Plug-In Locking Air-Ride Post - 14-1/4" to 21"Features: Pedestals Can Be Locked In Position To Prevent Rotating Or Unlocked To Rotate Freely Provides Safe, Stable Seating Fits Any 2-3/8″ Plug-In™ Base (sold separately) Rated ABYC Class H-31 B (Fishing Only)  WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Folding Seat HingeUse to build a folding seatLength:2"Width:3-3/16"Depth:1-1/4"Fastener:#10(4)Material: 304 Stainless Steel Specifications: Material: Stainless Steel Color: Stainless Box Dimensions: 1"H x 1"W x 1"L WT: 1 lbs

Read more less

Locking Fuel Fill Insert(0525) Black Plastic with Zinc Alloy Lock Cylinder Dual purpose key opens fill cap & locking insert Fits most PERKO vented fills Quick Guide (pdf)

Read more less

Two-Bottle Rack Holds two 750ml wine bottles or two standard size water bottles 8-3/8"L x 5-1/2"H x 3-3/4"D Bulkhead mount

Read more less

Wall-Mount Paper Towel Holder Takes standard or jumbo roll Spring-loaded bar 1-7/8"H x 12-1/4"W x 4-3/8"D

Read more less

Size 10 Low Profile Deck HatchThe Low Profile Hatch has soft styling and sleek looks, ideal for use on a powerboat. Smaller ventilation hatches are suitable for any deck location on sailboats, while the larger sizes can be used as foredeck hatches on smaller to mid-size yachts.Features: Outside handles allow the hatch to be opened from on deck if it is not locked (Sizes 00, 03,10, 20 & 41 have no outside handle and can only be opened from the inside.) Low profile hatches open up to 180° (round hatches open to 170°) Friction levers hold the lid open in any position up to 95° Anodized aluminum frame for corrosion resistance Curved upper frame profile for strength as well as modern styling Technical Specifications: Support System - Self-supporting Color - Smoke Grey Weight - 4.9lbs Dimensions (L x W x H) - 13" x 13" x 1" Cut-Out Dimensions (L x W) - 10.25" x 10.25" *Sold as an Individual  Quick Guide (pdf)Owner's Manual (pdf)

Read more less

Transom Door Latch Handle - Catch Plate IncludedIdeal for one handed operation of Transom Doors. 316 SS Hand Buffed and Electro-Polished. Includes Handle and Catch Plate.Specifications:  Weight 2.8 lbs (1.27kg) Length 9-5/8" (244mm) Height 2-3/4" (70mm)   Base Plate 4-1/2" (114mm) x 3-1/2" (89mm) Uses (4) 1/4" Flat Head Fasteners

Read more less

Hollow Back 304 Stainless Steel Rub Rail Insert 3/4" x 6'Sold in 6' increments. Features: Sold in 6' Stainless Steel Type-304/316L Drilled and countersunk for #8 screws on 6-inch centers 5-year limited warranty This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

Spare Cap f/1313 Gas FillNon-Locking Spare Cap f/1313 Gas Fill

Read more less

Four Drink/Binocular Rack - TeakFeatures: 14-1/4"L x 4"W x 3-1/2"H Holds 4 cans or bottles, or 2 drinks and one pair of binoculars

Read more less

Stainless Steel Flip Top Deck Fill - Gas - 2" Hose Flip Top Hose Gas Fill is constructed of investment cast 316 stainless steel. Installs with four #10 FH fasteners (not included). USCG regulations require bonding wire to prevent sparking. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Stainless Steel Round Louvered Vent - 5" Round Louvered Vents allow air in while keeping water out. Installs with four #6 FH fasteners (not included). Corrosion resistant stamped 304 stainless steel construction. Vent area 5” 2.02 in2.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Roller Catch - Surface Mount Constructed of sturdy injection molded nylon. These catches feature stainless steel springs and provide secure closure for cabinet doors. Installs with four #8 RH fasteners (not included).WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Fuel System Locking Cap f/ 1-1/2" Non-Vented Fills(1324) Black Plastic with Gasket Built in Lock Cylinder Size #0 Fits PERKO Fills 1313 & 1399 Cap Outside Thread Diameter: 1-15/32" Specifications: Construction: Plastic Box Dimensions: 2"H x 3"W x 6"L WT: 0.15 lbs UPC: 085226029707 Quick Guide (pdf)

Read more less

Open Base Cleat(1188)Chrome Plated Zinc AlloyLength Overall: 8"Dimensions Base: 4" x 2-1/8"Max Rope Size: 5/8" Specifications: Finish: Chrome Construction: Zinc Size: 8" Box Dimensions: 2"H x 4"W x 8"L WT: 0.55 lbs UPC: 085226013379

Read more less

Toilet Tissue Rack Spring-loaded bar 1-7/8"H x 5-1/2"W x 3-3/4"D

Read more less

Pop-Out Knob Latch Plastic Chrome Plated Fixed Grip Threaded Body .05-.75Features: Material: Plastic Material: Grade ABS Finish: Chrome Plated Access Restriction: No Restrictriction Grip Type: Fixed Installation: Threaded Body and Nut Panel Thickness: 1.200-19,000 mm (0.05-0.75 Profile: Low Profile Southco offers modifications to our standard products, explore the possibilities of how Southco can engineer a solution to meet your specific application requirements.

Read more less

Solid Teak Handrails Two-Loop Handrail 23"L x 2-3/8"H x 1"D

Read more less

T-Handle Latch - Chrome Plated Zamac/Black Nylon - Locking - Freshwater OnlyFeatures: Nylon Body and CP Zamac handle Locking T-Handle latch Short Offset Cam Bar Nylon body is Black Neoprene O-ring & Key fastener included Surface Depth - 1/8"-3/4" Diameter - 3" Cut-Out - 2-1/2" Chrome Plated Zamac parts should be installed on fresh water boats only

Read more less

Fender HookThis fender hook can be used for quick and easy placement of fenders. Designed to be installed on the gunwale for use with up to 3/8" lineFeatures: The spring-loaded hook keeps the line captive against the surface Constructed of corrosion-resistant investment-cast 316 stainless steel with rubber gasket Installs with two #8 FH fasteners (not included) Specifications: Length (inch): 2-1/16"     Width (inch): 1-1/4 Depth (inch): 5/8" Line Size (inch): 1/4"-3/8"                             Fastener: #8 FH Weight: 0.24 lb. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Grabber Catch Latch - Side Mount - Black - Pull-Up Force 13N (3lbf)Features: Spring-loaded over-center latching One assembly includes catch and keeper Material and Finish: PC/ABS, black Performance Details: Operating temperature range: -30ºC (-20ºF) to 60ºC (140ºF) Flammability rating: UL94-HB Installation Notes: Orient keeper to latch. The arrow on the keeper should point towards the cam. Mount to door and adjust for smooth latching. Minimum distance from frame (or surface on which catch subassembly is mounted) to centerline of door hinge is 150 (5.9)

Read more less

Stand-Up Paper Towel Holder 13-1/2"H x 5-7/8" diameter Fits standard or jumbo roll Oiled finish

Read more less

Flush Pull Latch - Pull To Open - Non-Locking Black PlasticSpecifications: Material: Plastic Material Grade: PC / PBT Blend Finish: Natural Color/Appearance: Black Access Restriction: No Restriction Grip Range: 25.000-26.000 mm (0.98-1.02 in) Panel Thickness: 12.000-17.000 mm (0.47-0.67 in) Profile: Low Profile Size Series: Medium Size Southco offers modifications to our standard products, explore the possibilities of how Southco can engineer a solution to meet your specific application requirements.

Read more less

7-1/2" Gas Spring - 40lb - Black NitrateFeatures: Black Nitride Gas Spring Ext. Length - 7-1/2" Comp. Length - 5-1/2" Rod Dia. - 6mm Tube Dia. - 15mm P1 Force - 40 Specifications: Length: 7-1/2" Lift Capacity: 40 lbs Box Dimensions: 1"H x 3"W x 9"L WT: 0.2 lbs UPC: 725060314019

Read more less

17" Gas Spring - 60lb - Stainless SteelFeatures: 316 S.S. Gas Spring Ext. Length - 17" Comp. Length - 10-1/4" Rod Diameter - 6mm Tube Diameter - 15mm P1 Force - 60 Specifications: Length: 17" Lift Capacity: 60 lbs Box Dimensions: 1"H x 1"W x 21"L WT: 0.45 lbs UPC: 725060366032

Read more less

15" Gas Spring - 40lb - Stainless SteelFeatures: 316 S.S. Gas Spring Ext. Length - 15" Comp. Length - 9-1/2" Rod Dia. - 6mm Tube Dia. - 15mm P1 Force - 40 Specifications: Length: 15" Lift Capacity: 40 lbs Box Dimensions: 1"H x 3"W x 19"L WT: 0.5 lbs UPC: 725060334079

Read more less

Teak Plugs3/8" Plug20 Pack

Read more less

Navigation Rack5"H x 16-3/4"W x 3-1/2"D

Read more less

Teak Louvered InsertHeight:7-1/2"Width:9-1/8"Depth:3/4"Cut OutHeight:6-1/2"Width:8-1/2"Measurements for the inserts, door, and drawer/door fronts are from outside edge to outside edge.All items have a 1/2" rabbet and use a cutout size one inch less than the listed dimension

Read more less

Screw-Out Deck PlateThe Beckson Screw-Out Plate was designed to provide access without the use of tools, with a single start non-jamming (no cross-thread), extra strong, self-cleaning buttress thread. They incorporate a self-aligning center and an innovative gasket to assure a watertight seal. A back-up sealing wall leaves the plate watertight, even if the gasket is removed. Deck plates are used for access to shut-off valves or back-fastenings, inspection, and clean out for tanks and compartments. A screw-out plate should be used in compartments where a change in air pressure due to temperature or oil canning can occur. Center: Non-Skid Color: Black

Read more less

Screw-Out Deck PlateThe Beckson Screw-Out Plate was designed to provide access without the use of tools, with a single start non-jamming (no cross-thread), extra strong, self-cleaning buttress thread. They incorporate a self-aligning center and an innovative gasket to assure a watertight seal. A back-up sealing wall leaves the plate watertight, even if the gasket is removed. Our clear center plates permit observation of controls or gauges and visual inspection without the necessity of removing the center. Deck plates are used for access to shut-off valves or back-fastenings, inspection, and clean out for tanks and compartments. A screw-out plate should be used in compartments where a change in air pressure due to temperature or oil canning can occur. Center: Clear Color: White

Read more less

Screw-Out Deck PlateThe Beckson Screw-Out Plate was designed to provide access without the use of tools, with a single start non-jamming (no cross-thread), extra strong, self-cleaning buttress thread. They incorporate a self-aligning center and an innovative gasket to assure a watertight seal. A back-up sealing wall leaves the plate watertight, even if the gasket is removed. Our clear center plates permit observation of controls or gauges and visual inspection without the necessity of removing the center. Deck plates are used for access to shut-off valves or back-fastenings, inspection, and clean out for tanks and compartments. A screw-out plate should be used in compartments where a change in air pressure due to temperature or oil canning can occur. Center: Clear Color: Black

Read more less

Mortise Lock Set with BoltFeatures: Chrome Plated Zinc Alloy Locks by Turn Bottom from Inside or Key from Outside Bevel Can be Reversed During Installation Specifications: Door Thickness: 1" - 1-3/8" Escutcheon Dimensions: 4-3/8" x 1-1/4" Screw Size: 6

Read more less

Cowl Ventilator(0870) Chrome Plated Zinc Alloy Cowl with Black PERKO-KOTE Base 3" Duct Thread into Neck, Hose Clamps Not Required Cowl Opening Square: 7-1/3"

Read more less

90° P-Trap Fuel Tank Vent - Black with Stainless Steel Trim CoverComposite 90-degree P-trap fuel tank vent 66419-3. These vents help prevent water from entering the fuel tank, yet allow air to vent freely, during normal sea conditions and washdowns.  This eliminates the need for an anti-siphon loop in the vent hose.  Features: For 5/8" I.D. hose (inch) 3/4" install. hole size (inch) 9/16" max. hull thickness Vents air from your boat's fuel tank as you fill the fuel tank Splash-resistant, corrosion resistant Meets ABYC standard *Compatible with Ethanol blended fuels Quick Guide (pdf)

Read more less

T-Handle Latch - Chrome Plated Zamac/Black Nylon - No Lock - Freshwater Use OnlyFeatures: Nylon Body and CP Zamac handle non-locking T-Handle latch Short Offset Cam Bar Nylon body is Black Neoprene O-ring Shaft is 1-3/8" long Chrome Plated Zamac parts should be installed on fresh water boats only

Read more less

$100 Back from TACO Marine w/Qualifying Rub Rail Kit Purchases UNTIL 04/30/2026 VIEWExcellent universal rub rail kit. Durable Semi-Rigid rub rail with flexible chrome insert. Flex chrome insert offers the elegant look of stainless steel at a fraction of the cost. Continuous coil for one piece installation without seams. Kit includes end caps & screws ready for immediate installation. Features: Whitew/Flex Chrome Insert 1-5/8"H x 3/4"W x 70'LThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Quick Guide (pdf)

Read more less

Concealed Soft Draw Latch with Keeper - Black RubberThe soft body construction of these latches quiets vibration and provides satisfactory performance despite misalignment. Internally-mounted lever provides over-center action for mechanical advantage in closing, plus protection against accidental opening Molded latch body conceals mechanism and mounting hardware Right-angle keeper design permits use in applications where panel is perpendicular to the frame Non-corrosive materials permit use in outdoor environments Provides steady state clamp force of 49 N (11 lbs.) at recommended mounting dimensions Industry Applications Appliance Electronic Enclosures Food Equipment HVAC Lawn/Garden Equipment Marine Medical

Read more less

Concealed Soft Draw Latch with Keeper - White RubberThe soft body construction of these latches quiets vibration and provides satisfactory performance despite misalignment. Internally-mounted lever provides over-center action for mechanical advantage in closing, plus protection against accidental opening Molded latch body conceals mechanism and mounting hardware Right-angle keeper design permits use in applications where panel is perpendicular to the frame Non-corrosive materials permit use in outdoor environments Provides steady state clamp force of 49 N (11 lbs.) at recommended mounting dimensions Industry Applications Appliance Electronic Enclosures Food Equipment HVAC Lawn/Garden Equipment Marine Medical Quick Guide (pdf)

Read more less

Stud Catch Length: 2-1/4" Width: 7/16" Fastener: #8(4) Material: Brass Quick Guide (pdf)

Read more less

Combination Vented Gas Fill/Tank for 1-1/2" Hose - 35° Angled Neck Features: 35° Angled Neck Black Polymer Integral Tank Vent with Flame Arrestor No Ground Wire Required Flip Top Cap Specifications: For Hose Size: 1-1/2" For Vent Size: 5/8" Neck Length: 2-7/16 " Screw Size: #10

Read more less

Surface Mount & Latch - Black Body, Chrome Handle, Offset Cam Bar, 3/4" - 2-3/8"Features: Polymer body T Handle Stainless Steel Stem Lock with 2 keys Offset cam bar Easily Installs in a 2-1/2 Inch Diameter Hole for Mounting Surfaces 1/8 to 3/4 Inch Thick The T - Handle drops down flush in either the open or closed (180x Rotation) position. (except with the offset cam bar positioned upward) The rubber seal & boot under the T - Handle seals the lock cylinder preventing water intrusion Specs: Face Plate Diameter: 3" Body Color: Black Handle Color: Chrome Adjustment Cam Bar Inches: 3/4 - 2-3/8"

Read more less

Gas Tank Vent w/Swivel Elbow - Chrome/BlackFeatures: Chrome Plated Zinc Alloy Cap with Zinc Alloy Elbow Black or White Polymer Splash Guards Removable 30 Mesh Stainless Steel Wire Screen Flame Arrestor - for use with fuel applications Design Allows Elbow to be Rotated to any Position Specs: For Hose Size: 5/8" Max. Hull Thickness: 1"

Read more less

2" Rub Rail End Cap - WhiteComplete your Rub Rail installation with our Rub Rail End Caps - available in white nylon for a secure fit.Features & Benefits: Cap the rail at the stern of the boat for a finished look Ensures inserts stay intact Sold individually Durable white nylon 5-year limited warranty Specifications: Width: 2" Color/Finish: White Profiles: V11-2423 & V11-3426

Read more less

$100 Back from TACO Marine w/Qualifying Rub Rail Kit Purchases UNTIL 04/30/2026 VIEWSuproFlex Rub Rail Kit Gray with Gray Insert - 2"H x 1.2"W x 80'LThe SuproFlex Rub Rail Kit is lightweight and ultra-flexible to save you time and money while providing a seamless precision fit. The innovative SuproFlex series is co-extruded vinyl that provides two levels of hardness – ensuring enhanced protection from impact. SuproFlex Rub Rail requires minimal heating – reducing installation time and manpower. Additionally, SuproFlex Rub Rail requires no pre-forming and easily molds to most hull shapes.Features: Ideal for boats up to 65' Co-extruded to provide two levels of hardness Rigid backing and soft durometer front Shock-absorbing channels for higher impact resistance Lighter weight than traditional vinyl rub rail Requires no pre-forming and minimal heating Predrilled for fasteners Pairs with V12-0307GRD gray insert (included in the kit) Made in the USA 5-year limited warranty This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

Rub Rail End Cap - 1-7/8" - Stainless SteelStainless Steel Type 316PolishedCaps rub rail to finish end of rail and ensure that inserts stay intact.Features: Caps rub rail to finish end of rail Ensures inserts stay intact Offers a finished look Stainless Steel Marine Grade 316 Five year limited warranty This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Quick Guide (pdf)

Read more less

Stainless Steel Clamshell Ventilator 1-5/8" x 1-1/2"Features: Polished Stainless Steel 1-5/8" x 1-1/2" Screw Size: 4

Read more less

Flush Ring Pull - Chrome Plated ZincSpecs: Chrome Plated Zinc Alloy Face Plate Dimensions: 1-3/4" x 1-3/8" Screw Size: 6

Read more less