Power Cable - 8-PinPower and connect your compatible GPSMAP® device with this 8-pin power/data cable. Use with NMEA 0183 devices and a lamp or horn for visible or audible alerts.Compatible Devices: echoMAP™ Series GPSMAP® Series WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Power Cords Box Dimensions: 1"H x 5"W x 5"L WT: 0.4 lbs UPC: 753759998394

Read more less

GA™ 38 GPS/GLONASS Antenna for Cortex® V1 & M1Built to take advantage of the GLONASS system/constellation of satellites as well as standard GPS, this robust external antenna is packaged in a low-profile water-resistant housing and provides 3 easy mounting solutions: pole, surface, or under-deck (for the underside of fiberglass decks). External GPS/GLONASS antennas provide increased flexibility and installation options as well as the potential for enhanced reception of GPS/GLONASS signal for those products with built-in GPS/GLONASS antennas.Specifications: Dimensions (DxH): (inch) 3-19/32" x 1-5/18" / (mm) 91.6 x 49.5  Weight: 7.1 oz / 201 g. Temperature Range: -22° F to 176° F / -30° C to 80° C Case Material: Fully gasketed, high-impact plastic alloy, waterproof to IPX7 What's In The Box? GA 38 Surface mounting bracket Pole mounting bracket Under-deck mounting bracket Mounting hardware BNC-SMA antenna cable (32 ft/10m) Installation instructions Specifications: Type: Antennas Box Dimensions: 4"H x 4"W x 6"L WT: 0.8 lbs UPC: 753759318703

Read more less

Power/Data Cable - 4-PinUse this 6' power/data cable to power your compatible echoMAP. Includes NMEA 0183 inputs/outputs.Compatible Devices:echoMAP™ SeriesWARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Power Cords Box Dimensions: 1"H x 6"W x 6"L WT: 0.2 lbs UPC: 753759133573

Read more less

Split Connector Threaded for RJ45 Network Cables - 18mmRoute cables in your vessel without drilling holes with Garmin's split connector threaded, RJ 45 cable.Compatible Devices: GDL 30/30A GMR™ 12xx Series GMR™ 18 Series GMR™ 20/21/24/40 Series GMR™ 4xx/6xx Series GMS™ 10 Network Port Expander GPSMAP® Series GSD™ 22/24/25/26 Pedestal for GMR™ 404xHD/406xHD WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Bail Mount w/Quick Release Cradle f/ECHOMAP Ultra 12" Surface mount your compatible ECHOMAP™ Ultra chartplotter/sounder combo using our bail mount with knobs; the mount tilts for optimum viewing. Plugging the cables into the mount’s quick-release cradle allows you to seat/unseat your device with ease. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Mounting Brackets Box Dimensions: 4"H x 10"W x 15"L WT: 3.75 lbs UPC: 753759218379

Read more less

Cable GrommetUse Garmin's cable grommets to cover installation holes that have been drilled into your boat.Compatible Devices: GDL 30/30A GMR™ Series GPSMAP® Series GSD™ Series WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Threaded Power/Data Cable f/ ECHOMAP Ultra - 4 Pin Power your compatible ECHOMAP Ultra chartplotter/sounder combo with this 6 foot (2 meters) power/data cable. Includes NMEA 0183 input/output. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

HCCT Cable Connect Tray for HELIX®The HCCT- HELIX Cable Connector Tray organizes and protects all cables attached to your compatible HELIX unit. Allows for easy attachment or removal of cables when either hooking up or storing your HELIX unit.Features:  Compatible Fish Finders: HELIX 8 Series , HELIX 9 Series, HELIX 10 Series, HELIX 12 Series – All models Connect multiple cable inputs with a single tray. Simple installation for quick removal, storage and security of cables.

Read more less

Protective Cover for STRIKER™/Vivid 7" UnitsUse our cover to protect your compatible STRIKER™ from the harsh marine environment when not in use. Specifications: Type: Covers Box Dimensions: 2"H x 7"W x 13"L WT: 0.5 lbs UPC: 753759275617

Read more less

Protective Cover for GPSMAP® 9x3 SeriesProtect your compatible marine device from scratches and the sun when not in use. This protective cover fits snugly over the display to avoid exposure. Specifications: Type: Covers Box Dimensions: 1"H x 8"W x 10"L WT: 0.3 lbs UPC: 753759250713

Read more less

Tilt/Swivel Mount for STRIKER™ 5dv, 7dv & 7svSecure your compatible marine device with this mount that features tilt/swivel capabilities for optimum viewing.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Mounting Brackets Box Dimensions: 3"H x 6"W x 10"L WT: 0.6 lbs UPC: 753759150471

Read more less

Artificial HorizonAnswers the need of every sextant user who cannot depend on a natural sea horizon. Use for backyard practice, finding exact positon when inland, and making exact sextant shot on foggy mornings. To use, fill with water and read the angle of the reflected sun with your sextant. Half your sextant reading is the sun's angle above the true horizon. Windproof and corrosion resistant, the reflecting surface is completely enclosed.Comes with two sun shades, a lid and full directions. Compact 6" x 4" x 1-1/2" (15 x 10 x 4 cm). Owner's Manual (pdf)

Read more less

Mark 3 Marine SextantSometimes referred to as a "lifeboat" sextant, the Mark 3 is an inexpensive training sextant. Yet this model has taken sailors around the world, too! It is full-sized and has sunshades, but no optical magnification to help you find dim celestial bodies.Comes with instruction booklet. Owner's Manual (pdf)

Read more less

Mark 25 Sextant#025The top of the line Davis plastic sextant, the Mark 25 features our Beam Converger™ mirror, sometimes referred to as a "full horizon mirror". A special coating is applied to high quality optical glass to allow the user to see through this mirror, yet still pick up images as faint as low-light stars.The Mark 25 is illuminated by a long-life LED and made of an upgraded plastic that is very stable.Comes with instruction booklet. Owner's Manual (pdf)

Read more less

Mark 15 Sextant#026This model has many great features including seven large sunshades, a 3 mm x 27 mm star scope, and easy-to-read micrometer drum vernier scale that reads to 2/10 of a minute. The Mark 15 has a 7" (18 cm) frame radius graduated from 120° to -5° and comes with a traditional half-silvered mirror.Comes with instruction booklet. Owner's Manual (pdf)

Read more less

USB Card Reader with USB-C Adapter CableSave space on your helm with the compact, water-resistant SD™ card reader. It holds two full-size SD cards for quick access to charts, software updates, and ActiveCaptain® data.Featuring a 2-inch x 2-inch footprint, flush mounting, and USB connection to the back of your chartplotter, this card reader easily integrates into a crowded dash or elsewhere at the helm.Specifications: Dimensions (W×H×D): 2" x 2" x 2.4" (excluding the cable) Weight: 4.025 oz Temperature range: -15C to 70C Material: fully gasketed, high-impact plastic, waterproof to IPX7 standards Input power: 4.75V – 5.25V Maximum power usage at 10 Vdc: 2.5 W Typical current draw at 12 Vdc: 100 mA Maximum current draw at 12 Vdc: 500mA Compass-safe distance: 21 inches (533 mm) What's In The Box? Garmin USB card reader USB-C adapter cable Mounting hardware Power cable Documentation

Read more less

GRID™ 20 - VerticalSit Back and Take Control Provides intuitive, easy-to-use remote access and control of your entire Garmin marine system 360-degree, all-in-one joystick with a rotary knob and push-to-select button Enables easy chartplotter menu/setting navigation and fine control, even in the worst conditions 4 favorite keys can be designated to restore your system to a previously saved configuration Allows wired (NMEA 2000) or wireless installation options You don’t have to stand for hours at the helm. The easy-to-use GRID 20 remote input device provides intuitive remote access and control of your entire Garmin marine system. It features a 360-degree joystick with a rotary knob and push-to-select button for easy chartplotter menu/setting navigation and fine control, even in the worst conditions. You can designate 4 favorite keys to restore your system to a previously saved configuration. There are also a variety of hard keys for quick access to important functions, including left and right screen switches, autopilot standby/engage and more. For peace of mind, there’s also a dedicated SOS key. Wired or wireless installation and vertical or horizontal options allow for a plug-and-play solution that is tailored to your marine system. Its small footprint makes it convenient to integrate into a busy helm between displays — or even into the arm of the captain’s chair.In The Box: GRID 20 Mounting hardware Power cable Documentation WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Swivel Mounting BracketMount your chartplotter or sounder with Garmin's swivel mounting bracket.Compatible Devices: GPSMAP® 500 Series GXM™ 31 WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Mounting Brackets Box Dimensions: 2"H x 3"W x 7"L WT: 0.4 lbs UPC: 753759067496

Read more less

Combination Power and Data Cable Assembly, 2 MetersWARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Power Cords Box Dimensions: 2"H x 6"W x 6"L WT: 0.3 lbs

Read more less

HDS-12 LIVE Gimbal BracketHDS-12 LIVE Bracket with knobs. Specifications: Type: Mounting Brackets Box Dimensions: 4"H x 7"W x 19"L WT: 0.9 lbs UPC: 9420024174807

Read more less

Bail Mount with Quick Release Cradle for ECHOMAP™ UHD2 9svSurface mount your compatible ECHOMAP™ UHD2 chartplotter by using the bail mount with knobs; the mount tilts for optimum viewing. Plugging the cables into the mount’s quick-release cradle allows you to quickly seat/unseat your device with ease.Compatible Devices:ECHOMAP™ UHD2 9" Chartplotters

Read more less

Suncover for TZT12FKeep your electronics safe with Furuno's flexible screen cover.Compatible with:TZT12F Display*Sold as an IndividualThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Type: Covers Box Dimensions: 1"H x 9"W x 14"L WT: 0.65 lbs UPC: 611679391155

Read more less

DRS Signal/Power Cable - 15MFuruno's DRS Signal/Power Cable, 15 Meter. This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

RayNet (female) to RJ45 Male Cable - 3mRayNet network cables are for connecting the Digital Sounder Module (DSM) sonar, SR100 Sirius Weather Receiver and additional compatible Raymarine Multifunction Displays.The RayNet connector is used for connecting Raymarine network switches and SeaTalkhs devices to the multifunction display via RayNet cables. Also required for connecting a crossover coupler if only one device is being connected to the display's Network connector.Features: 3m (9.84 ft.) RayNet to SeaTalkhs (RJ45) cable

Read more less

1.5" NPT Displacement Hull Tank AdapterAdapter from Maretron for displacement hull tanks.WARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

Read more less

AS-EC-QDE Ethernet Adapter CableThis Ethernet adapter cable will allow you to use a Humminbird Ethernet cable (sold separately) to network an ethernet-equipped Humminbird fish finder with other compatible fish finders, Ethernet accessories and Minn Kota i-Pilot Link trolling motors.  Compatible with: HELIX 7 G2N & G3N models, all HELIX 8, HELIX 9, HELIX 10, HELIX 12 and HELIX 15 models, 859 models, 899 models, 959 models, 999 models, 1159 models, and 1199 models. Cable Length: 1 foot If you are networking two fish finders from the above list together, it will require two (2) AS EC QDE cables plus one (1) Ethernet cable of the appropriate length for your boat’s needs. 1-Year Limited Warranty WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Owner's Manual (pdf)

Read more less

GPSMAP® 2-Pin Power/Data Cable - 6'Power and connect your compatible GPSMAP® device with this 6-foot, 2-pin power/data cable.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Power Cords Box Dimensions: 1"H x 5"W x 7"L WT: 0.6 lbs UPC: 753759219079

Read more less

GP340 GNSS GPS ReceiverCompact, Versatile & Accurate PositioningThe GP340 is a high-performance GNSS Receiver designed for any type of vessel. Equipped with a powerful 75-channel GNSS core, this compact and cost-effective receiver offers extremely accurate position fixes within 3 meters. The GP340 features a 10 Hz refresh rate and is capable of data output in either NMEA2000 or NMEA0183* formats, making it an ideal GPS sensor for use with NavNet or countless other systems that rely on high-precision GPS information for demanding maritime, industrial, and survey applications.The GP340 Supports: GPS (L1/L5) GLONASS (L1) Galileo (E1/E5) QZSS (L1/L5) Beidou (B1/B2) The GP340 supports SBAS, including WAAS, EGNOS, MSAS, and GAGAN. The sensor comes with all of the hardware required for deck- or mast-mounting solutions, and a 6-meter cable with NMEA2000 connector is supplied as standard. An optional NMEA0183 cable is also available.Specifications: Data Type: NMEA0183 or NMEA2000 Power Usage: 12-24 VDC Receiver Type: GPS or GLONASS or QZSS or SBAS or WAAS or Galileo or WAAS-GPS *NMEA0183 requires optional cable Brochure (pdf)

Read more less

Suncover for NSS9 evo3Make sure your NSS9 evo3 continues to work like new by protecting it with the Simrad 9" Suncover. This sturdily made cover fits your system perfectly. It protects your unit from overexposure to sun glare during long boat trips. The cover is UV ray resistant. Specifications: Type: Covers Box Dimensions: 1"H x 7"W x 12"L WT: 0.45 lbs UPC: 9420024160879

Read more less

PC13 APEX® Power Cable - 6'The PC 13 is a marine-rated power cable for APEX chartplotters. Measuring 6' in length, this cable provides consistent power to the MFD and connects via a waterproof, twist-lock connector. Features: Compatible with: All APEX models Cable length: 6 ft (1.82 m) 1-Year Limited Warranty

Read more less

Tilt/Swivel Mount with Quick-Release Cradle f/echoMAP™ Plus 6XcvSurface mount your compatible echoMAP Plus chartplotter/sounder combo using our bail mount with knobs; the mount tilts and swivels for optimum viewing. Plugging the cables into the mount’s quick-release cradle allows you to seat/unseat your device with ease.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Mounting Brackets Box Dimensions: 4"H x 7"W x 11"L WT: 0.9 lbs UPC: 753759188801

Read more less

Suncover for Elite-9 Ti & Ti²Protective Suncover for Elite-9 Ti and Elite-9 Ti² Displays. Specifications: Type: Covers Box Dimensions: 1"H x 7"W x 11"L WT: 0.65 lbs UPC: 9420024159293

Read more less

Suncover for HDS-9 Gen3Make sure your fishfinder/charplotter continues to work like new by protecting it with the Lowrance sun cover. This sturdily made cover fits your GPS system perfectly. It protects your GPS from overexposure to sun glare during long boat trips. The cover is UV ray resistant. Works with all HDS-9 Gen3 units. Specifications: Type: Covers Box Dimensions: 1"H x 7"W x 11"L WT: 0.4 lbs UPC: 9420024138250

Read more less

USB-C to USB-A Male Adapter CableConnect your compatible GPSMAP® 9000 series chartplotter to a computer using this 15-foot USB cable and a compatible HDMI cable (sold separately). This water-resistant and secure connection allows you to touch the chartplotter screen to operate the computer, including the ability to see and touch the keyboard on the screen.

Read more less

ECU 10 - Reactor™ 40One of the main components for your Reactor 40 Hydraulic autopilot system, the ECU connects and powers the course computer unit (CCU) and the hydraulic pump, controlling the pump based on information received from the CCU.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Bottom Gasket Mounting Hardware for NightwaveBottom gasket, mounting screws, fuse & fuse holder, adjustment wrenches. This is a SIONYX official accessory.

Read more less

Marine Network Adapter Cable - RJ45 (Female) to BlueNet (Female)Adapt the Garmin BlueNet™ Network connector on your Garmin device to the legacy Garmin Marine Network connector. These cables do not replace the need to use a Garmin BlueNet™ 30 gateway. Check compatibility before purchase. Specifications: Type: Cables Box Dimensions: 2"H x 6"W x 8"L WT: 0.25 lbs UPC: 753759336981

Read more less

15M Video Extension Cable - Male to MaleConnect to your GC™ 10 camera for 15 m (49.21 feet) of extra cable length.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Field Installable ConnectorsUse our waterproof male/female field-installable connectors at the foot of the mast for easy connection of the mast cables on our gWindT family of transducers when stepping the mast.Compatible Devices: GND™ 10 Black Box Bridge gWind™ Race Transducer gWind™ Transducer gWind™ Wireless Transducer WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Tilt/Swivel Mounting BracketMount your echoMAP™ or GPSMAP® using this bracket. The mount swivels and tilts for optimum viewing.Compatible Devices: echoMAP™ 50dv echoMAP™ 50s GPSMAP® 547 GPSMAP® 547xs WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Mounting Brackets Box Dimensions: 3"H x 5"W x 6"L WT: 0.4 lbs UPC: 753759998356

Read more less

171 2.25" Ball System ArmFeatures: Engineering-grade nylon and Stainless steel construction Compatible with all 2.25″ Scotty ball system accessories The multi-hole top plate fits most popular electronics brands UV-resistant engineering-grade nylon construction Corrosion-resistant stainless steel hardware 2.25″ ball joints allow for 360 degrees of rotation and 180 degrees of tilt at both ends For 10-12″ fish finders Holds your device securely in extreme conditions Easy grip T-knob for loosening or tightening Designed for 1/4” fasteners (sold separately) Specifications: Type: Mounting Brackets Box Dimensions: 2"H x 6"W x 11"L WT: 0.85 lbs UPC: 062017001715

Read more less

170 2.25" Ball Mounting System for 10-12" ScreensComponents:  171 2.25" Ball System Arm 175 2.25" Ball System Top Plate for 10-12" Screens 176 2.25" Ball System Base 171 2.25" Ball System ArmFeatures: Engineering-grade nylon and Stainless steel construction Compatible with all 2.25″ Scotty ball system accessories The multi-hole top plate fits most popular electronics brands UV-resistant engineering-grade nylon construction Corrosion-resistant stainless steel hardware 2.25″ ball joints allow for 360 degrees of rotation and 180 degrees of tilt at both ends For 10-12″ fish finders Holds your device securely in extreme conditions Easy grip T-knob for loosening or tightening Designed for 1/4” fasteners (sold separately) 175 2.25" Ball System Top Plate for 10-12" ScreensFeatures: Engineering-grade nylon and Stainless steel construction Compatible with all 2.25″ Scotty ball system accessories The multi-hole top plate fits most popular electronics brands UV-resistant engineering-grade nylon construction Corrosion-resistant stainless steel hardware 2.25″ ball joints allow for 360 degrees of rotation and 180 degrees of tilt at both ends For 10-12″ fish finders Holds your device securely in extreme conditions Easy grip T-knob for loosening or tightening Designed for 1/4” fasteners (sold separately) 176 2.25" Ball System BaseFeatures: Engineering-grade nylon and stainless steel construction Compatible with all 2.25″ Scotty ball system accessories Equipped with the classic Scotty 241 hole pattern, allowing it to be paired with these options: 449 Portable Clamp Mount 320 Adaptable Rail Mount 242 Rail Mount Adapter 340 Track Adapter 441 Backing Plate 341 Glue-On Mount Pad28 Gimbal Mount Specifications: Type: Mounting Brackets Box Dimensions: 2"H x 7"W x 8"L WT: 2.4 lbs

Read more less

176 2.25" Ball System BaseFeatures: Engineering-grade nylon and stainless steel construction Compatible with all 2.25″ Scotty ball system accessories Equipped with the classic Scotty 241 hole pattern, allowing it to be paired with these options: 449 Portable Clamp Mount 320 Adaptable Rail Mount 242 Rail Mount Adapter 340 Track Adapter 441 Backing Plate 341 Glue-On Mount Pad 2028 Gimbal Mount Specifications: Type: Mounting Brackets Box Dimensions: 2"H x 7"W x 8"L WT: 0.7 lbs UPC: 062017001760

Read more less

161 1.5" Ball System ArmsFeatures: Engineering-grade nylon and stainless steel construction Compatible with all 1.5″ Scotty ball system accessories The multi-hole top plate fits most popular electronics brands UV-resistant engineering-grade nylon construction Corrosion-resistant stainless steel hardware 1.5″ ball joints allow for 360 degrees of rotation and 180 degrees of tilt at both ends 2-1/4” square fixed base For 7-9″ fish finders Holds your device securely in extreme conditions Easy grip T-knob for loosening or tightening Designed for 1/4” fasteners (sold separately) Specifications: Type: Mounting Brackets Box Dimensions: 2"H x 5"W x 10"L WT: 0.4 lbs UPC: 062017001616

Read more less

Suncover for HDS-12 LIVE Display Protective Suncover for HDS LIVE 12-inch displays. Specifications: Type: Covers Box Dimensions: 1"H x 9"W x 15"L WT: 0.7 lbs UPC: 9420024174760

Read more less

CLMD16-J2 Output Mating Connector with 1M LeadsOutput (J2) Mating Connector with 1m Flying Leads.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Cable Length (Feet): 3 Box Dimensions: 1"H x 6"W x 7"L WT: 0.8 lbs UPC: 873804004303

Read more less

Pole Mount for SCX20 & SCX21 Satellite CompassThis Furuno pole mount is specifically for the Furuno SCX20 and SCX21 satellite compasses.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Type: Pole Mount Box Dimensions: 2"H x 7"W x 7"L WT: 0.6 lbs UPC: 611679401526

Read more less

Point-1 GPS/HDG Antenna ModuleThe Lowrance Point-1 is the ideal position and heading device. The Point-1 provides extremely accurate and rapid boat position and speed updates. In addition – unlike other position-only antennas – the Point-1 provides heading for accurate boat direction at any speed and for radar/chart overlay. The Point-1 easily connects to any HDS Gen2, HDS Gen2 Touch or Elite-7 display or any NMEA 2000 network. It is fully waterproof and can be pole or surface mounted on any boat.Key Features: NMEA 2000® position and heading sensor Supports GPS and GLONASS, Galileo-capable with future software update Supports SBAS including WAAS/EGNOS/MSAS 10Hz updates for smooth and accurate location Integrated electronic compass provides 10Hz heading for chart stabilization and radar overlay, plus accurate course over ground even at low speeds Compact, rugged design for all marine environments and fully waterproof Includes spat/pole mount Not recommended for use with MARPA or Autopilot Comes With: Antenna N2K-T-RD, Micro-C T-Connector 000-0119-79 N2KEXT-15RD 4.5M Micro-C Cable 000-0119-86 Specifications: Type: Antennas Box Dimensions: 4"H x 8"W x 11"L WT: 1.7 lbs UPC: 9420064118656

Read more less