improved flush fit. The internal Poran Microcell Polyurathane gasket is now 50% thicker and is not subject to compression set like many rubber compounds. This is important when you need to open the SystemPod in the future in order to service your electronics. The gasket will continue to do its job.Nickel Chrome Plated Stainless Steel — We use all 316 stainless steel hardware that is supplied with each NavPod. Large round head tamperproof screws have deeper sockets for the NavPod wrench for better holding ability when tightening than screws used on our Traditional Series NavPod. For Gen3 NavPods we provide nickel chrome-plated stainless steel tamperproof screws for security combined with a little style!Commitment to quality We stand behind our commitment by offering a 10-year warranty on all new Gen3 NavPods.Specifications Overall Height 11.88 Width 23.25 Depth 6.42 Usable Height 9.64 Width 20.77 Depth 5.25 Max Cutout Height 9.5 Width 20.75

    $464.28

  • Navpod GP2170-06 Systempod Precut Garmin 1020/1040

    Navpod Navpod GP2170-06 Systempod Precut Garmin 1020/1040

    NavPod GP2170-06 SystemPod Pre-Cut for Garmin 1020/1020xs/1040xs and two instruments (3.6" holes) for 12" wide guard NavPod GP2170 Series for 12" Guard, SystemPods for Sail are for mounting multiple pieces of electronics in one NavPod. This is a good way to reduce the height of a system. In addition to mounting a radar or chartplotter, you can have room for an autopilot, instrument, stereo controller, or VHF mic. A SystemPod is best mounted on a Single Bend AngleGuards . SystemPods for Power are for mounting on a SK135 Stachion Kit can be used to mount a SystemPod on a flat surface, such as the flybridge. Stachion Kits can also be used with a SystemPod for overhead mounting applications. H W D Overall Size 11.75" 23.25" 6.75" Usable Face 9.9" 20.5" 20" Max Cutout 9.125" 20" All SystemPods include Acrylic capped ABS plastic Chromed stainless steel tamper-poof fasteners Double seal for watertight integrity Models are available pre-cut for popular electronics. Stainless steel mounting hardware and mounting gaskets.

    $464.28

  • Navpod GP2170-04 Systempod Precut Raymarine A125/127/128

    Navpod Navpod GP2170-04 Systempod Precut Raymarine A125/127/128

    NavPod GP2170-04 SystemPod Pre-Cut for Raymarine a125/a127/a128 and two Instruments for 12" wide guard NavPod GP2170 Series for 12" Guard, SystemPods for Sail are for mounting multiple pieces of electronics in one NavPod. This is a good way to reduce the height of a system. In addition to mounting a radar or chartplotter, you can have room for an autopilot, instrument, stereo controller, or VHF mic. A SystemPod is best mounted on a Single Bend AngleGuards . SystemPods for Power are for mounting on a SK135 Stachion Kit can be used to mount a SystemPod on a flat surface, such as the flybridge. Stachion Kits can also be used with a SystemPod for overhead mounting applications. H W D Overall Size 11.75" 23.25" 6.75" Usable Face 9.9" 20.5" 20" Max Cutout 9.125" 20" All SystemPods include Acrylic capped ABS plastic Chromed stainless steel tamper-poof fasteners Double seal for watertight integrity Models are available pre-cut for popular electronics. Stainless steel mounting hardware and mounting gaskets.

    $464.28

  • Navpod GP2082 Systempod PRE-CUT Garmin 820/840

    Navpod Navpod GP2082 Systempod PRE-CUT Garmin 820/840

    NavPod GP2088 SystemPod Pre-Cut for Garmin 820/820xs/840xs and two Instruments for 12" wide guard GP2080 Series for 12" Guard, SystemPods for Sail are for mounting multiple pieces of electronics in one NavPod. This is a good way to reduce the height of a system. In addition to mounting a radar or chartplotter, you can have room for an autopilot, instrument, stereo controller, or VHF mic. A SystemPod is best mounted on a Single Bend AngleGuards . SystemPods for Power are for mounting on a SK135 Stachion Kit can be used to mount a SystemPod on a flat surface, such as the flybridge. Stachion Kits can also be used with a SystemPod for overhead mounting applications. H W D Overall Size 11.5" 19.75" 6.5" Usable Face 9.5" 17" 5.5" Max Cutout 9.375" 17" All SystemPods include Acrylic capped ABS plastic Chromed stainless steel tamper-poof fasteners Double seal for watertight integrity Models are available pre-cut for popular electronics. Stainless steel mounting hardware and mounting gaskets.

    $464.28

  • Navpod GP2082 Systempod PRE-CUT C/E 95/97

    Navpod Navpod GP2082 Systempod PRE-CUT C/E 95/97

    NavPod GP2082 SystemPod Pre-Cut for Raymarine c95 / c97 / e95 / e97 and two 3.6" holes for 12" wide guard GP2080 Series for 12" Guard, SystemPods for Sail are for mounting multiple pieces of electronics in one NavPod. This is a good way to reduce the height of a system. In addition to mounting a radar or chartplotter, you can have room for an autopilot, instrument, stereo controller, or VHF mic. A SystemPod is best mounted on a Single Bend AngleGuards . SystemPods for Power are for mounting on a SK135 Stachion Kit can be used to mount a SystemPod on a flat surface, such as the flybridge. Stachion Kits can also be used with a SystemPod for overhead mounting applications. H W D Overall Size 11.5" 19.75" 6.5" Usable Face 9.5" 17" 5.5" Max Cutout 9.375" 17" All SystemPods include Acrylic capped ABS plastic Chromed stainless steel tamper-poof fasteners Double seal for watertight integrity Models are available pre-cut for popular electronics. Stainless steel mounting hardware and mounting gaskets.

    $464.28

  • Navpod GP2080-33 SystemPod for Garmin GPSMAP 8412/8612

    Navpod Navpod GP2080-33 SystemPod for Garmin GPSMAP 8412/8612

    NAVPOD GP208033 SystemPodModel: GP2080-33SystemPod Pre-Cut for Garmin GPSMAP 8412xsv/8612xsv and 2 inst. (3.6? hole), for 12? wide guardSystemPods are for mounting a Radar or Chartplotter and Instruments together at the helm. Navigation at your finger tips. Where you need it when you need it . SystemPods are the smart solution for mounting your Radar or Chartplotter and Instruments together at the helm where you can easily operate and clearly see the fine details of the screen.A SystemPod is best mounted on a Single Bend AngleGuard.Structural Rigidity — The Gen3 enhancements now include a thicker gauge acrylic capped ABS material that improves strength and provides better structural rigidity. This thicker material allows for a larger waterproof seal. The better the structural rigidity, the less flexing when tightening and more uniform pressure on the seal. The excellent UV stability of the acrylic is combined with the durability of the ABS. The acrylic cap protects the ABS from UV and its potentially damaging effects on plastic.Waterproof Seal — All SystemPods are manufactured with a double gasket system providing an excellent watertight seal. This seal provides the best protection of your Marine Electronics. SystemPods are made to withstand the harshest wet offshore boating conditions. Gen3 enhancements include a thicker external silicone gasket with improved flush fit. The internal Poron Microcell Polyurethane gasket is now 50% thicker and is not subject to compression set like many rubber compounds. This is important when you need to open the SystemPod in the future in order to service your electronics. The gasket will continue to do its job.Nickel Chrome Plated Stainless Steel — We use all 316 stainless steel hardware that is supplied with each NavPod. Large round head tamperproof screws have deeper sockets for the NavPod wrench for better holding ability when tightening than screws used on our Traditional Series NavPod. For Gen3 NavPods we provide nickel chrome-plated stainless steel tamperproof screws for security combined with a little style!Commitment to qualitySpecifications Overall Height 11.625 Width 19.625 Depth 6.875 Usable Face Height 9.125 Width 17 Depth 5.75 Max Cutout Height 9.5 Width 17.5

    $464.28

  • Navpod GP2080-31 SystemPod for Garmin GPSMAP 8410/8610

    Navpod Navpod GP2080-31 SystemPod for Garmin GPSMAP 8410/8610

    NAVPOD GP208031 SystemPodModel: GP2080-31SystemPod Pre-Cut for Garmin GPSMAP 8410xsv/8610xsv and 2 inst. (3.6? hole), for 12? wide guardSailPods are for mounting a single Radar or Chartplotter at the helm. Navigation at your finger tips? "Where you need it, when you need it." SailPods are the smart solution for mounting your Radar or Chartplotter at the helm where you can easily operate and clearly see the fine details of the screen. NavPods have a high gloss finish, giving you a clean mounting solution while concealing unsightly wires. Nickel Chrome-Plated tamper-resistant screws provide a little bling and a lot of security. Designed with a double gasket waterproof seal, NavPods protect your electronics from the harshest of wet offshore boating conditions. A SailPod is best mounted on a Single Bend AngleGuard, or on the angled section of a Double Bend Angle Guard with an InstrumentPod mounted above it on the straight section.Structural Rigidity — The Gen3 enhancements now include a thicker gauge acrylic capped ABS material that improves strength and provides better structural rigidity. This thicker material allows for a larger waterproof seal. The better the structural rigidity, the less flexing when tightening and more uniform pressure on the seal. The excellent UV stability of the acrylic is combined with the durability of the ABS. The acrylic cap protects the ABS from UV and its potentially damaging effects on plastic.Waterproof Seal — All SailPods are manufactured with a double gasket system providing an excellent watertight seal. This seal provides the best protection of your Marine Electronics. SailPods are made to withstand the harshest wet offshore boating conditions. Gen3 enhancements include a thicker external silicone gasket with improved flush fit. The internal Poron Microcell Polyurethane gasket is now 50% thicker and is not subject to "compression set" like many rubber compounds. This is important when you need to open the SailPod in the future in order to service your electronics. The gasket will continue to do its job.Nickel Chrome-Plated Stainless Steel — We use all 316 stainless steel hardware that is supplied with each NavPod. Large round-head tamper-resistant screws have deeper sockets for the NavPod wrench for better holding ability when tightening than screws used on our Traditional Series NavPod. The Nickel Chrome-Plated Stainless Steel tamper-resistant screws provide security combined with a little style!Commitment to Quality — We stand behind our commitment by offering a 10-year warranty on all new Gen3 NavPods.Specifications Overall Height 11.625 Width 19.625 Depth 6.875 Usable Face Height 9.125 Width 17 Depth 5.75 Max Cutout Height 9.5 Width 17.5

    $464.28

  • Navpod GP2080-30 SystemPod for Furuno GP1971F 9" GPS

    Navpod Navpod GP2080-30 SystemPod for Furuno GP1971F 9" GPS

    NAVGP208030 SystemPodModel: GP2080-30SystemPod Pre-Cut for Garmin GPSMAP 1042xsv/1022xsv/1022 and 2 inst. (3.6? holes) for 12? wide guard (Requires GPSMAP 10 2 Series Flush Mount Kit Garmin Part# 010-12546-02)SystemPods are for mounting a Radar or Chartplotter and Instruments together at the helm. Navigation at your finger tips. Where you need it when you need it . SystemPods are the smart solution for mounting your Radar or Chartplotter and Instruments together at the helm where you can easily operate and clearly see the fine details of the screen.A SystemPod is best mounted on a Single Bend AngleGuard.Structural Rigidity — The Gen3 enhancements now include a thicker gauge acrylic capped ABS material that improves strength and provides better structural rigidity. This thicker material allows for a larger waterproof seal. The better the structural rigidity, the less flexing when tightening and more uniform pressure on the seal. The excellent UV stability of the acrylic is combined with the durability of the ABS. The acrylic cap protects the ABS from UV and its potentially damaging effects on plastic.Waterproof Seal — All SystemPods are manufactured with a double gasket system providing an excellent watertight seal. This seal provides the best protection of your Marine Electronics. SystemPods are made to withstand the harshest wet offshore boating conditions. Gen3 enhancements include a thicker external silicone gasket with improved flush fit. The internal Poran Microcell Polyurathane gasket is now 50% thicker and is not subject to compression set like many rubber compounds. This is important when you need to open the SystemPod in the future in order to service your electronics. The gasket will continue to do its job.Nickel Chrome Plated Stainless Steel — We use all 316 stainless steel hardware that is supplied with each NavPod. Large round head tamperproof screws have deeper sockets for the NavPod wrench for better holding ability when tightening than screws used on our Traditional Series NavPod. For Gen3 NavPods we provide nickel chrome-plated stainless steel tamperproof screws for security combined with a little style!Commitment to quality We stand behind our commitment by offering a 10-year warranty on all new Gen3 NavPods.Specifications Overall Height 11.625 Width 19.625 Depth 6.875 Usable Face Height 9.125 Width 17 Depth 5.75 Max Cutout Height 9.5 Width 17.5

    $464.28

  • Navpod GP2080-25 SystemPod for Garmin GPSMAP 1042/1022

    Navpod Navpod GP2080-25 SystemPod for Garmin GPSMAP 1042/1022

    NAVGP208025 SystemPodModel: GP2080-25SystemPod Pre-Cut for Garmin GPSMAP 1042xsv/1022xsv/1022 and 2 inst. (3.6? hole) for 12? wide guard (Requires GPSMAP 10 2 Series Flush Mount Kit Garmin Part# 010-12546-02)Specifications Overall Height 11.625 Width 19.625 Depth 6.875 Usable Face Height 9.125 Width 17 Depth 5.75 Max Cutout Height 9.5 Width 17.5

    $464.28


You have seen 240 out of 516 products

NavPod
Footer image

© 2025 REBELLION MARINE, Powered by Shopify

    Login

    Forgot your password?

    Don't have an account yet?
    Create account