VE.Can RJ45 Terminator - Bag of 2This bag contains two VE.Can RJ45 terminators. The terminators are included with some other Victron products, for example, the CANUSB.Please contact your dealer for any returns, repairs or support issues related to this product. Specifications: Package Qty: Two Box Dimensions: 1"H x 1"W x 11"L WT: 0.1 lbs UPC: 8719076019923 Quick Guide (pdf)

Read more less

Marine Network Adapter Cable - Small Female (Right Angle) to Large FemaleAdapt the small network connector on your Garmin device to a large connector of Garmin Marine Network cables. Compatible with:GMR Fantom® 124, 126, 18x/24x Dome Radar, 254, 246, 54, 56 radarsTechnical Specifications:Length - 11.8" (30cm)*Sold as an Individual

Read more less

BlueNet™ Network Cable - 6'The Garmin BlueNet marine network cables offer additional cable lengths to help with installations. Additional sizes are sold separately.

Read more less

20' Marine Network Cable, RJ45WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Cable Length (Feet): 20' Box Dimensions: 3"H x 6"W x 9"L WT: 1 lbs UPC: 753759046132

Read more less

Marine Network Cable - 50'Garmin's marine network cables offer additional cable lengths to help with installation. Various sizes are sold separately.

Read more less

MPower 12 Channel DC Load Module NMEA 2K with 12" Pigtail Adapter Cable for J1 & J2 ConnectorsDesigned for vessels of all sizes with smaller loads, the MPower® CLMD12 is a compact 12-Channel DC Load Controller Module. Two of the 12 breakers handle a maximum of 12 amps, six handle a maximum of 10 amps, and four handle a maximum of 5 amps, with a total current capacity of 75 Amps. Additionally, circuits can be paralleled.If a smaller circuit needs to be protected, each of the 12 breakers can be set to trip at lower current levels using the new Maretron N2KAnalyzer® V3 software. In addition, the CLMD12 has inputs for up to 7 hard-wired switches that can be used to switch breaker states, or as inputs for other data, such as bilge alarms or hatch positions, etc.The CLMD12 handles many DC load types such as lights, pumps, motors, and electronics. An added benefit of the CLMD12 is that it reports the current through each of the 12 breakers. This allows you to determine if loads are drawing too much or too little electrical current. This information can be used to report overcurrent faults and undercurrent conditions, such as burnt-out bulbs.For manual control of the loads, an optional MPower 12-Channel Bypass Module (CBMD12) can be installed in conjunction with the CLMD12.Features: NMEA 2000® Interface IP67 Rated Ignition Protected Opto-isolated from NMEA 2000®, eliminating potential ground loops Twelve (12) dimmable Electronic Circuit Breakers (ECBs) for On/Off Control over NMEA 2000® network 2 breakers capable of carrying up to 12 Amps 6 breakers capable of carrying up to 10 Amps 4 breakers capable of carrying up to 5 Amps Individual breaker electrical current monitoring Breakers can have Power-Up states defined (ON, OFF, or PREVIOUS STATE) Breakers can be locked against inadvertent actuation. Seven (7) discrete inputs configurable as Active High or Active Low Automatic ECB overcurrent shutdown Automatic ECB thermal shutdown (Overtemperature Protection) Applications: Remote control of navigation lights Remote control of the boarding lights Burnt-out bulb alerts Control of area lights with dimming This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: AC/DC: DC Touchscreen: No Box Dimensions: 4"H x 7"W x 10"L WT: 2.3 lbs UPC: 873804004181 Quick Guide (pdf)

Read more less

CLMD16-J2 Output Mating Connector with 1M LeadsOutput (J2) Mating Connector with 1m Flying Leads.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Cable Length (Feet): 3 Box Dimensions: 1"H x 6"W x 7"L WT: 0.8 lbs UPC: 873804004303

Read more less

RJ45 to HUB102 Cable 0.5M Waterproof RJ45 (M) to RJ45 AdapterFuruno's waterproof RJ45 (M) to RJ45 Adapter Cable.Specifications: Length: 0.5M Waterproof This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

CLMD16-J1 Output Mating Connector 1M LeadsOutput (J1) Mating Connector with 1m Flying Leads.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Cable Length (Feet): 3 Box Dimensions: 1"H x 6"W x 6"L WT: 0.4 lbs UPC: 873804004310

Read more less

BlueNet™ Network Cable - 500'The Garmin BlueNet™ network cables offer various lengths to help with installations. Various sizes are sold separately. Consider purchasing the Field installable Adapter Kit for the Garmin BlueNet™ network if purchasing this 500-foot-long cable.

Read more less

J1 Output Mating Connector with 3M Leads-CLMD12Output (J1) Mating Connector with 12" flying leads.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Cable Length (Feet): 9 Box Dimensions: 1"H x 7"W x 7"L WT: 0.8 lbs UPC: 873804004167

Read more less

12 Circuit Bypass Module NMEA 2K without Fuse Pack & Jumper WireFor manual control of the loads, an optional MPower® 12-Channel Bypass Module (CBMD12) can be installed in conjunction with the 12-Channel DC Load Controller Module (CLMD12). The maximum current capacity for the CBMD12 is 75 amps in 12V DC and 24V DC power systems.The Bypass Module provides a manual method (ON/OFF switch) to control loads by providing power to each load in case of a CLMD12 malfunction or a NMEA 2000® network failure. The CBMD12 utilizes standard fuses for overcurrent protection and 12 Carling Curvette® Rocker Switches for manual control of each load. With the use of the Curvette rocker switches, there is no arcing that occurs while manually overriding a load. Furthermore, unlike other digital switching products, MPower does not require moving a fuse, which can cause electrical connections to degrade or the possibility of ignition.It’s important to ensure that the current rating of the fuse for each load is appropriate to protect the load and the wiring for that load. Please note that the bypass module does not support paralleled outputs, since each circuit is controlled by a separate switch. Additionally, the bypass module does not support dimming of circuits.Features: 75 Amps maximum current capacity Outputs 12A Max (two outputs) 10A Max (six outputs) 5A Max (four outputs) 12V and 24V DC power systems Carling Technologies Curvette® Rocker Switches Overcurrent protection via ATC standard fuses This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Quick Guide (pdf)

Read more less

J2 Output Mating Connector with 3M Leads-CLMD12Input (J2) Mating Connector with 12" flying leads.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Cable Length (Feet): 9 Box Dimensions: 1"H x 4"W x 5"L WT: 0.1 lbs UPC: 873804004174

Read more less

CLMD16-J3 I/O Mating Connector KitJ3 (I/O Gen Purpose) Harness Kit with 1m Flying Leads.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

MPower® 16-Channel DC Load Controller Module with NMEA 2K without ConnectorsFor larger breakers and more circuits, the MPower® CLMD16 is a 16-Channel DC Load Controller Module. Four of the 16 breakers handle a maximum of 25 amps, and twelve breakers handle a maximum of 12 amps, with a total current capacity of 125 Amps. Additionally, circuits can be paralleled.The CLMD16 also supports two H-Bridge reversing polarity circuits that can be used for loads such as engine hatches, passerelles, trim tabs, etc. The CLMD16 has 8 inputs for hard-wired switches that can be used to switch breaker states, or as inputs for other data, such as bilge alarms or hatch positions, etc. There are 3 inputs capable of monitoring tank levels.The CLMD16 handles many DC load types such as lights, pumps, motors, and electronics. An added benefit of the CLMD16 is that it reports the current through each of the 16 breakers. This allows you to determine if loads are drawing too much or too little electrical current. This information can be used to report overcurrent faults and undercurrent conditions, such as burnt-out bulbs.Features: NMEA 2000® Interface IP67 Rated Ignition Protected Opto-isolated from NMEA 2000®, eliminating potential ground loops Sixteen (16) dimmable Electronic Circuit Breakers (ECBs) for On/Off Control over NMEA 2000® network 4 breakers capable of carrying up to 25 Amps 12 breakers capable of carrying up to 12 Amps Individual breaker electrical current monitoring Breakers can have Power-Up states defined (ON, OFF, or previous states) Breakers can be locked against inadvertent actuation. Capacitive touch switches for local control of all loads All inputs and outputs are protected against short to Power and short to Ground Automatic ECB overcurrent shutdown Automatic ECB thermal shutdown (Overtemperature Protection) Eight (8) discrete digital input channels capable of sensing +ve or ground signals Two (2) resistive analog input channels One (1) 4-20mA current loop input channel Applications: Remote control of navigation lights Remote control of boarding lights Burnt-out bulb alerts Control of area lights with dimming This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Quick Guide (pdf)Owner's Manual (pdf)

Read more less

NavNet TZtouch2 Black Box Chartplotter/FishfinderTotal Control, Simply RefinedWith the ability to drive multiple monitors with full HD HDMI video output in any combination of monitor aspect ratios (4:3 and 4:3, 16:9 and 4:3, or 16:9 and 16:9), a refined graphical user interface, and a built-in RezBoost Fish Finder, Furuno's NavNet TZtouch2 Black Box is a beauty to behold and use. Whether you are searching for hot fishing grounds, plotting your next route, or using your Radar to navigate through fog, NavNet TZtouch2 delivers smooth operation with familiar touch gestures.Simply Refined, Simply BeautifulFollowing in the footsteps of the original NavNet TZtouch, TZtouch2 features a refined user interface that is all about usability. Elegantly designed, NavNet TZtouch2 allows you to build a navigation suite that is not only functional, but offers a luxurious look and feel. Taps, swipes, pinches, and custom multi touch gestures are instantly transformed into action, giving you full control of every component connected to your network.Incredibly easy-to-use controller and graphical user interfaceThe optional MCU005 NavNet TZtouch2 Black Box controller enhances the built-in Multi Touch graphical user interface, and sets a new benchmark for "easy to use" in the marine electronics industry. This interface is not only intuitive, but is as easy to use as the phone in your pocket. The combination of an ergonomically designed, logical controller, along with a touch-screen Graphical User Interface, make operation simple. With taps, slides and swipes, you will be up and using your TZtouch2 in no time at all. Menus and other features slide out from each of the sides of the screen, ensuring that the most important tasks are literally right at your fingertips.The available MCU004 Remote Control option features a large rotary knob which can be utilized for zooming in/out, while the joy stick allows you to pan around the chart and move the cursor on the screen. The MCU004 remote has 8 dedicated buttons that operate different functions, such as Edge Swiping, Home, Stand By/Auto for Autopilot control, MOB, and Center on vessel.Powerful Fish Finder with built-in Furuno featuresThe built-in Fish Finder is a dual-frequency (50/200kHz), 600W/1kW power output sounder. It includes Furuno’s unique Bottom Discrimination and AccuFish modes, and also incorporates another new Furuno proprietary Fish Finder technology, called RezBoost. RezBoost is a revolutionary new feature that utilizes Furuno’s exclusive digital signal processing protocol to produce fantastic target resolution and separation, without the need to change out your transducer, or purchase expensive broadband transducers. With RezBoost, you can now achieve target separation and resolution that was previously limited to Furuno commercial-grade Fish Finders.Freedom to build the helm of your dreamsNavNet TZtouch2 is a component-based system that utilizes Furuno’s award winning network products. You can add a variety of UHD Radars, from a 4kW NXT Dome up to a 25kW X-Class Open Array. As with NavNet TZtouch, you can integrate, display, and control the NavPilot Autopilot, and Furuno’s FI70 Instrument. Both of these products have displays that match TZtouch2, giving your helm a beautiful all-glass finish. Additional sensors that can be added to the network include AIS, Weather Fax, Sirius/XM Satellite Weather, Fusion Marine Stereo, and IP Cameras, as well as NMEA2000 and Furuno CAN bus devices. It even includes one NMEA0183 output port to send data to legacy systems.Remotely view and control your bridge with apps for your smartphone and tablet Engineered to utilize the latest technology, NavNet TZtouch opens the door to cutting edge WiFi features, such as tablet and smartphone apps, points of interest (POI), real time weather data, software updates and more. Take full control of your NavNet in a whole new way. The TZtouch Remote app allows you to operate your system remotely with your smartphone or tablet over WiFi, when connected to the network.MapMedia Raster and Vector Chart LibraryFreely choose the charts that fit your individual needs and preference. MapMedia's NOAA Raster and Vector charts for the U.S. Coasts, Gulf of Mexico, Alaska and Hawaii come pre-loaded. In addition, MapMedia brings you free satellite photos and detailed fishing bathymetric charts that can be download for the U.S. Outside of the U.S., "C-MAP" and "Datacore by Navionics" vector cartography can be purchased and downloaded to your NavNet with ease. MapMedia cartography integrates cutting edge algorithms with high resolution image processing techniques to deliver a fusion of digital navigation charts and satellite photography. Satellite PhotoFusion™ offers a birds-eye view without obstruction of critical dataYou can load any two ultra-wide high-resolution satellite photo areas at your convenience. Land areas (zero depth) are completely opaque, so these areas are displayed as high-resolution satellite photos on the chart. As the depth increases, the satellite photography becomes more transparent. This allows you to see where the shallows end and the deeper water begins, while still allowing the raster or vector chart to be visible.Free & easy-to-use marine weather forecastsThe weather tool is completely free and easy to use, giving you unlimited access to weather forecasts worldwide 24 hours a day provided by NavCenter. Select geographic coverage, data type, period of time, and then choose how to receive the file. NavNet TZtouch2 provides up to 16 days of weather forecasting.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

AS EC 30E Ethernet Cable - 30'The Ethernet Cable is a 30' cable that allows the connection of two Ethernet capable units to be connected. WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Cable Length (Feet): 30' Box Dimensions: 4"H x 8"W x 9"L WT: 1.35 lbs UPC: 082324509186 Owner's Manual (pdf)

Read more less

High-Temperature Smoke/Heat Detector KitMaretron's High-Temperature Smoke/Heat Detector Kit is an intelligent NMEA 2000® networked solution, designed to alert you of unusually fast rises in temperature or smoke.This kit contains a smoke/heat detector, auxiliary relay, and sounder that are designed to work in high-temperature marine environments, such as engine rooms. The components in this kit are rated from -25°C (-13°F) to +70°C (158°F). This system is designed to work with a 24 VDC power supply.Features: Kit contains a smoke/heat detector, auxiliary relay, and sounder Designed to work in high-temperature marine environments, such as engine rooms Connects to an NMEA 2000® network via a Maretron SIM100 Switch Indicator Module (sold separately) Rated from -25°C (-13°F) to +70°C (158°F) For use with a 24 Volt DC power supply

Read more less

Use cable coupler to join 2 marine network cables end to endWARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Marine Network Cable - 500'Our marine network cable offers an additional 500'(152.4M) of cable length.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Cable Length (Feet): 500' Box Dimensions: 4"H x 11"W x 11"L WT: 12.8 lbs UPC: 753759049966

Read more less

2M LAN Waterproof Cable for TZtouchXL Furuno's TZtouchXL LAN Cable ASSYSpecifications: Length: 2M Waterproof This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

0.5M Jumper Cable for HUB102Furuno's HUB102 0.5M Jumper CableSpecifications: Length: 0.5M Jumper Cable This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

MPower 12 Channel DC Load Controller Module with NMEA 2K - No ConnectorsDesigned for vessels of all sizes with smaller loads, the MPower® CLMD12 is a compact 12-Channel DC Load Controller Module. Two of the 12 breakers handle a maximum of 12 amps, six handle a maximum of 10 amps, and four handle a maximum of 5 amps, with a total current capacity of 75 Amps. Additionally, circuits can be paralleled.If a smaller circuit needs to be protected, each of the 12 breakers can be set to trip at lower current levels using the new Maretron N2KAnalyzer® V3 software. In addition, the CLMD12 has inputs for up to 7 hard-wired switches that can be used to switch breaker states, or as inputs for other data, such as bilge alarms or hatch positions, etc.The CLMD12 handles many DC load types such as lights, pumps, motors, and electronics. An added benefit of the CLMD12 is that it reports the current through each of the 12 breakers. This allows you to determine if loads are drawing too much or too little electrical current. This information can be used to report overcurrent faults and undercurrent conditions, such as burnt-out bulbs.For manual control of the loads, an optional MPower 12-Channel Bypass Module (CBMD12) can be installed in conjunction with the CLMD12.Features: NMEA 2000® Interface IP67 Rated Ignition Protected Opto-isolated from NMEA 2000®, eliminating potential ground loops Twelve (12) dimmable Electronic Circuit Breakers (ECBs) for On/Off Control over NMEA 2000® network 2 breakers capable of carrying up to 12 Amps 6 breakers capable of carrying up to 10 Amps 4 breakers capable of carrying up to 5 Amps Individual breaker electrical current monitoring Breakers can have Power-Up states defined (ON, OFF, or PREVIOUS STATE) Breakers can be locked against inadvertent actuation. Seven (7) discrete inputs configurable as Active High or Active Low Automatic ECB overcurrent shutdown Automatic ECB thermal shutdown (Overtemperature Protection) Applications: Remote control of navigation lights Remote control of boarding lights Burnt-out bulb alerts Control of area lights with dimming This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: AC/DC: DC Touchscreen: No Box Dimensions: 4"H x 7"W x 10"L WT: 1.8 lbs UPC: 873804004105 Quick Guide (pdf)

Read more less

M300 RayNet Right Angle to Straight Cable - 3MRayNet is a waterproof Ethernet cabling system developed by Raymarine, ideal for marine environments. All current-generation FLIR M-Series digital cameras feature a male RayNet connector.Cables offer waterproof construction, a positive lock/unlock collar, gigabit-speed data transfer, as well as straight-through and 90° connector options. Specifications: Cable Length (Feet): 9.8 Box Dimensions: 1"H x 10"W x 11"L WT: 0.5 lbs UPC: 723193841150

Read more less

ETHEXT-25YL25 ft. Ethernet CableWorks with: Broadband Sounder-1, GlobalMap 5200C, GlobalMap 5300C iGPS, GlobalMap 7200C, GlobalMap 7300C HD, GlobalMap 8200C, GlobalMap 8300C HD, GlobalMap 9200C, GlobalMap 9300C HD, GlobalMap Baja 540C, GlobalMap Baja 840C, LCX-112C, LCX-113C HD, LCX-27C, LCX-28C HD, LCX-37C, LCX-38C HD, LMS-520C, LMS-522C iGPS, LMS-525C DF, LMS-527C DF iGPS, Navico Expansion Port-1 Specifications: Cable Length (Feet): 25' Box Dimensions: 3"H x 4"W x 10"L WT: 0.7 lbs UPC: 042194532059

Read more less

TZtouchXL Multi CableSpecifications: Multi Cable Specifically for TZtouchXL

Read more less

RNS-5 5 Port RayNet Gigabit SwitchThe RNS-5 network Gigabit switch is designed for expanding Raymarine integrated chartplotter systems using RayNet high-speed Ethernet cabling. Use the RNS-5 to integrate Axiom displays with radars, sonar modules, IP cameras, and Teledyne FLIR thermal cameras. The RNS-5 also supports networking with Raymarine YachtSense digital control systems and the YachtSense Link marine mobile router. Two RNS-5 switches can be daisy-chained together for larger systems. The RNS-5 is simple to install and requires no complicated setup.Features: 5 RayNet Ethernet gigabit ports for fast and reliable connectivity Rugged IPX6 and IPX7 construction Reliable, waterproof RayNet connector Ethernet cable ports Designed for simple bulkhead mounting LED power and network port status indicators Unmanaged- simply plug and play with Raymarine devices No complicated setup or configuration Quick Guide (pdf)

Read more less

BlueNet™ 20 SwitchIncrease the number of available network ports in a Garmin BlueNet™ network. Once you’ve used all the ports on your compatible chartplotter just add a Garmin BlueNet 20 switch to the setup and keep constructing your expansive high-speed network.In the Box:  Garmin BlueNet 20 Switch Power cable Mounting hardware Garmin BlueNet™ network cable (2 meters) Documentation

Read more less

Ethernet cable - 20 feetQuickly setup an ethernet connection between two Humminbird ethernet capable units.Available in four lengths.WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Cable Length (Feet): 20' Box Dimensions: 2"H x 8"W x 9"L WT: 1 lbs UPC: 082324509179 Owner's Manual (pdf)

Read more less

5M LAN Waterproof Cable RJ45 x RJ45 for TZtouchXL Furuno's TZtouchXL LAN Cable ASSYSpecifications: Length: 5M Waterproof RJ45 x RJ45 This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

NEP-2 Network Expansion PortLowrance NEP-2 Network Expansion Port-2 plug-and-play hub for high-speed data-sharing of multiple HDS, LCX,and LMS products with ethernet modules, like the LWX-1 SIRIUS Satellite Radar and Radio module and the Broadband Sounder module across the onboard network. Lowrance NEP-2 Waterproof expansion ports resist corrosive marine environments. Unused expansion ports capped for future expansion.

Read more less

HUB102 5-Port Marinized Ethernet HubHUB102 Marinized Ethernet Hub, designed to simplify marine connectivity with up to gigabit speed performance. Supporting multiple sensors and Furuno Multi-Function Displays (MFDs), the HUB102 features water-resistant connections and sealed covers to protect unused data ports. With LED indicators for power and port status, setup is a breeze—plug in peripherals, and they’re instantly detected. Expand any NavNet TZtouch system effortlessly by adding up to six HUB102s to the network.Features: Five Ethernet ports with twist-lock waterproof connectors Transfer speed: Gigabit full duplex, 10Mbps/100Mbps half/full duplex Connect up to (6) HUB102 for expanded network capabilities Compatible with virtually all Ethernet devices LED status indicators for power and network ports Simple bulkhead or deck mounting with no setup required This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

GXM™ 54 Satellite Weather/Radio Antenna - BlackThe GXM 54 satellite weather/radio antenna with SiriusXM coverage lets users head out with detailed weather information¹ that’s delivered straight to a Garmin chartplotter. Users gain added awareness and confidence on the water with the most current weather conditions and forecasts, including NEXRAD, lightning, wind, and wave information. And users enjoy high-quality entertainment with more than 150 channels of SiriusXM satellite radio.Plus, add Fish Mapping™ to find suggested potential hot spots for popular species — including mahi, marlin, swordfish, wahoo, and yellowfin — based on sea conditions. Display sea surface temperature contours, surface temperature front strength, and 30-meter subsurface temperature contours, and monitor plankton data such as concentration contours and plankton front strength.GXM 54 is easy to install and use, and its reliable antenna provides the best possible reception — even on the fringes of SiriusXM coverage. It’s fully compatible with select Garmin chartplotters and chartplotter/sonar combos.Features: See detailed weather information¹ directly on a compatible Garmin chartplotter for increased situational awareness Use the fish mapping feature¹ to find suggested potential hot spots for popular species and to view sea surface temperatures, plankton concentrations, floating algae, and more Refine the fish species that appear on the chartplotter map Experience high-quality entertainment with access to more than 150 channels of SiriusXM satellite radio¹ Gain access to the most current weather conditions and forecasts, including NEXRAD, lightning, wind, and waves¹ A reliable antenna provides the best possible reception — even on the fringes of SiriusXM coverage Physical: Dimensions (D x H): 3.61” x 1.95” (91.6 x 49.5 mm) Weight: 7.9 oz (224 g) Operating temperature range: From -22 to 158 degrees F (from -30 to 70 degrees C) Storage temperature range: From -31 to 185 degrees F (from -35 to 85 degrees C) Case material: Fully gasketed, plastic and die-cast aluminum Water rating: IPX7 Electrical: Power input source: From 9 to 32 Vdc Input current: 500 mA max. at 12 Vdc Max power usage: 6 W Fuse: 32 V, 2 A, mini-blade type, fast-acting In the Box:GXM 54 Pole mount Surface mount Mounting hardware Cable (6 meters) Power and audio module Documentation ¹Weather, audio, and fish mapping features each require a paid subscription with SiriusXM Specifications: Cable Length (Feet): 6m Box Dimensions: 6"H x 9"W x 11"L WT: 2.85 lbs UPC: 753759331238

Read more less

Ethernet Cable - 10 FeetQuickly setup an ethernet connection between two Humminbird ethernet capable units.Available in four lengths.WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Cable Length (Feet): 10' Box Dimensions: 2"H x 8"W x 9"L WT: 0.3 lbs UPC: 082324509162 Owner's Manual (pdf)

Read more less

Rugged, high-speed, moisture - and solvent-resistant data cables withstand the toughest onboard marine environments. For Lowrance models with 5-pin yellow ethernet connector. Specifications: Cable Length (Feet): 15' Box Dimensions: 4"H x 4"W x 9"L WT: 0.25 lbs UPC: 042194532042

Read more less

GXM™ 54 Satellite Weather/Radio Antenna - WhiteAdd SiriusXM® Weather and Radio Plus Fish Mapping Directly on Your ChartplotterThe GXM 54 satellite weather/radio antenna with SiriusXM coverage lets you head out with detailed weather information¹ that’s delivered straight to your Garmin chartplotter.  With the most current weather conditions and forecasts, you’ll gain added awareness and confidence on the water, including NEXRAD, lightning, wind, and wave information.  And you’ll enjoy high-quality entertainment with more than 150 SiriusXM satellite radio channels.Plus, you can add Fish Mapping™ to find suggested potential hot spots for popular species — including mahi, marlin, swordfish, wahoo, and yellowfin — based on sea conditions.  Display sea surface temperature contours, surface temperature front strength, and 30-meter subsurface temperature contours, and monitor plankton data such as concentration contours and plankton front strength.GXM 54 is easy to install and use, and its reliable antenna provides the best possible reception — even on the fringes of SiriusXM coverage.  Compatible With: Garmin GPSMAP® 8400/8600  Garmin GPSMAP 7400/7600  Garmin GPSMAP 7x2/9x2/12x2 Touch  GPSMAP 10x2/12x2 chartplotters and chartplotter/sonar combos. Features: See detailed weather information¹ directly on your compatible Garmin chartplotter for increased situational awareness Experience high-quality entertainment with access to more than 150 channels of SiriusXM satellite radio¹ Gain access to the most current weather conditions and forecasts, including NEXRAD, lightning, wind, and waves¹ The reliable antenna provides the best possible reception — even on the fringes of SiriusXM coverage In the Box: GXM 54 Pole mount Surface mount Mounting hardware Cable (6 meters) Power and audio module Documentation ¹Weather and audio features each require a paid subscription with SiriusXMSiriusXM and all related marks and logos are trademarks of SiriusXM Radio Inc.*Sold as an IndividualWARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Cable Length (Feet): 19.69 Box Dimensions: 5"H x 8"W x 10"L WT: 3 lbs UPC: 753759232474 Brochure (pdf)

Read more less

VHF Antenna SplitterA splitter allows a signal to be shared across multiple devices. The VHF Antenna Splitter allows you to use the same antenna for an AIS receiver and a VHF radio.Features: Small robust VHF antenna splitter IPx6 and IPx7 Multiplexes multiple devices to a single antenna Zero performance loss This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

RNS-8 Network Switch - 8 Port Raynet Network SwitchThe RNS-8 network switch is a premium network switch for integrated Raymarine chartplotter systems. Use the RNS-8 to integrate Axiom displays with radars, sonar modules, and FLIR thermal cameras. The RNS-8 features 4 dedicated Power-Over-Ethernet (POE) ports for integrating and powering POE-compatible devices like CAM300 marine IP cameras and RMK-10 remote keypads. The RNS-8 also supports networking with Raymarine YachtSense digital control systems and the YachtSense Link marine mobile router. Multiple RNS-8 switches can be daisy-chained together for larger systems. The RNS-8 is simple to install and requires no complicated setup.Features: 8 RayNet Ethernet gigabit ports for fast and reliable connectivity 4 dedicated Power-Over-Ethernet (POE) ports for powering cameras and remotes Rugged IPX6/IPX7 construction Reliable, waterproof RayNet connector Ethernet cable ports Designed for simple bulkhead mounting LED power and network port status indicators Unmanaged- simply plug and play with Raymarine devices. Remote diagnostics and performance monitoring via web browser For extended networks, up to 8 RNS-8 switches can be daisy-chained together

Read more less

Rugged, high-speed, moisture and solvent-resistant data cable withstand the toughest onboard marine environments. For Lowrance models with 5-pin yellow ethernet connector. Specifications: Cable Length (Feet): 50' Box Dimensions: 3"H x 6"W x 7"L WT: 1.1 lbs UPC: 042194532349

Read more less

6' Extension cable fits all 2007 and newer Ethernet-enabled Lowrance units with 5-pin yellow connector Specifications: Cable Length (Feet): 6' Box Dimensions: 4"H x 4"W x 9"L WT: 0.3 lbs UPC: 042194533568

Read more less

RJ45 Waterproof ConnectorFLIR's RJ45 waterproof connector is a key component for installing and operating your maritime thermal camera from FLIR. The RJ45 waterproof connector connects the thermal camera itself to the Joystick Control Unit (JCU) using an Ethernet cord, transmitting both data and electricity along a single cord. FLIR has designed the RJ45 waterproof connector with a standard RJ45 port, and it is PoE enabled so you can connect it directly to your JCU without having to use a PoE Injector. It is designed with a sturdy waterproof enclosure to protect against the elements, meaning the connector won't be the weakest link in your thermal imaging chain. You can't control your thermal camera without FLIR's RJ45 waterproof connector.

Read more less

NMEA 2000 T-Connector - 6 PortsAs the NMEA 2000 network expands beyond the 3-device limit of Digital Yacht’s NMEA 2000 Starter Kit, users can use this 4-way T-piece to add another four additional devices. With male > female > female connectors, multiple T-pieces can be plugged together or added to the 4-way T-piece included in the starter kit. Also, The 4x lower “drop cable” connector is female so that there are no exposed pins when the drop cable is removed.*Digital Yacht can supply NMEA 2000 cables and connectors to expand the NMEA 2000 to whatever size is needed (up to the maximum 50 NMEA 2000 device limit).Features: NMEA 2000 4 x T-pieces Standard “Micro C” connectors make it very easy for future network expansion Metal connectors improve reliability Waterproof rating of IP68 Quick Guide (pdf)

Read more less

BlueNet™ 30 Gateway The Garmin BlueNet 30 gateway is required for Garmin BlueNet™ network compatible devices to network with legacy Garmin marine devices. Through this gateway, you can connect a Garmin BlueNet network to a legacy Garmin Marine Network for a premium control experience.In the Box: Garmin BlueNet 30 Gateway Power cable Mounting hardware Garmin BlueNet™ network cable (2 meters) Documentation

Read more less

Ethernet Cable for M-Series - 25'FLIR's 25' Ethernet Cable is for connecting the FLIR M-Series Cameras tothe Joystick Control Unit.Features: Double Shielded RJ-45 LSZH 25' long Specifications: Cable Length (Feet): 25' Box Dimensions: 2"H x 7"W x 8"L WT: 0.6 lbs UPC: 815121010773

Read more less

Fusion to Garmin Marine Network Cable - Male to RJ45 - 6' (1.8M)Use these adapter cables to link your GPSMAP® Series chartplotter to a compatible Fusion® stereo.  These cables will connect a Garmin Marine Network port to an RJ45 port and are offered in male and female connector varieties to fit your specific system.Features: Length - 6' (0.15 M) Connections - RJ45 Compatible Products: Fusion Apollo RA770 Fusion Apollo SRX400 Fusion Apollo WB670 Fusion Apollo RA670 *Sold as an IndividualWARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Cable Length (Feet): 6 Box Dimensions: 1"H x 5"W x 6"L WT: 0.25 lbs UPC: 753759288471 Brochure (pdf)

Read more less

MDA-3 Metadata AIS Zero Loss Antenna SplitterUtilizes a compact (5.5"X3.9"X1.9") module that is IPx7 Waterproof rated, for flexible location and rugged performance in any marine environment.The Metadata AIS Zero Loss Antenna Splitter allows for the full use of VHF communications and AIS send/receive with a single antenna. This sophisticated antenna splitter was developed specifically for use with Class B AIS transceivers, providing optimum AIS and VHF radio performance in all situations. Sophisticated electronics packed into this rugged, waterproof splitter ensure no loss to the received signal, maintaining existing VHF reception range and performance. Built-in safety features such as Clear Call Routing (CCR) ensure VHF radio emergency call priority - and continued full-performance operation, even if the power input should fail. The Metadata AIS Zero Loss Antenna Splitter is designed for easy integration with marine electronics, and can also be utilized for clear FM broadcast reception.Specifications:Power 12 to 24V DC Power consumption: 150mA @12VDC, <2W average Silent mode switch input Supplied with 2m power and FM cable 1m Accessory Cable User manual and quick start guide Product CD Fixing screws Brochure (pdf)

Read more less

Marine Network Adapter Cable (Small to Large)Convert your compatible device’s network connector from small to large so it can connect to a compatible Garmin chartplotter. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Termination Resistors are required on a NMEA 2000 network and are placed at each end of a network trunk cable. Like the double-ended cordsets, the termination resistors are waterproof and continue to function even while submerged in the bilge. Diagnostic versions indicate correct polarity at a glance to ensure power connections have been made properly Screw connector for positive connnection Termination resistors are used to terminate both ends of the trunk line

Read more less