TotalScan/StructureScan 3D Replacement BracketReplacement bracket for TotalScan & StructureScan 3D Transom Mount TransducersHardware included Specifications: Type: Mounting Brackets Box Dimensions: 4"H x 5"W x 13"L WT: 0.8 lbs UPC: 9420024157183

Read more less

Trolling Motor Shaft Mount for Panoptix™ LVS32Mount a compatible Panoptix transducer on the shaft of your trolling motor with this kit. It's adjustable design fits all shaft diameters, including those on popular Minn Kota® and MotorGuide® trolling motors. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Mounting Brackets Box Dimensions: 1"H x 6"W x 7"L WT: 0.3 lbs UPC: 753759207823

Read more less

8-Pin Trnasducer Extension Cable- 10'Connect your transducer to your sonar device with this 10'(3M) 8-pin extension cable.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Extension Box Dimensions: 1"H x 6"W x 8"L WT: 0.5 lbs UPC: 753759128814

Read more less

Bullet/SplitShot Transom Mount BracketTransom mount bracket for Bullet & SplitShot Transducers Specifications: Type: Mounting Brackets Box Dimensions: 2"H x 3"W x 5"L WT: 0.2 lbs UPC: 9420024168370

Read more less

Garmin 12-Pin Mix & Match Cable for Chirp TransducersAirmar's Garmin Mix & Match CableFeatures: 12-Pin Specifically for Chirp Transducers This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Type: Adapters Box Dimensions: 1"H x 4"W x 4"L WT: 0.2 lbs UPC: 801769003239

Read more less

ActiveTarget 2 Trolling Motor Shaft Mount for 27-33mm ShaftsFeatures: Optional upgrade for ActiveTarget® & ActiveTarget® 2 Transducers Compatible with Ghost, Ghost X, Ultrex Quest & other trolling motor shafts with 27 – 33 mm diameter Easy to install with the new cam-lock style clamp Trouble-free adjustment between Forward, Down and three Scout positions (Scout Shallow, Scout Mid & Scout Deep) with clear alignment indicators for each position 0-degree offset in Forward & Down positions for effortless bait tracking In the Box: Shaft collar sub-assembly Arm sub-assembly Adapter arm Assembly Hardware

Read more less

Trolling Motor Barrel Mount for Panoptix™ LVS32Mount a compatible Panoptix transducer on the barrel of your trolling motor with this kit. It is easily adjustable as it features molded teeth and fits all barrel diameters, including those on popular Minn Kota® and MotorGuide® trolling motors.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Mounting Brackets Box Dimensions: 1"H x 7"W x 7"L WT: 0.25 lbs UPC: 753759207816

Read more less

Transom Mount BracketEasily attach your compatible 4-, 8- or 12-pin transducer to the transom of your boat with this mount that provides excellent sonar returns at all speeds.

Read more less

Replacement Transducer Bracket for Plastic Transom Mount Transducer with Depth & TempThis replacement Transducer Bracket is for the plastic transom mount that can be used to replace the dual frequency transducers included with many Garmin units.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Mounting Brackets Box Dimensions: 1"H x 2"W x 4"L WT: 0.3 lbs

Read more less

ActiveTarget 2 XL Trolling Motor Shaft MountFeatures: Included with all ActiveTarget® 2XL transducer SKUs Compatible with Ghost, Ghost X, Ultrex Quest & 27-33mm diameter round shafts/poles Easy to install with the new cam-lock style clamp Trouble-free adjustment between Forward/Down XL and two Scout XL positions (Scout XL Shallow & Scout XL Deep) with clear alignment indicators for each position 0-degree offset in Forward/Down XL position for effortless bait tracking In the Box: Shaft collar sub-assembly Arm sub-assembly Rubber spacers Assembly hardware Specifications: Type: Mounting Brackets Box Dimensions: 3"H x 7"W x 8"L WT: 1.1 lbs UPC: 9420064138982

Read more less

Navico 9-Pin Mix & Match Chirp Cable - 1MAirmar's 9-Pin Mix & Match Chirp Cable for Navico Med and High or Highwide TransducersFeatures: Length: 1M 9-Pin for Med, High, and Highwide Transducers, Single Chirp Transducers This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Type: Adapters Box Dimensions: 1"H x 6"W x 8"L WT: 0.1 lbs UPC: 801769003345

Read more less

XSONIC Transducer Adapter Cable to HOOK²Adapter cable to connect XSONIC Transducer to HOOK² Specifications: Type: Adapters Box Dimensions: 1"H x 5"W x 8"L WT: 0.2 lbs UPC: 9420024166963

Read more less

ActiveTarget™ 10' Extension CableThis extension is compatible with Lowrance ActiveTarget™.Features:10 ft. cable Specifications: Type: Cables Box Dimensions: 3"H x 6"W x 8"L WT: 1.15 lbs UPC: 9420064130436

Read more less

Extension Cable For LSS-1 or LSS-2 TransducerFor use specifically with Lowrance's LSS-1 or LSS-2 Transducer. If the 20' transducer cable is not long enough, the 10' extension cable is available. Specifications: Type: Extension Box Dimensions: 4"H x 4"W x 9"L WT: 0.9 lbs UPC: 042194534794

Read more less

TripleShot Transom Mount BracketTransom mount bracket for TripleShot Transducer Specifications: Type: Mounting Brackets Box Dimensions: 2"H x 3"W x 5"L WT: 0.2 lbs UPC: 9420024168387

Read more less

HS-WS-SS Mounting KitMounting kit for transom mount 83/200 kHz skimmer transducers Specifications: Type: Mounting Brackets Box Dimensions: 2"H x 3"W x 4"L WT: 0.1 lbs UPC: 042194504995

Read more less

7-Pin Transducer Adapter Cable to HOOK²This adapter cable will adapt any Navico 7-pin tranducer to a HOOK2 unit. Specifications: Type: Adapters Box Dimensions: 2"H x 6"W x 8"L WT: 0.2 lbs UPC: 9420024166956

Read more less

Adapter 7-Pin Blue Transducer to a 9-Pin Black UnitFeatures: Connects legacy 7-Pin Blue Transducer to a 9-Pin Black Unit Sonic Connector Transducer Adapter Cable Compatible With: HDS Gen3 Elite-Ti Series NSS evo2 GO XSE Series SonarHub™ Specifications: Type: Adapters Box Dimensions: 2"H x 6"W x 8"L WT: 0.2 lbs UPC: 9420024155301

Read more less

Navico 9-Pin Dual Mix & Match Cable for Dual Element TransducersFor dual-socket Navico/Lowrance/Simrad xSonic 9-pin equipment Mix and Match Cables for CHIRP TransducersMany CHIRP transducers are now made as Mix and Match models. These versions have a common base transducer with an attached 9-meter cable, plus an interchangeable short (1-meter) brand-specific adapter cable.The permanently-attached 9-meter cable ends in an Airmar 12-pin connector. This cable is run up through the boat to the equipment location. The short adapter cable connects to the transducer cable at one end and to the equipment at the other end.Both parts are needed for an installation. If the user changes equipment brand at some later time, the transducer and its attached cable can be left in place and only the adapter cable needs to be replaced.Note that CHIRP Mix and Match cables cannot be used with conventional 50/200kHz transducers.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Type: Adapters Box Dimensions: 1"H x 6"W x 9"L WT: 0.35 lbs UPC: 801769003352

Read more less

117WR-2 Transducer Hull Nut WrenchA single-handed wrench to tighten the hull nut on 2" bronze and stainless steel housings.You can use wrench 117WR-4 to brace the housing when using this wrench.For use with: B117 B150 B744V B744VL B765C SS555 Specifications: Type: Tools Box Dimensions: 1"H x 4"W x 9"L WT: 0.6 lbs

Read more less

75WR-1 Crows Foot Transducer WrenchTransducer wrenches are available for all bronze low profile transducers. They are used to facilitate holding of the transducer and tightening of the hull nut. Wrenches are constructed of 3/16" thick mild steel. They can easily be bent or modified to accommodate challenging installation locations. For use with: B75 SS75 Specifications: Type: Tools Box Dimensions: 1"H x 4"W x 5"L WT: 0.55 lbs

Read more less

10-Pin to 12-Pin Adapter Cable (0.4m) for TZT3Features: 10-Pin to 12-Pin ends Length: 0.4m Used specifically for Furuno's TZT3 This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Type: Adapters Box Dimensions: 1"H x 1"W x 1"L WT: 1 lbs UPC: 611679391438

Read more less

75WR-4 Transducer Housing WrenchA single-handed wrench that holds the main thru-hull housing via the 'wrench flats' on the side of the housing to facilitate tightening of the hull nut. Use wrench 75WR-2 or 75WR-3 for the hull nut.For use with: B75 SS75 Specifications: Type: Tools Box Dimensions: 1"H x 5"W x 10"L WT: 0.6 lbs

Read more less

75WR-2 Transducer Hull Nut WrenchA single-handed wrench to tighten the hull nut on bronze and stainless steel housings. You can use wrench 75WR-4 to brace the housing when using this wrench.For use with: B75 SS75 Specifications: Type: Tools Box Dimensions: 1"H x 5"W x 9"L WT: 0.65 lbs

Read more less

TripleShot™ HD T/M Bracket for Eagle Eye™Transom mount bracket for Eagle TripleShot HD Transducer. Specifications: Type: Mounting Brackets Box Dimensions: 2"H x 3"W x 6"L WT: 0.4 lbs UPC: 9420064135936

Read more less

Transducer Pigtail, 10-Pin(F), 2 MetersWARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Adapters Box Dimensions: 2"H x 6"W x 6"L WT: 0.3 lbs UPC: 801769003505

Read more less

8-Pin Female to Wire Block AdapterGarmin's adapter allows you to connect the wires on legacy 6-pin transducers with newer sonar that requires an 8-pin connection.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Adapters Box Dimensions: 3"H x 7"W x 7"L WT: 0.8 lbs UPC: 753759976286 Owner's Manual (pdf)

Read more less

Furuno 10-Pin Mix & Match Cable for 600W Non-CHIRP TransducersMix and Match 600W transducers are made as a common base transducer with a short (2m) cable attached, plus an interchangeable longer (8m) brand-specific adapter cable. The short pigtail attached to the transducer ends in an Airmar 5-pin male connector. The adapter cables have a matching Airmar 5-pin female connector at one end and the correct connector for a specific electronics brand at the other end.Both parts are needed for installation. If the user changes equipment brand later, the transducer can be left in place and the adapter cable replaced.*600W Mix and Match cables cannot be used with 1kw transducers or CHIRP transducers.Features: 10-Pin For Furuno 10-Pin equipment Specifications: Type: Adapters Box Dimensions: 2"H x 7"W x 7"L WT: 1.2 lbs UPC: 801769003611

Read more less

75WR-3 Double Handle Transducer WrenchTransducer wrenches are available for all bronze low profile transducers. They are used to facilitate holding of the transducer and tightening of the hull nut. Wrenches are constructed of 3/16" thick mild steel. They can easily be bent or modified to accommodate challenging installation locations. For use with: B75 SS75 Specifications: Type: Tools Box Dimensions: 4"H x 5"W x 7"L WT: 0.85 lbs

Read more less

60WR-2 Transducer Hull Nut WrenchA single-handed wrench to tighten the hull nut on 2" bronze and stainless steel housings. You can use wrench 60WR-4 to brace the housing when using this wrench.For use with: B60 SS60 Specifications: Type: Tools Box Dimensions: 1"H x 5"W x 9"L WT: 0.55 lbs

Read more less

60WR-1 Crows Foot Transducer WrenchTransducer wrenches are available for all bronze low profile transducers. They are used to facilitate holding of the transducer and tightening of the hull nut. Wrenches are constructed of 3/16" thick mild steel. They can easily be bent or modified to accommodate challenging installation locations. For use with: SS60 B60 Specifications: Type: Tools Box Dimensions: 1"H x 4"W x 5"L WT: 0.5 lbs

Read more less

4-Pin Transducer to 8-Pin Sonar PortConnect a 4-pin transducer to an 8-pin sonar port on your compatible marine device with this adapter cable.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Adapters Box Dimensions: 1"H x 4"W x 5"L WT: 0.1 lbs UPC: 753759197810

Read more less

Suction Cup Transducer AdapterUsing your fishfinder as a portable unit? Use this suction cup adapter to attach your transom mount transducer to the side of your boat. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Adapters Box Dimensions: 3"H x 5"W x 7"L WT: 0.25 lbs UPC: 753759023768

Read more less

Extension Cable with XID - 12-Pin - 30'Extend the cable length of your compatible 12-pin transducer with this 30 foot (9 meter) cable. Supports 12-pin Airmar transducer with XID.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Extension Box Dimensions: 2"H x 6"W x 8"L WT: 1.4 lbs UPC: 753759142834

Read more less

8-Pin Transducer to 12-Pin Sounder Adapter Cable w/XIDUse this adapter cable to connect an 8-pin transducer with XID to a 12-pin sonar port on a compatible marine device.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Adapters Box Dimensions: 1"H x 4"W x 7"L WT: 0.2 lbs UPC: 753759136345

Read more less

EC M10 Transducer Extension Cable - 10'10' extension cable for transducers. Current Models:  ICE HELIX, ICE Flashers, PiranhaMAX, HELIX 5, HELIX 7, HELIX 9, HELIX 10, HELIX 12Discontinued Series: 500 Series, 600 Series, 700 Series, 800 Series, 900 Series, 1100 SeriesLength: 10'WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Extension Box Dimensions: 2"H x 8"W x 9"L WT: 0.8 lbs UPC: 082324050350

Read more less

Attaches transducer to a trolling motor.Works with: Elite-5 DSI, Elite-5x DSI, Mark-5x DSI Specifications: Type: Mounting Brackets Box Dimensions: 4"H x 4"W x 9"L WT: 0.25 lbs UPC: 042194535944

Read more less

12-Pin Pigtail Cable for TZT3Furuno's 12-Pin Pigtail Cable specifically for TZT3.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Type: Adapters Box Dimensions: 2"H x 5"W x 6"L WT: 0.5 lbs UPC: 611679391315

Read more less

RealVision 3D Transducer Extension Cable - 5M(16')RealVision 3D Transducer Extension Cables work with both the transom mounted RV-100, as well as through-hull RV-200 and RV-300 series transducers.  Each extension cable features a waterproof, twist-lock connector at the MFD end, and a compatible socket at the transducer end.  For best performance, Raymarine recommends using no more than two (2) extension cables in any given cable run. Specifications: Type: Extension Box Dimensions: 2"H x 10"W x 10"L WT: 1.5 lbs UPC: 723193817087

Read more less

12-Pin XDR Extension Cable - 10MFeatures: Extension Cable For Furuno Transducer 10M (33' Length) 12-Pin Color: Black This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Type: Extension Box Dimensions: 4"H x 9"W x 12"L WT: 2.25 lbs UPC: 611679398840

Read more less

A80328 Adapter CableProduct Compatibility: Single B75/B175 Operation Cable Specifications: Type: Adapters Box Dimensions: 2"H x 9"W x 12"L WT: 0.4 lbs UPC: 723193796351

Read more less

Replacement Top Mount f/HDI 83/200/455/800 TMReplacement mount for Skimmer and top housing Specifications: Type: Mounting Brackets Box Dimensions: 3"H x 4"W x 7"L WT: 0.2 lbs UPC: 421945359518

Read more less

LSS-2 HD Skimmer Mounting Bracket - Stainless SteelMounting bracket for LSS-2 StructureScan HD transducer.Specifications:Stainless Steel Specifications: Type: Mounting Brackets Box Dimensions: 2"H x 7"W x 13"L WT: 0.95 lbs UPC: 9420024123751

Read more less

Locking Collar Kit for RealVision 25-PinRaymarine Spare RealVision 25-pin locking collar kit

Read more less

CPT-DV/CPT-DVS Mounting KitTransom Mount Bracket for CPT-DV & CPT-DVS Specifications: Type: Mounting Brackets Box Dimensions: 2"H x 6"W x 8"L WT: 0.2 lbs UPC: 723193795842

Read more less

MHX XNPT Portable Hardware KitMounting hardware and suction cup for portable XNT transducers. WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Mounting Brackets Box Dimensions: 4"H x 8"W x 8"L WT: 0.55 lbs UPC: 082324507694

Read more less

Mounting hardware for the XNT transom mount transducers. Includes a kick up bracket.WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Mounting Brackets Box Dimensions: 2"H x 8"W x 9"L WT: 0.45 lbs UPC: 082324507779 Owner's Manual (pdf)

Read more less

AD XTM 9Transducer Mounting HardwareThis hardware kit adapts to our standard transom mount transducers in the list below for use on the trolling motor.For use with:XNT 9 20 TXNT 9 QB 90 TXNT 9 SI 180 TXNT 9 QB 90XNT 9 20XNT 9 DI T1157c1158c1158c DI141C161323325343C345c345c DI363365i383C385ci385ci DI515525535550560561565570570 DI575580581i585C586C586c HD587CI587ci HD595C596C596c HD596c HD DI597CI597ci HD597ci HD DI717718727728737747c767768777c2778C778c HD787c2787c2I788C788ci788ci HD788ci HD DI798c SI798ci SI798ci HD SI858c858c DI917C957958c958c DI981C SIHDR 610MATRIX 10MATRIX 12MATRIX 15MATRIX 17MATRIX 20MATRIX 25MATRIX 27MATRIX 35MATRIX 37MATRIX 55MATRIX 65MATRIX 67MATRIX 77CMATRIX 87CMATRIX 97PIRANHA 1PIRANHA 2PIRANHA 3PIRANHA 4PIRANHA 5PiranhaMax 10PiranhaMax 15PiranhaMax 150PiranhaMax 160PiranhaMax 170PiranhaMax 180PiranhaMax 190CPiranhaMax 20PiranhaMax 210PiranhaMax 215PiranhaMax 220PiranhaMax 230PiranhaMax 240PiranhaMax 30WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Adapters Box Dimensions: 2"H x 7"W x 9"L WT: 0.5 lbs UPC: 082324507724 Owner's Manual (pdf)

Read more less