No. 287 7/8" Round Rail MountProvides versatile mounting without having to drill more holes in your boat. Perfect for boats with limited mounting surfaces. Stainless steel fasteners (included) hold this tough mount securely in place. Works with all Scotty post mount rod holdersFits 7/8" round rails.WARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

Read more less

Extension Post f/Cannon Rod Holder - 2-PackFeatures: Extends height of rod holder by 6" Allows forward & backward pivot adjustment Alignment key allows for 360° pivot while holding post securely in place

Read more less

Non-Tipping Can Cooler 2.0 - Universal Design - NavyThe Toadfish Non-Tipping Can Cooler 2.0 has a one-size-fits-all design. Much like the regular Toadfish Non-Tipping Can Cooler, this is the first of its kind—an un-spillable beverage cooler. Innovative SmartGrip technology allows the can cooler to stick to any smooth surface. From a lack of cup holders on a rocking boat to wagging dog tails, this product will keep your drink upright, accident-free, and icy cold. To use, simply place the can cooler on any smooth surface, and it will keep the drink in place (securely up-right).Features: Universal design fits bottles and 12oz cans (normal and slim) Navy can cooler  Cup-holder compatible SmartGrip Technology - Patented SmartGrip technology makes it hard to tip but easy to lift Double-Wall Vacuum Insulation - Keeps your drinks cold until the last sip Stainless Steel - Made with high-grade stainless steel, making them puncture & rust-resistant Rubber Locking Gasket - Removable rubber gasket to securely lock in the can

Read more less

Cannon Rod HolderThe Cannon Rodholder features a three-position rod-holding configuration to deliver the fastest baitcast or spinning rod pickup. A rear-position cradle holds baitcasting reels or spinning reels. The middle baitcasting cradle conforms to longer rod butts and shrtens the amount of rod extending through the back of the holder.WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Plastic 30° Rod & Cup Holder - Open - Oval Top - BlackFeatures ABS Plastic with Oval Top 30º Rod Angle Open at Bottom Specifications: Angle: 30 Degrees Construction: Plastic Finish: Black Mounting Style: Gunwale Box Dimensions: 5"H x 5"W x 10"L WT: 0.5 lbs UPC: 857515002148 Quick Guide (pdf)

Read more less

Performance Lead Core - 27lb - 10-Color Metered - 600 ydsSufix Performance Lead Core is designed with a high-density lead center for excellent sinking speed. It consists of a 10-color sequence with 10 yards per color. Features: Excellent Sinking Speed 10-Colors: 10 yards per color High-Density Lead Dore High Tenacity Polyester Braid WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Break Strength: 27 lb. Color: Metered Length: 600 yds Series: Performance Lead Core Box Dimensions: 5"H x 5"W x 5"L WT: 3.15 lbs UPC: 024777700901

Read more less

X-Rap® Magnum® 30 BunkerThe massive diving-lip takes the X-Rap® Magnums deep… unassisted. Nothing to hinder the action. Each dives to its preset depth…the XRMag10 to 10 feet, the XRM15 to 15 feet, etc. Run up to 13 knots for big game fish worldwide. Features: Deep Diving Lip Models with Colored Lip for Extra Attraction Textured Translucent Body Internal Holographic Foil 3D Holographic Eye VMC® 4X Perma Steel® Hooks 3X Split Rings Big Water Patterns Specifications: Running Depth: 30' Body Length: 6-1/4" Weight: 2-1/2 oz Treble Hooks: Two No. 4/0 WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Series: X-Rap Magnum Size: 6.25" Box Dimensions: 2"H x 2"W x 10"L WT: 0.25 lbs UPC: 022677135823

Read more less

Stainless Steel Backing PlateSpecifically for use with all Mate Series Rod and Cup Holders.

Read more less

Swivel Base Flush Mount Rod HolderPart #: RH-5367SS Medium 0 Degree Stainless SteelWithout a doubt, our swivel base rod holder is the "Ultimate Rod Holder" for the serious sportsman. Primarily designed to be used with bent butt tackle, the rod holders unique swivel base allows the rod butt to rotate in the rod holder when side pressure is applied to the tip of the rod. This is an indispensable tool, especially important in Giant Blue Fin Tuna fishing, where reel drags in the neighborhood of 60 pounds are frequently used and can result in tremendous forces being applied to the rod holder pin. Not only does this make sheared rod holder pins a thing of the past but, more importantly, it allows the tip of the rod to follow the fish. This reduces the possibility of line fraying and enhanced drag as the line streams sideways out of the roller tip instead of over the roller. The rod is also more easily removed from the holder since it is not locked on a rigid pin. The swivel base holder functions as a standard rod holder when used with straight butt rods. Straight butt rods can be manually rotated so that the line remains on the tip's roller. The amount of torque required to rotate the swivel is set by adjusting the pressure on two nylon drag washers with a half inch stainless steel lock nut at the bottom of the rod holder. Specifications: Angle: 0 Degrees Construction: Stainless Steel Diameter (Inches): 2" Finish: Polished Length (Inches): 9" Mounting Style: Flush Box Dimensions: 5"H x 6"W x 15"L WT: 2.05 lbs UPC: 096811530720

Read more less

Outrigger Bushing KitReplace lost and worn out sleeves and bushings. Kit Contains: Enough Delrin pieces to re-bush a complete pair of Rupp outriggers

Read more less

Flush Mount Power PortOur new power port allows for quick thru-hull connection to a Cannon Downrigger Power cable. It quickly connects to the yellow female battery end plug from your downrigger, with no need to cut or splice wires. The watertight cover and gasket shield your downrigger plug from corrosion when not in use.

Read more less

Non-Tipping Can Cooler 2.0 - Universal Design - GraphiteThe Toadfish Non-Tipping Can Cooler 2.0 has a one-size-fits-all design. Much like the regular Toadfish Non-Tipping Can Cooler, this is the first of its kind—an un-spillable beverage cooler. Innovative SmartGrip technology allows the can cooler to stick to any smooth surface. From a lack of cup holders on a rocking boat to wagging dog tails, this product will keep your drink upright, accident-free, and icy cold. To use, simply place the can cooler on any smooth surface, and it will keep the drink in place (securely up-right).Features: Universal design fits bottles and 12oz cans (normal and slim) Graphite can cooler  Cup-holder compatible SmartGrip Technology - Patented SmartGrip technology makes it hard to tip but easy to lift Double-Wall Vacuum Insulation - Keeps your drinks cold until the last sip Stainless Steel - Made with high-grade stainless steel, making them puncture & rust-resistant Rubber Locking Gasket - Removable rubber gasket to securely lock in the can

Read more less

No. 1023 Tilt-up Mounting BracketIncluded with Scotty Strongarm & Longarm downriggers.For use with all Scotty tilt-up downriggers.Dimensions: 2 1/2" x 4 1/2"Bolting Dimensions: 3 3/4" x 1 5/8"Note: Does not work with 1050 or 1060WARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

Read more less

RH5931Stainless Steel Backing Plate for 0°, 15° & 30° Medium Rod Holders.

Read more less

X-Rap® Magnum® 30 Gold Green MackerelThe massive diving-lip takes the X-Rap® Magnums deep… unassisted. Nothing to hinder the action. Each dives to its preset depth…the XRMag10 to 10 feet, the XRM15 to 15 feet, etc. Run up to 13 knots for big game fish worldwide. Features: Deep Diving Lip Models with Colored Lip for Extra Attraction Textured Translucent Body Internal Holographic Foil 3D Holographic Eye VMC® 4X Perma Steel® Hooks 3X Split Rings Big Water Patterns Specifications: Running Depth: 30' Body Length: 6-1/4" Weight: 2-1/2 oz Treble Hooks: Two No. 4/0 WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Series: X-Rap Magnum Size: 6.25" Box Dimensions: 2"H x 2"W x 11"L WT: 0.25 lbs UPC: 022677135854

Read more less

Non-Tipping Can Cooler 2.0 - Universal Design - TealThe Toadfish Non-Tipping Can Cooler 2.0 has a one-size-fits-all design. Much like the regular Toadfish Non-Tipping Can Cooler, this is the first of its kind—an un-spillable beverage cooler. Innovative SmartGrip technology allows the can cooler to stick to any smooth surface. From a lack of cup holders on a rocking boat to wagging dog tails, this product will keep your drink upright, accident-free, and icy cold. To use, simply place the can cooler on any smooth surface, and it will keep the drink in place (securely up-right).Features: Universal design fits bottles and 12oz cans (normal and slim) Teal can cooler Cup-holder compatible SmartGrip Technology - Patented SmartGrip technology makes it hard to tip but easy to lift Double-Wall Vacuum Insulation - Keeps your drinks cold until the last sip Stainless Steel - Made with high-grade stainless steel, making them puncture & rust-resistant Rubber Locking Gasket - Removable rubber gasket to securely lock in the can

Read more less

Power Grip Plus1179"Stacker" with 30" leaderWARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Plastic 30° Rod & Cup Holder - Drain - Round Top - BlackFeatures ABS Plastic with Round Top 30º Rod Angle Drain at Bottom Specifications: Angle: 30 Degrees Construction: Plastic Finish: Black Box Dimensions: 5"H x 5"W x 10"L WT: 0.5 lbs UPC: 857515002360

Read more less

RH5167VVertical 0° Short TubeMedium size Short Swivel Base for Stand-Up Rods with Curved Butts. Has 2" OD x 6-1/2" long tube.Without a doubt, our swivel base rod holder is the Ultimate Rod Holder for the serious sportsman. Primarily designed to be used with bent butt tackle, the rod holders unique swivel base allows the rod butt to rotate in the rod holder when side pressure is applied to the tip of the rod. This is an indispensable tool, especially important in Giant Blue Fin Tuna fishing, where reel drags in the neighborhood of 60 pounds are frequently used and can result in tremendous forces being applied to the rod holder pin. Not only does this make sheared rod holder pins a thing of the past but, more importantly, it allows the tip of the rod to follow the fish. This reduces the possibility of line fraying and enhanced drag as the line streams sideways out of the roller tip instead of over the roller. The rod is also more easily removed from the holder since it is not locked on a rigid pin. The swivel base holder functions as a standard rod holder when used with straight butt rods. Straight butt rods can be manually rotated so that the line remains on the tips roller. The amount of torque required to rotate the swivel is set by adjusting the pressure on two nylon drag washers with a 1/2 inch stainless steel lock nut at the bottom of the rod holder. Specifications: Angle: 0 Degrees Construction: Stainless Steel Diameter (Inches): 2" Finish: Polished Length (Inches): 6-1/2" Mounting Style: Flush Box Dimensions: 4"H x 6"W x 14"L WT: 1.9 lbs UPC: 096811516526

Read more less

Non-Tipping Can Cooler 2.0 - Universal Design - SeagrassThe Toadfish Non-Tipping Can Cooler 2.0 has a one-size-fits-all design. Much like the regular Toadfish Non-Tipping Can Cooler, this is the first of its kind—an un-spillable beverage cooler. Innovative SmartGrip technology allows the can cooler to stick to any smooth surface. From a lack of cup holders on a rocking boat to wagging dog tails, this product will keep your drink upright, accident-free, and icy cold. To use, simply place the can cooler on any smooth surface, and it will keep the drink in place (securely up-right).Features: Universal design fits bottles and 12oz cans (normal and slim) Seagrass can cooler  Cup-holder compatible SmartGrip Technology - Patented SmartGrip technology makes it hard to tip but easy to lift Double-Wall Vacuum Insulation - Keeps your drinks cold until the last sip Stainless Steel - Made with high-grade stainless steel, making them puncture & rust-resistant Rubber Locking Gasket - Removable rubber gasket to securely lock in the can

Read more less

Outrigger Black Mesh Carry Bag - 72" x 12"Protects outrigger poles from damage! Nylon mesh bag resists moisture and dual pockets prevent outriggers from scratching each other.Features: Protects outrigger poles from damage Nylon mesh bag resists moisture 74" x 12" black mesh Dual pockets prevent outriggers from scratching each other This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

King Fish Rod Holder - BlackBolt-on king fish rod holder. They are designed to be mounted under the hardtops, for King Fish. It's also great for Stripper Bass and running Mojos. Black to match some hardtops. Mount with four 1/4" bolts, hardware not included. Please measure your hardtop before ordering.

Read more less

King Fish Rod Holder - WhiteBolt-on king fish rod holder. It is designed to be mounted under the hardtops, for King Fish. They are also great for Stripper Bass and running Mojos. Powder-coated white to match most hardtops. Mount with four 1/4" bolts, hardware not included. Please measure your hardtop before ordering.

Read more less

Rod Holder - Medium - 0° - Stainless SteelThe choice of boat manufacturers and consumers alike, Lee’s has been the Rod Holder Specialist for over 50 years. Lee manufacturers of over 46 different models of flush mounted rod holders. Available in two sizes, Medium (2 in O.D.) and Heavy (2 1/4 in. O.D.) three different angles (0, 15 & 30 degree) in Stainless Steel. All of our Rod Holders, are polished by hand then electropolished Lee’s has the rod holder to suit any task. Specifications: Angle: 0 Degrees Construction: Stainless Steel Diameter (Inches): 2" Finish: Polished Length (Inches): 9 " Mounting Style: Surface Box Dimensions: 1"H x 6"W x 15"L WT: 1.75 lbs UPC: 096811530027

Read more less

Clamp-On Rod Holder - Black Aluminum - Vertical Mount - Fits 1.315 O.D. PipeColor: BlackPipe Size: #2Fits: 1.315" O.D. PipeMount: VerticalJUST CLAMP THEM ON! Aluminum rod holders that are as beautiful as they are functional. With no hassle or wear and tear on your boat you can install these rod holders with only an Allen Wrench. No lengthy trips to the tower builder for custom installation at custom prices. Simply place the two halves of the clamp around the pipe, insert the bolts and tighten. Install them wherever you like. If later, you don't like the position, simply move them.These Rod Holders are the perfect solution for boats with wiring or hydraulic lines inside their tower legs. Now you can install Rod Holders on your Tower, Hard Top, T-Top, Radar Arch, Rails, Poling Platform or any structure made from standard size aluminum pipe.All Holders come lined with a heavy duty white vinyl insert. The Clamping portion of the Rod Holder is precision made for an exact fit. Four Marine Grade Stainless Bolts assure an even clamping pressure and a secure bond. The clamp is welded to the tube with either a fin or an oval rod for maximum strength. The completed Rod Holder is then meticulously polished to a mirror finish. These holders are designed primarily for storage but may be used for light tackle trolling. Specifications: Construction: Powder Coated Aluminum Diameter (Inches): 2.14" Finish: Black Length (Inches): 10" Mounting Style: Rail Box Dimensions: 4"H x 9"W x 12"L WT: 1.8 lbs UPC: 096811500235 Quick Guide (pdf)

Read more less

Vinyl Rubber InsertsClamp-On Rod Holder Rubber InsertsOutside diameter is about 1-7/8” or (1.902”) inches.Inside diameter is about 1-5/8” inches.Overall length is 7-1/2” inches

Read more less

Swivel Base Rod HolderRH577VVertical 0°Without a doubt, our swivel base rod holder is the Ultimate Rod Holder for the serious sportsman. Primarily designed to be used with bent butt tackle, the rod holders unique swivel base allows the rod butt to rotate in the rod holder when side pressure is applied to the tip of the rod. This is an indispensable tool, especially important in Giant Blue Fin Tuna fishing, where reel drags in the neighborhood of 60 pounds are frequently used and can result in tremendous forces being applied to the rod holder pin. Not only does this make sheared rod holder pins a thing of the past but, more importantly, it allows the tip of the rod to follow the fish. This reduces the possibility of line fraying and enhanced drag as the line streams sideways out of the roller tip instead of over the roller. The rod is also more easily removed from the holder since it is not locked on a rigid pin. The swivel base holder functions as a standard rod holder when used with straight butt rods. Straight butt rods can be manually rotated so that the line remains on the tips roller. The amount of torque required to rotate the swivel is set by adjusting the pressure on two nylon drag washers with a 1/2 inch stainless steel lock nut at the bottom of the rod holder. Specifications: Angle: 0 Degrees Construction: Stainless Steel Diameter (Inches): 2-1/4" Finish: Polished Length (Inches): 12" Mounting Style: Flush Box Dimensions: 4"H x 6"W x 13"L WT: 3.2 lbs UPC: 096811517707

Read more less

Flush Mount Rod HolderRH-534HS Large 15° Stainless SteelThe choice of boat manufacturers and consumers alike, Lee's has been the Rod Holder Specialist for over 50 years. Specifications: Angle: 15 Degrees Construction: Stainless Steel Diameter (Inches): 2-1/4" Finish: Polished Length (Inches): 11" Mounting Style: Flush Box Dimensions: 6"H x 6"W x 15"L WT: 2.6 lbs UPC: 096811513402

Read more less

Flush Mount Rod Holder Bar PinAll Stainless SteelRH-525SS/XS Medium 30°The choice of boat manufacturers and consumers alike, Lee's has been the Rod Holder Specialist for over 50 years. Specifications: Angle: 30 Degrees Construction: Stainless Steel Diameter (Inches): 2" Finish: Polished Length (Inches): 9" Mounting Style: Flush Box Dimensions: 5"H x 6"W x 14"L WT: 1.9 lbs UPC: 096811512511

Read more less

RH5110 degree Medium Duty Vinyl Rubber Insert for RH510, RH527V, RH5112, RH552CB, & RH552XL 

Read more less

Non-Tipping Can Cooler 2.0 - Universal Design - Light BlueThe Toadfish Non-Tipping Can Cooler 2.0 has a one-size-fits-all design. Much like the regular Toadfish Non-Tipping Can Cooler, this is the first of its kind—an un-spillable beverage cooler. Innovative SmartGrip technology allows the can cooler to stick to any smooth surface. From a lack of cup holders on a rocking boat to wagging dog tails, this product will keep your drink upright, accident-free, and icy cold. To use, simply place the can cooler on any smooth surface, and it will keep the drink in place (securely up-right).Features: Universal design fits bottles and 12oz cans (normal and slim) Light blue can cooler  Cup-holder compatible SmartGrip Technology - Patented SmartGrip technology makes it hard to tip but easy to lift Double-Wall Vacuum Insulation - Keeps your drinks cold until the last sip Stainless Steel - Made with high-grade stainless steel, making them puncture & rust-resistant Rubber Locking Gasket - Removable rubber gasket to securely lock in the can

Read more less

Outrigger Holder Reducer - 1-1/2" to 1-1/8" - PairDownsize your outrigger holdersReduce from 1-1/2" to 1-1/8"

Read more less

1-1/4" Polished SS Adjustable Clamp-On Rod Holder Choose the angle you need while providing the versatility of mounting either horizontally or vertically Clamp-on rod holders are sized IPS pipe Includes a heavy white vinyl liner Rod holder ID 1-5/8" Quick Guide (pdf)

Read more less

StowAll Deluxe XLThe ultimate stow-anything bag. Constructed out of a very durable material that has excellent abrasion and scratch resistance, this bag works in a wide range of temperatures and is resistant to most oils and grease. The clear material provides excellent transparency for viewing contents, and the waterproof closure ensures items stay dry. Ideal for storing everything from tackle to cell phones, Plano Stowall™ bags fit perfectly into storage bins or tackle systems.Features: Keep your small tackle and personal belongings dry with these simple, yet durable waterproof bags. Made from tough and impermeable thermoplastic polyurethane (TPU), they fit seamlessly into tackle systems and storage. Waterproof zip-seal closure keeps contents dry and well-protected against the elements. Gusseted bottom for additional capacity and tear resistance, and upright storage when sufficiently weighted. Soft material works in a wide range of temperatures and has resistance to oils, dirt, and grease. EZ Label tabs for quick product identification using a permanent marker or pen. Dimensions: 14”L x 15” H

Read more less

Magnum Bait Station 30Built on the proven Bait Station® design, the Frabill Magnum Bait Station 30 was designed for anglers who fish more and fish bigger. Able to aerate up to 30 gallons, it’s a great way to keep large baits like Mullet, Suckers, and Bunker safe and active. Features: 30-quart capacity Bait-friendly rounded internal corners and center divider Heavy-duty Bait Type: Multiple Power Source Multiple Options:  2 - D Batteries 12V Adapter 110V Adapter Port (110V Adapter Not Included)

Read more less

Side Mount Rod Holder - 9" - Black Side Mount Rod Holders are constructed of injection molded polypropylene with 304 stainless steel mounting brackets. Accommodates rods up to 1-3/4” in diameter. Installs with four #8 RH fasteners (not included). WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Angle: 0 Degrees Construction: Plastic Diameter (Inches): 1-3/4" Finish: Black Length (Inches): 9" Mounting Style: Surface Box Dimensions: 5"H x 6"W x 13"L WT: 0.35 lbs UPC: 035514325080

Read more less

Cricket Cage BucketUse crickets with greater ease less loss. The wide open top is designed for easier access. Cricket loading is simple with Frabill's sliding bottom access lid.Features: Tough long lasting galvanized metal/polystyrene construction Built-in carrying handle Specifications: Width: 6" Length (Inches): 6" Height: 6" Box Dimensions: 7"H x 7"W x 7"L WT: 0.35 lbs UPC: 082271112804

Read more less

Double-Cover Lockjaw™ OrganizerThe Double-Cover Lockjaw Organizer is a great way to store small parts and tools. It contains 15-54 adjustable compartments with a bulk storage compartment for larger items. The double cover design allows for easy, independent access to either compartment. Clear covers also allow for easy identification of stored items. Add in the unique lockjaw latches and molded handle, and you have a secure and portable organizer perfect for any job.Features: 15-54 adjustable compartments Bulk storage compartment Clear double covers allow easy identification Secure lockjaw latches Great for organizing small parts Easy Transport Dimensions: 14.5”L x 11.75”W x 3.38”H

Read more less