-
Icom Icom M803 SSB
Icom M803 SSB RadioModel: M803 Large Color Display Intuitive User Interface Emergency Distress Button Dedicated DSC Scanning Two Minute Memory Instant Replay Memory NMEA 0183 Version 4.10 data input/output (4800-38400 bps) HF email operation with frequency, mode and bandwidth memorization* Users will like the large 4.3" wide viewing angle color TFT display. Clearly see the high resolution display icons on the LCD screen from numerous positions with the nearly 180 degree wide viewing angle, which provides various installation placement possibilities. The night mode display offers readability in low-light conditions.Smoothly operate and sail with the M803’s large main dial and keys to access functions such as accessing MMSI numbers, vessel numbers, and channels with the full alpha-numeric keypad. Assign one of the software key functions to the microphone’s programmable button for quick access. Additionally the head unit offers programmable keys for customizable access.The M803’s big and easily identifiable emergency distress button is encased in a spring loaded cover. Once pressed a digital distress signal is sent with GPS coordinates and calls for help to other ships or coast stations. The GPS receiver offers GPS, GLONASS, SBAS, position data, speed and UTC data when using the supplied GPS antenna. Position data may be output from the NMEA 0183 port for use with other devices.The dedicated DSC watch-keeping receiver continuously scans the six distress channels in rotation. If you are in process with a DSC call and receive another call, the M803 can switch between calls with the Multiple Task Mode function. 100 MMSI numbers (75 individual/25 group) for DSC calls can be stored with a 10-character name.The Instant Replay Function allows users to replay up to two minutes of previous conversations or calls. The function constantly loops and records over older audio.*Consult with an HF email provider for detailsSpecifications Antenna impedance 50 Ohms (unbalanced) Usable temperature range -20°C to +55°C, -4°F to +131°F Frequency stability Tx/Rx - +/- 10 Hz (below 29.999 MHz) DSC - +/ - 10 Hz Power supply requirement 13.6V DC +/- 15% (Negative ground) Current drain (at 13.6V DC) Receive - Less than 3.0 A (Maximum audio output) Transmit - 30A (Maximum output power) Transmitter Output power 150, 100, 60, 20 W PEP (selectable) Spurious emissions Less than -62 dB (Peak output power) Carrier suppression More than 40 dB (Peak output power) Unwanted sideband suppression More than 55 dB (Peak output powerwith 1500 Hz AF Input) Microphone impedance 600 Ohms Dimensions (Projections not included) Main unit 240 94 238 mm, 9.4 3.7 9.4 in (W H D) Controller 274 114 86 mm, 10.8 4.5 3.4 in (W H D) What's in the Box: Main Unit Remote controller Mounting bracket kits Remote control cable (5 m, 16.4 ft) GPS antenna (5m, 16.4 ft cable) ACC plugs Microphone, HM-214H Microphone hanger Spare fuses
$2,699.95
-
Icom Icom M605 25W VHF AIS Rear Mic Connector
Icom M605 VHF AIS Receiver fixed mount with color display and rear mic connectorModel: M605 41 USA 4.3" wide color TFT LCD Night mode ensures readability in dark places Intuitive user interface NMEA2000™ and NMEA0183 connectivity Class D DSC Active noise cancelling Last call voice recording 30W listen back hailer Built-in horn/foghorn IPX8 submersible (1 m depth of water for 60 minutes) Dual and Tri-watch functions Weather channels with alert function DSC Multi-task function AquaQuake™ draining function Instant-access button for Channel 16 and call channel Supplied speaker microphone, HM-205RB can be connected to the rear panel All functions of the IC-M605 (including DSC and distress operation) can be remotely controlled with up to three controllers, RC-M600 COMMAND HEAD and/or HM-195 series COMMANDMIC™, with an intercom function available among the main radio and controllers. The system allows for maximum operating flexibility anywhere on your boat.A combination of the directional keypad and soft keys provides simple operation. Most used functions are assigned to soft keys (at the bottom of the display) for quick one push function access. The large ten-key pad enables you to smoothly enter channel numbers, MMSI numbers with ID names and so on.The IC-M605’s internal speaker enhances intelligibility of received calls. The waterproof, paper speaker-cone provides superior sound quality with a wide frequency range and a flat frequency response for powerful, yet clear audio.A weak signal adjacent to a strong signal can be clearly received by the IC-M605. Its commercial grade receiver performance (selectivity and IMD: more than 80 dB) provides reliable communication at all times.The GNSS (GPS, GLONASS and SBAS) receiver is integrated in the IC-M605. Position information can be simply received with connection to the supplied GNSS antenna with 5 m cable, UX-241.The Active Noise Canceling digitally removes background noise from both transmit and receive audio and provides clear communication in a noisy maritime environment.When connected to the optional horn speaker, SP-37, you can talk with crews on the deck or shore from the radio’s microphone and can hear any reply via the horn speaker. Also available the RX hailer function and four patterns of automatic foghorn.The last call voice recording function automatically saves up to two minutes of an incoming call. Don’t miss any incoming messages.Using NMEA 2000™ connectivity, the radio can exchange GNSS, AIS reports, DSC call information data, radio frequency and PGN list data on the network. NMEA 0183/-HS GNSS position data can also be converted to NMEA 2000™ data for other equipmentWith an optional voice scrambler unit, UT-112, the IC-M605 provides 32 tone secure conversation. This function is useful when you want to share private information with consort ships.With an integrated AIS receiver, the IC-M605 can show real-time AIS vessel traffic information on the display. The AIS combo screen enables you to monitor the AIS plotter during basic operation. You can directly call a selected AIS target from the AIS screen using an individual DSC call.Specifications General Usable channels USA, CAN, INT, WX channels Operating temperature range —20°C to +60°C; —4°F to +140°F Antenna impedance 50 Ω (SO-239) Transmitter Output power (at 13.8 V DC) 25 W, 1 W Max. frequency deviation +/- 5 kHz Frequency tolerance +/- 5 ppm Spurious emissions Less than —70 dBc (at 25 W) Residual modulation More than 40 dB Adjacent channel power More than 70 dB Receiver Intermediate frequency CH70 30.15 MHz, 450 kHz (1st/2nd) 21.70 MHz, 450 kHz (1st/2nd) Sensitivity (at 12 dB SINAD) CH70 (1% BER) 0.22 µV typical 0.71 µV emf typical Adjacent channel selectivity CH70 (1% BER) More than 80 dB More than 80 dBµ emf Spurious response CH70 (1% BER) More than 77 dB More than 73 dBµ emf Intermodulation CH70 (1% BER) More than 80 dB More than 73 dBµ emf Hum and noise More than 40 dB Audio output power (at 10% distortion) More than 15 W with a 4 Ω external speaker Input Voltage 13.8 V DC (11.7—15.9 V DC) Input Draw Tx 25 W output 6A Rx Max. audio 8A What's in the Box: M605-41 USA Hand microphone (HM-205RB) GNSS antenna (UX-241) PC power cable Mounting bracket kit OPC2384 Adapter Cable
$1,049.95
-
Icom Icom MA510TR Class B AIS
Icom MA-510TR Class B AIS TransponderModel: MA-510TR 13 Collision Alarm Function Anchor Watch Alarm Man Overboard Individual DSC Call available with a compatible Icom VHF with an accessory cable USB connectivity Multi-lingual user interface 12V and 24V compatible The Class B AIS Transponder with GPS navigation function and NMEA 2000™-connectivity and receives both A and B AIS signals. With both A and B AIS signals, the range of detection increases safety. Leisure, fishing or cruising vessels can stay safe and informed on the open sea with this feature-packed transponder.The MA-510TR comes with a 4.3" color TFT LCD. The wide-viewing angle screen provides clear navigation details such as potential collision vessels marked as red, and registered friends marked as yellow. All vessels that are within 6NM CPA and 60 minutes TCPA from a vessel are put into a respective danger or friend list. The day-mode function allows visibility in direct sunlight. Night-mode provides optimal viewing brightness for comfortable operation.The built-in GPS Navigation function guides users to waypoints or AIS targets. Assign up to 100 destinations or fishing spots.Operate securely and privately with the silent mode function. Switch off the AIS transmitter to temporarily stop sending out position location. Other AIS signal reports art still received when silent mode is on. Keep fishing spots privately from other vessels by utilizing silent mode.The MA-510TR can connect to both NMEA 2000™ and NMEA 0183/-HS. Connect to a NMEA 2000™ network such as an external plotter, marine radar and VHF radios. With NMEA 0183/-HS, connect to a transceiver, plotter device, marine radar, external GPS receiver and a switch button.Specifications General Frequency coverage 161.500 MHz to 162.025 MHz Type of emission 16K0GXW (GMSK) Antenna impedence 50 Ohms nominal Operating temperature range -20°C to +60°C; -4°F to +140°F Power supply requirement Negative ground: 12V or 24V DC nominal (9.6V to 31.2V) Current drain (at 12V DC) tx - 1.5ARx - 0.7A Dimensions (approximate) (Projections not included) 6.5 (W) 4.3 (H) 3.6 (D) inches Transmitter Output power 2W Modulation 16K0GXW (GMSK) Conducted spurious emission Less than —36 dBm (9 kHz—1 GHz)Less than —30 dBm (1 GHz—4 GHz) Receiver (AIS) Sensitivity Less than —110 dBm Adjacent channel selectivity More than —31 dBm Spurious response More than —31 dBm Intermodulation More than —36 dBm Conducted spurious emissions Less than —57 dBm (9 kHz—1 GHz) Less than —47 dBm (1 GHz—4 GHz) Blocking More than —15 dBm (±0.5 MHz ±5 MHZ) More than —23 dBm (±5 MHz — ±10 MHz) Co-channel More than -111 dBM Receiver (DSC) Frequency coverage 156.525 MHz Type of emission 16K0G2B Sensitivity Less than —110 dBm Adjacent channel selectivity More than 70 dBm Spurious response More than -34 dBm Intermodulation More than -39 dBm Blocking More than -20 dBm GPS Antenna Received frequency 1575.42 MHz Acquisition 72 ch (maximum) Differential satellites WAAS, EGNOS, MSAS, GAGAN Dimensions (approximate) 96.2 225 (H) mm, 3.8 8.9 (H) inches Cable length (approximate) 32.8 ft Data Interface USB (Type-B Mini) GGA, GNS, GLL, GSA, GSV, RMC, VTG, VDM, VDO, ACA, ACS, ALR, TXT NMEA 2000™ Input 059392/904, 060160/416/928, 065240, 126208/996, 129026/029/545 NMEA output 059392/904, 060416/928, 126208/464/993/996/998, 129026/029/038/039/040/041/539/540/545/792/793/794/797/798/801/802/803/805/806/807/809/810/811 NMEA 0183 NMEA Input/Outpu 4800—38400 bps Input/Output, sentence format (Output: GGA, GNS, GLL, GSA*1, GSV*1, RMC, VTG, GBS, DTM, DSC) External GPS Input 4800—38400 bps Input, sentence format (GGA, GNS, GLL, RMC, VTG, GBS*2, DTM) AIS Output 38400 bps Output, sentence format (VDM, VDO, ACA, ACS, ALR, TXT) *1 Only 38400 bps. *2 When a received GPS signal does not include a GBS sentence, the transponder will not receive the signal from the external GPS receiver What's in the Box: MA510TR GPS antenna DC power cable Mounting bracket kit Accessory connector
$999.95
-
Icom Icom M510 Plus EVO AIS VHF With NMEA2000
ICOM M510 Plus EVO Class-D DSC VHF Marine Radio with AIS and NMEA 2000™ and WLAN FunctionModel: M510 PLUS EVO 51 USA Integrated GNSS receiver (selectable from either internal GPS antenna or use optional UX-241 GNSS antenna) IP68 advanced waterproofing (1 m depth of water for 60 minutes) Voice Scrambler with optional UT-112A AquaQuake™ prevents audio degradation from a water-logged speaker Supplied HM-205RB speaker-microphone can be connected to either the front or rear panel to meet to user's requirement External speaker connection Optional HM-195 CommandMic™ are available Supports 4-digit channels Supplied waterproof flash mount gasket for panel mount The IC-M510 EVO is a multifunctional and stylish VHF marine transceiver that also features innovative smartphone operation technology. Its built-in class D DSC provides essential maritime communication, supporting safety on the water. Integration with built-in NMEA 2000™ connectivity and two-way hailer/RX hailer functions enhances your experience at sea even more. Simple remote control through a smart device enables an unprecedented onboard communication experience. In addition, the product features a color display, navigation functions, and a stylish design that won an iF design award. It can be used for pleasure boats, fishing boats, sailing, as well as in rescue and public safety.The NMEA 2000™ network provides plug-and-play data communication to inter-connect with other marine equipment such as an MFD (Multi-Function Display.) The radio can send GNSS (GPS) position, AIS information*, DSC call, and radio channel data to other equipment.When connected to the optional SP-37 speaker horn, you can talk with the crew on the deck or shore via the radio's microphone and hear any reply via the horn speaker. The RX hailer function lets you to listen the radio traffic on the deck or tower through the hailer speaker. You can also sound foghorn patterns from the hailer speaker.Use the RS-M500 app (for iOS/Android) to wirelessly control the IC-M510 EVO through the radio’s WLAN feature. You can use up to three smart devices as a wireless microphone, intercom between a device and the M510, and a simple remote control for specific functions.The IC-M510 series (including IC-M510 EVO) is a winner in the world-renowned iF DESIGN AWARD 2022. The radio can be installed in either panel or trunnion mounting and has a sleek design that looks great on a boat's black glass cockpit dashboard.The color TFT LCD provides nearly a 180-degree viewing angle. The wide-viewing angle display has high-resolution characters and function icons. Hold down the DISP key to switch the Night mode screen, ensuring good readability in low light conditions.With just a press of the "DISTRESS" button, the built-in DSC (Digital Selective Calling) system can digitally transmit distress information to the Coast Guard and/or other vessels. The DSC watch function continuously monitors the DSC channel (Ch. 70) for added safety and security.The built-in waterproof speaker enhances the received audio and provides powerful, clear audio.With its integrated AIS receiver*1 or external NMEA sentence*2, the IC-M510 can show real-time AIS vessel traffic information on the display. You can directly make an individual DSC call to selected AIS targets from the AIS screen.Specifications General Usable channels USA, CAN, INT, WX channels Type of emission 16K0G3E (FM), 16K0G2B (DSC), 16K0GXW (AIS)*1 Power supply requirement 13.8 V DC (11.7 ~ 15.9 V DC) Current drain TX 25 W output 5.0 A RX Max. audio 1.6 A 2.0 A (with HM-195) 4.0 A (with extSP) 7.3 A (with ext SP, RX hailer, and HM-195) Antenna impedance 50 Ohm Dimensions (W x X x D) 175 x 110 x 53 mm, 6.8 x 4.3 x 2.1 in Weight (approx.) 730 g, 1.6 lb (not including microphone) Transmitter Output power (at 13.8 V DC) 25 W, 1W Max. frequency deviation ±5 kHz Frequency tolerance ±0.5 kHz Spurious emissions Less than ?70 dBc (at 25 W) Residual modulation More than 40 dB Adjacent channel power More than 70 dB Receiver Audio output power (at 10% distortion with 4 ?) More than 15 W (external speaker) 20 W typical (RX Hailer) 25 W typical (Hailer) Wireless LAN Wireless LAN standard IEEE802.11 b/g/n Authentication and Encryption WEP (64/128 bit), WPA-PSK (TKIP), WPA2-PSK (AES) Channels 1 to 13 (2.4 GHz band)*2 Output power Less than 10 mW/MHz What's in the Box: M510 PLUS EVO 51 USA Speaker microphone, HM-205RB Microphone hanger DC power cable Mounting bracket kit Flash mount gasket
$949.95
-
Icom Icom M605 25W VHF Rear Mic Connector
Icom M605 VHF fixed mount with color display and rear mic connectorModel: M605 31 USA 4.3" wide color TFT LCD Night mode ensures readability in dark places Intuitive user interface NMEA2000™ and NMEA0183 connectivity Class D DSC Active noise cancelling Last call voice recording 30W listen back hailer Built-in horn/foghorn IPX8 submersible (1 m depth of water for 60 minutes) Dual and Tri-watch functions Weather channels with alert function DSC Multi-task function AquaQuake™ draining function Instant-access button for Channel 16 and call channel Supplied speaker microphone, HM-205RB can be connected to the rear panel All functions of the IC-M605 (including DSC and distress operation) can be remotely controlled with up to three controllers, RC-M600 COMMAND HEAD and/or HM-195 series COMMANDMIC™, with an intercom function available among the main radio and controllers. The system allows for maximum operating flexibility anywhere on your boat.A combination of the directional keypad and soft keys provides simple operation. Most used functions are assigned to soft keys (at the bottom of the display) for quick one push function access. The large ten-key pad enables you to smoothly enter channel numbers, MMSI numbers with ID names and so on.The IC-M605’s internal speaker enhances intelligibility of received calls. The waterproof, paper speaker-cone provides superior sound quality with a wide frequency range and a flat frequency response for powerful, yet clear audio.A weak signal adjacent to a strong signal can be clearly received by the IC-M605. Its commercial grade receiver performance (selectivity and IMD: more than 80 dB) provides reliable communication at all times.The GNSS (GPS, GLONASS and SBAS) receiver is integrated in the IC-M605. Position information can be simply received with connection to the supplied GNSS antenna with 5 m cable, UX-241.The Active Noise Canceling digitally removes background noise from both transmit and receive audio and provides clear communication in a noisy maritime environment.When connected to the optional horn speaker, SP-37, you can talk with crews on the deck or shore from the radio’s microphone and can hear any reply via the horn speaker. Also available the RX hailer function and four patterns of automatic foghorn.The last call voice recording function automatically saves up to two minutes of an incoming call. Don’t miss any incoming messages.Using NMEA 2000™ connectivity, the radio can exchange GNSS, AIS reports, DSC call information data, radio frequency and PGN list data on the network. NMEA 0183/-HS GNSS position data can also be converted to NMEA 2000™ data for other equipmentWith an optional voice scrambler unit, UT-112, the IC-M605 provides 32 tone secure conversation. This function is useful when you want to share private information with consort ships.Specifications General Usable channels USA, CAN, INT, WX channels Operating temperature range —20°C to +60°C; —4°F to +140°F Antenna impedance 50 Ω (SO-239) Transmitter Output power (at 13.8 V DC) 25 W, 1 W Max. frequency deviation +/- 5 kHz Frequency tolerance +/- 5 ppm Spurious emissions Less than —70 dBc (at 25 W) Residual modulation More than 40 dB Adjacent channel power More than 70 dB Receiver Intermediate frequency CH70 30.15 MHz, 450 kHz (1st/2nd) 21.70 MHz, 450 kHz (1st/2nd) Sensitivity (at 12 dB SINAD) CH70 (1% BER) 0.22 µV typical 0.71 µV emf typical Adjacent channel selectivity CH70 (1% BER) More than 80 dB More than 80 dBµ emf Spurious response CH70 (1% BER) More than 77 dB More than 73 dBµ emf Intermodulation CH70 (1% BER) More than 80 dB More than 73 dBµ emf Hum and noise More than 40 dB Audio output power (at 10% distortion) More than 15 W with a 4 Ω external speaker Input Voltage 13.8 V DC (11.7—15.9 V DC) Input Draw Tx 25 W output 6A Rx Max. audio 8A What's in the Box: M605 Hand microphone (HM-205RB) GNSS antenna (UX-241) PC power cable Mounting bracket kit OPC2384 Adapter Cable
$849.95
-
Icom Icom M510 EVO VHF With NMEA2000
ICOM M510 EVO Class-D DSC VHF Marine Radio with NMEA 2000™ and WLAN FunctionModel: M510 EVO 41 USA Integrated GNSS receiver (selectable from either internal GPS antenna or use optional UX-241 GNSS antenna) IP68 advanced waterproofing (1 m depth of water for 60 minutes) Voice Scrambler with optional UT-112A AquaQuake™ prevents audio degradation from a water-logged speaker Supplied HM-205RB speaker-microphone can be connected to either the front or rear panel to meet to user's requirement External speaker connection Optional HM-195 CommandMic™ are available Supports 4-digit channels Supplied waterproof flash mount gasket for panel mount The IC-M510 EVO is a multifunctional and stylish VHF marine transceiver that also features innovative smartphone operation technology. Its built-in class D DSC provides essential maritime communication, supporting safety on the water. Integration with built-in NMEA 2000™ connectivity and two-way hailer/RX hailer functions enhances your experience at sea even more. Simple remote control through a smart device enables an unprecedented onboard communication experience. In addition, the product features a color display, navigation functions, and a stylish design that won an iF design award. It can be used for pleasure boats, fishing boats, sailing, as well as in rescue and public safety.The NMEA 2000™ network provides plug-and-play data communication to inter-connect with other marine equipment such as an MFD (Multi-Function Display.) The radio can send GNSS (GPS) position, DSC call, and radio channel data to other equipment.When connected to the optional SP-37 speaker horn, you can talk with the crew on the deck or shore via the radio's microphone and hear any reply via the horn speaker. The RX hailer function lets you to listen the radio traffic on the deck or tower through the hailer speaker. You can also sound foghorn patterns from the hailer speaker.Use the RS-M500 app (for iOS/Android) to wirelessly control the IC-M510 EVO through the radio’s WLAN feature. You can use up to three smart devices as a wireless microphone, intercom between a device and the M510, and a simple remote control for specific functions.The IC-M510 series (including IC-M510 EVO) is a winner in the world-renowned iF DESIGN AWARD 2022. The radio can be installed in either panel or trunnion mounting and has a sleek design that looks great on a boat's black glass cockpit dashboard.The color TFT LCD provides nearly a 180-degree viewing angle. The wide-viewing angle display has high-resolution characters and function icons. Hold down the DISP key to switch the Night mode screen, ensuring good readability in low light conditions.With just a press of the "DISTRESS" button, the built-in DSC (Digital Selective Calling) system can digitally transmit distress information to the Coast Guard and/or other vessels. The DSC watch function continuously monitors the DSC channel (Ch. 70) for added safety and security.The built-in waterproof speaker enhances the received audio and provides powerful, clear audio.Specifications General Usable channels USA, CAN, INT, WX channels Type of emission 16K0G3E (FM), 16K0G2B (DSC), 16K0GXW (AIS)*1 Power supply requirement 13.8 V DC (11.7 ~ 15.9 V DC) Current drain TX 25 W output 5.0 A RX Max. audio 1.6 A 2.0 A (with HM-195) 4.0 A (with extSP) 7.3 A (with ext SP, RX hailer, and HM-195) Antenna impedance 50 Ohm Dimensions (W x X x D) 175 x 110 x 53 mm, 6.8 x 4.3 x 2.1 in Weight (approx.) 730 g, 1.6 lb (not including microphone) Transmitter Output power (at 13.8 V DC) 25 W, 1W Max. frequency deviation ±5 kHz Frequency tolerance ±0.5 kHz Spurious emissions Less than 70 dBc (at 25 W) Residual modulation More than 40 dB Adjacent channel power More than 70 dB Receiver Audio output power (at 10% distortion with 4 Ohm) More than 15 W (external speaker) 20 W typical (RX Hailer) 25 W typical (Hailer) Wireless LAN Wireless LAN standard IEEE802.11 b/g/n Authentication and Encryption WEP (64/128 bit), WPA-PSK (TKIP), WPA2-PSK (AES) Channels 1 to 13 (2.4 GHz band)*2 Output power Less than 10 mW/MHz What's in the Box: M510 EVO 41 USA Speaker microphone, HM-205RB Microphone hanger DC power cable Mounting bracket kit Flash mount gasket
$799.95
-
Icom Icom M510BB Black Box VHF With HM195GW White
icom M510BB Black Box VHF with HM195GW White CommandMicModel: M510 BB GW 21 USAIcom’s M510BB is perfect for boats that need AIS receive functionality without taking up precious helm space. The supplied CommandMic™ provides all the safety and communication functions for commercial and leisure boaters.The M510BB consists of a CommandMic™ and black box RF unit. Use the CommandMic™ for all operations including DSC. Install the RF unit out of sight, place up to 60 ft (18.3 m)* away from the CommandMic™.Add up to two additional CommandMic™ microphones for boats requiring two or three comms stations. Extend communication points around the boat including the cockpit, fly bridge, and tower. Access the intercom functions for one-to-all or one-to-one communications on the boat.The M510BB includes an integrated AIS receiver, perfect for remote station information via the CommandMic™, or integrated into the NMEA 2000® bus to display radar and chart plotter information on an MFD (Multi-Function Display).In addition to the conveniently located DSC button on the back of every CommandMic™, the M510BB introduces a dedicated DSC Remote Control (EN 300 338-8 compatible) terminal, allowing a connection to an external device to centralize emergency communications control.The M510BB has a last call voice recording function automatically saves up to two minutes of an incoming call.The NMEA 2000® network provides plug-and-play data communication to inter-connect other marine equipment such as an MFD (Multi-Function Display). The radio can send AIS, GNSS (GPS) position, DSC call, and radio channels to other equipment.On the back of every CommandMic™ is a conveniently located DSC button. Once triggered, the M510BB transmits a DSC alert signal to nearby vessels with the MMSI* and GPS location of your vessel. *MMSI number must be obtained and programmed for each vessel/radio.The built-in 15W amplifier increases the audio output of an external hailer speaker. The one-way RX hailer function enables you to broadcast radio traffic through the hailer speaker to listen to radio traffic on the deck or tower. You can also sound foghorn patterns from the hailer speaker.The Active Noise Cancelling function digitally removes background noise from transmitting and receiving audio to provide clear communications in noisy maritime environments.Specifications General Usable channels USA, INT, CAN, WX channels Power supply requirement 13.8 V DC nominal (11.7 ~ 15.9 V DC) (Negative ground) Current drain (at 13.8 V DC) TX Max. power - 5.5 A Max.RX Max. audio - 1.5 A (One CommandMic™) 4.5 A (Three CommandMic™ and RX hailer) Operating temperature range —20°C ~ 60°C, —4°F ~ 140°F Antenna impedance 50 ohm nominal Weight (approx.) RF unit - 890 g; 2 lbCommandMic™ - 400 g; 14.1 oz Transmitter Output power (at 13.8V DC) 25 W, 1 W (High, Low) Max. frequency deviation ±5 kHz Frequency tolerance ±0.5 kHz Spurious emissions Less than —70 dBc (High power), Less than —56 dBc (Low power) Residual modulation More than 40 dB Adjacent channel power More than 70 dB Receiver Sensitivity FM (at 12dB SINAD) 0.22 µV typical Sensitivity DSC (at 1% BER) —7 dBµemf typical Adjacent channel selectivity FM More than 70 dB Adjacent channel selectivity DSC (1% BER) More than 73 dBµ emf Spurious response FM More than 70 dB Spurious response DSC (1% BER) More than 73 dBµ emf Intermodulation FM More than 75 dB Intermodulation DSC (1% BER) More than 68 dBµ emf Hum and noise More than 40 dB What's in the Box: IC-M510BB DC power cable (2 m) Microphone Hanger Connection cable, OPC-1540 (6.1 m, 20 ft) CommandMic™, HM-195GW Connector cap Mounting base
$799.95
-
Icom Icom M510BB Black Box VHF With HM195GB Black
icom M510BB Black Box VHF with HM195GB Black CommandMicModel: M510 BB 21 USAIcom’s M510BB is perfect for boats that need AIS receive functionality without taking up precious helm space. The supplied CommandMic™ provides all the safety and communication functions for commercial and leisure boaters.The M510BB consists of a CommandMic™ and black box RF unit. Use the CommandMic™ for all operations including DSC. Install the RF unit out of sight, place up to 60 ft (18.3 m)* away from the CommandMic™.Add up to two additional CommandMic™ microphones for boats requiring two or three comms stations. Extend communication points around the boat including the cockpit, fly bridge, and tower. Access the intercom functions for one-to-all or one-to-one communications on the boat.The M510BB includes an integrated AIS receiver, perfect for remote station information via the CommandMic™, or integrated into the NMEA 2000® bus to display radar and chart plotter information on an MFD (Multi-Function Display).In addition to the conveniently located DSC button on the back of every CommandMic™, the M510BB introduces a dedicated DSC Remote Control (EN 300 338-8 compatible) terminal, allowing a connection to an external device to centralize emergency communications control.The M510BB has a last call voice recording function automatically saves up to two minutes of an incoming call.The NMEA 2000® network provides plug-and-play data communication to inter-connect other marine equipment such as an MFD (Multi-Function Display). The radio can send AIS, GNSS (GPS) position, DSC call, and radio channels to other equipment.On the back of every CommandMic™ is a conveniently located DSC button. Once triggered, the M510BB transmits a DSC alert signal to nearby vessels with the MMSI* and GPS location of your vessel. *MMSI number must be obtained and programmed for each vessel/radio.The built-in 15W amplifier increases the audio output of an external hailer speaker. The one-way RX hailer function enables you to broadcast radio traffic through the hailer speaker to listen to radio traffic on the deck or tower. You can also sound foghorn patterns from the hailer speaker.The Active Noise Cancelling function digitally removes background noise from transmitting and receiving audio to provide clear communications in noisy maritime environments.Specifications General Usable channels USA, INT, CAN, WX channels Power supply requirement 13.8 V DC nominal (11.7 ~ 15.9 V DC) (Negative ground) Current drain (at 13.8 V DC) TX Max. power - 5.5 A Max.RX Max. audio - 1.5 A (One CommandMic™) 4.5 A (Three CommandMic™ and RX hailer) Operating temperature range —20°C ~ 60°C, —4°F ~ 140°F Antenna impedance 50 ohm nominal Weight (approx.) RF unit - 890 g; 2 lbCommandMic™ - 400 g; 14.1 oz Transmitter Output power (at 13.8V DC) 25 W, 1 W (High, Low) Max. frequency deviation ±5 kHz Frequency tolerance ±0.5 kHz Spurious emissions Less than —70 dBc (High power), Less than —56 dBc (Low power) Residual modulation More than 40 dB Adjacent channel power More than 70 dB Receiver Sensitivity FM (at 12dB SINAD) 0.22 µV typical Sensitivity DSC (at 1% BER) —7 dBµ emf typical Adjacent channel selectivity FM More than 70 dB Adjacent channel selectivity DSC (1% BER) More than 73 dBµ emf Spurious response FM More than 70 dB Spurious response DSC (1% BER) More than 73 dBµ emf Intermodulation FM More than 75 dB Intermodulation DSC (1% BER) More than 68 dBµ emf Hum and noise More than 40 dB What's in the Box: IC-M510BB DC power cable (2 m) Microphone Hanger Connection cable, OPC-1540 (6.1 m, 20 ft) CommandMic™, HM-195GB Connector cap Mounting base
$799.95
-
Icom Icom M510 Plus AIS VHF
Icom M510 PLUS AIS VHF RadioModel: M510 PLUS 21 USA Active Noise Canceling NMEA 0183/HS connectivity Integrated GNSS receiver (Selectable from either internal receiver or use UX-241 GNSS antenna) IP68 advanced waterproofing (1 m depth of water for 60 minutes) Automatic Foghorn function (CT-M500 required) Voice Scrambler with optional UT-112A AquaQuake™ prevents audio degradation from a water-logged speaker Supplied speaker-microphone, HM-205RB can be connected to the rear panel External speaker connection Controlled with COMMANDMIC™ HM-195GB/GW Supports 4-digit channels Icom’s new Class D DSC fixed mount VHF marine transceiver, the M510 is a tech-laden powerhouse. The M510 is nearly half the depth of the M506, allowing installation in more confined spaces. The large color display has a simple user interface allowing casual and serious boaters alike with plenty of options to communicate. Additionally, command and control using iOS® and Android™ smart devices with class leading features such as wireless calling.The M510 includes a full color 3.5" TFT LCD screen with a near 180-degree viewing angles. The standard marine user interface is enhanced with animated functions and night mode for optimal viewing in the dark.The RS-M500 app allows you to connect three iOS® or Android™ smart devices to function as a wireless command speaker/microphone. Use the push-to-talk features, scroll/scan channels, as well as use the M510’s intercom function from the comfort of the captain’s seat. Additionally, one COMMANDMIC™ can connect while 3 other smart devices are linked.Connect to NMEA 2000 with the optional CT-M500 wireless interface box. If the NMEA connection is on a different part of the boat, the CT-M500 can wirelessly connect with the M510, providing flexibility on placement. Additionally, with the optional SP-37 horn speaker, the CT-M500 can access the two-way hailer/PA functions.With its integrated AIS receiver or external NMEA sentence (third party AIS receiver, transponder), the IC-M510 can show real-time AIS vessel traffic information on the display. You can directly make an individual DSC call to selected AIS targets from the AIS screen.Specifications General Usable channels USA, INT, CAN, WX channels Type of emission 16K0G3E (FM), 16K0G2B (DSC), 16K0GXW (AIS)* Power supply requirement 13.8V DC (11.7—15.9V DC) Current drain TX (25W output) 5.0A Current drain RX (Max. Audio) 3.3A Operating temperature range —20°C to +60°C; —4°F to +140°F Antenna impedance 50 Ohm Transmitter Output power (at 13.8V DC) 25W, 1W Max. frequency deviation +/- 5.0 kHz Frequency tolerance +/- 0.5 kHz Spurious emissions Less than -70 dBc (at 25W) Residual modulation More than 40 dB More than 40 dB More than 70 dB Receiver Sensitivity (at 12dB SINAD) DSC (1% BER) 0.32 µV typical 0.89 µV emf typical Adjacent channel selectivity DSC (1% BER) More than 75 dB More than 73 dBµ emf Spurious response DSC (1% BER) More than 75 dB More than 73 dBµ emf Intermodulation DSC (1% BER) More than 75 dB More than 68 dBµ emf Hum and noise More than 40 dB Audio output power at 10% distortion More than 15W with a 4Ω external speaker Wireless LAN Wireless LAN standard IEEE 802.11 b/g/n Authentication and Encryption WEP (64/128 bit), WPA-PSK (TKIP), WPA2-PSK (AES) Channels 1 to 13 (2.4 GHz band)** Output power Less than 10 mW/MHz What's in the Box: M510 PLUS AIS VHF Speaker microphone, HM-205RB Microphone hanger DC Power Cable Mounting Bracket Kit
$799.95
-
Icom ICOM M510BB 21 BLACK BOX VHF W/BLACK COMMAND MIC & 3 COMMAND MIC PORTS
M510BB 21 Black Box VHF with Black Command Mic & 3 Command Mic Ports Icom’s M510BB is perfect for boats that need AIS to receive functionality without taking up precious helm space. The supplied black CommandMic™ provides all the safety and communication functions for commercial and leisure boaters. Clean Installation for Limited Helm Space The M510BB consists of a CommandMic™ and a black box RF unit. Use the CommandMic™ for all operations, including DSC. Install the RF unit out-of-sight, placing it up to 60 ft (18.3 m)* away from the CommandMic™. *Two OPC-1541 cables are required for the 60 ft installation CommandMic™ Stations Add up to two additional CommandMic™ microphones for boats requiring two or three comms stations. Extend communication points around the boat including the cockpit, flybridge, and tower. Access the intercom functions for one-to-all or one-to-one communications on the boat. AIS Receive The M510BB includes an integrated AIS receiver, perfect for remote station information via the CommandMic™, or integrated into the NMEA 2000® bus to display radar and chart plotter information on an MFD (Multi-Function Display). DSC Functionality and Remote Control In addition to the conveniently located DSC button on the back of every CommandMic™, the M510BB introduces a dedicated DSC Remote Control (EN 300 338-8 compatible) terminal, allowing a connection to an external device to centralize emergency communications control. NMEA200® and NMEA 0183-HS® The NMEA 2000® network provides plug-and-play data communication to interconnect other marine equipment, such as an MFD (Multi-Function Display). The radio can send AIS, GNSS (GPS) position, DSC call, and radio channels to other equipment. Class D DSC Functionality On the back of every CommandMic™ is a conveniently located DSC button. Once triggered, the M510BB transmits a DSC alert signal to nearby vessels with the MMSI* and GPS location of your vessel. *MMSI number must be obtained and programmed for each vessel/radio. Loud One-Way RX Hailer The built-in 15W amplifier increases the audio output of an external hailer speaker. The one-way RX hailer function enables you to broadcast radio traffic through the hailer speaker to listen to radio traffic on the deck or tower. You can also hear foghorn patterns from the hailer speaker. Active Noise Cancelling The Active Noise cancellation function digitally removes background noise from transmitting and receiving audio to provide clear communications in noisy maritime environments. Features: AquaQuake™ function Anchor watch function Specifications: Command Mic Color: Black Remote Stations: Up to 3 Output Power: 25W GPS: Internal GPS GNSS Receiver, with external GPS antenna connection NMEA: NMEA 2000®/ NMEA 0183® -HS Waterproof Rating: IPX7 Frequency Range: Tx - 156.025 157.425 MHz / Rx - 156.050 163.275 MHz / DSC - 156.525 MHz Usable Channels: USA, INT, CAN, WX channels Type of Emission: 16K0G3E (FM), 16K0G2B (DSC), 16K0GXW (AIS)* Power Supply Requirement: 13.8 V DC nominal (11.7 15.9 V DC) (Negative ground) Current Drain (at 13.8 V DC): TX Max. power - 5.5 A Max. / RX Max. audio - 1.5 A (One CommandMic™) 4.0 A (Two CommandMic™ and RX hailer) Operating Temperature Range: –20°C-60°C / –4°F-140°F Antenna Impedance: 50 Ω nominal Dimensions (W x H x D) (Projections Not Included): RF unit - 216 × 79 × 113 mm; 8.5 × 3.1 × 4.4 in. / CommandMic™ - 67.5 × 144.5 × 37 mm; 2.7 × 5.7 × 1.5 in. Approximate Weight: RF unit - 890 g; 2 lb. / CommandMic™ - 400 g; 14.1 oz Transmitter Specifications: Output Power (at 13.8V DC): 25 W, 1 W (high, low) Max. Frequency Deviation: +/- 5 kHz Frequency Tolerance: +/- 0.5 kHz Spurious Emissions: Less than –70 dBc (high power), Less than –56 dBc (low power) Residual Modulation: More than 40 dB Adjacent Channel Power: More than 70 dB Receiver Specifications: Sensitivity: FM (at 12dB SINAD): 0.22 μV typical / DSC (at 1% BER): –7 dBμ emf typical Adjacent Channel Selectivity: FM - More than 70 dB / DSC (1% BER) - More than 73 dBµ emf Spurious Response: FM - More than 70 dB / DSC (1% BER) - More than 73 dBμ emf Intermodulation: FM - More than 75 dB / DSC (1% BER) - More than 68 dBµ emf Hum and Noise: More than 40 dB Audio Output Power: CommandMic™ - More than 2 W (4 Ω, 10% distortion) / Rx hailer - More than 15 W (4 Ω)
$799.95
-
Icom ICOM M510 PLUS AIS VHF BUNDLE W/CT-M500 WIRELESS INTERFACE BOX F/NMEA 2000
M510 PLUS VHF Bundle with CT-M500 Wireless Interface Box for NMEA 2000 M510 PLUS VHF Marine Radio with AIS Stay in touch from anywhere in the boat with the M510 Plus fixed-mount Marine VHF Radio with AIS. Icom’s Class D DSC fixed-mount VHF marine radio with AIS receive capability is nearly half the depth of the M506, allowing installation in more confined spaces. The large color display has a simple user interface, providing casual and serious boaters alike with plenty of options to communicate. Use the RS-M500 app (for iOS™/Android™) to remotely control the M510 through WLAN. Up to three smart devices can be used as a wireless microphone or remote controller in place of the COMMANDMIC™. With its integrated AIS receiver, the IC-M510 Plus can show real-time AIS vessel traffic information on the display. Users can directly make an individual DSC call to selected AIS targets from the AIS screen. The intercom function between the smart device and the radio is also available. Interface Box for NMEA 2000® The CT-M500 wireless interface box provides NMEA 2000™ connectivity and a Two-way Hailer/PA function. The CT-M500 and the radio can be connected through WLAN. This separate interface box option allows for flexibility in positioning the unit closer to the NMEA network connection point. Features: Large color display - 3.5" TFT LCD S-M500 app ( iOS® or Android™) allows you to connect three (3) smart devices to function as a wireless command speaker/microphone Hand microphone with AquaQuake™ Front and back microphone connection ports Optional voice scrambler External speaker connection Supports 4-digit channels Option to connect external GPS M510 PLUS VHF Marine Radio Technical Specifications: Output Power: 25W Frequency Range: Transmit - 156.025 to 157.425 MHz Frequency Range: Receive - 156.050 to 163.275 MHz Waterproof Rating: IP68 GPS: Built-in WLAN: Built-in Connectivity: NMEA 0183 (NMEA 2000™ with the addition of the CT-M500) CT-M500 Technical Specifications: Power Supply Requirements: 11.7 to 15.9 V Waterproof Rating: IPX7 Dimensions (W x H x D): 6.2" x 2.7" 3.2" (15.7 x 6.76 x 8.21 cm) Weight: 5.2 oz (430 g) In the Box: Icom M510 PLUS VHF Marine Radio with AIS Icom CT-M500 Wireless Interface Box Speaker microphone (HM-250RB) DC Power cable Microphone hanger Mounting bracket kit Instruction manual
$799.95
-
Icom ICOM M510 PLUS VHF MARINE RADIO W/AIS
M510 PLUS VHF Marine Radio with AIS Stay in touch from anywhere in the boat with the M510 Plus fixed mount Marine VHF Radio with AIS. Icom’s Class D DSC fixed mount VHF Marine Radio with AIS receive capability. The M510 Plus is nearly half the depth of the M506, allowing installation in more confined spaces. The large color display has a simple user interface allowing casual and serious boaters alike with plenty of options to communicate. Use the RS-M500 app (for iOS™/Android™) to remotely control the M510 through WLAN. Up to three smart devices can be used as a wireless microphone or remote controller in substitute for the COMMANDMIC™. With its integrated AIS receiver, the IC-M510 Plus can show real-time AIS vessel traffic information on the display. You can directly make an individual DSC call to selected AIS targets from the AIS screen. Intercom function between your smart device and the radio is also available. Features: Large color display - 3.5" TFT LCD S-M500 app ( iOS® or Android™) allows you to connect three (3) smart devices to function as a wireless command speaker/microphone Hand microphone with AquaQuake™ Front and back microphone connection ports Optional voice scrambler External speaker connection Supports 4-digit channels Option to connect external GPS Technical Specifications: Output Power - 25W Frequency Range - Transmit - 156.025 to 157.425 MHz Frequency Range - Receive - 156.050 to 163.275 MHz Waterproof Rating - IP68 GPS - Built-in WLAN - Built-in Connectivity - NMEA 0183 (NMEA 2000™ with the addition of the CT-M500) Features: Hand microphone with AquaQuake™ Front and back microphone connection ports Optional voice scrambler External speaker connection Supports 4-digit channels Option to connect external GPS In the Box: M510 Plus VHF radio with AIS Speaker microphone (HM-250RB) DC Power cable Microphone hanger Mounting bracket kit Instruction manual *Sold as you Individual
$799.95
-
Icom Icom GM1600 GMDSS Radio Daily Use Kit with BP234/BP252 and BC173
Icom GM1600 GMDSS VHF with BP234 BatteryModel: GM1600DU 71 USA Operation instructions are printed on the rear panel All operation can be made with one hand Bright LED indicator on the top of panel Optional VOX headset for on-board use The GM1600 Marine VHF handheld is designed for GMDSS compliant survival craft communications. The radio is engineered to survive and function in the extreme environmental conditions common in marine emergencies and brings the latest Search and Rescue technology to the marketplace. The GM1600’s shock-resistant housing is constructed of a brightly colored dye-injected polymer assuring this essential piece of emergency equipment will always be easy to find in a survival bag, in a life raft, or any other place when you need to find it quickly.The GM1600 meets temperature, thermal shock, vibration and drop resistant (from 1 m height) requirements. After passing those environmental tests, the GM1600 sustains 1m depth waterproof construction specified with IMO resolutions A.809(19), A.694(17) and IEC 61097-12. The BP-234 battery can operate even at —4 F.All knobs are sized for quick operation and the large, well-labeled buttons feature a positive action "feel" with a programmable beep tone for sure operation. The front panel includes one touch access to Channel 16 and call channel.What's in the Box: GM1600 VHF BP252 Battery AC Adapter 120v FA-S61V Antenna Charging base Belt Clip Neck Strap BP234 Battery
$749.95
-
Icom Icom M510 VHF
Icom M510 VHF RadioModel: M510 11 USA MMSI reset dongle Hand microphone with AquaQuake™ Front and back microphone connection ports Optional voice scrambler External speaker connection Supports 4-digit channels Option to connect external GPS Icom’s new Class D DSC fixed mount VHF marine transceiver, the M510 is a tech-laden powerhouse. The M510 is nearly half the depth of the M506, allowing installation in more confined spaces. The large color display has a simple user interface allowing casual and serious boaters alike with plenty of options to communicate. Additionally, command and control using iOS® and Android™ smart devices with class leading features such as wireless calling.The M510 includes a full color 3.5" TFT LCD screen with a near 180-degree viewing angles. The standard marine user interface is enhanced with animated functions and night mode for optimal viewing in the dark.The RS-M500 app allows you to connect three iOS® or Android™ smart devices to function as a wireless command speaker/microphone. Use the push-to-talk features, scroll/scan channels, as well as use the M510’s intercom function from the comfort of the captain’s seat. Additionally, one COMMANDMIC™ can connect while 3 other smart devices are linked.Connect to NMEA 2000 with the optional CT-M500 wireless interface box. If the NMEA connection is on a different part of the boat, the CT-M500 can wirelessly connect with the M510, providing flexibility on placement. Additionally, with the optional SP-37 horn speaker, the CT-M500 can access the two-way hailer/PA functions.Specifications General Usable channels USA, INT, CAN, WX channels Type of emission 16K0G3E (FM), 16K0G2B (DSC), 16K0GXW (AIS)* Power supply requirement 13.8V DC (11.7—15.9V DC) Current drain TX (25W output) 5.0A Current drain RX (Max. Audio) 3.3A Operating temperature range —20°C to +60°C; —4°F to +140°F Antenna impedance 50 Ohm Transmitter Output power (at 13.8V DC) 25W, 1W Max. frequency deviation +/- 5.0 kHz Frequency tolerance +/- 0.5 kHz Spurious emissions Less than -70 dBc (at 25W) Residual modulation More than 40 dB More than 40 dB More than 70 dB Receiver Sensitivity (at 12dB SINAD) DSC (1% BER) 0.32 µV typical 0.89 µV emf typical Adjacent channel selectivity DSC (1% BER) More than 75 dB More than 73 dBµ emf Spurious response DSC (1% BER) More than 75 dB More than 73 dBµ emf Intermodulation DSC (1% BER) More than 75 dB More than 68 dBµ emf Hum and noise More than 40 dB Audio output power at 10% distortion More than 15W with a 4Ω external speaker Wireless LAN Wireless LAN standard IEEE 802.11 b/g/n Authentication and Encryption WEP (64/128 bit), WPA-PSK (TKIP), WPA2-PSK (AES) Channels 1 to 13 (2.4 GHz band)** Output power Less than 10 mW/MHz What's in the Box: M510 Speaker microphone, HM-205RB Microphone hanger DC Power Cable Mounting Bracket Kit
$699.95
-
Icom ICOM M510 VHF BUNDLE W/CT-M500 WIRELESS INTERFACE BOX F/NMEA 2000
M510 VHF Bundle with CT-M500 Wireless Interface Box for NMEA 2000 Icom M510 VHF Marine Radio Icom’s Class D DSC fixed mount VHF marine transceiver, the M510 is a tech-laden powerhouse. The M510 is nearly half the depth of the M506, allowing installation in more confined spaces. The large color display has a simple user interface, providing casual and serious boaters alike with plenty of options to communicate. Use the RS-M500 app (for iOS™/Android™) to remotely control the M510 through WLAN. Up to three smart devices can be used as a wireless microphone or remote controller in place of the COMMANDMIC™. An intercom function between a smart device and the radio is also available. Interface Box for NMEA 2000® The CT-M500 wireless interface box provides NMEA 2000™ connectivity and a Two-way Hailer/PA function. The CT-M500 and the radio can be connected through WLAN. This separate interface box option allows for flexibility in positioning the unit closer to the NMEA network connection point. Features: Large color display - 3.5" TFT LCD S-M500 app ( iOS® or Android™) allows users to connect three (3) smart devices to function as a wireless command speaker/microphone Hand microphone with AquaQuake™ Front and back microphone connection ports Optional voice scrambler External speaker connection Supports 4-digit channels Option to connect external GPS M510 VHF Marine Radio Technical Specifications: Output Power: 25W Frequency Range: Transmit - 156.025 to 157.425 MHz Frequency Range: Receive - 156.050 to 163.275 MHz Waterproof Rating: IP68 GPS: Built-in WLAN: Built-in Connectivity: NMEA 0183 (NMEA 2000™ with the addition of the CT-M500) CT-M500 Technical Specifications: Power Supply Requirements: 11.7 to 15.9 V Waterproof Rating: IPX7 Dimensions (W x H x D): 6.2" x 2.7" 3.2" (15.7 x 6.76 x 8.21 cm) Weight: 5.2 oz (430 g) In the Box: M510 VHF radio Icom CT-M500 Wireless Interface Box Speaker microphone (HM-250RB) DC Power cable Microphone hanger Mounting bracket kit Instruction manual
$699.95
-
Icom ICOM M510 VHF MARINE RADIO
M510 VHF Marine Radio Icom’s Class D DSC fixed mount VHF marine transceiver, the M510 is a tech-laden powerhouse. The M510 is nearly half the depth of the M506, allowing installation in more confined spaces. The large color display has a simple user interface allowing casual and serious boaters alike with plenty of options to communicate. Use the RS-M500 app (for iOS™/Android™) to remotely control the M510 through WLAN. Up to three smart devices can be used as a wireless microphone or remote controller in substitute for the COMMANDMIC™. Intercom function between your smart device and the radio is also available. Features: Large color display - 3.5" TFT LCD S-M500 app ( iOS® or Android™) allows you to connect three (3) smart devices to function as a wireless command speaker/microphone Hand microphone with AquaQuake™ Front and back microphone connection ports Optional voice scrambler External speaker connection Supports 4-digit channels Option to connect external GPS Technical Specifications: Output Power - 25W Frequency Range - Transmit - 156.025 to 157.425 MHz Frequency Range - Receive - 156.050 to 163.275 MHz Waterproof Rating - IP68 GPS - Built-in WLAN - Built-in Connectivity - NMEA 0183 (NMEA 2000™ with the addition of the CT-M500) In the Box: M510 VHF radio Speaker microphone (HM-250RB) DC Power cable Microphone hanger Mounting bracket kit Instruction manual *Sold as you Individual
$699.95
-
Icom Icom M410BB Black Box VHF With HM195GW White
icom M411BB Black Box VHF with HM195GW White CommandMicModel: M410 BB GW 11 USAIcom’s M410BB is a flexible black box fixed mount that provides VHF communications for vessels with limited helm space. The supplied CommandMic™ controls the radio for essential communications on the water.The M410BB consists of a CommandMic™ and black box RF unit. Use the CommandMic™ for all operations including DSC. Install the RF unit out-of-sight, place up to 60 ft (18.3 m)* away from the CommandMic™.Add an additional CommandMic™ to extend communication points for boats requiring a second comms station. This is ideal for boats needing communication between the cockpit and other locations on the boat. Access the intercom functions for one-to-all or one-to-one communications on the boat.On the back of every CommandMic™ is a conveniently located DSC button. Once triggered, the M410BB transmits a DSC alert signal to nearby vessels with the MMSI* and GPS location of your vessel.The NMEA 2000® network provides plug-and-play data communication to inter-connect other marine equipment such as an MFD (Multi-Function Display). The radio can send AIS, GNSS (GPS) position, DSC call, and radio channels to other equipment.The built-in 15W amplifier increases the audio output of an external hailer speaker. The one-way RX hailer function enables you to broadcast radio traffic through the hailer speaker to listen to radio traffic on the deck or tower. You can also sound foghorn patterns from the hailer speaker.The Active Noise Cancelling function digitally removes background noise from transmitting and receiving audio to provide clear communications in noisy maritime environments.Specifications General Usable channels USA, INT, CAN, WX channels Power supply requirement 13.8 V DC nominal (11.7 ~ 15.9 V DC) (Negative ground) Current drain (at 13.8 V DC) TX Max. power - 5.5 A Max.RX Max. audio - 1.5 A (One CommandMic™) 4.0 A (Two CommandMic™ and RX hailer) Operating temperature range —20°C ~ 60°C, —4#176;F ~ 140°F Antenna impedance 80 ohm nominal Weight (approx.) RF unit - 890 g; 2 lbCommandMic™ - 400 g; 14.1 oz Transmitter Output power (at 13.8V DC) 25 W, 1 W (High, Low) Max. frequency deviation ±5 kHz Frequency tolerance ±0.5 kHz Spurious emissions Less than —70 dBc (High power), Less than —56 dBc (Low power) Residual modulation More than 40 dB Adjacent channel power More than 70 dB Receiver Sensitivity FM (at 12dB SINAD) 0.22 µV typical Sensitivity DSC (at 1% BER) —7 dBµemf typical Adjacent channel selectivity FM More than 70 dB Adjacent channel selectivity DSC (1% BER) More than 73 dBµ emf Spurious response FM More than 70 dB Spurious response DSC (1% BER) More than 73 dBµ emf Intermodulation FM More than 75 dB Intermodulation DSC (1% BER) More than 68 dBµ emf Hum and noise More than 40 dB What's in the Box: IC-M410BB DC power cable (2 m) Microphone Hanger Connection cable, OPC-1540 (6.1 m, 20 ft) CommandMic™, HM-195GW Connector cap Mounting base
$649.95
-
Icom Icom M410BB Black Box VHF With HM195GB Black
icom M411BB Black Box VHF with HM195GB Black CommandMicModel: M410 BB 11 USAIcom’s M410BB is a flexible black box fixed mount that provides VHF communications for vessels with limited helm space. The supplied CommandMic™ controls the radio for essential communications on the water.The M410BB consists of a CommandMic™ and black box RF unit. Use the CommandMic™ for all operations including DSC. Install the RF unit out-of-sight, place up to 60 ft (18.3 m)* away from the CommandMic™.Add an additional CommandMic™ to extend communication points for boats requiring a second comms station. This is ideal for boats needing communication between the cockpit and other locations on the boat. Access the intercom functions for one-to-all or one-to-one communications on the boat.On the back of every CommandMic™ is a conveniently located DSC button. Once triggered, the M410BB transmits a DSC alert signal to nearby vessels with the MMSI* and GPS location of your vessel.The NMEA 2000® network provides plug-and-play data communication to inter-connect other marine equipment such as an MFD (Multi-Function Display). The radio can send AIS, GNSS (GPS) position, DSC call, and radio channels to other equipment.The built-in 15W amplifier increases the audio output of an external hailer speaker. The one-way RX hailer function enables you to broadcast radio traffic through the hailer speaker to listen to radio traffic on the deck or tower. You can also sound foghorn patterns from the hailer speaker.The Active Noise Cancelling function digitally removes background noise from transmitting and receiving audio to provide clear communications in noisy maritime environments.Specifications General Usable channels USA, INT, CAN, WX channels Power supply requirement 13.8 V DC nominal (11.7 ~ 15.9 V DC) (Negative ground) Current drain (at 13.8 V DC) TX Max. power - 5.5 A Max.RX Max. audio - 1.5 A (One CommandMic™) 4.0 A (Two CommandMic™ and RX hailer) Operating temperature range —20°C ~ 60°C, —4°F ~ 140°F Antenna impedance 80 ohm nominal Weight (approx.) RF unit - 890 g; 2 lbCommandMic™ - 400 g; 14.1 oz Transmitter Output power (at 13.8V DC) 25 W, 1 W (High, Low) Max. frequency deviation ±5 kHz Frequency tolerance ±0.5 kHz Spurious emissions Less than —70 dBc (High power), Less than —56 dBc (Low power) Residual modulation More than 40 dB Adjacent channel power More than 70 dB Receiver Sensitivity FM (at 12dB SINAD) 0.22 µV typical Sensitivity DSC (at 1% BER) —7 dBµ emf typical Adjacent channel selectivity FM More than 70 dB Adjacent channel selectivity DSC (1% BER) More than 73 dBµ emf Spurious response FM More than 70 dB Spurious response DSC (1% BER) More than 73 dBµ emf Intermodulation FM More than 75 dB Intermodulation DSC (1% BER) More than 68 dBµ emf Hum and noise More than 40 dB What's in the Box: IC-M410BB DC power cable (2 m) Microphone Hanger Connection cable, OPC-1540 (6.1 m, 20 ft) CommandMic™, HM-195GB Connector cap Mounting base
$649.95
-
Icom Icom AT-140 Antenna Tuner
Icom AT-140 Antenna TunerModel: AT140 For use with ICOM ssb radios Matches Radio to antenna impedance Waterproof enclosure For m-700, m-710, m-802 ICOM automatic antenna tuner, manufacturer's part number AT-140, matches the ssb transceiver to a long wire or whip antenna with little insertion loss. Cable connections are easy to install. For m700pro, M710, and M802. 11"W x 15"H x 3.5"D; wt: 20 lbsSpecifications Product Dimensions 17 x 12 x 5 inches ; 6.8 pounds
$595.13
-
Icom Icom AT-130 Tuner
$574.17
-
Icom Icom RC-M600 Remote Controller For M605
Icom RC-M600 Remote Control Model: RC-M600 Command head for M605. Comes with OPC-2383 & HM-205RB. What's in the Box: RC-M600 HM-205RB OPC-2383
$554.94
-
Icom Icom M85UL Hand Held VHF Intrinsically Safe
Icom M85UL Hand Held VHF Intrinically SafeModel: M85UL 31 USA AquaQuake™ prevents water-logged speaker Internal VOX capability for hands-free operation Weather channel receiving Self check function checks internal temperature and connected battery voltage Priority scan function Dual/tri-watch function for monitoring CH16 and/or call channel Favorite channel function for quick access to often used channels Built-in voice scrambler (32 codes)* The M85 is the smallest, lightest and toughest radio on the market today!The M85 can withstand hazardous and inhospitable environments at sea and on land, as it is built to MIL-STD 810. The IP67 waterproof rating protects the radio, even if dropped in the water. Yacht and commercial customers like the M85 because of the 100 programmable land mobile channels, as well as the easy to use built-in voice scrambler for private communications. The M85 is full of the features you need including an automated emergency alarm.The M85 user-friendly display includes icons and indicators like transmit power, VOX ON/OFF, battery status, scan, weather channel and more. These icons and indictors improve the user-experience and operation. The M85 also includes a continuous 20-position rotary selector and ON/OFF volume knob, which is tilted for easy access.For emergency situations the M85 includes the MOB Alarm, Man Down and lone worker functions. If one of these functions is activated, the radio automatically makes an emergency alarm.The M85* built-in voice scrambler provides private communications between stations. The multi-function button on the top of the radio can be assigned to the scrambler function for easy activation. Or use the multi-function button to simply change from marine to land mobile frequencies.In addition to VHF marine channels, the M85 covers 136—174MHz land mobile frequencies. Up to 100 programmable channels are available for land mobile use at 2W output power. Each channel is programmable with CTCSS and DTCS tone. Proper licensing is required to operate within the above land mobile frequencies.Built to withstand the elements, the submersible M85IS* intrinsically safe VHF handheld is perfect for commercial customers working in harsh environments. The M85IS* plus the BP292IS*, HM184IS* all meet ANSI/TIA-4950-A, ANSI/UL 121201 requirements for:Specifications General Frequency coverage Marine Tx 156.025—157.425 MHz Marine Rx 156.050—163.275 MHz Land Mobile Tx/Rx 136.000—174.000 MHz Usable channels Marine Channels Tx/Rx INT, USA*, CAN, WX* channel (* Varies according to version) Land Mobile Channels Tx/Rx 100 LMR channels Type of emissions (Channel spacing) Marine 25 kHz LMR LMR 12.5 kHz Antenna Impedance 50Ω Current drain Marine Tx 1.5A (at 5W) Land Mobile Tx 0.9A (at 2W) x Max. audio 0.45A Power supply requirement 7.2 V DC nominal Operating temperature range Marine —20 °C to +60 °C; —4 °F to +140 °F LMR —30 °C to +60 °C; —22 °F to +140 °F Antenna Impedance 50Ω Receiver Sensitivity (at 12dB SINAD) 0.25 µV typical Adjacent Channel Selectivity Marine channels 70 dB typical LMR channels 70 dB typical (Wide) / 55 dB typical (Narrow) Spurious response 70 dB typical Hum and noise Marine channels 40 dB LMR channels 40 dB (Wide) / 34 dB (Narrow) Audio output power Internal SP 700 mW typical (at 10% distortion with 12Ω load) External SP 700 mW (at 10% distortion with 8Ω load) What's in the Box: M85UL BP-292UL, battery pack FA-SC58V, antenna BC-227, desktop charger MBB-3, Belt clip BC-123SA, AC adapter Hand strap
$449.95
-
Icom Icom M400BB SW Black Box VHF With HM195 White
Black Box Transceiver - Icom Quality. Small Footprint. Space-saving, two-piece configuration The IC-M400BB consists of a two-piece, black box configuration. All function control including DSC operation, can be made from the COMMANDMICIV™, HM-195B/SW, and the RF unit, IC-M400BB, can be installed in an out-of-sight place. New intuitive user interface The new menu system is shared with Icom's latest models. The bottom line of the dot-matrix display shows the software key functions which can be toggled with the left and right buttons. Active noise cancelling The built-in bidirectional active noise cancelling reduces background noise to up to 90% and improves both your transmitted voice and incoming call. Hear and be heard more clearly. 10W Loud Audio, Public Address and Foghorn The IC-M400BB has a built-in 10W amplifier that increases the audio output from an additional external speaker. The public address function allows you to make an announcement from the microphone like a loud speaker, and the foghorn can also be emitted from the external speaker. Built-in Class D DSC The built-in DSC watch function monitors Ch. 70 (DSC channel) activity, even while you are receiving another channel. DSC functions include: distress, individual, group, all ships, urgency, safety, position request/report, polling request and DSC test calls. Common NMEA Interface When connected to an external GPS receiver, current position and time are shown on the COMMANDMICTM display. When receiving DSC information from another vessel, the radio can transfer it to a navigational device via NMEA 0183 connectivity. AIS Target Call with MA-500TR When connected to the optional MA-500TR Class B AIS transponder, the AIS target call function allows you to set up an individual DSC call from the MA-500TR. Additional features include MarineCommander™ compatible AquaQuake™ water draining function IPX7 submersible protection both for IC-M400BB and HM-195SW (1m depth for 30 minutes) Dual/tri-watch function for monitoring Ch.16 and/or call channel Priority and normal scan Specifications General Frequency Range Tx Rx Ch. 70 156.025-157.425MHz 156.050-163.275MHz 156.525MHz Usable channel groups INT, USA, CAN and WX channels Type of emission 16K0G3E (FM), 16K0G2B (DSC) Power supply requirement 13.8V DC nominal (11.7-15.9V DC) Current drain (at 7.4V DC) Tx (at 25W output) Rx (Max. audio) 5.5A Max. 3.5A Max. Operating temperature range -20 C to +60 C; -4 F to +140 F Antenna Impedance 50Ω (SO-239) Dimensions (W H D) IC-M400BB HM-195B/SW 216 79 125mm; 8.5 3.11 4.92 in 67.5 144.5 37mm; 2.66 5.69 1.46 in Weight (approx.) IC-M400BB HM-195B/SW 830g; 1.83 lb 400g; 14.1 oz NMEA in/out formats RMC, GGA, GNS, GLL, DSC, DSE Transmitter Output power (Hi/Low) 25W, 1W (High, low) Max. frequency deviation 5.0 kHz Frequency tolerance 10ppm Spurious emissions Less than -70dBc (at 25W) Receiver Sensitivity Main Ch. 70 0.22μV typical (at 12dB SINAD) -5dBμ emf typ. (1% BER) Squelch sensitivity Less than 0.32μV Adjacent Channel Selectivity Main Ch. 70 More than 70dB More than 73dBμ emf (1% BER) Spurious response Main Ch. 70 More than 70dB More than 73dBμ emf (1% BER) Intermodulation Main Ch. 70 More than 70dB More than 68dBμ emf (1% BER) Hum and noise ratio More than 40dB Audio output power Internal speaker External speaker More than 2W (HM-195SW) More than 10W (RX Speaker) Measurements made in accordance with TIA/EIA 603 and IEC 62238 (Ch. 70 receiver specifications). Applicable IP Rating Ingress Protection Standard (IC-M400BB and HM-195SW) Water IPX7 (Waterproof protection
$429.96
-
Icom Icom M400BB Black Box VHF With HM195 Black
Black Box Transceiver - Icom Quality. Small Footprint. Space-saving, two-piece configuration The IC-M400BB consists of a two-piece, black box configuration. All function control including DSC operation, can be made from the COMMANDMICIV™, HM-195B/SW, and the RF unit, IC-M400BB, can be installed in an out-of-sight place. New intuitive user interface The new menu system is shared with Icom's latest models. The bottom line of the dot-matrix display shows the software key functions which can be toggled with the left and right buttons. Active noise cancelling The built-in bidirectional active noise cancelling reduces background noise to up to 90% and improves both your transmitted voice and incoming call. Hear and be heard more clearly. 10W Loud Audio, Public Address and Foghorn The IC-M400BB has a built-in 10W amplifier that increases the audio output from an additional external speaker. The public address function allows you to make an announcement from the microphone like a loud speaker, and the foghorn can also be emitted from the external speaker. Built-in Class D DSC The built-in DSC watch function monitors Ch. 70 (DSC channel) activity, even while you are receiving another channel. DSC functions include: distress, individual, group, all ships, urgency, safety, position request/report, polling request and DSC test calls. Common NMEA Interface When connected to an external GPS receiver, current position and time are shown on the COMMANDMICTM display. When receiving DSC information from another vessel, the radio can transfer it to a navigational device via NMEA 0183 connectivity. AIS Target Call with MA-500TR When connected to the optional MA-500TR Class B AIS transponder, the AIS target call function allows you to set up an individual DSC call from the MA-500TR. Additional features include MarineCommander™ compatible AquaQuake™ water draining function IPX7 submersible protection both for IC-M400BB and HM-195B/SW (1m depth for 30 minutes) Dual/tri-watch function for monitoring Ch.16 and/or call channel Priority and normal scan Specifications General Frequency Range Tx Rx Ch. 70 156.025-157.425MHz 156.050-163.275MHz 156.525MHz Usable channel groups INT, USA, CAN and WX channels Type of emission 16K0G3E (FM), 16K0G2B (DSC) Power supply requirement 13.8V DC nominal (11.7-15.9V DC) Current drain (at 7.4V DC) Tx (at 25W output) Rx (Max. audio) 5.5A Max. 3.5A Max. Operating temperature range -20°C to +60°C; -4°F to +140°F Antenna Impedance 50Ω (SO-239) Dimensions (W H D) IC-M400BB HM-195B/SW 216 79 125mm; 8.5 3.11 4.92 in 67.5 144.5 37mm; 2.66 5.69 1.46 in Weight (approx.) IC-M400BB HM-195B/SW 830g; 1.83 lb 400g; 14.1 oz NMEA in/out formats RMC, GGA, GNS, GLL, DSC, DSE Transmitter Output power (Hi/Low) 25W, 1W (High, low) Max. frequency deviation ± 5.0 kHz Frequency tolerance ±10ppm Spurious emissions Less than -70dBc (at 25W) Receiver Sensitivity Main Ch. 70 0.22μV typical (at 12dB SINAD) -5dBμ emf typ. (1% BER) Squelch sensitivity Less than 0.32μV Adjacent Channel Selectivity Main Ch. 70 More than 70dB More than 73dBμ emf (1% BER) Spurious response Main Ch. 70 More than 70dB More than 73dBμ emf (1% BER) Intermodulation Main Ch. 70 More than 70dB More than 68dBμ emf (1% BER) Hum and noise ratio More than 40dB Audio output power Internal speaker External speaker More than 2W (HM-195B/SW) More than 10W (RX Speaker) Measurements made in accordance with TIA/EIA 603 and IEC 62238 (Ch. 70 receiver specifications). Applicable IP Rating Ingress Protection Standard (IC-M400BB and HM-195B/SW) Water IPX7 (Waterproof protection
$429.96
-
Icom Icom M94D Hand Held VHF
Icom M94D 6 Watt hand Held VHF with AIS and DSCModel: M94D 21 USA Simpli ed AIS and Class-H DSC 6 W RF Output Power Class-Leading 1500 mW Audio Output Simpli ed Navigation Function 10 Hours (approx.) of Long Operating Time* Float'n Flash and MOB Auto Set Functions IPX7 submersible (1 m depth of water for 30 minutes) Active noise canceling technology Integrated GPS receiver AquaQuake™ prevents audio degradation from a water-logged speaker Dual watch and Tri-watch functions Weather channel receive ( for USA version) The simplified AIS and DSC functions add further assurance for safety at sea. With the integrated AIS receiver, real-time AIS vessel traffic information are shown on the display. The AIS target call function allows you to easily set up a DSC individual call. Distress calls can be made with the rear panel button.The IC-M94D’s 6 watts of transmit power provides extended communication range for the user. Supplied 2400 mAh (typical) high capacity Li-ion battery, BP-306 provides 10 hours of operating time, under normal conditions* .Icom’s custom high-power capacity speaker delivers a loud 1500 mW (typical) audio output with improved acoustic sound clarity for noisy maritime environments.The Navigation function guides you to a specified waypoint. You can assign a maximum of 50 favorite fishing spots or destinations as waypointsThe radio floats with a flashing LED light to help you retrieve it from the water. Pressing the distress button while Float’n Flash is working will transmit the MOB distress signal, rather than the plain undesignated one for better protection of sailors*Approximate, typical operation with 5:5:90 duty ratio.What's in the Box: M94D BP-306 battery pack BC-251 battery charger AC adapter CP-26 cigarette lighter cable MB-133 belt clip Antenna Hand strap
$349.95
-
Icom Icom M85 Hand Held VHF
Icom M85 Handheld VHFModel: IC-M85 21 USA Built-in voice scrambler (32 codes) AquaQuake™ prevents water-logged speaker Internal VOX capability for hands-free operation Weather channel receiving Self check function checks internal temperature and connected battery voltage Priority scan function Dual/tri-watch function for monitoring CH16 and/or call channel Favorite channel function for quick access to often used channels The M85 is the smallest, lightest and toughest radio on the market today!The M85 can withstand hazardous and inhospitable environments at sea and on land, as it is built to MIL-STD 810. The IP67 waterproof rating protects the radio, even if dropped in the water. Yacht and commercial customers like the M85 because of the 100 programmable land mobile channels, as well as the easy to use built-in voice scrambler for private communications. The M85 is full of the features you need including an automated emergency alarm.The M85 user-friendly display includes icons and indicators like transmit power, VOX ON/OFF, battery status, scan, weather channel and more. These icons and indictors improve the user-experience and operation. The M85 also includes a continuous 20-position rotary selector and ON/OFF volume knob, which is tilted for easy access.For emergency situations the M85 includes the MOB Alarm, Man Down and lone worker functions. If one of these functions is activated, the radio automatically makes an emergency alarm.The M85’s built-in voice scrambler provides private communications between stations. The multi-function button on the top of the radio can be assigned to the scrambler function for easy activation. Or use the multi-function button to simply change from marine to land mobile frequencies.In addition to VHF marine channels, the M85 covers 136—174MHz land mobile frequencies. Up to 100 programmable channels are available for land mobile use at 2W output power. Each channel is programmable with CTCSS and DTCS tone.Specifications Marine channels USA, INT, CAN, WX channels Land mobile frequency 136.000—174.000 MHz Landmobile channels 100 programmable Channel spacing Marine 25 kHz LMR 25/12.5 kHz Current drain Marine Tx 1.5 A @ 5 watts Marine Rx 0.45 A Land mobile TX 0.9A @ 2 watts Land mobile Rx 0.45 A Output power Marine 5/3/1 W Output power land mobile 2/1 W Dimensions 2.2 3.6 1.1 in (With BP-290), projectiocs nto included What's in the Box: IC-M85 BP-290 battery BC-227 Rapid charger BC-123S AC Adapter FA-SC58V Antenna MBB-3 belit clip Hand strap
$329.95
-
Icom Icom M424G White VHF Radio Class D DSC Built-in GPS
Icom M424G White VHF Radio Built in Class D DSC and GPSModel: M424G White Simple remote control speaker-microphone, HM-205B/SW NMEA 0183 connectivity MarineCommander™ compatible AquaQuake™ draining function IPX7 submersible protection (1m depth for 30 minutes) Weather channels with alert function Dual/tri-watch function Priority and normal scan Intuitive User Interface and White Backlit LCD and Keypad Incorporating Icom’s common Marine Family User Interface designed for simple, intuitive operation. A rotary selector and directional keypad provide quick and easy access to the intended functions. The high contrast white backlit LCD and laser-cut keypad match well with modern boat designs.Active noise cancelling The built-in active noise cancelling provides superb performance. It reduces background noise up to 90% in the received signal and 30% in the transmits signal.10W Loud Audio, Public Address and Foghorn The IC-M424G has a built-in 10W amplifier that increases the audio output to an external PA speaker. The public address function allows you to make an announcement from the microphone like a loud speaker, the foghorn can also be emitted from the external PA speaker.Built-in Class D DSC The built-in DSC watch function monitors Ch. 70 (DSC channel) activity, even while you are receiving another channel. DSC functions include: distress, individual, group, all ships, urgency, safety, position request/report, polling request and DSC test calls.Built-in GPS Receiver The built-in GPS receiver shows your current position, date/time and can be used for DSC calls. The GPS data source is selectable from internal and external GPS.Optional White Backlit COMMANDMIC™ HM-195GB/GW The optional white backlit COMMANDMIC makes it convenient for using the IC-M424G from a separate cabin or tower. All functions of the IC-M424G can be controlled from the COMMANDMIC and can be used as an intercom with the IC-M424G.AIS Target Call with MA-510TR When connected to the optional MA-510TR Class B AIS transponder, the AIS target call function allows you to make an individual DSC call without having to manually input an MMSI number.Specifications General Frequency Range Tx - 156.025—157.425 MHz Rx - 156.050—163.275 MHz Ch70 - 156.525 MHz Usable Channels USA, CAN, INT, WX channels Operating Temperature Range -20°C to +60°C; -4°F to +140°F Antenna Impedance 50ohm (SO-239) NMEA in/Out Formats RMC, GGA, GNS, GLL, DSC, DSE Transmitter Output Power @ 13.Vdc 25W, 1W Max frequency Deviation ± 5 kHz Frequency Tolerance ±10ppm (-20°C to +60°C) Spurious emissions Less than —70dBc (High) Less than —56dBc (Low) Receiver Sensitivity Main -13dBµ typ. (12dB SINAD) CH70 —5dBµ emf typ. (1% BER) Squelch Sensitivity Less than —10dBµ Audio output power (at 10% distortion, 4? load) 4.5W typical Input Voltage 13.8V DC nominal (11.7—15.9V DC) Input Draw up to 5.5Amps Dimensions 7.09 3.23 4.72 in What's in the Box: M424G White Bracket and Knobs Powercord Hand Microphone HM205
$329.95
-
Icom Icom M424G Black VHF Radio Class D DSC Built-in GPS
Icom M424G Black VHF Radio Built in Class D DSC and GPSModel: M424G Black Simple remote control speaker-microphone, HM-205B/SW NMEA 0183 connectivity MarineCommander™ compatible AquaQuake™ draining function IPX7 submersible protection (1m depth for 30 minutes) Weather channels with alert function Dual/tri-watch function Priority and normal scan Intuitive User Interface and White Backlit LCD and Keypad Incorporating Icom’s common Marine Family User Interface designed for simple, intuitive operation. A rotary selector and directional keypad provide quick and easy access to the intended functions. The high contrast white backlit LCD and laser-cut keypad match well with modern boat designs.Active noise cancelling The built-in active noise cancelling provides superb performance. It reduces background noise up to 90% in the received signal and 30% in the transmits signal.10W Loud Audio, Public Address and Foghorn The IC-M424G has a built-in 10W amplifier that increases the audio output to an external PA speaker. The public address function allows you to make an announcement from the microphone like a loud speaker, the foghorn can also be emitted from the external PA speaker.Built-in Class D DSC The built-in DSC watch function monitors Ch. 70 (DSC channel) activity, even while you are receiving another channel. DSC functions include: distress, individual, group, all ships, urgency, safety, position request/report, polling request and DSC test calls.Built-in GPS Receiver The built-in GPS receiver shows your current position, date/time and can be used for DSC calls. The GPS data source is selectable from internal and external GPS.Optional White Backlit COMMANDMIC™ HM-195GB/GW The optional white backlit COMMANDMIC makes it convenient for using the IC-M424G from a separate cabin or tower. All functions of the IC-M424G can be controlled from the COMMANDMIC and can be used as an intercom with the IC-M424G.AIS Target Call with MA-510TR When connected to the optional MA-510TR Class B AIS transponder, the AIS target call function allows you to make an individual DSC call without having to manually input an MMSI number.Specifications General Frequency Range Tx - 156.025—157.425 MHz Rx - 156.050—163.275 MHz Ch70 - 156.525 MHz Usable Channels USA, CAN, INT, WX channels Operating Temperature Range -20°C to +60°C; -4°F to +140°F Antenna Impedance 50Ω (SO-239) NMEA in/Out Formats RMC, GGA, GNS, GLL, DSC, DSE Transmitter Output Power @ 13.Vdc 25W, 1W Max frequency Deviation ± 5 kHz Frequency Tolerance ±10ppm (-20°C to +60°C) Spurious emissions Less than —70dBc (High) Less than —56dBc (Low) Receiver Sensitivity Main -13dBµ typ. (12dB SINAD) CH70 —5dBµ emf typ. (1% BER) Squelch Sensitivity Less than —10dBµ Audio output power (at 10% distortion, 4Ω load) 4.5W typical Input Voltage 13.8V DC nominal (11.7—15.9V DC) Input Draw up to 5.5Amps Dimensions 7.09 3.23 4.72 in What's in the Box: M424G Black Bracket and Knobs Powercord Hand Microphone HM205
$329.95
-
Icom Icom M73 Plus Hand Held VHF
Icom M73 Handheld VHFModel: M73 61 USA AquaQuake™ water draining function Dual/Tri-Watch function for monitoring Channel 16 and/or call channel 4 level battery indicator Favorite channel and tag scan functions Auto power save function Active noise cancelling to reduce background noise to hear conversations better. Bass boost function provides a rich bass sound for both transmit and receive signals. Last call voice recording automatically saves the last incoming call for one minute. You can also start recording manually. The M73’s ergonomic design fits easily in the user’s hand and is a rugged, durable radio. The large screen and high intensity LCD offers bright, easy to read characters. Yacht customers benefit from the optional VOX headset and adapter option that allows someone handling dock lines to use both hands, while docking the boat, simultaneously communicating with the captain.Specifications Output Power: 6 Watts Battery Life: 2000mAh Li-ion battery, up to 16 hours Waterproof Rating: IPX8 Dimensions (W H D) (Projections not included) 2.07 4.92 1.18 in What's in the Box: M73 Plus Cigarette lighter cable, CP-25H Rapid charger, BC-210 Handheld strap Belt clip, MB-103 AC adapter, BC-123SA Battery pack, BP-245N Antenna, FA-S59V
$299.95
-
$258.00
-
Icom Icom M330G Black VHF With GPS
Icom M330G Black 25 Watt VHF With GPSModel: IC-M330G BLACK AquaQuake™ draining function Built-in Class D DSC with a CH70 dedicated receiver Common NMEA interface for external GPS/NAV connection Tag scan and favorite channel functions Dual/tri-watch function for monitoring CH16 and/or call channel Priority scan function Display and keypad backlighting Weather channel with weather alert 3-digit or 4-digit channel display selectable The M330 series gives you the same performance and feature set as the M324 series, but now within a smaller package to fit in tight spaces. Priced at a great value the M330 series still includes the exclusive AquaQuake™ draining feature, 25 watts of power, IPX7 Waterproof rating, scan/select scan and Icom’s exclusive user interface for ease of use.The M330’s small size makes it easy to install into vessels with limited space. The dot-matrix display is clear and easy to read. A combination of the directional keypad and soft keys provides simple, smooth operation. Most used functions are assigned to soft keys for quick one push function access.The M330G includes a built-in GPS receiver, but still allows for an optional external GPS antenna for enclosed helm installations. A built-in GPS receiver provides your location, bearing and speed by using information from GPS, GLONASS and SBAS. Hook up an external GPS antenna, which helps for an easier DSC installation. Use the acquired position information for DSC calls.Specifications Usable channels USA, CAN, INT, WX channels Current drain (at 13.8V DC) Tx 25W output - 5A Rx AF max. - 1A Operating temperature range -20°C to +60°C; -4°F to +140°F Output power (at 13.8V DC) 25W/1W Dimensions 6.2 2.6 4.3 in What's in the Box: M330G Black Microphone Power Cable Mounting Bracket kit GPS antenna (5 m; 16.4 ft cable)
$258.00
-
Icom Icom M73 Hand Held VHF
Icom M73 Handheld VHFModel: M73 61 USA AquaQuake™ water draining function Dual/Tri-Watch function for monitoring Channel 16 and/or call channel 4 level battery indicator Favorite channel and tag scan functions Auto power save function The M73’s ergonomic design fits easily in the user’s hand and is a rugged, durable radio. The large screen and high intensity LCD offers bright, easy to read characters. Yacht customers benefit from the optional VOX headset and adapter option that allows someone handling dock lines to use both hands, while docking the boat, simultaneously communicating with the captain.Specifications Output Power: 6 Watts Battery Life: 2000mAh Li-ion battery, up to 16 hours Waterproof Rating: IPX8 Dimensions (W H D) (Projections not included) 2.07 4.92 1.18 in What's in the Box: M73 Cigarette lighter cable, CP-25H Rapid charger, BC-210 Handheld strap Belt clip, MB-103 AC adapter, BC-123SA Battery pack, BP-245N Antenna, FA-S59V
$249.95
-
$234.81
-
Icom Icom BP234 Lithium Battery For GM1600
Icom BP234 Lithium Battery For GM1600Model: BP234 This battery pack is for EMERGENCY USE ONLY. It is a submersible, waterproof, 9.0V, 3300 mAh battery pack. Usable temperature range is within —20°C to +55°C (—4°F to +131°F). Use the specified chargers (BC-173). NEVER use another manufacturer’s charger. Use the supplied power adapter for the BC-173. NEVER use another manufacturer’s adapters. The optional BP-234 battery pack is a non-rechargeable, Lithium battery pack for operation in a survival craft. BE SURE to replace the battery pack with a new one approximately five years after manufacturing, even if it still holds a charge. The inside battery material will become weak after a period of time, even with little use. The estimated number of times you can charge the battery is between 300 and 500. Even when the battery appears to be fully charged, the operating time of the transceiver may become short when: Approximately five years have passed since the battery was manufactured. The battery has been repeatedly charged.Specifications Product Dimensions 3 x 2 x 1 inches ; 4.8 ounces Shipping Weight 5.4 ounces
$217.75
-
Icom Icom HM195SW Command Mic IV Super White Second Station
Icom CommandMic IV HM195B Remote - WhiteModel: HM195B SW 41 EXP IPX7 Submersible rating Superior audio performance Total control of all communications & Class D DSC functions AquaQuake™ The COMMANDMICIVTM (HM-195) remote-control microphone size (W H D): 67.5 144.5 37 mm; 2.66 5.69 1.46 in. A new look for total control of all communications and Class D DSC functions.The new menu system provides easy and intuitive operation. The bottom line of the dot-matrix display shows the software key functions which can be toggled with the left and right buttons. The directional keypad allows you to perform various operations and settings.What's in the Box: HM195SW White Remote 6.1m (20ft) of cable Microphone hanger Mounting base for connector
$208.73
-
Icom Icom HM195GW Command Mic IV White Second Station
Icom HM195GW CommandMic IV WhiteModel: HM195GW 62 EXP IPX7 Submersible rating Superior audio performance Total control of all communications & Class D DSC functions AquaQuake The optional white backlit COMMANDMIC, HM-195G makes it convenient when used with the IC-M424G, IC-M510, and IC-M605 to create a separate station in a separate cabin or tower. All functions of the fixed mounts can be controlled from the COMMANDMIC and can be used as an intercom.What's in the Box: HM195GW Remote 6.1m (20ft) of cable Microphone hanger Mounting base for connector
$208.73
-
Icom Icom HM195GB Command Mic IV Black Second Station
Icom HM195GB CommandMic IV BlackModel: HM195GB 61 EXP IPX7 Submersible rating Superior audio performance Total control of all communications & Class D DSC functions AquaQuake The optional white backlit COMMANDMIC, HM-195G makes it convenient when used with the IC-M424G to create a separate station in a separate cabin or tower. All functions of the IC-M424G can be controlled from the COMMANDMIC and can be used as an intercom with the IC-M424G. The HM-195G comes in Black and Super white.What's in the Box: HM195GB Remote 6.1m (20ft) of cable Microphone hanger Mounting base for connector
$208.73
-
Icom Icom HM195B Command Mic IV Black Second Station
Icom CommandMic IV HM195B Remote - BlackModel: HM195B 41 EXP IPX7 Submersible rating Superior audio performance Total control of all communications & Class D DSC functions AquaQuake™ The COMMANDMICIVTM (HM-195) remote-control microphone size (W H D): 67.5 144.5 37 mm; 2.66 5.69 1.46 in. A new look for total control of all communications and Class D DSC functions.The new menu system provides easy and intuitive operation. The bottom line of the dot-matrix display shows the software key functions which can be toggled with the left and right buttons. The directional keypad allows you to perform various operations and settings.What's in the Box: HM195B Black Remote 6.1m (20ft) of cable Microphone hanger Mounting base for connector
$208.73
-
Icom Icom M330 White VHF
Icom M330 White 25 Watt VHFModel: IC-M330 WHITE AquaQuake™ draining function Built-in Class D DSC with a CH70 dedicated receiver Common NMEA interface for external GPS/NAV connection Tag scan and favorite channel functions Dual/tri-watch function for monitoring CH16 and/or call channel Priority scan function Display and keypad backlighting Weather channel with weather alert 3-digit or 4-digit channel display selectable The M330 series gives you the same performance and feature set as the M324 series, but now within a smaller package to fit in tight spaces. Priced at a great value the M330 series still includes the exclusive AquaQuake™ draining feature, 25 watts of power, IPX7 Waterproof rating, scan/select scan and Icom’s exclusive user interface for ease of use.The M330’s small size makes it easy to install into vessels with limited space. The dot-matrix display is clear and easy to read. A combination of the directional keypad and soft keys provides simple, smooth operation. Most used functions are assigned to soft keys for quick one push function access.Specifications Usable channels USA, CAN, INT, WX channels Current drain (at 13.8V DC) Tx 25W output - 5A Rx AF max. - 1A Operating temperature range -20°C to +60°C; -4°F to +140°F Output power (at 13.8V DC) 25W/1W Dimensions 6.2 2.6 4.3 in What's in the Box: M330 White Microphone Power Cable Mounting Bracket kit
$206.28
-
Icom Icom M330 Black VHF
Icom M330 Black 25 Watt VHFModel: IC-M330 BLACK AquaQuake™ draining function Built-in Class D DSC with a CH70 dedicated receiver Common NMEA interface for external GPS/NAV connection Tag scan and favorite channel functions Dual/tri-watch function for monitoring CH16 and/or call channel Priority scan function Display and keypad backlighting Weather channel with weather alert 3-digit or 4-digit channel display selectable The M330 series gives you the same performance and feature set as the M324 series, but now within a smaller package to fit in tight spaces. Priced at a great value the M330 series still includes the exclusive AquaQuake™ draining feature, 25 watts of power, IPX7 Waterproof rating, scan/select scan and Icom’s exclusive user interface for ease of use.The M330’s small size makes it easy to install into vessels with limited space. The dot-matrix display is clear and easy to read. A combination of the directional keypad and soft keys provides simple, smooth operation. Most used functions are assigned to soft keys for quick one push function access.Specifications Usable channels USA, CAN, INT, WX channels Current drain (at 13.8V DC) Tx 25W output - 5A Rx AF max. - 1A Operating temperature range -20°C to +60°C; -4°F to +140°F Output power (at 13.8V DC) 25W/1W Dimensions 6.2 2.6 4.3 in What's in the Box: M330 Black Microphone Power Cable Mounting Bracket kit
$206.28
-
Icom Icom M37 Hand Held VHF 6 Watt Floating
Icom M37 Hand Held VHF 6 Watt FloatingModel: M37 31 USA Float’n Flash function 700mW audio output Low battery alert function Dual/Tri-Watch function Instant access to channel 16 and the Call channel Weather channels with weather alert function Designed for commercial and recreational boaters, the M37 comes with 6 watts of power for further communications range. The M37 includes all the great features in the M36, plus Icom’s exclusive Float’n Flash and a larger capacity standard battery.The M37 is the perfect size and has an easy-to-grip design with large keys. A bigger LCD screen shows large channel numbers and status icons for easy readability.Icom is proud to include the channel history function in an entry level marine handheld. This feature stores the last five channels used for easy recall at the press of a single button.Specifications Frequency Range Tx 156.025—157.425 MHz Rx 156.050—163.275 MHz Usable channels INT, USA, CAN, WX channels Current drain (at 7.4V DC) Tx (6.0 W/1.0 W output) 2.75 A/1.0 A Rx (Max. audio. Inter SP/Exter SP) 0.4 A/0.2 A Operating temperature range -20°C to +60°C; -4°F to +140°F Antenna Impedance 50? (Projections not included) 2.4 5.5 1.5 in (with BP-296) Weight (approx.) 293 g, 10.3 oz (with BP-296, antenna and belt clip) Output power (Hi/Low) 6W (High),1W (Low) Max. frequency deviation ± 5 kHz Frequency stability ±10 ppm Spurious emissions —68d Bc typical Sensitivity (at 12dB SINAD) 6W (High),1W (Low) Max. frequency deviation ± 5 kHz Frequency stability ±10 ppm Spurious emissions —68d Bc typical Sensitivity (at 12dB SINAD) 0.25 µV typical Squelch sensitivity (Threshold) 0.25 µV typical Adjacent Channel Selectivity 70dB typical Spurious response 70dB typical Intermodulation 70dB typical Hum and noise 40dB typical Audio output power (at 10% distortion) Internal speaker 0.7 W typical (8 ? load) External speaker 0.3 W typical (8 ? load) Ingress Protection Standard Water IP57 dust protection and waterproof protection (1 m depth of water for 30 minutes) Dimensions 59.7 140.5 38.7 mm What's in the Box: M37 Radio BP-296 battery pack BC-217SA/SE* AC adapter MB-133 belt clip BC-235 desktop charger FA-SC59V antenna Hand strap
$199.95
-
Icom Icom HM184UL 14-Pin Waterproof Speaker Mic, High Volume Intrinsically Safe
Icom HM184UL 14-Pin Waterproof Speaker Mic, High Volume Intrinsically safeModel: HM184ULIntrinsically safe speaker microphone for M85UL/IS and F52/F62UL/IS
$174.69
-
Icom Icom HM135N Replacement Microphone for M802
Icom HM135N MicrophoneModel: HM135NThe HM135N is a replacement microphone for the M802 SSB.
$161.69
-
$161.69
-
Icom Icom OPC-566 Control Cable
Icom OPC-566 Control CableModel: OPC-566 Icom OPC-566 Power Cable 30' shielded control cable ICOM OPC-566 INTERCONN AT-130 TO M710
$146.25
-
Icom Icom UT112 32 Code Scrambler
Icom UT112 Scrambler Model: UT112 Digital voice scrambling unit - 32 Codes
$138.94
-
$134.06
-
Icom Icom M25 Floating Handheld VHF Black 5 Watts
Icom M25 Floating Handheld VHF Black AccentsModel: M25 Black 41 USA Float’n Flash™ - The IC-M25 floats and lets you know where it is with the flashing red LED light and LCD/key backlight. 11 Hours long battery Life - The built-in 1500mAh lithium-ion battery allows 11 hours (approx.) of long operation.* USB charging (Micro-B USB type) - A standard USB connector (Micro-B type) is used for charging the IC-M25. Cigarette lighter cables or mobile batteries for charging smartphones or other devices can be used with the IC-M25*. - *The IC-M25 accepts 5V/1A (Max.) input. Use of third-party products is not guaranteed. AquaQuake™ draining function - When water is in the speaker grill, Icom’s unique AquaQuake™ emits a buzzing sound and sheds water from the speaker. This function assures clear sharp sound at all times. Slim body and lightweigh -The 7.76-ounce (220g) lightweight and 1.2 inch (30.5mm) slim body is the new benchmark for floating marine transceivers. Large LCD, simple user interface - The IC-M25’s LCD is 30% larger than the IC-M24’s and clearly shows large channel number and status icons. The buttons on the front panel are well laid out and provide simple and straightforward operation. 550mW audio output - The IC-M25 provides a powerful 550mW audio output and received voice can be heard loud and clear. By holding the VOL/SQL button with up button, the volume is instantly turned up to the maximum level. Optional speaker microphone - The optional waterproof speaker microphone, HM-213, provides commercial grade convenience while mounting the radio around the waist. IPX7 waterproof construction (1m depth of water for 30 minutes) 4-step battery life indicator Weather channel with weather alert (USA version only) Dual/Tri-watch functions Instant access to Channel 16 or programmable call channel Favorite channel function Monitor function opens noise squelch Auto scan function LCD auto backlighting Icom pioneered the floating VHF marine radio and others followed. Setting a new trend with the IC-M24 and now the IC-M25. The IC-M25 has a flashing light feature that activates when the radio hits water, even if the power is off! If you drop this floating radio overboard, it's easier to find than ever, day or night.*Typical operation with Tx (Hi: Rx: standby = 5:5:90)Specifications General Frequency TX- 156.025—157.425MHz RX - 156.050—163.275MHz Useable Channels INT, USA, CAN, WX channels Current Drain TX - 2.3ARX - 300ma/200MA typ Operating Temperature -20°C to +60°C; -4°F to +140°F Antenna Impedance 50 Ohm Transmitter Output power 5W (High),1W (Low) Maximum frequency deviation ±5.0kHz Frequency stability ±10ppm Spurious emissions -68dBc typical Adjacent channel power 70dB Audio harmonic distortion 10% (at 60% dev.) Residual Modulation 40dB Receiver Adjacent Channel Selectivity 70dB typical Spurious response 70dB typical Intermodulation response 70dB typical Hum and noise ratio 40dB typical Audio output power (at 10% distortion, 8 ohm) Internal SP: 550mW typ. (12ohm load) External SP: 300mW typ. (4ohm load) Dimensions 2.23" W x 5.28" H x 1.2" D What's in the Box: M25 Black Radio Battery USB charger, BC-217SA Belt Clip, MB-133 Antenna, FA-SC59V Hand Strap
$131.26
You have seen 48 out of 118 products