3/4" x 12" Threaded Aluminum Pipe12" length of threaded, bright anodized, 3/4" aluminum pipe for antenna standoff. Threaded all the way through with 7/8-14 thread so it can be cut to length.Specifications: Length: 12" Thread: 7/8-14 Bright anodized Aluminum Pipe: 3/4"

Read more less

Safety Pin for TR7 -  5/8" ShackleFeatures: Hitch pin lock for device locking safety Computer generated parts precision-cut from aerospace grade stainless steel plate Low friction, low effort lanyard-style release for maximum user safety All parts 100% stainless steel WARNING: This product can expose you to chemicals including Titanium dioxide which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

Read more less

Mechanical Hatchlifter 12" STK FastThe AV hatch lifters are electromechanical products, especially designed for marine use on pleasure boats. They allow full or partial opening and closing of heavy engine hatches, peak tanks, hatch beams etc. By activating a switch, it is possible to lift the hatch to any desired position from closed to full open; an internal self-locking mechanism will maintain the position preventing any accidental hatch closing. In case of a power failure, an emergency device allows for manual opening.The Uflex AV hatch lifters do not require any maintenance, are easy to install, and are made of materials resistant.Features: According to the load required, the AV hatch lifter can be mounted individually, or in twin-cylinder installations for heavier loads. It is also possible to install more than two AV actuators in multiple applications.  Maximum load for single installations: 1200N (120 kg - 265 lbs)  Maximum load for dual installations: 2400N (240 kg - 529 lbs)  Maximum load is recommended not to be exceeded.  Supplied with all mounting hardware.  Stainless steel telescopic ram for manual operation in case of emergency.  Available on request without a manual emergency opening device for high-performance boats.  Circuit breaker to stop accidental overloading of the system and electronic stop at the closed or fully open position.  IP 65 protection rated  Speed: 25mm/sec no load applied, 17 mm/sec maximum load  Current absorption in single installations: 10A at 12V, 5A at 24V  Current absorption in dual installations: 20A at 12V, 10A at 24V  AV 12VDC models are Ignition Protected. UL1500 - ISO8846 approved. Specifications: Volt: 12V DC Stroke: 300mm (12") Length A (full closed actuator): 677 mm (26.6") Ø External: 48 mm (1.9")

Read more less

TR3 Spring Loaded Safety Pin - 1/4" ShackleFeatures: Hitch pin lock for device locking safety Computer generated parts precision-cut from aerospace grade stainless steel plate Low friction, low effort lanyard-style release for maximum user safety All parts 100% stainless steel WARNING: This product can expose you to chemicals including Titanium dioxide which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

Read more less

Anchor Hanger for Danforth Style AnchorsFeatures: Pulpit Mount Anchor Hanger Works with Danforth Style Fluke Anchors from 8 lbs to 22 lbs with Stock diameters of 1/2" (12mm) to 3/4" (19mm) 316 Highly Polished Stainless Steel Easy clamp on installation to 1" tubing includes vinyl liner to protect finish Weight 13 oz (369g)

Read more less

Folding Ladder - 5 Step These Portable Emergency Boarding Ladders are made of molded-in, high-visibility orange polycarbonate with nylon rope supporting the frame. They secure quickly to cleats, railings, stanchions and halyards and will support up to 300 pounds.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Step Count: 5 Step Construction: Plastic Box Dimensions: 4"H x 9"W x 14"L WT: 2.5 lbs UPC: 035514582094

Read more less

Stainless Steel Release Pin 1/4” x 1-1/2”Standard-duty detent release pins are ideal for basic holding and removal applications that don't require a positive locking ball feature. These quick-release pins are activated by a push or pull motion. The detent ball depresses and springs up for "quick release" applications. This robust, durable design is suitable for repetitive-use applications. Ideal for anchor clevis fittings, hinge pins, or to replace cotter pins where frequent removal is necessary.Features: Includes a split ring for attachment of an optional lanyard Constructed of corrosion-resistant 304 stainless steel Specifications: Pin Length (up to the split ring): 1-1/2” Pin Width: 1/4” Split Ring Diameter: 1” WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Folding Ladder - 3 Step These Portable Emergency Boarding Ladders are made of molded-in, high-visibility orange polycarbonate with nylon rope supporting the frame. They secure quickly to cleats, railings, stanchions and halyards and will support up to 300 pounds.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Step Count: 3 Step Construction: Plastic Box Dimensions: 4"H x 10"W x 13"L WT: 1.55 lbs UPC: 035514582117

Read more less

Folding Ladder - 4 Step These Portable Emergency Boarding Ladders are made of molded-in, high-visibility orange polycarbonate with nylon rope supporting the frame. They secure quickly to cleats, railings, stanchions and halyards and will support up to 300 pounds.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Step Count: 4 Step Construction: Plastic Box Dimensions: 4"H x 10"W x 13"L WT: 2 lbs UPC: 035514582100

Read more less

3-Step Telescoping Swim LadderFeatures: 304 Stainless Steel with plastic treads Includes mounting hardware 1" diameter tubing 3 Steps Telescopes for compact storage on top of platform Velcro hold down strap No Platform Included Extended: 35-1/2"L x 11"W Collapsed: 14-3/4"L x 11"W

Read more less

4-Step Telescoping Swim LadderFeatures: 304 Stainless Steel with plastic treads Includes mounting hardware 1" diameter tubing 4 Steps Telescopes for compact storage on top of platform Velcro hold down strap No Platform Included Extended: 45-3/4"L x 11"W Collapsed: 15-1/2"L x 11"W

Read more less

Backing Plate for F16-0080 Dimensions: 2-1/2"W x 4"H x 5/32"D Screw: #10 flat head / 1/4" hole This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

Stainless Steel Deck Step 2-1/4" x 8-3/8"Injection Molded Rubber/Stamped 304 Stainless SteelThese Deck Steps are lined with injection molded rubber to facilitate traction. Constructed of corrosion resistant stamped 304 stainless steel. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Sand Cast Brass Chrome Plated Folding StepThis Folding Step has a patterned, texture finish for better traction. The spring loaded folding mechanism will keep the step in the open or closed position without rattling. Constructed of chrome plated sand cast brass. Installs with two FH fasteners (not included). Also see Sea-Dog® Stainless Folding Step (328020). WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Large Handle Kit - PairReplacement handle kit with both Left and Right-sided handles.Compatible With: Flush 3G hatch sizes 27, 30, 44, 60, 70, Bavaria big rectangle and Bavaria big square Coastline hatch, sizes 18, 22, 30, 40, 44, 50, 54, 60, 65 and 70 Ocean hatch, sizes 30, 40, 44, 50, 54, 60, 65, 66 (H.Rassy), 70, 75 and 77 Trimline hatch sizes 30, 40, 50, 60 and 70 Rolltop hatch, sizes 30, 40, 50, 60, 65 and 70 In the Box: One (1) Exterior Handle LH Grey Assembly One (1) Exterior Handle RH Grey Assembly Two (2) O-Ring Two (2) Exterior Handle - Grey Two (2) Base Bush - Grey Two (2) Base Bush O-ring Two (2) Handle packing washers One (1) Handle + Lock RH - Grey One (1) Handle + Lock LH - Grey Two (2) No. 10 Screw *Sold as an Individual

Read more less

Stainless Steel Table Base w/Locking PinStainless Steel Table Support with Locking Pull PinTube Size: 1-5/8'' Flange Dia.: 6-1/4"This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

Stainless Steel Mounting Bracket f/Side Mount Table PedestalPolished stainless steel, side mount table pedestal removes when not in use for clear decks. Locking feature offers added mounting strength.Features: Polished stainless steel pedestal & table support Anodized aluminum bracket Locking pull pin offers added mounting strength Removable 125° bent leg Dimensions: 4-7/8"W x 4"H x 1/2"D Screw: #10 flat head / 1/4" hole. Benefits: Eliminates the need for mounting holes in boat deck and/or cockpit Easy to remove when not in use, for clear passage and storage Quick set-up and removal in tight spaces Increased leg & foot room This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

T-Handle Latch Key ReplacementReplacement Key for Part Numbers: S-226B, S-226W, S-226BLS, 3226B

Read more less

Folding Step - Formed 304 Stainless SteelThe ultimate step at a very competitive price! This Folding Step can be locked in a rattle-free, upright position when not in use. The unique design features a sawtooth, edged step to provide secure footing when working on the mast or other areas where an additional step is needed but available space is limited. Usable tread is 1” W x 4-1/4" L. Overall length is 5-5/8”. Constructed of stamped 304 stainless with a tumbled and electro-polished finish. Installs with four #10 FH fasteners (not included). WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Stainless Steel Deck Step 3-1/4" x 8-3/8"Injection Molded Rubber/Stamped 304 Stainless SteelThese Deck Steps are lined with injection molded rubber to facilitate traction. Constructed of corrosion resistant stamped 304 stainless steel.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less