![Airmar 599 Low/High Frequency - In-Hull Chirp Transducer w/o Connector [R599C-LH]](http://rebellionmarine.com/cdn/shop/files/64842XL.jpg?crop=center&height=645&v=1734479859&width=645)
![Airmar CM599LH 1-3kW Pocket Mounted Transducer - No Connector [CM599C-LH]](http://rebellionmarine.com/cdn/shop/files/101917XL.jpg?crop=center&height=645&v=1735230035&width=645)
![Airmar B275C-LHW Bronze Thru-Hull - Low High Wide Frequency - Requires Mix Match Cable [B275C-LHW-MM]](http://rebellionmarine.com/cdn/shop/products/66384XL.jpg?crop=center&height=645&v=1656108366&width=645)
-
Airmar Airmar R599C-LM In Hull 3kW Low/Medium CHIRP No Connector
Airmar R599 Low-Medium Chirp, 3kW, No Connector, DepthModel: R599C-LM Depth only 2 to 3 kW for superior deep-water performance Low frequency: 28 to 60 kHz 23° to 9° port-starboard beamwidth 11° to 5° fore-aft beamwidth Depth performance to 3,048 m (10,000') Medium frequency: 80 to 130 kHz 13° to 8° beamwidth Depth performance to 914 m (3,000') 82 kHz of total bandwidth from one transducer Covers popular fishing frequencies of 38, 50, 88, and 107 kHz plus everything else in the bandwidth Urethane transducer housing with plastic mounting tank Exclusive Xducer ID® technology Having the right tool for the job makes the job easier and provides better results. The right tool for covering deep-water haunts of swordfish, tuna, and other species is a 2 to 3 kW, low to medium-frequency transducer. The Chirp-ready R599LM delivers the deep-water performance of the low frequency down to 3048 m (10000') plus the detailed returns produced by the narrower beams of the medium band.Chirp technology shows 5 to 10 times-greater detail and resolution than conventional frequencies. The R599LM transmits across the low frequency bandwidth of 28 to 60 kHz and the medium frequency from 80 to 130 kHz. This transducer delivers up to 82 kHz of total bandwidth in a single installation.The transducer is installed in the included tank which is cut to the boat’s deadrise angle and affixed inside the hull. When the transducer is placed inside the tank, it is properly oriented for optimal performance. The R599LM is a popular choice for customers not wanting to drill a hole in their hull and for trailered or multi-hull boats.Specifications Cable-Length 15 m (49') Connector Bare Wire Cross Reference A80213 Deadrise Range 0° to 22° Display Connector 0 Frequency Band Low-Medium Housing Material Urethane Hull Material Solid fiberglass only Low Frequency 28-60 kHz Low Frequency Beamwidth 23°-9° Max Deadrise Up to 22° (short side), up to 12° (long side) Max Deadrise Angle 22° Max Depth Low frequency- 3048 m (10000'), Medium frequency- 914 m (3000') Max Vessel LOA 12 m (40') and above Medium Frequency 80-130 kHz Medium Frequency Beamwidth 13°-8° Mounting Style In-Hull Power Rating 2-3 kW Single or Dual Frequency CHIRP-Ready Dual-Band Tilted Element No What's in the Box: R599 Transducer with 15m cable Tank Gasket Plate Hardware
$6,399.00
-
Airmar Airmar R599C-LH In Hull 3kW Low/High CHIRP No Connector
Airmar R599 Low-High Chirp, 3kW, No Connector, DepthModel: R599C-LH Depth only 2 to 3 kW for superior deep-water performance Low frequency: 28 to 60 kHz 23° to 9° port-starboard beamwidth 11° to 5° fore-aft beamwidth Maximum depth of 3,048 m (10,000') High frequency: 130 to 210 kHz 8° to 4° beamwidth Maximum depth of 457 m (1,500') 112 kHz of total bandwidth from one transducer Covers popular fishing frequencies of 50 and 200 kHz plus everything else in the bandwidth Urethane transducer housing with plastic mounting tank Exclusive Xducer ID® technology The R599LH is the go-to transducer for today’s top captains who want the maximum depth capability combined with the excellent target resolution of the high-frequency band. This powerhouse shows extreme target detail, bottom discrimination, and bait and game-fish separation at all depths. The R599LH is packed with a twenty-four element, low-frequency array that operates at anywhere between 28 and 60 kHz. The single, high-frequency ceramic operates at any frequency between 130 and 210 kHz and has a narrow, 8° to 4°, beam, delivering amazing target resolution and bottom detail.The transducer is installed in the included tank which is cut to the boat’s deadrise angle and affixed inside the hull. When the transducer is placed inside the tank, it is properly oriented for optimal performance. The R599LH is a popular choice for customers not wanting to drill a hole in their hull and for trailered or multi-hull boats.Specifications Cable-Length 15 m (49') Connector Bare Wire Cross Reference A80212 Deadrise Range 0° to 22° Display Connector 0 Frequency Band Low-High Housing Material Urethane Hull Material Solid fiberglass only Low Frequency 28-60 kHz Low Frequency Beamwidth 23°-9° Max Deadrise Up to 22° (short side), up to 12° (long side) Max Deadrise Angle 22° Max Depth Low frequency- 3048 m (10000'), High frequency- 457 m (1500') Max Vessel LOA 12 m (40') and above High Frequency 130-210 kHz High Frequency Beamwidth 8°-4° Mounting Style In-Hull Power Rating 2-3 kW Single or Dual Frequency CHIRP-Ready Dual-Band Tilted Element No What's in the Box: R599 Transducer with 15m cable Tank Gasket Plate Hardware
$6,199.00
-
Airmar Airmar R509C-LHW Low/High-Wide Chirp 3KW Thru-Hull Mount Depth/Temp No Connector
Airmar R509 Low-High Wide Chirp, 3kW, w/FB, No Connector, DTModel: R509C-LHW Depth and fast-response water-temperature sensing 2 to 3 kW of power for exceptional deep-water performance Low frequency: 28 to 60 kHz, 23° to 9° port-starboard beamwidth, 11° to 5° fore-aft beamwidth, Maximum depth of 3048 m (10000') High frequency: 150 to 250 kHz, 25° constant beamwidth, Maximum depth of 152 m (500') 132 kHz of total bandwidth from one transducer Covers popular fishing frequencies of 38, 50, and 200 kHz plus everything else in the bandwidths High frequency provides superior shallow-water performance, bottom detail, and fish-target separation High wide beamwidth yields more coverage for detecting fish in the upper-water column Urethane housing with fairing for optimal performance Get more coverage under your boat with Airmar’s unique wide-beam, low and high-frequency, Chirp-ready R509LHW. The high band operates across a frequency range of 150 to 250 kHz and has a fixed 25° beam for all frequencies which results in superior resolution. The constantly wide beam provides twice the coverage and clear fish arches on the display compared to most high-frequency, narrow-beam transducers.The high wide is the ideal choice for both inshore and pelagic fishing, where resolution and maximum coverage are essential down to 152 m (500'). The low-frequency band is rated to 3 kW and delivers amazing deep-water performance to 3048 m (10000'). Get the best of both worlds with Airmar’s Chirp-ready transducer with wide-beam coverage.Specifications Acoustic Window Epoxy/urethane Cable-Length 15 m (49') Connector Bare Wire Deadrise Range Up to 25° with fairing Frequency Low-High Wide Low Frequency 28-60 kHz Low Frequency Beamwidth 25°-16° High Frequency 150-250 kHz High Frequency Beamwidth 25° Housing Material Urethane Max Deadrise Up to 22°
$5,899.00
-
Airmar Airmar R509C-LM Low/Med Chirp 3KW Thru-Hull Mount Depth/Temp No Connector
Airmar R509 Low-Medium Chirp, 3kW, w/FB, No Connector, DTModel: R509C-LM Depth and fast-response water-temperature sensing 2 to 3 kW of power for exceptional deep-water performance Low frequency: 28 to 60 kHz, 23° to 9° port-starboard beamwidth, 11° to 5° fore-aft beamwidth, Maximum depth of 3048 m (10000') Medium frequency: 80 to 130 kHz, 13° to 8° beamwidth, Maximum depth of 914 m (3000') 82 kHz of total bandwidth from one transducer Covers popular fishing frequencies of 38, 50, 88, and 107 kHz plus everything else in the bandwidth Urethane housing with fairing for optimal performance Patented Xducer ID® technology Having the right tool for the job makes the job easier and gives better results. The right tool for covering deep-water haunts of swordfish, tuna, and other species is a 2-3 kW, low and medium-frequency transducer. The Chirp-ready R509LM delivers the deep-water performance of the low frequency down to 3048 m (10000') plus the detailed returns produced by the narrower beams of the medium band.Chirp technology shows 5 to 10 times-greater detail and resolution than conventional frequencies. The R509LM transmits across the low-frequency bandwidth of 28 to 60 kHz and operates in the medium-frequency range of 80 to 130 kHz. This transducer delivers up to 82 kHz of total bandwidth in a single installation.Specifications Acoustic Window Epoxy/urethane Cable-Length 15 m (49') Connector Bare Wire Deadrise Range Up to 25° with fairing Frequency Low-Medium Low Frequency 28-60 kHz Low Frequency Beamwidth 11°x23°-5°x9° Medium Frequency 80-130 kHz Medium Frequency Beamwidth 13°-8° Housing Material Urethane Max Deadrise Up to 22°
$5,799.00
-
![Airmar 599 Low/High Frequency - In-Hull Chirp Transducer w/o Connector [R599C-LH]](//rebellionmarine.com/cdn/shop/files/64842XL.jpg?crop=center&height=645&v=1734479859&width=645)
Airmar Airmar 599 Low/High Frequency - In-Hull Chirp Transducer w/o Connector [R599C-LH]
Low/High Frequency - In-Hull Chirp Transducer without ConnectorRely on Airmar's new broadband transducers for your ultimate fishing mission. Whether you're a commercial fisherman, charter captain, or tournament angler, there's a new game in town! Chirp transducers enable bottom detection down to 3,000m (10,000') with 5 to 10 times greater detail and resolution so precise it_s possible to distinguish between individual baitfish, game fish, and underwater structures. One transducer delivers up to 112 kHz of total bandwidth in just one installation, saving customers time and money.As the ELITE model in the Chirp In-Hull product line, the R599 LH Chirps across the following bandwidths:LH Model - Low Frequency 28-60 kHz/High Frequency 130-210 kHzFeatures: Depth only Low-CHIRPS from 28 kHz to 60 kHz 23° to 9° beamwidth High-CHIRPS from 130 kHz to 210 kHz 8° to 4° beamwidth 112 kHz of total bandwidth from one transducer Covers popular fishing frequencies of 28, 38, 50, and 200 kHz plus everything else in the bandwidth Fishing Profile: Recreational and commercial inshore and offshore fishing (deep-water canyon and sea-mount tracking) Epoxy transducer housing Hull Type: Solid fiberglass only Specifications: Hull Deadrise: 0° to 22° Acoustic Window: Epoxy/urethane All mounting hardware provided, including tank Weight: 19.7 kg (43.4 lb) This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Mounting Style: In-Hull Box Dimensions: 14"H x 17"W x 28"L WT: 56.4 lbs UPC: 801769001570
$5,737.50
-
Airmar Airmar R509C-LH Low/High Chirp 3KW Thru-Hull Mount Depth/Temp No Connector
Airmar R509 Low-High Chirp, 3kW, w/FB, No Connector, DTModel: R509C-LH Depth and fast-response water-temperature sensing 2 to 3 kW of power for exceptional deep-water performance Low frequency: 28 to 60 kHz, 23° to 9° port-starboard beamwidth, 11° to 5° fore-aft beamwidth, Maximum depth of 3048 m (10000') High frequency: 130 to 210 kHz, 8° to 4° beamwidth, Maximum depth of 457 m (1500') 112 kHz of total bandwidth from one transducer Covers popular fishing frequencies of 50 and 200 kHz plus everything else in the bandwidth Urethane housing with fairing for optimal performance Patented Xducer ID® technology The R509LH is the go-to transducer for today’s top captains who want maximum depth capability combined with the excellent target resolution of the high-frequency band. This powerhouse transducer delivers extreme target detail, bottom discrimination, and bait and game-fish separation at all depths. The R509LH is packed with a twenty-four element, low-frequency array that operates at anywhere between 28 and 60 kHz. The single, high-frequency ceramic operates at any frequency between 130 and 210 kHz and has a narrow, 8° to 4°, beam, delivering amazing target resolution and bottom detail.Specifications Acoustic Window Epoxy/urethane Cable-Length 15 m (49') Connector Bare Wire Deadrise Range Up to 25° with fairing Frequency Low-High Low Frequency 28-60 kHz Low Frequency Beamwidth 11°x23°-5°x9° High Frequency 130-210 kHz High Frequency Beamwidth 8°-4° Housing Material Urethane Max Deadrise Up to 22°
$5,599.00
-
Airmar Airmar CM599C-LHW 3kW CHIRP Pocket/Keel Mount No Connector
Airmar CM599 Low-High Wide Chirp, 3kW, No Connector, Depth and tempModel: CM599C-LHW CM599 Low-High Wide Chirp, 3kW, No Connector, DT 3 kW of power for exceptional deep-water performance 3 kW low frequency: 28 to 60 kHz- 23° to 9° port-starboard beamwidth - 11° to 5° fore-aft beamwidth - Maximum depth of 3048 m (10000') 1 kW high frequency: 150 to 250 kHz - 25° constant beamwidth - Maximum depth of 152 m (500') 132 kHz of total bandwidth from one transducer Covers popular fishing frequencies of 50 and 200 kHz plus everything else in the bandwidth High frequency delivers superior shallow-water performance, bottom detail, and fish-target separation High wide beamwidth yields more coverage for detecting fish in the upper-water column Resin housing with curved-edge design for wet-box installation Designed for custom mounting in a cavity or welded tank Patented Xducer ID® technology Get more coverage under your boat with Airmar’s unique wide-beam, low and high-frequency, Chirp-ready CM599LHW. The high band operates across a frequency range of 150 to 250 kHz and has a fixed 25° beam for all frequencies which results in superior resolution. The constantly wide beam provides twice the coverage and clear fish arches on the display compared to most high-frequency, narrow-beam transducers.The high wide is the ideal choice for both inshore and pelagic fishing, where resolution and maximum coverage under the boat is essential down to 152 m (500'). The low-frequency band is rated to 3 kW and produces amazing deep-water performance to 3048 m (10000'). Get the best of both worlds with Airmar’s Chirp-ready transducer with wide-beam coverage.Specifications Cable-Length 15 m (49') Connector Bare Wire Frequency Band Low-High Wide Functions Depth, Temperature High Frequency 150-250 kHz High-Wide Beamwidth 25° Low Frequency 28-60 kHz Low Frequency Beamwidth 11°x23°-5°x9° Max Depth Low frequency- 3048 m (10000'), High wide frequency- 152 m (500') Mounting Style Tank, Cavity, Pocket/Keel Mount Power Rating 2-3 kW Single or Dual Frequency CHIRP-Ready Dual-Band
$4,999.00
-
![Airmar CM599LH 1-3kW Pocket Mounted Transducer - No Connector [CM599C-LH]](//rebellionmarine.com/cdn/shop/files/101917XL.jpg?crop=center&height=645&v=1735230035&width=645)
Airmar Airmar CM599LH 1-3kW Pocket Mounted Transducer - No Connector [CM599C-LH]
CM599LH 1-3kW Pocket Mounted Transducer - No ConnectorHaving the right tool for the job makes the job easier and gives better results. The right tool for covering deep-water haunts of swordfish, tuna, and other species is a 2 to 3 kW, low and high-frequency transducer. The Chirp-ready CM599LH gives the deep-water performance of the low frequency down to 3000 m (10000') plus the incredible resolution that the high-frequency band delivers.The CM599LH is packed with a twenty-four-element, low-frequency array that operates at anywhere between 28 and 60 kHz. The single, high-frequency ceramic operates at any frequency between 130 and 210 kHz and has a narrow, 8° to 4°, beamwidth.Features: Depth and fast-response water-temperature sensing 2 to 3 kW of power for exceptional deep-water performance Low frequency: 28 to 60 kHz 23° to 9° port-starboard beamwidth 11° to 5° fore-aft beamwidth Maximum depth to 3048 m (10000') High frequency: 130 to 210 kHz 8° to 4° beamwidth Maximum depth to 457 m (1500') 112 kHz of total bandwidth from one transducer Covers popular fishing frequencies of 50 and 200 kHz plus everything else in the bandwidth Resin housing with curved-edge design for wet-box installation Can be installed in a cavity or welded tank Also available as thru-hull external (R509LH) and in-hull (R599LH) mounts Patented Xducer ID® technology Specifications: Frequency Band: Low-High Functions: Depth, Temperature Material: Urethane Mounting Style: Tank, Cavity, Pocket/Keel Mount Connector: Bare Wire Display Connector: 0 Hull Material: Fiberglass or metal Max Vessel LOA: 8 m (25') and above High Frequency: 130-210 kHz Common Use: Fishing, Commercial Fishing Max Deadrise Angle: Any Tilted Element: No Low Frequency Beamwidth: 11°x23°-5°x9° Low Frequency: 28-60 kHz High Frequency Beamwidth: 8°-4° Max Deadrise: Accommodates any deadrise angle based on custom installation Power Rating: 2-3 kW Single or Dual Frequency: CHIRP-Ready Dual-Band Country of Origin: USA Cable-Length: 15 m (49') Weight: 14.2 kg (31.2 lb.) Max Depth: Low frequency- 3048 m (10000'), High frequency- 457 m (1500') This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Quick Guide (pdf)Brochure (pdf)
$4,399.00
-
Airmar Airmar R109C-LHW Transducer Low High Wide Beam
Get more coverage under the boat with Airmar's new wide beam CHIRP product line. Offering a high frequency range of 150-250kHz and a constant 25 degree beamwidth, these transducers are truly broadband at it's best. In addition to improving the performance of CHIRP-ready echosounders, anglers using the new wide beam transducers will achieve twice the coverage under the boat compared to our current high frequency CHIRP transducers. A unique property of the new high frequency transducers is that the beamwidth is a constant 25 degree angle across the entire frequency band. Traditionally, high frequency transducers have narrow beamwidths that change with frequency. Now, in addition to providing vast bottom coverage and precise fish detection in the upper water column that can sometimes go unseen with current narrow beam transducers, Airmar's new wide beam format also creates crisper and larger return images on the display. Features Ideal for marking baitfish and game fish in shallow to mid-water depths of 300ft - 600ft Depth & fast-response water-temperature sensor CHIRPs across the following bandwidths: Low Frequency 38 to 75 kHz High Frequency 150 to 250 kHz Covers popular fishing frequencies of 50 and 200 kHz plus everything else in the bandwidth 16 internal Broadband Ceramics Depth & fast response water-temperature sensor Urethane housing with stuffing tube and high-performance fairing Boat size: 12 m (40?) Boat Type: Sportfishing, Commercial Hull Type Fiberglass, Wood, Metal Can retrofit to existing R99 install
$4,199.00
-
Airmar Furuno R109LH Transducer
Furuno R109LH Chirp-ready External MountModel: R109LH Depth and fast-response water-temperature sensor 2 kW Low frequency: 38 to 75 kHz High frequency: 130 to 210 kHz 117 kHz of total bandwidth from one transducer Covers popular fishing frequencies of 50, 60, and 200 kHz plus everything else in the bandwidth Urethane housing with fairing for optimal performance The R109LH is an externally mounted, 2 kW transducer which delivers excellent target resolution, bottom discrimination, and bait and game-fish separation. The R109LH is packed with a fifteen-element, low-frequency array that operates at anywhere between 38 and 75 kHz, delivering great depth capability down to 1,829 m (6,000').The single, high-frequency ceramic operates at any frequency between 130 and 210 kHz and has a narrow (8° to 4°) beam that provide tremendous bottom detail and fish-target discrimination at depths to 457 m (1,500').Specifications Beam Angle Low 19° to 10° port-starboard beamwidth Beam Angle High 8° to 4° beamwidth Maximum Depth Low Maximum depth of 1,829 m (6,000') Maximum Depth high Maximum depth of 1,829 m (6,000') Hull Material Compatible with all hull materials Hull Deadrise 0° to 22° What's in the Box: R109LH Transducer fairing Mounting hardware
$3,523.43
-
Airmar Airmar B275C-LHW Transducer With 2 - 7-Pin Navico MMC
Airmar B275C-LHW Wide Beam CHIRP Bronze Thru-Hull Transducer with Navico Dual 7-Pin BL Chirp Y-Cable - 1m Model: B275C-LHW-BL2 Depth & fast-response water-temperature sensor 123 kHz of total bandwidth from one transducer Covers popular fishing frequencies of 50 and 200 kHz plus everything else in the bandwidth Get more coverage under the boat with Airmar's new wide beam Chirp product line. Offering a high frequency range of 150-250 kHz and a constant 25° beam width, these transducers are truly broadband at its best. In addition to improving the performance of Chirp-ready echosounders, anglers using the new wide beam transducers will achieve twice the coverage under the boat compared to our current high frequency Chirp transducers. A unique property of the new high frequency transducers is that the beam width is a constant 25° angle across the entire frequency band. Now, in addition to providing vast bottom coverage and precise fish detection in the upper water column that can sometimes go unseen with our narrow beam transducers, Airmar's new wide beam format also creates crisper and larger return images on the display. We've got you covered. Specifications Low Frequency CHIRPS from 42 kHz to 65 kHz ?25° to 16° beamwidth High Frequency CHIRPS from 150 kHz to 250 kHz ?25° constant beamwidth Boat size 8 m (25’) and above Hull type Fiberglass or wood Hull deadrise Up to 20° with fairing block Acoustic window Urethane What's in the Box: B275CLHW-MM Fairing block and hardware MMC-BL2 - Navico Dual 7-Pin BL Chirp Y-Cable - 1m
$2,599.00
-
Airmar Airmar B275C-LHW Transducer With 2 - 9-Pin Navico MMC
Airmar B275C-LHW Wide Beam CHIRP Bronze Thru-Hull Transducer with Navico (2) 9 pin M&M Chirp Cable - 1m Model: B275C-LHW-9N2 Depth & fast-response water-temperature sensor 123 kHz of total bandwidth from one transducer Covers popular fishing frequencies of 50 and 200 kHz plus everything else in the bandwidth Get more coverage under the boat with Airmar's new wide beam Chirp product line. Offering a high frequency range of 150-250 kHz and a constant 25° beam width, these transducers are truly broadband at its best. In addition to improving the performance of Chirp-ready echosounders, anglers using the new wide beam transducers will achieve twice the coverage under the boat compared to our current high frequency Chirp transducers. A unique property of the new high frequency transducers is that the beam width is a constant 25° angle across the entire frequency band. Now, in addition to providing vast bottom coverage and precise fish detection in the upper water column that can sometimes go unseen with our narrow beam transducers, Airmar's new wide beam format also creates crisper and larger return images on the display. We've got you covered. Specifications Low Frequency CHIRPS from 42 kHz to 65 kHz ?25° to 16° beamwidth High Frequency CHIRPS from 150 kHz to 250 kHz ?25° constant beamwidth Boat size 8 m (25’) and above Hull type Fiberglass or wood Hull deadrise Up to 20° with fairing block Acoustic window Urethane What's in the Box: B275CLHW-MM Fairing block and hardware MMC-9N2 - Navico (2) 9 pin M&M Chirp Cable - 1m
$2,599.00
-
Airmar Airmar B275C-LHW Transducer With 12-Pin Garmin MMC
Airmar B275C-LHW Wide Beam CHIRP Bronze Thru-Hull Transducer with Garmin 12 pin M&M Chirp Cable - 1m Model: B275C-LHW-12G Depth & fast-response water-temperature sensor 123 kHz of total bandwidth from one transducer Covers popular fishing frequencies of 50 and 200 kHz plus everything else in the bandwidth Get more coverage under the boat with Airmar's new wide beam Chirp product line. Offering a high frequency range of 150-250 kHz and a constant 25° beam width, these transducers are truly broadband at its best. In addition to improving the performance of Chirp-ready echosounders, anglers using the new wide beam transducers will achieve twice the coverage under the boat compared to our current high frequency Chirp transducers. A unique property of the new high frequency transducers is that the beam width is a constant 25° angle across the entire frequency band. Now, in addition to providing vast bottom coverage and precise fish detection in the upper water column that can sometimes go unseen with our narrow beam transducers, Airmar's new wide beam format also creates crisper and larger return images on the display. We've got you covered. Specifications Low Frequency CHIRPS from 42 kHz to 65 kHz ?25° to 16° beamwidth High Frequency CHIRPS from 150 kHz to 250 kHz ?25° constant beamwidth Boat size 8 m (25’) and above Hull type Fiberglass or wood Hull deadrise Up to 20° with fairing block Acoustic window Urethane What's in the Box: B275CLHW-MM Fairing block and hardware MMC-12G - Garmin 12 pin M&M Chirp Cable - 1m
$2,599.00
-
Airmar Airmar B275C-LHW Transducer With 11-Pin Raymarine MMC
Airmar B275C-LHW Wide Beam CHIRP Bronze Thru-Hull Transducer with Raymarine 11-Pin Low/Dual Beam Mix-n-Match Cable Model: B275C-LHW-11R Depth & fast-response water-temperature sensor 123 kHz of total bandwidth from one transducer Covers popular fishing frequencies of 50 and 200 kHz plus everything else in the bandwidth Get more coverage under the boat with Airmar's new wide beam Chirp product line. Offering a high frequency range of 150-250 kHz and a constant 25° beam width, these transducers are truly broadband at its best. In addition to improving the performance of Chirp-ready echosounders, anglers using the new wide beam transducers will achieve twice the coverage under the boat compared to our current high frequency Chirp transducers. A unique property of the new high frequency transducers is that the beam width is a constant 25° angle across the entire frequency band. Now, in addition to providing vast bottom coverage and precise fish detection in the upper water column that can sometimes go unseen with our narrow beam transducers, Airmar's new wide beam format also creates crisper and larger return images on the display. We've got you covered. Specifications Low Frequency CHIRPS from 42 kHz to 65 kHz ?25° to 16° beamwidth High Frequency CHIRPS from 150 kHz to 250 kHz ?25° constant beamwidth Boat size 8 m (25’) and above Hull type Fiberglass or wood Hull deadrise Up to 20° with fairing block Acoustic window Urethane What's in the Box: B275CLHW-MM Fairing block and hardware MMC-11R-LDB - Raymarine 11 pin M&M Chirp Cable - Low and Dual-Band
$2,599.00
-
Airmar Airmar B275C-LHW-MM Transducer Low High Wide Beam
Airmar B275C-LHW Wide Beam CHIRP Bronze Thru-Hull Transducer Model: B275C-LHW-MM Depth & fast-response water-temperature sensor 123 kHz of total bandwidth from one transducer Covers popular fishing frequencies of 50 and 200 kHz plus everything else in the bandwidth Get more coverage under the boat with Airmar's new wide beam Chirp product line. Offering a high frequency range of 150-250 kHz and a constant 25° beam width, these transducers are truly broadband at its best. In addition to improving the performance of Chirp-ready echosounders, anglers using the new wide beam transducers will achieve twice the coverage under the boat compared to our current high frequency Chirp transducers. A unique property of the new high frequency transducers is that the beam width is a constant 25° angle across the entire frequency band. Now, in addition to providing vast bottom coverage and precise fish detection in the upper water column that can sometimes go unseen with our narrow beam transducers, Airmar's new wide beam format also creates crisper and larger return images on the display. We've got you covered. Specifications Low Frequency CHIRPS from 42 kHz to 65 kHz ?25° to 16° beamwidth High Frequency CHIRPS from 150 kHz to 250 kHz ?25° constant beamwidth Boat size 8 m (25’) and above Hull type Fiberglass or wood Hull deadrise Up to 20° with fairing block Acoustic window Urethane What's in the Box: B275CLHW Fairing block and hardware
$2,464.00
-
![Airmar B275C-LHW Bronze Thru-Hull - Low High Wide Frequency - Requires Mix Match Cable [B275C-LHW-MM]](//rebellionmarine.com/cdn/shop/products/66384XL.jpg?crop=center&height=645&v=1656108366&width=645)
Airmar Airmar B275C-LHW Bronze Thru-Hull - Low High Wide Frequency - Requires Mix Match Cable [B275C-LHW-MM]
B275C-LHW Bronze Thru-Hull - Low & High Wide FrequencyRequires Mix & Match CableGet more coverage under the boat with Airmar's wide beam CHIRP product line. Offering a high frequency range of 150-250 kHz and a constant 25° beam width, these transducers are truly broadband at its best. In addition to improving the performance of CHIRP-ready echosounders, anglers using the new wide beam transducers will achieve twice the coverage under the boat compared to our current high frequency CHIRP transducers.A unique property of the high frequency transducers is that the beambwidth is a constant 25° angle across the entire frequency band. Now, in addition to providing vast bottom coverage and precise fish detection in the upper water column that can sometimes go unseen with our narrow beam transducers, Airmar's wide beam format also creates crisper and larger return images on the display. We've got you covered!Features: Depth & Temperature 42-65 kHz L Frequency 150-250 kHz H Frequency Bronze 1 kW Wide 25° Beam This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Mounting Style: Thru-Hull Chirp: Low/High Wide Box Dimensions: 7"H x 18"W x 25"L WT: 24.1 lbs UPC: 801769001952 Quick Guide (pdf)
$2,464.00
-
Airmar Airmar PM275C-LHW Transducer Low High Wide CHIRP With Mix-N-Match Plug
Airmar PM275C-LHW TransducerLow High Wide CHIRPModel: 41-694-2-01 Ideal for marking baitfish and game fish in shallow to mid-water depths of 300ft - 600ft Depth & fast-response water-temperature sensor Low—CHIRPS from 42 kHz to 65 kHz 25° to 16° beamwidth High—CHIRPS from 150 kHz to 250 kHz 25° constant beamwidth 123 kHz of total bandwidth from one transducer Covers popular fishing frequencies of 50 and 200 kHz plus everything else in the bandwidth Boat Size: 8 m (25’) and above Hull Type: Fiberglass or wood Exclusive Xducer ID® technology Get more coverage under the boat with Airmar's new wide beam Chirp product line. Offering a high frequency range of 150-250 kHz and a constant 25° beam width, these transducers are truly broadband at its best. In addition to improving the performance of Chirp-ready echosounders, anglers using the new wide beam transducers will achieve twice the coverage under the boat compared to our current high frequency Chirp transducers.A unique property of the new high frequency transducers is that the beam width is a constant 25° angle across the entire frequency band. Now, in addition to providing vast bottom coverage and precise fish detection in the upper water column that can sometimes go unseen with our narrow beam transducers, Airmar's new wide beam format also creates crisper and larger return images on the display. We've got you covered.Specifications Hull deadrise N/A Acoustic window Urethane Weight 5.25 kg (11.585 lb)
$2,264.00
-
Airmar Airmar SS175C-12-MW 12d Tilt Medium CHIRP Ultra Wide With Humminbird 9-Pin MMC
Airmar SS175MW Medium Ultra-Wide 12 deg Tilted Element™ Thru-Hull - With MMC-HB Humminbird 9-Pin Mix-N-Match CableModel: SS175C-12-MW-HB Fixed 12° tilted version for 8° to 15° hull deadrise Depth and fast-response water-temperature sensor 1 kW with depth tracking down to 400 m (1,300#39;) Medium frequency: 60-100 kHz 57° to 73° beamwidth (port/starboard) 16° average fore/aft 40 kHz of total bandwidth from one transducer Medium frequency for superior mid-depth performance and excellent fish-target separation Low-profile, thru-hull housing yields good resolution at speed when installed properly Exclusive Xducer ID® technology AIRMAR’s innovative transducer designs have revolutionized the fishing world, and they continue to do so with the NEW Chirp-ready SS175 Medium Ultra-Wide (MW) Tilted Element™ Thru-hull transducer. The SS175MW takes transducer design and performance to a whole new level by using medium frequency (60-100 kHz) with an incredible ultra-wide beamwidth ranging from 57-73° port-starboard to 16° average fore-aft. Maximum coverage under the boat is achieved with this medium-frequency transducer, serving anglers who target pelagic species in the upper water column.Airmar’s new Medium Ultra-Wide models are perfect for seeking deeper species with a frequency band from 60-100 kHz. When paired with our other popular models such as the B275LHW, provides the angler with a broad set of frequencies (Low, Medium-Wide, High-Wide) to interrogate targets from deep to shallow.The SS175MW Tilted Element Thru-hull is a 1 kW transducer housed in one of AIRMAR’s most popular Tilted Element housings which includes a ceramic element fixed at a 20°, 12° or 0° angle. Because the transducer is installed almost flush to the hull, the tilted element corrects for the hull deadrise and orients the ceramic element vertically to ensure maximum echo returns to the transducer.Specifications Power Rating 1 kW Max Deadrise Angle 24° Housing Stainless Steel Functions Depth, Temperature Hull Material All hull materials Max Vessel LOA Up to 11 m (36') Hole Size 95 mm (3-3/4") Mounting Style Tilted Element Thru-Hull Acoustic Window Urethane Cable-Length 9 m (30') Max Depth 400 m (1300') Medium Frequency 60-100 kHz Medium Frequency Beamwidth 57° to 73° (Port/Starboard) X 16° average (Fore/Aft) Single or Dual Frequency CHIRP-Ready Single-Band Water Temperature -10° to 40°C (14° to 104°F) Weight 2.7 kg (6 lb.) What's in the Box: SS175C-12-MW-MM Medium CHIRP 12° Tilted Element MMC-HB Humminbird 9-Pin Mix-N-Match Cable
$2,199.00
-
Airmar Airmar SS175C-12-MW 12d Tilt Medium CHIRP Ultra Wide With Garmin 8-Pin MMC
Airmar SS175MW Medium Ultra-Wide 12 deg Tilted Element™ Thru-Hull - With MMC-8 Garmin 8-Pin Mix-N-Match CableModel: SS175C-12-MW-8G Fixed 12° tilted version for 8° to 15° hull deadrise Depth and fast-response water-temperature sensor 1 kW with depth tracking down to 400 m (1,300#39;) Medium frequency: 60-100 kHz 57° to 73° beamwidth (port/starboard) 16° average fore/aft 40 kHz of total bandwidth from one transducer Medium frequency for superior mid-depth performance and excellent fish-target separation Low-profile, thru-hull housing yields good resolution at speed when installed properly Exclusive Xducer ID® technology AIRMAR’s innovative transducer designs have revolutionized the fishing world, and they continue to do so with the NEW Chirp-ready SS175 Medium Ultra-Wide (MW) Tilted Element™ Thru-hull transducer. The SS175MW takes transducer design and performance to a whole new level by using medium frequency (60-100 kHz) with an incredible ultra-wide beamwidth ranging from 57-73° port-starboard to 16° average fore-aft. Maximum coverage under the boat is achieved with this medium-frequency transducer, serving anglers who target pelagic species in the upper water column.Airmar’s new Medium Ultra-Wide models are perfect for seeking deeper species with a frequency band from 60-100 kHz. When paired with our other popular models such as the B275LHW, provides the angler with a broad set of frequencies (Low, Medium-Wide, High-Wide) to interrogate targets from deep to shallow.The SS175MW Tilted Element Thru-hull is a 1 kW transducer housed in one of AIRMAR’s most popular Tilted Element housings which includes a ceramic element fixed at a 20°, 12° or 0° angle. Because the transducer is installed almost flush to the hull, the tilted element corrects for the hull deadrise and orients the ceramic element vertically to ensure maximum echo returns to the transducer.Specifications Power Rating 1 kW Max Deadrise Angle 24° Housing Stainless Steel Functions Depth, Temperature Hull Material All hull materials Max Vessel LOA Up to 11 m (36') Hole Size 95 mm (3-3/4") Mounting Style Tilted Element Thru-Hull Acoustic Window Urethane Cable-Length 9 m (30') Max Depth 400 m (1300') Medium Frequency 60-100 kHz Medium Frequency Beamwidth 57° to 73° (Port/Starboard) X 16° average (Fore/Aft) Single or Dual Frequency CHIRP-Ready Single-Band Water Temperature -10° to 40°C (14° to 104°F) Weight 2.7 kg (6 lb.) What's in the Box: SS175C-12-MW-MM Medium CHIRP 12° Tilted Element MMC-8 Garmin 8-Pin Mix-N-Match Cable
$2,199.00
-
Airmar Airmar SS175C-12-MW 12d Tilt Medium CHIRP Ultra Wide With Humminbird 21-Pin MMC
Airmar SS175MW Medium Ultra-Wide 12 deg Tilted Element™ Thru-Hull - With MMC-21 Humminbird 21-Pin Mix-N-Match CableModel: SS175C-12-MW-21HB Fixed 12° tilted version for 8° to 15° hull deadrise Depth and fast-response water-temperature sensor 1 kW with depth tracking down to 400 m (1,300#39;) Medium frequency: 60-100 kHz 57° to 73° beamwidth (port/starboard) 16° average fore/aft 40 kHz of total bandwidth from one transducer Medium frequency for superior mid-depth performance and excellent fish-target separation Low-profile, thru-hull housing yields good resolution at speed when installed properly Exclusive Xducer ID® technology AIRMAR’s innovative transducer designs have revolutionized the fishing world, and they continue to do so with the NEW Chirp-ready SS175 Medium Ultra-Wide (MW) Tilted Element™ Thru-hull transducer. The SS175MW takes transducer design and performance to a whole new level by using medium frequency (60-100 kHz) with an incredible ultra-wide beamwidth ranging from 57-73° port-starboard to 16° average fore-aft. Maximum coverage under the boat is achieved with this medium-frequency transducer, serving anglers who target pelagic species in the upper water column.Airmar’s new Medium Ultra-Wide models are perfect for seeking deeper species with a frequency band from 60-100 kHz. When paired with our other popular models such as the B275LHW, provides the angler with a broad set of frequencies (Low, Medium-Wide, High-Wide) to interrogate targets from deep to shallow.The SS175MW Tilted Element Thru-hull is a 1 kW transducer housed in one of AIRMAR’s most popular Tilted Element housings which includes a ceramic element fixed at a 20°, 12° or 0° angle. Because the transducer is installed almost flush to the hull, the tilted element corrects for the hull deadrise and orients the ceramic element vertically to ensure maximum echo returns to the transducer.Specifications Power Rating 1 kW Max Deadrise Angle 24° Housing Stainless Steel Functions Depth, Temperature Hull Material All hull materials Max Vessel LOA Up to 11 m (36') Hole Size 95 mm (3-3/4") Mounting Style Tilted Element Thru-Hull Acoustic Window Urethane Cable-Length 9 m (30') Max Depth 400 m (1300') Medium Frequency 60-100 kHz Medium Frequency Beamwidth 57° to 73° (Port/Starboard) X 16° average (Fore/Aft) Single or Dual Frequency CHIRP-Ready Single-Band Water Temperature -10° to 40°C (14° to 104°F) Weight 2.7 kg (6 lb.) What's in the Box: SS175C-12-MW-MM Medium CHIRP 12° Tilted Element MMC-21 Humminbird 21-Pin Mix-N-Match Cable
$2,199.00
-
Airmar Airmar SS175C-12-MW 12d Tilt Medium CHIRP Ultra Wide With Humminbird 14-Pin MMC
Airmar SS175MW Medium Ultra-Wide 12 deg Tilted Element™ Thru-Hull - With MMC-14X Humminbird 14-Pin Mix-N-Match CableModel: SS175C-12-MW-14HB Fixed 12° tilted version for 8° to 15° hull deadrise Depth and fast-response water-temperature sensor 1 kW with depth tracking down to 400 m (1,300#39;) Medium frequency: 60-100 kHz 57° to 73° beamwidth (port/starboard) 16° average fore/aft 40 kHz of total bandwidth from one transducer Medium frequency for superior mid-depth performance and excellent fish-target separation Low-profile, thru-hull housing yields good resolution at speed when installed properly Exclusive Xducer ID® technology AIRMAR’s innovative transducer designs have revolutionized the fishing world, and they continue to do so with the NEW Chirp-ready SS175 Medium Ultra-Wide (MW) Tilted Element™ Thru-hull transducer. The SS175MW takes transducer design and performance to a whole new level by using medium frequency (60-100 kHz) with an incredible ultra-wide beamwidth ranging from 57-73° port-starboard to 16° average fore-aft. Maximum coverage under the boat is achieved with this medium-frequency transducer, serving anglers who target pelagic species in the upper water column.Airmar’s new Medium Ultra-Wide models are perfect for seeking deeper species with a frequency band from 60-100 kHz. When paired with our other popular models such as the B275LHW, provides the angler with a broad set of frequencies (Low, Medium-Wide, High-Wide) to interrogate targets from deep to shallow.The SS175MW Tilted Element Thru-hull is a 1 kW transducer housed in one of AIRMAR’s most popular Tilted Element housings which includes a ceramic element fixed at a 20°, 12° or 0° angle. Because the transducer is installed almost flush to the hull, the tilted element corrects for the hull deadrise and orients the ceramic element vertically to ensure maximum echo returns to the transducer.Specifications Power Rating 1 kW Max Deadrise Angle 24° Housing Stainless Steel Functions Depth, Temperature Hull Material All hull materials Max Vessel LOA Up to 11 m (36') Hole Size 95 mm (3-3/4") Mounting Style Tilted Element Thru-Hull Acoustic Window Urethane Cable-Length 9 m (30') Max Depth 400 m (1300') Medium Frequency 60-100 kHz Medium Frequency Beamwidth 57° to 73° (Port/Starboard) X 16° average (Fore/Aft) Single or Dual Frequency CHIRP-Ready Single-Band Water Temperature -10° to 40°C (14° to 104°F) Weight 2.7 kg (6 lb.) What's in the Box: SS175C-12-MW-MM Medium CHIRP 12° Tilted Element MMC-14X Humminbird 14-Pin Mix-N-Match Cable
$2,199.00
-
Airmar Airmar SS175C-12-MW 12d Tilt Medium CHIRP Ultra Wide With Garmin 12-Pin MMC
Airmar SS175MW Medium Ultra-Wide 12 deg Tilted Element™ Thru-Hull - With MMC-12 Garmin 12-Pin Mix-N-Match CableModel: SS175C-12-MW-12G Fixed 12° tilted version for 8° to 15° hull deadrise Depth and fast-response water-temperature sensor 1 kW with depth tracking down to 400 m (1,300#39;) Medium frequency: 60-100 kHz 57° to 73° beamwidth (port/starboard) 16° average fore/aft 40 kHz of total bandwidth from one transducer Medium frequency for superior mid-depth performance and excellent fish-target separation Low-profile, thru-hull housing yields good resolution at speed when installed properly Exclusive Xducer ID® technology AIRMAR’s innovative transducer designs have revolutionized the fishing world, and they continue to do so with the NEW Chirp-ready SS175 Medium Ultra-Wide (MW) Tilted Element™ Thru-hull transducer. The SS175MW takes transducer design and performance to a whole new level by using medium frequency (60-100 kHz) with an incredible ultra-wide beamwidth ranging from 57-73° port-starboard to 16° average fore-aft. Maximum coverage under the boat is achieved with this medium-frequency transducer, serving anglers who target pelagic species in the upper water column.Airmar’s new Medium Ultra-Wide models are perfect for seeking deeper species with a frequency band from 60-100 kHz. When paired with our other popular models such as the B275LHW, provides the angler with a broad set of frequencies (Low, Medium-Wide, High-Wide) to interrogate targets from deep to shallow.The SS175MW Tilted Element Thru-hull is a 1 kW transducer housed in one of AIRMAR’s most popular Tilted Element housings which includes a ceramic element fixed at a 20°, 12° or 0° angle. Because the transducer is installed almost flush to the hull, the tilted element corrects for the hull deadrise and orients the ceramic element vertically to ensure maximum echo returns to the transducer.Specifications Power Rating 1 kW Max Deadrise Angle 24° Housing Stainless Steel Functions Depth, Temperature Hull Material All hull materials Max Vessel LOA Up to 11 m (36') Hole Size 95 mm (3-3/4") Mounting Style Tilted Element Thru-Hull Acoustic Window Urethane Cable-Length 9 m (30') Max Depth 400 m (1300') Medium Frequency 60-100 kHz Medium Frequency Beamwidth 57° to 73° (Port/Starboard) X 16° average (Fore/Aft) Single or Dual Frequency CHIRP-Ready Single-Band Water Temperature -10° to 40°C (14° to 104°F) Weight 2.7 kg (6 lb.) What's in the Box: SS175C-12-MW-MM Medium CHIRP 12° Tilted Element MMC-12 Garmin 12-Pin Mix-N-Match Cable
$2,199.00
-
Airmar Airmar SS175C-12-MW 12d Tilt Medium CHIRP Ultra Wide With Furuno 12-Pin MMC
Airmar SS175MW Medium Ultra-Wide 12 deg Tilted Element™ Thru-Hull - With MMC-12F Furuno 12-Pin Mix-N-Match CableModel: SS175C-12-MW-12F Fixed 12° tilted version for 8° to 15° hull deadrise Depth and fast-response water-temperature sensor 1 kW with depth tracking down to 400 m (1,300#39;) Medium frequency: 60-100 kHz 57° to 73° beamwidth (port/starboard) 16° average fore/aft 40 kHz of total bandwidth from one transducer Medium frequency for superior mid-depth performance and excellent fish-target separation Low-profile, thru-hull housing yields good resolution at speed when installed properly Exclusive Xducer ID® technology AIRMAR’s innovative transducer designs have revolutionized the fishing world, and they continue to do so with the NEW Chirp-ready SS175 Medium Ultra-Wide (MW) Tilted Element™ Thru-hull transducer. The SS175MW takes transducer design and performance to a whole new level by using medium frequency (60-100 kHz) with an incredible ultra-wide beamwidth ranging from 57-73° port-starboard to 16° average fore-aft. Maximum coverage under the boat is achieved with this medium-frequency transducer, serving anglers who target pelagic species in the upper water column.Airmar’s new Medium Ultra-Wide models are perfect for seeking deeper species with a frequency band from 60-100 kHz. When paired with our other popular models such as the B275LHW, provides the angler with a broad set of frequencies (Low, Medium-Wide, High-Wide) to interrogate targets from deep to shallow.The SS175MW Tilted Element Thru-hull is a 1 kW transducer housed in one of AIRMAR’s most popular Tilted Element housings which includes a ceramic element fixed at a 20°, 12° or 0° angle. Because the transducer is installed almost flush to the hull, the tilted element corrects for the hull deadrise and orients the ceramic element vertically to ensure maximum echo returns to the transducer.Specifications Power Rating 1 kW Max Deadrise Angle 24° Housing Stainless Steel Functions Depth, Temperature Hull Material All hull materials Max Vessel LOA Up to 11 m (36') Hole Size 95 mm (3-3/4") Mounting Style Tilted Element Thru-Hull Acoustic Window Urethane Cable-Length 9 m (30') Max Depth 400 m (1300') Medium Frequency 60-100 kHz Medium Frequency Beamwidth 57° to 73° (Port/Starboard) X 16° average (Fore/Aft) Single or Dual Frequency CHIRP-Ready Single-Band Water Temperature -10° to 40°C (14° to 104°F) Weight 2.7 kg (6 lb.) What's in the Box: SS175C-12-MW-MM Medium CHIRP 12° Tilted Element MMC-12F Furuno 12-Pin Mix-N-Match Cable
$2,199.00
-
Airmar Airmar SS175C-12-MW 12d Tilt Medium CHIRP Ultra Wide With Raymarine 11-Pin MMC
Airmar SS175MW Medium Ultra-Wide 12 deg Tilted Element™ Thru-Hull - With MMC-11RHM Raymarine 11-Pin Mix-N-Match CableModel: SS175C-12-MW-11R Fixed 12° tilted version for 8° to 15° hull deadrise Depth and fast-response water-temperature sensor 1 kW with depth tracking down to 400 m (1,300#39;) Medium frequency: 60-100 kHz 57° to 73° beamwidth (port/starboard) 16° average fore/aft 40 kHz of total bandwidth from one transducer Medium frequency for superior mid-depth performance and excellent fish-target separation Low-profile, thru-hull housing yields good resolution at speed when installed properly Exclusive Xducer ID® technology AIRMAR’s innovative transducer designs have revolutionized the fishing world, and they continue to do so with the NEW Chirp-ready SS175 Medium Ultra-Wide (MW) Tilted Element™ Thru-hull transducer. The SS175MW takes transducer design and performance to a whole new level by using medium frequency (60-100 kHz) with an incredible ultra-wide beamwidth ranging from 57-73° port-starboard to 16° average fore-aft. Maximum coverage under the boat is achieved with this medium-frequency transducer, serving anglers who target pelagic species in the upper water column.Airmar’s new Medium Ultra-Wide models are perfect for seeking deeper species with a frequency band from 60-100 kHz. When paired with our other popular models such as the B275LHW, provides the angler with a broad set of frequencies (Low, Medium-Wide, High-Wide) to interrogate targets from deep to shallow.The SS175MW Tilted Element Thru-hull is a 1 kW transducer housed in one of AIRMAR’s most popular Tilted Element housings which includes a ceramic element fixed at a 20°, 12° or 0° angle. Because the transducer is installed almost flush to the hull, the tilted element corrects for the hull deadrise and orients the ceramic element vertically to ensure maximum echo returns to the transducer.Specifications Power Rating 1 kW Max Deadrise Angle 24° Housing Stainless Steel Functions Depth, Temperature Hull Material All hull materials Max Vessel LOA Up to 11 m (36') Hole Size 95 mm (3-3/4") Mounting Style Tilted Element Thru-Hull Acoustic Window Urethane Cable-Length 9 m (30') Max Depth 400 m (1300') Medium Frequency 60-100 kHz Medium Frequency Beamwidth 57° to 73° (Port/Starboard) X 16° average (Fore/Aft) Single or Dual Frequency CHIRP-Ready Single-Band Water Temperature -10° to 40°C (14° to 104°F) Weight 2.7 kg (6 lb.) What's in the Box: SS175C-12-MW-MM Medium CHIRP 12° Tilted Element MMC-11RHM Raymarine 11-Pin Mix-N-Match Cable
$2,199.00
-
Airmar Airmar SS175C-12-MW 12d Tilt Medium CHIRP Ultra Wide With Furuno 10-Pin MMC
Airmar SS175MW Medium Ultra-Wide 12 deg Tilted Element™ Thru-Hull - With MMC-10F Furuno 10-Pin Mix-N-Match CableModel: SS175C-12-MW-10F Fixed 12° tilted version for 8° to 15° hull deadrise Depth and fast-response water-temperature sensor 1 kW with depth tracking down to 400 m (1,300#39;) Medium frequency: 60-100 kHz 57° to 73° beamwidth (port/starboard) 16° average fore/aft 40 kHz of total bandwidth from one transducer Medium frequency for superior mid-depth performance and excellent fish-target separation Low-profile, thru-hull housing yields good resolution at speed when installed properly Exclusive Xducer ID® technology AIRMAR’s innovative transducer designs have revolutionized the fishing world, and they continue to do so with the NEW Chirp-ready SS175 Medium Ultra-Wide (MW) Tilted Element™ Thru-hull transducer. The SS175MW takes transducer design and performance to a whole new level by using medium frequency (60-100 kHz) with an incredible ultra-wide beamwidth ranging from 57-73° port-starboard to 16° average fore-aft. Maximum coverage under the boat is achieved with this medium-frequency transducer, serving anglers who target pelagic species in the upper water column.Airmar’s new Medium Ultra-Wide models are perfect for seeking deeper species with a frequency band from 60-100 kHz. When paired with our other popular models such as the B275LHW, provides the angler with a broad set of frequencies (Low, Medium-Wide, High-Wide) to interrogate targets from deep to shallow.The SS175MW Tilted Element Thru-hull is a 1 kW transducer housed in one of AIRMAR’s most popular Tilted Element housings which includes a ceramic element fixed at a 20°, 12° or 0° angle. Because the transducer is installed almost flush to the hull, the tilted element corrects for the hull deadrise and orients the ceramic element vertically to ensure maximum echo returns to the transducer.Specifications Power Rating 1 kW Max Deadrise Angle 24° Housing Stainless Steel Functions Depth, Temperature Hull Material All hull materials Max Vessel LOA Up to 11 m (36') Hole Size 95 mm (3-3/4") Mounting Style Tilted Element Thru-Hull Acoustic Window Urethane Cable-Length 9 m (30') Max Depth 400 m (1300') Medium Frequency 60-100 kHz Medium Frequency Beamwidth 57° to 73° (Port/Starboard) X 16° average (Fore/Aft) Single or Dual Frequency CHIRP-Ready Single-Band Water Temperature -10° to 40°C (14° to 104°F) Weight 2.7 kg (6 lb.) What's in the Box: SS175C-12-MW-MM Medium CHIRP 12° Tilted Element MMC-10F Furuno 10-Pin Mix-N-Match Cable
$2,199.00
-
Airmar Airmar SS175C-12-MW 12d Tilt Medium CHIRP Ultra Wide With Bare Wire MMC
Airmar SS175MW Medium Ultra-Wide 12 deg Tilted Element™ Thru-Hull - With MMC-0 Bare Wire Mix-N-Match CableModel: SS175C-12-MW-0 Fixed 12° tilted version for 8° to 15° hull deadrise Depth and fast-response water-temperature sensor 1 kW with depth tracking down to 400 m (1,300#39;) Medium frequency: 60-100 kHz 57° to 73° beamwidth (port/starboard) 16° average fore/aft 40 kHz of total bandwidth from one transducer Medium frequency for superior mid-depth performance and excellent fish-target separation Low-profile, thru-hull housing yields good resolution at speed when installed properly Exclusive Xducer ID® technology AIRMAR’s innovative transducer designs have revolutionized the fishing world, and they continue to do so with the NEW Chirp-ready SS175 Medium Ultra-Wide (MW) Tilted Element™ Thru-hull transducer. The SS175MW takes transducer design and performance to a whole new level by using medium frequency (60-100 kHz) with an incredible ultra-wide beamwidth ranging from 57-73° port-starboard to 16° average fore-aft. Maximum coverage under the boat is achieved with this medium-frequency transducer, serving anglers who target pelagic species in the upper water column.Airmar’s new Medium Ultra-Wide models are perfect for seeking deeper species with a frequency band from 60-100 kHz. When paired with our other popular models such as the B275LHW, provides the angler with a broad set of frequencies (Low, Medium-Wide, High-Wide) to interrogate targets from deep to shallow.The SS175MW Tilted Element Thru-hull is a 1 kW transducer housed in one of AIRMAR’s most popular Tilted Element housings which includes a ceramic element fixed at a 20°, 12° or 0° angle. Because the transducer is installed almost flush to the hull, the tilted element corrects for the hull deadrise and orients the ceramic element vertically to ensure maximum echo returns to the transducer.****************************************************************** As of 05/29/2024 the bare wire only works with the Garmin GSD28 ******************************************************************Specifications Power Rating 1 kW Max Deadrise Angle 24° Housing Stainless Steel Functions Depth, Temperature Hull Material All hull materials Max Vessel LOA Up to 11 m (36') Hole Size 95 mm (3-3/4") Mounting Style Tilted Element Thru-Hull Acoustic Window Urethane Cable-Length 9 m (30') Max Depth 400 m (1300') Medium Frequency 60-100 kHz Medium Frequency Beamwidth 57° to 73° (Port/Starboard) X 16° average (Fore/Aft) Single or Dual Frequency CHIRP-Ready Single-Band Water Temperature -10° to 40°C (14° to 104°F) Weight 2.7 kg (6 lb.) What's in the Box: SS175C-12-MW-MM Medium CHIRP 12° Tilted Element MMC-0 Bare Wire Mix-N-Match Cable
$2,199.00
-
Airmar Airmar SS175C-0-MW 0d Tilt Medium CHIRP Ultra Wide With Humminbird 9-Pin MMC
Airmar SS175MW Medium Ultra-Wide 0 deg Tilted Element™ Thru-Hull - With MMC-HB Humminbird 9-Pin Mix-N-Match CableModel: SS175C-0-MW-HB Fixed 0° tilted version for 0° to 7° hull deadrise Depth and fast-response water-temperature sensor 1 kW with depth tracking down to 400 m (1,300#39;) Medium frequency: 60-100 kHz 57° to 73° beamwidth (port/starboard) 16° average fore/aft 40 kHz of total bandwidth from one transducer Medium frequency for superior mid-depth performance and excellent fish-target separation Low-profile, thru-hull housing yields good resolution at speed when installed properly Exclusive Xducer ID® technology AIRMAR’s innovative transducer designs have revolutionized the fishing world, and they continue to do so with the NEW Chirp-ready SS175 Medium Ultra-Wide (MW) Tilted Element™ Thru-hull transducer. The SS175MW takes transducer design and performance to a whole new level by using medium frequency (60-100 kHz) with an incredible ultra-wide beamwidth ranging from 57-73° port-starboard to 16° average fore-aft. Maximum coverage under the boat is achieved with this medium-frequency transducer, serving anglers who target pelagic species in the upper water column.Airmar’s new Medium Ultra-Wide models are perfect for seeking deeper species with a frequency band from 60-100 kHz. When paired with our other popular models such as the B275LHW, provides the angler with a broad set of frequencies (Low, Medium-Wide, High-Wide) to interrogate targets from deep to shallow.The SS175MW Tilted Element Thru-hull is a 1 kW transducer housed in one of AIRMAR’s most popular Tilted Element housings which includes a ceramic element fixed at a 20°, 12° or 0° angle. Because the transducer is installed almost flush to the hull, the tilted element corrects for the hull deadrise and orients the ceramic element vertically to ensure maximum echo returns to the transducer.Specifications Power Rating 1 kW Max Deadrise Angle 24° Housing Stainless Steel Functions Depth, Temperature Hull Material All hull materials Max Vessel LOA Up to 11 m (36') Hole Size 95 mm (3-3/4") Mounting Style Tilted Element Thru-Hull Acoustic Window Urethane Cable-Length 9 m (30') Max Depth 400 m (1300') Medium Frequency 60-100 kHz Medium Frequency Beamwidth 57° to 73° (Port/Starboard) X 16° average (Fore/Aft) Single or Dual Frequency CHIRP-Ready Single-Band Water Temperature -10° to 40°C (14° to 104°F) Weight 2.7 kg (6 lb.) What's in the Box: SS175C-0-MW-MM Medium CHIRP 0° Tilted Element MMC-HB Humminbird 9-Pin Mix-N-Match Cable
$2,199.00
-
Airmar Airmar SS175C-0-MW 0d Tilt Medium CHIRP Ultra Wide With Garmin 8-Pin MMC
Airmar SS175MW Medium Ultra-Wide 0 deg Tilted Element™ Thru-Hull - With MMC-8G Garmin 8-Pin Mix-N-Match CableModel: SS175C-0-MW-8G Fixed 0° tilted version for 0° to 7° hull deadrise Depth and fast-response water-temperature sensor 1 kW with depth tracking down to 400 m (1,300#39;) Medium frequency: 60-100 kHz 57° to 73° beamwidth (port/starboard) 16° average fore/aft 40 kHz of total bandwidth from one transducer Medium frequency for superior mid-depth performance and excellent fish-target separation Low-profile, thru-hull housing yields good resolution at speed when installed properly Exclusive Xducer ID® technology AIRMAR’s innovative transducer designs have revolutionized the fishing world, and they continue to do so with the NEW Chirp-ready SS175 Medium Ultra-Wide (MW) Tilted Element™ Thru-hull transducer. The SS175MW takes transducer design and performance to a whole new level by using medium frequency (60-100 kHz) with an incredible ultra-wide beamwidth ranging from 57-73° port-starboard to 16° average fore-aft. Maximum coverage under the boat is achieved with this medium-frequency transducer, serving anglers who target pelagic species in the upper water column.Airmar’s new Medium Ultra-Wide models are perfect for seeking deeper species with a frequency band from 60-100 kHz. When paired with our other popular models such as the B275LHW, provides the angler with a broad set of frequencies (Low, Medium-Wide, High-Wide) to interrogate targets from deep to shallow.The SS175MW Tilted Element Thru-hull is a 1 kW transducer housed in one of AIRMAR’s most popular Tilted Element housings which includes a ceramic element fixed at a 20°, 12° or 0° angle. Because the transducer is installed almost flush to the hull, the tilted element corrects for the hull deadrise and orients the ceramic element vertically to ensure maximum echo returns to the transducer.Specifications Power Rating 1 kW Max Deadrise Angle 24° Housing Stainless Steel Functions Depth, Temperature Hull Material All hull materials Max Vessel LOA Up to 11 m (36') Hole Size 95 mm (3-3/4") Mounting Style Tilted Element Thru-Hull Acoustic Window Urethane Cable-Length 9 m (30') Max Depth 400 m (1300') Medium Frequency 60-100 kHz Medium Frequency Beamwidth 57° to 73° (Port/Starboard) X 16° average (Fore/Aft) Single or Dual Frequency CHIRP-Ready Single-Band Water Temperature -10° to 40°C (14° to 104°F) Weight 2.7 kg (6 lb.) What's in the Box: SS175C-0-MW-MM Medium CHIRP 0° Tilted Element MMC-8G Garmin 8-Pin Mix-N-Match Cable
$2,199.00
-
Airmar Airmar SS175C-0-MW 0d Tilt Medium CHIRP Ultra Wide With Humminbird 21-Pin MMC
Airmar SS175MW Medium Ultra-Wide 0 deg Tilted Element™ Thru-Hull - With MMC-21HB Humminbird 21-Pin Mix-N-Match CableModel: SS175C-0-MW-21HB Fixed 0° tilted version for 0° to 7° hull deadrise Depth and fast-response water-temperature sensor 1 kW with depth tracking down to 400 m (1,300#39;) Medium frequency: 60-100 kHz 57° to 73° beamwidth (port/starboard) 16° average fore/aft 40 kHz of total bandwidth from one transducer Medium frequency for superior mid-depth performance and excellent fish-target separation Low-profile, thru-hull housing yields good resolution at speed when installed properly Exclusive Xducer ID® technology AIRMAR’s innovative transducer designs have revolutionized the fishing world, and they continue to do so with the NEW Chirp-ready SS175 Medium Ultra-Wide (MW) Tilted Element™ Thru-hull transducer. The SS175MW takes transducer design and performance to a whole new level by using medium frequency (60-100 kHz) with an incredible ultra-wide beamwidth ranging from 57-73° port-starboard to 16° average fore-aft. Maximum coverage under the boat is achieved with this medium-frequency transducer, serving anglers who target pelagic species in the upper water column.Airmar’s new Medium Ultra-Wide models are perfect for seeking deeper species with a frequency band from 60-100 kHz. When paired with our other popular models such as the B275LHW, provides the angler with a broad set of frequencies (Low, Medium-Wide, High-Wide) to interrogate targets from deep to shallow.The SS175MW Tilted Element Thru-hull is a 1 kW transducer housed in one of AIRMAR’s most popular Tilted Element housings which includes a ceramic element fixed at a 20°, 12° or 0° angle. Because the transducer is installed almost flush to the hull, the tilted element corrects for the hull deadrise and orients the ceramic element vertically to ensure maximum echo returns to the transducer.Specifications Power Rating 1 kW Max Deadrise Angle 24° Housing Stainless Steel Functions Depth, Temperature Hull Material All hull materials Max Vessel LOA Up to 11 m (36') Hole Size 95 mm (3-3/4") Mounting Style Tilted Element Thru-Hull Acoustic Window Urethane Cable-Length 9 m (30') Max Depth 400 m (1300') Medium Frequency 60-100 kHz Medium Frequency Beamwidth 57° to 73° (Port/Starboard) X 16° average (Fore/Aft) Single or Dual Frequency CHIRP-Ready Single-Band Water Temperature -10° to 40°C (14° to 104°F) Weight 2.7 kg (6 lb.) What's in the Box: SS175C-0-MW-MM Medium CHIRP 0° Tilted Element MMC-21HB Humminbird 21-Pin Mix-N-Match Cable
$2,199.00
-
Airmar Airmar SS175C-0-MW 0d Tilt Medium CHIRP Ultra Wide With Humminbird 14-Pin MMC
Airmar SS175MW Medium Ultra-Wide 0 deg Tilted Element™ Thru-Hull - With MMC-14HBX Humminbird 14-Pin Mix-N-Match CableModel: SS175C-0-MW-14HB Fixed 0° tilted version for 0° to 7° hull deadrise Depth and fast-response water-temperature sensor 1 kW with depth tracking down to 400 m (1,300#39;) Medium frequency: 60-100 kHz 57° to 73° beamwidth (port/starboard) 16° average fore/aft 40 kHz of total bandwidth from one transducer Medium frequency for superior mid-depth performance and excellent fish-target separation Low-profile, thru-hull housing yields good resolution at speed when installed properly Exclusive Xducer ID® technology AIRMAR’s innovative transducer designs have revolutionized the fishing world, and they continue to do so with the NEW Chirp-ready SS175 Medium Ultra-Wide (MW) Tilted Element™ Thru-hull transducer. The SS175MW takes transducer design and performance to a whole new level by using medium frequency (60-100 kHz) with an incredible ultra-wide beamwidth ranging from 57-73° port-starboard to 16° average fore-aft. Maximum coverage under the boat is achieved with this medium-frequency transducer, serving anglers who target pelagic species in the upper water column.Airmar’s new Medium Ultra-Wide models are perfect for seeking deeper species with a frequency band from 60-100 kHz. When paired with our other popular models such as the B275LHW, provides the angler with a broad set of frequencies (Low, Medium-Wide, High-Wide) to interrogate targets from deep to shallow.The SS175MW Tilted Element Thru-hull is a 1 kW transducer housed in one of AIRMAR’s most popular Tilted Element housings which includes a ceramic element fixed at a 20°, 12° or 0° angle. Because the transducer is installed almost flush to the hull, the tilted element corrects for the hull deadrise and orients the ceramic element vertically to ensure maximum echo returns to the transducer.Specifications Power Rating 1 kW Max Deadrise Angle 24° Housing Stainless Steel Functions Depth, Temperature Hull Material All hull materials Max Vessel LOA Up to 11 m (36') Hole Size 95 mm (3-3/4") Mounting Style Tilted Element Thru-Hull Acoustic Window Urethane Cable-Length 9 m (30') Max Depth 400 m (1300') Medium Frequency 60-100 kHz Medium Frequency Beamwidth 57° to 73° (Port/Starboard) X 16° average (Fore/Aft) Single or Dual Frequency CHIRP-Ready Single-Band Water Temperature -10° to 40°C (14° to 104°F) Weight 2.7 kg (6 lb.) What's in the Box: SS175C-0-MW-MM Medium CHIRP 0° Tilted Element MMC-14HBX Humminbird 14-Pin Mix-N-Match Cable
$2,199.00
-
Airmar Airmar SS175C-0-MW 0d Tilt Medium CHIRP Ultra Wide With Garmin 12-Pin MMC
Airmar SS175MW Medium Ultra-Wide 0 deg Tilted Element™ Thru-Hull - With MMC-12G Garmin 12-Pin Mix-N-Match CableModel: SS175C-0-MW-12G Fixed 0° tilted version for 0° to 7° hull deadrise Depth and fast-response water-temperature sensor 1 kW with depth tracking down to 400 m (1,300#39;) Medium frequency: 60-100 kHz 57° to 73° beamwidth (port/starboard) 16° average fore/aft 40 kHz of total bandwidth from one transducer Medium frequency for superior mid-depth performance and excellent fish-target separation Low-profile, thru-hull housing yields good resolution at speed when installed properly Exclusive Xducer ID® technology AIRMAR’s innovative transducer designs have revolutionized the fishing world, and they continue to do so with the NEW Chirp-ready SS175 Medium Ultra-Wide (MW) Tilted Element™ Thru-hull transducer. The SS175MW takes transducer design and performance to a whole new level by using medium frequency (60-100 kHz) with an incredible ultra-wide beamwidth ranging from 57-73° port-starboard to 16° average fore-aft. Maximum coverage under the boat is achieved with this medium-frequency transducer, serving anglers who target pelagic species in the upper water column.Airmar’s new Medium Ultra-Wide models are perfect for seeking deeper species with a frequency band from 60-100 kHz. When paired with our other popular models such as the B275LHW, provides the angler with a broad set of frequencies (Low, Medium-Wide, High-Wide) to interrogate targets from deep to shallow.The SS175MW Tilted Element Thru-hull is a 1 kW transducer housed in one of AIRMAR’s most popular Tilted Element housings which includes a ceramic element fixed at a 20°, 12° or 0° angle. Because the transducer is installed almost flush to the hull, the tilted element corrects for the hull deadrise and orients the ceramic element vertically to ensure maximum echo returns to the transducer.Specifications Power Rating 1 kW Max Deadrise Angle 24° Housing Stainless Steel Functions Depth, Temperature Hull Material All hull materials Max Vessel LOA Up to 11 m (36') Hole Size 95 mm (3-3/4") Mounting Style Tilted Element Thru-Hull Acoustic Window Urethane Cable-Length 9 m (30') Max Depth 400 m (1300') Medium Frequency 60-100 kHz Medium Frequency Beamwidth 57° to 73° (Port/Starboard) X 16° average (Fore/Aft) Single or Dual Frequency CHIRP-Ready Single-Band Water Temperature -10° to 40°C (14° to 104°F) Weight 2.7 kg (6 lb.) What's in the Box: SS175C-0-MW-MM Medium CHIRP 0° Tilted Element MMC-12G Garmin 12-Pin Mix-N-Match Cable
$2,199.00
-
Airmar Airmar SS175C-0-MW 0d Tilt Medium CHIRP Ultra Wide With Furuno 12-Pin MMC
Airmar SS175MW Medium Ultra-Wide 0 deg Tilted Element™ Thru-Hull - With MMC-12F Furuno 12-Pin Mix-N-Match CableModel: SS175C-0-MW-12F Fixed 0° tilted version for 0° to 7° hull deadrise Depth and fast-response water-temperature sensor 1 kW with depth tracking down to 400 m (1,300#39;) Medium frequency: 60-100 kHz 57° to 73° beamwidth (port/starboard) 16° average fore/aft 40 kHz of total bandwidth from one transducer Medium frequency for superior mid-depth performance and excellent fish-target separation Low-profile, thru-hull housing yields good resolution at speed when installed properly Exclusive Xducer ID® technology AIRMAR’s innovative transducer designs have revolutionized the fishing world, and they continue to do so with the NEW Chirp-ready SS175 Medium Ultra-Wide (MW) Tilted Element™ Thru-hull transducer. The SS175MW takes transducer design and performance to a whole new level by using medium frequency (60-100 kHz) with an incredible ultra-wide beamwidth ranging from 57-73° port-starboard to 16° average fore-aft. Maximum coverage under the boat is achieved with this medium-frequency transducer, serving anglers who target pelagic species in the upper water column.Airmar’s new Medium Ultra-Wide models are perfect for seeking deeper species with a frequency band from 60-100 kHz. When paired with our other popular models such as the B275LHW, provides the angler with a broad set of frequencies (Low, Medium-Wide, High-Wide) to interrogate targets from deep to shallow.The SS175MW Tilted Element Thru-hull is a 1 kW transducer housed in one of AIRMAR’s most popular Tilted Element housings which includes a ceramic element fixed at a 20°, 12° or 0° angle. Because the transducer is installed almost flush to the hull, the tilted element corrects for the hull deadrise and orients the ceramic element vertically to ensure maximum echo returns to the transducer.Specifications Power Rating 1 kW Max Deadrise Angle 24° Housing Stainless Steel Functions Depth, Temperature Hull Material All hull materials Max Vessel LOA Up to 11 m (36') Hole Size 95 mm (3-3/4") Mounting Style Tilted Element Thru-Hull Acoustic Window Urethane Cable-Length 9 m (30') Max Depth 400 m (1300') Medium Frequency 60-100 kHz Medium Frequency Beamwidth 57° to 73° (Port/Starboard) X 16° average (Fore/Aft) Single or Dual Frequency CHIRP-Ready Single-Band Water Temperature -10° to 40°C (14° to 104°F) Weight 2.7 kg (6 lb.) What's in the Box: SS175C-0-MW-MM Medium CHIRP 0° Tilted Element MMC-12F Furuno 12-Pin Mix-N-Match Cable
$2,199.00
-
Airmar Airmar SS175C-0-MW 0d Tilt Medium CHIRP Ultra Wide With Raymarine 11-Pin MMC
Airmar SS175MW Medium Ultra-Wide 0 deg Tilted Element™ Thru-Hull - With MMC-11RHM Raymarine 11-Pin Mix-N-Match CableModel: SS175C-0-MW-11R Fixed 0° tilted version for 0° to 7° hull deadrise Depth and fast-response water-temperature sensor 1 kW with depth tracking down to 400 m (1,300#39;) Medium frequency: 60-100 kHz 57° to 73° beamwidth (port/starboard) 16° average fore/aft 40 kHz of total bandwidth from one transducer Medium frequency for superior mid-depth performance and excellent fish-target separation Low-profile, thru-hull housing yields good resolution at speed when installed properly Exclusive Xducer ID® technology AIRMAR’s innovative transducer designs have revolutionized the fishing world, and they continue to do so with the NEW Chirp-ready SS175 Medium Ultra-Wide (MW) Tilted Element™ Thru-hull transducer. The SS175MW takes transducer design and performance to a whole new level by using medium frequency (60-100 kHz) with an incredible ultra-wide beamwidth ranging from 57-73° port-starboard to 16° average fore-aft. Maximum coverage under the boat is achieved with this medium-frequency transducer, serving anglers who target pelagic species in the upper water column.Airmar’s new Medium Ultra-Wide models are perfect for seeking deeper species with a frequency band from 60-100 kHz. When paired with our other popular models such as the B275LHW, provides the angler with a broad set of frequencies (Low, Medium-Wide, High-Wide) to interrogate targets from deep to shallow.The SS175MW Tilted Element Thru-hull is a 1 kW transducer housed in one of AIRMAR’s most popular Tilted Element housings which includes a ceramic element fixed at a 20°, 12° or 0° angle. Because the transducer is installed almost flush to the hull, the tilted element corrects for the hull deadrise and orients the ceramic element vertically to ensure maximum echo returns to the transducer.Specifications Power Rating 1 kW Max Deadrise Angle 24° Housing Stainless Steel Functions Depth, Temperature Hull Material All hull materials Max Vessel LOA Up to 11 m (36') Hole Size 95 mm (3-3/4") Mounting Style Tilted Element Thru-Hull Acoustic Window Urethane Cable-Length 9 m (30') Max Depth 400 m (1300') Medium Frequency 60-100 kHz Medium Frequency Beamwidth 57° to 73° (Port/Starboard) X 16° average (Fore/Aft) Single or Dual Frequency CHIRP-Ready Single-Band Water Temperature -10° to 40°C (14° to 104°F) Weight 2.7 kg (6 lb.) What's in the Box: SS175C-0-MW-MM Medium CHIRP 0° Tilted Element MMC-11RHM Raymarine 11-Pin Mix-N-Match Cable
$2,199.00
-
Airmar Airmar SS175C-0-MW 0d Tilt Medium CHIRP Ultra Wide With Furuno 10-Pin MMC
Airmar SS175MW Medium Ultra-Wide 0 deg Tilted Element™ Thru-Hull - With MMC-10F Furuno 10-Pin Mix-N-Match CableModel: SS175C-0-MW-10F Fixed 0° tilted version for 0° to 7° hull deadrise Depth and fast-response water-temperature sensor 1 kW with depth tracking down to 400 m (1,300#39;) Medium frequency: 60-100 kHz 57° to 73° beamwidth (port/starboard) 16° average fore/aft 40 kHz of total bandwidth from one transducer Medium frequency for superior mid-depth performance and excellent fish-target separation Low-profile, thru-hull housing yields good resolution at speed when installed properly Exclusive Xducer ID® technology AIRMAR’s innovative transducer designs have revolutionized the fishing world, and they continue to do so with the NEW Chirp-ready SS175 Medium Ultra-Wide (MW) Tilted Element™ Thru-hull transducer. The SS175MW takes transducer design and performance to a whole new level by using medium frequency (60-100 kHz) with an incredible ultra-wide beamwidth ranging from 57-73° port-starboard to 16° average fore-aft. Maximum coverage under the boat is achieved with this medium-frequency transducer, serving anglers who target pelagic species in the upper water column.Airmar’s new Medium Ultra-Wide models are perfect for seeking deeper species with a frequency band from 60-100 kHz. When paired with our other popular models such as the B275LHW, provides the angler with a broad set of frequencies (Low, Medium-Wide, High-Wide) to interrogate targets from deep to shallow.The SS175MW Tilted Element Thru-hull is a 1 kW transducer housed in one of AIRMAR’s most popular Tilted Element housings which includes a ceramic element fixed at a 20°, 12° or 0° angle. Because the transducer is installed almost flush to the hull, the tilted element corrects for the hull deadrise and orients the ceramic element vertically to ensure maximum echo returns to the transducer.Specifications Power Rating 1 kW Max Deadrise Angle 24° Housing Stainless Steel Functions Depth, Temperature Hull Material All hull materials Max Vessel LOA Up to 11 m (36') Hole Size 95 mm (3-3/4") Mounting Style Tilted Element Thru-Hull Acoustic Window Urethane Cable-Length 9 m (30') Max Depth 400 m (1300') Medium Frequency 60-100 kHz Medium Frequency Beamwidth 57° to 73° (Port/Starboard) X 16° average (Fore/Aft) Single or Dual Frequency CHIRP-Ready Single-Band Water Temperature -10° to 40°C (14° to 104°F) Weight 2.7 kg (6 lb.) What's in the Box: SS175C-0-MW-MM Medium CHIRP 0° Tilted Element MMC-10F Furuno 10-Pin Mix-N-Match Cable
$2,199.00
-
Airmar Airmar SS175C-0-MW 0d Tilt Medium CHIRP Ultra Wide With Bare Wire MMC
Airmar SS175MW Medium Ultra-Wide 0 deg Tilted Element™ Thru-Hull - With MMC-0 Bare Wire Mix-N-Match CableModel: SS175C-0-MW-0 Fixed 0° tilted version for 0° to 7° hull deadrise Depth and fast-response water-temperature sensor 1 kW with depth tracking down to 400 m (1,300#39;) Medium frequency: 60-100 kHz 57° to 73° beamwidth (port/starboard) 16° average fore/aft 40 kHz of total bandwidth from one transducer Medium frequency for superior mid-depth performance and excellent fish-target separation Low-profile, thru-hull housing yields good resolution at speed when installed properly Exclusive Xducer ID® technology AIRMAR’s innovative transducer designs have revolutionized the fishing world, and they continue to do so with the NEW Chirp-ready SS175 Medium Ultra-Wide (MW) Tilted Element™ Thru-hull transducer. The SS175MW takes transducer design and performance to a whole new level by using medium frequency (60-100 kHz) with an incredible ultra-wide beamwidth ranging from 57-73° port-starboard to 16° average fore-aft. Maximum coverage under the boat is achieved with this medium-frequency transducer, serving anglers who target pelagic species in the upper water column.Airmar’s new Medium Ultra-Wide models are perfect for seeking deeper species with a frequency band from 60-100 kHz. When paired with our other popular models such as the B275LHW, provides the angler with a broad set of frequencies (Low, Medium-Wide, High-Wide) to interrogate targets from deep to shallow.The SS175MW Tilted Element Thru-hull is a 1 kW transducer housed in one of AIRMAR’s most popular Tilted Element housings which includes a ceramic element fixed at a 20°, 12° or 0° angle. Because the transducer is installed almost flush to the hull, the tilted element corrects for the hull deadrise and orients the ceramic element vertically to ensure maximum echo returns to the transducer.****************************************************************** As of 05/29/2024 the bare wire only works with the Garmin GSD28 ******************************************************************Specifications Power Rating 1 kW Max Deadrise Angle 24° Housing Stainless Steel Functions Depth, Temperature Hull Material All hull materials Max Vessel LOA Up to 11 m (36') Hole Size 95 mm (3-3/4") Mounting Style Tilted Element Thru-Hull Acoustic Window Urethane Cable-Length 9 m (30') Max Depth 400 m (1300') Medium Frequency 60-100 kHz Medium Frequency Beamwidth 57° to 73° (Port/Starboard) X 16° average (Fore/Aft) Single or Dual Frequency CHIRP-Ready Single-Band Water Temperature -10° to 40°C (14° to 104°F) Weight 2.7 kg (6 lb.) What's in the Box: SS175C-0-MW-MM Medium CHIRP 0° Tilted Element MMC-0 Bare Wire Mix-N-Match Cable
$2,199.00
-
Airmar Airmar SS175C-20-MW 20d Tilt Medium CHIRP Ultra Wide With Humminbird 9-Pin MMC
Airmar SS175MW Medium Ultra-Wide 20 deg Tilted Element™ Thru-Hull - With MMC-HB Humminbird 9-Pin Mix-N-Match CableModel: SS175C-20-MW-HB Fixed 20° tilted version for 16° to 24° hull deadrise Depth and fast-response water-temperature sensor 1 kW with depth tracking down to 400 m (1,300#39;) Medium frequency: 60-100 kHz 57° to 73° beamwidth (port/starboard) 16° average fore/aft 40 kHz of total bandwidth from one transducer Medium frequency for superior mid-depth performance and excellent fish-target separation Low-profile, thru-hull housing yields good resolution at speed when installed properly Exclusive Xducer ID® technology AIRMAR’s innovative transducer designs have revolutionized the fishing world, and they continue to do so with the NEW Chirp-ready SS175 Medium Ultra-Wide (MW) Tilted Element™ Thru-hull transducer. The SS175MW takes transducer design and performance to a whole new level by using medium frequency (60-100 kHz) with an incredible ultra-wide beamwidth ranging from 57-73° port-starboard to 16° average fore-aft. Maximum coverage under the boat is achieved with this medium-frequency transducer, serving anglers who target pelagic species in the upper water column.Airmar’s new Medium Ultra-Wide models are perfect for seeking deeper species with a frequency band from 60-100 kHz. When paired with our other popular models such as the B275LHW, provides the angler with a broad set of frequencies (Low, Medium-Wide, High-Wide) to interrogate targets from deep to shallow.The SS175MW Tilted Element Thru-hull is a 1 kW transducer housed in one of AIRMAR’s most popular Tilted Element housings which includes a ceramic element fixed at a 20°, 12° or 0° angle. Because the transducer is installed almost flush to the hull, the tilted element corrects for the hull deadrise and orients the ceramic element vertically to ensure maximum echo returns to the transducer.Specifications Power Rating 1 kW Max Deadrise Angle 24° Housing Stainless Steel Functions Depth, Temperature Hull Material All hull materials Max Vessel LOA Up to 11 m (36') Hole Size 95 mm (3-3/4") Mounting Style Tilted Element Thru-Hull Acoustic Window Urethane Cable-Length 9 m (30') Max Depth 400 m (1300') Medium Frequency 60-100 kHz Medium Frequency Beamwidth 57° to 73° (Port/Starboard) X 16° average (Fore/Aft) Single or Dual Frequency CHIRP-Ready Single-Band Water Temperature -10° to 40°C (14° to 104°F) Weight 2.7 kg (6 lb.) What's in the Box: SS175C-20-MW-MM Medium CHIRP 20° Tilted Element MMC-HB Humminbird 9-Pin Mix-N-Match Cable
$2,199.00
-
Airmar Airmar SS175C-20-MW 20d Tilt Medium CHIRP Ultra Wide With Garmin 8-Pin MMC
Airmar SS175MW Medium Ultra-Wide 20 deg Tilted Element™ Thru-Hull - With MMC-8G Garmin 8-Pin Mix-N-Match CableModel: SS175C-20-MW-8G Fixed 20° tilted version for 16° to 24° hull deadrise Depth and fast-response water-temperature sensor 1 kW with depth tracking down to 400 m (1,300#39;) Medium frequency: 60-100 kHz 57° to 73° beamwidth (port/starboard) 16° average fore/aft 40 kHz of total bandwidth from one transducer Medium frequency for superior mid-depth performance and excellent fish-target separation Low-profile, thru-hull housing yields good resolution at speed when installed properly Exclusive Xducer ID® technology AIRMAR’s innovative transducer designs have revolutionized the fishing world, and they continue to do so with the NEW Chirp-ready SS175 Medium Ultra-Wide (MW) Tilted Element™ Thru-hull transducer. The SS175MW takes transducer design and performance to a whole new level by using medium frequency (60-100 kHz) with an incredible ultra-wide beamwidth ranging from 57-73° port-starboard to 16° average fore-aft. Maximum coverage under the boat is achieved with this medium-frequency transducer, serving anglers who target pelagic species in the upper water column.Airmar’s new Medium Ultra-Wide models are perfect for seeking deeper species with a frequency band from 60-100 kHz. When paired with our other popular models such as the B275LHW, provides the angler with a broad set of frequencies (Low, Medium-Wide, High-Wide) to interrogate targets from deep to shallow.The SS175MW Tilted Element Thru-hull is a 1 kW transducer housed in one of AIRMAR’s most popular Tilted Element housings which includes a ceramic element fixed at a 20°, 12° or 0° angle. Because the transducer is installed almost flush to the hull, the tilted element corrects for the hull deadrise and orients the ceramic element vertically to ensure maximum echo returns to the transducer.Specifications Power Rating 1 kW Max Deadrise Angle 24° Housing Stainless Steel Functions Depth, Temperature Hull Material All hull materials Max Vessel LOA Up to 11 m (36') Hole Size 95 mm (3-3/4") Mounting Style Tilted Element Thru-Hull Acoustic Window Urethane Cable-Length 9 m (30') Max Depth 400 m (1300') Medium Frequency 60-100 kHz Medium Frequency Beamwidth 57° to 73° (Port/Starboard) X 16° average (Fore/Aft) Single or Dual Frequency CHIRP-Ready Single-Band Water Temperature -10° to 40°C (14° to 104°F) Weight 2.7 kg (6 lb.) What's in the Box: SS175C-20-MW-MM Medium CHIRP 20° Tilted Element MMC-8G Garmin 8-Pin Mix-N-Match Cable
$2,199.00
-
Airmar Airmar SS175C-20-MW 20d Tilt Medium CHIRP Ultra Wide With Humminbird 21-Pin MMC
Airmar SS175MW Medium Ultra-Wide 20 deg Tilted Element™ Thru-Hull - With MMC-21HB Humminbird 21-Pin Mix-N-Match CableModel: SS175C-20-MW-21HB Fixed 20° tilted version for 16° to 24° hull deadrise Depth and fast-response water-temperature sensor 1 kW with depth tracking down to 400 m (1,300#39;) Medium frequency: 60-100 kHz 57° to 73° beamwidth (port/starboard) 16° average fore/aft 40 kHz of total bandwidth from one transducer Medium frequency for superior mid-depth performance and excellent fish-target separation Low-profile, thru-hull housing yields good resolution at speed when installed properly Exclusive Xducer ID® technology AIRMAR’s innovative transducer designs have revolutionized the fishing world, and they continue to do so with the NEW Chirp-ready SS175 Medium Ultra-Wide (MW) Tilted Element™ Thru-hull transducer. The SS175MW takes transducer design and performance to a whole new level by using medium frequency (60-100 kHz) with an incredible ultra-wide beamwidth ranging from 57-73° port-starboard to 16° average fore-aft. Maximum coverage under the boat is achieved with this medium-frequency transducer, serving anglers who target pelagic species in the upper water column.Airmar’s new Medium Ultra-Wide models are perfect for seeking deeper species with a frequency band from 60-100 kHz. When paired with our other popular models such as the B275LHW, provides the angler with a broad set of frequencies (Low, Medium-Wide, High-Wide) to interrogate targets from deep to shallow.The SS175MW Tilted Element Thru-hull is a 1 kW transducer housed in one of AIRMAR’s most popular Tilted Element housings which includes a ceramic element fixed at a 20°, 12° or 0° angle. Because the transducer is installed almost flush to the hull, the tilted element corrects for the hull deadrise and orients the ceramic element vertically to ensure maximum echo returns to the transducer.Specifications Power Rating 1 kW Max Deadrise Angle 24° Housing Stainless Steel Functions Depth, Temperature Hull Material All hull materials Max Vessel LOA Up to 11 m (36') Hole Size 95 mm (3-3/4") Mounting Style Tilted Element Thru-Hull Acoustic Window Urethane Cable-Length 9 m (30') Max Depth 400 m (1300') Medium Frequency 60-100 kHz Medium Frequency Beamwidth 57° to 73° (Port/Starboard) X 16° average (Fore/Aft) Single or Dual Frequency CHIRP-Ready Single-Band Water Temperature -10° to 40°C (14° to 104°F) Weight 2.7 kg (6 lb.) What's in the Box: SS175C-20-MW-MM Medium CHIRP 20° Tilted Element MMC-21HB Humminbird 21-Pin Mix-N-Match Cable
$2,199.00
-
Airmar Airmar SS175C-20-MW 20d Tilt Medium CHIRP Ultra Wide With Humminbird 14-Pin MMC
Airmar SS175MW Medium Ultra-Wide 20 deg Tilted Element™ Thru-Hull - With MMC-14HB Humminbird 14-Pin Mix-N-Match CableModel: SS175C-20-MW-14HB Fixed 20° tilted version for 16° to 24° hull deadrise Depth and fast-response water-temperature sensor 1 kW with depth tracking down to 400 m (1,300#39;) Medium frequency: 60-100 kHz 57° to 73° beamwidth (port/starboard) 16° average fore/aft 40 kHz of total bandwidth from one transducer Medium frequency for superior mid-depth performance and excellent fish-target separation Low-profile, thru-hull housing yields good resolution at speed when installed properly Exclusive Xducer ID® technology AIRMAR’s innovative transducer designs have revolutionized the fishing world, and they continue to do so with the NEW Chirp-ready SS175 Medium Ultra-Wide (MW) Tilted Element™ Thru-hull transducer. The SS175MW takes transducer design and performance to a whole new level by using medium frequency (60-100 kHz) with an incredible ultra-wide beamwidth ranging from 57-73° port-starboard to 16° average fore-aft. Maximum coverage under the boat is achieved with this medium-frequency transducer, serving anglers who target pelagic species in the upper water column.Airmar’s new Medium Ultra-Wide models are perfect for seeking deeper species with a frequency band from 60-100 kHz. When paired with our other popular models such as the B275LHW, provides the angler with a broad set of frequencies (Low, Medium-Wide, High-Wide) to interrogate targets from deep to shallow.The SS175MW Tilted Element Thru-hull is a 1 kW transducer housed in one of AIRMAR’s most popular Tilted Element housings which includes a ceramic element fixed at a 20°, 12° or 0° angle. Because the transducer is installed almost flush to the hull, the tilted element corrects for the hull deadrise and orients the ceramic element vertically to ensure maximum echo returns to the transducer.Specifications Power Rating 1 kW Max Deadrise Angle 24° Housing Stainless Steel Functions Depth, Temperature Hull Material All hull materials Max Vessel LOA Up to 11 m (36') Hole Size 95 mm (3-3/4") Mounting Style Tilted Element Thru-Hull Acoustic Window Urethane Cable-Length 9 m (30') Max Depth 400 m (1300') Medium Frequency 60-100 kHz Medium Frequency Beamwidth 57° to 73° (Port/Starboard) X 16° average (Fore/Aft) Single or Dual Frequency CHIRP-Ready Single-Band Water Temperature -10° to 40°C (14° to 104°F) Weight 2.7 kg (6 lb.) What's in the Box: SS175C-20-MW-MM Medium CHIRP 20° Tilted Element MMC-14HB Humminbird 14-Pin Mix-N-Match Cable
$2,199.00
-
Airmar Airmar SS175C-20-MW 20d Tilt Medium CHIRP Ultra Wide With Garmin 12-Pin MMC
Airmar SS175MW Medium Ultra-Wide 20 deg Tilted Element™ Thru-Hull - With MMC-12G Garmin 12-Pin Mix-N-Match CableModel: SS175C-20-MW-12G Fixed 20° tilted version for 16° to 24° hull deadrise Depth and fast-response water-temperature sensor 1 kW with depth tracking down to 400 m (1,300#39;) Medium frequency: 60-100 kHz 57° to 73° beamwidth (port/starboard) 16° average fore/aft 40 kHz of total bandwidth from one transducer Medium frequency for superior mid-depth performance and excellent fish-target separation Low-profile, thru-hull housing yields good resolution at speed when installed properly Exclusive Xducer ID® technology AIRMAR’s innovative transducer designs have revolutionized the fishing world, and they continue to do so with the NEW Chirp-ready SS175 Medium Ultra-Wide (MW) Tilted Element™ Thru-hull transducer. The SS175MW takes transducer design and performance to a whole new level by using medium frequency (60-100 kHz) with an incredible ultra-wide beamwidth ranging from 57-73° port-starboard to 16° average fore-aft. Maximum coverage under the boat is achieved with this medium-frequency transducer, serving anglers who target pelagic species in the upper water column.Airmar’s new Medium Ultra-Wide models are perfect for seeking deeper species with a frequency band from 60-100 kHz. When paired with our other popular models such as the B275LHW, provides the angler with a broad set of frequencies (Low, Medium-Wide, High-Wide) to interrogate targets from deep to shallow.The SS175MW Tilted Element Thru-hull is a 1 kW transducer housed in one of AIRMAR’s most popular Tilted Element housings which includes a ceramic element fixed at a 20°, 12° or 0° angle. Because the transducer is installed almost flush to the hull, the tilted element corrects for the hull deadrise and orients the ceramic element vertically to ensure maximum echo returns to the transducer.Specifications Power Rating 1 kW Max Deadrise Angle 24° Housing Stainless Steel Functions Depth, Temperature Hull Material All hull materials Max Vessel LOA Up to 11 m (36') Hole Size 95 mm (3-3/4") Mounting Style Tilted Element Thru-Hull Acoustic Window Urethane Cable-Length 9 m (30') Max Depth 400 m (1300') Medium Frequency 60-100 kHz Medium Frequency Beamwidth 57° to 73° (Port/Starboard) X 16° average (Fore/Aft) Single or Dual Frequency CHIRP-Ready Single-Band Water Temperature -10° to 40°C (14° to 104°F) Weight 2.7 kg (6 lb.) What's in the Box: SS175C-20-MW-MM Medium CHIRP 20° Tilted Element MMC-12G Garmin 12-Pin Mix-N-Match Cable
$2,199.00
-
Airmar Airmar SS175C-20-MW 20d Tilt Medium CHIRP Ultra Wide With Raymarine 11-Pin MMC
Airmar SS175MW Medium Ultra-Wide 20 deg Tilted Element™ Thru-Hull - With MMC-11R Raymarine 11-Pin Mix-N-Match CableModel: SS175C-20-MW-11R Fixed 20° tilted version for 16° to 24° hull deadrise Depth and fast-response water-temperature sensor 1 kW with depth tracking down to 400 m (1,300#39;) Medium frequency: 60-100 kHz 57° to 73° beamwidth (port/starboard) 16° average fore/aft 40 kHz of total bandwidth from one transducer Medium frequency for superior mid-depth performance and excellent fish-target separation Low-profile, thru-hull housing yields good resolution at speed when installed properly Exclusive Xducer ID® technology AIRMAR’s innovative transducer designs have revolutionized the fishing world, and they continue to do so with the NEW Chirp-ready SS175 Medium Ultra-Wide (MW) Tilted Element™ Thru-hull transducer. The SS175MW takes transducer design and performance to a whole new level by using medium frequency (60-100 kHz) with an incredible ultra-wide beamwidth ranging from 57-73° port-starboard to 16° average fore-aft. Maximum coverage under the boat is achieved with this medium-frequency transducer, serving anglers who target pelagic species in the upper water column.Airmar’s new Medium Ultra-Wide models are perfect for seeking deeper species with a frequency band from 60-100 kHz. When paired with our other popular models such as the B275LHW, provides the angler with a broad set of frequencies (Low, Medium-Wide, High-Wide) to interrogate targets from deep to shallow.The SS175MW Tilted Element Thru-hull is a 1 kW transducer housed in one of AIRMAR’s most popular Tilted Element housings which includes a ceramic element fixed at a 20°, 12° or 0° angle. Because the transducer is installed almost flush to the hull, the tilted element corrects for the hull deadrise and orients the ceramic element vertically to ensure maximum echo returns to the transducer.Specifications Power Rating 1 kW Max Deadrise Angle 24° Housing Stainless Steel Functions Depth, Temperature Hull Material All hull materials Max Vessel LOA Up to 11 m (36') Hole Size 95 mm (3-3/4") Mounting Style Tilted Element Thru-Hull Acoustic Window Urethane Cable-Length 9 m (30') Max Depth 400 m (1300') Medium Frequency 60-100 kHz Medium Frequency Beamwidth 57° to 73° (Port/Starboard) X 16° average (Fore/Aft) Single or Dual Frequency CHIRP-Ready Single-Band Water Temperature -10° to 40°C (14° to 104°F) Weight 2.7 kg (6 lb.) What's in the Box: SS175C-20-MW-MM Medium CHIRP 20° Tilted Element MMC-11R Raymarine 11-Pin Mix-N-Match Cable
$2,199.00
-
Airmar Airmar SS175C-20-MW 20d Tilt Medium CHIRP Ultra Wide With Furuno 10-Pin MMC
Airmar SS175MW Medium Ultra-Wide 20 deg Tilted Element™ Thru-Hull - With MMC-10F Furuno 10-Pin Mix-N-Match CableModel: SS175C-20-MW-10F Fixed 20° tilted version for 16° to 24° hull deadrise Depth and fast-response water-temperature sensor 1 kW with depth tracking down to 400 m (1,300#39;) Medium frequency: 60-100 kHz 57° to 73° beamwidth (port/starboard) 16° average fore/aft 40 kHz of total bandwidth from one transducer Medium frequency for superior mid-depth performance and excellent fish-target separation Low-profile, thru-hull housing yields good resolution at speed when installed properly Exclusive Xducer ID® technology AIRMAR’s innovative transducer designs have revolutionized the fishing world, and they continue to do so with the NEW Chirp-ready SS175 Medium Ultra-Wide (MW) Tilted Element™ Thru-hull transducer. The SS175MW takes transducer design and performance to a whole new level by using medium frequency (60-100 kHz) with an incredible ultra-wide beamwidth ranging from 57-73° port-starboard to 16° average fore-aft. Maximum coverage under the boat is achieved with this medium-frequency transducer, serving anglers who target pelagic species in the upper water column.Airmar’s new Medium Ultra-Wide models are perfect for seeking deeper species with a frequency band from 60-100 kHz. When paired with our other popular models such as the B275LHW, provides the angler with a broad set of frequencies (Low, Medium-Wide, High-Wide) to interrogate targets from deep to shallow.The SS175MW Tilted Element Thru-hull is a 1 kW transducer housed in one of AIRMAR’s most popular Tilted Element housings which includes a ceramic element fixed at a 20°, 12° or 0° angle. Because the transducer is installed almost flush to the hull, the tilted element corrects for the hull deadrise and orients the ceramic element vertically to ensure maximum echo returns to the transducer.Specifications Power Rating 1 kW Max Deadrise Angle 24° Housing Stainless Steel Functions Depth, Temperature Hull Material All hull materials Max Vessel LOA Up to 11 m (36') Hole Size 95 mm (3-3/4") Mounting Style Tilted Element Thru-Hull Acoustic Window Urethane Cable-Length 9 m (30') Max Depth 400 m (1300') Medium Frequency 60-100 kHz Medium Frequency Beamwidth 57° to 73° (Port/Starboard) X 16° average (Fore/Aft) Single or Dual Frequency CHIRP-Ready Single-Band Water Temperature -10° to 40°C (14° to 104°F) Weight 2.7 kg (6 lb.) What's in the Box: SS175C-20-MW-MM Medium CHIRP 20° Tilted Element MMC-10F Furuno 10-Pin Mix-N-Match Cable
$2,199.00
-
Airmar Airmar SS175C-20-MW 20d Tilt Medium CHIRP Ultra Wide With Bare Wire MMC
Airmar SS175MW Medium Ultra-Wide 20 deg Tilted Element™ Thru-Hull - With MMC-0 Bare Wire Mix-N-Match CableModel: SS175C-20-MW-0 Fixed 20° tilted version for 16° to 24° hull deadrise Depth and fast-response water-temperature sensor 1 kW with depth tracking down to 400 m (1,300#39;) Medium frequency: 60-100 kHz 57° to 73° beamwidth (port/starboard) 16° average fore/aft 40 kHz of total bandwidth from one transducer Medium frequency for superior mid-depth performance and excellent fish-target separation Low-profile, thru-hull housing yields good resolution at speed when installed properly Exclusive Xducer ID® technology AIRMAR’s innovative transducer designs have revolutionized the fishing world, and they continue to do so with the NEW Chirp-ready SS175 Medium Ultra-Wide (MW) Tilted Element™ Thru-hull transducer. The SS175MW takes transducer design and performance to a whole new level by using medium frequency (60-100 kHz) with an incredible ultra-wide beamwidth ranging from 57-73° port-starboard to 16° average fore-aft. Maximum coverage under the boat is achieved with this medium-frequency transducer, serving anglers who target pelagic species in the upper water column.Airmar’s new Medium Ultra-Wide models are perfect for seeking deeper species with a frequency band from 60-100 kHz. When paired with our other popular models such as the B275LHW, provides the angler with a broad set of frequencies (Low, Medium-Wide, High-Wide) to interrogate targets from deep to shallow.The SS175MW Tilted Element Thru-hull is a 1 kW transducer housed in one of AIRMAR’s most popular Tilted Element housings which includes a ceramic element fixed at a 20°, 12° or 0° angle. Because the transducer is installed almost flush to the hull, the tilted element corrects for the hull deadrise and orients the ceramic element vertically to ensure maximum echo returns to the transducer.****************************************************************** As of 05/29/2024 the bare wire only works with the Garmin GSD28 ******************************************************************Specifications Power Rating 1 kW Max Deadrise Angle 24° Housing Stainless Steel Functions Depth, Temperature Hull Material All hull materials Max Vessel LOA Up to 11 m (36') Hole Size 95 mm (3-3/4") Mounting Style Tilted Element Thru-Hull Acoustic Window Urethane Cable-Length 9 m (30') Max Depth 400 m (1300') Medium Frequency 60-100 kHz Medium Frequency Beamwidth 57° to 73° (Port/Starboard) X 16° average (Fore/Aft) Single or Dual Frequency CHIRP-Ready Single-Band Water Temperature -10° to 40°C (14° to 104°F) Weight 2.7 kg (6 lb.) What's in the Box: SS175C-20-MW-MM Medium CHIRP 20° Tilted Element MMC-0 Bare Wire Mix-N-Match Cable
$2,199.00
-
Airmar Airmar B265C-LM Bronze TH Low Medium CHIRP Navico Blue 7-Pin Y-Cable
Airmar B265C-LM Bronze thru Hull Low Medium CHIRP with Navico Blue 7-Pin Y- Mix-N-Match CableModel: B265C-LM-BL2 Depth and fast-response water-temperature sensing 1 kW of power for great deep to mid-depth performance Low frequency: 42 to 65 kHz - 25° to 16° beamwidth - Maximum depth of 914 m (3000') Medium frequency: 85 to 135 kHz - 16° to 11° beamwidth - Maximum depth of 457 m (1500') 73 kHz of total bandwidth from one transducer Covers popular fishing frequencies of 50, 88, and 107 kHz plus everything else in the bandwidths Bronze housing with High-performance Fairing for optimal high-speed performance Patented Xducer ID® technology Hull Type: Fiberglass or wood Exclusive Xducer ID® technology The B265LM, Chirp-ready thru-hull is a perfect, mid to deep-depth transducer. The huge bandwidth includes many of the most popular frequencies for targeting top gamefish. This 1 kW, powerhouse delivers clear target details, bottom discrimination, as well as bait and game-fish separation at all depths.The low-frequency band, operating between 42 and 65 kHz, provides deep-water performance down to 914 m (3000'). It is a good choice when scouting an area or fishing in deeper depths. The medium-frequency band from 85 to 135 kHz is excellent for identifying targets suspended close to the bottom, on structure, and within the water column.The included, High-performance Fairing improves broadband performance at speeds over 30 knots (34 MPH).Specifications Cable-Length 10 m (33') Single or Dual Frequency CHIRP-Ready Dual-Band Frequency Band Low-Medium Housing Material Bronze Low Frequency 42-65 kHz Low Frequency Beamwidth 25°-16° Medium Frequency 85-135 kHz Medium Frequency Beamwidth 16°-11° Max Deadrise Up to 20° with fairing Max Deadrise Angle 20° Max Depth Low frequency- 914 m (3000'), Medium frequency- 457 m (1500') Mounting Style Thru-Hull with Fairing Power Rating 1 kW Transducer Functions Depth, Temperature Usable Shaft Length 121 mm (4.75") What's in the Box: B265C-LM-MM Transducer High Speed fairing Block High Speed Fairing Block Bolt Kit MMC-BL2 Cable
$2,199.00
-
Airmar Airmar B265C-LM Bronze TH Low Medium CHIRP Navico 9-Pin Y-Cable
Airmar B265C-LM Bronze thru Hull Low Medium CHIRP with Navico 9-Pin mix-N-Match CableModel: B265C-LM-9N2 Depth and fast-response water-temperature sensing 1 kW of power for great deep to mid-depth performance Low frequency: 42 to 65 kHz - 25° to 16° beamwidth - Maximum depth of 914 m (3000') Medium frequency: 85 to 135 kHz - 16° to 11° beamwidth - Maximum depth of 457 m (1500') 73 kHz of total bandwidth from one transducer Covers popular fishing frequencies of 50, 88, and 107 kHz plus everything else in the bandwidths Bronze housing with High-performance Fairing for optimal high-speed performance Patented Xducer ID® technology Hull Type: Fiberglass or wood Exclusive Xducer ID® technology The B265LM, Chirp-ready thru-hull is a perfect, mid to deep-depth transducer. The huge bandwidth includes many of the most popular frequencies for targeting top gamefish. This 1 kW, powerhouse delivers clear target details, bottom discrimination, as well as bait and game-fish separation at all depths.The low-frequency band, operating between 42 and 65 kHz, provides deep-water performance down to 914 m (3000'). It is a good choice when scouting an area or fishing in deeper depths. The medium-frequency band from 85 to 135 kHz is excellent for identifying targets suspended close to the bottom, on structure, and within the water column.The included, High-performance Fairing improves broadband performance at speeds over 30 knots (34 MPH).Specifications Cable-Length 10 m (33') Single or Dual Frequency CHIRP-Ready Dual-Band Frequency Band Low-Medium Housing Material Bronze Low Frequency 42-65 kHz Low Frequency Beamwidth 25°-16° Medium Frequency 85-135 kHz Medium Frequency Beamwidth 16°-11° Max Deadrise Up to 20° with fairing Max Deadrise Angle 20° Max Depth Low frequency- 914 m (3000'), Medium frequency- 457 m (1500') Mounting Style Thru-Hull with Fairing Power Rating 1 kW Transducer Functions Depth, Temperature Usable Shaft Length 121 mm (4.75") What's in the Box: B265C-LM-MM Transducer High Speed fairing Block High Speed Fairing Block Bolt Kit MMC-P2N Cable
$2,199.00
-
Airmar Airmar B265C-LM Bronze TH Low Medium CHIRP Garmin 12-Pin Mix-N-Match
Airmar B265C-LM Bronze thru Hull Low Medium CHIRP with Garmin 12-PinMix-N-Match CableModel: B265C-LM-12G Depth and fast-response water-temperature sensing 1 kW of power for great deep to mid-depth performance Low frequency: 42 to 65 kHz - 25° to 16° beamwidth - Maximum depth of 914 m (3000') Medium frequency: 85 to 135 kHz - 16° to 11° beamwidth - Maximum depth of 457 m (1500') 73 kHz of total bandwidth from one transducer Covers popular fishing frequencies of 50, 88, and 107 kHz plus everything else in the bandwidths Bronze housing with High-performance Fairing for optimal high-speed performance Patented Xducer ID® technology Hull Type: Fiberglass or wood Exclusive Xducer ID® technology The B265LM, Chirp-ready thru-hull is a perfect, mid to deep-depth transducer. The huge bandwidth includes many of the most popular frequencies for targeting top gamefish. This 1 kW, powerhouse delivers clear target details, bottom discrimination, as well as bait and game-fish separation at all depths.The low-frequency band, operating between 42 and 65 kHz, provides deep-water performance down to 914 m (3000'). It is a good choice when scouting an area or fishing in deeper depths. The medium-frequency band from 85 to 135 kHz is excellent for identifying targets suspended close to the bottom, on structure, and within the water column.The included, High-performance Fairing improves broadband performance at speeds over 30 knots (34 MPH).Specifications Cable-Length 10 m (33') Single or Dual Frequency CHIRP-Ready Dual-Band Frequency Band Low-Medium Housing Material Bronze Low Frequency 42-65 kHz Low Frequency Beamwidth 25°-16° Medium Frequency 85-135 kHz Medium Frequency Beamwidth 16°-11° Max Deadrise Up to 20° with fairing Max Deadrise Angle 20° Max Depth Low frequency- 914 m (3000'), Medium frequency- 457 m (1500') Mounting Style Thru-Hull with Fairing Power Rating 1 kW Transducer Functions Depth, Temperature Usable Shaft Length 121 mm (4.75") What's in the Box: B265C-LM-MM Transducer High Speed fairing Block High Speed Fairing Block Bolt Kit MMC-12G Cable
$2,199.00
-
Airmar Airmar B265C-LM Bronze TH Low Medium CHIRP Furuno 12-Pin Mix-N-Match
Airmar B265C-LM Bronze thru Hull Low Medium CHIRP with Furuno 12-Pin Mix-N-Match CableModel: B265C-LM-12F Depth and fast-response water-temperature sensing 1 kW of power for great deep to mid-depth performance Low frequency: 42 to 65 kHz - 25° to 16° beamwidth - Maximum depth of 914 m (3000') Medium frequency: 85 to 135 kHz - 16° to 11° beamwidth - Maximum depth of 457 m (1500') 73 kHz of total bandwidth from one transducer Covers popular fishing frequencies of 50, 88, and 107 kHz plus everything else in the bandwidths Bronze housing with High-performance Fairing for optimal high-speed performance Patented Xducer ID® technology Hull Type: Fiberglass or wood Exclusive Xducer ID® technology The B265LM, Chirp-ready thru-hull is a perfect, mid to deep-depth transducer. The huge bandwidth includes many of the most popular frequencies for targeting top gamefish. This 1 kW, powerhouse delivers clear target details, bottom discrimination, as well as bait and game-fish separation at all depths.The low-frequency band, operating between 42 and 65 kHz, provides deep-water performance down to 914 m (3000'). It is a good choice when scouting an area or fishing in deeper depths. The medium-frequency band from 85 to 135 kHz is excellent for identifying targets suspended close to the bottom, on structure, and within the water column.The included, High-performance Fairing improves broadband performance at speeds over 30 knots (34 MPH).Specifications Cable-Length 10 m (33') Single or Dual Frequency CHIRP-Ready Dual-Band Frequency Band Low-Medium Housing Material Bronze Low Frequency 42-65 kHz Low Frequency Beamwidth 25°-16° Medium Frequency 85-135 kHz Medium Frequency Beamwidth 16°-11° Max Deadrise Up to 20° with fairing Max Deadrise Angle 20° Max Depth Low frequency- 914 m (3000'), Medium frequency- 457 m (1500') Mounting Style Thru-Hull with Fairing Power Rating 1 kW Transducer Functions Depth, Temperature Usable Shaft Length 121 mm (4.75") What's in the Box: B265C-LM-MM Transducer High Speed fairing Block High Speed Fairing Block Bolt Kit MMC-12F Cable
$2,199.00
-
Airmar Airmar B265C-LM Bronze TH Low Medium CHIRP Raymarine 11-Pin Y-Cable
Airmar B265C-LM Bronze thru Hull Low Medium CHIRP with Raymarine 11-Pin Mix-N-Match CableModel: B265C-LM-11R Depth and fast-response water-temperature sensing 1 kW of power for great deep to mid-depth performance Low frequency: 42 to 65 kHz - 25° to 16° beamwidth - Maximum depth of 914 m (3000') Medium frequency: 85 to 135 kHz - 16° to 11° beamwidth - Maximum depth of 457 m (1500') 73 kHz of total bandwidth from one transducer Covers popular fishing frequencies of 50, 88, and 107 kHz plus everything else in the bandwidths Bronze housing with High-performance Fairing for optimal high-speed performance Patented Xducer ID® technology Hull Type: Fiberglass or wood Exclusive Xducer ID® technology The B265LM, Chirp-ready thru-hull is a perfect, mid to deep-depth transducer. The huge bandwidth includes many of the most popular frequencies for targeting top gamefish. This 1 kW, powerhouse delivers clear target details, bottom discrimination, as well as bait and game-fish separation at all depths.The low-frequency band, operating between 42 and 65 kHz, provides deep-water performance down to 914 m (3000'). It is a good choice when scouting an area or fishing in deeper depths. The medium-frequency band from 85 to 135 kHz is excellent for identifying targets suspended close to the bottom, on structure, and within the water column.The included, High-performance Fairing improves broadband performance at speeds over 30 knots (34 MPH).Specifications Cable-Length 10 m (33') Single or Dual Frequency CHIRP-Ready Dual-Band Frequency Band Low-Medium Housing Material Bronze Low Frequency 42-65 kHz Low Frequency Beamwidth 25°-16° Medium Frequency 85-135 kHz Medium Frequency Beamwidth 16°-11° Max Deadrise Up to 20° with fairing Max Deadrise Angle 20° Max Depth Low frequency- 914 m (3000'), Medium frequency- 457 m (1500') Mounting Style Thru-Hull with Fairing Power Rating 1 kW Transducer Functions Depth, Temperature Usable Shaft Length 121 mm (4.75") What's in the Box: B265C-LM-MM Transducer High Speed fairing Block High Speed Fairing Block Bolt Kit MMC-11RLDB Cable
$2,199.00
You have seen 48 out of 702 products