Lighting - Accessories – REBELLION MARINE

Sale -$9.51

Quantity

Scandvik Scandvik 8" LED Light Strip - Blue w/Gasket - 12V [41645P]

8" LED Light Strip - Blue with Gasket - 12VThis is a multi-use 8" light. The heavy-duty polycarbonate housing offers robust protection from the elements. The light includes a molded rubber gasket that routes the hook-up wires (positive/negative) to one side of the fixture. Can also be installed without the gasket, with the hook-up wires routed straight back through the mounting surface. A diamond-cut lens disperses light evenly. A sealed fixture can be installed under gunnels, in lockers/closets, in consoles, in companionways, or for step illumination.Features: 12VDC, 3W 15 EA Blue 2835 LEDs IP67 *The "P" within the part number indicates retail packaging Specifications: Type: Lights Box Dimensions: 1"H x 2"W x 9"L WT: 0.1 lbs UPC: 786142416458

Read more less

$24.50 $14.99

Quantity
Sale -$12.01

Quantity

Scandvik Scandvik Scan-Strip Light - 8" - Blue [41347P]

Scan-Strip Light - 8" - BlueScan-Strip LED lighting is a quality product for marine or RV use.Features: 8 in. blue light in retail packaging Mount this scan strip light under gunwales, in storage lockers, coolers, fish boxes, and engine rooms Use the below deck in cabin areas for general lighting or courtesy lights *The "P" within the part number indicates retail packaging Specifications: Type: Lights Box Dimensions: 1"H x 4"W x 10"L WT: 0.15 lbs UPC: 786142413471

Read more less

$31.00 $18.99

Quantity
Sale -$68.00

Quantity

Lumitec Lumitec Pico S-8 Expansion Module [101684]

Pico S-8 Expansion ModulePico Expansion Modules extend the power and reach of the Poco Digital Lighting Control system making it possible to control other manufacturers’ luminaires, lighting accessories and devices that do not have the sophisticated PLI technology built-in. The Pico S8 module provides the ability to assign Poco virtual switch commands to physical mechanical switches (8 max). This means that your MFD can remain on a dedicated screen, or even be turned off, and a physical switch will activate the virtual switch command through the Poco module. Requires Poco 3 for compatibility (S8 module is not compatible with all earlier versions of the Poco module).

Read more less

$234.99 $166.99

Quantity
Sale -$2.00

Quantity

Attwood Marine Attwood Pole Light Storage Clips [7571L7]

Pole Light Storage Clips New design holds larger (3/4") diameter anti-glare pole lights. Resilient rubber clip holds standard 3/4"-diameter poles. Ideal for storing and protecting plug-in pole lights when mounted in engine wells or lockers. Installs with one #8 fastener.OEM Part Number 7571-1*Sold as a PairWARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Mounting Brackets Box Dimensions: 1"H x 3"W x 6"L WT: 0.1 lbs UPC: 022697757135

Read more less

$7.99 $5.99

Quantity
Quantity

Attwood Marine Attwood LightArmor Fast Action All-Round Plug-In Light - 42" [5530-42BP7]

LightArmor All-Round Plug-In Light - 42"Premium LED lights with a flexible, impact-resistant composite pole make these perfect for anglers and hunters to maneuver through low-hanging obstacles. The subtle, glare-free black matte finish complements many of today's boat designs.The threaded locking collar fits securely with LightArmor Plug-In Light Bases. OEM Part Number 5530-42BP1Features: Impact-resistant polycarbonate lens Water-resistant Corrosion/UV resistant The light head adjusts 15° fore to 15° aft Over 50,000-hour life Technical Specifications: Visibility Distance - 2NM Visibility Field of View - 360° Vessel Size - Up to 39.4' (12 M) Connection - Standard 2-Pin Pole Length - 42" Operating Range - 10.5 to 14.4V DC Certifications:U.S.C.G.*Sold as an Individual

Read more less

$56.99

Quantity
Sale -$98.00

Quantity

Lumitec Lumitec Poco Digital Lighting Control 3.0 [101699]

Poco Digital Lighting Control 3.0Poco Digital Lighting Control is a low-cost, easy-to-install, and set up onboard digital lighting control system that offers full dimming and color control over all your Lumitec PLI-enabled lights at the touch of a button via any compatible MFD or connected smart device. Poco 3.0 adds enhanced wireless security, an external API for compatibility with networked third-party automation systems, and a "Triggers" feature which allows for the triggering of Poco virtual switches by external inputs - all packaged within a responsive user interface for better mobile device usability.Features: PWR: Positive 10-30 VDC POCO supply power. Line must be fused prior to connecting to POCO with 3 Amp ATC blade fuse or equivalent (Constant ON or Switched with ACC Line) GRND: Negative 10-30 VDC POCO supply power ACC: Positive 10-30 VDC, Low current enable line to turn POCO on from remote device (i.e. MFD) (Must be powered to enable Poco) 1-4 IN: Channel Input power. Line must be fused prior to connecting to POCO with 10 Amp ATC blade fuse or equivalent (14 AWG 300V 16 inch long cable) 1-4 OUT: Channel Output power to the lighting circuit. Maximum 10 Amp load per channel. The maximum total load across all channels is limited to 40 Amps. Load on the channel must be only one of the following (Lumitec PLI enabled lighting/lighting capable of dimming (through PWM) / device requiring a standard ON-OFF circuit) (14 AWG 300V 16 inch long cable) LAN: Local Area Network connection. 10/100 Base T data connection to POCO. Standard CAT-5 cable with RJ45 connector required to plug into sealed network cable adapter. (18 inch long cable with Link light) POWER: Indicator - Illuminates Green if POCO is powered on, both PWR and ACC lines must have supply voltage between 10 and 30 VDC CH1-4: Indicator - Illuminates Red if power is supplied to Channel from fuse/breaker panel: - Illuminates Green if power is supplied to Channel input and the channel is turned on inside of POCO controller; PLI enabled lights may be OFF: - Flashes Orange if PLI data is transmitted: - Illuminates Orange if the channel is dimmed through a PWM signal. STATUS: Green blinking light indicates WiFi connection status: - 0 blinks: WiFi disabled - 1 blink: WiFi-enabled but not connected to any peers - 2 blinks: WiFi is connected to one or more peers Blue blinking light indicates Bluetooth-LE connection status: - 0 blinks: Bluetooth-LE is disabled - 1 blink: Bluetooth-LE enabled but not connected - 2 blinks: Bluetooth-LE is connected Quick Guide (pdf)Owner's Manual (pdf)

Read more less

$383.99 $285.99

Quantity
Sale -$24.96

Quantity

Forespar Performance Products Forespar Mast Light Guard [132200]

Mast Light GuardKeeps lines from snagging while protecting fittings.Features: Height - 6 1/2 inches Width - 5 inches Length - 6 inches

Read more less

$80.95 $55.99

Quantity
Sale -$9.96

Quantity

ACR Electronics ACR HRMK1503 Planet Gear f/RCL-100 Series Searchlights [HRMK1503]

HRMK1503 Planet Gear for RCL-100 Series Searchlights Replacement planet gear. Compatible With:RCL-100 series of searchlights*Sold as an individual WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Parts Box Dimensions: 1"H x 1"W x 1"L WT: 0.01 lbs UPC: 4781612022210 Owner's Manual (pdf)

Read more less

$35.95 $25.99

Quantity
Quantity

RIGID Industries RIGID Industries D-SS Series Lens Cover - Yellow [32183]

D-SS Series Lens Cover - YellowRIGID light covers are the perfect solution for style and function. Give your vehicle a unique look while also protecting your investment. These light covers are made from a durable polycarbonate plastic that offers an extra layer of protection for the lens of your LED light. These covers snap on and off, so swapping them out is simple and easy. They are also perfect for states that require covers on accessory lights.Features: Easy to Snap On & Off, Polycarbonate Plastic Extra Layer of Protection ∗ Sold as an Individual

Read more less

$17.99

Quantity
Sale -$9.51

Quantity

Scandvik Scandvik 8" LED Light Strip - White w/Gasket - 12V [41644P]

8" LED Light Strip - White with Gasket - 12VThis is a multi-use 8" light. The heavy-duty polycarbonate housing offers robust protection from the elements. The light includes a molded rubber gasket that routes the hook-up wires (positive/negative) to one side of the fixture. Can also be installed without the gasket, with the hook-up wires routed straight back through the mounting surface. A diamond-cut lens disperses light evenly. A sealed fixture can be installed under gunnels, in lockers/closets, in consoles, in companionways, or for step illumination.Features: 12VDC, 3W 15 EA 2835 LEDs Daylight white (4500K) IP67 Specifications:Lumens: 176*The "P" within the part number indicates retail packaging Specifications: Type: Lights Box Dimensions: 1"H x 2"W x 9"L WT: 0.1 lbs UPC: 786142416441

Read more less

$24.50 $14.99

Quantity
Sale -$14.51

Quantity

Scandvik Scandvik 8" Scan-Strip 4 Color LED Light - RGBW [41650P]

8" Scan-Strip 4 Color LED Light - RGBWThis 4-color scan-strip RGBW LED builds on the popularity of the original single-color scan-strip LED. Simple 2-wire connections with any on/off switch are all that is required to cycle from white to blue to red to green.Features: Switching off for more than 4 seconds resets the color to white RGBW LEDs Colors are daylight white (4000-4500K), blue, red, green Lifespan 30,000+ Hours 12/24 Volt IP65 can be installed in engine rooms and exterior locations Ideal for under-gunwale lighting SS Mounting Screws Included Specifications: Beam Angle: 120° Watts: 1.2 Lumens: 94 Dimensions (L X W x H) (inch): 8-7/8" x 7/8" x 1/2" *The "P" within the part number indicates retail packaging Specifications: Type: Lights Box Dimensions: 1"H x 4"W x 10"L WT: 0.15 lbs UPC: 786142416502

Read more less

$36.50 $21.99

Quantity
Sale -$6.51

Quantity

Scandvik Scandvik 4" LED Light Strip - White w/Gasket - 12V [41640P]

4" LED Light Strip - White with Gasket - 12VThis is a multi-use 4" light. The heavy-duty polycarbonate housing offers robust protection from the elements. The light includes a molded rubber gasket that routes the hook-up wires (positive/negative) to one side of the fixture. Can also be installed without the gasket, with the hook-up wires routed straight back through the mounting surface. A diamond-cut lens disperses light evenly. A sealed fixture can be installed under gunnels, in lockers/closets, in consoles, in companion ways, or for step illumination.Features: 12VDC, 1.2W 6 EA 2835 LEDs Daylight white (4500K) IP67 *The "P" within the part number indicates retail packaging Specifications: Type: Lights Box Dimensions: 1"H x 2"W x 5"L WT: 0.05 lbs UPC: 786142416403

Read more less

$17.50 $10.99

Quantity
Sale -$21.01

Quantity

Scandvik Scandvik 16" Scan-Strip 4 Color LED Light - RGBW [41651P]

16" Scan-Strip 4 Color LED Light - RGBWThis 4-color scan-strip RGBW LED builds on the popularity of the original single-color scan-strip LED. Simple 2-wire connections with any on/off switch are all that is required to cycle from white to blue to red to green.Features: Switching off for more than 4 seconds resets the color to white RGBW LEDs Colors are daylight white (4000-4500K), blue, red, green Lifespan 30,000+ Hours 12/24 Volt IP65 can be installed in engine rooms and exterior locations Ideal for under-gunwale lighting SS Mounting Screws Included Specifications: Beam Angle: 120° Watts: 2.4 Lumens: 180 Dimensions (L X W x H) (inch): 16" x 7/8" x 1/2" *The "P" within the part number indicates retail packaging Specifications: Type: Lights Box Dimensions: 1"H x 4"W x 17"L WT: 0.2 lbs UPC: 786142416519

Read more less

$53.00 $31.99

Quantity
Sale -$8.00

Quantity

Navisafe Navisafe Navimount RIB Self-Adhesive Mount f/Inflatable - Black [955-1]

Navimount RIB Self-Adhesive Mount for Inflatable - BlackFeatures: The Navimount RIB is designed to securely attach the Navilights with Magnetic base, Navimount base or Suction base to the tube of inflatable boats. Navilight models 001, 010, 040, 305, 340 require in addition the Navisafe converter Navimount / 960 Navilight models 041 and 341 do not require additional converters and can be mounted directly Includes:"3M" self-adhesive sticker working on boats made from Hypalon, Polyethylene or PVC. Specifications: Type: Mounting Brackets Box Dimensions: 2"H x 4"W x 7"L WT: 0.4 lbs UPC: 814154018985

Read more less

$26.99 $18.99

Quantity
Quantity

RIGID Industries RIGID Industries 12V Relay [49012]

12V RelayFeatures:RIGID Industries Relay12V

Read more less

$33.99

Quantity
Sale -$25.00

Quantity

Golight Golight Stryker ST Series Extension Cable - 20' [ST-3020-20]

Stryker ST Series Extension Cable - 20'Golight's extension cable is specifically made for Golight's ST Series.Specifications:Cable Length: 20'

Read more less

$89.99 $64.99

Quantity
Sale -$11.00

Quantity

Lunasea Lighting Lunasea Tri/Anchor/Flash Fixture Switch [LLB-53SW-81-00]

Tri/Anchor/Flash Fixture SwitchConvenient Switch for Tri Color Nav Fixture. Conveniently shows what the Tri Color Fixture mode is in. Easy to hook up with push connectors.Features: Visual LED indicators Solid Metal Plate Easy Connect push connectors Specifications: Input Voltage: 12 VDC Systems Warranty: 3-Year Specifications: Type: Lights Box Dimensions: "H x 7"W x 8"L WT: 0.2 lbs UPC: 850001461535 Brochure (pdf)

Read more less

$59.99 $48.99

Quantity
Sale -$2.00

Quantity

RIGID Industries RIGID Industries 3 Position Rocker Switch - Red [40181]

3 Position Rocker Switch - RedThis three (3) position switch features a lighted cherry rocker with a protective rubber boot and is a great addition to any RIGID lighting system. This position switch allows for ON, OFF, or Auto when in Reverse. This product requires a 1" hole to mount.∗ Sold as an Individual

Read more less

$24.99 $22.99

Quantity
Sale -$87.96

Quantity

ACR Electronics ACR HRMK1304 Socket Assembly #21-T f/RCL-100 Series Searchlights [HRMK1304]

HRMK1304 Socket Assembly #21-T for RCL-100 Series Searchlights Replacement lamp socket assembly #21-T.Compatible With:RCL-100 series of searchlights*Sold as an individual WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Parts Box Dimensions: 2"H x 3"W x 5"L WT: 0.05 lbs Owner's Manual (pdf)

Read more less

$279.95 $191.99

Quantity
Sale -$29.96

Quantity

ACR Electronics ACR Standard Wireless Remote f/ACR Searchlights [9636]

Standard Wireless Remote for ACR Searchlights Enjoy the convenience of controlling your RCL-85 or RCL-95 searchlight with either the Wireless Handheld Remote. The remote is waterproof, fits comfortably in your hand, and enables simple intuitive control of your searchlight. It operates on the 433.92 MHz frequency and offers an impressive remote operation distance of 213' (65 m).In addition to directional control of the searchlight, the remote also allows users to turn the searchlight strobe function on and off. Syncing the remote to your searchlight is a simple process and up to a total of 4 remotes (handheld wireless remotes and/or dash mount wireless remotes) can be synced to one searchlight.Compatible With:ACR RCL-85 adn RCL-95 model searchlightsFeatures: Compact and water-resistant Operation distance of 213' (65 m) Allows for directional control and on/off functionality Sync up to 4 remotes with a single searchlight *Sold as an Individual WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Owner's Manual (pdf)

Read more less

$89.95 $59.99

Quantity
Sale -$7.00

Quantity

Navisafe Navisafe Navimount Rail Mount Black w/Screws [957-1]

Navimount Rail Mount Black with ScrewsFeatures: The Navimount RAIL mount is designed to attach the Navilights with Magnetic base, Navimount base or Suction base onto any 25 or 35mm / 1" or 1-1/4" rail. Navilight models 001, 010, 040, 305, 340 require in addition the Navisafe converter Navimount / 960 Navilight models 041 and 341 do not require additional converters and can be mounted directly Specifications: Type: Mounting Brackets Box Dimensions: 3"H x 3"W x 5"L WT: 0.3 lbs UPC: 7332640013991

Read more less

$24.99 $17.99

Quantity
Sale -$4.00

Quantity

Attwood Marine Attwood Oval 2-Pin Base f/Angled Pole - Black [91022-7]

Oval 2-Pin Base f/Angled Pole - BlackPart #: 91022-7These 2-pin bases for angled pole lights with locking collars are well-suited for rough conditions or long poles. Features a soft rubber cover with a molded-in gasket to protect the socket from moisture and debris when pole light is stowed away. Provides a 2-pin socket and a 7.5 degree angle and installs on narrow gunwales or deck areas. Completely non-corrosive, they feature contacts which are nickel-plated to resist corrosion and multi-crimped for durability, and wire leads tinned for corrosion resistance.Features: Oval 2-Pin Base specifically for angled pole Black WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Quick Guide (pdf)

Read more less

$16.99 $12.99

Quantity
Sale -$7.01

Quantity

Black Oak LED Black Oak Horizontal Bracket 1" - Individual [HB100]

Horizontal Bracket 1" - IndividualThe horizontal ATV light bar mount is perfect for adding your Black Oak LED pod lights on any circular surface. This mounting point is designed specifically for our LED POD lights which use an 8m bolt. Whether you're mounting lights on a front bumper or roll bar of your UTV, this tube mounting bracket is a perfect solution for a clean and easy install.

Read more less

$45.00 $37.99

Quantity
Sale -$43.01

Quantity

I2Systems Inc i2Systems LightLink Marine Dimming Module [LL-101]

LightLink LL-101 Marine Dimming ModulePart #: LL-101Operation is simple! Press and hold the momentary switch to initiate dimming cycle. Dimming cycle continues to dim as long as switch is engaged, ranging from 100% to approximately 5% intensity holding 2 seconds at each position before dimming the opposite direction. Briefly press and release momentary switch for on/off operation.Specifications: Input Voltage: 6-36 Volt DC Dimensions: Width: 1.5" x Height: 0.5" x Depth: 1.0" Features: Compatible with i2Systems Apeiron, Ember and Profile lights Dimming control via a momentary switch or contact Small size, encapsulated, fits into most switch boxes The LL-101 means that no matter what level you have the lights at when you turn them off, they will resume at full brightness when turned back on. The LightLink LL-101 is capable of dimming and controlling up to (20) i2Systems Fixtures, including: Apeiron A1110 Apeiron A2162 Ember E1150 Profile P1100 (20') i2SystemsS-Line S1200 Specifications: Type: Parts Box Dimensions: 2"H x 4"W x 4"L WT: 0.4 lbs Quick Guide (pdf)

Read more less

$122.00 $78.99

Quantity
Sale -$25.96

Quantity

ACR Electronics ACR Extension Cable f/RCL-95 Searchlight - 5M [9638]

Extension Cable for RCL-95 Searchlight - 5MACR's Extension Cable extends the wiring for the Dash Mount Point Pad™ by 16.4' (5 M).Compatible With: ACR Dash Mount Point Pad™ Controller ACR RCL-95 Searchlights *Sold as an Individual WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Parts Box Dimensions: 2"H x 6"W x 7"L WT: 0.75 lbs UPC: 791659096383

Read more less

$72.95 $46.99

Quantity
Sale -$9.30

Quantity

Black Oak LED Black Oak RGB Controller [RGB-C]

RGB Controller Get the most out of RGB lights, whether Black Oak's marine RGB accent lights or another brand, using Black Oak's thoroughly tested RGB Controller. Giving users the option to select and cycle through nearly endless color options. Mount the module in a secure place in the console, glove compartment, or another secure location, and enjoy the ease of use of the handheld controller.Features:Run up to 15 of our RGB accent lights off one controllerSpecifications: Product Dimensions (L x W x H): 3.1875” x 2.5” x 0.875” Distance between Mounting Tab Holes: 2.75” Input Voltage: 12v-24v Controller Battery: CR2025-CR2032 In the box: RGB Module Wireless controller Specifications: Type: Parts Box Dimensions: 2"H x 3"W x 6"L WT: 0.3 lbs UPC: 850044517367

Read more less

$62.00 $52.70

Quantity
Quantity

RIGID Industries RIGID Industries D-Series Lens Cover - Black [201913]

D-Series Lens Cover - BlackRIGID light covers are the perfect solution for style and function. Give your vehicle a unique look while also protecting your investment. These light covers are made from a durable polycarbonate plastic that offers an extra layer of protection for the lens of your LED light. These covers snap on and off, so swapping them out is simple and easy. They are also perfect for states that require covers on accessory lights. Features: Easy to Snap On & Off Polycarbonate Plastic Extra Layer of Protection

Read more less

$13.99

Quantity
Quantity

RIGID Industries RIGID Industries D-Series Lens Cover - Yellow [201933]

D-Series Lens Cover - YellowRIGID light covers are the perfect solution for style and function. Give your vehicle a unique look while also protecting your investment. These light covers are made from a durable polycarbonate plastic that offers an extra layer of protection for the lens of your LED light. These covers snap on and off, so swapping them out is simple and easy. They are also perfect for states that require covers on accessory lights. Features: Easy to Snap On & Off Polycarbonate Plastic Extra Layer of Protection

Read more less

$13.99

Quantity
Sale -$5.00

Quantity

RIGID Industries RIGID Industries Harness f/ 3 Wire - Pair Lights [36360]

Harness for 3 Wire - Pair LightsRIGID’s 10’ (3.05 meter) wiring harness is designed to connect 1 pair of lights to your 12V electrical system. It features battery terminal connectors, a 3-position switch (on/off/backlight only on), fuse holder with 20 Amp fuse and 60 Amp 14V DC relay. This wiring harness is designed with flying leads for universal fitment. This harness is compatible with the Adapt XP and 360-Series 4” and 6” family. Not for SAE versions. ∗ Sold as an Individual Specifications: Type: Electric Box Dimensions: 2"H x 8"W x 9"L WT: 1.5 lbs UPC: 815711010305

Read more less

$114.99 $109.99

Quantity
Quantity

RIGID Industries RIGID Industries E-Series, RDS-Series Radiance+ Lens Cover 10" - Yellow [110933]

E-Series, RDS-Series & Radiance+ Lens Cover 10" - YellowRIGID light covers are the perfect solution for style and function. Give your vehicle a unique look while also protecting your investment. These light covers are made from a durable polycarbonate plastic that offers an extra layer of protection for the lens of your LED light. These covers snap on and off, so swapping them out is simple and easy. They are also perfect for states that require covers on accessory lights. Features: Easy to Snap On & Off Polycarbonate Plastic Extra Layer of Protection

Read more less

$20.99

Quantity
Sale -$5.79

Quantity

Hella Marine Hella Marine NaviLED PRO Deck Mount Adapter - White [241287812]

NaviLED PRO Deck Mount Adapter - WhiteThe NaviLED PRO series of navigation lamps have been the preferred choice of commercial and large recreational vessels for over a decade. The Horizontal Deck Mount Adapter accessory increases the installation flexibility of the NaviLED PRO range. Now the lamps can be mounted on horizontal surfaces, expanding the mounting options and catering to customers with larger vessels.Features: Mount NaviLED PRO lamps on horizontal surfaces Fits existing product range including Port, Starboard, Stern, Masthead, Bi-color Increases physical dimensions for larger vessels Innovative design hides fastenings Space for cable gland beneath the adapter UV and impact resistant material In addition to the increased mounting configurations, large vessels often prefer a larger fitting to match proportionately with the size of the boat. This adapter increases the physical appearance of the lamp by 50%.The Horizontal Deck Mount Adapter is ideal when retrofitting old incandescent lamps that were often deck-mounted designs, and caters for both rear and bottom exit cabling.The option of either black or white matches the NaviLED Pro offerings to complement the installed appearance.*Please note: Lamp is not supplied with the Adapter Specifications: Type: Adapters Box Dimensions: 4"H x 6"W x 11"L WT: 0.5 lbs UPC: 9416325247876

Read more less

$17.78 $11.99

Quantity
Sale -$19.72

Quantity

Perko Perko Mini Mount Plug-In Type Base - 2 Pin - Black [1049P00DPB]

Mini Mount Plug-In Type Base(1049) Plain Black Cap Insert and Waterproof Snap-On Cover Black Plastic Base Pigtail Leads Cap Type Black# of Pins 2O.D. Base Dims 1-15/16Fits Figs. 1401, 1441, and 1461 Series All-Round Pole Lights and 1614 Series Bi-Color Pole Lights Quick Guide (pdf)

Read more less

$52.71 $32.99

Quantity
Quantity

RIGID Industries RIGID Industries E-Series, RDS-Series Radiance+ Lens Cover 10" - Black [110913]

E-Series, RDS-Series & Radiance+ Lens Cover 10" - BlackRIGID light covers are the perfect solution for style and function. Give your vehicle a unique look while also protecting your investment. These light covers are made from a durable polycarbonate plastic that offers an extra layer of protection for the lens of your LED light. These covers snap on and off, so swapping them out is simple and easy. They are also perfect for states that require covers on accessory lights. Features: Easy to Snap On & Off Polycarbonate Plastic Extra Layer of Protection

Read more less

$20.99

Quantity
Sale -$35.73

Quantity

Perko Perko Medium Prefocus Socket [0895]

Medium Prefocus SocketReplacement Socket for 0800 Series and 1900 Series Solar-Ray® Searchlights.Specifications:Socket Code: E

Read more less

$165.72 $129.99

Quantity
Sale -$33.01

Quantity

Metro Marine Metro Marine Full Spectrum Hub - 2 Outputs [F-HB-2-FS5]

Full Spectrum Hub - 2 OutputsOur F-HB-2-FS5 Hub simplifies installation allowing for 2 RGBW fixtures to be connected to one power source. It also allows you to daisy-chain the data signal between those 2 fixtures, as well as between additional fixtures on other hubs. Features: ABYC Compliant IP68 & IPX8 Tested

Read more less

$150.00 $116.99

Quantity
Sale -$8.00

Quantity

Navisafe Navisafe Navimount RIB Self-Adhesive Mount f/Inflatables - White [954-1]

Navimount RIB Self-Adhesive Mount for Inflatables - WhiteWorks with Navilights with magnet or Navimount mounting system. Mounts to bow of inflatable. Includes self-adhesive sticker that works on boats made of Hypalon, Polyethylene or PVC.Use #960 converter for #001, 010, 041, 305 & 341 lights. #040 & 340 do not require converters. Replaces old #525. Specifications: Type: Mounting Brackets Housing: White Box Dimensions: 2"H x 3"W x 5"L WT: 0.3 lbs UPC: 814154018718

Read more less

$26.99 $18.99

Quantity
Sale -$1.26

Quantity

Golight Golight Wireless Dash Mounted Remote [30200]

Wireless Dash Mount RemoteOptional wireless dash mount remote compatable with all wireless lights in the Golight, RadioRay, Stryker, and Gobee models.Remote cannot be added to lights that came standard with only "wired" remotes.

Read more less

$58.25 $56.99

Quantity
Sale -$4.00

Quantity

Golight Golight Remote Holster f/Wireless Handheld Remote [30111]

Remote Holster for Wireless Handheld RemoteWireless Hand Held Remote Holster by Golight. This product is compatible with 30100 and 30300 wireless hand-held remote controls.

Read more less

$9.99 $5.99

Quantity
Sale -$1.13

Quantity

Golight Golight Wireless Handheld Remote [30100]

Wireless Hand Held RemoteOptional wireless hand held remote compatable with all wireless lights in the Golight, RadioRay, Stryker, and Gobee models.Remote cannot be added to lights that came standard with only "wired" remotes.

Read more less

$47.12 $45.99

Quantity
Sale -$0.84

Quantity

Golight Golight Wireless Handheld Remote f/Stryker ST Only [30300]

reless Handheld Remote for Stryker ST OnlyThe Stryker ST’s remote-control unit is as simple to operate as it is intelligent. Large buttons are easy to access even with gloved hands, and fluorescent iconography makes the controller buttons legible in dark or low-light conditions. Now powered by two regular AAA batteries, the controller is more convenient to maintain than ever. The new Stryker ST lets users pan and tilt simultaneously. It also comes with a unit selector function that enables a user to operate two Stryker STs individually or in synchronisation, using a single remote-control transmitter.

Read more less

$52.83 $51.99

Quantity
Sale -$44.01

Quantity

Metro Marine Metro Marine Single Color Hub - 4 Outputs [F-HB-4-MC3]

Single Color Hub - 4 OutputsOur F-HB-4-MC3 Hub simplifies installation allowing for 4 Single Color fixtures to be connected to one power source. It also allows you to daisy-chain the data signal between those 4 fixtures, as well as between additional fixtures on other hubs. Features: ABYC Compliant IP68 & IPX8 Tested

Read more less

$196.00 $151.99

Quantity
Sale -$45.99

Quantity

Shadow-Caster LED Lighting Shadow-Caster Multi-Zone Lighting Controller Kit [SCM-ZC-KIT]

Multi-Zone Lighting Controller KitThe Shadow-Caster Zone Controller allows a user the ability to seamlessly control up to 4 zones of lighting independently, or synchronize zones together for a clean, uniform look. Easily switch colors, adjust brightness, or synchronize lights with music. The SCM-ZC-Kit comes with a remote push button head unit for easy push-button control. Features: Control Up to 4 Zones of Standard 4-wire RGB+ or Shadow-Caster Lights Quickly Adjust and Change Color and Brightness of Connected Lights Control Multiple Configurations of Color-Changing Patterns and Modes Includes 3.5 mm Audio Input for easy Lights and Music Synchronization Supports Up to 500 Watts of RGB Lighting Includes IP65-Rated Push-Button Head Unit 2-Year Warranty

Read more less

$574.99 $529.00

Quantity
Sale -$18.96

Quantity

ACR Electronics ACR Mounting Plate f/RCL-95 Searchlight [9639]

Mounting Plate for RCL-95 SearchlightThe RCL-95 mounting plate included in this kit features multiple mounting hole patterns that enable a seamless switch to a RCL-95 searchlight. No additional mounting holes are required.Compatible With: GOLIGHT® Stryker or RadioRay searchlights with the ACR RCL-95 Searchlight. Note - This kit will not work for the RadioRay portable version.*Sold as an Individual WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Parts Box Dimensions: 2"H x 7"W x 7"L WT: 0.45 lbs UPC: 791659096390

Read more less

$51.95 $32.99

Quantity
Sale -$2.00

Quantity

Golight Golight Snap-On Rockguard Lens Cover f/GT Series Halogen Lights - White [15304]

Snap-On Rockguard Lens Cover for GT Series Halogen Lights - WhiteSnap-on Rockguard lens cover for halogen units. This is not a universal part. Please verify the model number listed before ordering.Compatible With Current Golight GT Models: 2000GT 2051GT 2020GT 2021GT 2007GT 2057GT 7901GT 7951GT 7900GT Previous Golight/Radioray Models: 2000 2051 2020 2021 2007 2057 7901 7951 7900 5149

Read more less

$9.99 $7.99

Quantity
Sale -$6.00

Quantity

RIGID Industries RIGID Industries Wire Harness f/4"-6" Light Bar [40194]

Wire Harness f/4"-6" Light BarThis 11' wiring harness is designed to connect a single LED light to your 12V electrical system. It features battery terminals on one end and a Deutsch connector on the other to connect to the light. It incorporates an inline fuse holder, and a waterproof switch. This harness is compatible with the following RIGID Industries LED Lights: Dually (Single), D2 (Single), 4" E-Series, 6" E-Series, 4" SR-Series, 6" SR-Series.Features: 18 AWG Wire Deutsch Connector Inline Fuse Holder

Read more less

$45.99 $39.99

Quantity
Sale -$25.99

Quantity

Shadow-Caster LED Lighting Shadow-Caster 4-Channel Underwater Light Relay Module [SCM-PD4CH]

4-Channel Underwater Light Relay Module The SCM-PD4CH is a 4-position power distribution box that provides a convenient way to connect up to 4 Shadow-Caster™ underwater lights. Digital over-current protection for each output ensures the safe operation of multiple lights and provides an easy way to manage the relatively high current switching needs of multiple light installations.The SCM-PD4CH is housed in a compact waterproof box that is ideal for mounting in the bilge and wet locations.Features: Compact remote power control box Green/red LED indicates the status of each output channel Individual digital over-current protection for each channel Compatible with Shadow-Caster™ single and multi-color lights Recommended when installing two or more underwater lights Can be used with a helm-mounted switch or with no switch when using a compatible Shadow-Caster™ controller Blue Shadow-Caster™ backlight indicates the state 3-Year Warranty Specifications: Compatible with 12 or 24V systems Up to 10 amps per channel 5/16-18” power lugs IP67 wash down rated enclosure What's Included? 4 position power control box Mounting hardware 4 #8 PH SS x.5” Quick Guide (pdf)

Read more less

$274.99 $249.00

Quantity
Sale -$4.00

Quantity

Navisafe Navisafe Navimount Vertical White w/Screws [950-1]

Navimount Vertical White with ScrewsIncludes:2 self-tapping stainless steel screwsUse #960 converter for #001, 010, 305 and 341 lights. #950 replaces old #526 Specifications: Housing: White Type: Mounting Brackets Box Dimensions: 2"H x 3"W x 5"L WT: 0.2 lbs UPC: 7332640013922

Read more less

$15.99 $11.99

Quantity
Quantity

RIGID Industries RIGID Industries D-XL Series Cover - Black [321913]

D-XL Series Cover - BlackRIGID light covers are the perfect solution for style and function. Give your vehicle a unique look while also protecting your investment. These light covers are made from durable polycarbonate plastic that offers an extra layer of protection for the lens of your LED light. These covers snap on and off, so swapping them out is simple and easy. They are also perfect for states that require covers on accessory lights. Features: Color - Black Easy to Snap On & Off Polycarbonate Plastic Extra Layer of Protection Fits D-XL Series and Radiance XL series lights Dimensions - 4" x 4" *Sold as an Individual Specifications: Type: Covers Box Dimensions: 1"H x 5"W x 7"L WT: 0.1 lbs UPC: 849774026461

Read more less

$18.99

Quantity