Swivel Base Flush Mount Rod HolderPart #: RH-5367SS Medium 0 Degree Stainless SteelWithout a doubt, our swivel base rod holder is the "Ultimate Rod Holder" for the serious sportsman. Primarily designed to be used with bent butt tackle, the rod holders unique swivel base allows the rod butt to rotate in the rod holder when side pressure is applied to the tip of the rod. This is an indispensable tool, especially important in Giant Blue Fin Tuna fishing, where reel drags in the neighborhood of 60 pounds are frequently used and can result in tremendous forces being applied to the rod holder pin. Not only does this make sheared rod holder pins a thing of the past but, more importantly, it allows the tip of the rod to follow the fish. This reduces the possibility of line fraying and enhanced drag as the line streams sideways out of the roller tip instead of over the roller. The rod is also more easily removed from the holder since it is not locked on a rigid pin. The swivel base holder functions as a standard rod holder when used with straight butt rods. Straight butt rods can be manually rotated so that the line remains on the tip's roller. The amount of torque required to rotate the swivel is set by adjusting the pressure on two nylon drag washers with a half inch stainless steel lock nut at the bottom of the rod holder. Specifications: Angle: 0 Degrees Construction: Stainless Steel Diameter (Inches): 2" Finish: Polished Length (Inches): 9" Mounting Style: Flush Box Dimensions: 5"H x 6"W x 15"L WT: 2.05 lbs UPC: 096811530720

Read more less

RH5931Stainless Steel Backing Plate for 0°, 15° & 30° Medium Rod Holders.

Read more less

RH5167VVertical 0° Short TubeMedium size Short Swivel Base for Stand-Up Rods with Curved Butts. Has 2" OD x 6-1/2" long tube.Without a doubt, our swivel base rod holder is the Ultimate Rod Holder for the serious sportsman. Primarily designed to be used with bent butt tackle, the rod holders unique swivel base allows the rod butt to rotate in the rod holder when side pressure is applied to the tip of the rod. This is an indispensable tool, especially important in Giant Blue Fin Tuna fishing, where reel drags in the neighborhood of 60 pounds are frequently used and can result in tremendous forces being applied to the rod holder pin. Not only does this make sheared rod holder pins a thing of the past but, more importantly, it allows the tip of the rod to follow the fish. This reduces the possibility of line fraying and enhanced drag as the line streams sideways out of the roller tip instead of over the roller. The rod is also more easily removed from the holder since it is not locked on a rigid pin. The swivel base holder functions as a standard rod holder when used with straight butt rods. Straight butt rods can be manually rotated so that the line remains on the tips roller. The amount of torque required to rotate the swivel is set by adjusting the pressure on two nylon drag washers with a 1/2 inch stainless steel lock nut at the bottom of the rod holder. Specifications: Angle: 0 Degrees Construction: Stainless Steel Diameter (Inches): 2" Finish: Polished Length (Inches): 6-1/2" Mounting Style: Flush Box Dimensions: 4"H x 6"W x 14"L WT: 1.9 lbs UPC: 096811516526

Read more less

King Fish Rod Holder - BlackBolt-on king fish rod holder. They are designed to be mounted under the hardtops, for King Fish. It's also great for Stripper Bass and running Mojos. Black to match some hardtops. Mount with four 1/4" bolts, hardware not included. Please measure your hardtop before ordering.

Read more less

Aluminum Clamp-on Rod HoldersModel:  RA5001GLColor:   GoldFits:      1.050" O.D. PipeMount:  VerticalJUST CLAMP THEM ON! Aluminum rod holders that are as beautiful as they are functional. With no hassle or wear and tear on your boat you can install these rod holders with only an Allen Wrench. No lengthy trips to the tower builder for custom installation at custom prices. Simply place the two halves of the clamp around the pipe, insert the bolts and tighten. Install them wherever you like. If later, you don't like the position, simply move them.These Rod Holders are the perfect solution for boats with wiring or hydraulic lines inside their tower legs. Now you can install Rod Holders on your Tower, Hard Top, T-Top, Radar Arch, Rails, Poling Platform or any structure made from standard size aluminum pipe.All Holders come lined with a heavy duty white vinyl insert. The Clamping portion of the Rod Holder is precision made for an exact fit. Four Marine Grade Stainless Bolts assure an even clamping pressure and a secure bond. The clamp is welded to the tube with either a fin or an oval rod for maximum strength. The completed Rod Holder is then meticulously polished to a mirror finish. These holders are designed primarily for storage but may be used for light tackle trolling. Specifications: Construction: Anodized Aluminum Diameter (Inches): 2.14" Finish: Gold Length (Inches): 10" Mounting Style: Rail Box Dimensions: 4"H x 9"W x 12"L WT: 1.75 lbs UPC: 096811500129

Read more less

Rod Butt Extender for Standard & Heavy Swivel Base Rod HoldersComes with one rod butt extender that is extra strong! Made of pure stainless steel. Used on short-butt rods and heavy-duty rod holders and will now fit in heavy swivel base rod holders.*Sold as a single

Read more less

Rod/Reel Hanger Penn INTL 130VIS - Bright GoldSimple and efficient rod storage. Constructed of Marine Grade Anodized Aluminum with a variety of Anodized Finishes. Rod Butt is inserted into the Closed-End of the set. The vinyl insert protects the Rod Butt. Tip of Rod is placed into Locking End of set and Nylon Locking Ring is rotated to lock it in. Will support the heaviest of rods. Can be mounted Horizontally, Vertically, or Overhead. Colors are available in Satin Silver, Bright Silver, and Bright Gold. Black Powder Coat, and now available White Powder Coat!Rod & Reel Hanger SetIndividual sizes to fit the most popular big game reels. Constructed of Marine Grade Anodized Aluminum Bright Gold. The reel is attached to Hanger by spring-loaded pins riding in a bracket. Pins snap into harness lugs on top of the reel. The reel cannot swing since it is held in an upright position. Tip of Rod is placed into Locking End of set and the Nylon Ring is rotated to lock it in. Can be mounted Horizontally, Vertically, or Overhead. Available in sizes to fit most Penn, Shimano, Dual, and various other reels. Available in Gold Only.

Read more less

Rod/Reel Hanger Penn INT 70VIS Bright GoldSimple and efficient rod storage. Constructed of Marine Grade Anodized Aluminum with a variety of Anodized Finishes. Rod Butt is inserted into the Closed-End of the set. Vinyl insert protects the Rod Butt. Tip of Rod is placed into Locking End of set and Nylon Locking Ring is rotated to lock it in. Will support the heaviest of rods. Can be mounted Horizontally, Vertically, or Overhead. Colors are available in Satin Silver, Bright Silver, and Bright Gold. Black Powder Coat, and now available White Powder Coat!Rod and Reel Hanger SetIndividual sizes to fit the most popular big game reels. Constructed of Marine Grade Anodized Aluminum Bright Gold. The reel is attached to Hanger by spring-loaded pins riding in a bracket. Pins snap into harness lugs on top of the reel. The reel cannot swing since it is held in an upright position. Tip of Rod is placed into Locking End of set and the Nylon Ring is rotated to lock it in. Can be mounted Horizontally, Vertically, or Overhead. Available in sizes to fit most Penn, Shimano, Dual, and various other reels. Available in Gold Only.

Read more less

Rod/Reel Hanger Penn INT 50VISW Bright GoldSimple and efficient rod storage. Constructed of Marine Grade Anodized Aluminum with a variety of Anodized Finishes. Rod Butt is inserted into the Closed-End of the set. Vinyl insert protects the Rod Butt. Tip of Rod is placed into Locking End of set and Nylon Locking Ring is rotated to lock it in. Will support the heaviest of rods. Can be mounted Horizontally, Vertically, or Overhead. Colors are available in Satin Silver, Bright Silver, and Bright Gold. Black Powder Coat, and now available White Powder Coat!Rod and Reel Hanger SetIndividual sizes to fit the most popular big game reels. Constructed of Marine Grade Anodized Aluminum Bright Gold. The reel is attached to Hanger by spring-loaded pins riding in a bracket. Pins snap into harness lugs on top of the reel. The reel cannot swing since it is held in an upright position. Tip of Rod is placed into Locking End of set and the Nylon Ring is rotated to lock it in. Can be mounted Horizontally, Vertically, or Overhead. Available in sizes to fit most Penn, Shimano, Dual, and various other reels. Available in Gold Only. 

Read more less

King Fish Rod Holder - WhiteBolt-on king fish rod holder. It is designed to be mounted under the hardtops, for King Fish. They are also great for Stripper Bass and running Mojos. Powder-coated white to match most hardtops. Mount with four 1/4" bolts, hardware not included. Please measure your hardtop before ordering.

Read more less

7' Dredge Boom with Stainless Steel HardwareThis 7' foot long Dredge Boom is made from Heavy Wall Aluminum. Polished and Bright Dip Anodized. With Stainless hardware. It has a rod ferrule with a 1.133" Outside Diameter. Made to fit #4 or 80lb class bent butts. Also comes with 20 feet of bracing line.

Read more less

Rod Holder - Heavy Duty - 0° - Stainless SteelThe choice of boat manufacturers and consumers alike, Lee’s has been the Rod Holder Specialist for over 50 years. Lee manufacturers of over 46 different models of flush mounted rod holders. Available in two sizes, Medium (2 in O.D.) and Heavy (2 1/4 in. O.D.) three different angles (0, 15 & 30 degree) in Stainless Steel. All of our Rod Holders, are polished by hand then electropolished Lee’s has the rod holder to suit any task. Specifications: Angle: 0 Degrees Construction: Stainless Steel Diameter (Inches): 2-1/4" Finish: Polished Length (Inches): 11" Mounting Style: Surface Box Dimensions: 3"H x 6"W x 15"L WT: 2.6 lbs UPC: 096811530058

Read more less

Aluminum Side Mount Rod Holder - Tulip Style - Silver AnodizeLee's side mount rod holders are made to the same high standards with high quality materials as our aluminum clamp-on rod holders. They are useful in applications where clamp-on or flush mount holders are not practical.  Standard finishes are silver or gold anodize.Features: Aluminum Silver Anodize Side Mount Tulip Style Specifications: Construction: Anodized Aluminum Diameter (Inches): 2.14" Finish: Silver Length (Inches): 10" Mounting Style: Bulkhead Box Dimensions: 5"H x 9"W x 14"L WT: 2.05 lbs

Read more less

Close Ended Rod Holder with Hose Barb - Medium 15° - Stainless SteelFeatures: Close Ended  Medium 15° Standard 1/4" Round Pin Stainless Steel Specifications: Angle: 15 Degrees Construction: Stainless Steel Diameter (Inches): 2" Finish: Polished Length (Inches): 9" Mounting Style: Flush Box Dimensions: 5"H x 6"W x 15"L WT: 1.6 lbs UPC: 096811530676

Read more less

Rod Storage SystemsRod and Reel Hanger SetAnodized Finish: GoldFor: Avet 50WConstructed of Marine Grade Anodized Aluminum Bright Gold. Reel is attached to Hanger by spring loaded pins riding in bracket. Pins snap into harness lugs on top of reel. Reel cannot swing since it is held in upright position. Tip of Rod is placed into Locking End of set and the Nylon Ring is rotated to lock it in. Can be mounted Horizontally, Vertically or Overhead.

Read more less

Rod Storage Systems Rod and Reel Hanger SetAnodized Finish: GoldFor: Shimano Tiagra 130Constructed of Marine Grade Anodized Aluminum Bright Gold. Reel is attached to Hanger by spring loaded pins riding in bracket. Pins snap into harness lugs on top of reel. Reel cannot swing since it is held in upright position. Tip of Rod is placed into Locking End of set and the Nylon Ring is rotated to lock it in. Can be mounted Horizontally, Vertically or Overhead.

Read more less

Clamp-On Rod Holder - Black Aluminum - Horizontal Mount - Fits 1.660" O.D. PipeColor:BlackPipe Size:#3Fits:1.660" O.D. PipeMount:HorizontalJUST CLAMP THEM ON! Aluminum rod holders that are as beautiful as they are functional. With no hassle or wear and tear on your boat you can install these rod holders with only an Allen Wrench. No lengthy trips to the tower builder for custom installation at custom prices. Simply place the two halves of the clamp around the pipe, insert the bolts and tighten. Install them wherever you like. If later, you don't like the position, simply move them.These Rod Holders are the perfect solution for boats with wiring or hydraulic lines inside their tower legs. Now you can install Rod Holders on your Tower, Hard Top, T-Top, Radar Arch, Rails, Poling Platform or any structure made from standard size aluminum pipe.All Holders come lined with a heavy duty white vinyl insert. The Clamping portion of the Rod Holder is precision made for an exact fit. Four Marine Grade Stainless Bolts assure an even clamping pressure and a secure bond. The clamp is welded to the tube with either a fin or an oval rod for maximum strength. The completed Rod Holder is then meticulously polished to a mirror finish. These holders are designed primarily for storage but may be used for light tackle trolling. Specifications: Construction: Powder Coated Aluminum Diameter (Inches): 2.14" Finish: Black Length (Inches): 10" Mounting Style: Rail Box Dimensions: 4"H x 10"W x 13"L WT: 1.6 lbs UPC: 096811520332

Read more less

Clamp-On Rod Holder - White Aluminum - Horizontal Mount - Fits 1.315" O.D. PipeColor:WhitePipe Size:#2Fits:1.315" O.D. PipeMount:HorizontalJUST CLAMP THEM ON! Aluminum rod holders that are as beautiful as they are functional. With no hassle or wear and tear on your boat you can install these rod holders with only an Allen Wrench. No lengthy trips to the tower builder for custom installation at custom prices. Simply place the two halves of the clamp around the pipe, insert the bolts and tighten. Install them wherever you like. If later, you don't like the position, simply move them.These Rod Holders are the perfect solution for boats with wiring or hydraulic lines inside their tower legs. Now you can install Rod Holders on your Tower, Hard Top, T-Top, Radar Arch, Rails, Poling Platform or any structure made from standard size aluminum pipe.All Holders come lined with a heavy duty white vinyl insert. The Clamping portion of the Rod Holder is precision made for an exact fit. Four Marine Grade Stainless Bolts assure an even clamping pressure and a secure bond. The clamp is welded to the tube with either a fin or an oval rod for maximum strength. The completed Rod Holder is then meticulously polished to a mirror finish. These holders are designed primarily for storage but may be used for light tackle trolling. Specifications: Construction: Powder Coated Aluminum Diameter (Inches): 2.14" Finish: White Length (Inches): 10" Mounting Style: Rail Box Dimensions: 4"H x 9"W x 12"L WT: 1.9 lbs UPC: 096811520554

Read more less

Clamp-On Rod Holder - Black Aluminum - Horizontal Mount - Fits 1.315" O.D. PipeColor:BlackPipe Size:#2Fits:1.315" O.D. PipeMount:HorizontalJUST CLAMP THEM ON! Aluminum rod holders that are as beautiful as they are functional. With no hassle or wear and tear on your boat you can install these rod holders with only an Allen Wrench. No lengthy trips to the tower builder for custom installation at custom prices. Simply place the two halves of the clamp around the pipe, insert the bolts and tighten. Install them wherever you like. If later, you don't like the position, simply move them.These Rod Holders are the perfect solution for boats with wiring or hydraulic lines inside their tower legs. Now you can install Rod Holders on your Tower, Hard Top, T-Top, Radar Arch, Rails, Poling Platform or any structure made from standard size aluminum pipe.All Holders come lined with a heavy duty white vinyl insert. The Clamping portion of the Rod Holder is precision made for an exact fit. Four Marine Grade Stainless Bolts assure an even clamping pressure and a secure bond. The clamp is welded to the tube with either a fin or an oval rod for maximum strength. The completed Rod Holder is then meticulously polished to a mirror finish. These holders are designed primarily for storage but may be used for light tackle trolling. Specifications: Construction: Powder Coated Aluminum Diameter (Inches): 2.14" Finish: Black Length (Inches): 10" Mounting Style: Rail Box Dimensions: 4"H x 9"W x 12"L WT: 1.85 lbs UPC: 096811520233

Read more less

Clamp-On Rod Holder - White Aluminum - Horizontal Mount - Fits 1.050" O.D. PipeColor:WhitePipe Size:#1Fits:1.050" O.D. PipeMount:HorizontalJUST CLAMP THEM ON! Aluminum rod holders that are as beautiful as they are functional. With no hassle or wear and tear on your boat you can install these rod holders with only an Allen Wrench. No lengthy trips to the tower builder for custom installation at custom prices. Simply place the two halves of the clamp around the pipe, insert the bolts and tighten. Install them wherever you like. If later, you don't like the position, simply move them.These Rod Holders are the perfect solution for boats with wiring or hydraulic lines inside their tower legs. Now you can install Rod Holders on your Tower, Hard Top, T-Top, Radar Arch, Rails, Poling Platform or any structure made from standard size aluminum pipe.All Holders come lined with a heavy duty white vinyl insert. The Clamping portion of the Rod Holder is precision made for an exact fit. Four Marine Grade Stainless Bolts assure an even clamping pressure and a secure bond. The clamp is welded to the tube with either a fin or an oval rod for maximum strength. The completed Rod Holder is then meticulously polished to a mirror finish. These holders are designed primarily for storage but may be used for light tackle trolling. Specifications: Construction: Powder Coated Aluminum Diameter (Inches): 2.14" Finish: White Length (Inches): 10" Mounting Style: Rail Box Dimensions: 3"H x 9"W x 12"L WT: 1.6 lbs UPC: 096811520547

Read more less

Clamp-On Rod Holder - Black Aluminum - Horizontal Mount - Fits 1.050" O.D. PipeColor:BlackPipe Size:#1Fits:1.050" O.D. PipeMount:HorizontalJUST CLAMP THEM ON! Aluminum rod holders that are as beautiful as they are functional. With no hassle or wear and tear on your boat you can install these rod holders with only an Allen Wrench. No lengthy trips to the tower builder for custom installation at custom prices. Simply place the two halves of the clamp around the pipe, insert the bolts and tighten. Install them wherever you like. If later, you don't like the position, simply move them.These Rod Holders are the perfect solution for boats with wiring or hydraulic lines inside their tower legs. Now you can install Rod Holders on your Tower, Hard Top, T-Top, Radar Arch, Rails, Poling Platform or any structure made from standard size aluminum pipe.All Holders come lined with a heavy duty white vinyl insert. The Clamping portion of the Rod Holder is precision made for an exact fit. Four Marine Grade Stainless Bolts assure an even clamping pressure and a secure bond. The clamp is welded to the tube with either a fin or an oval rod for maximum strength. The completed Rod Holder is then meticulously polished to a mirror finish. These holders are designed primarily for storage but may be used for light tackle trolling. Specifications: Construction: Powder Coated Aluminum Diameter (Inches): 2.14" Finish: Black Length (Inches): 10" Mounting Style: Rail Box Dimensions: 4"H x 9"W x 13"L WT: 1.75 lbs UPC: 096811520134

Read more less

Clamp-On Rod Holder - White Aluminum - Vertical Mount - Fits 2.375" O.D. PipeColor:WhitePipe Size:#5Fits:2.375" O.D. PipeMount:VerticalJUST CLAMP THEM ON! Aluminum rod holders that are as beautiful as they are functional. With no hassle or wear and tear on your boat you can install these rod holders with only an Allen Wrench. No lengthy trips to the tower builder for custom installation at custom prices. Simply place the two halves of the clamp around the pipe, insert the bolts and tighten. Install them wherever you like. If later, you don't like the position, simply move them.These Rod Holders are the perfect solution for boats with wiring or hydraulic lines inside their tower legs. Now you can install Rod Holders on your Tower, Hard Top, T-Top, Radar Arch, Rails, Poling Platform or any structure made from standard size aluminum pipe.All Holders come lined with a heavy duty white vinyl insert. The Clamping portion of the Rod Holder is precision made for an exact fit. Four Marine Grade Stainless Bolts assure an even clamping pressure and a secure bond. The clamp is welded to the tube with either a fin or an oval rod for maximum strength. The completed Rod Holder is then meticulously polished to a mirror finish. These holders are designed primarily for storage but may be used for light tackle trolling. Specifications: Construction: Powder Coated Aluminum Diameter (Inches): 2.14" Finish: White Length (Inches): 10" Mounting Style: Rail Box Dimensions: 4"H x 9"W x 12"L WT: 2 lbs

Read more less

Clamp-On Rod Holder - Black Aluminum - Vertical Mount - Fits 2.375" O.D. PipeColor:BlackPipe Size:#5Fits:2.375" O.D. PipeMount:VerticalJUST CLAMP THEM ON! Aluminum rod holders that are as beautiful as they are functional. With no hassle or wear and tear on your boat you can install these rod holders with only an Allen Wrench. No lengthy trips to the tower builder for custom installation at custom prices. Simply place the two halves of the clamp around the pipe, insert the bolts and tighten. Install them wherever you like. If later, you don't like the position, simply move them.These Rod Holders are the perfect solution for boats with wiring or hydraulic lines inside their tower legs. Now you can install Rod Holders on your Tower, Hard Top, T-Top, Radar Arch, Rails, Poling Platform or any structure made from standard size aluminum pipe.All Holders come lined with a heavy duty white vinyl insert. The Clamping portion of the Rod Holder is precision made for an exact fit. Four Marine Grade Stainless Bolts assure an even clamping pressure and a secure bond. The clamp is welded to the tube with either a fin or an oval rod for maximum strength. The completed Rod Holder is then meticulously polished to a mirror finish. These holders are designed primarily for storage but may be used for light tackle trolling. Specifications: Construction: Powder Coated Aluminum Diameter (Inches): 2.14" Finish: Black Length (Inches): 10" Mounting Style: Rail Box Dimensions: 4"H x 9"W x 12"L WT: 1.8 lbs UPC: 096811500587

Read more less

Clamp-On Rod Holder - Black Aluminum - Vertical Mount - Fits 1.660 O.D. PipeColor: BlackPipe Size: #3Fits: 1.660" O.D. PipeMount: VerticalJUST CLAMP THEM ON! Aluminum rod holders that are as beautiful as they are functional. With no hassle or wear and tear on your boat you can install these rod holders with only an Allen Wrench. No lengthy trips to the tower builder for custom installation at custom prices. Simply place the two halves of the clamp around the pipe, insert the bolts and tighten. Install them wherever you like. If later, you don't like the position, simply move them.These Rod Holders are the perfect solution for boats with wiring or hydraulic lines inside their tower legs. Now you can install Rod Holders on your Tower, Hard Top, T-Top, Radar Arch, Rails, Poling Platform or any structure made from standard size aluminum pipe.All Holders come lined with a heavy duty white vinyl insert. The Clamping portion of the Rod Holder is precision made for an exact fit. Four Marine Grade Stainless Bolts assure an even clamping pressure and a secure bond. The clamp is welded to the tube with either a fin or an oval rod for maximum strength. The completed Rod Holder is then meticulously polished to a mirror finish. These holders are designed primarily for storage but may be used for light tackle trolling. Specifications: Construction: Powder Coated Aluminum Diameter (Inches): 2.14" Finish: Black Length (Inches): 10" Mounting Style: Rail Box Dimensions: 4"H x 10"W x 12"L WT: 1.6 lbs UPC: 096811500334 Quick Guide (pdf)

Read more less

Clamp-On Rod Holder - Black Aluminum - Vertical Mount - Fits 1.050 O.D. PipeColor: BlackPipe Size:#1Fits:1.050" O.D. PipeMount: VerticalJUST CLAMP THEM ON! Aluminum rod holders that are as beautiful as they are functional. With no hassle or wear and tear on your boat you can install these rod holders with only an Allen Wrench. No lengthy trips to the tower builder for custom installation at custom prices. Simply place the two halves of the clamp around the pipe, insert the bolts and tighten. Install them wherever you like. If later, you don't like the position, simply move them.These Rod Holders are the perfect solution for boats with wiring or hydraulic lines inside their tower legs. Now you can install Rod Holders on your Tower, Hard Top, T-Top, Radar Arch, Rails, Poling Platform or any structure made from standard size aluminum pipe.All Holders come lined with a heavy duty white vinyl insert. The Clamping portion of the Rod Holder is precision made for an exact fit. Four Marine Grade Stainless Bolts assure an even clamping pressure and a secure bond. The clamp is welded to the tube with either a fin or an oval rod for maximum strength. The completed Rod Holder is then meticulously polished to a mirror finish. These holders are designed primarily for storage but may be used for light tackle trolling. Specifications: Construction: Powder Coated Aluminum Diameter (Inches): 2.14" Finish: Black Length (Inches): 10" Mounting Style: Rail Box Dimensions: 4"H x 9"W x 12"L WT: 1.7 lbs UPC: 096811500136 Quick Guide (pdf)

Read more less

Rod Storage SystemsSingle Rod Rack SetsAnodized Finish: Bright BlackSimple and efficient rod storage. Constructed of Marine Grade AnodizedAluminum with a variety of Anodized Finishes. Rod Butt is inserted intoClosed End of set. Vinyl insert protects the Rod Butt. Tip of rod is placedinto Locking End of set and Nylon Locking Ring is rotated to lock it in.Will support the heaviest of rods. Can be mounted Horizontally, Verticallyor Overhead.

Read more less

Vinyl Rubber InsertsClamp-On Rod Holder Rubber InsertsOutside diameter is about 1-7/8” or (1.902”) inches.Inside diameter is about 1-5/8” inches.Overall length is 7-1/2” inches

Read more less

Swivel Base Flush Mount Rod HolderMedium, 15 Degree, Stainless SteelWithout a doubt, our swivel base rod holder is the "Ultimate Rod Holder" for the serious sportsman. Primarily designed to be used with bent butt tackle, the rod holders unique swivel base allows the rod butt to rotate in the rod holder when side pressure is applied to the tip of the rod. This is an indispensable tool, especially important in Giant Blue Fin Tuna fishing, where reel drags in the neighborhood of 60 pounds are frequently used and can result in tremendous forces being applied to the rod holder pin. Not only does this make sheared rod holder pins a thing of the past but, more importantly, it allows the tip of the rod to follow the fish. This reduces the possibility of line fraying and enhanced drag as the line streams sideways out of the roller tip instead of over the roller. The rod is also more easily removed from the holder since it is not locked on a rigid pin. The swivel base holder functions as a standard rod holder when used with straight butt rods. Straight butt rods can be manually rotated so that the line remains on the tip's roller. The amount of torque required to rotate the swivel is set by adjusting the pressure on two nylon drag washers with a half inch stainless steel lock nut at the bottom of the rod holder. Specifications: Angle: 15 Degrees Construction: Stainless Steel Diameter (Inches): 2" Finish: Polished Length (Inches): 9" Mounting Style: Flush Box Dimensions: 5"H x 6"W x 15"L WT: 2 lbs UPC: 096811530737

Read more less