
-
JL Audio JL Audio MHD Marine Amplifier 5-Channel Full-Range 900 Watts 24v
JL Audio MHD Marine Amplifier 5-Channel Full-Range 900 Watts 24v98229Model: MHD900/5-24VFor 24V systems only: 5-Channel Class D Marine System Amplifier, 100 W x 4 + 500 W x 1Thanks to its ability to act as a "one-box solution", the MHD900/5-24V is ideal for installations where space is at a premium and sound quality is the paramount goal.While extremely compact, this amazing amplifier will comfortably drive a complete high-performance marine audio system: that is, four satellite speaker systems and a subwoofer system... with a very serious 900 watts of power!Using our Single Cycle Control switching design and R.I.P.S technology, the MHD900/5-24V delivers 100 W x 4 to its four main channels, plus a very meaty 500W to its subwoofer channel. Thanks to R.I.P.S., high power can be delivered over a wide range of load impedances, while the tight power supply regulation keeps distortion down, maximizing sound quality.This marine amplifier features white and gray powder-coat finishes, a gasketed cover for the controls and stainless steel hardware for durability in the marine environment.This amplifier is designed for operation in vessels with 24 volt, negative-ground electrical systems. Use of this product in vessels with positive ground and/or voltages other than 24 V may result in damage to the product and will void the warranty.USA Limited Warranty: Two (2) years from the original date of purchase.Specifications Rated Continuous (RMS) Power @ 28.8 V Main Channels @ 4 ohms 100 W RMS x 4 Main Channels @ 3 ohms 75 W RMS x 4 Main Channels @ 2 ohms 75 W RMS x 4 Main Channels @ 1.5 ohms 75 W RMS x 4 Main Channels - Bridged @ 8 ohms 200 W RMS x 2 Main Channels - Bridged @ 4 ohms 150 W RMS x 2 Subwoofer Channel @ 4 ohms 500 W RMS x 1 Subwoofer Channel @ 3 ohms 500 W RMS x 1 Subwoofer Channel @ 2 ohms 500 W RMS x 1 Subwoofer Channel @ 1.5 ohms 500 W RMS x 1 Rated Continuous (RMS) Power @ 25 V Main Channels @ 4 ohms 100 W RMS x 4 Main Channels @ 3 ohms 75 W RMS x 4 Main Channels @ 2 ohms 75 W RMS x 4 Main Channels @ 1.5 ohms 75 W RMS x 4 Main Channels - Bridged @ 8 ohms 200 W RMS x 2 Main Channels - Bridged @ 4 ohms 150 W RMS x 2 Subwoofer Channel @ 4 ohms 500 W RMS x 1 Subwoofer Channel @ 3 ohms 500 W RMS x 1 Subwoofer Channel @ 2 ohms 500 W RMS x 1 Subwoofer Channel @ 1.5 ohms 500 W RMS x 1 General Specifications Frequency Response (Main Channels) 12 Hz - 28 kHz (+0, -1dB) Frequency Response (Subwoofer Channel) 12 Hz - 10 kHz (+0, -1dB) S/N Ratio, referred to highest rated power (Main Channels) >108.5 dB below rated power (A-weighted, 20 Hz - 20 kHz noise bandwidth) S/N Ratio, referred to 1 W (Main Channels) >88.2 dB (A-weighted, 20 Hz - 20 kHz noise bandwidth) Damping Factor @ 4 ohms >400 / 50 Hz Damping Factor @ 2 ohms >200 / 50 Hz THD+N @ Rated Power (Main Channels) <0.03% @ 4 ohms THD+N @ Rated Power (Subwoofer Channel) <0.05% @ ohms Input Voltage Range @ RCA Inputs Switchable from 200 mV - 2 V RMS (Low) to 800 mV - 8 V RMS (High) Min.Copper Power / Ground Wire Gauge Accepts up to 4 AWG wire Fuse Rating 30 A (AFS, AGU or MaxiFuse™) Signal Processing Filter Mode(s): Channels 1 & 2 (front) High-Pass only Filter Slope(s): Channels 1 & 2 (front) 12/24 dB/octave Filter Frequency Range: Channels 1 & 2 (front) 50 Hz - 500 Hz Filter Mode(s): Channels 3 & 4 (rear) High-Pass only Filter Slope(s): Channels 3 & 4 (rear) 12/24 dB/octave Filter Frequency Range: Channels 3 & 4 50 Hz - 500 Hz Filter Mode(s): Subwoofer Channel Low-Pass only Filter Slope(s): Subwoofer Channel 12/24 dB/octave Filter Frequency Range: Subwoofer Channel 50 Hz - 500 Hz Detented, Calibrated Filter Freq. Potentiometers Yes Filter Defeat Function Yes Infrasonic Filter: Subwoofer Channel 30 Hz, Defeatable Remote Level Control Optional (HD-RLC) Remote Level Modes Sub Ch. Only Channel Input Mode Switch Yes (2/4/6 ch.) Pass-Through Preamp Output None Source Channel Selection for PreOuts N/A Physical Specifications Height 1.93 in / 49 mm Width 10.74 in / 273 mm Depth 7.85 in / 199 mm Net Weight 6.85 lb / 3.11 kg
$1,649.99
-
JL Audio JL Audio MVi Marine Amplifier 8 Channel Full-Range 800 Watts 12v Integrated DSP
JL Audio MVi Marine Amplifier 8 Channel Full-Range 800 Watts 12v Integrated DSP98649Model: MV800/8i8-Channel Class D Full-Range Marine Amplifier with Integrated DSP, 100 W x 8 @ 2 ohms / 75 W x 8 @ 4 ohms- 14.4VEngineered to deliver reference-grade audio performance in marine environments, every MVi amplifier unites our cutting-edge NexD2™ switching amplifier technology with an integrated, full-featured digital signal processor.Outfitted with our second-generation NexD2™ technology, the MV800/8i produces up to 75 watts per channel into 4 ohms, or 100 watts into 2 ohms. It can also be bridged into 4 ohms, generating up to 200 W x 4.The NexD2™ full-range technology in this amplifier is DSP-controlled and features a reduced loop area design utilizing DirectFET™ outputs for outstanding fidelity, very low noise and exceptional efficiency. Housed in a compact, cast alloy chassis with marine-grade powder coat finish, the MV800/8i is outfitted with corrosion-resistant hardware and connectors.Instead of traditional control knobs and switches, all amplifier adjustments and DSP functionality are configured via a compatible external device (PC, Tablet or Smartphone), with the appropriate JL Audio TüN® Software application installed.USA Limited Warranty: Two (2) years from the original date of purchase.Specifications Rated Continuous (RMS) Power @ 14.4 V @ 4 ohms 75 W RMS x 8 @ 2 ohms 100 W RMS x 8 Bridged @ 4 ohms 200 W RMS x 4 Rated Continuous (RMS) Power @ 12.5 V @ 4 ohms 60 W RMS x 8 @ 2 ohms 90 W RMS x 8 Bridged @ 4 ohms 180 W RMS x 4 General Specifications Frequency Response 12 Hz - 21 kHz (+0, -1dB) S/N Ratio, referred to highest rated power (Analog Inputs) 99 dB (A-weighted, 20 Hz - 20 kHz noise bandwidth) S/N Ratio, referred to 1 W (Analog Inputs) 80 dB (A-weighted, 20 Hz - 20 kHz noise bandwidth) Damping Factor @ 4 ohms >100 / 50 Hz Damping Factor @ 2 ohms >50 / 50 Hz THD+N @ Rated Power <1% @ ohms per Ch. Input Voltage Range @ RCA Inputs 250 mV - 16 V RMS Min.Copper Power / Ground Wire Gauge 4 AWG wire Fuse Rating 80 A (AFS, AGU or MaxiFuse™) IP Rating IPX2 (when mounted vertically with connections pointed downward) Physical Specifications Height 2.05 in / 52 mm Width 13.96 in / 355 mm Depth 6.93 in / 176 mm Net Weight 5.6 lb / 2.54 kg What's in the Box: MV800/8i Amplifier Power Connector (for 2 AWG wire) Speaker Output Harnesses (4) 6 ft A/B USB Cable
$1,599.99
-
JL Audio JL Audio MHD Marine Amplifier 5-Channel Full-Range 900 Watts 12v
JL Audio MHD Marine Amplifier 5-Channel Full-Range 900 Watts 12v98226Model: MHD900/55-Channel Class D Marine System Amplifier, 100 W x 4 + 500 W x 1Thanks to its ability to act as a "one-box solution", the MHD900/5 is ideal for installations where space is at a premium and sound quality is the paramount goal.While extremely compact, this amazing amplifier will comfortably drive a complete high-performance marine audio system: that is, four satellite speaker systems and a subwoofer system... with a very serious 900 watts of power!Using our Single Cycle Control switching design and R.I.P.S technology, the MHD900/5 delivers 100 W x 4 to its four main channels, plus a very meaty 500W to its subwoofer channel. Thanks to R.I.P.S., high power can be delivered over a wide range of load impedances, while the tight power supply regulation keeps distortion down, maximizing sound quality.This marine amplifier features white and gray powder-coat finishes, a gasketed cover for the controls and stainless steel hardware for durability in the marine environment.USA Limited Warranty: Two (2) years from the original date of purchase.Specifications Rated Continuous (RMS) Power @ 14.4 V Main Channels @ 4 ohms 100 W RMS x 4 Main Channels @ 3 ohms 75 W RMS x 4 Main Channels @ 2 ohms 75 W RMS x 4 Main Channels @ 1.5 ohms 75 W RMS x 4 Main Channels - Bridged @ 8 ohms 200 W RMS x 2 Main Channels - Bridged @ 4 ohms 150 W RMS x 2 Subwoofer Channel @ 4 ohms 500 W RMS x 1 Subwoofer Channel @ 3 ohms 500 W RMS x 1 Subwoofer Channel @ 2 ohms 500 W RMS x 1 Subwoofer Channel @ 1.5 ohms 500 W RMS x 1 Rated Continuous (RMS) Power @ 12.5 V Main Channels @ 4 ohms 100 W RMS x 4 Main Channels @ 3 ohms 75 W RMS x 4 Main Channels @ 2 ohms 75 W RMS x 4 Main Channels @ 1.5 oms 75 W RMS x 4 Main Channels - Bridged @ 8 ohms 200 W RMS x 2 Main Channels - Bridged @ 4 ohms 150 W RMS x 2 Subwoofer Channel @ 4 ohms 500 W RMS x 1 Subwoofer Channel @ 3 ohms 500 W RMS x 1 Subwoofer Channel @ 2 ohms 500 W RMS x 1 Subwoofer Channel @ 1.5 ohms 500 W RMS x 1 General Specifications Frequency Response (Main Channels) 12 Hz - 28 kHz (+0, -1dB) Frequency Response (Subwoofer Channel) 12 Hz - 10 kHz (+0, -1dB) S/N Ratio, referred to highest rated power (Main Channels) >108.5 dB below rated power (A-weighted, 20 Hz - 20 kHz noise bandwidth) S/N Ratio, referred to 1 W (Main Channels) >88.2 dB (A-weighted, 20 Hz - 20 kHz noise bandwidth) Damping Factor @ 4 ohms >400 / 50 Hz Damping Factor @ 2 ohms >200 / 50 Hz THD+N @ Rated Power (Main Channels) <0.03% @ 4 ohms THD+N @ Rated Power (Subwoofer Channel) <0.05% @ 4 ohms Input Voltage Range @ RCA Inputs Switchable from 200 mV - 2 V RMS (Low) to 800 mV - 8 V RMS (High) Min.Copper Power / Ground Wire Gauge Accepts up to 4 AWG wire Fuse Rating 60 A (AFS, AGU or MaxiFuse™) Signal Processing Filter Mode(s): Channels 1 & 2 (front) High-Pass only Filter Slope(s): Channels 1 & 2 (front) 12/24 dB/octave Filter Frequency Range: Channels 1 & 2 (front) 50 Hz - 500 Hz Filter Mode(s): Channels 3 & 4 (rear) High-Pass only Filter Slope(s): Channels 3 & 4 (rear) 12/24 dB/octave Filter Frequency Range: Channels 3 & 4 50 Hz - 500 Hz Filter Mode(s): Subwoofer Channel Low-Pass only Filter Slope(s): Subwoofer Channel 12/24 dB/octave Filter Frequency Range: Subwoofer Channel 50 Hz - 500 Hz Detented, Calibrated Filter Freq. Potentiometers Yes Filter Defeat Function Yes Infrasonic Filter: Subwoofer Channel 30 Hz, Defeatable Remote Level Control Optional (HD-RLC) Remote Level Modes Sub Ch. Only Channel Input Mode Switch Yes (2/4/6 ch.) Pass-Through Preamp Output None Source Channel Selection for PreOuts N/A Physical Specifications Height 1.93 in / 49 mm Width 10.74 in / 273 mm Depth 7.85 in / 199 mm Net Weight 6.85 lb / 3.11 kg
$1,599.99
-
JL Audio JL Audio M6 8.8in Enclosed Tower Speakers Titanium Sport Grill with RGB LED
JL Audio M6 8.8in Enclosed Tower Speakers Titanium Sport Grill with RGB LED93663Model: M6-880ETXv3-Sb-S-GmTi-iM6 8.8-inch Marine Enclosed Coaxial Speaker System with Transflective™ LED Lighting (125 W, 4 ohms) - Satin Black Enclosure, Gray Metallic Trim Ring, Titanium Sport GrilleEnclosed in these beautiful, injection-molded enclosures are our maximum-performance, oversized M6 8.8-inch coaxial tower speakers, delivering clean, loud audio that can be heard well beyond the boat when mounted up high.The huge woofer cone area advantage offers greater efficiency and bass output, which is complemented by the clear, smooth sound of an oversized 1.25-inch silk dome tweeter. These enclosures feature a decorative, aluminum logo cap on the end opposite the speaker, which can be oriented to match any custom mounting application. Each is designed to mate with one of our mounting fixtures (sold separately, and available to fit a wide range of applications). The speaker cables exit through the center of the fixtures, staying high and dry, and out of sight. The patent-pending Transflective™ RGB LED technology emits a smooth lighting effect through the woofer cone, with a choice of several lighting colors. Add an optional RGB controller to create thousands of color variations. Professional installation is strongly recommended.For best results, we recommend powering these systems with an amplifier in the 50-250 W per channel range.Like all JL Audio marine speakers, this system is built to withstand a real saltwater marine environment and deliver years of listening enjoyment.Production of all M6 loudspeakers takes place in JL Audio’s Miramar, Florida factory, using global components and materials.Sold as a pair.Mounting Clamps Required (Sold Separately)USA Limited Warranty: Two (2) years from the original date of purchase.Specifications General Specifications System Nominal Impedance 4 ohms System Frequency Response 38 Hz - 20 KHz ± 3 dB System Efficiency 90.5 dB @ 1 W / 1 m Continuous Power Handling (RMS) 125 W Recommended Amplifier Power (RMS) 50 - 250 W / Ch Physical Specifications Enclosure Diameter 8.80 in / 224 mm Enclosure Depth 14.80 in / 376 mm Height including Mounting Clamp Receiver* 9.67 in / 246 mm Mounting Clamp Receiver / Enclosure Offset 0.87 in / 22 mm *Mounting Clamps Required (Sold Separately)
$1,579.99
-
JL Audio JL Audio M6 8.8in Enclosed Tower Speakers White Sport Grill with RGB LED
JL Audio M6 8.8in Enclosed Tower Speakers White Sport Grill with RGB LED93665Model: M6-880ETXv3-Gw-S-GwGw-iM6 8.8-inch Marine Enclosed Coaxial Speaker System with Transflective™ LED Lighting (125 W, 4 ohms) - Gloss White Enclosure, Gloss White Trim Ring, Gloss White Sport GrilleEnclosed in these beautiful, injection-molded enclosures are our maximum-performance, oversized M6 8.8-inch coaxial tower speakers, delivering clean, loud audio that can be heard well beyond the boat when mounted up high.The huge woofer cone area advantage offers greater efficiency and bass output, which is complemented by the clear, smooth sound of an oversized 1.25-inch silk dome tweeter. These enclosures feature a decorative, aluminum logo cap on the end opposite the speaker, which can be oriented to match any custom mounting application. Each is designed to mate with one of our mounting fixtures (sold separately, and available to fit a wide range of applications). The speaker cables exit through the center of the fixtures, staying high and dry, and out of sight. The patent-pending Transflective™ RGB LED technology emits a smooth lighting effect through the woofer cone, with a choice of several lighting colors. Add an optional RGB controller to create thousands of color variations. Professional installation is strongly recommended.For best results, we recommend powering these systems with an amplifier in the 50-250 W per channel range.Like all JL Audio marine speakers, this system is built to withstand a real saltwater marine environment and deliver years of listening enjoyment.Production of all M6 loudspeakers takes place in JL Audio’s Miramar, Florida factory, using global components and materials.Sold as a pair.Mounting Clamps Required (Sold Separately)USA Limited Warranty: Two (2) years from the original date of purchase.Specifications General Specifications System Nominal Impedance 4 ohms System Frequency Response 38 Hz - 20 KHz ± 3 dB System Efficiency 90.5 dB @ 1 W / 1 m Continuous Power Handling (RMS) 125 W Recommended Amplifier Power (RMS) 50 - 250 W / Ch. Physical Specifications Enclosure Diameter 8.80 in / 224 mm Enclosure Depth 14.80 in / 376 mm Height including Mounting Clamp Receiver* 9.67 in / 246 mm Mounting Clamp Receiver / Enclosure Offset 0.87 in / 22 mm *Mounting Clamps Required (Sold Separately)
$1,549.99
-
JL Audio JL Audio M6 8.8in Enclosed Tower Speakers Titanium Sport Grill
JL Audio M6 8.8in Enclosed Tower Speakers Titanium Sport Grill93666Model: M6-880ETXv3-Sb-S-GmTiM6 8.8-inch Marine Enclosed Coaxial Speaker System with Transflective™ LED Lighting (125 W, 4 ohms) - Satin Black Enclosure, Gray Metallic Trim Ring, Titanium Sport GrilleEnclosed in these beautiful, injection-molded enclosures are our maximum-performance, oversized M6 8.8-inch coaxial tower speakers, delivering clean, loud audio that can be heard well beyond the boat when mounted up high.The huge woofer cone area advantage offers greater efficiency and bass output, which is complemented by the clear, smooth sound of an oversized 1.25-inch silk dome tweeter. These enclosures feature a decorative, aluminum logo cap on the end opposite the speaker, which can be oriented to match any custom mounting application. Each is designed to mate with one of our mounting fixtures (sold separately, and available to fit a wide range of applications). The speaker cables exit through the center of the fixtures, staying high and dry, and out of sight. The patent-pending Transflective™ RGB LED technology emits a smooth lighting effect through the woofer cone, with a choice of several lighting colors. Add an optional RGB controller to create thousands of color variations. Professional installation is strongly recommended.For best results, we recommend powering these systems with an amplifier in the 50-250 W per channel range.Like all JL Audio marine speakers, this system is built to withstand a real saltwater marine environment and deliver years of listening enjoyment.Production of all M6 loudspeakers takes place in JL Audio’s Miramar, Florida factory, using global components and materials.Sold as a pair.Mounting Clamps Required (Sold Separately)USA Limited Warranty: Two (2) years from the original date of purchase.Specifications General Specifications System Nominal Impedance 4 ohms System Frequency Response 38 Hz - 20 KHz ± 3 dB System Efficiency 90.5 dB @ 1 W / 1 m Continuous Power Handling (RMS) 125 W Recommended Amplifier Power (RMS) 50 - 250 W / Ch. Physical Specifications Enclosure Diameter 8.80 in / 224 mm Enclosure Depth 14.80 in / 376 mm Height including Mounting Clamp Receiver* 9.67 in / 246 mm Mounting Clamp Receiver / Enclosure Offset 0.87 in / 22 mm *Mounting Clamps Required (Sold Separately)
$1,529.99
-
JL Audio JL Audio MVi Marine Amplifier 5 Channel Full-Range 1000 Watts 12v Integrated DSP
JL Audio MVi Marine Amplifier 5 Channel Full-Range 1000 Watts 12v Integrated DSP98651Model: MV1000/5i5-Channel Class D Marine System Amplifier with Integrated DSP, 100 W x 4 @ 2 ohms + 600 W x 1 @ 2 ohms - 14.4VEngineered to deliver reference-grade audio performance in marine environments, every MVi amplifier unites our cutting-edge NexD2™ switching amplifier technology with an integrated, full-featured digital signal processor.Equipped with our second-generation NexD2™ technology, the MV1000/5i is capable of powering a complete marine audio system. It can drive four main speakers with 75 W x 4 @ 4 ohms, while also powering a subwoofer with up to 600W @ 2 ohms. Bridging the main channels transforms it into a very powerful, 3-channel system amplifier with up to 200W x 2 @ 4 ohms on the main channels and 600W @ 2 ohms on the subwoofer channel.The NexD2™ full-range technology in the main channels of this amplifier is DSP-controlled and features a reduced loop area design utilizing DirectFET™ outputs for outstanding fidelity, very low noise and exceptional efficiency. The subwoofer channel features an optimized low-frequency variant of the NexD2™ technology. The amplifier chassis is a ultra-compact, cast alloy design with marine-grade powder coat finish and corrosion-resistant hardware.Instead of traditional control knobs and switches, all amplifier adjustments and DSP functionality are configured via a compatible external device (PC, Tablet or Smartphone), with the appropriate JL Audio TüN® Software application installed.USA Limited Warranty: Two (2) years from the original date of purchase.Specifications Rated Continuous (RMS) Power @ 14.4 V Main Channels @ 4 ohms 75 W RMS x 4 Main Channels @ 2 ohms 100 W RMS x 4 Main Channels - Bridged @ 4 ohms 200 W RMS x 2 Subwoofer Channel @ 4 ohms 400 W RMS x 1 Subwoofer Channel @ 3 ohms 500 W RMS x 1 Subwoofer Channel @ 2 ohms 600 W RMS x 1 Subwoofer Channel @ 1.5 ohms N/A Rated Continuous (RMS) Power @ 12.5 V Main Channels @ 4 ohms 60 W RMS x 4 Main Channels @ 2 ohms 90 W RMS x 4 Main Channels - Bridged @ 4 ohms 180 W RMS x 2 Subwoofer Channel @ 4 ohms 360 W RMS x 1 Subwoofer Channel @ 3 ohms 480 W RMS x 1 Subwoofer Channel @ 2 ohms 600 W RMS x 1 Subwoofer Channel @ 1.5 ohms N/A General Specifications Frequency Response (Main Channels) 12 Hz - 24 kHz (+0, -1dB) S/N Ratio, referred to highest rated power (Analog Inputs - Main Channels) 99 dB (A-weighted, 20 Hz - 20 kHz noise bandwidth) S/N Ratio, referred to highest rated power (Analog Inputs - Subwoofer Channel) 99 dB (A-weighted, 20 Hz - 20 kHz noise bandwidth) S/N Ratio, referred to 1 W (Analog Inputs - Main Channels) 80 dB (A-weighted, 20 Hz - 20 kHz noise bandwidth) S/N Ratio, referred to 1 W (Analog Inputs - Subwoofer Channel) 72 dB (A-weighted, 20 Hz - 20 kHz noise bandwidth) Damping Factor @ 2 ohms >50 / 50 Hz Damping Factor @ 4 ohms >150 / 50 Hz THD+N @ Rated Power (Main Channels) <1% @ 2 ohms per Ch. THD+N @ Rated Power (Subwoofer Channels) <1% @ 2 ohms per Ch. Input Voltage Range @ RCA Inputs 250 mV - 16 V RMS Min.Copper Power / Ground Wire Gauge 4 AWG wire Fuse Rating 80 A (AFS, AGU or MaxiFuse™) Physical Specifications Height 2.05 in / 52 mm Width 13.96 in / 355 mm Depth 6.93 in / 176 mm Net Weight 5.6 lb / 2.54 kg What's in the Box: MV1000/5i Amplifier Power Connector (for 4 AWG wire) Speaker Output Harnesses (2) Subwoofer Output Harness 6 ft A/B USB Cable
$1,499.99
-
JL Audio JL Audio M6 8.8in Enclosed Tower Speakers White Classic Grille
JL Audio M6 8.8in Enclosed Tower Speakers White Classic Grille93691Model: M6-880ETXv3-Gw-C-3GwM6 8.8-inch Marine Enclosed Coaxial Speaker System (125 W, 4 ohms) - Gloss White Enclosure, Gloss White Trim Ring, Gloss White Classic Grille, White Tweeter MeshEnclosed in these beautiful, injection-molded enclosures are our maximum-performance, oversized M6 8.8-inch coaxial tower speakers, delivering clean, loud audio that can be heard well beyond the boat when mounted up high.The huge woofer cone area advantage offers greater efficiency and bass output, which is complemented by the clear, smooth sound of an oversized 1.25-inch silk dome tweeter. These enclosures feature a decorative, aluminum logo cap on the end opposite the speaker, which can be oriented to match any custom mounting application. Each is designed to mate with one of our mounting fixtures (sold separately, and available to fit a wide range of applications). The speaker cables exit through the center of the fixtures, staying high and dry, and out of sight. Professional installation is strongly recommended.For best results, we recommend powering these systems with an amplifier in the 50-250 W per channel range.Like all JL Audio marine speakers, this system is built to withstand a real saltwater marine environment and deliver years of listening enjoyment.Production of all M6 loudspeakers takes place in JL Audio’s Miramar, Florida factory, using global components and materials.Sold as a pair.Mounting Clamps Required (Sold Separately)USA Limited Warranty: Two (2) years from the original date of purchase.Specifications General Specifications System Nominal Impedance 4 ohms System Frequency Response 38 Hz - 20 KHz ± 3 dB System Efficiency 90.5 dB @ 1 W / 1 m Continuous Power Handling (RMS) 125 W Recommended Amplifier Power (RMS) 50 - 250 W / Ch. Physical Specifications Enclosure Diameter 8.80 in / 224 mm Enclosure Depth 14.73 in / 374 mm Height including Mounting Clamp Receiver* 9.67 in / 246 mm Mounting Clamp Receiver / Enclosure Offset 0.87 in / 22 mm *Mounting Clamps Required (Sold Separately)
$1,499.99
-
JL Audio JL Audio M6 8.8in Enclosed Tower Speakers White Sport Grill
JL Audio M6 8.8in Enclosed JL Audio M6 8.8in Enclosed GrillM6-880ETXv3-Gw-S-GwGw 93664Model: M6-880ETXv3-Gw-S-GwGwM6 8.8-inch Marine Enclosed Coaxial Speaker System (125 W, 4 ohms) - Gloss White Enclosure, Gloss White Trim Ring, Gloss White Sport GrilleEnclosed in these beautiful, injection-molded enclosures are our maximum-performance, oversized M6 8.8-inch coaxial tower speakers, delivering clean, loud audio that can be heard well beyond the boat when mounted up high.The huge woofer cone area advantage offers greater efficiency and bass output, which is complemented by the clear, smooth sound of an oversized 1.25-inch silk dome tweeter. These enclosures feature a decorative, aluminum logo cap on the end opposite the speaker, which can be oriented to match any custom mounting application. Each is designed to mate with one of our mounting fixtures (sold separately, and available to fit a wide range of applications). The speaker cables exit through the center of the fixtures, staying high and dry, and out of sight. Professional installation is strongly recommended.For best results, we recommend powering these systems with an amplifier in the 50-250 W per channel range.Like all JL Audio marine speakers, this system is built to withstand a real saltwater marine environment and deliver years of listening enjoyment.Production of all M6 loudspeakers takes place in JL Audio’s Miramar, Florida factory, using global components and materials.Sold as a pair.Mounting Clamps Required (Sold Separately)USA Limited Warranty: Two (2) years from the original date of purchaseSpecifications General Specifications System Nominal Impedance 4 ohms System Frequency Response 38 Hz - 20 KHz ± 3 dB System Efficiency 90.5 dB @ 1 W / 1 m Continuous Power Handling (RMS) 125 W Recommended Amplifier Power (RMS) 50 - 250 W / Ch. Physical Specifications Enclosure Diameter 8.80 in / 224 mm Enclosure Depth 14.80 in / 376 mm Height including Mounting Clamp Receiver* 9.67 in / 246 mm Mounting Clamp Receiver / Enclosure Offset 0.87 in / 22 mm *Mounting Clamps Required (Sold Separately)
$1,499.99
-
JL Audio JL Audio M6 8.8in Enclosed Tower Speakers White Classic Grille Black Tweeter
JL Audio M6 8.8in Enclosed Tower Speakers White Classic Grille Black TweeterM6-880ETXv3-Gw-C-GwGw 93661Model: M6-880ETXv3-Gw-C-GwGwM6 8.8-inch Marine Enclosed Coaxial Speaker System (125 W, 4 ohms) - Gloss White Enclosure, Gloss White Trim Ring, Gloss White Classic Grille, Black Tweeter MeshEnclosed in these beautiful, injection-molded enclosures are our maximum-performance, oversized M6 8.8-inch coaxial tower speakers, delivering clean, loud audio that can be heard well beyond the boat when mounted up high.The huge woofer cone area advantage offers greater efficiency and bass output, which is complemented by the clear, smooth sound of an oversized 1.25-inch silk dome tweeter. These enclosures feature a decorative, aluminum logo cap on the end opposite the speaker, which can be oriented to match any custom mounting application. Each is designed to mate with one of our mounting fixtures (sold separately, and available to fit a wide range of applications). The speaker cables exit through the center of the fixtures, staying high and dry, and out of sight. Professional installation is strongly recommended.For best results, we recommend powering these systems with an amplifier in the 50-250 W per channel range.Like all JL Audio marine speakers, this system is built to withstand a real saltwater marine environment and deliver years of listening enjoyment.Production of all M6 loudspeakers takes place in JL Audio’s Miramar, Florida factory, using global components and materials.Sold as a pair.Mounting Clamps Required (Sold Separately)USA Limited Warranty: Two (2) years from the original date of purchase.Specifications General Specifications System Nominal Impedance 4 ohms System Frequency Response 38 Hz - 20 KHz ± 3 dB System Efficiency 90.5 dB @ 1 W / 1 m Continuous Power Handling (RMS) 125 W Recommended Amplifier Power (RMS) 50 - 250 W / Ch. Physical Specifications Enclosure Diameter 8.80 in / 224 mm Enclosure Depth 14.73 in / 374 mm Height including Mounting Clamp Receiver* 9.67 in / 246 mm *Mounting Clamps Required (Sold Separately)
$1,499.99
-
JL Audio JL Audio MHD Marine Amplifier 4-Channel Full-Range 600 Watts 24v
JL Audio MHD Marine Amplifier 4-Channel Full-Range 600 Watts 24v98227Model: MHD600/4-24VFor 24V systems only: 4-Channel Class D Marine Full-Range Amplifier, 150 W x 4 @ 1.5-4 ohmsThis compact, multi-channel powerhouse employs our Single-Cycle Control switching design and R.I.P.S. technology to deliver 150 W x 4 or 300 W x 2. Tight power supply regulation keeps distortion down and maximizes sound quality.The MHD600/4-24V is the ideal satellite amplifier, delivering huge dynamics with pristine resolution. It can also be deployed, on its own, as a very capable 3-channel system amplifier with 150W x 2 to the satellites and 300W x 1 to a subwoofer system.This marine amplifier features white and gray powder-coat finishes, a gasketed cover for the controls and stainless steel hardware for durability in the marine environment.This amplifier is designed for operation in vessels with 24 volt, negative-ground electrical systems. Use of this product in vessels with positive ground and/or voltages other than 24 V may result in damage to the product and will void the warranty.USA Limited Warranty: Two (2) years from the original date of purchaseSpecifications Rated Continuous (RMS) Power @ 28.8 V @ 4 ohms 150 W RMS x 4 @ 3 ohms 150 W RMS x 4 @ 2 ohms 150 W RMS x 4 @ 1.5 ohms 150 W RMS x 4 Bridged @ 8 ohms 300 W RMS x 2 Bridged @ 4 ohms 300 W RMS x 2 Rated Continuous (RMS) Power @ 25 V @ 4 ohms 150 W RMS x 4 @ 3 ohms 150 W RMS x 4 @ 2 ohms 150 W RMS x 4 @ 1.5 ohms 150 W RMS x 4 Bridged @ 8 ohms 300 W RMS x 2 Bridged @ 4 ohms 300 W RMS x 2 General Specifications Frequency Response 6 Hz - 30 kHz (+0, -1dB) S/N Ratio, referred to highest rated power >110 dB (A-weighted, 20 Hz - 20 kHz noise bandwidth) S/N Ratio, referred to 1 W >88.2 dB (A-weighted, 20 Hz - 20 kHz noise bandwidth) Damping Factor @ 4 ohms >300 / 50 Hz Damping Factor @ 2 ohms >150 / 50 Hz THD+N @ Rated Power <0.03% @ 4 ohms per Ch. Input Voltage Range @ RCA Inputs Switchable from 200 mV - 2 V RMS to 800 mV - 8 V RMS Min.Copper Power / Ground Wire Gauge 4 AWG wire Fuse Rating 25 A (AFS, AGU or MaxiFuse™) Signal Processing Filter Mode(s) Low-Pass or High-Pass Filter Slope(s) 12/24 dB/octave Filter Frequency Range 50 Hz - 500 Hz Detented, Calibrated Filter Freq. Potentiometers Yes Filter Defeat Function Yes Remote Level Control Optional (HD-RLC) Remote Level Modes 2 or All Channels Channel Input Mode Switch Yes (2/4 ch.) Pass-Through Preamp Output Buffered Source Channel Selection for PreOuts Yes Physical Specifications Height 1.93 in / 49 mm Width 10.74 in / 273 mm Depth 7.85 in / 199 mm
$1,449.99
-
JL Audio JL Audio MVi Marine Amplifier 6 Channel Full-Range 600 Watts 12v Integrated DSP
JL Audio MVi Marine Amplifier 6 Channel Full-Range 600 Watts 12v Integrated DSP98648Model: MV600/6i6-Channel Class D Full-Range Marine Amplifier with Integrated DSP, 100 W x 6 @ 2 ohms / 75 W x 6 @ 4 ohms - 14.4VEngineered to deliver reference-grade audio performance in marine environments, every MVi amplifier unites our cutting-edge NexD2™ switching amplifier technology with an integrated, full-featured digital signal processor.Outfitted with our second-generation NexD2™ technology, the MV400/4i produces up to 75 watts per channel into 4 ohms, or 100 watts into 2 ohms. It can also be bridged into 4 ohms, generating up to 200 W x 3.The NexD2™ full-range technology in this amplifier is DSP-controlled and features a reduced loop area design utilizing DirectFET™ outputs for outstanding fidelity, very low noise and exceptional efficiency. Housed in a compact, cast alloy chassis with marine-grade powder coat finish, the MV600/6i is outfitted with corrosion-resistant hardware and connectors..Instead of traditional control knobs and switches, all amplifier adjustments and DSP functionality are configured via a compatible external device (PC, Tablet or Smartphone), with the appropriate JL Audio TüN® Software application installed.USA Limited Warranty: Two (2) years from the original date of purchase.Specifications Rated Continuous (RMS) Power @ 14.4 V @ 4 ohms 75 W RMS x 6 @ 2 ohms 100 W RMS x 6 Bridged @ 4 ohms 200 W RMS x 3 Rated Continuous (RMS) Power @ 12.5 V @ 4 ohms 60 W RMS x 6 @ 2 ohms 90 W RMS x 6 Bridged @ 4 ohms 180 W RMS x 3 General Specifications Frequency Response 12 Hz - 24 kHz (+0, -1dB) S/N Ratio, referred to highest rated power (Analog Inputs) 99 dB (A-weighted, 20 Hz - 20 kHz noise bandwidth) S/N Ratio, referred to 1 W (Analog Inputs) 80 dB (A-weighted, 20 Hz - 20 kHz noise bandwidth) Damping Factor @ 4 ohms >100 / 50 Hz Damping Factor @ 2 ohms >50 / 50 Hz THD+N @ Rated Power <1% @ ohms per Ch. Input Voltage Range @ RCA Inputs 250 mV - 16 V RMS Min.Copper Power / Ground Wire Gauge 4 AWG wire Fuse Rating 50 A (AFS, AGU or MaxiFuse™) IP Rating IPX2 (when mounted vertically with connections pointed downward) Physical Specifications Height 2.05 in / 52 mm Width 13.96 in / 355 mm Depth 6.93 in / 176 mm Net Weight 5.6 lb / 2.54 kg What's in the Box: MV600/6i Amplifier Power Connector (for 4 AWG wire) Speaker Output Harnesses (3) 6 ft A/B USB Cable
$1,399.99
-
JL Audio JL Audio MHD Marine Amplifier 4-Channel Full-Range 600 Watts 12v
JL Audio MHD Marine Amplifier 4-Channel Full-Range 600 Watts 12v98224Model: MHD600/44-Channel Class D Marine Full-Range Amplifier, 150 W x 4 @ 1.5-4 ohmsThis compact, multi-channel powerhouse employs our Single-Cycle Control switching design and R.I.P.S. technology to deliver 150 W x 4 or 300 W x 2. Tight power supply regulation keeps distortion down and maximizes sound quality.When using the MHD750/1 to drive a subwoofer system, the MHD600/4 is the ideal satellite amplifier, delivering huge dynamics with pristine resolution. It can also be deployed, on its own, as a very capable 3-channel system amplifier with 150W x 2 to the satellites and 300W x 1 to a subwoofer system.This marine amplifier features white and gray powder-coat finishes, a gasketed cover for the controls and stainless steel hardware for durability in the marine environment.USA Limited Warranty: Two (2) years from the original date of purchaseSpecifications Rated Continuous (RMS) Power @ 14.4 V @ 4 ohms 150 W RMS x 4 @ 3 ohms 150 W RMS x 4 @ 2 ohms 150 W RMS x 4 @ 1.5 ohms 150 W RMS x 4 Bridged @ 8 ohms 300 W RMS x 2 Bridged @ 4 ohms 300 W RMS x 2 Rated Continuous (RMS) Power @ 12.5 V @ 4 ohms 150 W RMS x 4 @ 3 ohms 150 W RMS x 4 @ 2 ohms 150 W RMS x 4 @ 1.5 ohms 150 W RMS x 4 Bridged @ 8 ohms 300 W RMS x 2 Bridged @ 4 ohms 300 W RMS x 2 General Specifications Frequency Response 6 Hz - 30 kHz (+0, -1dB) S/N Ratio, referred to highest rated power >88.2 dB (A-weighted, 20 Hz - 20 kHz noise bandwidth) Damping Factor @ 4 ohms >300 / 50 Hz Damping Factor @ 2 ohms >150 / 50 Hz THD+N @ Rated Power <0.03% @ 4 ohms per Ch. Input Voltage Range @ RCA Inputs Switchable from 200 mV - 2 V RMS to 800 mV - 8 V RMS Min.Copper Power / Ground Wire Gauge 4 AWG wire Fuse Rating 50 A (AFS, AGU or MaxiFuse™) Signal Processing Filter Mode(s) Low-Pass or High-Pass Filter Slope(s) 12/24 dB/octave Filter Frequency Range 50 Hz - 500 Hz Detented, Calibrated Filter Freq. Potentiometers Yes Filter Defeat Function Yes Remote Level Control Optional (HD-RLC) Remote Level Modes 2 or All Channels Channel Input Mode Switch Yes (2/4 ch.) Pass-Through Preamp Output Buffered Source Channel Selection for PreOuts Yes Physical Specifications Height 1.93 in / 49 mm Width 10.74 in / 273 mm Depth 7.85 in / 199 mm
$1,349.99
-
JL Audio JL Audio MVi Marine Amplifier 5 Channel Full-Range 700 Watts 12v Integrated DSP
JL Audio MVi Marine Amplifier 5 Channel Full-Range 700 Watts 12v Integrated DSP98650Model: MV700/5i5-Channel Class D Marine System Amplifier with Integrated DSP, 75 W x 4 @ 4 ohms + 300 W x 1 @ 2 ohms - 14.4VEngineered to deliver reference-grade audio performance in marine environments, every MVi amplifier unites our cutting-edge NexD2™ switching amplifier technology with an integrated, full-featured digital signal processor.Equipped with our second-generation NexD2™ technology, the MV700/5i is capable of powering a complete marine audio system. It can drive four main speakers with 75 W x 4 @ 4 ohms, while also powering a subwoofer with up to 300W @ 2 ohms. Bridging the main channels transforms it into a very powerful, 3-channel system amplifier with up to 200W x 2 @ 4 ohms on the main channels and 300W @ 2 ohms on the subwoofer channel.The NexD2™ full-range technology in the main channels of this amplifier is DSP-controlled and features a reduced loop area design utilizing DirectFET™ outputs for outstanding fidelity, very low noise and exceptional efficiency. The subwoofer channel features an optimized low-frequency variant of the NexD2™ technology. The amplifier chassis is a ultra-compact, cast alloy design with marine-grade powder coat finish and corrosion-resistant hardware.Instead of traditional control knobs and switches, all amplifier adjustments and DSP functionality are configured via a compatible external device (PC, Tablet or Smartphone), with the appropriate JL Audio TüN® Software application installed.USA Limited Warranty: Two (2) years from the original date of purchaseSpecifications Rated Continuous (RMS) Power @ 14.4 V Main Channels @ 4 ohms 75 W RMS x 4 Main Channels @ 2 ohms 100 W RMS x 4 Main Channels - Bridged @ 4 ohms 200 W RMS x 2 Subwoofer Channel @ 4 ohms 180 W RMS x 1 Subwoofer Channel @ 3 ohms 240 W RMS x 1 Subwoofer Channel @ 2 ohms 300 W RMS x 1 Subwoofer Channel @ 1.5 ohms N/A Rated Continuous (RMS) Power @ 12.5 V Main Channels @ 4 ohms 60 W RMS x 4 Main Channels @ 2 ohms 90 W RMS x 4 Main Channels - Bridged @ 4 ohms 180 W RMS x 2 Subwoofer Channel @ 4 ohms 180 W RMS x 1 Subwoofer Channel @ 3 ohms 240 W RMS x 1 Subwoofer Channel @ 2 ohms 300 W RMS x 1 Subwoofer Channel @ 1.5 ohms N/A General Specifications Frequency Response (Main Channels) 12 Hz - 24 kHz (+0, -1dB) Frequency Response (Subwoofer Channel) 12 Hz - 1 kHz (+0, -1dB) S/N Ratio, referred to highest rated power (Analog Inputs - Main Channels) 99 dB (A-weighted, 20 Hz - 20 kHz noise bandwidth) S/N Ratio, referred to highest rated power (Analog Inputs - Subwoofer Channel) 99 dB (A-weighted, 20 Hz - 20 kHz noise bandwidth) S/N Ratio, referred to 1 W (Analog Inputs - Main Channels) 80 dB (A-weighted, 20 Hz - 20 kHz noise bandwidth) S/N Ratio, referred to 1 W (Analog Inputs - Subwoofer Channel) 72 dB (A-weighted, 20 Hz - 20 kHz noise bandwidth) Damping Factor @ 4 ohms >150 / 50 Hz Damping Factor @ 2 ohms >50 / 50 Hz THD+N @ Rated Power (Main Channels) <1% @ 2 ohms per Ch. THD+N @ Rated Power (Subwoofer Channels) <1% @ 2 ohms per Ch. Input Voltage Range @ RCA Inputs 250 mV - 16 V RMS Min.Copper Power / Ground Wire Gauge 4 AWG wire Fuse Rating 60 A (AFS, AGU or MaxiFuse™) IP Rating IPX2 (when mounted vertically with connections pointed downward) Physical Specifications Height 2.05 in / 52 mm Width 13.96 in / 355 mm Depth 6.93 in / 176 mm Net Weight 5.6 lb / 2.54 kg What's in the Box: MV700/5i Amplifier Power Connector (for 4 AWG wire) Speaker Output Harnesses (2) Subwoofer Output Harness 6 ft A/B USB Cable
$1,249.99
-
JL Audio JL Audio MHD Marine Amplifier Monoblock Wide-Range 750 Watts 12v
JL Audio MHD Marine Amplifier Monoblock Wide-Range 750 Watts 12v98225Model: MHD750/1Monoblock Class D Marine Wide-Range Amplifier, 750 W x 1 @ 1.5-4 ohmsThis ultra-compact monoblock amplifier employs our Single-Cycle Control switching design and R.I.P.S. technology to deliver 750 W of clean power into any impedance between 1.5 and 4 ohms, giving you the highest degree of flexibility in designing your subwoofer system.Tight power supply regulation keeps distortion ultra-low and maximizes your bass performance. While targeted primarily to subwoofer applications, the MHD750/1 is a full-range amplifier and can also be used to drive high-performance mid and high frequency speaker systems.This marine amplifier features white and gray powder-coat finishes, a gasketed cover for the controls and stainless steel hardware for durability in the marine environment.USA Limited Warranty: Two (2) years from the original date of purchase.Specifications Rated Continuous (RMS) Power @ 14.4 V @ 4 ohms 750 W RMS x 1 @ 3 ohms 750 W RMS x 1 @ 2 ohms 750 W RMS x 1 @ 1.5 ohms 750 W RMS x 1 Rated Continuous (RMS) Power @ 12.5 V @ 4 ohms 750 W RMS x 1 @ 3 ohms 750 W RMS x 1 @ 2 ohms 750 W RMS x 1 @ 1.5 ohms 750 W RMS x 1 General Specifications Frequency Response 6 Hz - 8 kHz (+0, -1dB) S/N Ratio, referred to highest rated power S/N Ratio, referred to highest rated power Damping Factor @ 4 ohms >500 / 50 Hz Damping Factor @ 2 ohms >250 / 50 Hz THD+N @ Rated Power (Main Channels) <0.03% @ 4 ohms Input Voltage Range @ RCA Inputs Switchable from 200 mV - 2 V RMS (Low) to 800 mV - 8 V RMS (High) Min.Copper Power / Ground Wire Gauge 4 AWG wire Fuse Rating 60 A (AFS, AGU or MaxiFuse™) Signal Processing Filter Mode(s) Low-Pass or High-Pass Filter Slope(s) 12/24 dB/octave Filter Frequency Range 50 Hz - 500 Hz Detented, Calibrated Filter Freq. Potentiometer Yes Filter Defeat Function Yes Infrasonic Filter 30 Hz, defeatable Bass Boost EQ (0 to +12 dB @ 45 Hz) No Output Polarity Switch Yes Remote Subwoofer Level Control Yes Remote Subwoofer Level Control Optional (HD-RLC) Pass-Through Preamp Output Buffered Physical Specifications Height 1.93 in / 49 mm Width 10.74 in / 273 mm Depth 7.85 in / 199 mm Net Weight 6.6 lb / 2.99 kg
$1,249.99
-
JL Audio JL Audio MVi Marine Amplifier Monoblock Sub-woofer Amplifier 1000 Watts 12v
JL Audio MVi Marine Amplifier Monoblock Sub-woofer Amplifier 1000 Watts 12v98645Model: MV1000/1Monoblock Class D Marine Subwoofer Amplifier, 1000 W x 1 @ 2 ohms / 600 W x 1 @ 4 ohms - 14.4VMV monoblock subwoofer amplifiers are engineered to deliver outstanding bass performance and fidelity, with exceptional efficiency in marine applications.All MV monoblock amplifiers are specifically designed to receive their input signals from the pre-outs of a full-range MVi amplifier, from which they will also receive all signal processing. For this reason, MV monoblock amplifiers have no onboard signal processing, other than a basic input sensitivity setting.Instead of traditional control knobs and switches, MV amplifiers are configured via a compatible external device (PC, Tablet or Smartphone), with the appropriate JL Audio TüN® Software application installed.Equipped with an exclusive, low-frequency variant of our NexD2™ switching amplifier technology, the MV1000/1 monoblock subwoofer amplifier generates up to 600 watts into 4 ohms, or a stunning 1000 watts into 2 ohms. Housed in a compact, cast alloy chassis with marine-grade powder coat finish, the MV1000/1 is outfitted with corrosion-resistant hardware and connectors.Specifications Rated Continuous (RMS) Power @ 14.4 V @ 4 ohms 600 W RMS x 1 @ 3 ohms 800 W RMS x 1 @ 2 ohms 1000 W RMS x 1 @ 1.5 ohms N/A Rated Continuous (RMS) Power @ 12.5 V @ 4 ohms 500 W RMS x 1 @ 3 ohms 650 W RMS x 1 @ 2 ohms 800 W RMS x 1 @ 1.5 ohms N/A General Specifications Frequency Response 12 Hz - 500 Hz (+0, -1dB) S/N Ratio, referred to highest rated power (Analog Inputs) 87 dB (A-weighted, 20 Hz - 20 kHz noise bandwidth) S/N Ratio, referred to 1 W (Analog Inputs) 60 dB (A-weighted, 20 Hz - 20 kHz noise bandwidth) Damping Factor @ 4 ohms >400 / 50 Hz Damping Factor @ 2 ohms >300 / 50 Hz THD+N @ Rated Power <1% @ 2 ohms per Ch. Input Voltage Range @ RCA Inputs 250 mV - 8 V RMS Min.Copper Power / Ground Wire Gauge 4 AWG wire Fuse Rating 80 A (AFS, AGU or MaxiFuse™) IP Rating IPX2 (when mounted vertically with connections pointed downward) Physical Specifications Height 2.05 in / 52 mm Width 13.96 in / 355 mm Depth 6.93 in / 176 mm Net Weight 5.6 lb / 2.54 kg What's in the Box: MV1000/1 Amplifier Power Connector (for 2 AWG wire) Subwoofer Output Harness 6 ft A/B USB Cable
$1,199.99
-
JL Audio JL Audio M7 12in Subwoofer with Titanium Sport Grille RGB LED
JL Audio M7 12in Subwoofer with Titanium Sport Grille RGB LED93674Model: M7-12IB-S-GmTi-i-4M7 12-inch Marine Subwoofer with Transflective™ LED Lighting for Infinite-Baffle Use (600 W, 4 ohms) - Gray Metallic Trim Ring, Titanium Sport Grille.Engineered as the reference standard for marine subwoofer performance, the M7-12IB is capable of producing staggering amounts of jaw-dropping bass in infinite-baffle applications.Built to withstand real-world marine duty, this M7-12IB is designed to operate without a dedicated enclosure. It boasts a monstrous 4-inch voice coil and rugged suspension system to deliver outstanding linear excursion for high output and power handling.The patent-pending Transflective™ RGB LED technology emits a smooth lighting effect through the woofer cone, with a choice of several lighting colors. Add an optional RGB controller to create thousands of color variations. Professional installation is strongly recommended.M7-12IB is best used with amplifier power in the 200W — 600W range and is optimized to operate with a large volume of air behind it (at least 3 cu. ft. / 84.95 l).Like all JL Audio marine speakers, this driver is built to withstand a real saltwater marine environment and deliver years of listening enjoyment.USA Limited Warranty: Two (2) years from the original date of purchase.Specifications General Specifications Continuous Power Handling (RMS) 600 W Nominal Impedance (Znom) 4 ohms Physical Specifications Nominal Diameter 12.00 in / 300 mm Overall Diameter 14.00 in / 356 mm Bolt Hole Circle Diameter 12.813 in / 325 mm Frontal Grilles Protrusion 1.48 in / 38 mm Mounting Hole Diameter 12.0625 in / 306 mm Mounting Depth 7.94 in / 202 mm Driver Displacement 0.148 cu ft / 4.19 L Net Weight 25.35 lb / 11.5 kg Parameters Free Air Resonance (Fs) 35.34 Hz Electrical "Q" (Qes) 0.856 Mechanical "Q" (Qms) 0.791 Equivalent Compliance (Vas) 1.99 cu ft / 56.35 L One-Way Linear Excursion (Xmax)* 0.73 in / 18.5 mm Reference Efficiency (no) 0.28% Efficiency (1 W / 1 m)** 86.7 dB SPL Effective Piston Area (Sd) 80.54 sq in / 0.052 sq m DC Resistance (Re) 3.543 ohms * Xmax specifications are derived via one-way voice coil overhang method with no correction factors applied. ** Efficiency (1 W / 1 m) is not an accurate indicator of a subwoofer’s output capability and should not be used as a comparison to other subwoofers to determine which one is "louder". Enclosure Specifications Infinite Baffle Use Yes (preferred) Min. Sealed Enclosure Volume 2.0 cu ft / 56.6 L (or larger) Optimum Sealed Enclosure Volume 3.0 cu ft / 70.8 L
$1,129.99
-
JL Audio JL Audio M6 7.7in Enclosed Tower Speakers Titanium Sport Grille with RGB LED
JL Audio M6 7.7in Enclosed Tower Speakers Titanium Sport Grille with RGB LEDM6-770ETXv3-Sb-S-GmTi-i 93653Model: M6-770ETXv3-Sb-S-GmTi-iM6 7.7-inch Marine Enclosed Coaxial Speaker System with Transflective™ LED Lighting (100 W, 4 ohms) - Satin Black Enclosure, Gray Metallic Trim Ring, Titanium Sport GrilleEnclosed in these beautiful, injection-molded enclosures are our maximum-performance, M6 7.7-inch coaxial tower speakers, to deliver clean, loud audio that can be heard well beyond the boat when mounted up high.The enclosures feature a decorative, aluminum logo cap on the end opposite the speaker, which can be oriented to match any custom mounting application. Each is designed to mate with one of our mounting fixtures (sold separately, and available to fit a wide range of applications). The speaker cables exit through the center of the fixtures, staying high and dry, and out of sight. The patent-pending Transflective™ RGB LED technology emits a smooth lighting effect through the woofer cone, with a choice of several lighting colors. Add an optional RGB controller to create thousands of color variations. Professional installation is strongly recommended.For best results, we recommend powering these systems with an amplifier in the 40-200 W per channel range.Like all JL Audio marine speakers, this system is built to withstand a real saltwater marine environment and deliver years of listening enjoyment.Production of all M6 loudspeakers takes place in JL Audio’s Miramar, Florida factory, using global components and materials.Sold as a pair.Mounting Clamps Required (Sold Separately)USA Limited Warranty: Two (2) years from the original date of purchaseSpecifications General Specifications System Nominal Impedance 4 ohms System Frequency Response 45 Hz - 25 KHz ± 3 dB System Efficiency 91.0 dB @ 1 W / 1 m Continuous Power Handling (RMS) 100 W Recommended Amplifier Power (RMS) 40 - 200 W / Ch. Physical Specifications Enclosure Diameter 7.70 in / 196 mm Enclosure Depth 12.67 in / 322 mm Height including Mounting Clamp Receiver* 8.74 in / 222 mm Mounting Clamp Receiver / Enclosure Offset 1.04 in / 26 mm *Mounting Clamps Required (Sold Separately)
$1,129.99
-
JL Audio JL Audio M7 12in Subwoofer with White Sport Grille RGB LED
JL Audio M7 12in Subwoofer with White Sport Grille RGB LED93672Model: M7-12IB-S-GwGw-i-4M7 12-inch Marine Subwoofer with Transflective™ LED Lighting for Infinite-Baffle Use (600 W, 4 ohms) - Gloss White Trim Ring, Gloss White Sport Grille.Engineered as the reference standard for marine subwoofer performance, the M7-12IB is capable of producing staggering amounts of jaw-dropping bass in infinite-baffle applications.Built to withstand real-world marine duty, this M7-12IB is designed to operate without a dedicated enclosure. It boasts a monstrous 4-inch voice coil and rugged suspension system to deliver outstanding linear excursion for high output and power handling.The patent-pending Transflective™ RGB LED technology emits a smooth lighting effect through the woofer cone, with a choice of several lighting colors. Add an optional RGB controller to create thousands of color variations. Professional installation is strongly recommended.M7-12IB is best used with amplifier power in the 200W — 600W range and is optimized to operate with a large volume of air behind it (at least 3 cu. ft. / 84.95 l).Like all JL Audio marine speakers, this driver is built to withstand a real saltwater marine environment and deliver years of listening enjoyment.USA Limited Warranty: Two (2) years from the original date of purchase.Specifications General Specifications Continuous Power Handling (RMS) 600 W Nominal Impedance (Znom) 4 ohms Physical Specifications Nominal Diameter 12.00 in / 300 mm Overall Diameter 14.00 in / 356 mm Bolt Hole Circle Diameter 12.813 in / 325 mm Frontal Grilles Protrusion 1.48 in / 38 mm Mounting Hole Diameter 12.0625 in / 306 mm Mounting Depth 7.94 in / 202 mm Driver Displacement 0.148 cu ft / 4.19 L Net Weight 25.35 lb / 11.5 kg Parameters Free Air Resonance (Fs) 35.34 Hz Electrical "Q" (Qes) 0.856 Mechanical "Q" (Qms) 10.389 Total Speaker "Q" (Qts) 0.791 Equivalent Compliance (Vas) 1.99 cu ft / 56.35 L One-Way Linear Excursion (Xmax)* 0.73 in / 18.5 mm Reference Efficiency (no) 0.28% Efficiency (1 W / 1 m)** 86.7 dB SPL Effective Piston Area (Sd) 80.54 sq in / 0.052 sq m DC Resistance (Re) 3.543 ohms * Xmax specifications are derived via one-way voice coil overhang method with no correction factors applied. ** Efficiency (1 W / 1 m) is not an accurate indicator of a subwoofer’s output capability and should not be used as a comparison to other subwoofers to determine which one is "louder". Enclosure Specifications Infinite Baffle Use Yes (preferred) Min. Sealed Enclosure Volume 2.0 cu ft / 56.6 L (or larger) Optimum Sealed Enclosure Volume 3.0 cu ft / 70.8 L
$1,099.99
-
JL Audio JL Audio XDM Marine Amplifier 8-Channel Full-Range 800 Watt 24v
JL Audio XDM800/8-24V 8 Ch. Class D Full-Range Car/Marine Amplifier, 800 W, For 24V SystemsModel: XDM800/8-24VFor 24V systems only: 8-Channel Class D Full-Range Car/Marine Amplifier, 100 W x 8 @ 2 ohms / 75 W x 8 @ 4 ohms - 14.4VThe ultra-versatile XDM800/8-24V delivers eight channels of crystal-clear, full-range power and is capable of delivering a whopping 100 watts to each of its channels @ 2 ohms (28.8V, 1% THD). The technology that makes this much power possible in such a compact chassis is our advanced NexD™ high-speed switching design, which permits full bandwidth Class D operation with extremely low distortion and remarkable efficiency.Suitable for car or boat installations, the XDM800/8-24V is built with marine-grade materials and features an exclusive, dual-mode input filter for noise-free performance in boats or cars. Automatic turn-on capability (via signal sensing or DC-offset sensing) is also onboard for easy factory system upgrades.The XDM800/8-24V includes a 12 dB / octave filter for each channel bank, which can be configured as a low-pass or high-pass filter, and offers continuously variable cutoff frequency selection from 50-500 Hz. With the addition of an optional HD-RLC or MHD-RLC (water-resistant) remote level controller (each sold separately), you have the ability to adjust the level of two, four, or all eight amplifier channels directly from the driver's seat or cockpit.Finished in a sleek, black powder-coat, all controls are protected beneath a gasketed, removable top cover for easy access.This amplifier is designed for operation in vessels with 24 volt, negative-ground electrical systems. Use of this product in vessels with positive ground and/or voltages other than 24 volt may result in damage to the product and will void the warranty.Specifications Rated Continuous (RMS) Power @ 28.8 V @ 4 Ohms 75 W RMS x 8 @ 2 Ohms 100 W RMS x 8 Bridged @ 4 Ohms 200 W RMS x 4 Rated Continuous (RMS) Power @ 25 V @ 4 Ohms 60 W RMS x 8 @ 2 Ohms 90 W RMS x 8 Bridged @ 4Ohms 180 W RMS x 4 General Specifications Frequency Response 12 Hz - 22 kHz (+0, -1dB) S/N Ratio, referred to highest rated power >104 dB below rated power (A-weighted, 20 Hz - 20 kHz noise bandwidth) >104 dB below rated power (A-weighted, 20 Hz - 20 kHz noise bandwidth) >84 dB (A-weighted, 20 Hz - 20 kHz noise bandwidth) Damping Factor @ 4 Ohms >150 / 50 Hz Damping Factor @ 2 Ohms >75 / 50 Hz THD+N @ Rated Power <1% @ 2 Ohms per Ch. Input Voltage Range @ RCA Inputs 200 mV - 4 V RMS Min.Copper Power / Ground Wire Gauge 4 AWG wire Fuse Rating 40 A (AFS, AGU or MaxiFuse™) Signal Processing Filter Mode(s) Low-Pass or High-Pass Filter Slope(s) 12 dB/octave Filter Frequency Range 50 Hz - 500 Hz Detented, Calibrated Filter Freq. Potentiometers Yes Filter Defeat Function Yes Remote Level Control Optional HD-RLC or MHD-RLC (water-resistant) Remote Level Modes 2 or 4 or All Channels Channel Input Mode Switch Yes (2/4/6/8 ch.) Pass-Through Preamp Output None Source Channel Selection for PreOuts N/A What's in the Box: XDM800/8-24V Amp Wrench Badge
$1,099.99
-
JL Audio JL Audio M6 7.7in Enclosed Tower Speakers White Sport Grille with RGB LED
JL Audio M6 7.7in Enclosed Tower Speakers White Sport Grille with RGB LEDM6-770ETXv3-Gw-S-GwGw-i 93655Model: M6-770ETXv3-Gw-S-GwGw-iM6 7.7-inch Marine Enclosed Coaxial Speaker System with Transflective™ LED Lighting (100 W, 4 ohms) - Gloss White Enclosure, Gloss White Trim Ring, Gloss White Sport GrilleEnclosed in these beautiful, injection-molded enclosures are our maximum-performance, M6 7.7-inch coaxial tower speakers, to deliver clean, loud audio that can be heard well beyond the boat when mounted up high.The enclosures feature a decorative, aluminum logo cap on the end opposite the speaker, which can be oriented to match any custom mounting application. Each is designed to mate with one of our mounting fixtures (sold separately, and available to fit a wide range of applications). The speaker cables exit through the center of the fixtures, staying high and dry, and out of sight. The patent-pending Transflective™ RGB LED technology emits a smooth lighting effect through the woofer cone, with a choice of several lighting colors. Add an optional RGB controller to create thousands of color variations. Professional installation is strongly recommended.For best results, we recommend powering these systems with an amplifier in the 40-200 W per channel range.Like all JL Audio marine speakers, this system is built to withstand a real saltwater marine environment and deliver years of listening enjoyment.Production of all M6 loudspeakers takes place in JL Audio’s Miramar, Florida factory, using global components and materials.Sold as a pair.Mounting Clamps Required (Sold Separately)USA Limited Warranty: Two (2) years from the original date of purchase.Specifications General Specifications System Nominal Impedance 4 ohms System Frequency Response 45 Hz - 25 KHz ± 3 dB System Efficiency 91.0 dB @ 1 W / 1 m Continuous Power Handling (RMS) 100 W Recommended Amplifier Power (RMS) 40 - 200 W / Ch. Physical Specifications Enclosure Diameter 7.70 in / 196 mm Enclosure Depth 12.67 in / 322 mm Height including Mounting Clamp Receiver* 8.74 in / 222 mm Mounting Clamp Receiver / Enclosure Offset 1.04 in / 26 mm *Mounting Clamps Required (Sold Separately)
$1,099.99
-
JL Audio JL Audio M6 7.7in Enclosed Tower Speakers Titanium Sport Grille
JL Audio M6 7.7in Enclosed Tower Speakers Titanium Sport GrilleM6-770ETXv3-Sb-S-GmTi 93656Model: M6-770ETXv3-Sb-S-GmTiM6 7.7-inch Marine Enclosed Coaxial Speaker System (100 W, 4 ohms) - Satin Black Enclosure, Gray Metallic Trim Ring, Titanium Sport GrilleEnclosed in these beautiful, injection-molded enclosures are our maximum-performance, M6 7.7-inch coaxial tower speakers, to deliver clean, loud audio that can be heard well beyond the boat when mounted up high.The enclosures feature a decorative, aluminum logo cap on the end opposite the speaker, which can be oriented to match any custom mounting application. Each is designed to mate with one of our mounting fixtures (sold separately, and available to fit a wide range of applications). The speaker cables exit through the center of the fixtures, staying high and dry, and out of sight. Professional installation is strongly recommended.For best results, we recommend powering these systems with an amplifier in the 40-200 W per channel range.Like all JL Audio marine speakers, this system is built to withstand a real saltwater marine environment and deliver years of listening enjoyment.Production of all M6 loudspeakers takes place in JL Audio’s Miramar, Florida factory, using global components and materials.Sold as a pair.Mounting Clamps Required (Sold Separately)USA Limited Warranty: Two (2) years from the original date of purchase.Specifications General Specifications System Nominal Impedance 4 ohms System Frequency Response 45 Hz - 25 KHz ± 3 dB System Efficiency 91.0 dB @ 1 W / 1 m Continuous Power Handling (RMS) 100 W Recommended Amplifier Power (RMS) 40 - 200 W / Ch. Physical Specifications Enclosure Diameter 7.70 in / 196 mm Enclosure Depth 12.67 in / 322 mm Height including Mounting Clamp Receiver* 8.74 in / 222 mm Mounting Clamp Receiver / Enclosure Offset 1.04 in / 26 mm *Mounting Clamps Required (Sold Separately)
$1,079.99
-
JL Audio JL Audio MVi Marine Amplifier 4 Channel Full-Range 400 Watts 12v Integrated DSP
JL Audio MVi Marine Amplifier 4 Channel Full-Range 400 Watts 12v Integrated DSP98647Model: MV400/4i4-Channel Class D Full-Range Marine Amplifier with Integrated DSP, 100 W x 4 @ 2 ohms / 75 W x 4 @ 4 ohms - 14.4VEngineered to deliver reference-grade audio performance in marine environments, every MVi amplifier unites our cutting-edge NexD2™ switching amplifier technology with an integrated, full-featured digital signal processor.Outfitted with our second-generation NexD2™ technology, the MV400/4i produces up to 75 watts per channel into 4 ohms, or 100 watts into 2 ohms. It can also be bridged into 4 ohms, generating up to 200 W x 2.The NexD2™ full-range technology in this amplifier is DSP-controlled and features a reduced loop area design utilizing DirectFET™ outputs for outstanding fidelity, very low noise and exceptional efficiency. Housed in a compact, cast alloy chassis with marine-grade powder coat finish, the MV400/4i is outfitted with corrosion-resistant hardware and connectors.Instead of traditional control knobs and switches, all amplifier adjustments and DSP functionality are configured via a compatible external device (PC, Tablet or Smartphone), with the appropriate JL Audio TüN® Software application installed.USA Limited Warranty: Two (2) years from the original date of purchase.Specifications Rated Continuous (RMS) Power @ 14.4 V @ 4 ohms 75 W RMS x 4 @ 2 ohms 100 W RMS x 4 Bridged @ 4 ohms 200 W RMS x 2. Rated Continuous (RMS) Power @ 12.5 V @ 4 ohms 60 W RMS x 4 @ 2 ohms 90 W RMS x 4 Bridged @ 4 ohms 180 W RMS x 2 General Specifications Frequency Response 12 Hz - 24 kHz (+0, -1dB) S/N Ratio, referred to highest rated power (Analog Inputs) 99 dB (A-weighted, 20 Hz - 20 kHz noise bandwidth) S/N Ratio, referred to 1 W (Analog Inputs) 80 dB (A-weighted, 20 Hz - 20 kHz noise bandwidth) Damping Factor @ 4 ohms >100 / 50 Hz Damping Factor @ 2 ohms >50 / 50 Hz THD+N @ Rated Power <1% @ ohms per Ch. Input Voltage Range @ RCA Inputs 250 mV - 16 V RMS Min.Copper Power / Ground Wire Gauge 4 AWG wire Fuse Rating 40 A (AFS, AGU or MaxiFuse™) IP Rating IPX2 (when mounted vertically with connections pointed downward) Physical Specifications Height 2.05 in / 52 mm Width 11.20 in / 285 mm Depth 6.93 in / 176 mm Net Weight 5.0 lb / 2.27 kg What's in the Box: MV400/4i Amplifier Power Connector (for 4 AWG wire) Speaker Output Harnesses (2) 6 ft A/B USB Cable
$1,049.99
-
JL Audio JL Audio MVi Marine Amplifier 2 Channel Full-Range 600 Watts 12v Integrated DSP
JL Audio MVi Marine Amplifier 2 Channel Full-Range 2 Channel Full-Range 600 Watts 12v Integrated DSP98646Model: MV600/2i2-Channel Class D Full-Range Marine Amplifier with Integrated DSP, 300 W x 2 @ 2 ohms / 180 W x 2 @ 4 ohms- 14.4VEngineered to deliver reference-grade audio performance in marine environments, every MVi amplifier unites our cutting-edge NexD2™ switching amplifier technology with an integrated, full-featured digital signal processor.Outfitted with our second-generation NexD2™ technology, the MV600/2i produces up to 180 watts per channel into 4 ohms, or a powerful 300 watts into 2 ohms. It can also be bridged into 4 ohms to generate a stunning 600 W x 1.The NexD2™ full-range technology in this amplifier is DSP-controlled and features a reduced loop area design utilizing DirectFET™ outputs for outstanding fidelity, very low noise and exceptional efficiency. Housed in a compact, cast alloy chassis with marine-grade powder coat finish, the MV600/2i is outfitted with corrosion-resistant hardware and connectors.Instead of traditional control knobs and switches, all amplifier adjustments and DSP functionality are configured via a compatible external device (PC, Tablet or Smartphone), with the appropriate JL Audio TüN® Software application installed.USA Limited Warranty: Two (2) years from the original date of purchase.Specifications Rated Continuous (RMS) Power @ 14.4 V @ 4 ohms 180 W RMS x 2 @ 2 ohms 300 W RMS x 2 Bridged @ 4 ohms 600 W RMS x 1 Rated Continuous (RMS) Power @ 12.5 V @ 4 ohms 140 W RMS x 2 @ 2 ohms 225 W RMS x 2 Bridged @ 4 ohms 450 W RMS x 1 General Specifications Frequency Response 12 Hz - 24 kHz (+0, -1dB) S/N Ratio, referred to highest rated power (Analog Inputs) 99 dB (A-weighted, 20 Hz - 20 kHz noise bandwidth) S/N Ratio, referred to 1 W (Analog Inputs) 76 dB (A-weighted, 20 Hz - 20 kHz noise bandwidth) Damping Factor @ 4 ohms >100 / 50 Hz Damping Factor @ 2 ohms >50 / 50 Hz THD+N @ Rated Power <1% @ 2 ohms per Ch. Input Voltage Range @ RCA Inputs 250 mV - 16 V RMS Min.Copper Power / Ground Wire Gauge 4 AWG wire Fuse Rating 50 A (AFS, AGU or MaxiFuse™) IP Rating IPX2 (when mounted vertically with connections pointed downward) Physical Specifications Height 2.05 in / 52 mm Width 11.20 in / 285 mm Depth 6.93 in / 176 mm Net Weight 5.0 lb / 2.27 kg What's in the Box: MV600/2i Amplifier Power Connector (for 4 AWG wire) Speaker Output Harnesses (2) 6 ft A/B USB Cable
$1,049.99
-
JL Audio JL Audio M6 7.7in Enclosed Tower Speakers White Classic Grille
JL Audio M6 7.7in Enclosed Tower Speakers White Classic GrilleM6-770ETXv3-Gw-C-3Gw 93690Model: M6-770ETXv3-Gw-C-3GwM6 7.7-inch Marine Enclosed Coaxial Speaker System (100 W, 4 ohms) - Gloss White Enclosure, Gloss White Trim Ring, Gloss White Classic Grille, White Tweeter MeshEnclosed in these beautiful, injection-molded enclosures are our maximum-performance, M6 7.7-inch coaxial tower speakers, to deliver clean, loud audio that can be heard well beyond the boat when mounted up high.The enclosures feature a decorative, aluminum logo cap on the end opposite the speaker, which can be oriented to match any custom mounting application. Each is designed to mate with one of our mounting fixtures (sold separately, and available to fit a wide range of applications). The speaker cables exit through the center of the fixtures, staying high and dry, and out of sight. Professional installation is strongly recommended.For best results, we recommend powering these systems with an amplifier in the 40-200 W per channel range.Like all JL Audio marine speakers, this system is built to withstand a real saltwater marine environment and deliver years of listening enjoyment.Production of all M6 loudspeakers takes place in JL Audio’s Miramar, Florida factory, using global components and materials.Sold as a pair.Mounting Clamps Required (Sold Separately)USA Limited Warranty: Two (2) years from the original date of purchase.Specifications General Specifications System Nominal Impedance 4 ohms System Frequency Response 45 Hz - 25 KHz ± 3 dB System Efficiency 91.0 dB @ 1 W / 1 m Continuous Power Handling (RMS) 100 W Recommended Amplifier Power (RMS) 40 - 200 W / Ch. Physical Specifications Enclosure Diameter 7.70 in / 196 mm Enclosure Depth 12.62 in / 321 mm Height including Mounting Clamp Receiver* 8.74 in / 222 mm Mounting Clamp Receiver / Enclosure Offset 1.04 in / 26 mm *Mounting Clamps Required (Sold Separately)
$1,049.99
-
JL Audio JL Audio M6 7.7in Enclosed Tower Speakers White Sport Grille
JL Audio M6 7.7in Enclosed Tower Speakers White Sport GrilleM6-770ETXv3-Gw-S-GwGw 93654Model: M6-770ETXv3-Gw-S-GwGwM6 7.7-inch Marine Enclosed Coaxial Speaker System (100 W, 4 ohms) - Gloss White Enclosure, Gloss White Trim Ring, Gloss White Sport GrilleEnclosed in these beautiful, injection-molded enclosures are our maximum-performance, M6 7.7-inch coaxial tower speakers, to deliver clean, loud audio that can be heard well beyond the boat when mounted up high.The enclosures feature a decorative, aluminum logo cap on the end opposite the speaker, which can be oriented to match any custom mounting application. Each is designed to mate with one of our mounting fixtures (sold separately, and available to fit a wide range of applications). The speaker cables exit through the center of the fixtures, staying high and dry, and out of sight. Professional installation is strongly recommended.For best results, we recommend powering these systems with an amplifier in the 40-200 W per channel range.Like all JL Audio marine speakers, this system is built to withstand a real saltwater marine environment and deliver years of listening enjoyment.Production of all M6 loudspeakers takes place in JL Audio’s Miramar, Florida factory, using global components and materials.Sold as a pair.Mounting Clamps Required (Sold Separately)USA Limited Warranty: Two (2) years from the original date of purchase.Specifications General Specifications System Nominal Impedance 4 ohms System Frequency Response 45 Hz - 25 KHz ± 3 dB System Efficiency 91.0 dB @ 1 W / 1 m Continuous Power Handling (RMS) 100 W100 W100 W100 W Recommended Amplifier Power (RMS) 40 - 200 W / Ch. Physical Specifications Enclosure Diameter 7.70 in / 196 mm Enclosure Depth 12.67 in / 322 mm Height including Mounting Clamp Receiver* 8.74 in / 222 mm Mounting Clamp Receiver / Enclosure Offset 1.04 in / 26 mm *Mounting Clamps Required (Sold Separately)
$1,049.99
-
JL Audio JL Audio M6 7.7in Enclosed Tower Speakers White Classic Grille Black Tweeter
JL Audio M6 7.7in Enclosed Tower Speakers White Classic Grille Black TweeterM6-770ETXv3-Gw-C-GwGw 93651Model: M6-770ETXv3-Gw-C-GwGwM6 7.7-inch Marine Enclosed Coaxial Speaker System (100 W, 4 ohms) - Gloss White Enclosure, Gloss White Trim Ring, Gloss White Classic Grille, Black Tweeter MeshEnclosed in these beautiful, injection-molded enclosures are our maximum-performance, M6 7.7-inch coaxial tower speakers, to deliver clean, loud audio that can be heard well beyond the boat when mounted up high.The enclosures feature a decorative, aluminum logo cap on the end opposite the speaker, which can be oriented to match any custom mounting application. Each is designed to mate with one of our mounting fixtures (sold separately, and available to fit a wide range of applications). The speaker cables exit through the center of the fixtures, staying high and dry, and out of sight. Professional installation is strongly recommended.For best results, we recommend powering these systems with an amplifier in the 40-200 W per channel range.Like all JL Audio marine speakers, this system is built to withstand a real saltwater marine environment and deliver years of listening enjoyment.Production of all M6 loudspeakers takes place in JL Audio’s Miramar, Florida factory, using global components and materials.Sold as a pair.USA Limited Warranty: Two (2) years from the original date of purchaseMounting Clamps Required (Sold Separately)Specifications General Specifications System Nominal Impedance 4 ohms System Frequency Response 45 Hz - 25 KHz ± 3 dB System Efficiency 91.0 dB @ 1 W / 1 m Continuous Power Handling (RMS) 100 W Recommended Amplifier Power (RMS) 40 - 200 W / Ch. Physical Specifications Enclosure Diameter 7.70 in / 196 mm Enclosure Depth 12.62 in / 321 mm Height including Mounting Clamp Receiver* 8.74 in / 222 mm Mounting Clamp Receiver / Enclosure Offset 1.04 in / 26 mm *Mounting Clamps Required (Sold Separately)
$1,049.99
-
JL Audio JL Audio XDM Marine Amplifier 8-Channel 800 Watt 12v
JL Audio 8 Ch. Class D Full-Range Car/Marine Amplifier, 800 WModel: XDM800/8 Eight-channel Satellite Amp: drive four pairs of speakers with 75 W x 8 Big Four-Channel Satellite Amp: bridge to produce 200W x 4 @ 4? Six-Channel System Amp: drive front and rear satellites with 75 W x 4 @ 4?, plus two 4? subwoofers with 200 W each Staggered Six-Channel Satellite Amp: drive front speakers with 200 W x 2 @ 4?, plus four 4? speakers with 75 W each Staggered Five-Channel Satellite Amp: drive three front speakers with 200 W @ 4? + rear speakers with 75 W x 2 Four-Channel System Amp: drive left and right speakers with 200W x 2 @ 4?, plus two 4? subwoofers with 200W each The ultra-versatile XDM800/8 delivers eight channels of crystal-clear, full-range power and is capable of delivering a whopping 100 watts to each of its channels @ 2 ohms (14.4V, 1% THD). The technology that makes this much power possible in such a compact chassis is our advanced NexD™ high-speed switching design, which permits full bandwidth Class D operation with extremely low distortion and remarkable efficiency.Suitable for car or boat installations, the XDM800/8 is built with marine-grade materials and features an exclusive, dual-mode input filter for noise-free performance in boats or cars. Automatic turn-on capability (via signal sensing or DC-offset sensing) is also onboard for easy factory system upgrades.The XDM800/8 includes a 12 dB / octave filter for each channel bank, which can be configured as a low-pass or high-pass filter, and offers continuously variable cutoff frequency selection from 50-500 Hz. With the addition of an optional HD-RLC or MHD-RLC (water-resistant) remote level controller (each sold separately), you have the ability to adjust the level of two, four, or all eight amplifier channels directly from the driver's seat or cockpit.Finished in a sleek, black powder-coat, all controls are protected beneath a gasketed, removable top cover for easy access.Specifications Rated Continuous (RMS) Power @ 14.4 V @ 4 ? 75 W RMS x 8 @ 2 ? 100 W RMS x 8 Bridged @ 4? 200 W RMS x 4 Rated Continuous (RMS) Power @ 12.5 V @ 4 ? 60 W RMS x 8 @ 2 ? 90 W RMS x 8 Bridged @ 4? 180 W RMS x 4 General Specifications Frequency Response 12 Hz - 22 kHz (+0, -1dB) S/N Ratio, referred to highest rated power >104 dB below rated power (A-weighted, 20 Hz - 20 kHz noise bandwidth) S/N Ratio, referred to 1 W >84 dB (A-weighted, 20 Hz - 20 kHz noise bandwidth) Damping Factor @ 4 ? >150 / 50 Hz Damping Factor @ 2 ? >75 / 50 Hz THD+N @ Rated Power <1% @ 2 ? per Ch. Input Voltage Range @ RCA Inputs 200 mV - 4 V RMS Min.Copper Power / Ground Wire Gauge 4 AWG wire Fuse Rating 80 A (AFS, AGU or MaxiFuse™) Signal Processing Filter Mode(s) Low-Pass or High-Pass Filter Slope(s) 12 dB/octave Filter Frequency Range 50 Hz - 500 Hz Detented, Calibrated Filter Freq. Potentiometers Yes Filter Defeat Function Yes Remote Level Control Optional HD-RLC or MHD-RLC (water-resistant) Remote Level Modes 2 or 4 or All Channels Channel Input Mode Switch Yes (2/4/6/8 ch.) Pass-Through Preamp Output None Source Channel Selection for PreOuts N/A
$1,049.99
-
JL Audio JL Audio M7 12in Subwoofer with Titanium Sport Grille
JL Audio M7 12in Subwoofer with Titanium Sport Grille93673Model: M7-12IB-S-GmTi-4M7 12-inch Marine Subwoofer for Infinite-Baffle Use (600 W, 4 ohms) - Gray Metallic Trim Ring, Titanium Sport GrilleEngineered as the reference standard for marine subwoofer performance, the M7-12IB is capable of producing staggering amounts of jaw-dropping bass in infinite-baffle applications.Built to withstand real-world marine duty, this M7-12IB is designed to operate without a dedicated enclosure. It boasts a monstrous 4-inch voice coil and rugged suspension system to deliver outstanding linear excursion for high output and power handling.M7-12IB is best used with amplifier power in the 200W — 600W range and is optimized to operate with a large volume of air behind it (at least 3 cu. ft. / 84.95 l).Like all JL Audio marine speakers, this driver is built to withstand a real saltwater marine environment and deliver years of listening enjoyment.USA Limited Warranty: Two (2) years from the original date of purchaseSpecifications General Specifications Continuous Power Handling (RMS) 600 W Nominal Impedance (Znom) 4 ohms Physical Specifications Nominal Diameter 12.00 in / 300 mm Overall Diameter 14.00 in / 356 mm Bolt Hole Circle Diameter 12.813 in / 325 mm Frontal Grilles Protrusion 1.48 in / 38 mm Mounting Hole Diameter 12.0625 in / 306 mm Mounting Depth 7.94 in / 202 mm Driver Displacement 0.148 cu ft / 4.19 L Net Weight 25.35 lb / 11.5 kg Parameters Free Air Resonance (Fs) Free Air Resonance (Fs) 35.34 Hz Electrical "Q" (Qes) 0.856 Mechanical "Q" (Qms) 10.389 Total Speaker "Q" (Qts) 0.791 Equivalent Compliance (Vas) 1.99 cu ft / 56.35 L One-Way Linear Excursion (Xmax)* 0.73 in / 18.5 mm Reference Efficiency (no) 0.28% Efficiency (1 W / 1 m)** 86.7 dB SPL Effective Piston Area (Sd) 80.54 sq in / 0.052 sq m DC Resistance (Re) 3.543 ohms * Xmax specifications are derived via one-way voice coil overhang method with no correction factors applied. ** Efficiency (1 W / 1 m) is not an accurate indicator of a subwoofer’s output capability and should not be used as a comparison to other subwoofers to determine which one is "louder". Enclosure Specifications Infinite Baffle Use Yes (preferred) Min. Sealed Enclosure Volume 2.0 cu ft / 56.6 L (or larger) Optimum Sealed Enclosure Volume 3.0 cu ft / 70.8 L
$1,029.99
-
JL Audio JL Audio M7 12in Subwoofer with White Sport Grille
JL Audio M7 12in Subwoofer with White Sport Grille93671Model: M7-12IB-S-GwGw-4M7 12-inch Marine Subwoofer for Infinite-Baffle Use (600 W, 4 ohms) - Gloss White Trim Ring, Gloss White Sport Grille.Engineered as the reference standard for marine subwoofer performance, the M7-12IB is capable of producing staggering amounts of jaw-dropping bass in infinite-baffle applications.Built to withstand real-world marine duty, this M7-12IB is designed to operate without a dedicated enclosure. It boasts a monstrous 4-inch voice coil and rugged suspension system to deliver outstanding linear excursion for high output and power handling.M7-12IB is best used with amplifier power in the 200W — 600W range and is optimized to operate with a large volume of air behind it (at least 3 cu. ft. / 84.95 l).Like all JL Audio marine speakers, this driver is built to withstand a real saltwater marine environment and deliver years of listening enjoyment.USA Limited Warranty: Two (2) years from the original date of purchase.Specifications General Specifications Continuous Power Handling (RMS) 600 W Nominal Impedance (Znom) 4 ohms Physical Specifications Nominal Diameter 12.00 in / 300 mm Overall Diameter 14.00 in / 356 mm Bolt Hole Circle Diameter 12.813 in / 325 mm Frontal Grilles Protrusion 1.48 in / 38 mm Mounting Hole Diameter 12.0625 in / 306 mm Mounting Hole Diameter 12.0625 in / 306 mm Mounting Depth 7.94 in / 202 mm Driver Displacement 0.148 cu ft / 4.19 L Net Weight 25.35 lb / 11.5 kg Parameters Free Air Resonance (Fs) 35.34 Hz Electrical "Q" (Qes) 0.856 Mechanical "Q" (Qms) 10.389 Total Speaker "Q" (Qts) 0.791 Equivalent Compliance (Vas) 1.99 cu ft / 56.35 L One-Way Linear Excursion (Xmax)* 0.73 in / 18.5 mm Reference Efficiency (no) 0.28% Efficiency (1 W / 1 m)** 86.7 dB SPL Effective Piston Area (Sd) 80.54 sq in / 0.052 sq m DC Resistance (Re) 3.543ohms * Xmax specifications are derived via one-way voice coil overhang method with no correction factors applied. ** Efficiency (1 W / 1 m) is not an accurate indicator of a subwoofer’s output capability and should not be used as a comparison to other subwoofers to determine which one is "louder". Enclosure Specifications Infinite Baffle Use Yes (preferred) Min. Sealed Enclosure Volume 2.0 cu ft / 56.6 L (or larger) Optimum Sealed Enclosure Volume 3.0 cu ft / 70.8 L
$999.99
-
JL Audio JL Audio M7 12in Subwoofer with White Classic Grille
JL Audio M7 12in Subwoofer with White Classic Grille93669Model: M7-12IB-C-GwGw-4M7 12-inch Marine Subwoofer for Infinite-Baffle Use (600 W, 4 ohms) - Gloss White Trim Ring, Gloss White Classic GrilleEngineered as the reference standard for marine subwoofer performance, the M7-12IB is capable of producing staggering amounts of jaw-dropping bass in infinite-baffle applications.Built to withstand real-world marine duty, this M7-12IB is designed to operate without a dedicated enclosure. It boasts a monstrous 4-inch voice coil and rugged suspension system to deliver outstanding linear excursion for high output and power handling.M7-12IB is best used with amplifier power in the 200W — 600W range and is optimized to operate with a large volume of air behind it (at least 3 cu. ft. / 84.95 l).Like all JL Audio marine speakers, this driver is built to withstand a real saltwater marine environment and deliver years of listening enjoyment.USA Limited Warranty: Two (2) years from the original date of purchase.Specifications General Specifications Continuous Power Handling (RMS) 600 W Nominal Impedance (Znom) 4 ohms Physical Specifications Nominal Diameter 12.00 in / 300 mm Overall Diameter 14.00 in / 356 mm Bolt Hole Circle Diameter 12.813 in / 325 mm Frontal Grilles Protrusion 1.45 in / 37 mm Mounting Hole Diameter 12.0625 in / 306 mm Mounting Depth 7.94 in / 202 mm Driver Displacement 0.148 cu ft / 4.19 L Net Weight 25.35 lb / 11.5 kg Parameters Free Air Resonance (Fs) 35.34 Hz Electrical "Q" (Qes) 0.856 Mechanical "Q" (Qms) 10.389 Total Speaker "Q" (Qts) 0.791 Equivalent Compliance (Vas) 1.99 cu ft / 56.35 L One-Way Linear Excursion (Xmax)* 0.73 in / 18.5 mm Reference Efficiency (no) 0.28% Efficiency (1 W / 1 m)** 86.7 dB SPL Effective Piston Area (Sd) 80.54 sq in / 0.052 sq m DC Resistance (Re) 3.543 ohms * Xmax specifications are derived via one-way voice coil overhang method with no correction factors applied. ** Efficiency (1 W / 1 m) is not an accurate indicator of a subwoofer’s output capability and should not be used as a comparison to other subwoofers to determine which one is "louder". Enclosure Specifications Infinite Baffle Use Yes (preferred) Min. Sealed Enclosure Volume 2.0 cu ft / 56.6 L (or larger) Optimum Sealed Enclosure Volume 3.0 cu ft / 70.8 L
$999.99
-
JL Audio JL Audio XDM Marine Amplifier 5-Channel 1000 Watt 12v
JL Audio XDM1000/5 5 Ch. Class D, Car/Marine System Amplifier, 1000 WModel: XDM1000/5The XDM1000/5 delivers up to 1000 W of clean power and is ideal for an audiophile-grade, subwoofer + four satellite system. With this potent powerhouse, you can drive two pairs of quality component speaker systems with plenty of clean power (75 W x 4 @ 4 Ohms), while also generating a stout 600 W of power for a subwoofer system. The technology that makes this much power possible in such a small chassis is our high-speed NexD™ switching amplifier design.Suitable for car or boat installations, the XDM1000/5 is built with marine-grade materials and features an exclusive, dual-mode input filter for noise-free performance in boats or cars. Automatic turn-on capability (via signal sensing or DC-offset sensing) is also onboard for easy factory system upgrades.The XDM1000/5 includes a 12 dB / octave high-pass filter for one main channel pair, a 12 dB octave high-pass or bandpass filter for the other main channel pair, plus a variable slope low-pass filter for its subwoofer channel. All three filters offer continuously variable cutoff frequency selection from 50-500 Hz. This amplifier's filters can also be configured as a true 3-way crossover, with a low-pass filter for the subwoofer channel, a bandpass filter on Ch. 3 & 4, and a high-pass filter on Ch. 1 & 2. An "x10" multiplier switch on the Ch. 1 & 2 high-pass filter allows its cutoff frequency to be adjusted from 50-500 Hz or 500-5000 Hz. With the addition of an optional HD-RLC or MHD-RLC (water-resistant) remote level controller (each sold separately), you have the ability to adjust the level of all amplifier channels or just the subwoofer channel directly from the driver's seat or helm.Finished in a sleek, black powder-coat, all controls are protected beneath a gasketed, removable top cover for easy access.Specifications Rated Continuous (RMS) Power @ 14.4 V Main Channels @ 4 ohms 75 W RMS x 4 Main Channels @ 2 Ohms 100 W RMS x 4 Main Channels - Bridged @ 4 Ohms 200 W RMS x 2 Subwoofer Channel @ 4 Ohms 400 W RMS x 1 Subwoofer Channel @ 3 Ohms 500 W RMS x 1 Subwoofer Channel @ 2 Ohms 600 W RMS x 1 Subwoofer Channel @ 1.5 Ohms N/A Rated Continuous (RMS) Power @ 12.5 V Main Channels @ 4 Ohms 60 W RMS x 4 Main Channels @ 2 Ohms 90 W RMS x 4 Main Channels - Bridged @ 4 Ohms 180 W RMS x 2 Subwoofer Channel @ 4 Ohms 360 W RMS x 1 Subwoofer Channel @ 3 Ohms 480 W RMS x 1 Subwoofer Channel @ 2 Ohms 600 W RMS x 1 Subwoofer Channel @ 1.5 Ohms N/A General Specifications Frequency Response (Main Channels) 12 Hz - 22 kHz (+0, -1dB) Frequency Response (Subwoofer Channel) 10 Hz - 1 kHz (+0, -1dB) S/N Ratio, referred to highest rated power (Main Channels) >104 dB below rated power (A-weighted, 20 Hz - 20 kHz noise bandwidth) S/N Ratio, referred to 1 W >84 dB (A-weighted, 20 Hz - 20 kHz noise bandwidth) Damping Factor @ 4 Ohms >150 / 50 Hz Damping Factor @ 2 Ohms >75 / 50 Hz THD+N @ Rated Power (Main Channels) <1% @ 2 Ohms per Ch. THD+N @ Rated Power (Subwoofer Channels) <1% @ 2 Ohms per Ch. Input Voltage Range @ RCA Inputs 200 mV - 4 V RMS Min.Copper Power / Ground Wire Gauge 4 AWG wire Fuse Rating 80 A (AFS, AGU or MaxiFuse™) Signal Processing Filter Mode(s): Channels 1 & 2 (front) High-Pass only Filter Slope(s): Channels 1 & 2 (front) 12 dB/octave Filter Frequency Range: Channels 1 & 2 (front) 50 Hz - 5 kHz Filter Mode(s): Channels 3 & 4 (rear) High-Pass or Bandpass Filter Slope(s): Channels 3 & 4 (rear) 12 dB/octave Filter Frequency Range: Channels 3 & 4 50 Hz - 500 Hz Filter Mode(s): Subwoofer Channel Low-Pass only Filter Slope(s): Subwoofer Channel 12/24 dB/octave Filter Frequency Range: Subwoofer Channel 50 Hz - 500 Hz Detented, Calibrated Filter Freq. Potentiometers Yes Filter Defeat Function Yes Infrasonic Filter: Subwoofer Channel none Remote Level Control Optional HD-RLC or MHD-RLC (water-resistant) Remote Level Modes Sub Ch. or All Channels Channel Input Mode Switch Yes (2/4/6 ch.) Pass-Through Preamp Output None Source Channel Selection for PreOuts N/A
$999.99
-
JL Audio JL Audio StowAway 12in Sealed 4 Ohm Subwoofer
JL Audio PES112-TW1-4 Single 12TW1 StowAway™, Sealed, 4 ohmsModel: PES112-TW1-4 Finish: black texture with debossed logo on top; a protective mesh grille is included to protect the subwoofer Recommended amplifier power: 75—300 watts Nominal impedance: 4 ohms StowAway™ subwoofer systems are engineered to deliver amazing subwoofer performance in challenging environments and applications.Featuring a down-firing hard-shell design, StowAway subwoofers are well suited for mounting areas shared with cargo or exposed to the elements. Constructed from marine-grade materials, this low-profile enclosure design harnesses the incredible small box requirements of the TW1 subwoofer to generate smooth and powerful bass from a remarkably compact enclosure. Slotted mounting feet located at each corner of the enclosure’s base assist with "off-the-floor" installations or in tight spaces where access is limited.The StowAway subwoofer system is prewired with selectable harness exits located underneath at opposite ends.Note: Mounting hardware is not included with StowAway systems. The installation method and mounting hardware used will vary based on the requirements of your specific application. The final mounting method must affix the enclosure securely to prevent movement and vibration.Specifications General Specifications Continuous Power Handling (RMS) 300 W System Nominal Impedance 4 Ohms Enclosure Type Sealed Finish Black Texture Grille Included Yes Height (H) 8.23 in / 209 mm Width (W) 21.78 in / 553 mm Depth (D) 15.16 in / 385 mm What's in the Box:PES112-TW1-2 Single 12TW1 StowAway™
$899.99
-
JL Audio JL Audio StowAway 12in Sealed 4 Ohm Subwoofer
JL Audio PES112-TW1-2 Single 12TW1 StowAway™, Sealed, 2 ohmsModel: PES112-TW1-2 Finish: black texture with debossed logo on top; a protective mesh grille is included to protect the subwoofer Recommended amplifier power: 75—300 watts Nominal impedance: 2 ohms StowAway™ subwoofer systems are engineered to deliver amazing subwoofer performance in challenging environments and applications.Featuring a down-firing hard-shell design, StowAway subwoofers are well suited for mounting areas shared with cargo or exposed to the elements. Constructed from marine-grade materials, this low-profile enclosure design harnesses the incredible small box requirements of the TW1 subwoofer to generate smooth and powerful bass from a remarkably compact enclosure. Slotted mounting feet located at each corner of the enclosure’s base assist with "off-the-floor" installations or in tight spaces where access is limited.The StowAway subwoofer system is prewired with selectable harness exits located underneath at opposite ends.Note: Mounting hardware is not included with StowAway systems. The installation method and mounting hardware used will vary based on the requirements of your specific application. The final mounting method must affix the enclosure securely to prevent movement and vibration.Specifications General Specifications Continuous Power Handling (RMS) 300 W System Nominal Impedance 2 Ohms Enclosure Type Sealed Finish Black Texture Grille Included Yes Height (H) 8.23 in / 209 mm Width (W) 21.78 in / 553 mm Depth (D) 15.16 in / 385 mm What's in the Box:PES112-TW1-2 Single 12TW1 StowAway™
$899.99
-
JL Audio JL Audio XDM Marine Amplifier 5-Channel 700 Watt 12v
JL Audio XDM700/5 5 Ch. Class D, Car/Marine System Amplifier, 700 WModel: XDM700/5The XDM700/5 is ideal for a complete audiophile-grade, subwoofer + four satellite system, and fits comfortably in just about any vehicle or vessel. With this incredible little amplifier, you can drive two pairs of quality component speaker systems with plenty of clean power (75 W x 4 @ 4 Ohms), while also generating a solid 300 W of power for a subwoofer system. The technology that makes this much power possible in such a small chassis is our high-speed NexD™ switching amplifier design.Suitable for car or boat installations, the XDM700/5 is built with marine-grade materials and features an exclusive, dual-mode input filter for noise-free performance in boats or cars. Automatic turn-on capability (via signal sensing or DC-offset sensing) is also onboard for easy factory system upgrades.The XDM700/5 includes a 12 dB / octave high-pass filter for one main channel pair, a 12 dB octave high-pass or bandpass filter for the other main channel pair, plus a variable slope low-pass filter for its subwoofer channel. All three filters offer continuously variable cutoff frequency selection from 50-500 Hz. This amplifier's filters can also be configured as a true 3-way crossover, with a low-pass filter for the subwoofer channel, a bandpass filter on Ch. 3 & 4, and a high-pass filter on Ch. 1 & 2. An "x10" multiplier switch on the Ch. 1 & 2 high-pass filter allows its cutoff frequency to be adjusted from 50-500 Hz or 500-5000 Hz. With the addition of an optional HD-RLC or MHD-RLC (water-resistant) remote level controller (each sold separately), you have the ability to adjust the level of all amplifier channels or just the subwoofer channel directly from the driver's seat or helm.Finished in a sleek, black powder-coat, all controls are protected beneath a gasketed, removable top cover for easy access.Specifications Rated Continuous (RMS) Power @ 14.4 V Main Channels @ 4 Ohms 75 W RMS x 4 Main Channels @ 2 ohms 100 W RMS x 4 Main Channels - Bridged @ 4 Ohms 200 W RMS x 2 Subwoofer Channel @ 4 ohms 180 W RMS x 1 Subwoofer Channel @ 3 Ohms 240 W RMS x 1 Subwoofer Channel @ 2 Ohms 300 W RMS x 1 Subwoofer Channel @ 1.5 Ohms N/A Rated Continuous (RMS) Power @ 12.5 V Main Channels @ 4 Ohms 60 W RMS x 4 Main Channels @ 2 Ohms 90 W RMS x 4 Main Channels - Bridged @ 4 Ohms 180 W RMS x 2 Subwoofer Channel @ 4 Ohms 180 W RMS x 1 Subwoofer Channel @ 3 Ohms 240 W RMS x 1 Subwoofer Channel @ 2 Ohms 300 W RMS x 1 Subwoofer Channel @ 1.5 Ohms N/A General Specifications Frequency Response (Main Channels) 12 Hz - 22 kHz (+0, -1dB) Frequency Response (Subwoofer Channel) 10 Hz - 1 kHz (+0, -1dB) S/N Ratio, referred to highest rated power (Main Channels) >104 dB below rated power (A-weighted, 20 Hz - 20 kHz noise bandwidth) S/N Ratio, referred to 1 W >84 dB (A-weighted, 20 Hz - 20 kHz noise bandwidth) Damping Factor @ 4 ohms >150 / 50 Hz Damping Factor @ 2 Ohms >75 / 50 Hz THD+N @ Rated Power (Main Channels) <1% @ 2 Ohms per Ch. THD+N @ Rated Power (Subwoofer Channels) <1% @ 2 Ohms per Ch. Input Voltage Range @ RCA Inputs 200 mV - 4 V RMS Min.Copper Power / Ground Wire Gauge 4 AWG wire Fuse Rating 60 A (AFS, AGU or MaxiFuse™) Signal Processing Filter Mode(s): Channels 1 & 2 (front) High-Pass only Filter Slope(s): Channels 1 & 2 (front) 12 dB/octave Filter Frequency Range: Channels 1 & 2 (front) 50 Hz - 5 kHz Filter Mode(s): Channels 3 & 4 (rear) High-Pass or Bandpass Filter Slope(s): Channels 3 & 4 (rear) 12 dB/octave Filter Frequency Range: Channels 3 & 4 50 Hz - 500 Hz Filter Mode(s): Subwoofer Channel Low-Pass only Filter Slope(s): Subwoofer Channel 12/24 dB/octave Filter Frequency Range: Subwoofer Channel 50 Hz - 500 Hz Detented, Calibrated Filter Freq. Potentiometers Yes Filter Defeat Function Yes Infrasonic Filter: Subwoofer Channel none Remote Level Control Optional HD-RLC or MHD-RLC (water-resistant) Remote Level Modes Sub Ch. or All Channels Channel Input Mode Switch Yes (2/4/6 ch.) Pass-Through Preamp Output None Source Channel Selection for PreOuts N/A
$899.99
-
JL Audio JL Audio M3 7.7in Enclosed Tower Speakers Gray Sport Grille with RGB LED
JL Audio M3 7.7in Enclosed Tower Speakers Gray Sport Grille with RGB LEDModel: M3-770ETXv3-Sb-S-Gm-iM3 7.7-inch Marine Enclosed Coaxial Speaker System (70 W, 4 ohms) - Satin Black Enclosure, Gray Metallic Sport Grille with RGB LED IlluminationEnclosed in these beautiful, injection-molded enclosures are our high-performance, M3 7.7-inch coaxial tower speakers. Specifically tuned for tower enclosure applications, these coaxial drivers deliver clean, loud audio that can be heard well beyond the boat when mounted up high.The enclosures feature a decorative, aluminum logo cap on the end opposite the speaker, which can be oriented to match any custom mounting application. Each is designed to mate with one of our clamp systems (sold separately, and available to fit a wide range of pipe diameters). The wire exits through the center of the mount, staying high and dry, and out of sight.Integrated into the Sport Grille’s frame, the internal LED lighting assembly was meticulously designed to uniformly illuminate the woofer’s cone area with a lively glow, adding a dramatic visual experience to your high seas journey. Add an optional RGB controller to create thousands of color variations. Professional installation is strongly recommended.For best results, we recommend powering these systems with an amplifier in the 25-140 W per channel range.Like all JL Audio marine speakers, this system is built to withstand a real saltwater marine environment and deliver years of listening enjoyment.Sold as a pair.Mounting Clamps Required (Sold Separately)USA Limited Warranty: Two (2) years from the original date of purchase.Specifications System Nominal Impedance 4 ohms System Frequency Response 55 Hz - 25 KHz ± 3 dB System Efficiency 90.5 dB @ 1 W / 1 m Continuous Power Handling (RMS) 70 W Enclosure Diameter 7.70 in / 196 mm Enclosure Depth 12.52 in / 318 mm Height including Mounting Clamp Receiver 8.56 in / 217 mm Mounting Clamp Receiver / Enclosure Offset 0.86 in / 22 mm
$899.99
-
JL Audio JL Audio MVi Marine Amplifier Monoblock Sub-woofer Amplifier 600 Watts 12v
JL Audio MVi Marine Amplifier Monoblock Sub-woofer Amplifier 600 Watts 12v98644Model: MV600/14-Channel Class D Full-Range Amplifier, 125 W x 4 @ 2 ohms / 70 W x 4 @ 4 ohms - 14.4VEngineered specifically for powersports applications, the 4-channel MX500/4 amplifier employs our high-speed NexD™ switching design to deliver plenty of clean power, without straining charging systems. Its tiny, cast aluminum chassis is highly resistant to corrosion, with an IPX7 water-resistance rating, making it perfect for motorcycles, ATV’s or other utility vehicles.Generating a solid 70W x 4 into 4 ohms (14.4V, 1% THD), the MX500/4 is fully bridgeable, so it can be used as a 3-channel amplifier, or as a 2-channel amplifier producing a potent 250W x 2 into 4 ohms.Other features include independent front and rear crossovers with selectable full-range, high-pass or low-pass filter controls and a dual-range input section that accepts a wide range of input voltage levels, from line-level all the way to high-power speaker level signals.This amplifier features a rugged powder-coated finish, a gasketed cover for the controls and stainless steel hardware for durability.USA Limited Warranty: Two (2) years from the original date of purchase.Specifications Rated Continuous (RMS) Power @ 14.4 V @ 4 ohms 70 W RMS x 4 @ 2 ohms 125 W RMS x 4 Bridged @ 4 ohms 250 W RMS x 2 Rated Continuous (RMS) Power @ 12.5 V @ 4 ohms 55 W RMS x 4 @ 2 ohms 90 W RMS x 4 Bridged @ 4 ohms 180 W RMS x 2 General Specifications Frequency Response 20 Hz - 20 kHz (+0, -1dB) S/N Ratio, referred to highest rated power >88 dB below rated power (A-weighted, 20 Hz - 20 kHz noise bandwidth) S/N Ratio, referred to 1 W >70.5 dB (A-weighted, 20 Hz - 20 kHz noise bandwidth) Damping Factor @ 4 ohms >92 / 50 Hz Damping Factor @ 2 ohms >43 / 50 Hz THD+N @ Rated Power <1% @ 2 ohms per Ch. Input Voltage Range @ RCA Inputs Switchable from 250 mV - 4 V RMS (Low) to 750 mV - 15 V RMS (High) Min.Copper Power / Ground Wire Gauge 4 AWG wire Fuse Rating 50 A (AFS, AGU or MaxiFuse™) Signal Processing Filter Mode(s) Low-Pass or High-Pass Filter Slope(s) 12 dB/octave Filter Frequency Range 35 Hz - 300 Hz Detented, Calibrated Filter Freq. Potentiometers Yes Filter Defeat Function Yes Remote Level Control No Remote Level Modes N/A Channel Input Mode Switch Yes (2/3/4 ch.) Pass-Through Preamp Output None Source Channel Selection for PreOuts N/A Physical Specifications Height 1.77 in / 45 mm Width 9.33 in / 237 mm Depth 4.50 in / 115 mm What's in the Box: (1) Amplifier (4) Stainless steel mounting screws (1) User manual
$879.99
-
JL Audio JL Audio M6 8.8in Coaxial Speakers Titanium Sport Grille with RGB LED
JL Audio M6 8.8in Coaxial Speakers Titanium Sport Grille with RGB LEDM6-880X-S-GmTi-i 93827Model: M6-880X-S-GmTi-iM6 8.8-inch Marine Coaxial Speakers with Transflective™ LED Lighting (125 W, 4 ohms) - Gray Metallic Trim Ring, Titanium Sport GrilleThe same principle that makes our 7.7-inch marine speakers dominate over conventional 6.5-inch designs is delivered in a more powerful dose in our M6-880X 8.8-inch coaxials, with the added visual impact of our patent-pending, Transflective™ RGB LED lighting.These 8.8-inch diameter monsters offer significant performance advantages over our 7.7 inch models, and a huge advantage over conventional 6.5 inch marine coaxials. Thanks to 36% more cone area and almost double the excursion capability, the M6-880X's are capable of +6 dB greater low frequency output than our M6-770X 7.7-inch coaxial systems! The bass is so impressive that the M6-880X can be used without a subwoofer while still packing a very serious low-frequency punch. Used with a subwoofer, they offer vastly better dynamics and mid-bass impact than smaller speakers, making them the best choice when ultimate performance is desired.To make sure that the high-frequencies sound just as good as the bass, our engineers have designed an oversized, 1.25-inch, silk dome tweeter for this model. This new tweeter plays louder, cleaner and extends lower in frequency to better mate with the 8.8-inch woofer. A multi-order, true 2-way passive crossover is concealed within the woofer chassis, shielded from vibration and corrosion. Also included, is an automatic tweeter protection circuit to minimize the possibility of tweeter failure.Although M6-880X Coaxial Systems can be used with as little as 50 W per channel, but for best audio performance we recommend amplifiers capable of between 50-250 W of continuous power per channel. The patent-pending Transflective™ RGB LED technology emits a smooth lighting effect through the woofer cone, with a choice of several lighting colors. Add an optional RGB controller to create thousands of color variations. Professional installation is strongly recommended.Production of all M6 loudspeakers takes place in JL Audio’s Miramar, Florida factory, using global components and materials.Sold as a pair.USA Limited Warranty: Two (2) years from the original date of purchase.Specifications General Specifications Continuous Power Handling (RMS) 125 W Recommended Amplifier Power (RMS) 50 - 250 W / Ch. System Efficiency 90.5 dB @ 1 W / 1 m System Nominal Impedance 4 ohms System Frequency Response 38 Hz - 20 KHz ± 3 dB Coaxial Physical Specifications Frame Outer Diameter 8.80 in / 224 mm Bolt Hole Circle Diameter 7.97 in / 202 mm Frontal Grille Protrusion 1.45 in / 37 mm Mounting Hole Diameter 7.375 in / 187 mm Mounting Depth 5.00 in / 127 mm
$879.99
-
JL Audio JL Audio M3 7.7in Enclosed Tower Speakers White Sport Grille with RGB LED
JL Audio M3 7.7in Enclosed Tower Speakers White Sport Grille with RGB LEDModel: M3-770ETXv3-Gw-S-Gw-iM3 7.7-inch Marine Enclosed Coaxial Speaker System (70 W, 4 ohms) - Gloss White Enclosure, Gloss White Sport Grille with RGB LED IlluminationEnclosed in these beautiful, injection-molded enclosures are our high-performance, M3 7.7-inch coaxial tower speakers. Specifically tuned for tower enclosure applications, these coaxial drivers deliver clean, loud audio that can be heard well beyond the boat when mounted up high.The enclosures feature a decorative, aluminum logo cap on the end opposite the speaker, which can be oriented to match any custom mounting application. Each is designed to mate with one of our clamp systems (sold separately, and available to fit a wide range of pipe diameters). The wire exits through the center of the mount, staying high and dry, and out of sight.Integrated into the Sport Grille’s frame, the internal LED lighting assembly was meticulously designed to uniformly illuminate the woofer’s cone area with a lively glow, adding a dramatic visual experience to your high seas journey. Add an optional RGB controller to create thousands of color variations. Professional installation is strongly recommended.For best results, we recommend powering these systems with an amplifier in the 25-140 W per channel range.Like all JL Audio marine speakers, this system is built to withstand a real saltwater marine environment and deliver years of listening enjoyment.Sold as a pair.Mounting Clamps Required (Sold Separately)USA Limited Warranty: Two (2) years from the original date of purchase.Specifications System Nominal Impedance 4 ohms System Frequency Response 55 Hz - 25 KHz ± 3 dB System Efficiency 90.5 dB @ 1 W / 1 m Continuous Power Handling (RMS) 70 W Enclosure Diameter 7.70 in / 196 mm Enclosure Depth 12.52 in / 318 mm Height including Mounting Clamp Receiver 8.56 in / 217 mm Mounting Clamp Receiver / Enclosure Offset 0.86 in / 22 mm
$879.99
-
JL Audio JL Audio M6 VeX 6.5in Enclosed System Titanium Sport Grille with RGB LED
JL Audio M6 6.5-inch (165 mm) Enclosed Coaxial System, Gloss White Enclosure, Gloss White Trim Ring, Gloss White Sport GrilleModel: M6-650VEX-Mb-S-GmTi-iA rotating clamp receiver is included with each VEX™ pod to mate with an appropriate fixture (sold separately) for mounting to a flat surface, roll-cage or tower structure, allowing precise aiming for optimum sound. Pipe mounting fixtures (sold separately) are available in a variety of sizes to fit a wide range of tube diameters.The enclosures feature a decorative, aluminum logo cap on the end opposite the speaker, which can be oriented to match any custom mounting application. For convenience, ten feet of our 16AWG marine-grade, parallel conductor speaker cable is included with each VEX™ pod.Although VEX™ pods can be used with as little as 25 W per channel, we recommend powering these systems with an amplifier capable of 75-150 W of continuous power per channel. For best results, use with a subwoofer.Like all JL Audio marine speakers, this system is weatherproof and built to deliver years of listening enjoyment.Production of all M6 loudspeakers takes place in JL Audio’s Miramar, Florida factory, using global components and materials.The patent-pending Transflective™ RGB LED technology emits a smooth lighting effect through the woofer cone, with a choice of several lighting colors. Add an optional RGB controller to create thousands of color variations. Professional installation is strongly recommended.Product is pictured with Pipe-Mounting Clamps (sold separately).Specifications Continuous Power Handling (RMS) 75 W Recommended Amplifier Power (RMS) 25 - 150 W / Ch. System Efficiency 89.5 dB @ 1 W / 1 m System Nominal Impedance 4 ohms System Frequency Response 100 Hz - 25 KHz ± 3 dB What's in the Box: M9-650VEX x2 Lexan Logo Appliqu s x 2
$879.99
-
JL Audio JL Audio M6 8.8in Coaxial Speakers White Sport Grille with RGB LED
JL Audio M6 8.8in Coaxial Speakers White Sport Grille with RGB LEDM6-880X-S-GwGw-i 93731Model: M6-880X-S-GwGw-iM6 8.8-inch Marine Coaxial Speakers with Transflective™ LED Lighting (125 W, 4 ohms) - Gloss White Trim Ring, Gloss White Sport GrilleThe same principle that makes our 7.7-inch marine speakers dominate over conventional 6.5-inch designs is delivered in a more powerful dose in our M6-880X 8.8-inch coaxials, with the added visual impact of our patent-pending, Transflective™ RGB LED lighting.These 8.8-inch diameter monsters offer significant performance advantages over our 7.7 inch models, and a huge advantage over conventional 6.5 inch marine coaxials. Thanks to 36% more cone area and almost double the excursion capability, the M6-880X's are capable of +6 dB greater low frequency output than our M6-770X 7.7-inch coaxial systems! The bass is so impressive that the M6-880X can be used without a subwoofer while still packing a very serious low-frequency punch. Used with a subwoofer, they offer vastly better dynamics and mid-bass impact than smaller speakers, making them the best choice when ultimate performance is desired.To make sure that the high-frequencies sound just as good as the bass, our engineers have designed an oversized, 1.25-inch, silk dome tweeter for this model. This new tweeter plays louder, cleaner and extends lower in frequency to better mate with the 8.8-inch woofer. A multi-order, true 2-way passive crossover is concealed within the woofer chassis, shielded from vibration and corrosion. Also included, is an automatic tweeter protection circuit to minimize the possibility of tweeter failure.Although M6-880X Coaxial Systems can be used with as little as 50 W per channel, but for best audio performance we recommend amplifiers capable of between 50-250 W of continuous power per channel. The patent-pending Transflective™ RGB LED technology emits a smooth lighting effect through the woofer cone, with a choice of several lighting colors. Add an optional RGB controller to create thousands of color variations. Professional installation is strongly recommended.Production of all M6 loudspeakers takes place in JL Audio’s Miramar, Florida factory, using global components and materials.Sold as a pair.USA Limited Warranty: Two (2) years from the original date of purchaseSpecifications General Specifications Continuous Power Handling (RMS) 125 W Recommended Amplifier Power (RMS) 50 - 250 W / Ch. System Efficiency 90.5 dB @ 1 W / 1 m System Nominal Impedance 4 ohms System Frequency Response 38 Hz - 20 KHz ± 3 dB Coaxial Physical Specifications Frame Outer Diameter 8.80 in / 224 mm Bolt Hole Circle Diameter 7.97 in / 202 mm Frontal Grille Protrusion 1.45 in / 37 mm Mounting Hole Diameter 7.375 in / 187 mm Mounting Depth 5.00 in / 127 mm
$849.99
-
JL Audio JL Audio M3 7.7in Enclosed Tower Speakers Gray Sport Grille
JL Audio M3 7.7in Enclosed Tower Speakers Gray Sport GrilleModel: M3-770ETXv3-Sb-S-GmM3 7.7-inch Marine Enclosed Coaxial Speaker System (70 W, 4 ohms) - Satin Black Enclosure, Gray Metallic Sport GrilleEnclosed in these beautiful, injection-molded enclosures are our high-performance, M3 7.7-inch coaxial tower speakers. Specifically tuned for tower enclosure applications, these coaxial drivers deliver clean, loud audio that can be heard well beyond the boat when mounted up high.The enclosures feature a decorative, aluminum logo cap on the end opposite the speaker, which can be oriented to match any custom mounting application. Each is designed to mate with one of our clamp systems (sold separately, and available to fit a wide range of pipe diameters). The wire exits through the center of the mount, staying high and dry, and out of sight. Professional installation is strongly recommended.For best results, we recommend powering these systems with an amplifier in the 25-140 W per channel range.Like all JL Audio marine speakers, this system is built to withstand a real saltwater marine environment and deliver years of listening enjoyment.Sold as a pair.Mounting Clamps RequiredUSA Limited Warranty: Two (2) years from the original date of purchase.Specifications System Nominal Impedance 4 ohms System Frequency Response 55 Hz - 25 KHz ± 3 dB System Efficiency 90.5 dB @ 1 W / 1 m Continuous Power Handling (RMS) 70 W Enclosure Diameter 7.70 in / 196 mm Enclosure Depth 12.52 in / 318 mm Height including Mounting Clamp Receiver 8.56 in / 217 mm Mounting Clamp Receiver / Enclosure Offset 0.86 in / 22 mm
$849.99
-
JL Audio JL Audio M6 VeX 6.5in Enclosed System White Sport Grille with RGB LED
JL Audio M6 6.5-inch (165 mm) Enclosed Coaxial System with Transflective™ LED Lighting, Gloss White Enclosure, Gloss White Trim Ring, Gloss White Sport GrilleModel: M6-650VEX-Gw-S-GwGw-iIdeal for powersports, marine and off-road vehicle applications, these enclosed speaker systems include our maximum-performance, M6 6.5-inch marine coaxial speakers with silk dome tweeters housed in rugged, injection-molded enclosures to deliver clean, loud audio.A rotating clamp receiver is included with each VEX™ pod to mate with an appropriate fixture (sold separately) for mounting to a flat surface, roll-cage or tower structure, allowing precise aiming for optimum sound. Pipe mounting fixtures (sold separately) are available in a variety of sizes to fit a wide range of tube diameters.The enclosures feature a decorative, aluminum logo cap on the end opposite the speaker, which can be oriented to match any custom mounting application. For convenience, ten feet of our 6-conductor, multifunction cable is included with each VEX™ pod for making speaker and illumination connections.Although VEX™ pods can be used with as little as 25 W per channel, we recommend powering these systems with an amplifier capable of 75-150 W of continuous power per channel. For best results, use with a subwoofer.Like all JL Audio marine speakers, this system is weatherproof and built to deliver years of listening enjoyment.Production of all M6 loudspeakers takes place in JL Audio’s Miramar, Florida factory, using global components and materials.The patent-pending Transflective™ RGB LED technology emits a smooth lighting effect through the woofer cone, with a choice of several lighting colors. Add an optional RGB controller to create thousands of color variations. Professional installation is strongly recommended.Product is pictured with Pipe-Mounting Clamps (sold separately).Specifications Continuous Power Handling (RMS) 75 W Recommended Amplifier Power (RMS) 25 - 150 W / Ch. System Efficiency 89.5 dB @ 1 W / 1 m System Nominal Impedance 4 ohms System Frequency Response 100 Hz - 25 KHz ± 3 dB What's in the Box: M6-650VEX x 2 Aluminum Logo Caps x 2 One Tube of Silicone Adhesive
$849.99
-
JL Audio JL Audio XDM Marine Amplifier 6-Channel Full-Range 600 Watt 24v
JL Audio XDM600/6-24V 6 Ch. Class D, Full-Range Car/Marine Amplifier, 600 W, for 24V SystemsModel: XDM600/6-24VFor 24V systems only: 6-Channel Class D Full-Range Car/Marine Amplifier, 100 W x 6 @ 2 Ohm / 75 W x 6 @ 4 Ohm - 28.8VThe incredibly flexible XDM600/6-24V packs a serious full-range wallop and delivers a stunning 100 watts to each of its six channels into 2 ohms (28.8V, 1% THD). The technology that makes this much power possible in such a compact chassis is our advanced NexD™ high-speed switching design, which permits full bandwidth Class D operation with extremely low distortion and remarkable efficiency.Suitable for car or boat installations, the XDM600/6-24V is built with marine-grade materials and features an exclusive, dual-mode input filter for noise-free performance in boats or cars. Automatic turn-on capability (via signal sensing or DC-offset sensing) is also onboard for easy factory system upgrades.With the XDM600/6-24V, you have plenty of great use options. Configure it as a six-channel satellite amplifier with 75 W x 6 @ 4 ?, or bridge four of its channels to create a staggered power four-channel amplifier with 200 W x 2 @ 4 ? for your front satellites and 75 W x 2 @ 4 ? for your rear satellites. You can also drive two subwoofers with 200 W each, plus a pair of satellites with 75W x 2.The XDM600/6-24V includes a 12 dB / octave filter for each channel bank, which can be configured as a low-pass or high-pass filter and offers continuously variable cutoff frequency selection from 50-500 Hz. With the addition of an optional HD-RLC or MHD-RLC (water-resistant) remote level controller (each sold separately), you have the ability to adjust the level of two, four, or all six amplifier channels directly from the driver's seat or cockpit.Finished in a sleek, black powder-coat, all controls are protected beneath a gasketed, removable top cover for easy access.This amplifier is designed for operation in vessels with 24 volt, negative-ground electrical systems. Use of this product in vessels with positive ground and/or voltages other than 24 volt may result in damage to the product and will void the warranty.Specifications Rated Continuous (RMS) Power @ 28.8 V @ 4 Ohms 75 W RMS x 6 @ 2 Ohms 100 W RMS x 6 Bridged @ 4 Ohms 200 W RMS x 3 Rated Continuous (RMS) Power @ 25 V @ 4 Ohm 60 W RMS x 6 @ 2 Ohms 90 W RMS x 6 bridged @ 4 Ohms 180 W RMS x 3 General Specifications Frequency Response 12 Hz - 22 kHz (+0, -1dB) S/N Ratio, referred to highest rated power >104 dB below rated power (A-weighted, 20 Hz - 20 kHz noise bandwidth) S/N Ratio, referred to 1 W >84 dB (A-weighted, 20 Hz - 20 kHz noise bandwidth) Damping Factor @ 4 Ohm >150 / 50 Hz Damping Factor @ 2 Ohms >75 / 50 Hz THD+N @ Rated Power <1% @ 2 Ohms per Ch. Input Voltage Range @ RCA Inputs 200 mV - 4 V RMS Min.Copper Power / Ground Wire Gauge 8 AWG wire Fuse Rating 30 A (AFS, AGU or MaxiFuse™) Signal Processing Filter Mode(s) Low-Pass or High-Pass Filter Slope(s) 12 dB/octave Filter Frequency Range 50 Hz - 500 Hz Detented, Calibrated Filter Freq. Potentiometers Yes Filter Defeat Function Yes Remote Level Control Optional HD-RLC or MHD-RLC (water-resistant) Remote Level Modes 2 or 4 or All Channels Channel Input Mode Switch Yes (2/4/6 ch.) Pass-Through Preamp Output None Source Channel Selection for PreOuts N/A What's in the Box: XDM600/6-24V Wrench Badge Manual
$829.99
-
JL Audio JL Audio M6 8.8in Coaxial Speakers Titanium Sport Grille
JL Audio M6 8.8in Coaxial Speakers Titanium Sport Grille Speakers Titanium Sport GrilleModel: M6-880X-S-GmTiM6 8.8-inch Marine Coaxial Speakers (125 W, 4 ohms) - Gray Metallic Trim Ring, Titanium Sport GrilleThe same principle that makes our 7.7-inch marine speakers dominate over conventional 6.5-inch designs is delivered in a more powerful dose in our M6-880X 8.8-inch coaxials.These 8.8-inch diameter monsters offer significant performance advantages over our 7.7 inch models, and a huge advantage over conventional 6.5 inch marine coaxials. Thanks to 36% more cone area and almost double the excursion capability, the M6-880X's are capable of +6 dB greater low frequency output than our M6-770X 7.7-inch coaxial systems! The bass is so impressive that the M6-880X can be used without a subwoofer while still packing a very serious low-frequency punch. Used with a subwoofer, they offer vastly better dynamics and mid-bass impact than smaller speakers, making them the best choice when ultimate performance is desiredTo make sure that the high-frequencies sound just as good as the bass, our engineers have designed an oversized, 1.25-inch, silk dome tweeter for this model. This new tweeter plays louder, cleaner and extends lower in frequency to better mate with the 8.8-inch woofer. A high-quality, true 2-way crossover network precisely filters and balances the coaxial system for outstanding fidelity.Although M6-880X Coaxial Systems can be used with as little as 50 W per channel, but for best audio performance we recommend amplifiers capable of between 50-250 W of continuous power per channelProduction of all M6 loudspeakers takes place in JL Audio’s Miramar, Florida factory, using global components and materials.Sold as a pair.USA Limited Warranty: Two (2) years from the original date of purchase.Specifications General Specifications Continuous Power Handling (RMS) 125 W Recommended Amplifier Power (RMS) 50 - 250 W / Ch. System Efficiency 90.5 dB @ 1 W / 1 m System Nominal Impedance 4 ohms System Frequency Response 38 Hz - 20 KHz ± 3 dB Coaxial Physical Specifications Frame Outer Diameter 8.80 in / 224 mm Bolt Hole Circle Diameter 7.97 in / 202 mm Frontal Grille Protrusion 1.45 in / 37 mm Mounting Hole Diameter 7.375 in / 187 mm Mounting Depth 5.00 in / 127 mm
$829.99
-
JL Audio JL Audio M3 7.7in Enclosed Tower Speakers White Sport Grille
JL Audio M3 7.7in Enclosed Tower Speakers White Sport GrilleModel: M3-770ETXv3-Gw-S-GwM3 7.7-inch Marine Enclosed Coaxial Speaker System (70 W, 4 ohms) - Gloss White Enclosure, Gloss White Sport GrilleEnclosed in these beautiful, injection-molded enclosures are our high-performance, M3 7.7-inch coaxial tower speakers. Specifically tuned for tower enclosure applications, these coaxial drivers deliver clean, loud audio that can be heard well beyond the boat when mounted up high.The enclosures feature a decorative, aluminum logo cap on the end opposite the speaker, which can be oriented to match any custom mounting application. Each is designed to mate with one of our clamp systems (sold separately, and available to fit a wide range of pipe diameters). The wire exits through the center of the mount, staying high and dry, and out of sight. Professional installation is strongly recommended.For best results, we recommend powering these systems with an amplifier in the 25-140 W per channel range.Like all JL Audio marine speakers, this system is built to withstand a real saltwater marine environment and deliver years of listening enjoyment.Sold as a pair.Mounting Clamps Required (Sold Separately)Specifications System Nominal Impedance 4 ohms System Frequency Response 55 Hz - 25 KHz ± 3 dB System Efficiency 90.5 dB @ 1 W / 1 m Continuous Power Handling (RMS) 70 W Enclosure Diameter 7.70 in / 196 mm Enclosure Depth 12.52 in / 318 mm Height including Mounting Clamp Receiver 8.56 in / 217 mm Mounting Clamp Receiver / Enclosure Offset 0.86 in / 22 mm
$829.99
-
JL Audio JL Audio M3 7.7in Enclosed Tower Speakers White Classic Grille
JL Audio M3 7.7in Enclosed Tower Speakers White Classic GrilleModel: M3-770ETXv3-Gw-C-GwM3 7.7-inch Marine Enclosed Coaxial Speaker System (70 W, 4 ohms) - Gloss White Enclosure, Gloss White Classic GrilleEnclosed in these beautiful, injection-molded enclosures are our high-performance, M3 7.7-inch coaxial tower speakers. Specifically tuned for tower enclosure applications, these coaxial drivers deliver clean, loud audio that can be heard well beyond the boat when mounted up high.The enclosures feature a decorative, aluminum logo cap on the end opposite the speaker, which can be oriented to match any custom mounting application. Each is designed to mate with one of our clamp systems (sold separately, and available to fit a wide range of pipe diameters). The wire exits through the center of the mount, staying high and dry, and out of sight. Professional installation is strongly recommended.For best results, we recommend powering these systems with an amplifier in the 25-140 W per channel range.Like all JL Audio marine speakers, this system is built to withstand a real saltwater marine environment and deliver years of listening enjoyment.Sold as a pair.Mounting Clamps Required (Sold Separately)USA Limited Warranty: Two (2) years from the original date of purchase.Specifications General Specifications System Nominal Impedance 4 ohms System Frequency Response 55 Hz - 25 KHz ± 3 dB System Efficiency 90.5 dB @ 1 W / 1 m Continuous Power Handling (RMS) 70 W Recommended Amplifier Power (RMS) 20 - 140 W / Ch. Physical Specifications Enclosure Diameter 7.70 in / 196 mm Enclosure Depth 12.52 in / 318 mm Height including Mounting Clamp Receiver 8.56 in / 217 mm Mounting Clamp Receiver / Enclosure Offset 0.86 in / 22 mm
$829.99
-
JL Audio JL Audio M6 VeX 6.5in Enclosed System Titanium Sport Grille
JL Audio M6 6.5-inch (165 mm) Enclosed Coaxial System, Matte Black Enclosure, Gray Metallic Trim Ring, Titanium Sport GrilleModel: M6-650VEX-Mb-S-GmTiIdeal for powersports, marine and off-road vehicle applications, these enclosed speaker systems include our maximum-performance, M6 6.5-inch marine coaxial speakers with silk dome tweeters housed in rugged, injection-molded enclosures to deliver clean, loud audio.A rotating clamp receiver is included with each VEX™ pod to mate with an appropriate fixture (sold separately) for mounting to a flat surface, roll-cage or tower structure, allowing precise aiming for optimum sound. Pipe mounting fixtures (sold separately) are available in a variety of sizes to fit a wide range of tube diameters.The enclosures feature a decorative, aluminum logo cap on the end opposite the speaker, which can be oriented to match any custom mounting application. For convenience, ten feet of our 6-conductor, multifunction cable is included with each VEX™ pod for making speaker and illumination connections.Although VEX™ pods can be used with as little as 25 W per channel, we recommend powering these systems with an amplifier capable of 75-150 W of continuous power per channel. For best results, use with a subwoofer.Like all JL Audio marine speakers, this system is weatherproof and built to deliver years of listening enjoyment.Production of all M6 loudspeakers takes place in JL Audio’s Miramar, Florida factory, using global components and materials.Product is pictured with Pipe-Mounting Clamps (sold separately).Specifications Continuous Power Handling (RMS) 75 W Recommended Amplifier Power (RMS) 25 - 150 W / Ch. System Efficiency 89.5 dB @ 1 W / 1 m System Nominal Impedance 4 ohms System Frequency Response 100 Hz - 25 KHz ± 3 dB What's in the Box: M6-650VEX x 2 Aluminum Logo Caps x 2 One Tube of Silicone Adhesive
$829.99
You have seen 48 out of 208 products
