BPS-8 8-Transducer Ultrasonic Antifouling System - 12VDCThe BPS-8 is an eight-transducer system that can add antifouling protection to hulls, drives, rudders, stabilizers, and more. This single system can provide ultrasonic antifouling protection for hulls up to 80ft in length or can be combined with additional systems for larger vessels. The BPS-8 is also the perfect solution for vessels under 52' with inboards or sail drives to have one system covering the entire vessel.The BPS-8 Package Includes: 1x BPS-8 Control Module with Integrated Power Cable 8x Submersible Ultrasonic Transducers with 15ft of Cable 4x Additional 15ft Extension Cables 2x Epoxy Kits 1x Printed Installation and Operation Manual Specifications: Voltage: 12V or 24V DC Average Power Draw: 2Ah Transducer Strength: 60W Cable Length: 15ft per transducer Frequency: Multi-frequency ultrasonic sweep algorithm (20kHz-42kHz) Installation Overview: No Thru-Hulls: The transducers are installed directly on top of your hull surface using the provided epoxy. Install Signal Cable: Each transducer has 15ft of connected signal cable. This ensures an easy installation from the transducer to the controller. Mounting the Controller: The BPS-1 Controller runs off of your boat's existing house battery. It is a simple 2-wire connection the the battery bank or distribution panel. Enjoy Worry-Free Boating: That's it! Your BPS system is done! Let our advanced antifouling protection do its job. Each system is programmed with a multi-frequency sweeping algorithm to ensure that your boat has the best antifouling protection on the market. How the Technology Works: The Mechanism: The system emits high-frequency ultrasonic waves through the hull & drives, creating a microscopic barrier of resonance. Targeting the Root Cause: These ultrasound waves repel biofouling from attaching to your hull before they ever have the chance to attach. Eco-Friendly: 100% chemical-free. It does not leach pollutants into the water, making it safe for marinas with strict environmental regulations. Marine Life Safe: The frequencies used are outside the hearing range of marine mammals and humans. Benefits: Fuel Efficiency: A clean hull creates less drag. Maintaining hull smoothness ensures you get the best possible MPG and top speed. Reduced Maintenance Costs: Significantly extends the life of your bottom paint and reduces the frequency of expensive haul-outs. Diver Savings: Reduces the need for monthly hull cleaning services. Hard-to-Reach Protection: Unlike paint, ultrasonic waves resonate through complex parts that are difficult to paint and clean, such as stern drives, sea strainers, and rudders. Fit & Forget: Once installed, the system runs automatically with zero scheduled maintenance required. This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

BPS-4 4-Transducer Ultrasonic Antifouling System - 12VDCThe BPS-4 is a four-transducer system that can add antifouling protection to hulls, drives, rudders, stabilizers, and more. This single system can provide ultrasonic antifouling protection for hulls up to 50ft in length or can be combined with additional systems for larger vessels. The BPS-4 can also be tasked with protecting drives and rudders.The BPS-4 Package Includes: 1x BPS-4 Control Module with Integrated Power Cable 4x Submersible Ultrasonic Transducers with 15ft of Cable 2x Additional 15ft Extension Cables 1x Epoxy Kit 1x Printed Installation and Operation Manual Specifications: Voltage: 12V or 24V DC Average Power Draw: 1Ah Transducer Strength: 60W Cable Length: 15ft per transducer Frequency: Multi-frequency ultrasonic sweep algorithm (20kHz-42kHz) Installation Overview: No Thru-Hulls: The transducers are installed directly on top of your hull surface using the provided epoxy. Install Signal Cable: Each transducer has 15ft of connected signal cable. This ensures an easy installation from the transducer to the controller. Mounting the Controller: The BPS-1 Controller runs off of your boat's existing house battery. It is a simple 2-wire connection the the battery bank or distribution panel. Enjoy Worry-Free Boating: That's it! Your BPS system is done! Let our advanced antifouling protection do its job. Each system is programmed with a multi-frequency sweeping algorithm to ensure that your boat has the best antifouling protection on the market. How the Technology Works: The Mechanism: The system emits high-frequency ultrasonic waves through the hull & drives, creating a microscopic barrier of resonance. Targeting the Root Cause: These ultrasound waves repel biofouling from attaching to your hull before they ever have the chance to attach. Eco-Friendly: 100% chemical-free. It does not leach pollutants into the water, making it safe for marinas with strict environmental regulations. Marine Life Safe: The frequencies used are outside the hearing range of marine mammals and humans. Benefits: Fuel Efficiency: A clean hull creates less drag. Maintaining hull smoothness ensures you get the best possible MPG and top speed. Reduced Maintenance Costs: Significantly extends the life of your bottom paint and reduces the frequency of expensive haul-outs. Diver Savings: Reduces the need for monthly hull cleaning services. Hard-to-Reach Protection: Unlike paint, ultrasonic waves resonate through complex parts that are difficult to paint and clean, such as stern drives, sea strainers, and rudders. Fit & Forget: Once installed, the system runs automatically with zero scheduled maintenance required. This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

BPS-6 6-Transducer Ultrasonic Antifouling System - 12VDCThe BPS-6 is a six-transducer system that can add antifouling protection to hulls, drives, rudders, stabilizers, and more. This single system can provide ultrasonic antifouling protection for hulls up to 65ft in length or can be combined with additional systems for larger vessels. The BPS-6 is also the perfect solution for vessels under 52' with pods or stern drives to have one system covering the entire vessel.The BPS-6 Package Includes: 1x BPS-6 Control Module with Integrated Power Cable 6x Submersible Ultrasonic Transducers with 15ft of Cable 3x Additional 15ft Extension Cables 2x Epoxy Kits 1x Printed Installation and Operation Manual Specifications: Voltage: 12V or 24V DC Average Power Draw: 1.5Ah Transducer Strength: 60W Cable Length: 15ft per transducer Frequency: Multi-frequency ultrasonic sweep algorithm (20kHz-42kHz) Installation Overview: No Thru-Hulls: The transducers are installed directly on top of your hull surface using the provided epoxy. Install Signal Cable: Each transducer has 15ft of connected signal cable. This ensures an easy installation from the transducer to the controller. Mounting the Controller: The BPS-1 Controller runs off of your boat's existing house battery. It is a simple 2-wire connection the the battery bank or distribution panel. Enjoy Worry-Free Boating: That's it! Your BPS system is done! Let our advanced antifouling protection do its job. Each system is programmed with a multi-frequency sweeping algorithm to ensure that your boat has the best antifouling protection on the market. How the Technology Works: The Mechanism: The system emits high-frequency ultrasonic waves through the hull & drives, creating a microscopic barrier of resonance. Targeting the Root Cause: These ultrasound waves repel biofouling from attaching to your hull before they ever have the chance to attach. Eco-Friendly: 100% chemical-free. It does not leach pollutants into the water, making it safe for marinas with strict environmental regulations. Marine Life Safe: The frequencies used are outside the hearing range of marine mammals and humans. Benefits: Fuel Efficiency: A clean hull creates less drag. Maintaining hull smoothness ensures you get the best possible MPG and top speed. Reduced Maintenance Costs: Significantly extends the life of your bottom paint and reduces the frequency of expensive haul-outs. Diver Savings: Reduces the need for monthly hull cleaning services. Hard-to-Reach Protection: Unlike paint, ultrasonic waves resonate through complex parts that are difficult to paint and clean, such as stern drives, sea strainers, and rudders. Fit & Forget: Once installed, the system runs automatically with zero scheduled maintenance required. This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

PRO-6 6-Transducer Ultrasonic Antifouling System - 24VDCThe PRO-6 is a six-transducer system that can add antifouling protection to hulls, drives, rudders, stabilizers, and more. This single system can provide ultrasonic antifouling protection for hulls up to 75ft in length or can be combined with additional systems for larger vessels. The PRO-6 is also the perfect solution for vessels under 60' with pods or stern drives to have one system covering the entire vessel.The PRO-6 Package Includes: 1x PRO-6 Control Module with Integrated Power Cable 6x Submersible Ultrasonic Transducers with 15ft of Cable 3x Additional 15ft Extension Cables 2x Epoxy Kits 1x Printed Installation and Operation Manual Specifications: Voltage: 24V DC Average Power Draw: 1.5Ah Transducer Strength: 120W Cable Length: 15ft per transducer Frequency: Multi-frequency ultrasonic sweep algorithm (20kHz-42kHz) Installation Overview: No Thru-Hulls: The transducers are installed directly on top of your hull surface using the provided epoxy. Install Signal Cable: Each transducer has 15ft of connected signal cable. This ensures an easy installation from the transducer to the controller. Mounting the Controller: The BPS-1 Controller runs off of your boat's existing house battery. It is a simple 2-wire connection the the battery bank or distribution panel. Enjoy Worry-Free Boating: That's it! Your BPS system is done! Let our advanced antifouling protection do its job. Each system is programmed with a multi-frequency sweeping algorithm to ensure that your boat has the best antifouling protection on the market. How the Technology Works: The Mechanism: The system emits high-frequency ultrasonic waves through the hull & drives, creating a microscopic barrier of resonance. Targeting the Root Cause: These ultrasound waves repel biofouling from attaching to your hull before they ever have the chance to attach. Eco-Friendly: 100% chemical-free. It does not leach pollutants into the water, making it safe for marinas with strict environmental regulations. Marine Life Safe: The frequencies used are outside the hearing range of marine mammals and humans. Benefits: Fuel Efficiency: A clean hull creates less drag. Maintaining hull smoothness ensures you get the best possible MPG and top speed. Reduced Maintenance Costs: Significantly extends the life of your bottom paint and reduces the frequency of expensive haul-outs. Diver Savings: Reduces the need for monthly hull cleaning services. Hard-to-Reach Protection: Unlike paint, ultrasonic waves resonate through complex parts that are difficult to paint and clean, such as stern drives, sea strainers, and rudders. Fit & Forget: Once installed, the system runs automatically with zero scheduled maintenance required. This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

PRO-8 8-Transducer Ultrasonic Antifouling System - 24VDCThe BPS-8 is an eight-transducer system that can add antifouling protection to hulls, drives, rudders, stabilizers, and more. This single system can provide ultrasonic antifouling protection for hulls up to 80ft in length or can be combined with additional systems for larger vessels. The BPS-8 is also the perfect solution for vessels under 52' with inboards or sail drives to have one system covering the entire vessel.The PRO-8 Package Includes: 1x BPS-8 Control Module with Integrated Power Cable 8x Submersible Ultrasonic Transducers with 15ft of Cable 4x Additional 15ft Extension Cables 2x Epoxy Kits 1x Printed Installation and Operation Manual Specifications: Voltage: 12V & 24V DC Average Power Draw: 2Ah Transducer Strength: 60W Cable Length: 15ft per transducer Frequency: Multi-frequency ultrasonic sweep algorithm (20kHz-42kHz) Installation Overview: No Thru-Hulls: The transducers are installed directly on top of your hull surface using the provided epoxy. Install Signal Cable: Each transducer has 15ft of connected signal cable. This ensures an easy installation from the transducer to the controller. Mounting the Controller: The BPS-1 Controller runs off of your boat's existing house battery. It is a simple 2-wire connection the the battery bank or distribution panel. Enjoy Worry-Free Boating: That's it! Your BPS system is done! Let our advanced antifouling protection do its job. Each system is programmed with a multi-frequency sweeping algorithm to ensure that your boat has the best antifouling protection on the market. How the Technology Works: The Mechanism: The system emits high-frequency ultrasonic waves through the hull & drives, creating a microscopic barrier of resonance. Targeting the Root Cause: These ultrasound waves repel biofouling from attaching to your hull before they ever have the chance to attach. Eco-Friendly: 100% chemical-free. It does not leach pollutants into the water, making it safe for marinas with strict environmental regulations. Marine Life Safe: The frequencies used are outside the hearing range of marine mammals and humans. Benefits: Fuel Efficiency: A clean hull creates less drag. Maintaining hull smoothness ensures you get the best possible MPG and top speed. Reduced Maintenance Costs: Significantly extends the life of your bottom paint and reduces the frequency of expensive haul-outs. Diver Savings: Reduces the need for monthly hull cleaning services. Hard-to-Reach Protection: Unlike paint, ultrasonic waves resonate through complex parts that are difficult to paint and clean, such as stern drives, sea strainers, and rudders. Fit & Forget: Once installed, the system runs automatically with zero scheduled maintenance required. This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

BPS-2 2-Transducer Ultrasonic Antifouling System - 12VDCThe BPS-2 is a two-transducer system that can add antifouling protection to hulls, drives, rudders, stabilizers, and more. This single system can provide ultrasonic antifouling protection for hulls up to 30ft in length or can be combined with additional systems for larger vessels. The BPS-2 can also be tasked with protecting drives and rudders.The BPS-2 Package Includes: 1x BPS-2 Control Module with Integrated Power Cable 2x Submersible Ultrasonic Transducers with 15ft of Cable 1x Epoxy Kit 1x Printed Installation and Operation Manual Specifications: Voltage: 12V or 24V DC Average Power Draw: 0.5Ah Transducer Strength: 60W Cable Length: 15ft per transducer Frequency: Multi-frequency ultrasonic sweep algorithm (20kHz-42kHz) Installation Overview: No Thru-Hulls: The transducers are installed directly on top of your hull surface using the provided epoxy. Install Signal Cable: Each transducer has 15ft of connected signal cable. This ensures an easy installation from the transducer to the controller. Mounting the Controller: The BPS-1 Controller runs off of your boat's existing house battery. It is a simple 2-wire connection the the battery bank or distribution panel. Enjoy Worry-Free Boating: That's it! Your BPS system is done! Let our advanced antifouling protection do its job. Each system is programmed with a multi-frequency sweeping algorithm to ensure that your boat has the best antifouling protection on the market. How the Technology Works: The Mechanism: The system emits high-frequency ultrasonic waves through the hull & drives, creating a microscopic barrier of resonance. Targeting the Root Cause: These ultrasound waves repel biofouling from attaching to your hull before they ever have the chance to attach. Eco-Friendly: 100% chemical-free. It does not leach pollutants into the water, making it safe for marinas with strict environmental regulations. Marine Life Safe: The frequencies used are outside the hearing range of marine mammals and humans. Benefits: Fuel Efficiency: A clean hull creates less drag. Maintaining hull smoothness ensures you get the best possible MPG and top speed. Reduced Maintenance Costs: Significantly extends the life of your bottom paint and reduces the frequency of expensive haul-outs. Diver Savings: Reduces the need for monthly hull cleaning services. Hard-to-Reach Protection: Unlike paint, ultrasonic waves resonate through complex parts that are difficult to paint and clean, such as stern drives, sea strainers, and rudders. Fit & Forget: Once installed, the system runs automatically with zero scheduled maintenance required. This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

BPS-1 1-Transducer Ultrasonic Antifouling System - 12VDCThe BPS-1 is a single transducer system that can add antifouling protection to hulls, drives, rudders, stabilizers, and more. This single system can provide ultrasonic antifouling protection for hulls up to 20ft in length or can be combined with additional systems for larger vessels. The BPS-1 can also be tasked with protecting drives and rudders.The BPS-1 Package Includes: 1x BPS-1 Control Module with Integrated Power Cable 1x Submersible Ultrasonic Transducers with 15ft of Cable 1x Epoxy Kit 1x Printed Installation and Operation Manual Specifications: Voltage: 12V or 24V DC Average Power Draw: 0.25Ah Transducer Strength: 60W Cable Length: 15ft per transducer Frequency: Multi-frequency ultrasonic sweep algorithm (20kHz-42kHz) Installation Overview: No Thru-Hulls: The transducers are installed directly on top of your hull surface using the provided epoxy. Install Signal Cable: Each transducer has 15ft of connected signal cable. This ensures an easy installation from the transducer to the controller. Mounting the Controller: The BPS-1 Controller runs off of your boat's existing house battery. It is a simple 2-wire connection the the battery bank or distribution panel. Enjoy Worry-Free Boating: That's it! Your BPS system is done! Let our advanced antifouling protection do its job. Each system is programmed with a multi-frequency sweeping algorithm to ensure that your boat has the best antifouling protection on the market. How the Technology Works: The Mechanism: The system emits high-frequency ultrasonic waves through the hull & drives, creating a microscopic barrier of resonance. Targeting the Root Cause: These ultrasound waves repel biofouling from attaching to your hull before they ever have the chance to attach. Eco-Friendly: 100% chemical-free. It does not leach pollutants into the water, making it safe for marinas with strict environmental regulations. Marine Life Safe: The frequencies used are outside the hearing range of marine mammals and humans. Benefits: Fuel Efficiency: A clean hull creates less drag. Maintaining hull smoothness ensures you get the best possible MPG and top speed. Reduced Maintenance Costs: Significantly extends the life of your bottom paint and reduces the frequency of expensive haul-outs. Diver Savings: Reduces the need for monthly hull cleaning services. Hard-to-Reach Protection: Unlike paint, ultrasonic waves resonate through complex parts that are difficult to paint and clean, such as stern drives, sea strainers, and rudders. Fit & Forget: Once installed, the system runs automatically with zero scheduled maintenance required. This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

PRO-4 4-Transducer Ultrasonic Antifouling System - 24VDCThe PRO-4 is a four-transducer system that can add antifouling protection to hulls, drives, rudders, stabilizers, and more. This single system can provide ultrasonic antifouling protection for hulls up to 60ft in length or can be combined with additional systems for larger vessels. The PRO-4 can also be tasked with protecting drives and rudders.The PRO-4 Package Includes: 1x PRO-4 Control Module with Integrated Power Cable 4x Submersible Ultrasonic Transducers with 15ft of Cable 2x Additional 15ft Extension Cables 1x Epoxy Kit 1x Printed Installation and Operation Manual Specifications: Voltage: 24V DC Average Power Draw: 1Ah Transducer Strength: 120W Cable Length: 15ft per transducer Frequency: Multi-frequency ultrasonic sweep algorithm (20kHz-42kHz) Installation Overview: No Thru-Hulls: The transducers are installed directly on top of your hull surface using the provided epoxy. Install Signal Cable: Each transducer has 15ft of connected signal cable. This ensures an easy installation from the transducer to the controller. Mounting the Controller: The BPS-1 Controller runs off of your boat's existing house battery. It is a simple 2-wire connection the the battery bank or distribution panel. Enjoy Worry-Free Boating: That's it! Your BPS system is done! Let our advanced antifouling protection do its job. Each system is programmed with a multi-frequency sweeping algorithm to ensure that your boat has the best antifouling protection on the market. How the Technology Works: The Mechanism: The system emits high-frequency ultrasonic waves through the hull & drives, creating a microscopic barrier of resonance. Targeting the Root Cause: These ultrasound waves repel biofouling from attaching to your hull before they ever have the chance to attach. Eco-Friendly: 100% chemical-free. It does not leach pollutants into the water, making it safe for marinas with strict environmental regulations. Marine Life Safe: The frequencies used are outside the hearing range of marine mammals and humans. Benefits: Fuel Efficiency: A clean hull creates less drag. Maintaining hull smoothness ensures you get the best possible MPG and top speed. Reduced Maintenance Costs: Significantly extends the life of your bottom paint and reduces the frequency of expensive haul-outs. Diver Savings: Reduces the need for monthly hull cleaning services. Hard-to-Reach Protection: Unlike paint, ultrasonic waves resonate through complex parts that are difficult to paint and clean, such as stern drives, sea strainers, and rudders. Fit & Forget: Once installed, the system runs automatically with zero scheduled maintenance required. This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

PRO-2 2-Transducer Ultrasonic Antifouling System - 24VDCThe PRO-2 is a two-transducer system that can add antifouling protection to hulls, drives, rudders, stabilizers, and more. This single system can provide ultrasonic antifouling protection for hulls up to 40ft in length or can be combined with additional systems for larger vessels. The PRO-2 can also be tasked with protecting drives and rudders.The PRO-2 Package Includes: 1x PRO-2 Control Module with Integrated Power Cable 2x Submersible Ultrasonic Transducers with 15ft of Cable 1x Epoxy Kit 1x Printed Installation and Operation Manual Specifications: Voltage: 24V DC Average Power Draw: 0.5Ah Transducer Strength: 120W Cable Length: 15ft per transducer Frequency: Multi-frequency ultrasonic sweep algorithm (20kHz-42kHz) Installation Overview: No Thru-Hulls: The transducers are installed directly on top of your hull surface using the provided epoxy. Install Signal Cable: Each transducer has 15ft of connected signal cable. This ensures an easy installation from the transducer to the controller. Mounting the Controller: The BPS-1 Controller runs off of your boat's existing house battery. It is a simple 2-wire connection the the battery bank or distribution panel. Enjoy Worry-Free Boating: That's it! Your BPS system is done! Let our advanced antifouling protection do its job. Each system is programmed with a multi-frequency sweeping algorithm to ensure that your boat has the best antifouling protection on the market. How the Technology Works: The Mechanism: The system emits high-frequency ultrasonic waves through the hull & drives, creating a microscopic barrier of resonance. Targeting the Root Cause: These ultrasound waves repel biofouling from attaching to your hull before they ever have the chance to attach. Eco-Friendly: 100% chemical-free. It does not leach pollutants into the water, making it safe for marinas with strict environmental regulations. Marine Life Safe: The frequencies used are outside the hearing range of marine mammals and humans. Benefits: Fuel Efficiency: A clean hull creates less drag. Maintaining hull smoothness ensures you get the best possible MPG and top speed. Reduced Maintenance Costs: Significantly extends the life of your bottom paint and reduces the frequency of expensive haul-outs. Diver Savings: Reduces the need for monthly hull cleaning services. Hard-to-Reach Protection: Unlike paint, ultrasonic waves resonate through complex parts that are difficult to paint and clean, such as stern drives, sea strainers, and rudders. Fit & Forget: Once installed, the system runs automatically with zero scheduled maintenance required. This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

Lightspeed Light Foul-Release Coating Covers Approximately 4 Lights Underwater LightsMore Light. Less Fuss. Keep your lights shining bright all season long. Underwater lights are just as susceptible to marine fouling as any other underwater surface which can result in reduced visible light, and efforts to remove barnacles can result in damaged lighting components. Lightspeed is a transparent coating that is an easy and affordable way for boat owners to reduce maintenance, protect their investment, and maintain lighting system performance. Lightspeed has been shown to save three times its retail value in maintenance costs, on top of the unquantifiable damage to marine ecosystems caused by traditional antifouling products. Features: Lightspeed is a transparent coating that is an easy and affordable way for boat owners to reduce maintenance, protect their investment, and maintain lighting system performance Don’t risk damage to delicate components caused by scraping away hard marine growth Lightspeed also promises worry-free 12-24 months with reduced maintenance Lightspeed protects your aesthetic features, while not interfering with the light transmittance Endorsed and tested by Lumishore to ensure there is no drop in lumen output, no shift in color nor adverse effects on the lighting system performance Technical Specifications:Coverage Rate - 1ft² (four (4) average size underwater lights)In the Box: Lightclean wipe Application brush Lightspeed Clear Coat - 15ml *Sold as an Individual

Read more less

Foulfree Transducer Coating Formulated by industry-leading scientists and certified by Airmar for transducers.   Fouling on the face of transducers can reduce their sensitivity, bottom-echo returns and positive fish targets.  It can also increase the turbulence over the face of the transducer causing aeration and loss of bottom contact.  Foulfree keeps transducers clean and operating at the top of their game for the clearest sonar images possible.  The proprietary clear coat forms a slick surface that marine growth can’t grab onto, keeping your transducer surface clean and clear. Features: Foulfree™ is simple to apply and lasts for 12-24 months Transducer safe - Airmar certifies that Foulfree™ coating on its transducers results in no loss in transducer performance Biocide Free - Foul-release, not antifoul.  Foul-release coatings use physical means to reduce fouling, creating a surface that’s tough for marine organisms to adhere to Easy to apply A foul-free transducer equals more clarity, detail, and visibility below the waterline. Technical Specifications: Coverage Rate - 1ft² (two (2) average size transducers) In the Box: Abrasive pad XDclean wipe XDprime, wipe Applicator brush Foulfree Clear coat - 15ml *Sold as an IndividualThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Type: Service Kits Box Dimensions: 2"H x 2"W x 6"L WT: 0.15 lbs UPC: 9421903335425 Quick Guide (pdf)

Read more less

Primer - 240mlPart of a two-component 4:1 etching primer. Once mixed with the PropOne Activator, the Primer chemically dries to protect metallic surfaces against corrosion and allow adhesion of the PropOne Clear Coat. Suitable for ferrous & non-ferrous metals.NOTE: This product is the PropOne Primer only. Other components are sold separately.PropOne is a non-toxic foul-release coating that prevents sea life from adhering to propellers and underwater running gear.  It is used on thousands of boats worldwide every year, with a proven track record of over 8 years. Non-stick, super slick coating that lasts 1-2 years in water! It works, it’s the one. No.1 Foul release coating for propellers and running gear. Proven season after season to keep your propellers and running gear clean. PropOne is used on many thousands of boats worldwide every year, with a proven track record of over 8 years.

Read more less

Activator - 60mlPart of a two-component 4:1 etching primer. Once mixed with the PropOne Primer Coat, the Primer chemically dries to protect metallic surfaces against corrosion and allow adhesion of the PropOne Clear Coat. Suitable for ferrous & non-ferrous metals.NOTE: This product is the PropOne Primer Activator only. Other components are sold separately.PropOne is a non-toxic foul-release coating that prevents sea life from adhering to propellers and underwater running gear.  It is used on thousands of boats worldwide every year, with a proven track record of over 8 years. Non-stick, super slick coating that lasts 1-2 years in water! It works, it’s the one. No.1 Foul release coating for propellers and running gear. Proven season after season to keep your propellers and running gear clean. PropOne is used on many thousands of boats worldwide every year, with a proven track record of over 8 years.

Read more less

Clear Coat - 400mlPropOne Clear Coat is part of the PropOne System. The Clear Coat is a non-biocidal, low surface energy coating which prevents organisms from strongly adhering to the surface of the propeller and running gear components permanently immersed in water. The Clear Coat does not prevent marine growth by leaching biocides into the environment.NOTE: This product is the PropOne Clear Coat only. Other components are sold separately.PropOne is a non-toxic foul-release coating that prevents sea life from adhering to propellers and underwater running gear.  It is used on thousands of boats worldwide every year, with a proven track record of over 8 years. Non-stick, super slick coating that lasts 1-2 years in water! It works, it’s the one. No.1 Foul release coating for propellers and running gear. Proven season after season to keep your propellers and running gear clean. PropOne is used on many thousands of boats worldwide every year, with a proven track record of over 8 years.

Read more less

Underwater Light Coating (ULC) 70mlKeep Your Lights Bright and Clean. PropOne ULC is an optically clear, foul-release coating that prevents organisms from adhering strongly to underwater light lenses.With minimal maintenance and a simple, one-coat application process, you’ll spend less time cleaning your lights and more time enjoying them.The ULC can be applied to glass and polyamide lenses as well as surrounding brass and plastic/composite light fittings. When not in use, the surface will become colonized by encrusting organisms, but they can be easily removed by cleaning with a soft sponge or wiping with a gloved hand.The ULC does not chemically poison the environment to prevent marine growth.

Read more less

Silicone Remover - 200mlRemove old PropOne coatings from your propellers and running gear with ease using PropOne Paint Stripper and Silicone Remover.Features: Easy application – Brush on and it will do the rest! Reduce dust and noise – Easy removal Effectively allows multiple stubborn layers to be removed Marine Grade: DCM & NMP free* PropOne Silicone Remover is designed to remove PropOne Clear Coat. It can also be used as a general-purpose silicone remover to remove thin coatings.PropOne Paint Stripper will remove paints, varnishes, and lacquers. It is primarily to be used with PropOne Silicone Remover for the removal of PropOne Primer Coat.Do not use on plastic surfaces or resin-impregnated wood fibreboard materials.For plastics and other delicate surfaces, test a small area first to ensure Silicone Remover & Paint Stripper does not affect the underlying substrate.Application: Remove all marine growth from the surface. Apply Silicone Remover approximately. 2mm thick using a brush. Tip: Prevent drying out by covering the treated area with cling wrap in hot/windy climates. Do not allow the remover to come in contact with water.  Leave in contact for 2-3 hours or until softened. Remove with a stiff nylon or wire brush, scrubbing in a circular motion. Wipe off any remaining residue with a xylene or toluene-soaked cloth. If any coating remains after scraping, apply a second coat. Once done, proceed with Paint Stripper *Does not contain toxic Dichloromethane and N-Methylpyrrolldone

Read more less

Kit - 1 LitreKeep your props cleaner for longer. Make the switch to PropOne. The No.1 foul-release coating for propellers and running gear. Since 2012, PropOne has built a loyal, growing following. One boat at a time. PropOne is now applied to thousands of boats globally every year, with a proven track record of over 10+ years.Features: Most popular with our professional applicators Coverage: 2 x 48-inch propellers and running gear Contents: 2 x 240mL Primer Coat 2 x 60mL Primer Activator 1 x 400mL Clear Coat 4 x Prop Wash Wipes 2 x Stirring Sticks Owner's Manual (pdf)Brochure (pdf)

Read more less

Kit - 500mlKeep your props cleaner for longer. Make the switch to PropOne. The No.1 foul-release coating for propellers and running gear. Since 2012, PropOne has built a loyal, growing following. One boat at a time. PropOne is now applied to thousands of boats globally every year, with a proven track record of over 10+ years.Features: Most popular with twin shaft boats Coverage: 2 x 36-inch propellers and running gear Contents: 2 x 120mL Primer Coat 2 x 30mL Primer Activator 1 x 200mL Clear Coat 2 x Prop Wash Wipes 2 x Stirring Sticks Owner's Manual (pdf)Brochure (pdf)

Read more less

Kit - 250mlKeep your props cleaner for longer. Make the switch to PropOne. The No.1 foul-release coating for propellers and running gear. Since 2012, PropOne has built a loyal, growing following. One boat at a time. PropOne is now applied to thousands of boats globally every year, with a proven track record of over 10+ years.Features: Most popular with DIY users Coverage: 2 x 24 inch propellers Contents: 1 x 120mL Primer Coat 1 x 30mL Primer Activator 1 x 100mL Clear Coat 1 x Prop Wash Wipe 1 x Stirring Stick Owner's Manual (pdf)Brochure (pdf)

Read more less

Prop & Running Gear Coating Kit - Large - 1250mlPropGlide™ is a foul-release coating that when applied to your propeller(s) and running gear will increase fuel efficiency and the performance of any vessel. This super slick coating keeps your propellers clean from marine growth for extended periods of time. Gain the advantages by applying PropGlide™ to your vessel.PropGlide™ is available in four easy-to-use size kits. The Sailboat Kit makes it affordable for all boat sizes. Get over 25% more product with 30% savings over competitive brands.Increase in Prop Speed Means a Faster VesselPropGlide™ dramatically reduces drag on the propeller and running gear caused by even the smallest fouling. Since growth is unable to attach to PropGlide™ you will achieve higher RPM and vessel speed.Improved Fuel EfficiencyClean props and running gear provide more efficiencies to the engine and less fuel is burned and money saved!Biocide-Free and Environmentally FriendlyPropGlide™ is not a prop antifoulant, it is a foul release coating. It contains no harmful biocides, and performs because it is a super slick coating!Ease of ApplicationPropGlide™ is easy to apply for Do-It-Yourselfer's and not just for the professional applicator.Contains: 2 - 300ML Primer Base 2 - 75ML Primer Hardener 2 - 250ML Clear Topcoat This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Brochure (pdf)

Read more less

Prop & Running Gear Coating Kit - Small - 250mlPropGlide™ is a foul-release coating that when applied to your propeller(s) and running gear will increase fuel efficiency and the performance of any vessel. This super slick coating keeps your propellers clean from marine growth for extended periods of time. Gain the advantages by applying PropGlide™ to your vessel.PropGlide™ is available in four easy-to-use size kits. The Sailboat Kit makes it affordable for all boat sizes. Get over 25% more product with 30% savings over competitive brands.Increase in Prop Speed Means a Faster VesselPropGlide™ dramatically reduces drag on the propeller and running gear caused by even the smallest fouling. Since growth is unable to attach to PropGlide™ you will achieve higher RPM and vessel speed.Improved Fuel EfficiencyClean props and running gear provide more efficiencies to the engine and less fuel is burned and money saved!Biocide-Free and Environmentally FriendlyPropGlide™ is not a prop antifoulant, it is a foul release coating. It contains no harmful biocides, and performs because it is a super slick coating!Ease of ApplicationPropGlide™ is easy to apply for Do-It-Yourselfer's and not just for the professional applicator.Contains: 120ML Primer Base 30ML Primer Hardener 100ML Clear Topcoat This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Brochure (pdf)

Read more less

Prop & Running Gear Coating Kit - Medium - 625mlPropGlide™ is a foul-release coating that when applied to your propeller(s) and running gear will increase fuel efficiency and the performance of any vessel. This super slick coating keeps your propellers clean from marine growth for extended periods of time. Gain the advantages by applying PropGlide™ to your vessel.PropGlide™ is available in four easy-to-use size kits. The Sailboat Kit makes it affordable for all boat sizes. Get over 25% more product with 30% savings over competitive brands.Increase in Prop Speed Means a Faster VesselPropGlide™ dramatically reduces drag on the propeller and running gear caused by even the smallest fouling. Since growth is unable to attach to PropGlide™ you will achieve higher RPM and vessel speed.Improved Fuel EfficiencyClean props and running gear provide more efficiencies to the engine and less fuel is burned and money saved!Biocide-Free and Environmentally FriendlyPropGlide™ is not a prop antifoulant, it is a foul release coating. It contains no harmful biocides, and performs because it is a super slick coating!Ease of ApplicationPropGlide™ is easy to apply for Do-It-Yourselfer's and not just for the professional applicator.Contains: 300ML Primer Base 75ML Primer Hardener 250ML Clear Topcoat This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Brochure (pdf)

Read more less

Prop & Running Gear Coating Kit - Extra Small - 175mlPropGlide™ is a foul-release coating that when applied to your propeller(s) and running gear will increase fuel efficiency and the performance of any vessel. This super slick coating keeps your propellers clean from marine growth for extended periods of time. Gain the advantages by applying PropGlide™ to your vessel.PropGlide™ is available in four easy-to-use size kits. The Sailboat Kit makes it affordable for all boat sizes. Get over 25% more product with 30% savings over competitive brands.Increase in Prop Speed Means a Faster VesselPropGlide™ dramatically reduces drag on the propeller and running gear caused by even the smallest fouling. Since growth is unable to attach to PropGlide™ you will achieve higher RPM and vessel speed.Improved Fuel EfficiencyClean props and running gear provide more efficiencies to the engine and less fuel is burned and money saved!Biocide-Free and Environmentally FriendlyPropGlide™ is not a prop antifoulant, it is a foul release coating. It contains no harmful biocides, and performs because it is a super slick coating!Ease of ApplicationPropGlide™ is easy to apply for Do-It-Yourselfer's and not just for the professional applicator.Contains: 60ML Primer Base 15ML Primer Hardener 100ML Clear Topcoat This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Brochure (pdf)

Read more less