G3 Anchor Winch Wireless Remote - Auto DeployThe TRAC Outdoors G3 Anchor Winch Wireless Remote allows you to wirelessly raise and lower your anchor. It provides remote control and push-button anchor winch operation.Features: Use the wireless remote anywhere in the boat For use with the TRAC G3 Fisherman 25 (69002/T10108-G3) or Pontoon 35 (69003/T10109-G3)

Read more less

Foot Switch - Up - WhiteAnchor lifting switch w/safety cover to prevent accidental push-button operation.

Read more less

Freedom Shaft Service KitMaxwell shaft service kit for Maxwell Freedom series windlasses.

Read more less

Replacement Stripper Arm for RC10 & HRC10Maxwell replacement stripper arm specifically for RC10 and HRC10.

Read more less

MAXWELL AA710WIRELESS, HAND HELD REMOTE WINDLASS CONTROLLER AND RODE COUNTERAll the features of the AA560 plus options to control a bow thruster or deck lights and anchor wash. High level wireless transmission security - 2.4GHz ISM band Hand held controller displays rode count plus signal strength and battery level Console requires two AA batteries Ergonomic shape with wrist strap connector Water resistant to IP65 Rubber moulding for grip and non slip protection Console holder and protective cover Shockproof IEEE 802.15.4 compliant Kit includes 1 hand held remote control and 1 base station, 1 sensor and 1 magnet.Note: Two base stations can be combined and controlled by one remote to allow control of two windlasses. Plus, Plug and Play connectors, T-junctions and Gender Adaptors are also available. Contact your Maxwell Dealer. Quick Guide (pdf)Brochure (pdf)

Read more less

Rode CounterAuto Anchor 150 - panel mount rode counter for electric or hydraulic windlasses using all-chain or rope/chain rode. Rode length monitoring from the helm. Large LCD display with adjustable red back lighting shows length of anchor rode deployed. Display in feet or metres. Docking alarm warns skipper when anchor is close to docking. Easy set up with pre-programmed calibrations for rope/chain ropes. Install one or more units or combine with the AA550RC, AA500C or AA601 for multiple stations. Works on 12 or 24V DC. Standard 60mm (2.36) marine instrument console. This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Quick Guide (pdf)Brochure (pdf)

Read more less

Maxwell AA560Panel Mount Windlass Controller and Rode Counter Preset stopping point on retrieval One-touch function to deploy and retrieve a preset length of rode Adjustable back lit display in feet, metres or fathoms Graphic LCD screen featuring intuitive user interface for simple operation Displays windlass speed and direction, plus battery voltage Safety lock to help protect against accidental windlass deployment Logs windlass operation hours to help ensure regular windlass maintenance This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Quick Guide (pdf)Brochure (pdf)

Read more less

Pro-Series Bearings Kit Bearing kit for Generation 1 and 2 Pro-Series and Pro-Fish series windlasses.Compatible With:Lewmar windlasses - Generation 1 and 2In the Box: Roller clutch x  one (1) External circlip x one (1) Roller bearings (varied sizes) x five (5) *Sold as an Individual

Read more less

Generation 2 Pro-Series Compound Gear Kit Compound gear assembly for generation 2 Pro-Series, Pro-Fish and 700/1000 series windlasses.Compatible With:Generation 2 Pro-Series, Pro-Fish and 700/1000 series windlasses*Sold as an Individual

Read more less

HRC1004L 4-Button Remote with LED LightThe main innovation of the multipurpose HRC hand-held remote control is the built-in LED lamp, which facilitates operation in the dark. This is the only hand-held remote in the nautical sector with this exclusive feature.HRC multipurpose hand-held remote controls are designed for the remote operation of various on-board electrically operated equipment such as cranes, gangways, windlasses, sea ladders, etc. HRC is constructed with rubber inserts to ensure high strength, long durability, perfect watertightness, and a secure grip.HRC Remote Controls Are Supplied Complete With: A connecting cable is extensible up to 4.2 m. A watertight deck plug and socket A support bracket for stowing after use Built-in LED lamp HRC units are maintenance-free

Read more less

HRC1004 4 Button Remote ControlHRC Quick Handheld is a multipurpose remote with 4 buttons. This remote is constructed with rubber inserts to ensure high strength, long durability, perfect watertightness, and a secure grip. HRC remote controls are supplied complete with a connecting cable extensible up to 4.2 meters, a watertight deck plug and socket, and a support bracket for stowing after use.ApplicationsDesigned for the remote operation of various on-board electrically operated equipment such as cranes, gangways, windlasses, sea ladders, etc.Features: Watertight 4 buttons

Read more less

T6415-12 Reversing Solenoid 12V Unit for Windlass MotorsThe Quick T6415 is a reversing contactor that is able to operate electric motors for windlasses and capstans. Due to the external connections, this unit is very easy to install. The casing of this unit is IP66 waterproof. This unit is sold complete with the solenoid unit and product sheet.

Read more less

Quick T6315 is a non-reversing contactor that is able to operate electric motors for windlasses and capstans. Due to the external connections, this unit is very easy to install. The casing of this unit is IP66 waterproof. This unit is sold complete with the solenoid unit and product sheet. For use with 700, 1000, 1400, 1500, 1700 Watt Motors, 12V.

Read more less

Gypsy Drum Deck Unit - V4/V5 Lewmar introduces the world's first compact stainless steel windlass for power and sailboats. The beautifully styled deck unit conceals a robust, reliable drivetrain, worm gearbox, and splined shaft for maximum strength and control.Features: Rope-chain gypsy Cone clutch for smooth, effortless control Manual Free-Fall W.A.R.P Drum (Drum version only) Robust and reliable drive train Manual override (optional) The most oversized rope chain windlass in the range *You will also require a gypsy, motor gearbox, circuit breaker, contactor, and switches. Owner's Manual (pdf)

Read more less

Pro-Sport Control Arm Kit Replacement control arm kit for Pro-Sport windlasses.Compatible With:Pro-Sport windlass*Sold as an Individual 

Read more less

Pro-Series Generation 3 Gasket Kit Replacement gasket kit forPro-Series Genration 3 windleasses.Compatible With:Pro-Series Generation 3 windlass*Sold as an Individual 

Read more less

V700 Fastening Kit 1 (Metric) Replacement fastening kit 1 for V700 windlasses.Compatible With:Lewmar V700 windlass*Sold as an Individual Owner's Manual (pdf)

Read more less

Pro-Series Control Arm Kit Replacement control arm for Pro-Series 700 and 1000 windlasses.Compatible with:Pro-Series 700 and 1000 windlasses*Sold as an Individual 

Read more less

V700 Compound Gear Assembly Replacement compound gear assembly for V700 windlass.Compatible With:Lewmar V700 windlass*Sold as an Individual  Owner's Manual (pdf)

Read more less

Pro-Fish Drive Cap Assembly KitAllow your Series Pro-Fish 700 and 1000 windlass models to allow the anchor and rode in free-fall fashion.  No more waiting for the for the windlass motor to mechanically lower the anchor.Features: Direct replacement part Able to be manually overridden or controlled with a standard winch handle Made of Stainless Steel In the Box: Drive Cap with pin Plunger Instruction Manual *Sold as an Individual 

Read more less

CHSX Deck Switch Closed - BlackCompatible with 12/24V Lewmar electric winches and windlasses, the CHSX Deck Switch offers a protected switch that is weather-resistant, easily installed, easy to use, and prevents accidental activation. Features: Suitable for DC electric windlasses running on 12 or 24v IP67/5 rated for water resistance Twin sealed switch compartment New lower-profile design with updated styling Technical Specifications: Material - Composite plastic Position - Closed In the Box: Deck switch Instruction manual *Sold as an individual Quick Guide (pdf)

Read more less

Lewmar Deck Foot Switch - Windlass Down - Grey PlasticLewmar Deck Foot Switches are single-direction switches and come ready to install.  With a hinged cover to prevent accidental operation, they are suitable for DC electric windlasses running on 12 or 24 volts and must be used with a contactor or control box. Technical Specifications: Switch Direction - Down Material - Composite plastic Power - 12/24V Color - Grey *Sold as an Individual

Read more less

Pro-Series Generation 2 Gears & Shaft Kit Replacement gears and shaft kit for Pro-Series and Pro-Fish windlasses.Compatible With:Pro-Series and Pro-Fish windlasses.*Sold as an Individual 

Read more less

V700 Fall Safe Kit Fall Safe kit for Lewmar V700 windlass.Compatible With:Lewmar V700 windlassIn the Box: Fail Safe Lever  Fail Safe Shoulder Screw Fail Safe Spring Fail Safe Pawl Mounting Screw *Sold as an Individual  Owner's Manual (pdf)

Read more less

Deckhand 40 Remote Switch25' cord allows you to operate the DeckHand 40 from anywhere on the boatWARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Get precision boat placement and the ability to stay on the fish as long as you want with a DeckHand electric anchor winch. It automatically raises or lowers your anchor at the touch of a button, and its special anti-drag system senses the bottom to allow for controlled drifting.Each standard DeckHand model runs on a 12-volt battery (not included) and features a 2-year warranty.WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Owner's Manual (pdf)

Read more less

Pro Series Generation 1 & 2 Motor - 12V Replacement 12 V motor for Generation 1 and 2 Pro-Series/Fish Series windlasses.Compatible With:Lewmar windlasses - Generation 1 and 2In the Box:12 V Motor x  one (1)*Sold as an Individual

Read more less

Pro-Series Bearings Kit - 2nd GenerationBearing kit for Generation 2 Pro-Series and Pro-Fish series windlasses.Compatible With:Lewmar Pro-Series and Pro-Fish windlasses - Generation 2In the Box: Roller clutch x  one (1) External circlip x one (1) Roller bearings (varied sizes) x five (5) *Sold as an Individual 

Read more less

PM Solenoid Pack - 12VMaxwell's PM Solenoid Pack that is 12V.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

Spring-Pressure Arm for RC6, 8 & 10Maxwell Spring-Pressure Arm specifically for RC6, RC8 and RC10.

Read more less

Reversing Solenoid Pack - 12VMaxwell Reversing Solenoid Pack 12V, replaces P19045.

Read more less

Replacement Stripper for RC6/RC8 WindlassWindlass Replacement Stripper Arm Assembly KitApplications: Maxwell RC6 and RC8 Windlass

Read more less

Motor Cima - 1200W - 12V - 4-Hole Flange 12V 1200W DC 3500RPM IP66 Diameter: 114 x 181mm This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

Up/Down Footswitch - Compact, WhitePart #: P104809Maxwell's compact up and down foot switches are available in black and white versions. Operates via solenoids thus allowing smaller diameter wiring. Quick Guide (pdf)Brochure (pdf)

Read more less

QNC CHC Chain CounterQNC CHC is a complete and reliable tool to remotely operate the windlass and check the length of the lowered chain by means of the color graphic display. The panel surface is completely black tempered glass.Features: Automatic descent function Up alarm function Anchor weighing function in case of sensor failure. Windlass management with auto-free fall. Display the lowered chain length, in meters, feet, and fathom. Glass front Extremely thin profile Capacitive keys High brightness 3.5” color graphic display Multilingual user interface Power supply 12/24 Vdc Functioning over a wide range of environmental temperatures Protection rating IP67 CAN bus Communication Interface

Read more less

Foot Switch - Down - WhiteAnchor lowering switch w/safety cover to prevent accidental push-button operation.

Read more less

FootswitchSafety cover prevents accidental operation.

Read more less

Pro-Series Clutch & Cone Kit Replacement clutch and cone for Pro-Series windlasses.Compatible With:Pro-Series and Pro-Sport 550 Windlasses*Sold as an Individual

Read more less

AA Sensor Cable for AA150 & AA560 15M (49.2')The Maxwell AA Sensor Cable is compatible with AA150 & AA560 Rode Counters.Features:The male plugs on both ends of this cable are directly compatible with the female plugs on the console and sensor cablesDimensions: Length: 49' (15M)

Read more less

EMERGENCY CRANK HANDLE (RC8, RC10, RC12 SERIES)For use with RC8, RC10, RC12 & Freedom Series anchor winches. Constructed of light weight, durable injection-moulded plastic, these handles float if accidentally dropped overboard. Quick Guide (pdf)Brochure (pdf)

Read more less

Pressure Arm Upgrade KitMade specifically for Maxwell's Freedom Series of Windlasses.

Read more less

Generation 3 Pro-Series Compound Gear Kit Compound gear assembly for generation 2 Pro-Series, Pro-Fish and 700/1000 series windlasses.Compatible With:Generation 3 Pro-Series, Pro-Fish and 700/1000 series windlasses*Sold as an Individual

Read more less

Pro-Series Generation 3 Motor Kit - 12V Replacement 12 V motor for Pro-Fish and Pro-Series windlasses.Compatible With:Pro-Fish and Pro-Series (700/1000) windlasses.*Sold as an Individual

Read more less

Pro-Fish Plunger Kit Replacement plunger kit for Pro-Fish windlasses.Compatible With:Pro-Fish windlass*Sold as an Individual

Read more less

Pro Series Windlass Gypsy #516 Replacement gypsy on Windlass Model Pro-Fish/Series 1000Features: Rope-chain gypsy Cone clutch for smooth, easy control Manual Free Fall W.A.R.P Drum Robust and reliable drivetrain Manual override (optional) Technical Specifications: Rope Size - 9/16 to 5/8" (14.29 to 15.85 mm) (3 strand hard lay up) Chain Size - 5/8" (15.85 mm) ( Campbell S3, Lewmar 9.5mm G40) *Sold as an Individual 

Read more less

Replacement Windlass Motor Kit - 12VReplacement Windlass Motor.Compatible with:  Lewmar V700  Lewmar Sprint 600  Technical Specifications: Power Supply - 12V Current Draw - 40Amp In the Box: Motor Gasket Mounting hardware *Sold as an Individual

Read more less

Lewmar Deck Foot Switch - Windlass Up - Grey PlasticLewmar Deck Foot Switches are single-direction switches and come ready to install.  With a hinged cover to prevent accidental operation, they are suitable for DC electric windlasses running on 12 or 24 volts and must be used with a contactor or control box. Technical Specifications: Switch Direction - Up Material - Composite plastic Power - 12/24V Color - Grey *Sold as an Individual

Read more less

FootswitchSafety cover prevents accidental operation.

Read more less