Portable Bilge PumpSelf-priming, centrifugal pump.  Ideal for jon boats, utility boats, dinghies, inflatable boats, and all other small watercraft.  Also great for removing fluids from non-marine applications.Features: Powered by 3 D-cell batteries (not included) A wide strainer base adds stability Suction cup or screw mount - Includes clip to attach a hose to the transom Submersible and runs dry without damage Technical Specifications: Flow Rate - 4.17 GPM (15.79 LPM) Dimensions - 5” x 5” x 12” Hose - 3/4" x 36" WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Stainless Steel Scupper Valve Barbed - 1-1/2" Hose SizePolish your image with these beautiful, durable stainless steel fittings. Why specify plastic parts when these fittings will last the life of the boat?Rugged Stainless Construction: Cast from certified Enhanced 316 Stainless Steel alloy for strength and lifetime corrosion-resistance All visible areas are polished to a mirror finish, then passivate each part for additional protection Thick steel sidewalls withstand continual stress and hose flexing Faster, Simpler Installation: Each Scupper Valve is available with a new silicone gasket A channel under the flange holds a bead of sealant, making it easier to apply a trouble-free seal All models have wrench flats or an end notch to hold as a gripping surface; one installer can tighten all connections from inside the hull The barbed tail ends provide plenty of room to hold multiple clamps Stainless Steel Scupper Valves, Barbed: The Scupper Flap is tough neoprene rubber with a molded V that fits into the grooved body to reduce backwash Fasteners are concealed and corrosion-proof Specifications: Hose size: (inch) 1-1/2" inner diameter Thread Diameter: (inch) 1-7/8"  Flange O.D. (outside diameter): (inch) 3" Thread Length: (inch) 3-1/2" Barb Length: (inch) 1-1/2" Total Length: (inch) 5-1/2" Install Hole Saw Size: (inch) 2"  Thread NPSM: (inch) 1-1/2" Max Hull Thickness: (inch) 3" *Stainless Steel Thru-Hull Connectors are designed for installation above the water line only Specifications: Hose Size: 1-1/4" Material: Stainless Steel Box Dimensions: 3"H x 3"W x 6"L WT: 3 lbs UPC: 022697665539 Quick Guide (pdf)

Read more less

Inline Booster High Flow Electric Galley Pump - 12VThis high-performance whale pump fits inline to increase the flow rate.Features: The narrow design is ideal for dropping into the water tank  Compact, quiet, lightweight design for use with pressure switch and microswitch systems An inexpensive way to upgrade a manual water system  Also suitable for pumping diesel  Low power consumption  Specifications: Pump Type: Inline Weight: 015 kg (0.3 lbs.) Voltage: 12 VDC Recommended Fuse Size: 5 amps Cable Length: 1m (3 ft.) Hose Connection: Suitable for 10 mm (38 in.) or 13 mm (1/2 in.) flexible hose use WX1511B (stern adapter 11-15 mm) and connect WX1504 (15 mm (5/8 in.) equal straight Filter Included: No  Length: 129 mm (5-1/16 in.) Width: 36 mm (1-7/16 in.) Materials: Pump Body: ABS Seal: Nitrile Strainer: Polyurethane  Impeller: PBT Cable: PVC Performance: Discharge Head: Flow rate per minute/current draw @ 12VDC 0 m (0 ft.): 15.8 liters (4 US gallons) 3.8 amps 1 m (3 ft.): 14.8 liters (4 US gallons) 3.7 amps 3 m (10 ft.): 12.8 liters (3.5 US gallons) 3.5 amps  1 Year Warranty: CE certified ISO 88846 ISO 10133 ABYC H-23 IP67

Read more less

2000 Bilge Pump - 12 VDC, 2000 GPHHeavy duty and built to last. SHURFLOs 2000 GPH nylon bilge pump offers a unique motor cooling system to ensure efficient performance and long life. Installation is a snap with our patented swivel base and 6' tinned wire assembly.Features: 3' Tinned Wire Assembly Anti-Airlock Tough Nylon Housing Ignition Protected Water Cooled Motors - Extended Life 3 Year Warranty CE Listed This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Volts: 12v Operation: Non-Automatic Gallons Per Hour: 2000 GPH Type: Electric Box Dimensions: 6"H x 7"W x 9"L WT: 5.5 lbs UPC: 752324010127

Read more less

High Bilge Water Alarm - Surface Mount - BlackFeatures: Visual and Audible Alarm Indicator Dual signaling before maximum bilge water conditions exist, sounds an alarm & activates warning light Marine Proven Exclusively designed for the harsh marine environment Sensor has been used in bilge's for over 15 years, not effected by fuel spills or other chemicals Float Sensor Monitors bilge for high water Will not false alarm from morning dew, high humidity, splashes, hose over spray or buildup of oil or contamination Microprocessor controlled Eliminates false alarms from rough seas, chop and vibrationTest/Mute button Tests alarm with a push of a button. Mutes alarm while boater investigates the problem Easy installation Install at the helm or in the cabinCompliant with ABYC Standard H-22 Quick Guide (pdf)Owner's Manual (pdf)

Read more less

Solenoid/Anti-Syphon Valve - 12VSpecifications: Solenoid valve for use with Quiet Flush fresh water toilets inline normally closed solenoid valve Supplied with 1/2" (15mm) JG Speed fit connections, 1/2" (15mm) hose barb inlet, 3/4" (19mm) Hose barb outlet Double check valve to protect against contamination of potable water Internal inlet filter Volts: 12V DC Mountable in any orientation, above or below the toilet mounting bracket included Compatible with the Jabsco toilet series 37045, 37055, and 37075 toilets

Read more less

Flipper Manual Galley Hand Operated PumpWhale's manual galley pumps are truly design classics. Since the 1960s these manual pumps have been designed, refined and manufactured by our skilled UK based workforce.Self priming Lever operated hand pump.Features Ideal for installing between two sinks- swivelling outlet Fine flow control Easy operation - Light back & forth pump action Suitable for fresh water and saltwater 7 ltrs capacity (1.85 US gals) per minute WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Gallons Per Minute: 1.85 GPM Box Dimensions: 3"H x 7"W x 10"L WT: 0.6 lbs UPC: 766478041807

Read more less

Locking Fuel Fill Insert(0525) Black Plastic with Zinc Alloy Lock Cylinder Dual purpose key opens fill cap & locking insert Fits most PERKO vented fills Quick Guide (pdf)

Read more less

General Purpose Centrifugal PumpEnd Suction Centrifugal PumpThe Rule General Purpose Pump is designed for use as a washdown pump and/or to circulate water to your livewell tank(s). Heavy duty construction for use on commercial or pleasure boats. 1-1/2" (38mm) inlet and 1-1/2" (38mm) discharge outlet. The Rule General Purpose Pump must be mounted below the waterline. It does not deliver high pressure, nor is it self priming. It delivers lots of water but at low pressure. 12 volts DC unless noted.WARNING: This product can expose you to chemicals including FORMALDEHYDE (GAS) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov. Specifications: Gallons Per Minute: 61 GPM Volts: 12v Box Dimensions: 7"H x 9"W x 10"L WT: 6.35 lbs UPC: 042237083388 Owner's Manual (pdf)

Read more less

PRO200 Top-Down BLE Sensor for All Non-Pressurized Fluids 12V/24V Wired *Not for GasWith the Mopeka PRO200, you’ll be able to accurately measure the capacity of your non-pressurized Liquid Commodity Tanks…anywhere, anytime. The Mopeka Pro200 Sensor will attach to the top of your tank and measure tanks to depths of 30″ (Inches). The sensor can be quickly calibrated on the Mopeka Tank Check or Mopeka Co-Pilot app to measure Water, Oil, Gas, Diesel, Chemicals, and other liquid commodities and beverages. Included in the box are 3 mounting screws and 2-sided adhesive tape to secure your device.*Installation will require cutting a hole 1.25″ (32mm) in diameter in the top of the tank at the chosen location. Note: the sequence of remaining steps (electrical connections and final mounting of the sensor) should be considered now. Depending on access to the mounting location and wire routing, it may be easier to make electrical connections before the sensor is mounted, or vice versa.Features: Quickly and easily attach your Mopeka PRO200 Sensor to the top of your tank Monitor your usage directly from your mobile or tablet device, via Bluetooth, through the freely downloadable “Mopeka Tank Check” App from the Apple or Google Play App stores. 1 Year Warranty from the original date of purchase by a customer Easily select the liquid commodity you are measuring from the dropdown list in the “Tank Check” or “Co-Pilot” App Conveniently hardwired into your primary 12V power system

Read more less

Momentary Flush Switch with Stainless Steel FaceplateAllows momentary operation of the toilet by pressing a switch. Features: IP67-certified sealed front components Contact ratings - 12VDC/20 Amps, 24VDC/15 Amps 1/4" quick connect terminals Stainless steel mounting plate WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Switches Box Dimensions: 2"H x 3"W x 5"L WT: 0.3 lbs UPC: 085462041013

Read more less

PURASAN® EX Refill Tablets *1 Tub of 6 TabletsA concentrated chlorinating and brominating agent for use as bactericide and disinfectant in the PURASAN Type 1 Marine Sanitation Device.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

1000 GPH Ultima Combo Automatic Submersible Bilge Pump 12VJohnson Pump Marine Ultima Combo bilge pumps are JPM's proven Cartridge Bilge Pumps combined with the non-clogging electronic switch Ultima Switch™ for automatic operation. The electronic automatic switch Ultima Switch™ uses the patented Mirus field effect detector cells producing micro-electrical fields that detect disruptions caused by level of water present in the bilge and automatically activates and deactivates the pump.CE-ApprovedFeatures: Pre-configured with an electronic Ultima Switch for automatic operation Capacities 500 GPH, 750 GPH, 1000 GPH and 1250 GPH Extremely energy efficient Water-cooled motor for long service intervals Compact, all-in-one motor/impeller unit with stainless steel (SS2343) shaft No tools needed for maintenance, no need for complete disassembly. You can now leave the pump casing attached to both the boat and the hoses.  500 GPH, 750 GPH, and 1000 GPH pumps have easy-to-install Dura-Port discharge ports to eliminate stress cracking caused by over-tightened hose clamps 500 GPH, 750 GPH, and 1000 GPH pumps are delivered including both a straight and a 90° smooth elbow Dura-Port as well as a removable check valve Meets the international standard, ISO 8849 marine Pump body: Thermoplastic Shaft seal: Lip seal Shaft: Stainless steel Voltage: 12v Wire size: 16GA Hose size: 3/4" Includes Dura-port connection Specifications Capacity 3ft (0.9 m) head (13.6V/27.2): 50 l/min - 800 GPH Capacity straight (13.6V/27.2V): 63 l/min - 1000 GPH Amperage: 3.2 A Fuse size: 5 A Connection: 3/4" Length: 4.41" (112 mm) Width: 4.25" (108 mm) Height: 3.35" (85 mm) Weight: 14.4 oz. Specifications: Gallons Per Hour: 1000 GPH Operation: Automatic Outlet Size: 3/4" Volts: 12v Type: Electric Box Dimensions: 4"H x 7"W x 8"L WT: 1.1 lbs UPC: 729321079037 Owner's Manual (pdf)

Read more less

Proline Bilge Pump1000 GPH w/DuraPortsCapacity 3' (0.9M) head (13.6V):60 L/M - 952 GPH Capacity Straight (13.6V): 73 L/M - 1150 GPHAmperage:3AFuze Size:5AConnection:3/4"Dimensions: 5"L x 3"W x 4"H Specifications: Gallons Per Hour: 1000 GPH Operation: Automatic Volts: 12v Type: Electric Box Dimensions: 4"H x 6"W x 7"L WT: 0.9 lbs UPC: 729321221023

Read more less

Spare Motor for Cartridge - 12voltUpgrade the output of your bilge pump in a matter of a few minutes by replacing the cartridge. Cleaning debris from the impeller has never been simpler or easier. Specifications: Type: Replacement Motors Box Dimensions: 3"H x 6"W x 8"L WT: 0.6 lbs UPC: 729321285520

Read more less

Tsunami Mk2 T500 Aerator - 12V - 3/4" NPT InletKeep bait and fish alive with the Tsunami Aerator Mk2. Attwood’s leading fish-friendly technology is making it easier to install and service while offering new installation options never provided by the Tsunami range.Features: 7/8 in. x 3/4 in. seacock Flexible installation with both 90 and straight inlets and outlets Full backward compatibility with previous Tsunami models Faster, smarter installation with no sealant or tools is required Specifications:Flow Gallon/Hour: 500 Specifications: Gallons Per Hour: 500 Volts: 12v Box Dimensions: 4"H x 5"W x 8"L WT: 0.8 lbs UPC: 022697025494

Read more less

PIRANHA™ Livewell 1100 Pump - 12 VDC, 1100 GPHSmart. Reliable. Attractive. Efficient. All PIRANHA series livewell pumps have a removable cartridge for easy cleaning. Anti-airlock feature allows the pump to clear trapped air in rough water or when the boat is anchored. The dual port fitting allows for easy washdown pump connections. Everything you are looking for in a livewell pump!Features: Removable Cartridge Tough Nylon Housing Washdown Port Built-in Anti-Airlock Ignition Protected ISO 8846 2 Year Warranty CE Listed Tinned 6' Wire Assembly This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Volts: 12v Gallons Per Hour: 1100 GPH Box Dimensions: 3"H x 7"W x 9"L WT: 1.3 lbs UPC: 752324007035

Read more less

Drain Valve Lubricant - Bilingual - 24oz Features: Prevents sticky valves Restores operation Coats plumbing lines for smooth tank outflow Works in both grey and black water tanks Lubricating additive

Read more less

MF 841 Vent Cap AssemblyInstalling one of our vented loops will ensure that fluids will not siphon from tank to tank. Vented loops are commonly used in the marine toilet system and engine cooling system. The simple valve system incorporated in the top of the loop allows air to enter the line when not in use, yet effectively seals as water or other fluid passes through. Molded in Marelon, neither vent nor loop will corrode. The duckbill one way valve is designed to seal properly if particulate matter is present in fluids.  Specifications: Type: Vented Loops Box Dimensions: 1"H x 1"W x 2"L WT: 0.1 lbs UPC: 028026148735

Read more less

800 GPH Livewell Pump Angled Thru-Hull InletGood Fishing Begins with Good BaitFor over 50 years, boat builders and owners have depended on Rule pumps for a safe, fun day out on the water. Building on that legacy of marine performance, the Rule Livewell Pump Series has been designed to deliver superior performance and unsurpassed quality – making it the perfect choice for keeping bait and catch alive.To meet the needs of today’s faster watercraft, this livewell pump can withstand the pressures of high-speed water intake scoops.Easy Motor ReplacementA simple and convenient “push and twist button” motor cartridge removal system makes it easy to remove and replace the motor cartridge when fitted in hard-to-reach areas of the boat.High-Efficiency Motor and Impeller DesignThe advanced engineering of the Rule Livewell Pump Series ensures a more efficient water circulation, which is crucial for maintaining the well-being of bait/catch in the livewell.Adaptable to Different Setups and ConfigurationsAll Rule livewell pumps are supplied with threaded nylon hose barb attachments, making them adaptable to different setups and configurations and allowing for versatile hose mounting options.High Inlet Pressure Capability for High-Speed VesselsWhile other livewell pumps are not engineered to withstand the additional water pressures of boats with high-speed pickup scoops, the Rule Livewell Pump Series features a high inlet pressure capability that can keep up with the demands of more powerful boats.Features: High-efficiency pump design for optimal bait health Simple one-hand ‘twist & click’ motor cartridge removal/replacement Inlets for straight thru-hull, angled thru-hull, and seacock installations Secondary inlet port for washdown pump connection Advanced anti-airlock protection Specifications: Open Flow: 800 GPH Inlet Style: Angled Thru-Hull Inlet Size - NPT: 3/4" NPSM Thread Discharge Size - Hose Barb: 3/4" Voltage: 12VDC Amp Draw @ 12VDC: 4.1 AMP Fuse Size: 7.5 AMP Replacement Motor Cartridge PN: 66DR Quick Guide (pdf)

Read more less

Dual Fish Bait Bucket with Aerator Built-InFeatures more durable construction and adds a series of innovative lid designs to help you maintain the health of your bait.The Dual Bait Bucket includes a clip-on aerator (#14331) and a storage compartment built-in to the lid for worms or other bait separate from minnows.Features: 1.3 Gallon Capacity Insulated Liner Built-in Compartment Lid Aerator Clip-on Bracket Hose Hole in Lid Lid Housed Aerator Specifications: Width: 1" Length (Inches): 1" Height: 10" Box Dimensions: 10"H x 10"W x 10"L WT: 1.85 lbs UPC: 082271048257

Read more less

Premium Drinking Water HosesHeavy Duty reinforced 5/8" ID drinking water hoses are 20% thicker than our standard hoses. Rated for 300 PSI and NSF listed. BPA free. Anti-kink design features machined fittings and strain-relief ends for added durability. Drinking water safe.

Read more less

High Flow 1500 GPH Livewell Pump 24VDC, 4A, 1-1/8", Dual Port, SubmersibleShurflo's nylon livewell pumps offer a unique motor cooling system to ensure efficient performance and long life. Designed for large livewell applications it comes standard with 6 ft. tinned wire assembly.Features: Anti-airlock Tough nylon housing Washdown port connection (1" in, 1-1/8" out) Submersible Tinned 6' wired assembly 6-1/2"L x 3-3/4"W Ignition Protected ISO 8846 2-year warranty Specifications: Volts: 24 VDC Amps: 4A Flow Rate: 1500 GPH This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

The Raritan Programmable Smart Toilet Control:The Raritan Smart Toilet Control is a fully programmable flush control. The control allows users to flush the toilet with no water, a small amount of water or a fully timed flush. the timed flush feature can be adjusted on the panel without having to remove any components. Normal Flush - starts a timed flush, walk away and the toilet will run through a sequence of intake and discharge modes ensuring maximum bowl rinse, bowl re-fills to leave water in the bow Water Saver - starts a timed flush using half of the water of a normal flush. Bowl refills to leave water in the bowl. Water Only - adds additional water to the bowl without discharging any of the contents of the bowl. Allows the user to wet the bowl prior to use or fill the bowl to a certain level to minimize water usage. Empty Only - allows the user to evacuate the bowl while using no water. While the button is pressed the discharge pump will run, when released the pump stops. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Electric Box Dimensions: 3"H x 9"W x 9"L WT: 1.25 lbs UPC: 085462029172

Read more less

Chrome Compact Shower Control Mixer - Single LeverThis part is a compact single-lever shower mixer.Features:Flexible 3/8 in. BSP-M output line for hose connectionSpecifications: Water Connection: Flexible supply lines with 1/2 in. NPS-F fittings Material: Chrome-plated brass Mounting Hole: 1-1/4 in. Shipping Weight: 3 lbs. *The "P" within the part number indicates retail packaging

Read more less

CM30P7-1 - 12V - Circulation Pump - Dia20Features: 12V, 6.9 GPM circulation pump Compact, magnetic driven centrifugal pump High flow rate with very low electrical current consumption Suitable for fresh water, ethylene glycol and salt water

Read more less

Thirsty-Mate Hand PumpThe Beckson THIRSTY-MATE hand pump is manufactured in the U.S.A. of the finest materials available. It is self-priming and very easy to clean. This hand pump will not rust or corrode or mar your boat. If your THIRSTY-MATE hand pump becomes clogged, simply remove the foot valve assembly and clean out the inside. Spare parts such as replacement foot valve assemblies and hoses are readily available.Features: Angled top sleeve Contoured red tee handle Non-conductive material Self-priming plunger valve Special polyvinyl grey body and shaft Removable foot valve for cleaning Self-priming Solvent welded construction Will withstand temperature to 120 degrees F (49 degrees C) Length: 24" Diameter: 1-3/4" Strokes/Gal: 6 Capacity: 10GM Hose Length: 24" WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Gallons Per Hour: 600 GPH Gallons Per Minute: 10 GPM Type: Manual Box Dimensions: 2"H x 4"W x 27"L WT: 1 lbs UPC: 021083000077

Read more less

PRO+ Residential BLE - LR for 48" Tall Tanks or LessThe PRO+ Sensor combines all the best technology of our ultrasonic sensing for the best sensor performance ever, using long-range Bluetooth communications to monitor tanks from the Mopeka App.  Approximately 3x the range of a normal Bluetooth sensor, this sensor is ideal for tanks located a long distance from the house. It can also be used in conjunction with a MopekaIoT Wifi Bridge to monitor tanks when outside of Bluetooth range.*Should your tank have a horizontal seam along the bottom length of your tank, please see the Mopeka Seam Adapter for PRO+Features:  ‍LPG Tanks and Single-walled Non-Pressurized tanks: All steel LPG tanks up to 1000 gallons, horizontal or vertical cylinders; above ground only. Mounting: Mounts to the bottom by magnets. How to read level: Free Mopeka C0-Pilot APP on your smartphone or tablet. Power: 2 AAA (Energizer Ultimate Lithium only, included) Includes 1 Sonic Grease packet

Read more less

Straight Fitting Wingnut Swivel - 1/2"-14NPT(F) x 5/8"BarbCustomize a SHURFLO pump to fit your system. Fittings accommodate all SHURFLO pumps with 1/2"-14 threads Finger-friendly wingnut hex style easily threads onto port Two per package This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

500 GPH Livewell Pump Straight Thru-Hull InletGood Fishing Begins with Good BaitFor over 50 years, boat builders and owners have depended on Rule pumps for a safe, fun day out on the water. Building on that legacy of marine performance, the Rule Livewell Pump Series has been designed to deliver superior performance and unsurpassed quality – making it the perfect choice for keeping bait and catch alive.To meet the needs of today’s faster watercraft, this livewell pump can withstand the pressures of high-speed water intake scoops.Easy Motor ReplacementA simple and convenient “push and twist button” motor cartridge removal system makes it easy to remove and replace the motor cartridge when fitted in hard-to-reach areas of the boat.High-Efficiency Motor and Impeller DesignThe advanced engineering of the Rule Livewell Pump Series ensures a more efficient water circulation, which is crucial for maintaining the well-being of bait/catch in the livewell.Adaptable to Different Setups and ConfigurationsAll Rule livewell pumps are supplied with threaded nylon hose barb attachments, making them adaptable to different setups and configurations and allowing for versatile hose mounting options.High Inlet Pressure Capability for High-Speed VesselsWhile other livewell pumps are not engineered to withstand the additional water pressures of boats with high-speed pickup scoops, the Rule Livewell Pump Series features a high inlet pressure capability that can keep up with the demands of more powerful boats.Features: High-efficiency pump design for optimal bait health Simple one-hand ‘twist & click’ motor cartridge removal/replacement Inlets for straight thru-hull, angled thru-hull, and seacock installations Secondary inlet port for washdown pump connection Advanced anti-airlock protection Specifications: Open Flow: 500 GPH Inlet Style: Straight Thru-Hull Inlet Size - NPT: 3/4" NPSM Thread Discharge Size - Hose Barb: 3/4" Voltage: 12VDC Amp Draw @ 12VDC: 3.0 AMP Fuse Size: 5 AMP Replacement Motor Cartridge PN: 65DR Quick Guide (pdf)

Read more less

Joker ValveRaritan's Joker Valve toilet replacement part.Raritan manufactures equipment for pleasure boats throughout the world. Products include marine toilets, waste treatment systems, icemakers and water heaters. Committed to the environment and preserving sea life, Raritan designs products to help maintain an environmental balance and ensure the quality of marine waters.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Parts Box Dimensions: 2"H x 3"W x 5"L WT: 0.1 lbs UPC: 085462005138

Read more less

Pump Protector - 4ozEver get your pressure washer out in the spring, fire it up, and you see water leaking from the bottom of the pump with no water pressure? This is due to seals going bad because of no lubrication, or in cold climates, water in the pump during the winter freezes and causes the cast pump to crack. STA-BIL Pressure Washer Pump Protector is quick and easy to use year-round to keep everything working properly inside your pressure washer. This product is great for protecting pressure washer pumps during storage as well as keeping pistons and seals fresh during the season for easy trouble-free startups. It is simple to use and takes seconds to protect your investment. The next-generation anti-freeze and lubricant will protect your pressure washer pumps 24/7. Screw the pump protector onto the water hose inlet of the pressure washer, with the pressure washer wand disconnected. Push down on the STA-BIL Pressure Washer Pump Protector trigger and hold until you see foam come out the side the wand connects onto. Your pressure washer is now lubricated and any standing water has been pushed out.Features: Protects Pressure Washer Pumps During Storage Protects Pistons and Seals From Damage Can Safely Be Drained Next Generation Anti-Freeze and Lubricant Formula Coats and Protects Components Of Pressure Washer To Prevent Freezing Helps Prevent Harmful Buildup Of Hard Water Mineral Deposits

Read more less

360GPH Standard Bilge Pump - 12VCustomers talk about flow, they want the water out of the bilge, andfast. Improved design and performance means that our next generation 360GPH pump will produce this flow at just 12V rather than 13.6V as previously required...more typical of on board voltage supply.Our next generation of Rule pumps include check valves and to do this, we've created hidden air vent to prevent airlocking. Under each strainer tab there is a small hole that vents any air trapped in the pump housing preventing airlocks...and that's how we do it.We have true electromagnetic suppression (EMC). We have a built-in thermal cell that protects the pump and the vessel when things get too hot.We've re-engineered the inside and outside of our bilge pumps, starting with a blank slate. And we're just getting startedFeatures: Non-automatic - used with a panel switch or Rule float switch Submersible and Ignition Protected High efficiency, low amp motor Stainless-steel shaft Includes backflow preventer WARNING: This product can expose you to chemicals including 1,3-Butadiene which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Electric Gallons Per Hour: 360 GPH Operation: Non-Automatic Outlet Size: 3/4" Volts: 12v Box Dimensions: 4"H x 7"W x 7"L WT: 0.8 lbs UPC: 042237104700 Brochure (pdf)

Read more less

Mounting Collar for Pro Check Sensor Plastic Holding TankCollar set used with Pro Sensors on flat-bottom, non-magnetic tanks. Includes pre-applied adhesive and prep materials. Note: The collar for flat-bottom tanks differs from the collar for LPG Tanks. The LPG collar is angled where it attaches to the tank to match cylinder curvature, whereas this collar has a flat flange. Specifications: Type: Parts Box Dimensions: 1"H x 4"W x 4"L WT: 0.05 lbs

Read more less

Pro Series 2400 GPH Replacement Sump Pump - 12V - 2400GPH with 10' Lift, 1.5" DischargeDesigned for use around the home, this 12VDC pump will move water quickly. It is a direct replacement pump for Glentronics Battery Backup Sump Pump Systems, but can also be used for moving rainwater, draining pool covers, draining rain barrels, filling troughs, or just about any other clean-water utility pump application. The pump includes a snap-on removable strainer basket, a 1.5" threaded discharge port with a removable threaded PVC elbow, and is wired with 6' of jacketed wire with a 2-pin male Molex connector that can be cut off if preferred.Features: 2,400 GPH at 10' Head Draws 20 Amps @ 12VDC 1.5" Threaded discharge port with 1.5" 90-degree elbow included Non-corrosive ABS pump housing Fiber-filled polycarbonate impeller Stainless Steel Shaft This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Gallons Per Hour: 2400 GPH Gallons Per Minute: 40 GPM Operation: Non-Automatic Outlet Size: 1-1/2" Reversible: Optional Type: Electric Volts: 12v Box Dimensions: 6"H x 10"W x 10"L WT: 6.35 lbs

Read more less

PRO+ Residential Cellular LTE - CAT - M1 for 48" Tall Tanks or LessCheck the levels on your steel propane tanks with Mopeka's PRO+ Cellular Sensor. With an accuracy of 99.5%, you can quickly and easily monitor the levels of all your pressurized tanks (except for composite tanks) in real-time, anytime. Featuring both cellular and Bluetooth connectivity, the Mopeka's Pro + Cellular contains a SIM that is valid for 10 years and will be reactivated if still in use. No recurring costs. Designed to meet the demands of your home or commercial infrastructure, Mopeka's Pro + Cellular has a battery life of up to five years, and the battery is replaceable. This digital level can withstand the harsh elements of the outdoors, making it ideal for any tanks that are outdoors or hard to reach.The PRO+ Cellular comes with integrated temperature sensing, a tank "bubble level" indicator, configurable sample timing, firmware updates, and customizable alarms/alerts, all designed to enhance reading quality and precision. It works seamlessly with both vertical and horizontal cylinders, making it a versatile and reliable option for tank monitoring. Say goodbye to complicated setups. Our tank sensor easily attaches to the underside of your tank and can be secured in seconds.Features: ENHANCED ACCURACY – Check the levels on your propane tanks with Mopeka's PRO+ Cellular Sensor. With an accuracy of 99.5%, you can quickly and easily monitor the levels of all your pressurized tanks, except for composite tanks. We believe in accuracy above everything. LIFETIME CELLULAR ACCESS – Enjoy once daily cellular updates for the life of your sensor with no monthly charges or hidden fees. Includes free, unlimited access to the Mopeka Co-Pilot App for real-time monitoring and history review. Activated in seconds—just scan the QR code and sync. LONG-LASTING BATTERY - Designed to meet the demands of your home or commercial infrastructure, Mopeka's PRO+ Cellular has a battery life of up to five years. This digital level can withstand the harsh elements of the outdoors, making it ideal for any tanks that are outdoors or hard to reach. EFFORTLESS INSTALLATION - Say goodbye to complicated setups. Our tank sensor easily attaches to the underside of your tank and can be secured in seconds. CUTTING-EDGE TECHNOLOGY - The PRO+ Cellular comes with integrated temperature sensing, a tank "bubble level" indicator, configurable sample timing, firmware updates, and customizable alarms/alerts, all designed to enhance reading quality and precision. It works seamlessly with both vertical and horizontal cylinders, making it a versatile and reliable option for tank monitoring. Specifications: Sensor: PRO+ Commodity: Propane, Butane, and mixtures Mounting Location: Tank Bottom Tank Type: Steel & Aluminum Tank Orientation: Horizontal & Vertical Tank Size: <2000 gallons & Diameters 48” and below Operating Temperature Range: -50° TO 60°C, -55° TO 140°F Default Communications: Global SIM 4G LTECAT M1, NB-IoT, Long-range Bluetooth Battery Life: 4-6 years, replaceable Battery Type: Energizer Lithium AAA Warranty: 3 years Comes with a Lifetime Cellular Subscription Brochure (pdf)

Read more less

IL200 Plus In-Line Submersible Pump - 24V - 2.8GPMCentrifugal submersible and inline pump.Features:  Cable Length: 1(m) Connections: 1/2" (12.7mm) Hose Dimensions: 142mm long, 38mm diameter Maximum Current: 1.5(amps) Output: up to 12.7 litres/minute at up to .75bar (2.8 gallons/minute at 11psi) Suitable for diesel, fresh and salt water Quick diesel transfer with no spillage Bait tank aeration, diesel transfer, water transfer. Water Systems to 80 ºC Intermittent light duty Motor life approx 250 hours Actual Weight: 0.33 Kg  (Approx. 0.53 Kg packed) Specifications: Type: Electric Gallons Per Minute: 2.8 GPM Volts: 24v Box Dimensions: 3"H x 9"W x 13"L WT: 1 lbs UPC: 042237109873

Read more less

Spare Cap f/1313 Gas FillNon-Locking Spare Cap f/1313 Gas Fill

Read more less

Sahara MK2 S800 Bilge Pump 800 GPH - 24V - AutomaticEngineered for extended service life, these pumps feature a cool-running design and quality components, including permanent magnet motors, stainless steel shafts, and steel-reinforced seals.Features: Sahara Mk2 is the only automatic bilge pump that eliminates air-locks  Patented X-Air™ Impeller ejects trapped air in the pump and pipework. Sahara Mk2 is the easiest automatic bilge pump to install and service  External mounting feet and integrated outlet reduces time and effort. Universal mounting pattern makes replacement simple. Service pump cartridge from hard-to-reach areas using only one hand. Sahara Mk2 is the most reliable automatic bilge pump in freshwater and saltwater applications  Attwood’s SteadySwitch™ reduces cycling and extends the life of the pump. 40% better protection against water ingress and electrolysis - vs. MK1. 2X better protection against water ingress and electrolysis - than the leading competition. Universal mounting patterns make it backwards compatible with the most popular bilge pumps on the market. Specifications: Volts: 24v Type: Electric Outlet Size: 3/4" or 1" Operation: Automatic Gallons Per Hour: 800 GPH Box Dimensions: 2"H x 4"W x 8"L WT: 1.5 lbs UPC: 022697023476 Owner's Manual (pdf)Brochure (pdf)

Read more less

PIRANHA™ Ballast 1100 Pump - 12 VDC, 1100 GPHEverything you are looking for in a ballast pump. Our tough, high density nylon housing and heavy duty water cooled motor give the PIRANHA ballast pumps unparalleled reliability. Anti airlock feature allows the pump to clear trapped air. All ballast series pumps have a removable cartridge for easy cleaning and ease of replacement.Features: Flow Rate 1100 GPH Replaceable Cartridge Tough Nylon Construction Anti-Air Lock Feature Tinned 6 Feet Wire Assembly CE, Ignition Protected ISO 8846 This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Volts: 12v Gallons Per Minute: 1100 GPH Box Dimensions: 3"H x 7"W x 9"L WT: 1.2 lbs UPC: 752324011919

Read more less

Ballast King ImpellerFeatures: Replacement Impeller Fits Ballast King Jabsco is a worldwide leading manufacture of products for the leisure marine market including water system, engine cooling pumps, searchlights and marine waste systems. Jabsco also offers industrial pumps for hygienic applications, fluid transfer in chemical processing, laboratory, paint processing, plating, and construction. WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Brochure (pdf)

Read more less

Fuel System Locking Cap f/ 1-1/2" Non-Vented Fills(1324) Black Plastic with Gasket Built in Lock Cylinder Size #0 Fits PERKO Fills 1313 & 1399 Cap Outside Thread Diameter: 1-15/32" Specifications: Construction: Plastic Box Dimensions: 2"H x 3"W x 6"L WT: 0.15 lbs UPC: 085226029707 Quick Guide (pdf)

Read more less

PWSA-1251 Poly Basket Fits WSA-1250 & WSB-1250Features: Poly Basket Fits WSA-1250 & WSB-1250

Read more less

Tsunami Mk2 T500 Aerator - 12V - Straight InletKeep bait and fish alive with the Tsunami Aerator Mk2. Attwood’s leading fish-friendly technology is making it easier to install and service while offering new installation options never provided by the Tsunami range.Features: 3-1/2 in. x 3/4 in. thru-hull Flexible installation with both 90 and straight inlets and outlets Full backward compatibility with previous Tsunami models Faster, smarter installation with no sealant or tools is required Specifications:Flow Gallon/Hour: 500 Specifications: Gallons Per Hour: 500 Inlet Style: Straight Volts: 12v Box Dimensions: 4"H x 5"W x 8"L WT: 0.85 lbs UPC: 022697025470

Read more less

Pumpguard In-Line Strainer - 1/2" NPT PortHandy filter keeps tank crud out of your pressure water pump or bilge pump. Stainless mesh screen collects rust and scale, and can be cleaned in minutes. Protects the pump from valve damage. Can be installed in any position prior to the pump. Clear inspection cover lets you see if it needs cleaning.Prevents dirt from entering pump intake. Works in any position. Easy to install and clean. Has transparent housing and stainless steel mesh filtering screen. Jabsco Pumpguard in-line strainers make great filtering agent.WARNING: This product can expose you to chemicals including STYRENE which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

Read more less

Flow-Max™ Ball Scupper - ClearReplace your old worn-out flapper scupper with our new Flow-Max™ positive sealing ball scupper. A larger exit hole allows 70% more water drainage than its nearest competitor. Multiple mounting holes make retrofits quick and easy - no filling holes or re-drilling. A neutral buoyancy ball ensures the ball won't float up and break the seal. Meets all ABYC standards.The easy twist-off design makes cleaning debris a snap. Simply twist counterclockwise to remove the ball cavity, clean out and twist back on. Stainless steel security pin provided for added safety.Features: Replaces worn out flapper scuppers 70% more drainage than competitive models Twist off for easy cleaning Retrofits all hole patterns The seal is slotted to fit over 1-1/4" motor well tubes 3” Diameter x 2-1/2” H The Flow Max Scupper only comes with one screw. The screws that screw it to the boat do not come with it.  They will be different for every boat depending on the hull thickness but you will need a flat head screw.  Screw included is a #4 x 1/4" Phillips Pan Head Stainless Steel Screw.

Read more less

Replacement Strainer BaseReplacement Strainer Base f/Round Rule Pumps w/Flow Rate 1500-2000gphWARNING: This product can expose you to chemicals including FORMALDEHYDE (GAS) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov. Specifications: Type: Strainers Box Dimensions: 3"H x 6"W x 7"L WT: 0.15 lbs UPC: 042237085634

Read more less

Rule-A-Matic® Float SwitchYear after year, the Rule-A-Matic has been the switch of choice for boaters the world over. Our latest design now includes a removable base for easy cleaning and servicing, a mercury free snap switch tested to over one million cycles and marine grade blocked wire. Designed for pumps drawing up to 14 Amps. Now includes a 2 year warranty.WARNING: This product can expose you to chemicals including STYRENE which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov. Specifications: Volts: 12/24/36v Type: Switches Box Dimensions: 2"H x 5"W x 8"L WT: 0.4 lbs UPC: 042237095435 Owner's Manual (pdf)

Read more less