Mold & Mildew Stain Remover - 16ozSay goodbye to stubborn mold and mildew stains with Xanigo Marine’s Mold & Mildew Stain Remover! This powerful formula is easy to use and is the perfect solution for removing mold and mildew stains from boat tops, vinyl cushions, chairs, canopies, and more. Its versatile formula can also be used on rubber fenders, fiberglass, caulk, tile, grout, shower stalls, sinks, counters, and other surfaces that may be prone to mold and mildew.Simply spray the product onto a cool substrate, let it soak for a few minutes, and watch the mold and mildew disappear. To ensure the best results, avoid using it in direct sunlight.After removing it, make sure to PREVENT the mold from coming back with Xanigo Marine’s Mold & Mildew Preventer.Specifications:Bottle Size: 16 ouncesSTEP 1: Remove Mold & Mildew with Xanigo Marine's Mold & Mildew Stain RemoverXanigo Marin’s Mold & Mildew Stain Remover is a very effective way to remove mold and mildew. Being a harsh chemical, it should only be used once to remove the mold, and then the preventer should be applied to prevent the mold from coming back. Liberally apply the Mold & Mildew Stain Remover to the seats. Let it sit for 60-90 seconds but do not let it dry. An additional solution may need to be applied— keep it wet. Agitate in a circular motion with a brush to remove the mold from the pores. Rinse thoroughly with clean water.STEP 2: Neutralize the RemoverAfter rinsing the remover off with fresh water, it's important to make sure any leftover remover is neutralized so it doesn't dry out vinyl or impact stitching. Spray the Waterless Wash onto the seats and wipe it in with a microfiber cloth to neutralize the chemicals in the remover.STEP 3: Prevent Mold & Mildew with Xanigo Marine's Mold & Mildew PreventerWith just one application, a boat will be protected against mold and mildew for up to 90 days. The preventer creates a covalent bond with the surface on which it is applied. Users can apply this to almost any marine surface, including vinyl seats, life jackets, canvas, ropes, compartments, live wells, bilges, patio furniture, and other areas of high moisture.Spray the Mold & Mildew Preventer onto a clean, dry surface and spread it evenly with a microfiber cloth. Remember to spread, not wipe off.STEP 4: Maintain Seats with Xanigo Marine's Waterless WashKeep the boat clean between mold prevention applications without the use of harsh chemicals or wasting water. Spray the Waterless Wash onto the seats, let it sit for 15-20 seconds, and wipe it off with a microfiber cloth. Remove sunscreen (a major food source for mold) and leave a refreshing smell without impacting the protective layer created by the mold & mildew preventer.Also, a great way to shine up a gel coat quickly! Specifications: Type: Mildew & Moisture Box Dimensions: 3"H x 3"W x 8"L WT: 1.2 lbs UPC: 860007772771

Read more less

Mold & Mildew Stain Remover - 32ozSay goodbye to stubborn mold and mildew stains with Xanigo Marine’s Mold & Mildew Stain Remover! This powerful formula is easy to use and is the perfect solution for removing mold and mildew stains from boat tops, vinyl cushions, chairs, canopies, and more. Its versatile formula can also be used on rubber fenders, fiberglass, caulk, tile, grout, shower stalls, sinks, counters, and other surfaces that may be prone to mold and mildew.Simply spray the product onto a cool substrate, let it soak for a few minutes, and watch the mold and mildew disappear. To ensure the best results, avoid using it in direct sunlight.After removing it, make sure to PREVENT the mold from coming back with Xanigo Marine’s Mold & Mildew Preventer.Specifications:Bottle Size: 32 ouncesSTEP 1: Remove Mold & Mildew with Xanigo Marine's Mold & Mildew Stain RemoverXanigo Marin’s Mold & Mildew Stain Remover is a very effective way to remove mold and mildew. Being a harsh chemical, it should only be used once to remove the mold, and then the preventer should be applied to prevent the mold from coming back. Liberally apply the Mold & Mildew Stain Remover to the seats. Let it sit for 60-90 seconds but do not let it dry. An additional solution may need to be applied— keep it wet. Agitate in a circular motion with a brush to remove the mold from the pores. Rinse thoroughly with clean water.STEP 2: Neutralize the RemoverAfter rinsing the remover off with fresh water, it's important to make sure any leftover remover is neutralized so it doesn't dry out vinyl or impact stitching. Spray the Waterless Wash onto the seats and wipe it in with a microfiber cloth to neutralize the chemicals in the remover.STEP 3: Prevent Mold & Mildew with Xanigo Marine's Mold & Mildew PreventerWith just one application, a boat will be protected against mold and mildew for up to 90 days. The preventer creates a covalent bond with the surface on which it is applied. Users can apply this to almost any marine surface, including vinyl seats, life jackets, canvas, ropes, compartments, live wells, bilges, patio furniture, and other areas of high moisture.Spray the Mold & Mildew Preventer onto a clean, dry surface and spread it evenly with a microfiber cloth. Remember to spread, not wipe off.STEP 4: Maintain Seats with Xanigo Marine's Waterless WashKeep the boat clean between mold prevention applications without the use of harsh chemicals or wasting water. Spray the Waterless Wash onto the seats, let it sit for 15-20 seconds, and wipe it off with a microfiber cloth. Remove sunscreen (a major food source for mold) and leave a refreshing smell without impacting the protective layer created by the mold & mildew preventer.Also, a great way to shine up a gel coat quickly! Specifications: Type: Mildew & Moisture Box Dimensions: 4"H x 4"W x 10"L WT: 2.5 lbs UPC: 860007772788 Quick Guide (pdf)

Read more less

Waterless Wash & Fabric Refresher - 1qtThe Xanigo Marine Waterless Wash is the perfect way to keep the boat clean between Xanigo Marine Mold & Mildew Preventer applications without the use of harsh chemicals or wasting water. No hose or running water is needed!Protect investments by protecting against mold and mildew on seats, life jackets, vinyl, canvas, ropes, carpets, and other areas with high moisture.Specifications:Bottle Size: 1 quartThe Complete Process to Treat and Prevent Mold & Mildew on Vinyl Boat SeatsSTEP 1: Remove Mold & Mildew with Xanigo Marine's Mold & Mildew Stain RemoverXanigo Marin’s Mold & Mildew Stain Remover is a very effective way to remove mold and mildew. Being a harsh chemical, it should only be used once to remove the mold, and then the preventer should be applied to prevent the mold from coming back. Liberally apply the Mold & Mildew Stain Remover to the seats. Let it sit for 60-90 seconds but do not let it dry. An additional solution may need to be applied— keep it wet. Agitate in a circular motion with a brush to remove the mold from the pores. Rinse thoroughly with clean water.STEP 2: Neutralize the RemoverAfter rinsing the remover off with fresh water, it's important to make sure any leftover remover is neutralized so it doesn't dry out vinyl or impact stitching. Spray the Waterless Wash onto the seats and wipe it in with a microfiber cloth to neutralize the chemicals in the remover.STEP 3: Prevent Mold & Mildew with Xanigo Marine's Mold & Mildew PreventerWith just one application, a boat will be protected against mold and mildew for up to 90 days. The preventer creates a covalent bond with the surface on which it is applied. Users can apply this to almost any marine surface, including vinyl seats, life jackets, canvas, ropes, compartments, live wells, bilges, patio furniture, and other areas of high moisture.Spray the Mold & Mildew Preventer onto a clean, dry surface and spread it evenly with a microfiber cloth. Remember to spread, not wipe off.STEP 4: Maintain Seats with Xanigo Marine's Waterless WashKeep the boat clean between mold prevention applications without the use of harsh chemicals or wasting water. Spray the Waterless Wash onto the seats, let it sit for 15-20 seconds, and wipe it off with a microfiber cloth. Remove sunscreen (a major food source for mold) and leave a refreshing smell without impacting the protective layer created by the mold & mildew preventer.Also, a great way to shine up a gel coat quickly! Specifications: Type: Washes Box Dimensions: 3"H x 3"W x 10"L WT: 2.3 lbs UPC: 860007772740 Quick Guide (pdf)

Read more less

Caulking Mold Remove - 10.14oz BottleSay goodbye to those unsightly mold stains on your marine caulking! Marine Caulking Mold Remover is here to save the day. No more hassle, no more frustration – just a bright, clean, and refreshed look for your boat.Features: A single application is all it takes to restore the original beauty of your caulking! Remove stubborn mold from caulk and keep your boat in tip-top shape!  Simpler, faster, and more effective solution to moldy caulking. Instructions for Use: Step 1: Apply the remover gel directly on caulking and let it sit for 5+ hours (overnight is ideal). Step 2:Rinse with fresh water. Step 3: Apply Waterless Wash (not included) to caulking to neutralize the remover gel. Step 4:Prevent mold from returning with our Mold & Mildew Preventer (not included).

Read more less

Shore Power Cord & Rub Rail Cleaner with Glove - 1 GallonEnsure your boat is always in pristine condition with Xanigo Marine's Shore Power Cord & Rub Rail Cleaner. This powerful, bio-based solution is designed to clean and restore your shore power cords and rub rails with ease. Our product includes an innovative abrasive mitt to provide a simple, effective cleaning method. Perfect for routine maintenance to prevent problems before they start.Instructions for Use: Spray a small amount in an inconspicuous area to test compatibility. Spray the cleaner on the surface of the cord or rub rail and let it sit for 30 seconds. Use the included abrasive mitt, placing the cord in the palm of the mitt. Wrap your mitted hand around the cord or use the mitt flat on rub rails. Clean with a back-and-forth motion and watch as your cord and rub rail return to a like-new condition.

Read more less

3-Piece Marine Zipper & Snap Lube SetZippers and snaps can get stuck. Sometimes, stuck, leaving you with torn vinyl, canvas, straps, etc. The answer to stopping this is to clean and lube your snaps consistently with Xanigo Marine's Zipper and Snap Lube Set.Keep your boat in top shape with regular use of the Zipper and Snap Lube Set, ensuring smooth sailing and enjoyable boating experiences.The Complete Process to Treat & Prevent Mold & Mildew on Vinyl Boat Seats Zipper Tool: Prevents stuck zippers with regular cleaning and lubrication. Use the brush and squeeze the applicator to apply Xanigo Marine Cleaner & Lube every 30 days. Snap Tool: Cleans and lubricates snaps to prevent sticking. Apply fluid to male and female parts, rotating for thorough cleaning. Repeat every 30 days. Squeeze Applicator: A versatile tool to clean and lubricate various boat parts. Adjust the nozzle for controlled flow and squeeze to apply. Removes grease, dirt, and corrosion.

Read more less

Marine Ultimate Vinyl Boat Seat Care KitThe Complete Process to Treat and Prevent Mold & Mildew on Vinyl Boat Seats! Say goodbye to mold and mildew on your boat! The Xanigo Marine Ultimate Vinyl Boat Seat Care Kit is here to save the day. This kit includes everything you need to remove and prevent unsightly mold and mildew on your vinyl boat seats, life jackets, canvas, bumpers, carpet, and any other areas with high moisture.Three Solutions | Four Easy Steps: Step 1 Remove: Simply spray a generous amount of the Mold & Mildew Stain Remover onto the affected area and let it soak for 60-90 seconds. Agitate the area with a stiff bristled brush to remove the mold from the pores and let the product do its job, leaving behind a clean, like-new, seat! Thoroughly rinse away the residue with fresh water. Don't forget, no direct sunlight! Repeat if necessary. Step 2 Neutralize: Spray the Waterless Wash onto your seats and wipe it in with a microfiber cloth to neutralize the chemicals in the remover and prime the surface for the Mold & Mildew Preventer to bond to. That's it! Step 3 Prevent: Simply spray the Mold & Mildew Preventer onto a clean, dry surface and spread it evenly with a microfiber towel. That's it! With just one application, your boat will be protected against mold and mildew for up to 90 days. No wiping is required! Step 4 Maintain: Spray the Waterless Wash and wipe it down with a microfiber towel to clean away grime and sunscreen from your seats, all while enhancing the protective layer created by the Mold & Mildew Preventer. Do this every time you use your boat to keep it clean, fresh, and mold-free! What's Included? (1) 16 oz. bottle of Mold & Mildew Stain Remover (1) 32 oz. bottle of Mold & Mildew Preventer (1) 32 oz. bottle of Waterless Wash Brochure (pdf)

Read more less

Dock & Deck Cleaner - 1 GallonKeep the dock and deck looking great while reducing harmful chemical runoff!The base structure for the Xanigo Marine Dock & Deck Cleaner formula is made from plants, which enables it to have 94% bio-content as certified by the USDA. This uses next-generation renewable biosurfactant technology, is regarded as readily biodegradable, and is high-performing with high efficacy. Does not contain: Palm Oil, 1, 4-Dioxane, Formaldehyde, Proposition 65 Chemicals, Sulfates, Sodium Hydroxide, Glycol Ethers, Phosphates, Phthalates, Parabens, and AmmoniaInstructions for Use: For docks and decks, Xanigo Marine recommends a 1:5 to 1:20 dilution rate to enable proper cleaning. 1 gallon of Dock and Deck Cleaner to 5 to 20 gallons of water, depending on the job. This dilution ratio will provide effective cleaning power for composites, wood, and concrete Use a proper deck and dock brush with a minimum 2" bristle. The stiffness of the bristle should be tested on the dock users are trying to clean to determine which is the most effective For tough stains like blood, set-in bird drippings, or oils/greases, pour full strength into a spray bottle and spray the spots before scrubbing. After scrubbing the deck or dock, rinse with fresh water Specifications:Bottle Size: 1 gallonThe Complete Process to Treat and Prevent Mold & Mildew on Vinyl Boat SeatsSTEP 1: Remove Mold & Mildew with Xanigo Marine's Mold & Mildew Stain RemoverXanigo Marin’s Mold & Mildew Stain Remover is a very effective way to remove mold and mildew. Being a harsh chemical, it should only be used once to remove the mold, and then the preventer should be applied to prevent the mold from coming back. Liberally apply the Mold & Mildew Stain Remover to the seats. Let it sit for 60-90 seconds but do not let it dry. An additional solution may need to be applied— keep it wet. Agitate in a circular motion with a brush to remove the mold from the pores. Rinse thoroughly with clean water.STEP 2: Neutralize the RemoverAfter rinsing the remover off with fresh water, it's important to make sure any leftover remover is neutralized so it doesn't dry out vinyl or impact stitching. Spray the Waterless Wash onto the seats and wipe it in with a microfiber cloth to neutralize the chemicals in the remover.STEP 3: Prevent Mold & Mildew with Xanigo Marine's Mold & Mildew PreventerWith just one application, a boat will be protected against mold and mildew for up to 90 days. The preventer creates a covalent bond with the surface on which it is applied. Users can apply this to almost any marine surface, including vinyl seats, life jackets, canvas, ropes, compartments, live wells, bilges, patio furniture, and other areas of high moisture.Spray the Mold & Mildew Preventer onto a clean, dry surface and spread it evenly with a microfiber cloth. Remember to spread, not wipe off.STEP 4: Maintain Seats with Xanigo Marine's Waterless WashKeep the boat clean between mold prevention applications without the use of harsh chemicals or wasting water. Spray the Waterless Wash onto the seats, let it sit for 15-20 seconds, and wipe it off with a microfiber cloth. Remove sunscreen (a major food source for mold) and leave a refreshing smell without impacting the protective layer created by the mold & mildew preventer.Also, a great way to shine up a gel coat quickly!

Read more less

Biodegradable Degreaser - 32ozThe Xanigo Marine Biodegradable Degreaser is USDA-certified and powerful enough for heavy, caked-on grease and oil while being safe for the watershed and marine life. This degreaser is a bio-based formula designed to outperform most degreasers in the marketplace. With this product, boaters will have a product that's not harming the environment or wildlife. This USDA-certified formula is considered the ultimate biodegradable.Directions: Spray it on, let sit for 30-90 seconds, and then wipe it off with a rag. It's that easy!Specifications:Bottle Size: 32 ouncesThe Complete Process to Treat and Prevent Mold & Mildew on Vinyl Boat SeatsSTEP 1: Remove Mold & Mildew with Xanigo Marine's Mold & Mildew Stain RemoverXanigo Marin’s Mold & Mildew Stain Remover is a very effective way to remove mold and mildew. Being a harsh chemical, it should only be used once to remove the mold, and then the preventer should be applied to prevent the mold from coming back. Liberally apply the Mold & Mildew Stain Remover to the seats. Let it sit for 60-90 seconds but do not let it dry. An additional solution may need to be applied— keep it wet. Agitate in a circular motion with a brush to remove the mold from the pores. Rinse thoroughly with clean water.STEP 2: Neutralize the RemoverAfter rinsing the remover off with fresh water, it's important to make sure any leftover remover is neutralized so it doesn't dry out vinyl or impact stitching. Spray the Waterless Wash onto the seats and wipe it in with a microfiber cloth to neutralize the chemicals in the remover.STEP 3: Prevent Mold & Mildew with Xanigo Marine's Mold & Mildew PreventerWith just one application, a boat will be protected against mold and mildew for up to 90 days. The preventer creates a covalent bond with the surface on which it is applied. Users can apply this to almost any marine surface, including vinyl seats, life jackets, canvas, ropes, compartments, live wells, bilges, patio furniture, and other areas of high moisture.Spray the Mold & Mildew Preventer onto a clean, dry surface and spread it evenly with a microfiber cloth. Remember to spread, not wipe off.STEP 4: Maintain Seats with Xanigo Marine's Waterless WashKeep the boat clean between mold prevention applications without the use of harsh chemicals or wasting water. Spray the Waterless Wash onto the seats, let it sit for 15-20 seconds, and wipe it off with a microfiber cloth. Remove sunscreen (a major food source for mold) and leave a refreshing smell without impacting the protective layer created by the mold & mildew preventer.Also, a great way to shine up a gel coat quickly! Specifications: Type: Grease Box Dimensions: 3"H x 6"W x 10"L WT: 2.4 lbs UPC: 860007772757

Read more less

Defender Atomizer - CordedThis high-powered sprayer is designed for boat detailers to prevent mold on boat seats, life jackets, canvas, ropes, carpets, and areas with high moisture.The Xanigo Marine Mold & Mildew Preventer prevents and protects against mold and mildew for up to 90 days with just one application! No wiping!When applied with the Xanigo Marine Sprayer, this system STOPS mold and mildew cold!Features:Version with cordIncludes: 28oz canister 16 ft. cord Adjustable spray nozzle Jog wheel The Complete Process to Treat and Prevent Mold & Mildew on Vinyl Boat SeatsSTEP 1: Remove Mold & Mildew with Xanigo Marine's Mold & Mildew Stain RemoverXanigo Marin’s Mold & Mildew Stain Remover is a very effective way to remove mold and mildew. Being a harsh chemical, it should only be used once to remove the mold, and then the preventer should be applied to prevent the mold from coming back. Liberally apply the Mold & Mildew Stain Remover to the seats. Let it sit for 60-90 seconds but do not let it dry. An additional solution may need to be applied— keep it wet. Agitate in a circular motion with a brush to remove the mold from the pores. Rinse thoroughly with clean water.STEP 2: Neutralize the RemoverAfter rinsing the remover off with fresh water, it's important to make sure any leftover remover is neutralized so it doesn't dry out vinyl or impact stitching. Spray the Waterless Wash onto the seats and wipe it in with a microfiber cloth to neutralize the chemicals in the remover.STEP 3: Prevent Mold & Mildew with Xanigo Marine's Mold & Mildew PreventerWith just one application, a boat will be protected against mold and mildew for up to 90 days. The preventer creates a covalent bond with the surface on which it is applied. Users can apply this to almost any marine surface, including vinyl seats, life jackets, canvas, ropes, compartments, live wells, bilges, patio furniture, and other areas of high moisture.Spray the Mold & Mildew Preventer onto a clean, dry surface and spread it evenly with a microfiber cloth. Remember to spread, not wipe off.STEP 4: Maintain Seats with Xanigo Marine's Waterless WashKeep the boat clean between mold prevention applications without the use of harsh chemicals or wasting water. Spray the Waterless Wash onto the seats, let it sit for 15-20 seconds, and wipe it off with a microfiber cloth. Remove sunscreen (a major food source for mold) and leave a refreshing smell without impacting the protective layer created by the mold & mildew preventer.Also, a great way to shine up a gel coat quickly! Specifications: Type: Mildew & Moisture Box Dimensions: 7"H x 8"W x 11"L WT: 4.05 lbs UPC: 860007772726

Read more less

Freedom AtomizerThis high-powered sprayer is designed for boat detailers to prevent mold on boat seats, life jackets, canvas, ropes, carpets, and areas with high moisture.The Xanigo Marine Mold & Mildew Preventer prevents and protects against mold and mildew for up to 90 days with just one application! No wiping!When applied with the Xanigo Marine Sprayer, this system STOPS mold and mildew cold!Features:CordlessIncludes:Long-lasting residual protection 28oz canister 20v battery Fast charging dock Adjustable spray nozzle Jog wheel The Complete Process to Treat and Prevent Mold & Mildew on Vinyl Boat SeatsSTEP 1: Remove Mold & Mildew with Xanigo Marine's Mold & Mildew Stain RemoverXanigo Marin’s Mold & Mildew Stain Remover is a very effective way to remove mold and mildew. Being a harsh chemical, it should only be used once to remove the mold, and then the preventer should be applied to prevent the mold from coming back. Liberally apply the Mold & Mildew Stain Remover to the seats. Let it sit for 60-90 seconds but do not let it dry. An additional solution may need to be applied— keep it wet. Agitate in a circular motion with a brush to remove the mold from the pores. Rinse thoroughly with clean water.STEP 2: Neutralize the RemoverAfter rinsing the remover off with fresh water, it's important to make sure any leftover remover is neutralized so it doesn't dry out vinyl or impact stitching. Spray the Waterless Wash onto the seats and wipe it in with a microfiber cloth to neutralize the chemicals in the remover.STEP 3: Prevent Mold & Mildew with Xanigo Marine's Mold & Mildew PreventerWith just one application, a boat will be protected against mold and mildew for up to 90 days. The preventer creates a covalent bond with the surface on which it is applied. Users can apply this to almost any marine surface, including vinyl seats, life jackets, canvas, ropes, compartments, live wells, bilges, patio furniture, and other areas of high moisture.Spray the Mold & Mildew Preventer onto a clean, dry surface and spread it evenly with a microfiber cloth. Remember to spread, not wipe off.STEP 4: Maintain Seats with Xanigo Marine's Waterless WashKeep the boat clean between mold prevention applications without the use of harsh chemicals or wasting water. Spray the Waterless Wash onto the seats, let it sit for 15-20 seconds, and wipe it off with a microfiber cloth. Remove sunscreen (a major food source for mold) and leave a refreshing smell without impacting the protective layer created by the mold & mildew preventer.Also, a great way to shine up a gel coat quickly! Specifications: Type: Mildew & Moisture Box Dimensions: 7"H x 8"W x 11"L WT: 3.7 lbs

Read more less

Mold & Mildew Preventer - 1 GallonSay goodbye to mold and mildew on the boat! The Xanigo Marine Mold & Mildew Solution is here to save the day. This will prevent and protect unsightly mold and mildew on vinyl boat seats, life jackets, canvas, bumpers, carpet, and any other areas with high moisture.Simply spray the Mold & Mildew Preventer onto a clean, dry surface and spread it evenly with a microfiber towel. That's it! With just one application, the boat will be protected against mold and mildew for up to 90 days.Need help removing the mold first? Check out Xanigo Marine's Mold & Mildew Stain Remover! Features: Long-lasting residual protection World's only patented organosilane compound, which provides greater protection No alcohol and non-flammable Water-based (only water-based organosilane) Long shelf life of 1.5 years unopened, 1 year opened Specifications:Bottle Size: 32 ouncesThe Complete Process to Treat and Prevent Mold & Mildew on Vinyl Boat SeatsSTEP 1: Remove Mold & Mildew with Xanigo Marine's Mold & Mildew Stain RemoverXanigo Marin’s Mold & Mildew Stain Remover is a very effective way to remove mold and mildew. Being a harsh chemical, it should only be used once to remove the mold, and then the preventer should be applied to prevent the mold from coming back. Liberally apply the Mold & Mildew Stain Remover to the seats. Let it sit for 60-90 seconds but do not let it dry. An additional solution may need to be applied— keep it wet. Agitate in a circular motion with a brush to remove the mold from the pores. Rinse thoroughly with clean water.STEP 2: Neutralize the RemoverAfter rinsing the remover off with fresh water, it's important to make sure any leftover remover is neutralized so it doesn't dry out vinyl or impact stitching. Spray the Waterless Wash onto the seats and wipe it in with a microfiber cloth to neutralize the chemicals in the remover.STEP 3: Prevent Mold & Mildew with Xanigo Marine's Mold & Mildew PreventerWith just one application, a boat will be protected against mold and mildew for up to 90 days. The preventer creates a covalent bond with the surface on which it is applied. Users can apply this to almost any marine surface, including vinyl seats, life jackets, canvas, ropes, compartments, live wells, bilges, patio furniture, and other areas of high moisture.Spray the Mold & Mildew Preventer onto a clean, dry surface and spread it evenly with a microfiber cloth. Remember to spread, not wipe off.STEP 4: Maintain Seats with Xanigo Marine's Waterless WashKeep the boat clean between mold prevention applications without the use of harsh chemicals or wasting water. Spray the Waterless Wash onto the seats, let it sit for 15-20 seconds, and wipe it off with a microfiber cloth. Remove sunscreen (a major food source for mold) and leave a refreshing smell without impacting the protective layer created by the mold & mildew preventer.Also, a great way to shine up a gel coat quickly! Specifications: Type: Mildew & Moisture Box Dimensions: 6"H x 6"W x 12"L WT: 8.6 lbs UPC: 860007772719

Read more less

Marine Mold & Mildew Preventer - 1qtSay goodbye to mold and mildew on the boat! The Xanigo Marine Mold & Mildew Solution is here to save the day. This will prevent and protect unsightly mold and mildew on vinyl boat seats, life jackets, canvas, bumpers, carpet, and any other areas with high moisture.Simply spray the Mold & Mildew Preventer onto a clean, dry surface and spread it evenly with a microfiber towel. That's it! With just one application, the boat will be protected against mold and mildew for up to 90 days.Need help removing the mold first? Check out Xanigo Marine's Mold & Mildew Stain Remover! Features: Long-lasting residual protection World's only patented organosilane compound, which provides greater protection No alcohol and non-flammable Water-based (only water-based organosilane) Long shelf life Specifications:Bottle Size: 32 ouncesThe Complete Process to Treat and Prevent Mold & Mildew on Vinyl Boat SeatsSTEP 1: Remove Mold & Mildew with Xanigo Marine's Mold & Mildew Stain RemoverXanigo Marin’s Mold & Mildew Stain Remover is a very effective way to remove mold and mildew. Being a harsh chemical, it should only be used once to remove the mold, and then the preventer should be applied to prevent the mold from coming back. Liberally apply the Mold & Mildew Stain Remover to the seats. Let it sit for 60-90 seconds but do not let it dry. An additional solution may need to be applied— keep it wet. Agitate in a circular motion with a brush to remove the mold from the pores. Rinse thoroughly with clean water.STEP 2: Neutralize the RemoverAfter rinsing the remover off with fresh water, it's important to make sure any leftover remover is neutralized so it doesn't dry out vinyl or impact stitching. Spray the Waterless Wash onto the seats and wipe it in with a microfiber cloth to neutralize the chemicals in the remover.STEP 3: Prevent Mold & Mildew with Xanigo Marine's Mold & Mildew PreventerWith just one application, a boat will be protected against mold and mildew for up to 90 days. The preventer creates a covalent bond with the surface on which it is applied. Users can apply this to almost any marine surface, including vinyl seats, life jackets, canvas, ropes, compartments, live wells, bilges, patio furniture, and other areas of high moisture.Spray the Mold & Mildew Preventer onto a clean, dry surface and spread it evenly with a microfiber cloth. Remember to spread, not wipe off.STEP 4: Maintain Seats with Xanigo Marine's Waterless WashKeep the boat clean between mold prevention applications without the use of harsh chemicals or wasting water. Spray the Waterless Wash onto the seats, let it sit for 15-20 seconds, and wipe it off with a microfiber cloth. Remove sunscreen (a major food source for mold) and leave a refreshing smell without impacting the protective layer created by the mold & mildew preventer.Also, a great way to shine up a gel coat quickly! Specifications: Type: Mildew & Moisture Box Dimensions: 4"H x 4"W x 10"L WT: 2.25 lbs UPC: 860007772702

Read more less