90° P-Trap Fuel Tank Vent - Flush Mount - Black with Stainless Steel Vent HeadThis Attwood 90-Degree P-Trap Fuel Tank Vent reliably helps prevent water from entering the fuel tank while still allowing air to vent freely during normal sea conditions and washdowns. This vent’s effectiveness. eliminates the need for an anti-siphon loop in the vent hose. This is a flush mount vent for use with a 5/8-inch interior diameter hose. It requires a 1-3/8-inch installation hole and can be used with a maximum hull thickness of 1 inch.Features: This black vent with a stainless steel vent head meets ABYC standards Flush Mount - 5/8" I.D. hose (inch) 1-3/8" install. hole size (inch) 1" Max. hull thickness *Compatible with Ethanol blended fuels Quick Guide (pdf)

Read more less

Stainless Steel Midget Vent - Small Midget Vents provide a splash-proof opening through transoms, cabin sides, etc. Great for routing cables and wires or for covering thru-hull openings to shield water spray. Ideal for small lockers, they provide attractive cover for ventilation holes while also preventing odors. Corrosion resistant stamped 304 stainless steel construction. Easy to install with pre-drilled holes for three #6 RH fasteners (not included). WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

90 degree Gas Vent. Picture of product is the center image. Round Head. Hose is 3/4", Hole size is 9/16"

Read more less

Cowl VentilatorAttwood hull-mounted vents are designed to install by fastening as a complete unit from either inside or outside the hull. Ventilation hose (not included) twists into the bottom of the box to form a raised water barrier. Plastic vents are corrosion-resistant, will not discolor. All collector boxes and vents are designed for intake or exhaust and meet ABYC H-2 cross sectional area requirements.For use with 3" I.D. wire-supported ventilation hose. Features flexible hose flange that is screwed onto hose, then vent snaps onto the flange. Vent constructed of chrome-plated die-cast Perma-Plate® ZAMAK. Flange is non-corrosive plastic. Installs with #8 screws.Installation Hole Size: 3-1/4" to 3-1/2"WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Stainless Steel Louvered Vent - 5" x 4-5/8" Louvered Vents are designed to promote air circulation and prevent mold, mildew, and unpleasant odors. Ideal for cabin doors, lockers, dock boxes, etc. Easy to install with six #6 RH fasteners (not included). Corrosion resistant stamped 304 stainless steel construction. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Stainless Steel Clam Shell Vent - Large Large Clam Shell Ventilators provide splash protection for vent holes, wires, cable runs, or blower-exhaust hose openings. Corrosion resistant 304 stamped stainless steel construction. Can be used for cabin ventilation with the addition of a dorade box. Clam Shell Vents are ideal for applications where a taller vent would foul lines or restrict crew movement. Easy to install with pre-drilled holes for five #6 RH fasteners (not included).WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

90° P-Trap Fuel Tank Vent -  Black with Black Vent HeadThis Attwood 90-Degree P-Trap Fuel Tank Vent reliably helps prevent water from entering the fuel tank while still allowing air to vent freely during normal sea conditions and washdowns. This vent’s effectiveness eliminates the need for an anti-siphon loop in the vent hose. It requires a ¾-inch installation hole and can be used with a maximum hull thickness of 9/16 inches.  Features: Standard Mount - (inch) 5/8" I.D Hose Reliably helps prevent water from entering the fuel tank Still allows air to vent freely during normal sea conditions and washdowns This black vent with a black vent head meets ABYC standards *Compatible with Ethanol blended fuels. Quick Guide (pdf)

Read more less

Gas Tank Vent w/Swivel Elbow - Chrome/BlackFeatures: Chrome Plated Zinc Alloy Cap with Zinc Alloy Elbow Black or White Polymer Splash Guards Removable 30 Mesh Stainless Steel Wire Screen Flame Arrestor - for use with fuel applications Design Allows Elbow to be Rotated to any Position Specs: For Hose Size: 5/8" Max. Hull Thickness: 1"

Read more less

Stainless Steel Round Louvered Vent - 4" Round Louvered Vents allow air in while keeping water out. Installs with four #6 FH fasteners (not included). Corrosion resistant stamped 304 stainless steel construction. Vent area 4” 0.88 in2. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Stainless Steel Locker Vent - 2-3/8" x 6-3/4" Locker Vents are designed to promote air circulation in interior areas and prevent mold, mildew, and unpleasant odors. Easy to install with six #8 RH fasteners (not included). Corrosion resistant stamped 304 stainless steel construction. Vent area 2.56 in2. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Stainless Steel Drain Cover - 3-1/4" Stamped 304 Stainless SteelWARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Stainless Steel Round Louvered Vent - 5" Round Louvered Vents allow air in while keeping water out. Installs with four #6 FH fasteners (not included). Corrosion resistant stamped 304 stainless steel construction. Vent area 5” 2.02 in2.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Clam Shell Midget Vent 1-1/2" x 1-3/4" Material: 304 Stainless Steel Size: 1-1/2" x 1-3/4" Fastener: #6 (3)

Read more less

Stainless Steel Louvered Vent - 5" x 2-5/8" Louvered Vents are designed to promote air circulation and prevent mold, mildew, and unpleasant odors. Ideal for cabin doors, lockers, dock boxes, etc. Easy to install with six #6 RH fasteners (not included). Corrosion resistant stamped 304 stainless steel construction. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Stainless Steel Cowl Vent Cowl Vent provides fresh air below decks by trapping air that comes across the top deck and forcing it into your boat's cabin or interior. Stamped 304 stainless steel construction. Installs with four #8 FH fasteners (not included). WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Stainless Steel Butterfly Vent - Center Knob - 5" Butterfly Vents promote air flow preventing mold, mildew, and associated odors. Features a center knob that allows for easy adjustment of the opening. Corrosion resistant 304 stainless steel construction. Installs with four #6 RH fasteners (not included).WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Stainless Steel Midget Vent - Heavy Duty Heavy Duty Midget Vents feature a reinforced rim, making them durable enough to stand on. Great for routing cables or wires through a hole or for covering thru-hull openings to shield water spray. Ideal for small lockers, they provide attractive cover for ventilation holes while also preventing odors. Stamped 304 stainless steel construction. Easy to install with pre-drilled holes for three #6 RH fasteners (not included). WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Stainless Steel Louvered Vent - Oval - 9-1/8" x 4-5/8" Louvered Vents are designed to promote air circulation and prevent mold, mildew, and unpleasant odors. Ideal for cabin doors, lockers, dock boxes, etc. Easy to install with six #6 RH fasteners (not included). Corrosion resistant stamped 304 stainless steel construction. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Stainless Steel Flush Mount Gas Tank Vent 5/8" Hose - StraightThe Flush Mount Gas Tank Vent provides the needed air flow to maintain proper fuel flow while filling and during use. Vents compensate for changes in tank level due to consumption, as well as temperature related expansion and contraction. Designed to prevent vacuum build-up during use, which can disrupt fuel delivery they also double as a pressure release valve for the gas tank. Helps prevent fuel spills, blow-back, and ensures fumes vent outboard instead of inside the boat. An integral 5/8" hose barb securely connects vent hose. Constructed of corrosion resistant investment cast 316 stainless steel. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Stainless Steel Louvered Vent - 9-1/8" x 4-5/8" Louvered Vents are designed to promote air circulation and prevent mold, mildew, and unpleasant odors. Ideal for cabin doors, lockers, dock boxes, etc. Easy to install with six #6 RH fasteners (not included). Corrosion resistant stamped 304 stainless steel construction. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Clam Shell Midget Vent 2-1/4" x 2-1/4" Material: 304 Stainless Steel Size: 2-1/4" x 2-1/4" Fastener: #6 (3)

Read more less

Gas Tank Vent Chrome Plated Zinc Alloy with Black Polymer Splash Guard Removable 30 Mesh Stainless Steel Wire Screen Flame Arrestor - for use with fuel applications Hose Size: 5/8" Max Hull Thickness: 3/4"

Read more less

Clam Shell Ventilator - Chrome Plated Brass - 4" x 3-3/4"Specs: Chrome Plated Brass Dimensions Base: 4" x 3-3/4" Width Opening: 2-1/2" Height Opening: 1-5/8" Screw Size: #6

Read more less

90° P-Trap Fuel Tank Vent - Black with Stainless Steel Trim CoverComposite 90-degree P-trap fuel tank vent 66419-3. These vents help prevent water from entering the fuel tank, yet allow air to vent freely, during normal sea conditions and washdowns.  This eliminates the need for an anti-siphon loop in the vent hose.  Features: For 5/8" I.D. hose (inch) 3/4" install. hole size (inch) 9/16" max. hull thickness Vents air from your boat's fuel tank as you fill the fuel tank Splash-resistant, corrosion resistant Meets ABYC standard *Compatible with Ethanol blended fuels Quick Guide (pdf)

Read more less

MiniVent 1000 3" - WhiteThe MiniVent 1000 is the smallest and most economical solar vent in the Marinco line. At just 7" in diameter and approximately 1-3/4" high, the MiniVent 1000 is compact yet effective. This solar-powered model is an exhaust vent only. It will keep the boat cabin cool when you need it most, during the hot sunlight hours. Under solar power, the Mini Vent 1000 will move 700 cubic feet of air an hour. At night, even a light breeze will continue to ventilate the boat passively. Built-in shut-off damper prevents water intrusion in rough seas. Fits a 3-3/4" diameter installation hole. The vent can be retrofitted to an existing hole of up to 6" in diameter. Available in white ABS plastic or stainless steel. All MiniVent 1000 models come complete with a white plastic interior trim ring, mounting hardware, and an easy-to-understand installation manual.Features: Solar-powered exhaust ventilation during daylight and passive exhaust at night No batteries or wiring required Whisper-quiet fan operation Durable white ABS construction Shut off damper to prevent water intrusion in rough seas Dimensions: 7" diameter X 1-3/4" high

Read more less

Day/Night Solar Vent 4" - WhiteThe design threads into included deck plate, and is removable from the outside without tools. On/off fan switches, LED lights, and intake/exhaust switches are accessible from inside the cabin for ease of use.Features: Circulates fresh air in the boat cabin eliminating mold, mildew, and musty air Moves 1,000 cubic feet of air/hour or 24,000 cubic feet of air/day (4" model) A rechargeable battery allows for 24-hour continuous operation Whisper quiet fan operation No wiring required Built-in on/off fan switch, LED lights, and intake/exhaust switch High capacity NiMh battery operates vent for up to 24 hours without sunlight on a full charge Threads into included deck plate and can be removed from outside without tools Complete air and green water shut-off from below All Day/Night Plus models come complete with a white plastic interior trim ring, insect screen, mounting hardware, and an easy-to-understand installation manual Replaces NICRO 3" and 4" snap-in deck plates (fits existing holes once snap-in deck plates are removed) and Day/Night Plus, models Owner's Manual (pdf)Brochure (pdf)

Read more less

Stainless Steel Butterfly Vent - Center Knob - 4" Butterfly Vents promote air flow preventing mold, mildew, and associated odors. Features a center knob that allows for easy adjustment of the opening. Corrosion resistant 304 stainless steel construction. Installs with four #6 RH fasteners (not included). WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Stainless Steel Clam Shell Vent - Mini Mini Clam Shell Ventilators provide splash protection for vent holes, wires, cable runs, or blower-exhaust hose openings. Corrosion resistant 304 stamped stainless steel construction. Can be used for cabin ventilation with the addition of a dorade box. Clam Shell Vents are ideal for applications where a taller vent would foul lines or restrict crew movement. Easy to install with pre-drilled holes for five #6 RH fasteners (not included). WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Stainless Steel Louvered Vent - 5" x 9" Louvered Vents are designed to promote air circulation and prevent mold, mildew, and unpleasant odors. Ideal for cabin doors, lockers, dock boxes, etc. Easy to install with six #6 RH fasteners (not included). Corrosion resistant stamped 304 stainless steel construction. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Gas Vent w/Stainless Steel Screen

Read more less