FREE SHIPPING ON ORDERS OVER $100.0 Dollars!

  • Ronstan Drain Plug & Housing - Coarse Thread - Black Nylon [RF294]

    Ronstan Ronstan Drain Plug & Housing - Coarse Thread - Black Nylon [RF294]

    Drain Plug & Housing - Coarse Thread - Black NylonFeatures: 24mm(15/16") Hole Diameter Water tight seal Retaining legs UV Stabilized Nylon plug and housing Specifications: Color: Black/Red Box Dimensions: 1"H x 2"W x 3"L WT: 0.1 lbs UPC: 9316800041589

    Read more

    $11.71 $7.99

  • Robline Waxed Whipping Twine - 0.8mm x 40M - Black [TYN-08BLKSP]

    Robline Robline Waxed Whipping Twine - 0.8mm x 40M - Black [TYN-08BLKSP]

    Waxed Whipping Twine - 0.8mm x 40M - BlackExcellent for whipping line ends, this twine is pre-waxed with a round construction and will not open because of the flat, strong seem.  The special wax formula makes this whipping twine particularly easy to use with the high quality of the twisted PES (polyester) twine.Technical Specifications: Color - Black Material - Polyester (PES) Thickness -  .03" (.8mm) Length -  131' (40 M) *Sold as an Individual Brochure (pdf)

    Read more

    $9.95 $4.99

  • Robline Waxed Whipping Twine - 0.5mm x 40M - White [TYN-05WSP]

    Robline Robline Waxed Whipping Twine - 0.5mm x 40M - White [TYN-05WSP]

    Waxed Whipping Twine - 0.5mm x 40M - White Excellent for whipping line ends, this twine is pre-waxed with a round construction and will not open because of the flat, strong seem.  The special wax formula makes this whipping twine particularly easy to use with the high quality of the twisted PES (polyester) twine.Technical Specifications: Color - White Material - Polyester (PES) Thickness -  .02" (.5mm) Length -  131' (40 M) *Sold as an Individual Brochure (pdf)

    Read more

    $9.95 $5.99

  • Wichard Webbing Snap Shackle - 3-1/8" [02374] Wichard Webbing Snap Shackle - 3-1/8" [02374]

    Wichard Marine Wichard Webbing Snap Shackle - 3-1/8" [02374]

    Web Snap Shackle - 3-1/8"Features: HR Forged snap shackle (Grade 17.4 PH stainless steel) with webbing swivel. Its flat design allows attaching a webbing Free rotation of the snap shackle thanks to the swivel eye The plunger pin is set captive into the hook and cannot become detached Excellent working and breaking loads Easy to open by pulling the plunger pin (possible to attach a lanyard) Applications: Snap shackle applications Applications requiring a free rotation of the snap shackle (for a better sail orientation) Specifications: Materials: HR 17.4 PH stainless steel grade Working load: (lb) 2110 / (kg) 960  Breaking load: (lb) 4400 / (kg) 2000  Weight: (lb) 0.187 / (g) 85  Dimensions: A: (inch) 5/8" / (mm) 16  B: (inch) 1 3/16" / (mm) 30  Length: (inch) 3 5/32" / (mm) 80  Caption: Working Load (WL): For nautical applications Working Load Limit (WLL): For industrial applications only. The safety factor is 5 times the breaking load. WLL = Breaking load / 5 High Resistance (HR) *Sold as an Individual Quick Guide (pdf)

    Read more

    $135.85 $115.47

  • Ronstan Leech Tails - Set of 3 [RF4026]

    Ronstan Ronstan Leech Tails - Set of 3 [RF4026]

    Leech Tails - Set of 3Essential guide for porper sail trim. Adhesive patches to ensuer permanent bond with sail. High resolution fabric tails for maximum visibility.

    Read more

    $10.89 $7.99

  • Harken 60mm Single Aluminum Element Block w/Swivel [6260] Harken 60mm Single Aluminum Element Block w/Swivel [6260]

    Harken Harken 60mm Single Aluminum Element Block w/Swivel [6260]

    60mm Single Aluminum Element Block with SwivelElement blocks introduce sideplates that combine forged aluminum and compound curves for strength. They are simultaneously contemporary and very robust. Element’s design pairs the minimum amount of metal required to protect the sheave with a proven journal bearing. So size for size, Element is priced significantly lower, than our previously least expensive blocks.Sideplates are hardcoat-anodized to resist corrosion. A tough composite bearing sheave resists corrosion for a long service life.Features: Sheave Ø (mm): 60 mm Sheave Ø (in): 2-3/8 in Maximum line Ø (mm): 14 mm Maximum line Ø (in): 9/16 in Maximum working load (kg): 1100 kg Maximum working load (lb): 2425 lb

    Read more

    $66.15

  • Harken Carbo OneTouch Locking Winch Handle [B10HOT]

    Harken Harken Carbo OneTouch Locking Winch Handle [B10HOT]

    Carbo OneTouch Locking Winch HandleLightweight and fast-acting, the Carbo OneTouch ball bearing locking winch handle makes grinding winches easy! Racers will maneuver faster and cruisers will have confidence in a reliable and easy-to-use winch handle. The Carbo OneTouch locks in and out of the winch using its patented locking mechanism and ergonomically designed grab bar. It only takes one hand to set or release the handle—squeeze anywhere along the grab bar with your palm to unlock; release the bar for a secure lock. Harken added SpeedGrip handle technology to the OneTouch for fast and efficient winching. Its independent swivel between the ball bearing knob and hand-grip allows fast trimming using the palm for low-loads, and powerful two-handed grinding when loads are high. At just 590 g (20.8 oz), the Harken Carbo OneTouch is built to be strong but lightweight. The grab bar and main handle are made of the same tough material as our Carbo block line: high-strength, fiber-reinforced composite, UV-stabilized for excellent protection against long-term exposure to saltwater and sun. The handle and grab bar are cross-ribbed and braced for enhanced stiffness. An aluminum grip rod mates seamlessly to a forged aluminum handle insert to manage bending stresses. The black hard-coat-anodized octagonal drive gear is also integrated into the molding process, resulting in an extremely strong, one-piece structure. Its locking pins are tough 316 marine-grade stainless steel. OneTouch is a registered trademark of Donald J. Steiner.Features: Molded urethane knob for comfortable feel and better grip when palming the handle. Handles feature an independent swivel between the knob and handle to keep the wrist straight and arms in the best power position while grinding. The patented locking mechanism features two stainless steel pins that automatically retract when the handle’s full-length grab bar is squeezed, and extend when it is released for a solid, secure lock. Handles feature a ball bearing grip that efficiently transmits power into the winch. Owner's Manual (pdf)

    Read more

    $145.35 $99.99

  • Blue Performance Bunk Net [PC600]

    Blue Performance Blue Performance Bunk Net [PC600]

    Bunk NetThe Blue Performance Bunk Net is perfect for preventing a person from rolling out of bed or storing equipment in rough weather.Features: Ripstop nylon reinforced with nylon webbing and polyester borders Two mesh everyday bags, perhaps for glasses and a watch 37cm straps on the bottom edge For the strongest support, straps can be tucked in under the mattress and bolted/screwed into place Specifications (L x H):P600: (inch) 66.9 x 20.9 + 14.6" straps / (mm) 1700 x 530 + 370mm straps*Sold as an Individual

    Read more

    $93.80

  • Harken Marine Grip Tape - 2 x 12" - Black -10 Pieces [MG1002-BLK]

    Harken Harken Marine Grip Tape - 2 x 12" - Black -10 Pieces [MG1002-BLK]

    Marine Grip Tape - 2 x 12" - Black -10 PiecesHarken Marine Grip is a thin, reliable, nonabrasive grip tape that is more effective than adhesive alternatives, waxes and other products that reduces slipping. It also stands up to extreme marine conditions on boats, docks and stairs.The superior grip is simple to install, clean and apply, and is cost-effective. And because it’s nonabrasive, it won’t damage clothing, wetsuits or skin. Harken Marine Grip is nonabsorbent, UV stable and good for all temperatures.When compared, Harken Marine Grip outgrips other adhesive alternatives and waxes.

    Read more

    $39.55

  • Harken 20mm Lead Ring [3272]

    Harken Harken 20mm Lead Ring [3272]

    20mm Lead RingLead Rings are simple, weight-saving devices used to route line for jib in-haulers, twings, barberhaulers, lazy jacks, cascading backstays and other applications requiring minimal fine-tune adjustments. Rings are Hard Lube-anodized 6061-T6 aluminum for a smooth, slippery surface, and with no moving parts, wear is minimal.Features: Center Hole: 20mm (9/16") Outer groove width: 14mm (9/16")

    Read more

    $30.95 $26.95

  • Harken 29mm Carbo Air Block w/Swivel [340]

    Harken Harken 29mm Carbo Air Block w/Swivel [340]

    29mm Carbo Air Block with SwivelLow-friction Carbo Air blocks are lightweight, strong, reliable—and affordable. Companions to the popular Harken Black Magic block line, these small, compact blocks have very high working loads for safe, easy trimming.Specifications: Sheave: 29mm / 1-1/8in Length: 66mm / 2-5/8in Weight: 26g / .9oz Shackle pin: 4mm / 5/32in Maximum line: 8mm / 5/16in Maximum working load: 150kg / 330lb Breaking load: 454kg / 1000lb

    Read more

    $32.95 $28.95

  • Harken 16mm Block w/Swivel [417]

    Harken Harken 16mm Block w/Swivel [417]

    16mm Block with SwivelThe 16 mm is Harken’s® smallest block. It is perfect for small synthetic control lines found on high-tech dinghies. The patented bearing system uses stainless steel balls in a captive grooved race and has a 250 lb (113 kg) maximum working load.Specifications: Sheave: 16mm / 5/8in. Length: 46mm / 1-13/16in. Weight: 18g / .63oz Shackle pin: 4mm / 5/32in Maximum line: 5mm / 7/32 Maximum working load: 113kg/ 250lb Breaking load: 339kg / 750lb

    Read more

    $35.70 $31.95

  • Harken Micro Cam-Matic Aluminum Cleat [468]

    Harken Harken Micro Cam-Matic Aluminum Cleat [468]

    Micro Cam-Matic Aluminum CleatHarken® ball bearing cam cleats hold lines securely and release instantly for easy, precise trimming. Aluminum Cam-Matics® are hardcoat-anodized for high-load, high-wear, continuous adjustment applications.Specifications: Height: 22mm / 7/8in. Length: 48mm / 1-7/8in. Width: 24mm / 15/16in. Weight: 26g / .93oz Minimum line: 2mm / 3/32in Maximum line: 6mm / 1/4in. Fastener spacing: 27mm / 1-1/16in. Fasteners: 4 RH mm / #8 RH in. Maximum working load: 91kg/ 200lb Breaking load: 181kg / 400lb Pawls: Aluminum

    Read more

    $41.50 $36.95

  • Harken 8mm High Resistance "D" Shackle [2116]

    Harken Harken 8mm High Resistance "D" Shackle [2116]

    8mm High Resistance "D" ShackleForged stainless steel shackles are polished to a high luster and are stamped with the screw pin diameter. High-Resistance (HR) shackles are forged in 17-4PH stainless steel to handle high loads. They have an "HR" imprint for easy identification.Specifications: Shackle pin: 8mm / 5/16in Weight: 56.5g / 2oz Maximum working load: 2330kg / 5130lb Breaking load: 4650kg / 10260lb

    Read more

    $87.75 $76.95

  • Harken 40mm Carbo Air Fiddle Block w/Swivel [2655]

    Harken Harken 40mm Carbo Air Fiddle Block w/Swivel [2655]

    40mm Carbo Air Fiddle Block with SwivelLow-friction Carbo Air blocks are lightweight, strong, reliable—and affordable. Companions to the popular Harken® Black Magic® line, these small, compact blocks have very high working loads for safe, easy trimming. The 40 mm fiddle is an excellent choice for 3:1 and 4:1 tackles on dinghy vangs and mainsheets, as well as for controls such as cunninghams and internal boom outhauls on larger boats.Specifications: Sheave: 40mm / 1-9/16in Length: 115mm / 4-1/2in Weight: 51g / 1.8oz Shackle pin: 4mm / 5/32in Maximum line: 10mm / 3/8in Maximum working load: 220kg / 485lb Breaking load: 735kg / 1620lb

    Read more

    $58.60 $51.95

  • Harken Micro Carbo-Cam Cleat [471]

    Harken Harken Micro Carbo-Cam Cleat [471]

    Micro Carbo-Cam CleatHarken® ball bearing cam cleats hold lines securely and release instantly for easy, precise trimming. Lightweight fiber-reinforced Carbo-Cams® for racing where weight is critical, or where adjustments are less frequent.Specifications: Height: 22mm / 7/8in. Length: 48mm / 1-7/8in. Width: 24mm / 15/16in. Weight: 19g / .67oz Minimum line: 3mm / 1/8in Maximum line: 6mm / 1/4in. Fastener spacing: 27mm / 1-1/16in. Fasteners: 4 RH mm / #8 RH in. Maximum working load: 68kg/ 150lb Breaking load: 136kg / 300lb Pawls: Plastic carbon-matrix

    Read more

    $36.50 $31.95

  • Harken 37.12mm Forged Eyestrap [2133]

    Harken Harken 37.12mm Forged Eyestrap [2133]

    37.12mm Forged EyestrapEyestraps are useful accessories. They form light-duty mounting bases for blocks, serve as lash-down points, and can be used for fairleads. Specifications: Weight: 10g / .35oz Fasteners: 5 RH mm / #10 RH in Breaking load: 1130 kg / 2500lb

    Read more

    $10.70 $9.95

  • Harken 40mm Carbo Air Cheek Block [2644]

    Harken Harken 40mm Carbo Air Cheek Block [2644]

    40mm Carbo Air Cheek BlockLow-friction Carbo Air blocks are lightweight, strong, reliable—and affordable. Companions to the popular Harken Black Magic block line, these small, compact blocks have very high working loads for safe, easy trimming. Specifications: Sheave Ø (mm)40 mm Sheave Ø (in)1 9/16 in Maximum line Ø (mm)10 mm Maximum line Ø (in)3/8 in Maximum working load (kg)220 kg Maximum working load (lb)485 lb

    Read more

    $41.15 $35.95

  • Harken 22mm Micro Block [224]

    Harken Harken 22mm Micro Block [224]

    22mm Micro BlockLow-friction Micro blocks are compact and lightweight. Specifications: Sheave: 22mm / 7/8in Length: 38mm / 1-1/2in Weight: 14g / 0.5oz Maximum line: 6mm / 1/4in Maximum working load: 91kg / 200lb Breaking load: 544kg / 1200lb

    Read more

    $16.55 $14.95

  • Blue Performance Sea Rail Cover - 2 Meters [PC867]

    Blue Performance Blue Performance Sea Rail Cover - 2 Meters [PC867]

    Sea Rail Cover - 2 MetersFeatures: The outer cover of UV-resistant polyester with Velcro closure over the full length Mid-layer of durable foam The inner core of clear flexible plastic tube, spiral cut, to protect the foam mid-layer Easy to use:  Thread the wire of the rail through the inner core and foam mid-layer Fit the Ripstop cover over the foam mid-layer Fasten each end of the cover with a drawstring to prevent sliding Specifications (L):Large: (ft) 6.6 / (m) 2*Sold as an Individual Specifications: Type: Covers Box Dimensions: 2"H x 2"W x 72"L WT: 1.7 lbs UPC: 8715738008670

    Read more

    $76.20

  • Schaefer Fast Entry Cam Cleat - Large [70-27]

    Schaefer Marine Schaefer Fast Entry Cam Cleat - Large [70-27]

    Fast Entry Cam Cleat - LargeFast Entry Cam Cleat. Features Die Cast Aluminum Cams, Delrin™ Ball Bearings, Computer Designed High Flare allows for easy entry at various angles. Safe Working Load 500 lbs (227kg) Line 1/4" - 5/8" (6mm - 16mm), Requires (2) 1/4" Flat Head Fasteners. 2-1/16" (52mm) Centers.

    Read more

    $60.15 $45.99

  • Schaefer Aluminum Deck Cleat - 6" [70-96]

    Schaefer Marine Schaefer Aluminum Deck Cleat - 6" [70-96]

    Aluminum Deck Cleat - 6"Length 6" (152 mm), Line Score 5/8" (16 mm), Fasteners (2), 1/4" FH (6 mm), C/C A 1-1/2" (38 mm), Weight 3.5 oz. (99 g)

    Read more

    $69.40 $52.99

  • Schaefer Series 7 Stand Up Ball Bearing Swivel Block - 2-3/8" 60mm [706-62]

    Schaefer Marine Schaefer Series 7 Stand Up Ball Bearing Swivel Block - 2-3/8" 60mm [706-62]

    Series 7 Stand Up Ball Bearing Swivel Block - 2-3/8" 60mmSingle stand up ball bearing block. Stand up spring keeps block upright when not in use. Stainless steel base spreads load out and may be used with 97-49 backing plate. (sold separately) Delrin(tm) ball bearing sheave provides a low-friction high strength sheave. Sheave Dia. 2-2/8" (60 mm), Max Line 1/2" (13 mm), Dia. includes urethane base 3-3/8" (86 mm), Height 4-25/32" (120 mm), H2 2-15/32" (63 mm), Fastener Size (4),1/4" RH (6 mm), C/C 1-11/16" (43 mm), SWL 1700 lbs (771kg), Weight Alum. 11.7 oz (332 g).

    Read more

    $265.70 $200.99

  • Schaefer Fast Entry Cam Cleat f/1/4"-7/16" Line - 6mm-12mm [70-17]

    Schaefer Marine Schaefer Fast Entry Cam Cleat f/1/4"-7/16" Line - 6mm-12mm [70-17]

    Fast Entry Cam Cleat f/1/4"-7/16" Line - 6mm-12mm70-17 Fast Entry Cam Cleat. Features Die Cast Aluminum Cams, Delrin(tm) Ball Bearings, Computer Designed High Flare allows for easy entry at various angles. Safe Working Load 300 lbs (135kg) Line 1/4" - 7/16" (6mm - 12mm), Requires (2) #10 Flat Head Fasteners. 1.5" (38mm) Centers. Matches Competitors Center to center measurements. Specifications: Color: Black Box Dimensions: 1"H x 4"W x 4"L WT: 0.3 lbs UPC: 740507903793

    Read more

    $48.35 $36.99

  • Schaefer Cat Hawk Wind Indicator f/Non-Spin Catamarans up to 8M [H005F00]

    Schaefer Marine Schaefer Cat Hawk Wind Indicator f/Non-Spin Catamarans up to 8M [H005F00]

    Cat Hawk Wind Indicator for Non-Spin Catamarans up to 8MThe Cat Hawk is designed for non-spinnaker Catamarans up to 8m. It has been developed to mount onto the front of the Forestay Bridle where it is ideally situated for maximum visibility both upwind and downwind. The Cat Hawk uses the same Vane Arm as the Hawk with all the benefits of Balance, "V" Jewel bearing, weight and UV Protection that it brings. The reference arms can be set for either upwind or downwind angles. The Support Rod is aluminum and has the Hawk quick mount clip for quick rigging and de-rigging. Specifications: Vane Arm length 25cm (9.8") Weight 30 grams Specifications: Type: Wind Indicator Instrument Function: Wind Box Dimensions: 2"H x 4"W x 13"L WT: 0.25 lbs UPC: 652773100304

    Read more

    $84.55 $63.99

  • Schaefer Investment Cast Pad Eye - 3" OD Base [78-17]

    Schaefer Marine Schaefer Investment Cast Pad Eye - 3" OD Base [78-17]

    Investment Cast Pad Eye - 3" OD Base316 Stainless Steel includes delrin(tm) base. Order Backing Plate 97-54 separately. Specifications:  Eye Width 1-1/8" (29 mm) Eye Height 7/8" (22 mm) Eye Stock 1/2" (13 mm) Length 3" (76 mm) Width 3" (76 mm) Fasteners (4), 3/8" FH (10 mm) C/C A 1-1/8" (29 mm) C/C B 1-11/16" (43 mm) SWL 8500 lbs. (3800 kg) Specifications: Color: Stainless Box Dimensions: 2"H x 4"W x 5"L WT: 0.75 lbs UPC: 740507007866

    Read more

    $121.90 $91.99

  • Schaefer Handi-Hanger [HH] Schaefer Handi-Hanger [HH]

    Schaefer Marine Schaefer Handi-Hanger [HH]

    Handi-HangerHandi-Hangers are used in the cockpit or stern pulpit to organize line, fenders, life rings, hose etc. Use on 7/8" or 1" tubing, coated lifeline or remove the backing to mount on a bulkhead.Safe Working load 20 lbs.

    Read more

    $25.20 $18.99

  • Schaefer T-Track Endstop f/1-1/4" Track - Black [74-36]

    Schaefer Marine Schaefer T-Track Endstop f/1-1/4" Track - Black [74-36]

    T-Track Endstop for 1-1/4" Track - Black1 1/4" Black Endstop   Specifications: Color: Black Box Dimensions: 1"H x 2"W x 4"L WT: 0.1 lbs UPC: 740507007262

    Read more

    $9.75 $7.99

  • Schaefer T-Track Endstop f/1" Track - Black [74-35]

    Schaefer Marine Schaefer T-Track Endstop f/1" Track - Black [74-35]

    T-Track Endstop for 1" Track - Black1" Black Endstop Specifications: Color: Black Box Dimensions: 1"H x 2"W x 4"L WT: 0.5 lbs UPC: 740507007248

    Read more

    $9.75 $7.99

  • SChaefer T-Track Endstop for 1-1/4" Track - Grey [74-36-G]

    Schaefer Marine SChaefer T-Track Endstop for 1-1/4" Track - Grey [74-36-G]

    T-Track Endstop for 1-1/4" Track - Grey1 1/4" Grey Endstop   Specifications: Color: Grey Box Dimensions: 1"H x 2"W x 5"L WT: 0.05 lbs UPC: 740507007279

    Read more

    $9.75 $7.99

  • Schaefer Mid-Rail Chock/Cleat Stainless Steel - 1-1/4" [70-75] Schaefer Mid-Rail Chock/Cleat Stainless Steel - 1-1/4" [70-75]

    Schaefer Marine Schaefer Mid-Rail Chock/Cleat Stainless Steel - 1-1/4" [70-75]

    Mid-Rail Chock/Cleat Stainless Steel - 1-1/4"Chock cleats will fit Schaefer T-Track measuring 1-1/4" wide, 7/16" overall height, 3/16" "T" thickness and a base width of 11/16". They will not fit earlier versions of T-Track or some competitors models. Specifications: Length 7-1/2" (190 mm) ID 1-3/4" (45 mm) Line Size 5/8" (16 mm) Track 1-1/4" x 3/16" (31 mm x 4.6 mm) Pin. Size .355 SWL 4500 lbs. (2045 kg) Weight 1.5 lbs. (.68 kg) Specifications: Color: Stainless Box Dimensions: 2"H x 3"W x 9"L WT: 1.6 lbs UPC: 740507024139

    Read more

    $224.30 $168.99

  • Schaefer Stand-Up Swivel w/Aluminum Cheeks [504-62]

    Schaefer Marine Schaefer Stand-Up Swivel w/Aluminum Cheeks [504-62]

    Stand-Up Swivel with Aluminum CheeksDelrin™ sheave ensures smooth operation and high safe working load. Specifications: Sheave Dia. 2" (51 mm) Max Line 7/16" (11 mm) Diameter includes urethane base 2-7/8" (73 mm) Height 4-1/32" (103 mm) H2 2-3/32" (54 mm) Fastener Size (4), #10 RH (5 mm) C/C 1-12/31" (36 mm) SWL 1750 lbs. (790 kg) Weight Alum. 7.0 oz. (198 g) #97-48 BACKING PLATE SOLD SEPARATELY

    Read more

    $212.90 $160.99

  • Davis Tiller Tamer [2205]

    Davis Instruments Davis Tiller Tamer [2205]

    Tiller-TamerMaintains cruising course with no hands, in any weather or wind condition. The tension is smoothly adjustable from fully locked to fully free. Tiller-Tamer gives improved control and feel to the tiller handle. Does not interfere with automatic steering systems. No loss of cockpit space. No need to lash the tiller when boat is moored or trailered. Specifications: Color: Black Box Dimensions: 2"H x 5"W x 9"L WT: 0.3 lbs UPC: 011698220502 Quick Guide (pdf)

    Read more

    $54.99 $44.99

  • Davis Air-Flow Tels - Set of 14 [950]

    Davis Instruments Davis Air-Flow Tels - Set of 14 [950]

    Air-Flow TelsLightweight, ripstop nylon Air-Flow Tels attach to sails with waterproof adhesive locator discs. No holes required. Tels show the air flow across the sails - allowing you to trim sails for maximum performance. Each kit includes 14 Tels and full instructions on where to apply them and how to read them. Specifications: Instrument Function: Wind Box Dimensions: 2"H x 4"W x 8"L WT: 0.05 lbs UPC: 011698009503 Quick Guide (pdf)Brochure (pdf)

    Read more

    $19.99 $17.99

  • Barton 32mm Pin Genoa Car Track Pin Stop Standard Duty - Black [32100GTB]

    Barton Marine Barton 32mm Pin Genoa Car Track Pin Stop Standard Duty - Black [32100GTB]

    32mm Pin Genoa Car Track Pin Stop Standard Duty - BlackBarton Marine introduces its new sleek range of Genoa designed to run on 32mm (1 ¼”) T Track. All are manufactured from high-grade aluminum with our unique Spectro anodized finish for superior protection in marine environments. A black anodized finish is also available. Designed over 18 months to meet the requirements of OEMs, riggers, and sailing enthusiasts who want high performance and longevity captured in contemporary design. The new range is a class above the norm and features molded nylon inserts to prevent damage to the low-friction anodized finish and ensure smooth running in all marine environments. All Genoa Cars in this range are available in a heavy-duty HD version for large craft or for larger load applications.Features: Spectro or Black anodized finish The stainless steel plunger stops with positive action Moulded nylon slide inserts ensure free running Large, easy-grip plunger knobs with twist and lock facility Heavy-duty Genoa car options Brochure (pdf)

    Read more

    $214.50 $175.99

  • Barton 32mm Pin Genoa Car Track Pin Stop Standard Duty [32100GT]

    Barton Marine Barton 32mm Pin Genoa Car Track Pin Stop Standard Duty [32100GT]

    32mm Pin Genoa Car Track Pin Stop Standard DutyBarton Marine introduces its new sleek range of Genoa designed to run on 32mm (1 ¼”) T Track. All are manufactured from high-grade aluminum with our unique Spectro anodized finish for superior protection in marine environments. A black anodized finish is also available. Designed over 18 months to meet the requirements of OEMs, riggers, and sailing enthusiasts who want high performance and longevity captured in contemporary design. The new range is a class above the norm and features molded nylon inserts to prevent damage to the low-friction anodized finish and ensure smooth running in all marine environments. All Genoa Cars in this range are available in a heavy-duty HD version for large craft or for larger load applications.Features: Spectro or Black anodized finish The stainless steel plunger stops with positive action Moulded nylon slide inserts ensure free running Large, easy-grip plunger knobs with twist and lock facility Heavy-duty genoa car options Brochure (pdf)

    Read more

    $199.95 $163.99

  • ANDERSEN 18 ST FS Self-Tailing Manual Single Speed Winch - Full Stainless [RA2018010000]

    ANDERSEN ANDERSEN 18 ST FS Self-Tailing Manual Single Speed Winch - Full Stainless [RA2018010000]

    18 ST FS Self-Tailing Manual Single Speed Winch - Full StainlessPower Rib™ANDERSEN Winches feature the Power Rib™. Unlike other winches with abrasive drum surfaces, ANDERSEN winch drums have vertical ribs running up the surface. This combined with the smooth polished stainless steel gives a maximum grip and minimum wear on ropes, reducing the replacements costs of sheets and halyards. What’s more, the Power Rib principle simply makes sailing more pleasurable. Fewer turns on the winch make tacking easier. Sheets can be gently eased out without harsh snatching and the risks of overrides and jammed sheets are significantly reduced. The grip provided by the ribs will remain the same year after year, unlike many other winches with an abrasive or sandpaper-like surface. Such surfaces have a tendency to wear down both ropes and themselves.Power RatioPower Ratio is the mechanical advantage of the winch and is calculated as follows:length of handle x gear ratio           radius of drumThe pull of the winch is based on the Power Ratio and not just on the physical size of the winch or the diameter of the drum. The Power Ratio is used to determine the load the winch may handle as follows: pull of handle (kg x Power Ratio = pull of winch (kg).This means that by applying a load of 10kg, using a 10" standard handle, on a Power Ratio 40:1 winch, the winch can pull 400kg, assuming that the winch is 100% efficient. This is not possible in practice as the efficiency is reduced by internal mechanical friction losses.Specifications: Drum Ø D: 2-3/4" Base Ø B: 4-3/4" Height H: 5-1/4" Line Entry L: 1-15/16" Line Size: 1/8-11/16" Weight: 7.0lb Gear ratio 1st speed: 2.6 : 1 Power ratio 1st speed: 18.8 :1 Quick Guide (pdf)

    Read more

    $799.00 $701.10

  • ANDERSEN 40 ST FS - 2-Speed Self-Tailing Manual Winch - Full Stainless Steel [RA2040010000]

    ANDERSEN ANDERSEN 40 ST FS - 2-Speed Self-Tailing Manual Winch - Full Stainless Steel [RA2040010000]

    40 ST FS - 2-Speed Self-Tailing Manual Winch - Full Stainless SteelIf you take pride in having your yacht look its best, ANDERSEN's Full Stainless Self-Tailing Winch creates the dock-stopping appeal you desire. It combines all the convenience and power of ANDERSEN's self-tailing winch with a stunning all stainless steel look.From top to bottom the drive shaft stripper arm, self-tailing jaws, drum and upper & lower trim rings are manufactured in highest quality and beautifully polished grade 316 stainless steel. The dramatic result is a highly reflective winch that becomes a highlight of the boat and a true reflection of your yachting pride. We like to say, “Full Stainless – Beyond Good Looks.”As with all ANDERSEN Winches™, our Full Stainless Self-Tailing winch features the exclusive stainless steel Power Rib™ drum for maximum power and extended line life. This model also uses our exclusive self-tailing device that automatically accommodates a wide range of different line sizes.MaterialsAndersen winch drums are produced from grade 316L stainless steel, cold formed in stages during manufacture to further increase strength and hardness as it takes its final form. The resulting construction is lightweight, yet stiff and unyielding. Drive shafts are in grade 329 duplex stainless steel. Pawls are cut from a cold pressed profile in grade 316 stainless steel and are virtually unbreakable. The upper center stems are manufactured from aluminum bronze for ultimate durability. The combination of materials and design contribute to a lightweight, rigid final assembly that enhances. the mechanical efficiency of the winch. Andersen winces are of similar weight to winches with aluminum drums, but are far more durable. Power Rib™ANDERSEN Winches© feature the Power Rib™. Unlike other winches with abrasive drum surfaces, ANDERSEN winch drums have vertical ribs running up the surface. This combined with the smooth polished stainless steel gives a maximum grip and minimum wear on ropes, reducing the replacements costs of sheets and halyards. What's more, the Power Rib principle simply makes sailing more pleasurable. Fewer turns on the winch make tacking easier. Sheets can be gently eased out without harsh snatching and the risks of overrides and jammed sheets are significantly reduced. The grip provided by the ribs will remain the same year after year, unlike many other winches with an abrasive or sandpaper-like surface. Such surfaces have a tendency to wear down both ropes and themselves.Power RatioPower Ratio is the mechanical advantage of the winch and is calculated as follows:length of handle x gear ratio        radius of drumThe pull of the winch is based on the Power Ratio and not just on the physical size of the winch or the diameter of the drum. The Power Ratio is used to determine the load the winch may handle as follows:pull of handle (kg x Power Ratio = pull of winch (kg).This means that by applying a load of 10kg, using a 10" standard handle, on a Power Ratio 40:1 winch, the winch can pull 400kg, assuming that the winch is 100% efficient. This is not possible in practice as the efficiency is reduced by internal mechanical friction losses.FeaturesAnderson winch drums incorporate the distinctive Power Rib which ensures a controlled grip on the line at all times, whether trimming or easing. The highly polished stainless steel surface minimizes vertical friction and allows the loaded rope turns to slide easily upward as the drum rotates, without the shuddering and excessive rope wear seen on winches that rely on a rough surface finish for grip. Stainless steel roller bearings and ball bearings carry the highest drum loads to the center stem of the winch, minimizing efficiency losses due to friction. The self tailing arm can be rotated through 360 degrees for optimum positioning (40ST and larger). Stainless steel self-tailing jaws adjust automatically to suit various rope sizes. Andersen winches are designed for simple, straightforward installation and maintenance. Servicing is only required every two years or so, under normal use. Specifications:Drum Ø:75mm(2-15/16")Base Ø:152mm(6")Height:174mm(6-7/8")Line Entry:71mm(2-13/16")Line Size:8-14mm(1/8 - 11/16")Weight;4.9kg(10.8lbs)Gear ratio 1st speed1.3 : 1Gear ratio 2nd speed:6.0 : 1Power ratio 1st speed:8.9 : 1Power ratio 2nd speed:40.0 : 1 Quick Guide (pdf)Owner's Manual (pdf)

    Read more

    $1,329.00 $1,165.50

  • Ronstan 30QT Orbit Winch w/Quick Trim [RA6302] Ronstan 30QT Orbit Winch w/Quick Trim [RA6302]

    Ronstan Ronstan 30QT Orbit Winch w/Quick Trim [RA6302]

    30QT Orbit Winch with Quick TrimRonstan’s Orbit Winches™ are the new benchmark in high performance alloy winches. With a combination of fresh design thinking and proven manufacturing expertise, Orbit Winches™ weigh significantly less and offer lower line entry heights than any other winch in their class. Remarkably easy to service, they require no tools for disassembly or maintenance. The machined aluminium drums feature the same Power Ribs™ that many sailors will recognize from Andersen Stainless Steel Winches®, well-known for their impressive line grip, smooth control, and minimal rope wear.Power Ribs™The exceptional grip provided by the Power Ribs™ offers a multitude of benefits: requiring fewer wraps around the drum, reducing the load held in the self-tailer, and encouraging the line to slide easily upward on the drum to avoid riding turns. The non-abrasive drum surface extends the service life of running rigging and allows smooth and controlled easing, even under high loads.No Tools RequiredFull disassembly and reassembly can conveniently be performed without the need for any tools. To remove the drum, pull back the spring-loaded release latch, and a slight anti-clockwise rotation will allow the self-tailing arm to be lifted from the winch. From there, the drum can be removed from the winch's center stem. When completing reassembly in reverse order, an audible click confirms positive engagement between the self-tailing arm and bayonet notches on the center stem. These notches allow the self-tailing arm to be locked in one of eight positions at rotational increments of 45 degrees.Orbit Winches™ sizes 30QT and 40QT are equipped with the unique, patented QuickTrim™ self-tailer. What is QuickTrim™?QuickTrim™ allows sailors to conveniently and safely ease the line without removing the winch handle or taking the line out of the self-tailer.A small anti-clockwise rotation of the self-tailing cover allows the self-tailer to turn beneath it like a sheave as the rope is eased, with confident grip and control assured by the drum’s smooth surface and Power Ribs™.Letting the top cover spring back into place locks the self-tailer again to resume normal use.Features: Lightweight machined aluminum drum Distinctive Power Ribs™ ensures a controlled grip at all times, whether tensioning or easing Proven Andersen winch gearing configuration No tools are required for configuration and servicing Sprung self-tailing jaws to accept 6-10mm line QuickTrim™ patented self-tailing feature for rapid sail trim and smooth adjustment (30QT & 40QT only) Materials: Hard anodized aluminum drum and center stem, aluminum self-tailing arm Grade 316 stainless steel shaft and pawls Grade 2205 stainless steel axle pins Aluminum bronze gears Glass-filled nylon self tailer Self-lubricating acetal bearings Specifications: Weight (kilogram): 3.1kg Power Ratio: 30.2:1 Base Diameter (millimeters): 136mm Maximum Pulling Load (kilogram): 700kg Drum Diameter (millimeters): 86mm Base Diameter (millimeters): 136mm Height (millimeters): 166mm Line Entry L (millimeters): 57mm Line Size (millimeters): 7-12mm Gear Ratio 1st Speed: 1.4:1 Gear Ratio 2nd Speed: 5.2:1 Power Ratio 1st Speed: 8.3:1 Power Ratio 2nd Speed: 30.2:1 Quick Guide (pdf)Owner's Manual (pdf)

    Read more

    $959.00 $909.00

  • Ronstan 20ST Orbit Winch 1 Speed [RA6201] Ronstan 20ST Orbit Winch 1 Speed [RA6201]

    Ronstan Ronstan 20ST Orbit Winch 1 Speed [RA6201]

    20ST Orbit Winch 1 SpeedRonstan’s Orbit Winches™ are the new benchmark in high performance alloy winches. With a combination of fresh design thinking and proven manufacturing expertise, Orbit Winches™ weigh significantly less and offer lower line entry heights than any other winch in their class. Remarkably easy to service, they require no tools for disassembly or maintenance. The machined aluminium drums feature the same Power Ribs™ that many sailors will recognize from Andersen Stainless Steel Winches®, well-known for their impressive line grip, smooth control, and minimal rope wear.Power Ribs™The exceptional grip provided by the Power Ribs™ offers a multitude of benefits: requiring fewer wraps around the drum, reducing the load held in the self-tailer, and encouraging the line to slide easily upward on the drum to avoid riding turns. The non-abrasive drum surface extends the service life of running rigging and allows smooth and controlled easing, even under high loads.No Tools RequiredFull disassembly and reassembly can conveniently be performed without the need for any tools. To remove the drum, pull back the spring-loaded release latch, and a slight anti-clockwise rotation will allow the self-tailing arm to be lifted from the winch. From there, the drum can be removed from the winch's center stem. When completing reassembly in reverse order, an audible click confirms positive engagement between the self-tailing arm and bayonet notches on the center stem. These notches allow the self-tailing arm to be locked in one of eight positions at rotational increments of 45 degrees.Features: Lightweight machined aluminum drum Distinctive Power Ribs™ ensures a controlled grip at all times, whether tensioning or easing Proven Andersen winch gearing configuration No tools are required for configuration and servicing Sprung self-tailing jaws to accept 6-10mm line Materials: Hard anodized aluminum drum and center stem, aluminum self-tailing arm Grade 316 stainless steel shaft and pawls Grade 2205 stainless steel axle pins Aluminum bronze gears Glass-filled nylon self tailer Self-lubricating acetal bearings Specifications: Weight (kilogram): 1.7kg Power Ratio: 18.3:1 Base Diameter (millimeters): 120mm Maximum Pulling Load (kilogram): 550kg Drum Diameter (millimeters): 75mm Base Diameter (millimeters): 120mm Height (millimeters): 124mm Line Entry L (millimeters): 42mm Line Size (millimeters): 6-10mm Gear Ratio 1st Speed: 2.7:1 Power Ratio 1st Speed: 18.3:1 Quick Guide (pdf)Owner's Manual (pdf)

    Read more

    $699.00 $649.00

  • Ronstan 40QT Orbit Winch w/Quick Trim [RA6402] Ronstan 40QT Orbit Winch w/Quick Trim [RA6402]

    Ronstan Ronstan 40QT Orbit Winch w/Quick Trim [RA6402]

    40QT Orbit Winch with Quick TrimRonstan’s Orbit Winches™ are the new benchmark in high performance alloy winches. With a combination of fresh design thinking and proven manufacturing expertise, Orbit Winches™ weigh significantly less and offer lower line entry heights than any other winch in their class. Remarkably easy to service, they require no tools for disassembly or maintenance. The machined aluminium drums feature the same Power Ribs™ that many sailors will recognize from Andersen Stainless Steel Winches®, well-known for their impressive line grip, smooth control, and minimal rope wear.Power Ribs™The exceptional grip provided by the Power Ribs™ offers a multitude of benefits: requiring fewer wraps around the drum, reducing the load held in the self-tailer, and encouraging the line to slide easily upward on the drum to avoid riding turns. The non-abrasive drum surface extends the service life of running rigging and allows smooth and controlled easing, even under high loads.No Tools RequiredFull disassembly and reassembly can conveniently be performed without the need for any tools. To remove the drum, pull back the spring-loaded release latch, and a slight anti-clockwise rotation will allow the self-tailing arm to be lifted from the winch. From there, the drum can be removed from the winch's center stem. When completing reassembly in reverse order, an audible click confirms positive engagement between the self-tailing arm and bayonet notches on the center stem. These notches allow the self-tailing arm to be locked in one of eight positions at rotational increments of 45 degrees.Orbit Winches™ sizes 30QT and 40QT are equipped with the unique, patented QuickTrim™ self-tailer. What is QuickTrim™?QuickTrim™ allows sailors to conveniently and safely ease the line without removing the winch handle or taking the line out of the self-tailer.A small anti-clockwise rotation of the self-tailing cover allows the self-tailer to turn beneath it like a sheave as the rope is eased, with confident grip and control assured by the drum’s smooth surface and Power Ribs™.Letting the top cover spring back into place locks the self-tailer again to resume normal use.Features: Lightweight machined aluminum drum Distinctive Power Ribs™ ensures a controlled grip at all times, whether tensioning or easing Proven Andersen winch gearing configuration No tools are required for configuration and servicing Sprung self-tailing jaws to accept 6-10mm line QuickTrim™ patented self-tailing feature for rapid sail trim and smooth adjustment (30QT & 40QT only) Materials: Hard anodized aluminum drum and center stem, aluminum self-tailing arm Grade 316 stainless steel shaft and pawls Grade 2205 stainless steel axle pins Aluminum bronze gears Glass-filled nylon self tailer Self-lubricating acetal bearings Specifications: Weight (kilogram): 3.1kg Power Ratio: 39.5:1 Base Diameter (millimeters): 151mm Maximum Pulling Load (kilogram): 850kg Drum Diameter (millimeters): 86mm Base Diameter (millimeters): 151mm Height (millimeters): 166mm Line Entry L (millimeters): 57mm Line Size (millimeters): 7-12mm Gear Ratio 1st Speed: 1.4:1 Gear Ratio 2nd Speed: 6.8:1 Power Ratio 1st Speed: 8.3:1 Power Ratio 2nd Speed: 39.5:1 Quick Guide (pdf)Owner's Manual (pdf)

    Read more

    $1,149.00 $1,089.00

  • ANDERSEN 46 ST FS - 2-Speed Self-Tailing Manual Winch - Full Stainless Steel [RA2046010000]

    ANDERSEN ANDERSEN 46 ST FS - 2-Speed Self-Tailing Manual Winch - Full Stainless Steel [RA2046010000]

    40 ST FS - 2-Speed Self-Tailing Manual Winch - Full Stainless SteelIf you take pride in having your yacht look its best, ANDERSEN's Full Stainless Self-Tailing Winch creates the dock-stopping appeal you desire. It combines all the convenience and power of ANDERSEN's self-tailing winch with a stunning all stainless steel look.From top to bottom the drive shaft stripper arm, self-tailing jaws, drum and upper & lower trim rings are manufactured in highest quality and beautifully polished grade 316 stainless steel. The dramatic result is a highly reflective winch that becomes a highlight of the boat and a true reflection of your yachting pride. We like to say, “Full Stainless – Beyond Good Looks.”As with all ANDERSEN Winches™, our Full Stainless Self-Tailing winch features the exclusive stainless steel Power Rib™ drum for maximum power and extended line life. This model also uses our exclusive self-tailing device that automatically accommodates a wide range of different line sizes.MaterialsAndersen winch drums are produced from grade 316L stainless steel, cold formed in stages during manufacture to further increase strength and hardness as it takes its final form. The resulting construction is lightweight, yet stiff and unyielding. Drive shafts are in grade 329 duplex stainless steel. Pawls are cut from a cold pressed profile in grade 316 stainless steel and are virtually unbreakable. The upper center stems are manufactured from aluminum bronze for ultimate durability. The combination of materials and design contribute to a lightweight, rigid final assembly that enhances. the mechanical efficiency of the winch. Andersen winces are of similar weight to winches with aluminum drums, but are far more durable. Power Rib™ANDERSEN Winches© feature the Power Rib™. Unlike other winches with abrasive drum surfaces, ANDERSEN winch drums have vertical ribs running up the surface. This combined with the smooth polished stainless steel gives a maximum grip and minimum wear on ropes, reducing the replacements costs of sheets and halyards. What's more, the Power Rib principle simply makes sailing more pleasurable. Fewer turns on the winch make tacking easier. Sheets can be gently eased out without harsh snatching and the risks of overrides and jammed sheets are significantly reduced. The grip provided by the ribs will remain the same year after year, unlike many other winches with an abrasive or sandpaper-like surface. Such surfaces have a tendency to wear down both ropes and themselves.Power RatioPower Ratio is the mechanical advantage of the winch and is calculated as follows:length of handle x gear ratio        radius of drumThe pull of the winch is based on the Power Ratio and not just on the physical size of the winch or the diameter of the drum. The Power Ratio is used to determine the load the winch may handle as follows:pull of handle (kg x Power Ratio = pull of winch (kg).This means that by applying a load of 10kg, using a 10" standard handle, on a Power Ratio 40:1 winch, the winch can pull 400kg, assuming that the winch is 100% efficient. This is not possible in practice as the efficiency is reduced by internal mechanical friction losses.FeaturesAnderson winch drums incorporate the distinctive Power Rib which ensures a controlled grip on the line at all times, whether trimming or easing. The highly polished stainless steel surface minimizes vertical friction and allows the loaded rope turns to slide easily upward as the drum rotates, without the shuddering and excessive rope wear seen on winches that rely on a rough surface finish for grip. Stainless steel roller bearings and ball bearings carry the highest drum loads to the center stem of the winch, minimizing efficiency losses due to friction. The self tailing arm can be rotated through 360 degrees for optimum positioning (40ST and larger). Stainless steel self-tailing jaws adjust automatically to suit various rope sizes. Andersen winches are designed for simple, straightforward installation and maintenance. Servicing is only required every two years or so, under normal use. Specifications:Drum Ø:75mm(3-1/2")Base Ø:152mm(7-1/16")Height:174mm(8-1/4")Line Entry:71mm(3-9/16")Line Size:8-14mm(1/8 - 11/16")Weight;4.9kg(17.2lbs)Gear ratio 1st speed2.8 : 1Gear ratio 2nd speed:8.4 : 1Power ratio 1st speed:15.7 : 1Power ratio 2nd speed:47.1 : 1 Quick Guide (pdf)Owner's Manual (pdf)

    Read more

    $1,799.00 $1,526.40

  • ANDERSEN 28 ST FS - 2-Speed Self-Tailing Manual Winch - Full Stainless Steel [RA2028010000]

    ANDERSEN ANDERSEN 28 ST FS - 2-Speed Self-Tailing Manual Winch - Full Stainless Steel [RA2028010000]

    28 ST FS - 2-Speed Self-Tailing Manual Winch - Full Stainless SteelIf you take pride in having your yacht look its best, ANDERSEN's Full Stainless Self-Tailing Winch creates the dock-stopping appeal you desire. It combines all the convenience and power of ANDERSEN's self-tailing winch with a stunning all stainless steel look.From top to bottom the drive shaft stripper arm, self-tailing jaws, drum and upper & lower trim rings are manufactured in highest quality and beautifully polished grade 316 stainless steel. The dramatic result is a highly reflective winch that becomes a highlight of the boat and a true reflection of your yachting pride. We like to say, “Full Stainless – Beyond Good Looks.”As with all ANDERSEN Winches™, our Full Stainless Self-Tailing winch features the exclusive stainless steel Power Rib™ drum for maximum power and extended line life. This model also uses our exclusive self-tailing device that automatically accommodates a wide range of different line sizes.MaterialsAndersen winch drums are produced from grade 316L stainless steel, cold formed in stages during manufacture to further increase strength and hardness as it takes its final form. The resulting construction is lightweight, yet stiff and unyielding. Drive shafts are in grade 329 duplex stainless steel. Pawls are cut from a cold pressed profile in grade 316 stainless steel and are virtually unbreakable. The upper center stems are manufactured from aluminum bronze for ultimate durability. The combination of materials and design contribute to a lightweight, rigid final assembly that enhances. the mechanical efficiency of the winch. Andersen winces are of similar weight to winches with aluminum drums, but are far more durable. Power Rib™ANDERSEN Winches© feature the Power Rib™. Unlike other winches with abrasive drum surfaces, ANDERSEN winch drums have vertical ribs running up the surface. This combined with the smooth polished stainless steel gives a maximum grip and minimum wear on ropes, reducing the replacements costs of sheets and halyards. What's more, the Power Rib principle simply makes sailing more pleasurable. Fewer turns on the winch make tacking easier. Sheets can be gently eased out without harsh snatching and the risks of overrides and jammed sheets are significantly reduced. The grip provided by the ribs will remain the same year after year, unlike many other winches with an abrasive or sandpaper-like surface. Such surfaces have a tendency to wear down both ropes and themselves.Power RatioPower Ratio is the mechanical advantage of the winch and is calculated as follows:length of handle x gear ratio        radius of drumThe pull of the winch is based on the Power Ratio and not just on the physical size of the winch or the diameter of the drum. The Power Ratio is used to determine the load the winch may handle as follows:pull of handle (kg x Power Ratio = pull of winch (kg).This means that by applying a load of 10kg, using a 10" standard handle, on a Power Ratio 40:1 winch, the winch can pull 400kg, assuming that the winch is 100% efficient. This is not possible in practice as the efficiency is reduced by internal mechanical friction losses.FeaturesAnderson winch drums incorporate the distinctive Power Rib which ensures a controlled grip on the line at all times, whether trimming or easing. The highly polished stainless steel surface minimizes vertical friction and allows the loaded rope turns to slide easily upward as the drum rotates, without the shuddering and excessive rope wear seen on winches that rely on a rough surface finish for grip. Stainless steel roller bearings and ball bearings carry the highest drum loads to the center stem of the winch, minimizing efficiency losses due to friction. The self tailing arm can be rotated through 360 degrees for optimum positioning (40ST and larger). Stainless steel self-tailing jaws adjust automatically to suit various rope sizes. Andersen winches are designed for simple, straightforward installation and maintenance. Servicing is only required every two years or so, under normal use. Specifications:Drum Ø:70mm(2-3/4")Base Ø:125mm(4-15/16")Height:151mm(5-15/16")Line Entry:65mm(2-9/16")Line Size:8-14mm(1/8 - 11/16")Weight;3.9kg(8.6lbs)Gear ratio 1st speed1.3 : 1Gear ratio 2nd speed:4.0 : 1Power ratio 1st speed:9.5 : 1Power ratio 2nd speed:28.6 : 1 Quick Guide (pdf)Owner's Manual (pdf)

    Read more

    $1,129.00 $985.50

  • Wicahrd Self-Locking Long D Shackle - Diameter 5mm - 3/16" [01212] Wicahrd Self-Locking Long D Shackle - Diameter 5mm - 3/16" [01212]

    Wichard Marine Wicahrd Self-Locking Long D Shackle - Diameter 5mm - 3/16" [01212]

    Self-Locking Long D Shackle - Diameter 5mm - 3/16"Features: Self-locking long shackle forged in grade 316L stainless steel The pin is locked into one of the indentations No risks of loosening due to vibrations Outstanding working and breaking loads WLL: only for industrial applications CE Marking and batch number Applications: Standard applications of shackle requiring more length Attachment applications: blocks, head... Specifications: Materials 316 stainless steel grade Working load (lb) 880 WLL (lb) 440 Breaking load (lb) 2200 Weight (lb) 0.037 Dimensions (see 2nd image): A (inch) 1-9/64" B (inch) 25/64" C (inch) 13/64" D (inch) 25/64" D diameter (inch) 13/64" E (inch) 5/32" F (inch) 1-39/64" G (inch) 1-1/32"

    Read more

    $20.20 $17.17

  • Harken 29mm Single Bullet Block [082]

    Harken Harken 29mm Single Bullet Block [082]

    29mm Single Bullet BlockLow-friction Bullet blocks lead control lines aft. They are compact and lightweight, with fast trim and release under high or low loads. A range of styles lets these blocks adapt to almost all control line applications. Features: Sheave: 29mm (1-1/8") Maximum Line: 8mm (5/16") Maximum Working Load: 136kg (300lb)

    Read more

    $22.60 $19.95

  • Forespar Lightning Master - Static Dissipater [151100]

    Forespar Performance Products Forespar Lightning Master - Static Dissipater [151100]

    Lightning Master™ - Static DissipaterLightning Master™ Static Dissipaters lower the exposure to a direct lightning strike by controlling the conditions which trigger direct strike (i.e. they reduce the build-up of static ground charge and retard the formation of the ion “streamers” which complete the path for a lightning strike).The Dissipater employs the point-discharge principle to continually leak off the lightning causing ground potential in low amperages over a long period of time instead of the short duration, high amperage discharge occurring with a lightning strike.This is the same technology from the same manufacturer which is successfully employed to protect commercial broadcast and television towers from direct lightning strikes. This lightweight (5.2 oz.) 21” long Dissipater mounts to the masthead and extends vertically above all other masthead equipment.We do not claim that this product is 100% effective in preventing a lightning strike. At the present collective level of understanding of the lightning phenomenon, no one can make that claim. This product does control the causes of lightning strikes and thereby reduces the incidence of direct strikes.

    Read more

    $238.95 $182.99

  • Schaefer Series 7 Flat Base/Aluminum Cheek/Delrin Sheave [704-11]

    Schaefer Marine Schaefer Series 7 Flat Base/Aluminum Cheek/Delrin Sheave [704-11]

    Series 7 Flat Base/Aluminum Cheek/Delrin SheaveDelrin™ sheave ensures smooth operation and high safe working load. Stainless steel base distributes loads to a large surface area. Specifications: Sheave Dia. 2-3/8" (60 mm) Max. Line 1/2" (13 mm) Length 4-3/8" (111 mm) Width  2-3/4" (70 mm) Height 1" (25 mm) Fasteners (4) 1/4" RH (6 mm) C/C 3-5/8" (92 mm) C/C (wide end) 2" (51mm) C/C (narrow end) 1-9/16" SWL 2250 lbs. (1020 kg) Weight Alum. 9.6 oz. (272 g) 

    Read more

    $146.55 $110.99

  • Lewmar V2 V3 Gypsy Stripper Kit 003 [68000363]

    Lewmar Lewmar V2 V3 Gypsy Stripper Kit 003 [68000363]

    V2 & V3 Gypsy Stripper Kit 003This is designed as a replacement gypsy for Lewmar's V1 and V2 windlasses.Features: Line Size: 5/8 in. / 16 mm Line Type: 3-strand line

    Read more

    $548.95 $360.99

You have seen 48 out of 890 products

Show more products

Footer image

© 2025 REBELLION MARINE, Powered by Shopify

    Login

    Forgot your password?

    Don't have an account yet?
    Create account

    Add address