FREE SHIPPING ON ORDERS OVER $100.0 Dollars!

  • Sale -$2.02 STA-BIL Pump Protector - 4oz [22007]

    STA-BIL STA-BIL Pump Protector - 4oz [22007]

    Pump Protector - 4ozEver get your pressure washer out in the spring, fire it up, and you see water leaking from the bottom of the pump with no water pressure? This is due to seals going bad because of no lubrication, or in cold climates, water in the pump during the winter freezes and causes the cast pump to crack. STA-BIL Pressure Washer Pump Protector is quick and easy to use year-round to keep everything working properly inside your pressure washer. This product is great for protecting pressure washer pumps during storage as well as keeping pistons and seals fresh during the season for easy trouble-free startups. It is simple to use and takes seconds to protect your investment. The next-generation anti-freeze and lubricant will protect your pressure washer pumps 24/7. Screw the pump protector onto the water hose inlet of the pressure washer, with the pressure washer wand disconnected. Push down on the STA-BIL Pressure Washer Pump Protector trigger and hold until you see foam come out the side the wand connects onto. Your pressure washer is now lubricated and any standing water has been pushed out.Features: Protects Pressure Washer Pumps During Storage Protects Pistons and Seals From Damage Can Safely Be Drained Next Generation Anti-Freeze and Lubricant Formula Coats and Protects Components Of Pressure Washer To Prevent Freezing Helps Prevent Harmful Buildup Of Hard Water Mineral Deposits

    Read more

    $8.99 $6.97

  • Sale -$30.99 SEEKR by Caframo Bora 748 24V 3-Speed 6" Marine Fan - Black [748CA24BBX]

    SEEKR by Caframo SEEKR by Caframo Bora 748 24V 3-Speed 6" Marine Fan - Black [748CA24BBX]

    Bora 748 24V 3-Speed 6" Marine Fan - BlackOutlasts and outperforms the competition. Superior airflow can provide any area with cool comfort. Three-speed touch control.The quietest and most powerful marine fan in its class! The model 748 Bora 24 Volt fan is ideal for sleeping areas, main salons, cockpits, or the galley. The Bora features a long-life motor with center push control, as well as grills on the front and back and a built-in handle for easy up/down or side-to-side positioning. Features: Three-speed touch control Long-life 5000+ hour motor Compact design Newly designed high-efficiency blade Fully guarded on front and back Locking cam mount Low power draw Made in Canada Benefits: Maximum airflow with minimum noise Match fan speed to the application Greater boater safety Easy to install Matches any boat interior Fan stays in place in rough seas Battery friendly Mounts sideways, upright or downwards Owner's Manual (pdf)Brochure (pdf)

    Read more

    $124.99 $94.00

  • Sale -$46.30 SmartPlug RV Kit 30 AMP Dual Configuration Cordset Black Inlet Combo - 30 [R30303BM30PB] SmartPlug RV Kit 30 AMP Dual Configuration Cordset Black Inlet Combo - 30 [R30303BM30PB]

    SmartPlug SmartPlug RV Kit 30 AMP Dual Configuration Cordset Black Inlet Combo - 30 [R30303BM30PB]

    RV Kit 30 AMP Dual Configuration Cordset and Black Inlet Combo - 30'People discovering the joys of RVing are often unaware of the dangers lurking in their outdated, Twist-type park power connections.  Today's RVs have enormous electrical draws. Microwaves, TVs, in-floor heating and slide-out systems are conveniences that weren't even invented when the L-style pin system was introduced in the 1930s.These Pigtail Adapters have an asymmetrical design with locking, multi-point stainless steel side clips for simple one-handed operation.  These Pigtail Adapters are designed for extreme weather conditions. The 30 AMP 125 V RV cordset provides a weather resistant power cord solution for park power. The cordset comes with the SmartPlug connector for the RV side and the industry standard three pin connector for the park power side.  It comes standard with a cool blue LED Power indicator on the female connector, a special coating that makes it more flexible and easy to roll up.Features: Eliminates Overheating – Increased pin and clip surface area greatly improves electrical conductivity during high amperage demand. Ease of Use – No twist required, the unique plug body shape and push-in design means it only goes in the right way every time – even in the dark. Multi-Point Locking System – Side clips and inlet cover lock the plug body securely into the inlet which eliminates any stress on the electrical components by movement of the power cord. Weather Resistant Seals – Multi-fin silicone gaskets installed in the plug body eliminate any water penetration when plug is connected to inlet. Quick and Easy Installation – Inlet mounting flange holes match existing inlet holes for an installation that is typically finished in 30 minutes. Technical Specifications: Length - 30' Cordeset Color - Black Inlet Color - Black Vehicle Side Connection - 30 AMP/125 V SmartPlug Park Side Connection - 30 AMP/125 V Push Type Plug In the Box: 30' Cordset Inlet cover Instruction manual *Sold as an IndividualWARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Power Cords Box Dimensions: 6"H x 13"W x 13"L WT: 10.55 lbs UPC: 682500440601 Owner's Manual (pdf)Brochure (pdf)

    Read more

    $463.00 $416.70

  • Sale -$63.50 SmartPlug RV 50 AMP Dual Configuration Cordset - 30 [R50304]

    SmartPlug SmartPlug RV 50 AMP Dual Configuration Cordset - 30 [R50304]

    RV 50 AMP Dual Configuration Cordset - 30'People discovering the joys of RVing are often unaware of the dangers lurking in their outdated, Twist-type park power connections.  Today's RVs have enormous electrical draws. Microwaves, TVs, in-floor heating and slide-out systems are conveniences that weren't even invented when the L-style pin system was introduced in the 1930s.These Pigtail Adapters have an asymmetrical design with locking, multi-point stainless steel side clips for simple one-handed operation.  These Pigtail Adapters are designed for extreme weather conditions. The 50 AMP 125V/250 V  RV cordset provides a weather resistant power cord solution for park power.  The cordset comes with the SmartPlug connector for the RV side and the industry standard three pin connector for the park power side.  It comes standard with a cool blue LED Power indicator on the female connector, a special coating that makes it more flexible and easy to roll up.Features: Eliminates Overheating – Increased pin and clip surface area greatly improves electrical conductivity during high amperage demand. Ease of Use – No twist required, the unique plug body shape and push-in design means it only goes in the right way every time – even in the dark. Multi-Point Locking System – Side clips and inlet cover lock the plug body securely into the inlet which eliminates any stress on the electrical components by movement of the power cord. Weather Resistant Seals – Multi-fin silicone gaskets installed in the plug body eliminate any water penetration when plug is connected to inlet. Quick and Easy Installation  Technical Specifications: Length - 30' Cordeset Color - Black Vehicle Side Connection - 50 AMP 125/250 V SmartPlug Park Side Connection - 50 AMP 125/250 V Push Type Plug In the Box: 30' Cordset Instruction manual *Sold as an IndividualWARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Power Cords Box Dimensions: 6"H x 15"W x 16"L WT: 22.7 lbs UPC: 682500440113 Owner's Manual (pdf)Brochure (pdf)

    Read more

    $635.00 $571.50

  • Sale -$4.96 Forespar Lanocote Rust Corrosion Solution - 4 oz. [770001]

    Forespar Performance Products Forespar Lanocote Rust Corrosion Solution - 4 oz. [770001]

    Lanocote Rust & Corrosion Solution - 4 oz. LanoCote works on these five basic principles: displaces water, absorbs corrosion, forms moisture barrier, penetrates and high lubricity. LanoCote is extremely effective in preventing and stopping corrosion on all types of metals under all environmental conditions. Formulated to withstand salt water marine conditions, LanoCote is particularly useful in preventing thread seizure due to all types of corrosion on boats and machinery.Applied during assembly, LanoCote will greatly assist in easy dismantling years later. An example would be anchor shackles which are regularly immersed in salt water. LanoCote also combats galvanization where dissimilar metals are fastened together, such as stainless steel fittings on alloy masts etc. Features: Prevents Thread Freeze-up Combats Galvanic Reaction of Dissimilar Metals Seals Porous Surfaces Neutralizes Acids, Alkalies, & Salts Prevents Corrosion on Electronic Contacts Specifications: Type: Corrosion Protection Box Dimensions: 3"H x 3"W x 3"L WT: 0.3 lbs UPC: 028026136244

    Read more

    $16.95 $11.99

  • Sale -$71.00 Flojet Quiet Quad Water System Pump - 115VAC [04406043A]

    Flojet Flojet Quiet Quad Water System Pump - 115VAC [04406043A]

    Quiet Quad Water System Pump - 115VACFeatures: Intermittent duty Self-primes up to 2.4m vertical lift The four-piston design delivers higher flow rates Quick-connect plug-in ports for easy installation Pressure-switch control to run the pump only as needed Specifications: Voltage: 115 (VAC) Flow Rate: 3.3 US Gallons/Min (12.5 Litres/Min) Pressure Switch Setting: 22psi (1.5 bar) Cut In, 35psi (2.4 bar) Cut Out Amp Draw: 0.4 (amp) Port Type: 1/2" Hose & 1/2" Thread included Bypass: Included WARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

    Read more

    $264.99 $193.99

  • Sale -$143.50 Samlex 400A Inverter Installation Kit f/3500W Inverter [DC-3500-KIT]

    Samlex America Samlex 400A Inverter Installation Kit f/3500W Inverter [DC-3500-KIT]

    400A Inverter Installation Kit f/3500W InverterSamlex’s Inverter Installation Kit contains a pair of heavy duty cables and a fuse assembly that is used to connect the inverter to the battery bank. The fuse protects your equipment in the event of a battery short-circuit and the cables provide a safe and easy plug and play connection.Specifications:Input: 2500-3500 Watts / 5000-7000 WattsOutput: 12 V / 24 VAmps: 400 AmpsFuse: 400 AmpsWeight: 17.5 (lbs)Weight: 7.93 (kg)Dimensions: *comes with 10ft of cable x 2Warranty: 2 Year LimitedApplications:The fuse protects your equipment in the event of a battery short-circuit and the cables provide a safe and easy plug and play connection.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Owner's Manual (pdf)Brochure (pdf)

    Read more

    $717.30 $573.80

  • Sale -$10.99 SEEKR by Caframo Ultimate 747 12V 2-Speed 7" Fan w/Lighter Plug - White [747DCWCS]

    SEEKR by Caframo SEEKR by Caframo Ultimate 747 12V 2-Speed 7" Fan w/Lighter Plug - White [747DCWCS]

    Ultimate 747 12V 2-Speed 7" Fan with Lighter Plug - WhiteCaframo's most popular marine fan. FingerSafe blade allows for maximum airflow. Two-speed options.Industry recognized and a long-time favorite of sailors! The model 747 Ultimate 12 Volt DC fan is recognized by Practical Sailor magazine as a "Best Buy" in the marine market. It features a Fingersafe blade that does not require a protective grill and has a shock-absorbing leading edge that flexes when it is stopped. The resulting maximum airflow makes the 747 Ultimate the top choice for sailors heading to hot, humid climates.Features: Two speeds Comes with two mounting options (permanent or removable suction cup) 12 Volt lighter plug included Long life, low power drawing motor Adjustable base and tilting head Benefits: Maximum airflow Easy to clean Easy to install Quiet, dependable operation Direct air in any direction Match any boat interior The fan stays in place in rough seas Owner's Manual (pdf)Brochure (pdf)

    Read more

    $74.99 $64.00

  • Sale -$23.00 TACO Flexible Vinyl Trim - 3/8" Opening x "W x 25'L - White [V30-1312W25-1]

    TACO Marine TACO Flexible Vinyl Trim - 3/8" Opening x "W x 25'L - White [V30-1312W25-1]

    Flex TrimLength: 25'"A": 3/8""B": 5/8"Color: WhiteTACO Metals supplies quality trim that is designed to protect boat interiors and exteriors from the harsh marine environment.Trim & MouldingTrim and moulding products provide finish, protection and structural integrity. TACO trim and moulding products are the best in the industry and are used extensively throughout boat interiors and exteriors.MaterialsDepending on the product line, TACO's trim and moulding products are offered in aluminum, vinyl and specially formulated rubber compounds. TACO insists on using prime billet 6000 series aluminum alloys to ensure superior structural strength, precise bending and long-lasting performance. Vinyl and plastic products are made from prime resin and warranted for 5 years. Covers unfinished edges and follows almost any contour or radius Made of flexible PVC Integrated interior aluminum clip and gripping tongue ensures a better fit This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

    Read more

    $94.99 $71.99

  • Sale -$41.68 Hella Marine 2-Speed Turbo Fan - 24V - Black [003361012]

    Hella Marine Hella Marine 2-Speed Turbo Fan - 24V - Black [003361012]

    2-Speed Turbo Fan - 24V - BlackUniversal fans from the versatile and well respected “Turbo” range.Can be turned and pivoted in all directions, and locked in position.Features: 150mm diameter fan blade with guard High air moving capacity with low power consumption Two speed switch in front of the blade guard Side, upright or pendant mounting Quality German motor provides very quiet operation  Specifications: Material Description: Impact resistant plastic Switch: Integrated 2 stage rotary Output / Speed 1: 70L / sec. Output / Speed 2: 95L / sec. Power Consumption: 6.5W Installation: Pre-wired with 140mm of cable

    Read more

    $126.67 $84.99

  • Sale -$11.46 Forespar Lanocote Rust Corrosion Solution - 16 oz. [770003]

    Forespar Performance Products Forespar Lanocote Rust Corrosion Solution - 16 oz. [770003]

    Lanocote Rust & Corrosion Solution - 16 oz. LanoCote works on these five basic principles: displaces water, absorbs corrosion, forms moisture barrier, penetrates and high lubricity. LanoCote is extremely effective in preventing and stopping corrosion on all types of metals under all environmental conditions. Formulated to withstand salt water marine conditions, LanoCote is particularly useful in preventing thread seizure due to all types of corrosion on boats and machinery.Applied during assembly, LanoCote will greatly assist in easy dismantling years later. An example would be anchor shackles which are regularly immersed in salt water. LanoCote also combats galvanization where dissimilar metals are fastened together, such as stainless steel fittings on alloy masts etc. Features: Prevents Thread Freeze-up Combats Galvanic Reaction of Dissimilar Metals Seals Porous Surfaces Neutralizes Acids, Alkalies, & Salts Prevents Corrosion on Electronic Contacts Specifications: Type: Corrosion Protection Box Dimensions: 4"H x 4"W x 4"L WT: 0.95 lbs UPC: 028026136268

    Read more

    $36.45 $24.99

  • Sale -$30.99 SEEKR by Caframo Bora 748 24V 3-Speed 6" Marine Fan - White [748CA24WBX]

    SEEKR by Caframo SEEKR by Caframo Bora 748 24V 3-Speed 6" Marine Fan - White [748CA24WBX]

    Bora 748 24V 3-Speed 6" Marine Fan - WhiteOutlasts and outperforms the competition. Superior airflow can provide any area with cool comfort. Three-speed touch control.The quietest and most powerful marine fan in its class! The model 748 Bora 24 Volt fan is ideal for sleeping areas, main salons, cockpits, or the galley. The Bora features a long-life motor with center push control, as well as grills on the front and back and a built-in handle for easy up/down or side-to-side positioning. Features: Three-speed touch control Long-life 5000+ motor Compact design Newly designed high-efficiency blade Fully guarded on front and back Locking cam mount Low power draw Made in Canada Benefits: Maximum airflow with minimum noise Match fan speed to the application Greater boater safety Easy to install Matches any boat interior Fan stays in place in rough seas Battery friendly Mounts sideways, upright or downwards Owner's Manual (pdf)Brochure (pdf)

    Read more

    $124.99 $94.00

  • Sale -$13.00 SEEKR by Caframo Chinook 707 120V AC 2-Speed 7" Fan - Black [707CHBBX]

    SEEKR by Caframo SEEKR by Caframo Chinook 707 120V AC 2-Speed 7" Fan - Black [707CHBBX]

    Chinook 707 120V AC 2-Speed 7" Fan - BlackEveryone's favorite fan. Moves air up to 250 CFM.The most versatile AC fan a boater can have on board! The model 707 Chinook's combination of quality and performance has made it our best-selling fan for more than 20 years. You'll be amazed at how much air this fan moves and its small size makes it easy to move anywhere on the boat.Features: Powerful 2-speed motor Stands only 8.5" high 6' AC Power Cord Anti-slip rubber feet Finger safe blade requires no grilling CSA approved 2-year warranty Made in Canada Benefits: Superior airflow Whisper quiet Takes up very little counter space Storable when not in use Very stable and stays in place Easy to clean Safe Years of trouble free use Owner's Manual (pdf)Brochure (pdf)

    Read more

    $49.99 $36.99

  • Sale -$13.00 SEEKR by Caframo Chinook 707 120V AC 2-Speed 7" Fan - White [707CHWBX]

    SEEKR by Caframo SEEKR by Caframo Chinook 707 120V AC 2-Speed 7" Fan - White [707CHWBX]

    Chinook 707 120V AC 2-Speed 7" Fan - WhiteEveryone's favorite fan. Moves air up to 250 CFM.The most versatile AC fan a boater can have on board! The model 707 Chinook's combination of quality and performance has made it our best-selling fan for more than 20 years. You'll be amazed at how much air this fan moves and its small size makes it easy to move anywhere on the boat.Features: Powerful 2-speed motor Stands only 8.5" high 6' AC Power Cord Anti-slip rubber feet Finger safe blade requires no grilling CSA approved 2-year warranty Made in Canada Benefits: Superior airflow Whisper quiet Takes up very little counter space Storable when not in use Very stable and stays in place Easy to clean Safe Years of trouble free use Owner's Manual (pdf)Brochure (pdf)

    Read more

    $49.99 $36.99

  • Sale -$31.00 iN-Command Tire Pressure Monitoring System - 2 Sensor Package [NCTP1002]

    iN-Command Control Systems iN-Command Tire Pressure Monitoring System - 2 Sensor Package [NCTP1002]

    Tire Pressure Monitoring System - 2 Sensor PackageMonitor the air pressure and temperature of up to 22 tires in real-time with the iN•Command® Tire Pressure Monitoring System. The waterproof sensors use Bluetooth technology to communicate important safety information right to your smart device with the iN•Command TPMS App. Just open the Apple or Android App to assign a sensor to each tire by scanning the QR code with your device's camera to receive audible alerts.Features: Works with RVs, Trailers, Passenger Vehicles, and More Each Tire can be Monitored Individually for Pressure and Temperature (F° or C°)  Ability to Monitor up to 22 Tires at Once w/ the iN-Command app Lets you Access Tire Pressure and Temperature History Free App is Available on Android and Apple Smartphones Pressure monitoring range: 0 to 185 PSI In the Box: Two (2) Bluetooth-Enabled Tire Pressure Monitoring Sensors w/ Locking Anti-Theft Bolts Two (2) 3V - CR1632 Batteries  Installation Wrench Instruction Manual *Sold as an Individual  Specifications: Type: Parts Box Dimensions: 3"H x 6"W x 7"L WT: 0.4 lbs UPC: 681787022968 Brochure (pdf)

    Read more

    $128.99 $97.99

  • Sale -$46.30 SmartPlug RV Kit 30 AMP Dual Configuration Cordset Grey Inlet Combo - 30 [R30303BM30PG] SmartPlug RV Kit 30 AMP Dual Configuration Cordset Grey Inlet Combo - 30 [R30303BM30PG]

    SmartPlug SmartPlug RV Kit 30 AMP Dual Configuration Cordset Grey Inlet Combo - 30 [R30303BM30PG]

    RV Kit 30 AMP Dual Configuration Cordset and Grey Inlet Combo - 30'People discovering the joys of RVing are often unaware of the dangers lurking in their outdated, Twist-type park power connections.  Today's RVs have enormous electrical draws. Microwaves, TVs, in-floor heating and slide-out systems are conveniences that weren't even invented when the L-style pin system was introduced in the 1930s.These Pigtail Adapters have an asymmetrical design with locking, multi-point stainless steel side clips for simple one-handed operation.  These Pigtail Adapters are designed for extreme weather conditions. The 30 AMP 125 V RV cordset provides a weather resistant power cord solution for park power. The cordset comes with the SmartPlug connector for the RV side and the industry standard three pin connector for the park power side.  It comes standard with a cool blue LED Power indicator on the female connector, a special coating that makes it more flexible and easy to roll up.Features: Eliminates Overheating – Increased pin and clip surface area greatly improves electrical conductivity during high amperage demand. Ease of Use – No twist required, the unique plug body shape and push-in design means it only goes in the right way every time – even in the dark. Multi-Point Locking System – Side clips and inlet cover lock the plug body securely into the inlet which eliminates any stress on the electrical components by movement of the power cord. Weather Resistant Seals – Multi-fin silicone gaskets installed in the plug body eliminate any water penetration when plug is connected to inlet. Quick and Easy Installation – Inlet mounting flange holes match existing inlet holes for an installation that is typically finished in 30 minutes. Technical Specifications: Length - 30' Cordeset Color - Black Inlet Color - Grey Vehicle Side Connection - 30 AMP/125 V SmartPlug Park Side Connection - 30 AMP/125 V Push Type Plug In the Box: 30' Cordset Inlet cover Instruction manual *Sold as an IndividualWARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Power Cords Box Dimensions: 7"H x 13"W x 13"L WT: 10.7 lbs UPC: 682500440595 Owner's Manual (pdf)Brochure (pdf)

    Read more

    $463.00 $416.70

  • Sale -$20.00 SEEKR by Caframo Stor-Dry 9406 110V Warm Air Circulator Dehumidifier - 75W [9406CAABX]

    SEEKR by Caframo SEEKR by Caframo Stor-Dry 9406 110V Warm Air Circulator Dehumidifier - 75W [9406CAABX]

    Stor-Dry 9406 110V Warm Air Circulator & Dehumidifier - 75WLow wattage warm air circulator. Prevents mold and mildew. Great for boat storage.The Stor-Dry low wattage warm air circulator is the "must-have" product for the winterization season. The model 9406 Stor-Dry combats mold, mildew, and musty odors in any boat that is closed up or winterized. This dual-action air dryer uses a low-wattage heating element and internal fan to both heat and circulates the air. The heat and circulation prevent stale air pockets which in turn prevent mold or mildew from forming on the interior surface of the boat.Features: Dual-action of fan and heating element Low power consumption of 90 watts Raises the ambient temperature above the dew point Corrosion-resistant aluminum Rugged construction Made in Canada 2-year warranty Benefits: Superior performance overheating element only products No maintenance required Effective in areas up to 1000 cubic feet Controls mold and mildew Ready to use out of the box Odor free boats Years of trouble free use Owner's Manual (pdf)Brochure (pdf)

    Read more

    $119.99 $99.99

  • Sale -$2.00 Camco RV Fridge Door Block [44105] Camco RV Fridge Door Block [44105]

    Camco Camco RV Fridge Door Block [44105]

    RV Fridge Door BlockThe Camco Fridge Door Block holds a fridge and freezer door open during storage to promote airflow and prevent mildew and odors, and it also prevents the door from swinging open if the RV or trailer is uneven.The unique drawstring design adjusts to accommodate doors thick and thin. A high-strength neodymium magnet attaches to the inside of the fridge to hold the block in place, and the drawstring can tighten to the thickness of the door, holding the door open but preventing it from opening further. When users are not using the Fridge Door Block, it can be placed outside of the refrigerator, so it doesn't become lost.Features: Hold the fridge and freezer door open during storage to promote ventilation and help prevent mildew growth A high-strength neodymium magnet holds the block in place, preventing the door from swinging open Drawstring adjustment accommodates thick or thin doors Keep the block as a magnet on a fridge when not in use so users don’t lose it during the camping season Also accommodates single-door refrigerators

    Read more

    $9.99 $7.99

  • Sale -$51.90 SmartPlug RV Kit 30 AMP Dual Configuration Cordset Stainless Steel Inlet Combo - 30 [R30303BM30NT] SmartPlug RV Kit 30 AMP Dual Configuration Cordset Stainless Steel Inlet Combo - 30 [R30303BM30NT]

    SmartPlug SmartPlug RV Kit 30 AMP Dual Configuration Cordset Stainless Steel Inlet Combo - 30 [R30303BM30NT]

    RV Kit 30 AMP Dual Configuration Cordset and Stainless Steel Inlet Combo - 30'People discovering the joys of RVing are often unaware of the dangers lurking in their outdated, Twist-type park power connections.  Today's RVs have enormous electrical draws. Microwaves, TVs, in-floor heating and slide-out systems are conveniences that weren't even invented when the L-style pin system was introduced in the 1930s.These Pigtail Adapters have an asymmetrical design with locking, multi-point stainless steel side clips for simple one-handed operation.  These Pigtail Adapters are designed for extreme weather conditions. The 30 AMP 125 V RV cordset provides a weather resistant power cord solution for park power. The cordset comes with the SmartPlug connector for the RV side and the industry standard three pin connector for the park power side.  It comes standard with a cool blue LED Power indicator on the female connector, a special coating that makes it more flexible and easy to roll up.Features: Eliminates Overheating – Increased pin and clip surface area greatly improves electrical conductivity during high amperage demand. Ease of Use – No twist required, the unique plug body shape and push-in design means it only goes in the right way every time – even in the dark. Multi-Point Locking System – Side clips and inlet cover lock the plug body securely into the inlet which eliminates any stress on the electrical components by movement of the power cord. Weather Resistant Seals – Multi-fin silicone gaskets installed in the plug body eliminate any water penetration when plug is connected to inlet. Quick and Easy Installation – Inlet mounting flange holes match existing inlet holes for an installation that is typically finished in 30 minutes. Technical Specifications: Length - 30' Cordeset Color - Black Inlet Color - Stainless Steel Vehicle Side Connection - 30 AMP/125 V SmartPlug Park Side Connection - 30 AMP/125 V Push Type Plug In the Box: 30' Cordset Inlet cover Instruction manual *Sold as an IndividualWARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Power Cords Box Dimensions: 5"H x 13"W x 14"L WT: 11.4 lbs UPC: 682500440571 Owner's Manual (pdf)Brochure (pdf)

    Read more

    $519.00 $467.10

  • Sale -$21.00 Camco Retractable Tie Down Straps - 2" Width 5.5 Bolt On [50030] Camco Retractable Tie Down Straps - 2" Width 5.5 Bolt On [50030]

    Camco Camco Retractable Tie Down Straps - 2" Width 5.5 Bolt On [50030]

    Retractable Tie Down Straps - 2" Width 5.5' Bolt OnUse Camco Retractable Transom Tie Down Straps to safely secure your boat when traveling. The bolt-on design mounts directly to your trailer and the retractable straps have an easy ratcheting mechanism. Features: Safely secure your boat when traveling Bolt-on design mounts directly to your trailer Retractable straps with easy ratcheting mechanism Durable, corrosion resistant materials 2" x 5.5' - 2,500 lb. break strength, 833 lb. working strength Specifications: Length (Feet): 5.5' Diameter (Inches): 2" Box Dimensions: 4"H x 8"W x 10"L WT: 5.35 lbs UPC: 014717500302

    Read more

    $59.99 $38.99

  • Sale -$22.00 Camco Retractable Tie Down Straps - 2" Width 6 Dual Hooks [50031] Camco Retractable Tie Down Straps - 2" Width 6 Dual Hooks [50031]

    Camco Camco Retractable Tie Down Straps - 2" Width 6 Dual Hooks [50031]

    Retractable Tie Down Straps - 2" Width 6' Dual HooksUse Camco retractable Transom tie down straps to safely secure your boat when traveling. Has easy to use hooks on each end and the retractable straps have an easy ratcheting mechanism. High quality maximum strength tie down straps will support and safely secure boats, motorcycles, atvs, furniture, cargo, equipment, machinery and much more with 2,500 lb break strength and 833 lb working strength. Specifications: Diameter (Inches): 2" Length (Feet): 6' Box Dimensions: 3"H x 9"W x 10"L WT: 5.8 lbs UPC: 014717500319

    Read more

    $62.99 $40.99

  • Sale -$7.46 Forespar Lanocote Rust Corrosion Solution - 7 oz. [770002]

    Forespar Performance Products Forespar Lanocote Rust Corrosion Solution - 7 oz. [770002]

    Lanocote Rust & Corrosion Solution - 7 oz. LanoCote works on these five basic principles: displaces water, absorbs corrosion, forms moisture barrier, penetrates and high lubricity. LanoCote is extremely effective in preventing and stopping corrosion on all types of metals under all environmental conditions. Formulated to withstand salt water marine conditions, LanoCote is particularly useful in preventing thread seizure due to all types of corrosion on boats and machinery.Applied during assembly, LanoCote will greatly assist in easy dismantling years later. An example would be anchor shackles which are regularly immersed in salt water. LanoCote also combats galvanization where dissimilar metals are fastened together, such as stainless steel fittings on alloy masts etc. Features: Prevents Thread Freeze-up Combats Galvanic Reaction of Dissimilar Metals Seals Porous Surfaces Neutralizes Acids, Alkalies, & Salts Prevents Corrosion on Electronic Contacts This product is flammable.  Specifications: Type: Corrosion Protection Box Dimensions: 2"H x 2"W x 8"L WT: 0.6 lbs UPC: 028026191090

    Read more

    $24.45 $16.99

  • Sale -$5.96 Forespar Marelube TEF45 30cc Syringe [770066]

    Forespar Performance Products Forespar Marelube TEF45 30cc Syringe [770066]

    Marelube TEF45 30cc SyringeA highly water-resistant synthetic lubricant grease containing 45% PTFE, the highest PTFE available. Perfect for heavy loads and bi-metal anti-corrosion applications. Also works well at protecting against rust corrosion and anti-seize applications.

    Read more

    $20.95 $14.99

  • Sale -$12.00 Camco Retractable Tie-Down Straps - 1" Width 6 Dual Hooks [50033] Camco Retractable Tie-Down Straps - 1" Width 6 Dual Hooks [50033]

    Camco Camco Retractable Tie-Down Straps - 1" Width 6 Dual Hooks [50033]

    Retractable Tie-Down Straps - 1" Width 6' Dual HooksUse Camco retractable Transom tie-down straps to secure your boat when traveling safely. It has easy-to-use hooks on each end and the retractable belts have an easy ratcheting mechanism.High-quality maximum strength tie-down straps will support and safely secure boats, motorcycles, ATVs, furniture, cargo, equipment, machinery, and much more with 1,500 lb break strength and 500 lb working strength. Specifications: Length (Feet): 6' Diameter (Inches): 1" Box Dimensions: 3"H x 6"W x 10"L WT: 3 lbs UPC: 014717500333

    Read more

    $33.99 $21.99

  • Sale -$10.99 SEEKR by Caframo Ultimate 757 12V 2-Speed 7" Fan - Direct Wire - White [757DCWBX]

    SEEKR by Caframo SEEKR by Caframo Ultimate 757 12V 2-Speed 7" Fan - Direct Wire - White [757DCWBX]

    Ultimate 757 12V 2-Speed 7" Fan - Direct Wire - WhiteDirect wire only. FingerSafe blade allows for maximum airflow. Two-speed options.The 757 Ultimate 12V DC fan has long been a favorite among Caribbean sailors where good boat ventilation is a must. The two-speed motor and FingerSafe blade move large masses of air throughout the boat from the V-berth to the galley. This is the fan that will let boaters enjoy their boating investment.Features: Two speeds Direct wire Comes with a permanent mounting option Long life, low power drawing motor Adjustable base and tilting head Benefits: Maximum airflow Easy to clean Easy to install Quiet, dependable operation Direct air in any direction Match any boat interior The fan stays in place in rough seas Owner's Manual (pdf)Brochure (pdf)

    Read more

    $64.99 $54.00

  • Sale -$6.96 CURT 2" Trailer Ball - 3/4" x 1-3/4" Shank - 3,500 lb. Capacity - Chrome [40064]

    CURT CURT 2" Trailer Ball - 3/4" x 1-3/4" Shank - 3,500 lb. Capacity - Chrome [40064]

    2" Trailer Ball - 3/4" x 1-3/4" Shank - 3,500 lb. Capacity - ChromeOut of the monotony comes one name that rises above all others. CURT trailer balls are designed for strength, ease of use, and, ultimately, to get you to your destination without hassle. CURT 2" trailer hitch balls are constructed from quality steel and are made with precision to fit your 2" trailer coupler like a hand in a glove. They are able to tow most standard-duty and heavy-duty trailers, such as utility trailers, boat trailers, campers, livestock trailers, and recreational vehicle trailers for hauling ATVs, snowmobiles, personal watercraft, and more. These tow balls are an excellent extension of your class 3 or class 4 trailer hitch and ball mount and are the ideal choice for most pickup trucks and SUVs. (NOTE: Never exceed the lowest weight capacity of any towing component, i.e., the vehicle, hitch, trailer, etc.)This particular 2" trailer ball offers a ball capacity of 3,500 lbs. It features a 3/4" shank diameter, a 1-3/4" shank length, 0" of rise, and a nickel-chrome finish to protect against rust and scratches. With its fine-threaded shank, this 2" trailer ball also offers an added measure of holding strength and provides smooth installation and torquing. To give peace of mind while towing to that next destination, CURT also carefully tests the trailer balls and ensures that each one meets U.S. VESC specifications.Features: It fits 2" couplers and accepts up to 3,500 lbs. GTW Constructed from high-strength, hot-forged steel Protected by a durable chrome-plated finish Zinc-plated hex nut and helical lock washer for secure mounting Features fine threads for superior holding strength Tested for safety to meet U.S. VESC V-5 specifications Specifications: Ball Capacity: 3,500 lbs Ball Diameter: 2 in. Color: Silver Finish: Chrome-plated Hub Warehouse: D25 Material: Forged steel Shank Diameter: 3/4 in. Shank Length: 1-3/4 in. Shank Rise: 0 in. Torque: 160 ft. lb. Warranty: Limited lifetime warranty (one-year finish, one-year parts) *The mounting platform must be at least 3/8 in. thick, and the hole size must not be more than 1/16 in. larger in diameter than the threaded shank

    Read more

    $15.95 $8.99

  • Sale -$28.96 CURT Switch Ball Trailer Ball Set - 1-7/8" 2" Balls - 1-7/8" x 2-1/4" Shank [42178]

    CURT CURT Switch Ball Trailer Ball Set - 1-7/8" 2" Balls - 1-7/8" x 2-1/4" Shank [42178]

    Switch Ball Trailer Ball Set - 1-7/8" & 2" Balls - 1-7/8" x 2-1/4" ShankCURT Switch Ball trailer balls are a breakthrough in trailer ball technology. As a result of CURT innovation and engineering genius, switch balls offer the ultimate in convenience and reliability for a variety of light-duty and medium-duty towing applications. Essentially, a CURT Switch Ball is a trailer ball shank with a removable head. With its exclusive J-groove design, the switch ball trailer ball allows different heads or ball sizes to be placed on the shank to accommodate different coupler sizes. This means there is no need to switch between ball mounts or even own a second ball mount to fit an additional trailer. When you need to make the switch, simply twist the switchball head, lift it off, and twist on another. The J-groove ensures a solid hold on your trailer while still allowing for easy removal of the trailer ball without tools or pins.This CURT Switch Ball trailer ball set comes with two ball attachments. Ball 1 features a ball diameter of 1-7/8" and a ball capacity of 3,500 lbs. Ball 2 has a 2" ball diameter and a ball capacity of 6,000 lbs. The shank measures 2-1/4" long and 1" in diameter. CURT constructs these interchangeable hitch balls from premium-grade steel for strength and gives them a bright nickel-chrome finish for a long life. To ensure your safety and provide you with a tow ball you can depend on, CURT switch balls are independently tested in accordance with SAE J684.Features: Fits 1-7/8" or 2" couplers and accepts up to 6,000 lbs. GTW (depending on ball) Exclusive 'J' groove design ensures a secure system No tools, coins, or pins are required for trailer ball installation Shank bears the weight, freeing the coupler from friction and binding Constructed from high-strength steel Protected by a premium-grade nickel chrome-plated finish Zinc-plated hex nut and helical lock washer for secure mounting Independently tested in accordance with SAE J684 for safety and proven safe Specifications: Ball 1 Diameter and Capacity: 1-7/8 in. - 3,500 lb. Ball 2 Diameter and Capacity: 2 in. - 6,000 lb. Finish: Chrome Hub Warehouse: D25 Neck Diameter: 1 in. Rise: 0 in. Shank Diameter: 1 in. Shank Length: 2-1/4 in. U.S. Patent (#): 5,169,168 Canadian Patent (#): 1,325,445 Warranty: Limited lifetime warranty (one-year finish, one-year parts)

    Read more

    $69.95 $40.99

  • Sale -$16.96 CURT 16 Lime Green Cargo Straps w/"S" Hooks - 1,100 lbs - 2 Pack [83028]

    CURT CURT 16 Lime Green Cargo Straps w/"S" Hooks - 1,100 lbs - 2 Pack [83028]

    16' Lime Green Cargo Straps with "S" Hooks - 1,100 lbs - 2 PackWrapping rope around the trailer and hoping for the best is not the ideal way to secure cargo. Even using a net of bungee cords can create an unsafe scenario if just one of those bungees pops loose. Using the right method to secure the cargo is an important aspect of towing that is too often overlooked. When users need cargo security that can handle the long haul, CURT cargo straps should be used. CURT offers two different types of cargo straps in a variety of colors and lengths and with various hook types to provide a complete towing solution.These CURT ratchet tie-down straps are designed to accommodate larger, heavier loads. They are made from a high-strength, woven nylon material and come with a ratcheting buckle that allows for superior tension on the load. They feature a break strength of 3,300 lbs. and a work load limit of 1,100 lbs. These lime green cargo straps come equipped with rubber-coated S-hooks for a secure hold and strong resistance to corrosion and wear. They measure a total length of 16' and have a strap width of 1". Two ratchet straps are included in this package.Packing up a vehicle for a long trip does not have to turn into a game of Tetris. With CURT cargo management, it is easy to give yourself adequate storage room, even in the smallest cars. For that weekend getaway or trip cross-country, you can bring it all with CURT.Features: Four 16' long straps are perfect for securing cargo in trailers, truck beds and more Offers a superior tiedown method compared to bungee cords and rope Provides a work load limit of 1,100 lbs. with a break strength of 3,300 lbs. Ratchet mechanism allows for superior tension on heavy loads Straps constructed from high-strength, woven nylon S-hooks coated in rubber for rust and wear resistance Ratchets are protected by a durable yellow zinc-plated finish Specifications: Break Strength: 3,300 lb. Capacity: 1,100 lb. Color: Lime Green Hook Finish: Rubber-coated Hook Style: S-hook Hub Warehouse: D25 Part Type: Cargo strap Quantity Per package: 2 Strap Length: 16 ft. Strap Width: 1 in. Warranty: Limited lifetime warranty (one-year finish, one-year parts)

    Read more

    $36.95 $19.99

  • Sale -$104.33 CURT ActiveLink Ultra Series Bike Rack - 4 Bikes Up to 180 lbs [18412] CURT ActiveLink Ultra Series Bike Rack - 4 Bikes Up to 180 lbs [18412]

    CURT CURT ActiveLink Ultra Series Bike Rack - 4 Bikes Up to 180 lbs [18412]

    ActiveLink Ultra Series Bike Rack - 4 Bikes Up to 180 lbsThe ActiveLink Ultra bike rack is all about bringing maximum confidence and convenience to an active, outdoor lifestyle. It is built around the revolutionary ActiveLink technology from CURT, a hitch-mounted system that allows for fast, easy, and secure attachment of hitch accessories like never before. This model transports up to four bikes at once and is rated to hold up to 180 lbs.It can also be used in a two-bike configuration. Unlike a traditional hitch connection that requires users to get down on their hands and knees and feel around grimy components to line everything up, this bike rack features the ActiveLink shank. Simply install the shank once in a receiver, and users can swap out accessories in a flash. The shank features a bottom bolt that provides a resting point for the accessory attachment, perfectly lining up the hitch pin holes for an effortless connection. Drop in the bike rack whenever users need it or swap it out in a snap. It’s that easy.The ActiveLink 4-bike rack from CURT is constructed from high-strength steel and provides space to hang up to four bikes at one time. The underslung design allows the bike to easily be lifted onto the cradles from underneath with no threading needed, and the tiered, ascending configuration provides more clearance for the outer bikes. The premium cradles and rubber bumper on the vertical support tube keep the bikes secure while protecting the frames from scuffs and scratches. The rack also has a tilt-away pivot point for convenient access to a vehicle's rear cargo area, and the arms of the rack fold down as needed for compact storage. To help protect this CURT bike rack from the elements, it comes with a dual finish of A-coat and a durable black powder coat.Features: Patent-pending ActiveLink design for fast, secure attachment with pin and clip Unique connection that allows users to easily swap out accessories as needed Shank provides an integrated resting point for struggle-free installation Bikes can easily be lifted onto cradles from underneath – no threading needed Tiered ascending configuration improves clearance for outer bikes Flip-back arm allows for better accessibility when loading inner bikes Usable in 2-bike or 4-bike configuration (180 lbs. max weight capacity) Rubber bumper pad on vertical support tube to protect from scuffs and scratches Premium cradles accept various frame tube sizes Tilt-away feature for easier access to the vehicle cargo area Upper arms fold down when not in use for compact storage Anti-rattle hitch pin and plastic lining on the shank for reduced noise Integrated handle for easy removal and carrying Steel construction with dual E-coat and carbide black powder coat finish Limited lifetime warranty (one-year finish, one-year parts) Notes: Includes bike rack and shank (compatible with ActiveLink shank only) For use with any frame-mounted 2" class 3 or higher trailer hitch receiver. Clamp-on bumper receivers and traditional 4" square bumpers should not be used to mount bike racks. Do not exceed receiver weight limits. Specifications: Finish: Black Powder Coat  Hub Warehouse: D25 Installation Time (Exact): 0 Material: Carbon Steel Max Load: 180 lbs. Mount Type Description: Not applicable Number of Bikes: 4 Receiver Tube Size: 2 in. Warranty: Limited Lifetime warranty (one-year finish, one-year parts)

    Read more

    $355.32 $250.99

  • Sale -$14.96 CURT 16 Blue Cargo Straps w/"J" Hooks - 733 lbs - 2 Pack [83020]

    CURT CURT 16 Blue Cargo Straps w/"J" Hooks - 733 lbs - 2 Pack [83020]

    16' Blue Cargo Straps with "J" Hooks - 733 lbs - 2 PackWrapping rope around the trailer and hoping for the best is not the ideal way to secure cargo. Even using a net of bungee cords can create an unsafe scenario if just one of those bungees pops loose. Using the right method to secure the cargo is an important aspect of towing that is too often overlooked. When users need cargo security that can handle the long haul, CURT cargo straps should be used. CURT offers two different types of cargo straps in a variety of colors and lengths and with various hook types to provide a complete towing solution.These CURT ratchet tie-down straps are designed to accommodate larger, heavier loads. They are made from a high-strength, woven nylon material and come with a ratcheting buckle that allows for superior tension on the load. They feature a break strength of 2,200 lbs. and a work load limit of 733 lbs. These blue cargo straps come equipped with rubber-coated J-hooks for a secure hold and strong resistance to corrosion and wear. They measure a total length of 16' and have a strap width of 1". Two ratchet straps are included in this package.Packing up the vehicle for a long trip does not have to turn into a game of Tetris. With CURT cargo management, it is easy to have adequate storage room even in the smallest cars. For that weekend getaway or trip cross-country, bring it all with CURT.Features: Two 16' long straps are perfect for securing cargo in trailers, truck beds and more Offers a superior tiedown method compared to bungee cords and rope Provides a work load limit of 733 lbs. with a break strength of 2,200 lbs. Ratchet mechanism allows for superior tension on heavy loads Straps constructed from high-strength, woven nylon J-hooks coated in rubber for rust and wear resistance Ratchets are protected by a durable yellow zinc-plated finish Specifications: Break Strength: 2,200 lb. Capacity: 733 lb. Color: Blue Hook Finish: rubber-coated Hook Style: J-hook Hub Warehouse: D25 Part Type: Cargo strap Quantity Per Package: 2 Strap Length: 16 ft. Strap Width: 1 in. Warranty: Limited lifetime warranty (one-year finish, one-year parts)

    Read more

    $33.95 $18.99

  • Sale -$22.96 CURT Loaded Ball Mount w/2-5/16" Ball - 2" Shank - 2" Drop - 7,500 lbs [45041]

    CURT CURT Loaded Ball Mount w/2-5/16" Ball - 2" Shank - 2" Drop - 7,500 lbs [45041]

    Loaded Ball Mount with 2-5/16" Ball - 2" Shank - 2" Drop - 7,500 lbsWhen it comes to ball mounts, a CURT loaded ball mount is the complete package. These stingers come with all necessary towing components and are pre-fitted with a factory-torqued trailer ball, eliminating the need to mount and torque your own trailer ball. This means a loaded ball mount is ready for towing right out of the package! Each one also comes with a pin and clip for mounting the ball mount into the appropriate-size receiver tube. CURT offers loaded ball mounts in a variety of styles and weight ratings.This CURT loaded ball mount features a gross trailer weight capacity of 7,500 lbs. and a tongue weight capacity of 750 lbs. It comes with a 2-5/16" trailer ball, making it an excellent choice for towing most boat trailers, utility trailers, campers, livestock trailers, and recreational vehicle trailers used for hauling dirt bikes, motorcycles, and ATVs. (NOTE: Never exceed the lowest weight capacity of any towing component, i.e., the vehicle, hitch, trailer, etc.) This ball mount also has a length of 8-1/4", a drop of 2", and comes with a gloss black powder coat finish to resist rust, chipping, and UV damage. All CURT loaded ball mounts feature 2" x 2" shanks and are made with the same superior quality CURT puts into each of the company's products.Features: Rated at 7,500 lbs. gross trailer weight and 750 lbs. tongue weight Fits trailer hitches with a 2" x 2" receiver tube opening Factory-torqued CURT trailer ball accepts a 2-5/16" coupler 2" drop for precise trailer leveling The hollow shank weighs less and can be used with an anti-rattle kit CNC-formed, robotically welded, and mechanically descaled for a perfect fit Protected by a durable powder coat finish Trailer ball features a polished chrome-plated finish 5/8" hitch pin and clip for secure mounting in the receiver tube Assembled in the USA Specifications: Includes: 2-5/16" trailer ball #40005, pin & clip Ball Diameter: 2-5/16 in. Drop: 2 in. Finish: Gloss black powder coat Gross Trailer Weight (GTW): 7,500 LB Hub Warehouse: D25 Length: 8-1/4 in. Part Type: Loaded ball mount Receiver Tube Size: 2 in. Tongue Weight (TW): 750 lb. Warranty: Limited lifetime warranty (one-year finish, one-year parts) *Weight capacity may change if the trailer ball is removed

    Read more

    $55.95 $32.99

  • Sale -$71.96 CURT RockerBall Starter Kit - 5" Drop [45144]

    CURT CURT RockerBall Starter Kit - 5" Drop [45144]

    RockerBall Starter Kit - 5" DropThe CURT RockerBall™ cushion hitch provides improved comfort and enhanced control while towing, featuring our unique ShockDrop™ technology. An integrated cushion isolator allows the hitch ball to turn the standard ball mount into a cushion hitch with anti-rattle capabilities.The RockerBall™ ball mount kit is a shock-absorbing hitch accessory that dynamically reduces jerking and jarring while towing. As your trailer passes over bumps and potholes, it produces all kinds of vibrations, jolting, chucking, and noise. With a traditional metal-on-metal connection, these annoyances are directly transferred to your tow vehicle, making your ride noisy and uncomfortable and taking a toll on your towing system.The RockerBall™ completely changes your towing experience by absorbing the erratic movement and rattling of your trailer at the coupling point. This provides a smoother ride and increased control over the vehicle and trailer. It also reduces the amount of stress placed on your vehicle, receiver hitch, brakes, and suspension system.The RockerBall™ is also extremely low-maintenance compared to other torsion hitch and cushion hitch options. It has no airbags or bearings to service. Simply apply grease to the integrated zerk fitting as needed for continuous lubrication and smooth operation.This RockerBall™ hitch kit comes with a standard ball mount with a 5" drop and standard 2" shank to fit most class 3, class 4 and class 5 receiver hitches. It also includes an anti-rattle shim kit for maximum vibration resistance.The CURT RockerBall™ hitch ball is constructed from forged steel for exceptional strength. The base and ball mount are covered in a durable powder coat finish, and the ball itself has a chrome plating for long-lasting weather resistance.Features: Dynamic trailer ball featuring ShockDrop technology Dampen jerking and jarring from bumps and potholes for smoother towing Cushioned isolators reduce rattling and vibration for a more comfortable ride Reduces shock loads to the vehicle during sudden braking or acceleration Minimizes stress on tow vehicle's suspension and brakes for extended longevity Fits trailer hitches with a 2" x 2" receiver tube opening Virtually maintenance-free with no airbag or bearings to service Grease zerk fittings provide easy lubrication 5" drop for leveling towing with large or lifted trucks Forged steel ball for dependable towing power Durable black powder coat finish (chrome plating on the ball) Standard trailer ball diameter fits 2" couplers Rated for 7,500 lbs. GTW and 750 lbs. TW Tested for safety to meet SAE J684 specifications Specifications: Includes: 2" RockerBall #40047, ball mount #45050 and anti-rattle #22321 Ball Capacity: 7,500 lbs Ball Diameter: 2 in. Drop: 5in. Finish: Black powder coat Hub Warehouse: D01 Material: Forged steel Receiver Tube Size: 2 in. Shank Diameter: 2 in. Shank Length: 2 in. Tongue Weight: 750 lb. Warranty: Limited lifetime warranty (one-year finish, one-year parts)

    Read more

    $172.95 $100.99

  • Sale -$12.96 CURT Class 3 Ball Mount - 2" Shank - 7,500 lbs - 4" Drop 8-1/4" Long [45050]

    CURT CURT Class 3 Ball Mount - 2" Shank - 7,500 lbs - 4" Drop 8-1/4" Long [45050]

    Class 3 Ball Mount - 2" Shank - 7,500 lbs - 4" Drop & 8-1/4" LongCURT class 3, or standard-duty, ball mounts are a step up from classes 1 and 2. They feature a 2" x 2" shank and have a higher weight capacity for towing heavy-duty trailers, including utility trailers, boat trailers, campers, single-horse livestock trailers, and most recreational vehicle trailers. With class 3 trailer hitches being the most common type of trailer hitch for pickup trucks and SUVs, the class 3 ball mount, by association, is an excellent complement to this trailer hitch and these larger vehicles (NOTE: Never exceed the lowest weight capacity of any towing component, i.e., the vehicle, hitch, trailer, etc.).This particular class 3 ball mount has a gross trailer weight capacity of 7,500 lbs. and a tongue weight capacity of 750 lbs. It features a length of 8-1/4", a drop of 4", and a possible rise of 2". Class 3 ball mounts are CNC-formed and robotically welded to ensure unwavering precision and dependable strength in each and every unit. CURT mechanically descales each one to provide a smooth surface for a long-lasting finish. This class 3 ball mount comes with a durable gloss black powder coat finish to protect against corrosion, scratches, UV damage, and more to give it the thick skin it needs to face the road ahead.Features: Fits trailer hitches with a 2" x 2" receiver tube opening Equipped with a 1" hole to accept a trailer ball shank 2" rise or 4" drop for precise trailer leveling The hollow shank weighs less and can be used with an anti-rattle kit CNC-formed, robotically welded, and mechanically descaled for a perfect fit Protected by a durable powder coat finish Made in USA Specifications: Ball Hole: 1 in. Drop 4 in. Finish: Gloss black powder coat Gross Trailer Weight (GTW): 7,500 lb. Hub Warehouse: D01 Length: 8-1/4 in. Material: Carbon steel Part Type: Class 3 ball mount Receiver Tube Size: 2 in. Rise: 2 in. Tongue Weight (TW): 750 lb. Warranty: Limited lifetime warranty (one-year finish, one-year parts) *Trailer ball and hitch pin sold separately

    Read more

    $30.95 $17.99

  • Sale -$20.96 CURT Loaded Ball Mount w/2" Ball - 2" Shank - 2" Drop - 7,500 lbs [45036]

    CURT CURT Loaded Ball Mount w/2" Ball - 2" Shank - 2" Drop - 7,500 lbs [45036]

    Loaded Ball Mount with 2" Ball - 2" Shank - 2" Drop - 7,500 lbsWhen it comes to ball mounts, a CURT loaded ball mount is the complete package. These stingers come with all necessary towing components and are pre-fitted with a factory-torqued trailer ball, eliminating the need to mount and torque your own trailer ball. This means a loaded ball mount is ready for towing right out of the package! Each one also comes with a pin and clip for mounting the ball mount into the appropriate-size receiver tube. CURT offers loaded ball mounts in a variety of styles and weight ratings.This CURT loaded ball mount features a gross trailer weight capacity of 7,500 lbs. and a tongue weight capacity of 750 lbs. It comes with a 2" trailer ball, making it an excellent choice for towing most boat trailers, utility trailers, campers, livestock trailers, and recreational vehicle trailers used for hauling dirt bikes, motorcycles, and ATVs. (NOTE: Never exceed the lowest weight capacity of any towing component, i.e., the vehicle, hitch, trailer, etc.) This ball mount also has a length of 8-1/4", a drop of 2", and comes with a gloss black powder coat finish to resist rust, chipping, and UV damage. All CURT loaded ball mounts feature 2" x 2" shanks and are made with the same superior quality CURT puts into each of the company's products.Features: Rated at 7,500 lbs. gross trailer weight and 750 lbs. tongue weight Fits trailer hitches with a 2" x 2" receiver tube opening Factory-torqued CURT trailer ball accepts a 2" coupler 2" drop for precise trailer leveling The hollow shank weighs less and can be used with an anti-rattle kit CNC-formed, robotically welded, and mechanically descaled for a perfect fit Protected by a durable powder coat finish Trailer ball features a polished chrome-plated finish 5/8" hitch pin and clip for secure mounting in the receiver tube Assembled in the USA Specifications: Includes 2" trailer ball #40037, pin & clip Ball Diameter: 2 in. Drop: 2 in. Finish: Gloss black powder coat Gross Trailer Weight (GTW): 7,500 LB Hub Warehouse: D01 Length: 8-1/4 in. Material: Carbon Steel Part Type: Loaded ball mount Receiver Tube Size: 2 in. Tongue Weight (TW): 750 lb. Warranty: Limited lifetime warranty (one-year finish, one-year parts) *Weight capacity may change if the trailer ball is removed

    Read more

    $49.95 $28.99

  • Sale -$11.96 CURT 15 Dark Green Cargo Straps w/"S" Hooks - 300 lbs - 2 Pack [83015]

    CURT CURT 15 Dark Green Cargo Straps w/"S" Hooks - 300 lbs - 2 Pack [83015]

    15' Dark Green Cargo Straps with "S" Hooks - 300 lbs - 2 PackWrapping rope around the trailer and hoping for the best is not the ideal way to secure cargo. Even using a net of bungee cords can create an unsafe scenario if just one of those bungees pops loose. Using the right method to secure the cargo is an important aspect of towing that is too often overlooked. When users need cargo security that can handle the long haul, CURT cargo straps should be used. CURT offers two different types of cargo straps in a variety of colors and lengths and with various hook types to provide a complete towing solution.CURT cambuckle tie down cargo straps are a lightweight load-securing option and are especially useful when securing lighter loads and fragile cargo. They offer a direct influence over tension when tightening the strap, making it very difficult to over-tighten the strap and crush cargo. These cam straps are made of a tough, woven nylon material designed to be highly resistant to stretching and abrasion. They have a break strength of 900 lbs. and a work load limit of 300 lbs. They come equipped with rubber-coated S-hooks for a secure hold and strong resistance to corrosion and wear. These dark green cargo straps measure a total length of 15' and have a strap width of 1". Two cambuckle straps are included in this package.Packing up a vehicle for a long trip does not have to turn into a game of Tetris. With CURT cargo management, it is easy to give yourself adequate storage room, even in the smallest cars. For that weekend getaway or trip cross-country, you can bring it all with CURT.Features: Two 15' long straps perfect for securing cargo in trailers, truck beds and more Offers a superior tiedown method compared to bungee cords and rope Provides a work load limit of 300 lbs. with a break strength of 900 lbs. Cambuckle mechanism allows for quick, direct tension on lighter loads Straps constructed from high-strength, woven nylon S-hooks coated in rubber for rust and wear resistance Cambuckles protected by a durable yellow zinc-plated finish Specifications: Break Strength: 900 lb. Capacity: 300 lb. Color: Dark Green Hook Finish: Rubber-coated Hook Style: S-hook Hub Warehouse: D25 Part Type: Cargo strap Quantity Per Package: 2 Strap Length: 15 ft. Strap Width: 1 in. Warranty: Limited lifetime warranty (one-year finish, one-year parts)

    Read more

    $24.95 $12.99

  • Sale -$21.96 CURT 2" Trailer Ball - 3/4" x 2-1/8" Shank - 3,500 lb. - Stainless Steel [40082]

    CURT CURT 2" Trailer Ball - 3/4" x 2-1/8" Shank - 3,500 lb. - Stainless Steel [40082]

    2" Trailer Ball - 3/4" x 2-1/8" Shank - 3,500 lb. - Stainless SteelOut of the monotony comes one name that rises above all others. CURT trailer balls are designed for strength, ease of use, and, ultimately, to get you to your destination without hassle. CURT 2" trailer hitch balls are constructed from quality steel and are made with precision to fit your 2" trailer coupler like a hand in a glove. They are able to tow most standard-duty and heavy-duty trailers, such as utility trailers, boat trailers, campers, livestock trailers, and recreational vehicle trailers for hauling ATVs, snowmobiles, personal watercraft, and more. These tow balls are an excellent extension of your class 3 or class 4 trailer hitch and ball mount and are the ideal choice for most pickup trucks and SUVs. (NOTE: Never exceed the lowest weight capacity of any towing component, i.e., the vehicle, hitch, trailer, etc.)This particular 2" trailer ball offers a ball capacity of 3,500 lbs. It features a 3/4" shank diameter, a 2-1/8" shank length, 0" of rise, and a stainless steel finish to protect against rust and scratches. With its fine-threaded shank, this 2" trailer ball also offers an added measure of holding strength and provides smooth installation and torquing. To give you peace of mind while towing to that next destination, CURT also carefully tests out the trailer balls and ensures that each one meets U.S. VESC specifications.Features: Fits 2" couplers and accepts up to 3,500 lbs. GTW Stainless steel construction for excellent rust resistance Zinc-plated hex nut and helical lock washer for secure mounting Features fine threads for superior holding strength Tested for safety to meet U.S. VESC V-5 specifications Specifications: Ball Capacity: 3,500 lbs Ball Diameter: 2 in. Color: Stainless Steel  Finish: Polished stainless Hub Warehouse: D25 Material: Forged steel Shank Diameter: 3/4 in. Shank Length: 2-1/8 in. Shank Rise: 0 in. Torque: 160 ft. lb. Warranty: Limited lifetime warranty (one-year finish, one-year parts) *The mounting platform must be at least 3/8 in. thick, and the hole size must not be more than 1/16 in. larger in diameter than the threaded shank

    Read more

    $46.95 $24.99

  • Sale -$22.96 CURT 1-7/8" Trailer Ball - 3/4" x 2-1/8" Shank - 2,000 lb. Capacity - Stainless Steel [40080]

    CURT CURT 1-7/8" Trailer Ball - 3/4" x 2-1/8" Shank - 2,000 lb. Capacity - Stainless Steel [40080]

    1-7/8" Trailer Ball - 3/4" x 2-1/8" Shank - 2,000 lb. Capacity - Stainless SteelOut of the monotony comes one name that rises above all others. CURT trailer balls are designed for strength, ease of use, and, ultimately, to get you to your destination without hassle. CURT 2" trailer hitch balls are constructed from quality steel and are made with precision to fit your 2" trailer coupler like a hand in a glove. They are able to tow most standard-duty and heavy-duty trailers, such as utility trailers, boat trailers, campers, livestock trailers, and recreational vehicle trailers for hauling ATVs, snowmobiles, personal watercraft, and more. These tow balls are an excellent extension of your class 3 or class 4 trailer hitch and ball mount and are the ideal choice for most pickup trucks and SUVs. (NOTE: Never exceed the lowest weight capacity of any towing component, i.e., the vehicle, hitch, trailer, etc.)This CURT tow ball features a ball capacity of 2,000 lbs. It is able to tow most utility trailers, boat trailers, campers, smaller livestock trailers, and some recreational vehicle haulers. (NOTE: Never exceed the lowest weight capacity of any towing component, i.e., the vehicle, hitch, trailer, etc.) As with any trailer, be sure that your towing equipment is capable of handling the load before hitching up. This trailer ball also features a 3/4" shank diameter, a 2-1/8" shank length, 0" of rise, and a stainless steel finish to protect against corrosion and wear. Like all CURT trailer balls, the 1-7/8" balls are tested for your safety and meet all U.S. VESC specifications.Features: Fits 1-7/8" couplers and accepts up to 2,000 lbs. GTW Stainless steel construction for excellent rust resistance Zinc-plated hex nut and helical lock washer for secure mounting Features fine threads for superior holding strength Tested for safety to meet U.S. VESC V-5 specifications Specifications: Ball Capacity: 2,000 lbs Ball Diameter: 1-7/8 in. Color: Stainless Steel  Finish: Polished stainless Hub Warehouse: D25 Material: Forged steel Shank Diameter: 3/4 in. Shank Length: 2-1/8 in. Shank Rise: 0 in. Torque: 160 ft. lb. Warranty: Limited lifetime warranty (one-year finish, one-year parts) *The mounting platform must be at least 3/8 in. thick, and the hole size must not be more than 1/16 in. larger in diameter than the threaded shank

    Read more

    $46.95 $23.99

  • Sale -$23.96 CURT 27 Yellow Cargo Strap w/Flat Hooks - 3,333 lbs [83048]

    CURT CURT 27 Yellow Cargo Strap w/Flat Hooks - 3,333 lbs [83048]

    27' Yellow Cargo Strap with Flat Hooks - 3,333 lbsWrapping rope around the trailer and hoping for the best is not the ideal way to secure cargo. Even using a net of bungee cords can create an unsafe scenario if just one of those bungees pops loose. Using the right method to secure the cargo is an important aspect of towing that is too often overlooked. When users need cargo security that can handle the long haul, CURT cargo straps should be used. CURT offers two different types of cargo straps in a variety of colors and lengths and with various hook types to provide a complete towing solution.This CURT ratchet tie down strap is designed to accommodate larger, heavier loads. It is made from a high-strength, woven nylon material and comes with a ratcheting buckle that allows for superior tension on the load. It features a break strength of 10,000 lbs. and a work load limit of 3,333 lbs. This yellow cargo strap comes equipped with yellow zinc flat hooks for a superior hold and strong resistance to corrosion and wear. It measures a total length of 27' and has a strap width of 2". One ratchet strap is included in this package.Packing up a vehicle for a long trip does not have to turn into a game of Tetris. With CURT cargo management, it is easy to give yourself adequate storage room, even in the smallest cars. For that weekend getaway or trip cross-country, you can bring it all with CURT.Features: One 27' long strap is perfect for securing cargo in trailers, truck beds and more Offers a superior tiedown method compared to bungee cords and rope Provides a work load limit of 3,333 lbs. with a break strength of 10,000 lbs. Ratchet mechanism allows for superior tension on heavy loads Straps constructed from high-strength, woven nylon Ratchet and flat hooks are protected by a durable yellow zinc-plated finish Specifications: Break Strength: 10,000 lb. Capacity: 3333 lb. Color: Yellow Hook Finish: Yellow zinc Hook Style: Flat Hub Warehouse: D25 Part Type: Cargo strap Quantity Per Package: 1 Strap Length: 27 ft. Strap Width: 2 in. Warranty: Limited lifetime warranty (one-year finish, one-year parts)

    Read more

    $50.95 $26.99

  • Sale -$25.96 CURT Switch Ball Trailer Ball Set - 1-7/8" 2" Balls - 3/4" x 1-5/8" Shank [41782]

    CURT CURT Switch Ball Trailer Ball Set - 1-7/8" 2" Balls - 3/4" x 1-5/8" Shank [41782]

    Switch Ball Trailer Ball Set - 1-7/8" & 2" Balls - 3/4" x 1-5/8" ShankCURT Switch Ball trailer balls are a breakthrough in trailer ball technology. As a result of CURT innovation and engineering genius, switch balls offer the ultimate in convenience and reliability for a variety of light-duty and medium-duty towing applications. Essentially, a CURT Switch Ball is a trailer ball shank with a removable head. With its exclusive J-groove design, the switch ball trailer ball allows different heads or ball sizes to be placed on the shank to accommodate different coupler sizes. This means there is no need to switch between ball mounts or even own a second ball mount to fit an additional trailer. When you need to make the switch, simply twist the switchball head, lift it off, and twist on another. The J-groove ensures a solid hold on your trailer while still allowing for easy removal of the trailer ball without tools or pins.This CURT Switch Ball trailer ball set comes with two ball attachments. Ball 1 features a ball diameter of 1-7/8" and a ball capacity of 3,500 lbs. Ball 2 has a 2" ball diameter and a ball capacity of 6,000 lbs. The shank measures 1-5/8" long and 3/4" in diameter. CURT constructs these interchangeable hitch balls from premium-grade steel for strength and gives them a bright nickel-chrome finish for a long life. To ensure your safety and provide you with a tow ball you can depend on, CURT switch balls are independently tested in accordance with SAE J684.Features: Fits 1-7/8" or 2" couplers and accepts up to 6,000 lbs. GTW (depending on the ball) Exclusive 'J' groove design ensures a secure system No tools, coins, or pins are required for trailer ball installation Shank bears the weight, freeing the coupler from friction and binding Constructed from high-strength steel Protected by a premium-grade nickel chrome-plated finish Zinc-plated hex nut and helical lock washer for secure mounting Independently tested in accordance with SAE J684 for safety and proven safe Specifications: Ball 1 Diameter and Capacity: 1-7/8 in. - 3,500 lb. Ball 2 Diameter and Capacity: 2 in. - 6,000 lb. Finish: Chrome Hub Warehouse: D25 Neck Diameter: 1 in. Rise: 0 in. Shank Diameter: 3/4 in. Shank Length: 1-5/8 in. U.S. Patent (#): 5,169,168 Canadian Patent (#): 1,325,445 Warranty: Limited lifetime warranty (one-year finish, one-year parts)

    Read more

    $62.95 $36.99

  • Sale -$20.96 CURT Class 3 Ball Mount - 2" Shank - 7,500 lbs - 6" Drop 9-1/4" Long [45070]

    CURT CURT Class 3 Ball Mount - 2" Shank - 7,500 lbs - 6" Drop 9-1/4" Long [45070]

    Class 3 Ball Mount - 2" Shank - 7,500 lbs - 6" Drop & 9-1/4" LongCURT class 3, or standard-duty, ball mounts are a step up from classes 1 and 2. They feature a 2" x 2" shank and have a higher weight capacity for towing heavy-duty trailers, including utility trailers, boat trailers, campers, single-horse livestock trailers, and most recreational vehicle trailers. With class 3 trailer hitches being the most common type of trailer hitch for pickup trucks and SUVs, the class 3 ball mount, by association, is an excellent complement to this trailer hitch and these larger vehicles (NOTE: Never exceed the lowest weight capacity of any towing component, i.e., the vehicle, hitch, trailer, etc.).This particular class 3 ball mount can be used in the drop position to provide a drop of 6", a gross trailer weight capacity of 7,500 lbs., and a tongue weight capacity of 750 lbs. It can also be flipped to provide a rise of 4", a gross trailer weight capacity of 6,000 lbs., and a tongue weight capacity of 600 lbs. It features a length of 9-1/4". Class 3 ball mounts are CNC-formed and robotically welded to ensure unwavering precision and dependable strength in each and every unit. CURT mechanically descales each one to provide a smooth surface for a long-lasting finish. This class 3 ball mount comes with a durable gloss black powder coat finish to protect against corrosion, scratches, UV damage, and more to give it the thick skin it needs to face the road ahead.Features: Fits trailer hitches with a 2" x 2" receiver tube opening Equipped with a 1" hole to accept a trailer ball shank 4" rise or 6" drop for precise trailer leveling The hollow shank weighs less and can be used with an anti-rattle kit CNC-formed, robotically welded, and mechanically descaled for a perfect fit Protected by a durable powder coat finish Made in USA Specifications: Ball Hole: 1 in. Drop 6 in. Finish: Gloss black powder coat GTW/TW Ball Drop: 7,500 / 750 lb. GTW/TW Ball Rise: 6,000 LB / 600 lb. Hub Warehouse: D01 Length: 9-1/4 in. Material: Carbon steel Part Type: Class 3 ball mount Receiver Tube Size: 2 in. Rise: 4 in. Warranty: Limited lifetime warranty (one-year finish, one-year parts) *Trailer ball and hitch pin sold separately

    Read more

    $49.95 $28.99

  • Sale -$43.96 CURT 2-5/16" RockerBall Cushion Hitch Trailer Ball - 12,000 lbs [40249]

    CURT CURT 2-5/16" RockerBall Cushion Hitch Trailer Ball - 12,000 lbs [40249]

    2-5/16" RockerBall Cushion Hitch Trailer Ball - 12,000 lbsThe CURT RockerBall™ trailer ball provides improved comfort and enhanced control while towing, featuring our unique ShockDrop™ technology. An integrated cushion isolator allows this hitch ball to turn a standard ball mount into a cushion hitch with anti-rattle capabilities.The RockerBall™ trailer ball dynamically reduces jerking and jarring while towing. As your trailer passes over bumps and potholes, it produces all kinds of vibrations, jolting, chucking, and noise. With a traditional metal-on-metal connection, these annoyances are directly transferred to your tow vehicle, making your ride noisy and uncomfortable and taking a toll on your towing system.The RockerBall™ completely changes your towing experience by absorbing the erratic movement and rattling of your trailer at the coupling point. This provides a smoother ride and increased control over the vehicle and trailer. It also reduces the amount of stress placed on your vehicle, receiver hitch, brakes, and suspension system.The RockerBall™ is also extremely low-maintenance compared to other torsion hitch and cushion hitch options. It has no airbags or bearings to service. Simply apply grease to the integrated zerk fitting as needed for continuous lubrication and smooth operation.The RockerBall™ tow ball retrofits onto a variety of standard ball mounts, virtually any mount with a 3-inch wide trailer ball tongue platform and a 1-1/4-inch trailer ball hole. The anti-swivel base keeps the hitch ball properly oriented and locked in place when fully torqued.The CURT RockerBall™ hitch ball is constructed from forged steel for exceptional strength. The base is covered in a durable powder coat finish, and the ball itself has a chrome plating for long-lasting weather resistance.Features: Dynamic trailer ball featuring ShockDrop technology Dampens jerking and jarring from bumps and potholes for smoother towing Cushioned isolators reduce rattling and vibration for a more comfortable ride Reduces shock loads to the vehicle during sudden braking or acceleration Minimizes stress on tow vehicle's suspension and brakes for extended longevity Retrofits onto most existing ball mounts to improve current towing experience Virtually maintenance-free with no airbag or bearings to service Grease zerk fittings provide easy lubrication Anti-swivel base fits 3" wide ball mount tongues with 1-1/4" diameter hole Forged steel construction for dependable towing power Durable carbide black powder coat finish on base and chrome plating on ball Standard trailer ball diameter fits 2-5/16" couplers Rated for 12,000 lbs. gross trailer weight Tested for safety to meet SAE J684 specifications Specifications: Patent: # 11,192,408 Ball Capacity: 12,000 lbs Ball Diameter: 2-5/16 in. Finish: Chrome-plated Hub Warehouse: D25 Material: Forged steel Shank Diameter: 1-1/4 in. Warranty: Limited lifetime warranty (one-year finish, one-year parts) *Ball mount sold separately (not compatible with Rebellion XD ball mount)*The mounting platform must be at least 3/8" thick, and the hole size must not be more than 1/16" larger than the diameter of the threaded shank

    Read more

    $106.95 $62.99

  • Sale -$40.96 CURT 2-5/16" RockerBall Cushion Hitch Trailer Ball - 7500 lbs [40248]

    CURT CURT 2-5/16" RockerBall Cushion Hitch Trailer Ball - 7500 lbs [40248]

    2-5/16" RockerBall Cushion Hitch Trailer Ball - 7500 lbsThe CURT RockerBall™ trailer ball provides improved comfort and enhanced control while towing, featuring our unique ShockDrop™ technology. An integrated cushion isolator allows this hitch ball to turn a standard ball mount into a cushion hitch with anti-rattle capabilities.The RockerBall™ trailer ball dynamically reduces jerking and jarring while towing. As your trailer passes over bumps and potholes, it produces all kinds of vibrations, jolting, chucking, and noise. With a traditional metal-on-metal connection, these annoyances are directly transferred to your tow vehicle, making your ride noisy and uncomfortable and taking a toll on your towing system.The RockerBall™ completely changes your towing experience by absorbing the erratic movement and rattling of your trailer at the coupling point. This provides a smoother ride and increased control over the vehicle and trailer. It also reduces the amount of stress placed on your vehicle, receiver hitch, brakes, and suspension system.The RockerBall™ is also extremely low-maintenance compared to other torsion hitch and cushion hitch options. It has no airbags or bearings to service. Simply apply grease to the integrated zerk fitting as needed for continuous lubrication and smooth operation.The RockerBall™ tow ball retrofits onto a variety of standard ball mounts, virtually any mount with a 2-1/2-inch wide trailer ball tongue platform and a 1-inch trailer ball hole. The anti-swivel base keeps the hitch ball properly oriented and locked in place when fully torqued.The CURT RockerBall™ hitch ball is constructed from forged steel for exceptional strength. The base is covered in a durable powder coat finish, and the ball itself has a chrome plating for long-lasting weather resistance.Features: Dynamic trailer ball featuring ShockDrop technology Dampens jerking and jarring from bumps and potholes for smoother towing Cushioned isolators reduce rattling and vibration for a more comfortable ride Reduces shock loads to the vehicle during sudden braking or acceleration Minimizes stress on tow vehicle's suspension and brakes for extended longevity Retrofits onto most existing ball mounts to improve current towing experience Virtually maintenance-free with no airbag or bearings to service Grease zerk fittings provide easy lubrication Anti-swivel base fits 2-1/2" wide ball mount tongues with 1" diameter hole Forged steel construction for dependable towing power Durable carbide black powder coat finish on base and chrome plating on ball Standard trailer ball diameter fits 2-5/16" couplers Rated for 7,500 lbs. gross trailer weight Tested for safety to meet SAE J684 specifications Specifications: Patent: # 11,192,408 Ball Capacity: 7,500 lbs Ball Diameter: 2-5/16 in. Finish: Chrome-plated Hub Warehouse: D25 Material: Forged steel Shank Diameter: 2-1/2 in. Warranty: Limited lifetime warranty (one-year finish, one-year parts) *Ball mount sold separately (not compatible with Rebellion XD ball mount)*The mounting platform must be at least 3/8" thick, and the hole size must not be more than 1/16" larger than the diameter of the threaded shank

    Read more

    $97.95 $56.99

  • Sale -$43.96 CURT Towing Starter Kit w/2" Ball - 2" Shank - 7,500 lbs - 2" Drop [45534]

    CURT CURT Towing Starter Kit w/2" Ball - 2" Shank - 7,500 lbs - 2" Drop [45534]

    Towing Starter Kit with 2" Ball - 2" Shank - 7,500 lbs - 2" DropThe towing starter kit by CURT Manufacturing is the most convenient way to get set up with the basic towing gear you will need for a brand-new trailer hitch. The starter kit eliminates the need for you to make multiple purchases and to try to figure out if you are buying the right products to fit your existing equipment. The CURT towing starter kit includes a ball mount, trailer ball, hitch pin and clip, hitch lock, and a rubber receiver tube cover. It has everything you need to get your trailer coupled to your receiver hitch.This kit features a ball mount with a gross trailer weight capacity of 7,500 lbs. and a tongue weight capacity of 750 lbs. It measures 8-1/4" long, has 2" of drop, and 3/4" of rise. CURT ball mounts are CNC-formed and robotically welded to be an exact fit for your towing application. They are built with quality steel for strength and coated with a high-gloss black powder coat finish for durable corrosion and scratch resistance.Features: Rated at 7,500 lbs. gross trailer weight and 750 lbs. tongue weight Fits trailer hitches with a 2" x 2" receiver tube opening Factory-torqued trailer ball accepts 2" couplers CNC-formed, robotically welded, and mechanically descaled for a perfect fit Key-operated hitch lock adds security to your trailer Hitch tube cover protects the receiver from grime and rust when not in use A sturdy, reusable case keeps items well-protected Assembled in the USA Specifications: Includes: Ball mount #45030, trailer ball #40037, hitch lock #23515, hitch tube cover #22272, pin & clip and reusable case Drop 2 in. Finish: Gloss black powder coat Gross Trailer Weight (GTW): 7,500 lb. Hub Warehouse: D01 Length: 8-1/4 in. Rise: 3/4 in.  Tongue Weight (TW): 750 lb. Warranty: Limited lifetime warranty (one-year finish, one-year parts) *Reusable case is able to be shelved or hung on pegs*Weight capacity may change if the trailer ball is removed

    Read more

    $105.95 $61.99

  • Sale -$6.96 CURT 1-7/8" Trailer Ball - 3/4" x 1-5/8" Shank - 2,000 lb. Capacity - Chrome [40061]

    CURT CURT 1-7/8" Trailer Ball - 3/4" x 1-5/8" Shank - 2,000 lb. Capacity - Chrome [40061]

    1-7/8" Trailer Ball - 3/4" x 1-5/8" Shank  - 2,000 lb. Capacity - ChromeCURT 1-7/8" trailer balls are constructed from high-strength steel to match the towing power of class 1 or class 2 trailer hitch and ball mount and come with fine threads on the shank for improved holding strength. Having a trailer ball that matches your coupler size is absolutely essential. At CURT, the trailer balls are engineered to be precisely fitted. When we stamp 1-7/8" into the top of each hitch ball, we actually mean 1-7/8".This CURT tow ball features a ball capacity of 2,000 lbs. It is able to tow most utility trailers, boat trailers, campers, smaller livestock trailers, and some recreational vehicle haulers. (NOTE: Never exceed the lowest weight capacity of any towing component, i.e., the vehicle, hitch, trailer, etc.) As with any trailer, be sure that the towing equipment is capable of handling the load before hitching up. This trailer ball also features a 3/4" shank diameter, a 1-5/8" shank length, 0" of rise, and a nickel-chrome finish to protect against corrosion and wear. Like all CURT trailer balls, the 1-7/8" balls are tested for your safety and meet all U.S. VESC specifications.Features: It fits 1-7/8" couplers and accepts up to 2,000 lbs. GTW Constructed from high-strength, hot-forged steel Protected by a durable chrome-plated finish Zinc-plated hex nut and helical lock washer for secure mounting Features fine threads for superior holding strength Tested for safety to meet U.S. VESC V-5 specifications Specifications: Ball Capacity: 2,000 lbs Ball Diameter: 1-7/8 in. Finish: Chrome-plated Hub Warehouse: D25 Material: Forged steel Shank Diameter: 3/4 in. Shank Length: 1-5/8 in. Shank Rise: 0 in. Torque: 160 ft. lb. Warranty: Limited lifetime warranty (one-year finish, one-year parts) *The mounting platform must be at least 3/8 in. thick, and the hole size must not be more than 1/16 in. larger in diameter than the threaded shank

    Read more

    $15.95 $8.99

  • Sale -$44.96 CURT Towing Starter Kit w/2" Ball - 2" Shank - 7,500 lbs - 4" Drop [45554]

    CURT CURT Towing Starter Kit w/2" Ball - 2" Shank - 7,500 lbs - 4" Drop [45554]

    Towing Starter Kit with 2" Ball - 2" Shank - 7,500 lbs - 4" DropThe towing starter kit by CURT Manufacturing is the most convenient way to get set up with the basic towing gear you will need for a brand-new trailer hitch. The starter kit eliminates the need for you to make multiple purchases and to try to figure out if you are buying the right products to fit your existing equipment. The CURT towing starter kit includes a ball mount, trailer ball, hitch pin and clip, hitch lock, and a rubber receiver tube cover. It has everything you need to get your trailer coupled to your receiver hitch.This kit features a ball mount with a gross trailer weight capacity of 7,500 lbs. and a tongue weight capacity of 750 lbs. It measures 8-1/4" long, has 4" of drop, and 2" of rise. CURT ball mounts are CNC-formed and robotically welded to be an exact fit for your towing application. They are built with quality steel for strength and coated with a high-gloss black powder coat finish for durable corrosion and scratch resistance.Features: Rated at 7,500 lbs. gross trailer weight and 750 lbs. tongue weight Fits trailer hitches with a 2" x 2" receiver tube opening Factory-torqued trailer ball accepts 2" couplers CNC-formed, robotically welded, and mechanically descaled for a perfect fit Key-operated hitch lock adds security to your trailer Hitch tube cover protects the receiver from grime and rust when not in use A sturdy, reusable case keeps items well-protected Assembled in the USA Specifications: Includes: Ball mount #45050, trailer ball #40037, hitch lock #23515, hitch tube cover #22272, pin & clip and reusable case Drop 4 in. Finish: Gloss black powder coat Gross Trailer Weight (GTW): 7,500 lb. Hub Warehouse: D01 Length: 8-1/4 in. Rise: 2 in.  Tongue Weight (TW): 750 lb. Warranty: Limited lifetime warranty (one-year finish, one-year parts) *Reusable case is able to be shelved or hung on pegs*Weight capacity may change if the trailer ball is removed

    Read more

    $108.95 $63.99

  • Sale -$19.96 CURT 16 Red Cargo Straps w/"S" Hooks - 500 lbs - 4 Pack [83002]

    CURT CURT 16 Red Cargo Straps w/"S" Hooks - 500 lbs - 4 Pack [83002]

    16' Red Cargo Straps with "S" Hooks - 500 lbs - 4 PackWrapping rope around the trailer and hoping for the best is not the ideal way to secure cargo. Even using a net of bungee cords can create an unsafe scenario if just one of those bungees pops loose. Using the right method to secure the cargo is an important aspect of towing that is too often overlooked. When users need cargo security that can handle the long haul, CURT cargo straps should be used. CURT offers two different types of cargo straps in a variety of colors and lengths and with various hook types to provide a complete towing solution.These CURT ratchet tie-down straps are designed to accommodate larger, heavier loads. They are made from a high-strength, woven nylon material and come with a ratcheting buckle that allows for superior tension on the load. They feature a break strength of 1,500 lbs. and a workload limit of 500 lbs. These red cargo straps come equipped with rubber-coated S-hooks for a secure hold and strong resistance to corrosion and wear. They measure a total length of 16' and have a strap width of 1". Four ratchet straps are included in this package.Packing up a vehicle for a long trip does not have to turn into a game of Tetris. With CURT cargo management, it is easy to give yourself adequate storage room, even in the smallest cars. For that weekend getaway or trip cross-country, you can bring it all with CURT.Features: Four 16' long straps are perfect for securing cargo in trailers, truck beds, and more Offers a superior tiedown method compared to bungee cords and rope Provides a workload limit of 500 lbs. with a break strength of 1,500 lbs. The ratchet mechanism allows for superior tension on heavy loads Straps constructed from high-strength, woven nylon S-hooks coated in rubber for rust and wear resistance Ratchets are protected by a durable yellow zinc-plated finish Specifications: Break Strength: 1,500 lb. Capacity: 500 lb. Color: Red Hook Finish: rubber-coated Hook Style: S-hook Hub Warehouse: D25 Part Type: Cargo strap Quantity Per Package: 4 Strap Length: 16 ft. Strap Width: 1 in. Warranty: Limited lifetime warranty (one-year finish, one-year parts)

    Read more

    $41.95 $21.99

  • Sale -$15.63 CURT ActiveLink 1-1/4" Receiver Shank - Up to 3500 lbs [18401] CURT ActiveLink 1-1/4" Receiver Shank - Up to 3500 lbs [18401]

    CURT CURT ActiveLink 1-1/4" Receiver Shank - Up to 3500 lbs [18401]

    ActiveLink 1-1/4" Receiver Shank - Up to 3500 lbsActiveLink is a revolutionary towing solution uniquely designed for an active lifestyle. Its intuitive approach was carefully engineered to allow users to quickly, easily, and securely swap out accessories like never before. Stop struggling underneath the vehicle with awkward hitch accessories and experience the difference with ActiveLink.ActiveLink is all about versatility and ease of use, providing a solid hitch hookup for whatever accessory users need. Simply install the multi-function shank into an existing receiver hitch. Then, choose an accessory, load up the cargo, and start the adventure! Users can select the ActiveLink bike rack, cargo carrier, or other accessory—whichever is needed for the day's activities.Unlike a traditional shank that requires users to get down on their hands and knees and feel around grimy components to line everything up, ActiveLink makes things easy. It has a bottom pivot point on the shank that provides a resting point for the accessory attachment, perfectly lining up the hitch pin holes for an effortless connection. Drop in the accessory or swap it out in a snap. It's that easy.ActiveLink is built for an outdoor, active lifestyle, featuring a strong steel construction and a weather-resistant finish. It also promotes a comfortable towing experience, featuring built-in anti-rattle components for a quieter drive.Features: Unique connections allow users to easily swap out accessories as needed Patent-pending design for fast, secure accessory attachment with a pin and clip The bottom bolt provides an integrated resting point for struggle-free installation Tilt-away feature for easier access to the vehicle cargo area Compatible with ActiveLink bike racks and cargo carrier Anti-rattle hitch pin and anti-rattle hand wheel for reduced noise Plastic interior lining protects against scratches and helps suppress vibration Tested and rated for 3,500 lbs. GTW and 350 lbs. TW Strong steel construction Dual E-coat and carbide black powder coat for lasting weather resistance Notes:Includes shank only (accessories sold separately)Specifications: Finish: Black Powder Coat  Gross Trailer Weight: 3,500 lbs. Hub Warehouse: D25 Installation Time (Exact): 0 Material: Carbon Steel Max Load: 180 lbs. Mount Type Description: Not applicable Product Weight: 5.9 lbs. Tongue Weight: 350 lbs. Receiver Tube Size: 1-1/4 in. Warranty: Limited Lifetime warranty (one-year finish, one-year parts)

    Read more

    $54.62 $38.99

  • Sale -$91.59 CURT ActiveLink SE Series Bike Rack - 4 Bikes Up to 180 lbs [18411] CURT ActiveLink SE Series Bike Rack - 4 Bikes Up to 180 lbs [18411]

    CURT CURT ActiveLink SE Series Bike Rack - 4 Bikes Up to 180 lbs [18411]

    ActiveLink SE Series Bike Rack - 4 Bikes Up to 180 lbsThe ActiveLink SE bike rack is all about bringing maximum confidence and convenience to an active, outdoor lifestyle. It is built around the revolutionary ActiveLink technology from CURT, a hitch-mounted system that allows for fast, easy, and secure attachment of hitch accessories like never before. This model transports up to four bikes at once and is rated to hold up to 180 lbs.Unlike a traditional hitch connection that requires users to get down on their hands and knees and feel around grimy components to line everything up, this bike rack features the ActiveLink shank. Simply install the shank one time in a receiver, and users can swap out accessories in a flash. The shank features a bottom bolt that provides a resting point for the accessory attachment, perfectly lining up the hitch pin holes for an effortless connection. Drop in the bike rack whenever users need it or swap it out in a snap. It’s that easy.The ActiveLink 4-bike rack from CURT is constructed from high-strength steel and provides space to hang up to two bikes at one time. The rubber cradles and rubber bumper on the vertical support tube keep the bikes secure while protecting the frames from scuffs and scratches. The rack also has a tilt-away pivot point for convenient access to a vehicle's rear cargo area, and the arms of the rack fold down as needed for compact storage. To help protect this CURT bike rack from the elements, it comes with a dual finish of A-coat and a durable black powder coat.Features: Patent-pending ActiveLink design for fast, secure attachment with pin and clip The unique connection allows users to easily swap out accessories as needed Shank provides an integrated resting point for struggle-free installation Securely holds up to two bikes with a max weight capacity of 180 lbs. Rubber bumper pad on vertical support tube to protect from scuffs and scratches Adjustable rubber cradles to accept various frame tube sizes Tilt-away feature for easier access to the vehicle cargo area Arms fold down when not in use for compact storage Anti-rattle hitch pin and anti-rattle hand wheel for reduced noise Plastic lining on the shank helps suppress vibration Integrated handle for easy removal and carrying Built-in reflectors on the ends of the arms for increased visibility Steel construction with dual E-coat and carbide black powder coat finish Limited lifetime warranty (one-year finish, one-year parts) Notes: Includes bike rack and shank (compatible with ActiveLink shank only) For use with any frame-mounted 2" class 3 or higher trailer hitch receiver. Clamp-on bumper receivers and traditional 4" square bumpers should not be used to mount bike racks. Do not exceed receiver weight limits. Specifications: Finish: Black Powder Coat  Hub Warehouse: D25 Installation Time (Exact): 0 Material: Carbon Steel Mount Type Description: Not applicable Number of Bikes: 4 Product Weight: 36.9 lbs. Receiver Tube Size: 2 in. Warranty: Limited Lifetime warranty (one-year finish, one-year parts)

    Read more

    $311.58 $219.99

You have seen 48 out of 120 products

Show more products

Footer image

© 2025 REBELLION MARINE, Powered by Shopify

    Login

    Forgot your password?

    Don't have an account yet?
    Create account

    Add address