Anchor Lift SystemThis convenient system drops the anchor at the turn of a button and stores it in the anchor mount housing when not in use. Constructed of heavy gauge steel with durable powder coated finish and mounts on the bow or stern corners of most boats. Anchor secures within anchor mount housing. Mounts easily to bow or stern. Deploy anchor with the simple twist of a knob. Includes: Anchor Mount/Rope Guide Assembly  Anchor Rope Reel Assembly Rear Pulley, Rear Pulley Axel Other Features: Anchor deploys and lifts smoothly and securely.   Easy installation with detailed instructions. Multiple mounting solutions Anchor stows conveniently in anchor mount housing *Anchor, rope, and mounting hardware not included.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Deckboat 40-G3 Electric Anchor Winch with AutoDeployThe TRAC Outdoors Deckboat 40-G3 Electric Anchor Winch with AutoDeploy allows you to automatically raise and lower your anchor with easy-to-use buttons. AutoDeploy works by simply pressing and releasing the down button.  When the anchor reaches the bottom, the winch will shut-off, holding the boat in place.  It has a maximum anchor capacity of 40 lb. and provides simple, smooth operation with excellent holding power. This winch features a high-efficiency, 12 V, all-steel gear motor that uses less battery power than other brands. *Anchor not includedTechnical Specifications: Boat Size - Up to 26' Anchor Capacity - 40 lb Anchor Deployment - Power Down or AutoDeploy Down Rope Speed Down - 70 FPM Rope Speed Up - 65 FPM Power - 12 V Dimensions (L x W x H) - 19.5" x 9.75" x 5.75"  In the Box: Winch w/integrated anchor roller 100' of 3/16" pre-wound double braid anchor rope Sealed membrane UP/DOWN/AutoDeploy switch Marine-grade battery wire - 17' Assembly hardware and  Instruction manual *Sold as an Individual WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Vertical/Horizontal: Horizontal Chain - Diameter (Inches): N/A Rope Diameter (Inches): 3/16" Freefall: No Box Dimensions: 7"H x 10"W x 16"L WT: 13.95 lbs UPC: 666996102199 Owner's Manual (pdf)

Read more less

Foot Switch - Up - WhiteAnchor lifting switch w/safety cover to prevent accidental push-button operation.

Read more less

G-5 Twin Eye Fender 8.8" x 26.8" - Black with AdapterPolyform’s G Series boat fender has raised the bar for quality and appearance in utility fenders.  Subscribing to the philosophy that quality does not have to cost more, we include ribs for extra strength, inflation valves for larger sizes and reinforced ropeholds for long-term durability. Utility boat fenders with Polyform dependability.Features: Even wall thickness for maximum strength and durability Molded-in ribs for strength and abrasion resistance Reinforced ropeholds Designed for use by trailered boats and in permanent protected moorings Twin-eye design for vertical or horizontal use Unique Polyform valve for years of service One (1) piece design Technical Specifications: Size (diameter x length) - 8.8" x 26.8" (22.4 x 68.1cm) Eye Diameter - .75" (1.9cm) Circumference - 27.7" (70.2cm) Volume - 5.1 gallons (19.3L) Boat Size - 25' - 35' (7.6 - 10.7M) Weight - 4.45lbs In the Box: Fender Inflation Adapter  *Sold as a Kit Specifications: Color: Black Height: 26.8" Width: 8.8" Box Dimensions: 1"H x 3"W x 6"L WT: 4.6 lbs Brochure (pdf)

Read more less

UltraGard™ PVC Dock Bumper - 35" - BlackThis bumper is manufactured from the same quality material as our Dolphin Boat Fenders and offers the ultimate in cushioning of impacts from your boat. Molded-in ribs on the interior of the UltraGard ensure it is very soft, but durable and will not collapse. The back has a slight radius allowing for easy mounting on pilings as well. Specifications: Color: Black Box Dimensions: 3"H x 6"W x 36"L WT: 3.6 lbs UPC: 776113100868

Read more less

Poly Pro Anchor Line with Snap - 1/4" x 50' - YellowHollow Braid Anchor Line with Snap.Features: 100% premium multi-filament polypropylene floating rope Plated steel Spring Hook (155630) Packaged in a reusable clamshell pack (304206050YW-1) or easy to dispense spool WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Rope Diameter (Inches): 1/4" Rope Length (Feet): 50' Rope Type: Polypropylene Box Dimensions: 3"H x 6"W x 10"L WT: 0.8 lbs UPC: 035514304016

Read more less

LFX-10 Anchor - Anodized Aluminum - 10lbThe new LFX anchor has been developed to complement our existing range, offering style with practicality.  Made from high-grade anodised aluminium, the LFX anchor demonstrates exceptional anti-corrosion performance with enhanced aesthetics. The large flukes perform superbly under high loads while being extremely lightweight, making the LFX easy to handle and use.  The anchor has the additional feature of being simple to disassemble and store in a locker. Features: Made from lightweight and strong, high-grade aluminium alloy Tough, durable and corrosion-resistant anodised finish  Performs at its best in mud and sand environments  Super high holding power Adjustable fluke angle for different conditions  Easily detachable for locker storage Technical Specifications: Material - Anodized Aluminum  Weight - 10lb (4.5 kg) In the Box: Anchor Instruction manual *Sold as an Individual Specifications: Color: Aluminum Construction: Aluminum Alloy Weight (lbs): 10 Box Dimensions: 4"H x 7"W x 32"L WT: 11.1 lbs UPC: 743683181726 Quick Guide (pdf)Owner's Manual (pdf)

Read more less

Double Braided Nylon Dock Line - 5/8" x 35' - WhiteFeatures:  Double Braided Nylon Dock Lines 100% premium double braided nylon Professionally spliced soft eye at one end Yacht whipped at the bitter end and splice point WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Color: White Length (Feet): 35' Rope Diameter (Inches): 5/8" Tracer: No Rope Type: Braided Nylon Box Dimensions: 4"H x 10"W x 14"L WT: 4.1 lbs UPC: 035514303347

Read more less

5lb Mushroom AnchorThe YakGear 5-pound Mushroom Anchor is perfect for anchoring kayaks, canoes, stand-up paddleboards, and even jon boats in muddy, sandy, or weeded bottoms. The high-level holding strength provides additional security with a wide-area mushroom cap with drains in the base.Shaped like an inverted mushroom, the head becomes buried in the soft seabed and will normally sink to the point where it has displaced its own weight in the seabed material. Its one-piece cast iron construction combined with a tough vinyl coating ensures long-lasting, dependable use. The anchor is very popular for fishermen and race buoys.Features: 5 lb. inverted mushroom-shaped anchor Cast iron and vinyl coated in black 1-year warranty Specifications: Color: Black Construction: Carbon Fiber Weight (lbs): 5 Box Dimensions: 6"H x 6"W x 6"L WT: 5.15 lbs UPC: 853628005816

Read more less

Rail Mount Stainless Steel Fender Holder Dual - 7.5"The Rail Mount Dual Fender Holder is for use on 7/8" or 1" tubing. Easy to mount, these fender holders adjust to any angle of railing and can hold any style fender. Folds flat for easy storage when not in use. Constructed of corrosion resistant formed 304 stainless steel.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Fender HookThis fender hook can be used for quick and easy placement of fenders. Designed to be installed on the gunwale for use with up to 3/8" lineFeatures: The spring-loaded hook keeps the line captive against the surface Constructed of corrosion-resistant investment-cast 316 stainless steel with rubber gasket Installs with two #8 FH fasteners (not included) Specifications: Length (inch): 2-1/16"     Width (inch): 1-1/4 Depth (inch): 5/8" Line Size (inch): 1/4"-3/8"                             Fastener: #8 FH Weight: 0.24 lb. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Double Braided Nylon Dock Line - 5/8" x 50' - WhiteFeatures:  Double Braided Nylon Dock Lines 100% premium double braided nylon Professionally spliced soft eye at one end Yacht whipped at the bitter end and splice point WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Color: White Length (Feet): 50' Rope Diameter (Inches): 5/8" Tracer: No Rope Type: Braided Nylon Box Dimensions: 6"H x 6"W x 6"L WT: 7 lbs UPC: 035514303354

Read more less

Raptor Jack Plate Adapter Bracket - Port - 2" Setback - 6" Rise - BlackMounts directly to your jack plate on the port side of your boat providing 6 inches of vertical rise for Minn Kota Raptor Shallow Water Anchors.Features: Adds 6 inches of vertical rise Light weight, single-piece aluminum construction for superior strength Powder coated exterior resists corrosion in all environments and applications Includes stainless steel mounting hardware Slotted mounting holes for position adjustment 5-year warranty Brochure (pdf)

Read more less

3/4" Double Braid Dock Line - Black - 35'Double Braid Nylon has superb handling and is the perfect combination of high-grade marine nylon, special torque balanced construction and a unique stabilization process, which produces this long wearing line that resists kinking.Applications: Dock line - ≤65' (19.8 M) vessel Mooring line - ≤ 35' (10.7 M) vessel  Technical Specifications: Color - Black Material -  Double braid nylon  Rope Diameter - 3/4" (18mm) Rope Length - 35' (10.7 M) Tensile Strength - 20,500 lb *Sold as an Individual Specifications: Tracer: No Rope Type: Braided Nylon Color: Black Length (Feet): 35' Rope Diameter (Inches): 3/4" Box Dimensions: 6"H x 6"W x 16"L WT: 4.95 lbs UPC: 753963153978 Brochure (pdf)

Read more less

3.3lb Grapnel Anchor Kit with Storage BagAnchor a kayak, canoe, or small boat worry-free with the YakGear 3.3-pound (1.5kg) Grapnel Anchor Kit. This 3.3-pound (1.5 kg) galvanized steel anchor features four 6-inch tines that fold out of the way while stored for space maximization and release when ready for use. The heavy head design of the anchor creates less wait time until the anchor is fully submerged into the anchoring surface in deeper and faster-moving water. 30 feet of 3/16-inch black nylon anchor rope and a storage ditty bag are included.Features: 3.3 lb. galvanized steel Grapnel Anchor Four folding 6" tines for easy storage Locks in an open or closed position A heavy head allows for easier anchoring 30 ft. nylon diamond braid rope Storage bag included 1-year warranty Note: It is recommended to use 3 times the depth of the water as the length of rope in calm waters and 4-5 times the depth of the water as the length of rope in choppy waters or windy conditions

Read more less

Raptor Adapter Bracket 2" Spacer - Black Mounts between your jack plate or sandwich adapter and jack plate adapter bracket, for use in port or starboard applications.Features: Provides 2” of additional outboard engine clearance by spacing raptor mounting brackets from jack plate Light-weight, single-piece aluminum construction for superior strength Powder-coated exterior resists corrosion in all environments and applications Includes stainless steel mounting hardware Slotted mounting holes for position adjustment 5-year warranty

Read more less

Raptor/Talon Bluetooth Stomp SwitchThe Raptor and Talon Wireless Stomp Switch allows for hands free control of your Minn Kota shallow water anchor. Control one or two anchors independently or simultaneously. Large target, individually mountable arrow indicators conserve space. Battery removal and installation can be completed without removal of mounting hardware. Requires Talon software version 1.460 or newer, or Raptor software version 1.210 or newer. Update your software at minnkotamotors.com/software. Features: Selection and control of single or dual Shallow Water Anchors Unique design allows batteries to be changed without the need for removing mounting hardware Individually mountable switches allow for complete customization of deck layout Automatic Up/Down Includes batteries and necessary mounting hardware Waterproof Length - 3.5" Width - 3.2" Height - 1" Weight - .66 lbs Quick Guide (pdf)Owner's Manual (pdf)

Read more less

Raptor Jack Plate Adapter - Starboard - 2" Setback - 6" Rise - WhiteMounts directly to your jack plate on the starboard side of your boat providing 6 inches of vertical rise for Minn Kota Raptor Shallow Water Anchors.Features: Adds 6 inches of vertical rise Light weight, single-piece aluminum construction for superior strength Powder coated exterior resists corrosion in all environments and applications Includes stainless steel mounting hardware Slotted mounting holes for position adjustment 5-year warranty Brochure (pdf)

Read more less

Raptor Jack Plate Adapter Bracket - Port - 2" Setback - 6" Rise - WhiteMounts directly to your jack plate on the port side of your boat providing 6 inches of vertical rise for Minn Kota Raptor Shallow Water Anchors.Features: Adds 6 inches of vertical rise Light weight, single-piece aluminum construction for superior strength Powder coated exterior resists corrosion in all environments and applications Includes stainless steel mounting hardware Slotted mounting holes for position adjustment 5-year warranty Brochure (pdf)

Read more less

Raptor 10' Shallow Water Anchor with Active Anchoring - BlackRaptor keeps working to hold you more reliably than any other anchor, especially in rough conditions. It knows where you’re anchoring, what’s happening to your boat, and what to do next. It reads the bottom, senses the anchoring force and reacts automatically to keep you locked down until the moment you’re ready to change spots. Legendary Minn Kota durability and innovative anchoring technology make Raptor the only hydraulic anchor that can call itself relentless. Features: Active Anchoring: This revolutionary anchoring technology continuously monitors anchoring force and adjusts to keep you pinned to the bottom Auto Bottom Mode: On Active Anchoring enabled models, this anchoring mode automatically senses bottom composition and hardness to deliver the right amount of anchoring force every time Durable Design: A wider profile, heavy duty reinforced pivot points and extruded aluminum design will keep Raptor on the water in the harshest conditions Retraction Force: We designed Raptor with increased retraction force to ensure spike removal in all bottom types. Multiple Control Options: Control Raptor from anywhere on the boat using your choice of options: Wireless Remote, Foot Switch, i-Pilot or i-Pilot Link Remote, Mobile App or right from the Humminbird fish finder. User-Selectable Anchoring Modes: Separate anchoring modes for Rough Water (heavy wind and chop), Soft Bottom (muddy or silted bottom), standard (normal anchoring), and Auto-Bottom Mode on Active Anchoring equipped models which automatically delivers the ideal anchoring force by sensing bottom hardness Indestructible Anchoring Spike: Strong and flexible composite anchor spike backed with a lifetime guarantee Auto Up/Down: Automatically deploy or retract your Raptor with the push of a button; no need to hold the button down Saltwater-Tough Engineering: Keeps Raptor safe from the corrosive effects of saltwater Specifications: Product Weight 44 lb Anchoring Depth 10 ft Product Dimensions 15.5 in x 4.75 in x 70 in Operation Hydraulic Active Anchoring  Deployment Four-Bar Articulating Arm Auto Up/Down Wireless Remote 15' Hydraulic hoses Owner's Manual (pdf)

Read more less

Raptor 8' Shallow Water Anchor with Active Anchoring - SilverRaptor keeps working to hold you more reliably than any other anchor, especially in rough conditions. It knows where you’re anchoring, what’s happening to your boat, and what to do next. It reads the bottom, senses the anchoring force and reacts automatically to keep you locked down until the moment you’re ready to change spots. Legendary Minn Kota durability and innovative anchoring technology make Raptor the only hydraulic anchor that can call itself relentless.Features: Active Anchoring: This revolutionary anchoring technology continuously monitors anchoring force and adjusts to keep you pinned to the bottom Auto Bottom Mode: On Active Anchoring enabled models, this anchoring mode automatically senses bottom composition and hardness to deliver the right amount of anchoring force every time Durable Design: A wider profile, heavy duty reinforced pivot points and extruded aluminum design will keep Raptor on the water in the harshest conditions Retraction Force: We designed Raptor with increased retraction force to ensure spike removal in all bottom types. Multiple Control Options: Control Raptor from anywhere on the boat using your choice of options: Wireless Remote, Foot Switch, i-Pilot or i-Pilot Link Remote, Mobile App or right from the Humminbird fish finder. User-Selectable Anchoring Modes: Separate anchoring modes for Rough Water (heavy wind and chop), Soft Bottom (muddy or silted bottom), standard (normal anchoring), and Auto-Bottom Mode on Active Anchoring equipped models which automatically delivers the ideal anchoring force by sensing bottom hardness Indestructible Anchoring Spike: Strong and flexible composite anchor spike backed with a lifetime guarantee Auto Up/Down: Automatically deploy or retract your Raptor with the push of a button; no need to hold the button down Saltwater-Tough Engineering: Keeps Raptor safe from the corrosive effects of saltwater Specifications: Product Weight 38 lb Anchoring Depth 8 ft Product Dimensions 15.5 in x 4.75 in x 58 in Operation Hydraulic Active Anchoring  Deployment Four-Bar Articulating Arm Auto Up/Down Wireless Remote 15' Hydraulic hoses Owner's Manual (pdf)

Read more less

Raptor 8' Shallow Water Anchor - SilverRaptor keeps working to hold you more reliably than any other anchor, especially in rough conditions. Designed with increased retraction force, Raptor’s spike pulls free from mud, sand and rock every time. Legendary Minn Kota durability and innovative anchoring technology make Raptor the only hydraulic anchor that can call itself relentless. Features: Durable Design: A wider profile, heavy duty reinforced pivot points and extruded aluminum design will keep Raptor on the water in the harshest conditions Retraction Force: We designed Raptor with increased retraction force to ensure spike removal in all bottom conditions. Multiple Control Options: Control Raptor from anywhere on the boat using your choice of options: Wireless Remote, Foot Switch, i-Pilot or i-Pilot Link Remote, Mobile App or right from the Humminbird fish finder. User-Selectable Anchoring Modes: Separate anchoring modes for Rough Water (heavy wind and chop), Soft Bottom (muddy or silted bottom), standard (normal anchoring), and Auto-Bottom Mode on Active Anchoring equipped models which automatically delivers the ideal anchoring force by sensing bottom hardness Indestructible Anchoring Spike: Strong and flexible composite anchor spike backed with a lifetime guarantee Auto Up/Down: Automatically deploy or retract your Raptor with the push of a button; no need to hold the button down Saltwater-Tough Engineering: Keeps Raptor safe from the corrosive effects of saltwater Specifications: Product Weight 38 lb Anchoring Depth 8 ft Product Dimensions 15.5 in x 4.75 in x 58 in Operation Hydraulic Deployment Four-Bar Articulating Arm Auto Up/Down Wireless Remote 15' Hydraulic hoses Owner's Manual (pdf)

Read more less

Aluminum Anchor 8.2kg for Boats to 39'Ankerplex is an anchor with "High Holding Power" (HHP) that triples the retention capacity of traditional “Hall” or “Navy” type anchors of the same weight. Its effectiveness is on a par with the best latest-generation anchors.Choose the model for your boat: Note that this guide is a proposal based on the experience of the manufacturer, specialized publications, and field tests carried out. It does not constitute a formal declaration of the model necessary for each vessel. There may be regulations and standards in your country, requirements of classification entities or insurance companies that condition the weight and characteristics of the anchor of your boat, and that you must know and attend to. Quick Guide (pdf)

Read more less

Stainless Steel Anchor 1.5kg for Boats to 18'Ankerplex is an anchor with "High Holding Power" (HHP) that triples the retention capacity of traditional “Hall” or “Navy” type anchors of the same weight. Its effectiveness is on a par with the best latest-generation anchors.Choose the model for your boat: Note that this guide is a proposal based on the experience of the manufacturer, specialized publications, and field tests carried out. It does not constitute a formal declaration of the model necessary for each vessel. There may be regulations and standards in your country, requirements of classification entities or insurance companies that condition the weight and characteristics of the anchor of your boat, and that you must know and attend to. Quick Guide (pdf)

Read more less

AA Sensor Cable for AA150 & AA560 15M (49.2')The Maxwell AA Sensor Cable is compatible with AA150 & AA560 Rode Counters.Features:The male plugs on both ends of this cable are directly compatible with the female plugs on the console and sensor cablesDimensions: Length: 49' (15M)

Read more less

ANCHORMAX™ WindlassFeatures: Has an extremely high power to weight ratio ompact, fully sealed gearbox is driven by a vertically mounted, permanent magnet motor Intrusion below decks is minimised making the design ideal for boats from 5m (16ft) to 10m (32ft) Fitting to the boat is simplicity itself as no dismantling of the winch is required Gear housings are marine-grade alloy and the drum is stainless steel Supplied as a single direction (clockwise) unit, complete with deck switch, fastenings, template and fitting instructions Not recommended for use to haul halyards Not recommended for use to haul chain Note: Each winch is supplied as a single direction (clockwise) fully tested unit complete with fitting instructions, deck switch, templates and fastenings. STANDARD EQUIPMENTFootswitch SPECIFICATIONS Maximum Line Pull 386kg (850lb) Speed @ nominal working load 24m/min (76ft per min) (80 amps with 100kg/220lb load) Voltage 12v Power 600w Weight 8kg(17.6lb) Maximum Boat Load 10m (33ft) Max. Boat Weight 4 Tons This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Quick Guide (pdf)Brochure (pdf)

Read more less

Talon BT 12' Shallow Water Anchor - Black When you find the right fishing spot time is critical. You can’t wait to anchor, can’t wait to cast, and can’t be bothered to move until you get what you came for. That’s why we designed every inch of Talon to hold you in place effortlessly and relentlessly – every time out.  Multiple Control Options: Control Talon from anywhere on the boat using your choice of options: Control Panel, Wireless Remote, Foot Switch, i-Pilot or i-Pilot Link Remote, Mobile App or right from the Humminbird fish finder User-Selectable Anchoring Modes: Separate anchoring modes for Rough Water (heavy wind and chop), Soft Bottom (muddy or silted bottom), and standard (normal anchoring) Built-in Work Light: Illuminate the boat transom any time of day — or night. Includes two colors (white and blue) and each has three brightness intensity settings Talon Remote: Lets you control stow, deploy, anchoring modes, multiple Talon selection and work light; comes standard with one wireless remote Bluetooth Connectivity: Control Talon from your mobile device (iOS or Android) and easily update software Indestructible Anchoring Spike: Strong and flexible composite anchor spike backed with a lifetime guarantee Vertical Deployment: Keeps Talon out of the way of your fishing lines Wave Absorption: Built-in floating suspension keeps your boat anchored down even in rough water, enabling your boat to move up or down without affecting the anchor Auto Up/Down: Automatically deploy or retract your Talon with the push of a button; no need to hold the button down Pivoting Design: Talon includes a mounting bracket that allows for up and down adjustments to fit any transom, 30 degrees of pivoting and easy removal Deployment Notification Alarm: Alerts you when trying to take off while Talon is deployed Saltwater-Tough Engineering: Keeps Talon safe from the corrosive effects of saltwater Specifications: Color: Black Box Dimensions: 11"H x 15"W x 75"L WT: 63 lbs UPC: 029402046164 Owner's Manual (pdf)Brochure (pdf)

Read more less

Talon BT 15' Shallow Water Anchor - BlackWhen you find the right fishing spot time is critical. You can’t wait to anchor, can’t wait to cast, and can’t be bothered to move until you get what you came for. That’s why we designed every inch of Talon to hold you in place effortlessly and relentlessly – every time out.  Multiple Control Options: Control Talon from anywhere on the boat using your choice of options: Control Panel, Wireless Remote, Foot Switch, i-Pilot or i-Pilot Link Remote, Mobile App or right from the Humminbird fish finder User-Selectable Anchoring Modes: Separate anchoring modes for Rough Water (heavy wind and chop), Soft Bottom (muddy or silted bottom), and standard (normal anchoring) Built-in Work Light: Illuminate the boat transom any time of day — or night. Includes two colors (white and blue) and each has three brightness intensity settings Talon Remote: Lets you control stow, deploy, anchoring modes, multiple Talon selection and work light; comes standard with one wireless remote Bluetooth Connectivity: Control Talon from your mobile device (iOS or Android) and easily update software Indestructible Anchoring Spike: Strong and flexible composite anchor spike backed with a lifetime guarantee Vertical Deployment: Keeps Talon out of the way of your fishing lines Wave Absorption: Built-in floating suspension keeps your boat anchored down even in rough water, enabling your boat to move up or down without affecting the anchor Auto Up/Down: Automatically deploy or retract your Talon with the push of a button; no need to hold the button down Pivoting Design: Talon includes a mounting bracket that allows for up and down adjustments to fit any transom, 30 degrees of pivoting and easy removal Deployment Notification Alarm: Alerts you when trying to take off while Talon is deployed Saltwater-Tough Engineering: Keeps Talon safe from the corrosive effects of saltwater Specifications: Color: Black Box Dimensions: 11"H x 15"W x 75"L WT: 72.8 lbs UPC: 029402046201 Owner's Manual (pdf)Brochure (pdf)

Read more less

G-5 Twin Eye Fender 8.8" x 26.8" - GraphitePolyform’s G Series boat fender has raised the bar for quality and appearance in utility fenders.  Subscribing to the philosophy that quality does not have to cost more, we include ribs for extra strength, inflation valves for larger sizes, and reinforced rope holds for long-term durability. The G Series fender is designed to provide protection and stand-off for vessels between 10 to 40 feet in length.Features: Even wall thickness for maximum strength and durability Molded-in ribs for strength and abrasion resistance Reinforced ropeholds Designed for use by trailered boats and in permanent protected moorings Hangs vertically or horizontally  Unique Polyform valve for years of service Technical Specifications: Size (diameter x length) - 8.8" x 26.8" (22.4 x 68.1 cm) Eye Diameter - 0.75" (1.9 cm) Circumference - 27.7" (70.2 cm) Volume - 5.1 gallons (19.3 L) Boat Size - 25'- 35' (7.6 - 10.7 M) Weight - 4.4 lb *Sold as an Individual Specifications: Color: Graphite Height: 26.8" Width: 8.8" Box Dimensions: 8"H x 8"W x 22"L WT: 5 lbs UPC: 743952031998 Brochure (pdf)

Read more less

Up/Down Footswitch - Compact, WhitePart #: P104809Maxwell's compact up and down foot switches are available in black and white versions. Operates via solenoids thus allowing smaller diameter wiring. Quick Guide (pdf)Brochure (pdf)

Read more less

10' King Pin Anchor Pole - 2-Piece - WhitePanther KPP100W King Pin Anchor Pole comes as a 2 Piece and length of 10' with the color white. 2-piece poles feature a pool-cue-style stainless steel butt collar for quick breakdown and easy storage or transport. Constructed of 3/4" diameter, high-impact fiberglass. Equipped with molded foam grips and stainless steel tips to protect the pole while allowing easy bottom penetration. Rubber storage clips with mounting screws included. (8', single-piece pole also available.)Features: 2-piece poles feature a pool-cue-style stainless steel butt collar for quick breakdown Easy to store and transport Constructed of 3/4" diameter, high-impact fiberglass Equipped with molded foam grips

Read more less

A4 - 21-1/2" x 28" - Double Layer - BlackThe A-Series are double layered making them softer, more durable & reversible.Master Fender Covers are specially designed to protect the topsides and hull from fender scuff and reduce the need for expensive gel coat repairs.They are made from a premium stain resistant, non-abrasive, loop-knit acrylic fabric, which is both durable and fade resistant. They are available in a variety of colors and sizes to suit your individual requirements. Specifications: Color: Black Box Dimensions: 4"H x 9"W x 11"L WT: 1.7 lbs UPC: 817382010264

Read more less

F-7 - 15" x 41" - Double Layer - BlackThe F-Series are double layered making them softer, more durable & reversible.Master Fender Covers are specially designed to protect the topsides and hull from fender scuff and reduce the need for expensive gel coat repairs.They are made from a premium stain resistant, non-abrasive, loop-knit acrylic fabric, which is both durable and fade resistant. They are available in a variety of colors and sizes to suit your individual requirements. Specifications: Color: Black Box Dimensions: 5"H x 9"W x 11"L WT: 1.8 lbs UPC: 817382010271

Read more less

12' King Pin Anchor Pole - 2-Piece - Black Panther KPP120B King Pin Anchor Pole comes as a 2 Piece with length of 12' and the color black. 2-piece poles feature a pool-cue-style stainless steel butt collar for quick breakdown and easy storage or transport. Constructed of 3/4" diameter, high-impact fiberglass. Equipped with molded foam grips and stainless steel tips to protect the pole while allowing easy bottom penetration. Rubber storage clips with mounting screws included. (8', single-piece pole also available.)Features: 2-piece poles feature a pool-cue-style stainless steel butt collar for quick breakdown Easy to store and transport Constructed of 3/4" diameter, high-impact fiberglass Equipped with molded foam grips

Read more less

Raptor Universal Sandwich Adapter - WhiteMounts between your jack plate and transom or between the outboard and transom, for use in both port and starboard Raptor mounting applications.Features: Allows installation of jack plate brackets without a jack plate Lightweight, single-piece aluminum construction for superior strength Powder-coated exterior resists corrosion in all environments and applications Includes stainless steel mounting hardware Slotted mounting holes for position adjustment 5-year warranty

Read more less

Raptor Jack Plate Adapter Bracket - Starboard - 8" Setback - 6" Rise - BlackMounts directly to your jack plate on the starboard side of your boat providing 8 inches of setback and 6 inches of vertical rise for Minn Kota Raptor Shallow Water Anchors.Features: Adds 8 inches of setback from the transom and 6 inches of vertical rise Lightweight, single-piece aluminum construction for superior strength Powder-coated exterior resists corrosion in all environments and applications Includes stainless steel mounting hardware Slotted mounting holes for position adjustment 5-year warranty Brochure (pdf)

Read more less

Raptor Jack Plate Adapter Bracket - Starboard - 5" Setback - 4" Rise - BlackMounts directly to your jack plate on the starboard side of your boat providing 5 inches of setback and 4 inches of vertical rise for Minn Kota Raptor Shallow Water Anchors Features: Adds 5 inches of setback from the transom and 4 inches of vertical rise Lightweight, single-piece aluminum construction for superior strength Powder-coated exterior resists corrosion in all environments and applications Includes stainless steel mounting hardware Slotted mounting holes for position adjustment 5-year warranty Brochure (pdf)

Read more less

Raptor 8' Shallow Water Anchor with Active Anchoring - BlackRaptor keeps working to hold you more reliably than any other anchor, especially in rough conditions. It knows where you’re anchoring, what’s happening to your boat, and what to do next. It reads the bottom, senses the anchoring force and reacts automatically to keep you locked down until the moment you’re ready to change spots. Legendary Minn Kota durability and innovative anchoring technology make Raptor the only hydraulic anchor that can call itself relentless.Features: Active Anchoring: This revolutionary anchoring technology continuously monitors anchoring force and adjusts to keep you pinned to the bottom Auto Bottom Mode: On Active Anchoring enabled models, this anchoring mode automatically senses bottom composition and hardness to deliver the right amount of anchoring force every time Durable Design: A wider profile, heavy duty reinforced pivot points and extruded aluminum design will keep Raptor on the water in the harshest conditions Retraction Force: We designed Raptor with increased retraction force to ensure spike removal in all bottom types. Multiple Control Options: Control Raptor from anywhere on the boat using your choice of options: Wireless Remote, Foot Switch, i-Pilot or i-Pilot Link Remote, Mobile App or right from the Humminbird fish finder. User-Selectable Anchoring Modes: Separate anchoring modes for Rough Water (heavy wind and chop), Soft Bottom (muddy or silted bottom), standard (normal anchoring), and Auto-Bottom Mode on Active Anchoring equipped models which automatically delivers the ideal anchoring force by sensing bottom hardness Indestructible Anchoring Spike: Strong and flexible composite anchor spike backed with a lifetime guarantee Auto Up/Down: Automatically deploy or retract your Raptor with the push of a button; no need to hold the button down Saltwater-Tough Engineering: Keeps Raptor safe from the corrosive effects of saltwater Specifications: Product Weight 38 lb Anchoring Depth 8 ft Product Dimensions 15.5 in x 4.75 in x 58 in Operation Hydraulic Active Anchoring  Deployment Four-Bar Articulating Arm Auto Up/Down Wireless Remote 15' Hydraulic hoses Owner's Manual (pdf)

Read more less

FX-23 - StockOriginal replacement stock for the FX-23 anchor.FOR RED LOGO ANCHORS ONLY (2006 AND NEWER)*Sold as an Individual

Read more less

Talon BT 10' Shallow Water Anchor - Black When you find the right fishing spot time is critical. You can’t wait to anchor, can’t wait to cast, and can’t be bothered to move until you get what you came for. That’s why we designed every inch of Talon to hold you in place effortlessly and relentlessly – every time out.  Multiple Control Options: Control Talon from anywhere on the boat using your choice of options: Control Panel, Wireless Remote, Foot Switch, i-Pilot or i-Pilot Link Remote, Mobile App or right from the Humminbird fish finder User-Selectable Anchoring Modes: Separate anchoring modes for Rough Water (heavy wind and chop), Soft Bottom (muddy or silted bottom), and standard (normal anchoring) Built-in Work Light: Illuminate the boat transom any time of day — or night. Includes two colors (white and blue) and each has three brightness intensity settings Talon Remote: Lets you control stow, deploy, anchoring modes, multiple Talon selection and work light; comes standard with one wireless remote Bluetooth Connectivity: Control Talon from your mobile device (iOS or Android) and easily update software Indestructible Anchoring Spike: Strong and flexible composite anchor spike backed with a lifetime guarantee Vertical Deployment: Keeps Talon out of the way of your fishing lines Wave Absorption: Built-in floating suspension keeps your boat anchored down even in rough water, enabling your boat to move up or down without affecting the anchor Auto Up/Down: Automatically deploy or retract your Talon with the push of a button; no need to hold the button down Pivoting Design: Talon includes a mounting bracket that allows for up and down adjustments to fit any transom, 30 degrees of pivoting and easy removal Deployment Notification Alarm: Alerts you when trying to take off while Talon is deployed Saltwater-Tough Engineering: Keeps Talon safe from the corrosive effects of saltwater Specifications: Color: Black Box Dimensions: 11"H x 15"W x 56"L WT: 55.7 lbs UPC: 029402046102 Owner's Manual (pdf)Brochure (pdf)

Read more less

Raptor Jack Plate Adapter Bracket - Starboard - 2" Setback - 4" Rise - BlackMounts directly to your jack plate on the starboard side of your boat providing 4 inches of vertical rise for Minn Kota Raptor Shallow Water Anchors.Features: Adds 4 inches of vertical rise Light weight, single-piece aluminum construction for superior strength Powder coated exterior resists corrosion in all environments and applications Includes stainless steel mounting hardware Slotted mounting holes for position adjustment 5-year warranty Brochure (pdf)

Read more less

10' Inflatable Boat Bumper - BlackThe Seipel Marine Boat Bumper line works great to protect your boat from scratches dents and dings during boat tie-ups & lake parties. It also will protect you when pulling up to or mooring at the dock. Bumpers can be hung off the side of the boat or the side of the dock. You can leave the bumpers hanging all day so you don't have to worry whether you stopped to grab some lunch or just to pick up more friends & grab more gear to keep on wakeboarding or wake surfing!IMPORTANT – FatSac Bumpers are to be used for boat tie-ups and docks ONLY. They are NOT meant to be used for towing, to stop a boat at high speeds, or as a flotation device!Features: Highest-quality welded materials Material is similar to river raft inflatable boat UV resistant Includes 1 tie-down cleat per side. Includes 2 x 5’ rope lines to tie up the bumper Uses a Halkey Roberts inflation valve for filling and emptying All seams are double welded with seam tape for added protection and quality *Bumpers can be filled with any air pump, however we recommend FatSac Air Pumps as they work best M3150*

Read more less

Eva Corner Dock FenderAdding to Seipel Marine accessories we have launched a new permanent EVA CORNER dock fender in black. It gets mounted to the corner of your dock for easy mooring of your boat to prevent dings and scratches. Because of the EVA material, it has zero transfer onto the boat’s gel coat.Features: Black EVA molded closed-cell foam material Dimensions: L11.75” x W11.75” x H7.75” May differ slightly, this is a molded foam The only EVA permanent Corner dock fender on the market UV resistant High-density material will last long term Use the Fenders on all the corners of your dock Has 6 special proprietary molded grommets to screw to the dock Includes 6 x SS wood screws #14 x 2-1/4 If used on concrete, anchors must be purchased separately

Read more less

5' Inflatable Boat Bumper - GreyThe Seipel Marine Boat Bumper line works great to protect your boat from scratches dents and dings during boat tie-ups & lake parties. It also will protect you when pulling up to or mooring at the dock. Bumpers can be hung off the side of the boat or the side of the dock. You can leave the bumpers hanging all day so you don't have to worry whether you stopped to grab some lunch or just to pick up more friends & grab more gear to keep on wakeboarding or wake surfing!IMPORTANT – FatSac Bumpers are to be used for boat tie-ups and docks ONLY. They are NOT meant to be used for towing, to stop a boat at high speeds, or as a flotation device!Features: Highest-quality welded materials Material is similar to river raft inflatable boat UV resistant Includes 1 tie-down cleat per side. Includes 2 x 5’ rope lines to tie up the bumper Uses a Halkey Roberts inflation valve for filling and emptying All seams are double welded with seam tape for added protection and quality *Bumpers can be filled with any air pump, however we recommend FatSac Air Pumps as they work best M3150*

Read more less

5' Inflatable Boat Bumper - BlackThe Seipel Marine Boat Bumper line works great to protect your boat from scratches dents and dings during boat tie-ups & lake parties. It also will protect you when pulling up to or mooring at the dock. Bumpers can be hung off the side of the boat or the side of the dock. You can leave the bumpers hanging all day so you don't have to worry whether you stopped to grab some lunch or just to pick up more friends & grab more gear to keep on wakeboarding or wake surfing!IMPORTANT – FatSac Bumpers are to be used for boat tie-ups and docks ONLY. They are NOT meant to be used for towing, to stop a boat at high speeds, or as a flotation device!Features: Highest-quality welded materials Material is similar to river raft inflatable boat UV resistant Includes 1 tie-down cleat per side. Includes 2 x 5’ rope lines to tie up the bumper Uses a Halkey Roberts inflation valve for filling and emptying All seams are double welded with seam tape for added protection and quality *Bumpers can be filled with any air pump, however we recommend FatSac Air Pumps as they work best M3150*

Read more less

Specialty Inflatable Fender - 18" x 36" - BlackInflatable Fender 18" diameter x 36" long cylinder.Features: Made from Black 41oz Industrial Grade Material Special tie-down points RF welded (NOT glued) Custom-formed D-Rings SS 18” diameter x 36” long All made in the USA Crafted in Milwaukee All seams have extra welded PVC strips Great for Big Boats, Sail Boats, Yachts, or any boat you want to keep safe All welded seams no gluing Extra seam tape on the welds for added strength Fills with M3100 air pump or any tube pump Easy to deflate and roll up for Maximum storage Direct UV-printed logos *IMPORTANT: Not to be used for towing or to stop a boat a high speeds or as a flotation device! Specifications: Color: Black Height: 18" Width: 36" Box Dimensions: 7"H x 13"W x 17"L WT: 7.6 lbs UPC: 817177024599

Read more less

20' Inflatable Boat Bumper - BlackThe Seipel Marine Boat Bumper line works great to protect your boat from scratches dents and dings during boat tie-ups & lake parties. It also will protect you when pulling up to or mooring at the dock. Bumpers can be hung off the side of the boat or the side of the dock. You can leave the bumpers hanging all day so you don't have to worry whether you stopped to grab some lunch or just to pick up more friends & grab more gear to keep on wakeboarding or wake surfing!IMPORTANT – FatSac Bumpers are to be used for boat tie-ups and docks ONLY. They are NOT meant to be used for towing, to stop a boat at high speeds, or as a flotation device!Features: Highest-quality welded materials Material is similar to river raft inflatable boat UV resistant Includes 1 tie-down cleat per side. Includes 2 x 5’ rope lines to tie up the bumper Uses a Halkey Roberts inflation valve for filling and emptying All seams are double welded with seam tape for added protection and quality *Bumpers can be filled with any air pump, however we recommend FatSac Air Pumps as they work best M3150*

Read more less

Specialty Inflatable Fender - 12" x 30" - BlackInflatable Fender 12" diameter x 30" long cylinder.Features: Made from Black 41oz Industrial Grade Material Special tie-down points RF welded (NOT glued) Custom-formed D-Rings SS 12” diameter x 30” long All made in the USA Crafted in Milwaukee All seams have extra welded PVC strips Great for Big Boats, Sail Boats, Yachts, or any boat you want to keep safe All welded seams no gluing Extra seam tape on the welds for added strength Fills with M3100 air pump or any tube pump Easy to deflate and roll up for Maximum storage Direct UV-printed logos *IMPORTANT: Not to be used for towing or to stop a boat a high speeds or as a flotation device! Specifications: Color: Black Height: 12" Width: 30" Box Dimensions: 7"H x 13"W x 17"L WT: 5.3 lbs UPC: 817177024582

Read more less