Heavy Duty Spare Tire Cover27410Strong black vinyl with corded edge and elastic closure for a snug fit. Protects tires or spares from sun and foul weather for years of use. Protects tires from sun and foul weather, Strong black vinyl material, Corded edge and elastic closure.Tire Size: 12"Diameter:21"Depth:6-1/2"WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

5' Roller BunkRoller bunks make loading and unloading small craft at very short or even dry ramps easy. Great for ramps where it is not practical to float the boat onto the trailer. Pre-assembled and pre-drilled for easy installation. May be installed using mounting brackets if lift and/or angle is needed, or may be bolted directly to trailer frame for a flat bottom boat, or even mounted on top of existing bunk boards.Features: Durable 2" polypropylene rollers on 1/2" shafts mounted in a heavy gauge pre-galvanized channel Supports up to 1500lbs of well distributed weight Mounting hardware not included Sold in pairs WARNING: This product can expose you to chemicals including ARSENIC ,CADMIUM which are known to the State of California to cause cancer or other reproductive harm, and BERYLLIUM,COBALT METAL POWDER,NICKEL (METALLIC) which are known to the State of California to cause cancer, and Chromium (hexavalent compounds),LEAD which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Vertical Bunk Bracket Lanced - 9-1/2"Adjustable bunk bracket. Used when mounting bunks on edge. Ideal for small craft trailers. A single bracket will allow the bunk board to pivot with the hull as the boat is loaded. Double brackets hold the board in place.Features: 9-1/2" Slot 7/16" x 6" 11 gauge materical, galvanized finish Lanced style

Read more less

Tail Light ProtectorAdded protection for fragile trailer tail lights. Mounts between the existing tail light mounting brackets and the lamp using the two lamp mounting studs. Mounting holes fit standard DOT brake/tail lamps. No hardware required for installation. Aluminum tread 0.080" thick

Read more less

Vertical Bunk Bracket Dimpled - 7-1/2"Adjustable bunk bracket. Used when mounting bunks on edge. Ideal for small craft trailers. A single bracket will allow the bunk board to pivot with the hull as the boat is loaded. Double brackets hold the board in place.Features: 7-1/2" Slot 7/16" x 4-3/8" 11 gauge materical, galvanized finish Dimpled style

Read more less

Swivel Bracket KitGalvanized swivel top brackets provide vertical and tilting adjustments for trailer bunks.Swivel Brackets for mounting Bunk Boards to Bolster Brackets.Features: Bunk flange holes 3/8" dia. Bunk flange 1-3/8" x 3-1/2" Swivel flange hole 1/2" dia. Swivel flange 2" tall x 3-1/2" 2-1/2" bunk flange hole centers & 1 hole centered 10 gauge material *Sold as kit with (2) brackets, (2) 7/16" x 1" head cap screws, and (2) 7/16" nylon lock nuts.

Read more less

Bolt-On Fender Step Pad - 3" Left Hand/Right HandThis fender step pad is ideal for the do-it-yourselfer. Step pad can be welded or bolted to your trailer fender. Step pad can also be bolted to your trailer frame with u-bolts. U-bolts NOT included.Features: Galvanized Finish 12 Gauge Steel 1-3/16"H x 3"W x 15-1/4"L Left Hand/Right hand

Read more less

ScuffBuster™ XL - 9" x 8.75" - Solid - 22G - Stainless SteelProtect Your Boat from Trailer Rollers - Enhance Your Boat's Appearance & Prevent Unsightly MarringThe Megaware ScuffBuster™ protects your boat from unsightly marring. Made from anti-corrosive, 22-gauge 304 stainless steel, Megaware ScuffBuster™ products attach to your boat’s surface with the highest quality materials and 3M® pressure-sensitive adhesives.WarrantyMegaware guarantees your Megaware ScuffBuster™ for a period of one year from the date of purchase. Please retain receipt for proof of purchase date.Features: Protect Your Boat's Gelcoat Minimize Roller and Trailer Scuffs Bend to Conform to Hull Mirror Polished Finish Specifications: Color: Stainless Box Dimensions: 1"H x 11"W x 11"L WT: 0.75 lbs UPC: 672057806371 Brochure (pdf)

Read more less

BunkWrap Kit - Black 16' x 2" x 4" Roll + 4 Caps + HRDW Roll + 4 Endcaps & Stainless Steel HardwareRenew your old, shaggy, carpeted bunks with the patented, permanent solution! Caliber BunkWrap eliminates your need to re-carpet every year due to use and wear. As a lifetime replacement for your old carpet, this innovative product is beneficial for both the environment and you!

Read more less

Bunk Mounting Bracket - GalvanizedThe heavy-duty galvanized hat-style bunk mount bracket attaches the bunk to upright bunk brackets on 3x3 cross members on trailers not exceeding 4,700 lbs capacity.Used primarily for the front bunk support, and on a few "Limited" models, used for rear support also. Measures 3" between uprights.

Read more less

Spring Hanger Bracket Kit Bolt-OnUse this spring bolt on hanger kit to mount your trailer springs.Includes: 2 bolt-on front spring hangers 2 bolt-on rear slipper spring hangers 2 shackle bolts and nuts

Read more less

Bunk Galvanized Mounting BracketC.E. Smith 11-gauge zinc-plated steel bunk mounting bracket bolts to bolster support brackets to attach bunks and set the proper angle. Bracket measures 3" wide.

Read more less

Grip Guard Traction GripFeatures: Guard Against Slips & Falls Silicon Carbide Grit System Anti-Slip Safety Tape Acrylic Waterproof Pressure Sensitive Adhesive Heavy-Duty Grade Easily Trimmable (2) 15" x 5" Grip Strips Brochure (pdf)

Read more less

ScuffBuster™ Standard - 5.75" x 4.5" - Solid Bowguard - 22G - Stainless SteelProtect Your Boat from Trailer Rollers - Enhance Your Boat's Appearance & Prevent Unsightly MarringThe Megaware ScuffBuster™ protects your boat from unsightly marring. Made from anti-corrosive, 22-gauge 304 stainless steel, Megaware ScuffBuster™ products attach to your boat’s surface with the highest quality materials and 3M® pressure-sensitive adhesives.WarrantyMegaware guarantees your Megaware ScuffBuster™ for a period of one year from the date of purchase. Please retain receipt for proof of purchase date.Features: Protect Your Boat's Gelcoat Minimize Roller and Trailer Scuffs Bend to Conform to Hull Mirror Polished Finish Specifications: Color: Stainless Box Dimensions: 1"H x 6"W x 8"L WT: 0.3 lbs UPC: 672057026373 Brochure (pdf)

Read more less

Hanger Torsion Mounting Hanger - 14" GalvanizedThe torsion axle mounting hanger attaches to 2" wide beams with u-bolts and holds torsion axles on single and tandem trailers with 14" tires and wheels. U-bolt mounting holes are 33-3/4" on center.

Read more less

Pontoon Bolster Bracket - 15-3/4" x 2"Pontoon bolster brackets support bunkboards in a shallow V cradle configuration that best suits pontoon hulls. Best when installed with 2x6, 2x8, or 2x10 carpeted bunk boards laid flat. A bracket should be installed at each frame cross member for maximum support and load capacity.

Read more less

Double U-Bolt Bolster Bracket - 8-3/4"Mounting bunk boards using double U-bolt bolster brackets provides the most rigid bolt-on bracket mounting possible. Made from heavy 7 ga galvanized steel, these brackets are 4” wide with slots that are 1/2” wide spaced 1-3/4” apart with a top hole diameter of 1/2”.

Read more less

Vertical 90° Bunk Bracket - 5" x 10" - Aluminum5” wide and 1/4” thick these heavy duty vertical bunk brackets are strong enough to mount large bunk boards to carry larger boats. Sold individually.

Read more less

Ribbed Roller Replacement Kit - 4-Pack - BlueReplace your worn ribbed rollers with this ribbed roller kit. Rollers fit 1 1/8" shaft or 3/4" shaft using included Delrin® bushings.Features: Blue TPR Zinc plated washers & clips Kit includes: Four 5" diameter x 3" wide ribbed rollers to fit 1-1/8" shaftWith polypropylene hubs Four Delrin® bushings to fit rollers to 3/4" shaft Four 1-1/8" washers Four 3/4" washers Four retainer rings

Read more less

Center Swivel Bracket - 2"Galvanized swivel top bracket provides vertical and tilting adjustment for trailer bunks. Swivel Bracket for mounting Bunk Boards to Bolster Brackets.Features: Bunk flange holes 3/8" dia. Bunk flange 1-3/8" x 3-1/2" Swivel flange hole 1/2" dia. Swivel flange 2" tall x 3-1/2" 2" bunk flange hole centers 11 gauge material Sold individually

Read more less

Heavy Duty Spare Tire Cover27440Strong black vinyl with corded edge and elastic closure for a snug fit. Protects tires or spares from sun and foul weather for years of use. Protects tires from sun and foul weather, Strong black vinyl material, Corded edge and elastic closure.Tire Size: 15"Diameter:29"Depth:9-1/2"WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Zinc U-Bolt 7/16"-14 X 3-1/8" X 4" with Washers & Nuts - SquareZinc-plated u-bolt for mounting brackets & accessories to trailer frames.Features: Square bend Grade 5 7/16"-14 diameter/thread 3-1/8" W x 4" L *Comes packaged with nuts and washers.

Read more less

Stake PocketThe easiest and most secure way to add removeable sides to a trailer. Sized to receive standard 2" x 4" studs.Features: Bolts onto trailer 11 gauge Hot dipped galvanized 3/8" holes for bolting to frame Center hole for an optional locking bolt Dimensions: 2-1/2" x 1-1/2" x 3-1/2"

Read more less

FlexStep® Pro Package - AluminumThe Adjustable & Removable Trailer Step - Make Boating Easier & More ConvenientMegaware FlexStep® Pro is an innovative multi-angle/extendable step system that attaches to your trailer frame, allowing easy access to virtually anywhere on your boat.Megaware EngineeringThe Megaware FlexStep® Pro makes boating more convenient than ever. This innovative multi-angle/extendable step system attaches to your trailer frame, allowing easy access to virtually anywhere on your boat. A quick, spring loaded pull handle and locking pin system adjusts the Megaware FlexStep® Pro to 16 positions for maximum reach.Megaware FlexStep® Pro is manufactured from lightweight, high tensile 6063-T6 anodized aluminum ensuring the highest quality. Each step safely holds up to 300 lbs.Using just four bolts, the Megaware FlexStep® Pro mounts to your trailer frame (2-3" deep by up to 4" wide*) in just minutes and easily disconnects with a single pin for safe storage during travel.*Larger trailer frames may be accommodated by purchasing longer bolts available at any hardware store.Features: 16 Adjustable Positions Extends from 17 to 21 Inches Removable for Safe Travel and Stowing Fits Most Trailer Rails Brochure (pdf)

Read more less

Bow Roller - Yellow PVC - 4" x 1/2" IDDurable thermo plasticized rubber (TPR) bow bell assemblies help to center the boat and prevent bow to bowstand contact. 2 sizes to fit bow stands with a 3” wide or 4” wide center roller bracket.

Read more less

Panel Bracket Assembly 12" Keel Roller - BlackProduct DescriptionPre-assembled for easy installation! Strong hot-dipped galvanized bracket with black rubber roller for proper keel support. Mounting slots are 10" on center

Read more less

ScuffBuster™ Standard with Notch - 5.75" x 4.5" - Notched Bowguard - 22G - Stainless SteelProtect Your Boat from Trailer Rollers - Enhance Your Boat's Appearance & Prevent Unsightly MarringThe Megaware ScuffBuster™ protects your boat from unsightly marring. Made from anti-corrosive, 22-gauge 304 stainless steel, Megaware ScuffBuster™ products attach to your boat’s surface with the highest quality materials and 3M® pressure-sensitive adhesives.WarrantyMegaware guarantees your Megaware ScuffBuster™ for a period of one year from the date of purchase. Please retain receipt for proof of purchase date.Features: Protect Your Boat's Gelcoat Minimize Roller and Trailer Scuffs Bend to Conform to Hull Mirror Polished Finish Specifications: Color: Stainless Box Dimensions: 1"H x 6"W x 8"L WT: 0.25 lbs UPC: 672057026380 Brochure (pdf)

Read more less

11" Wide x 12' Long Blue Carpet Roll11" wide covers a 2x4 or a 2x6 board Marine grade carpet Weather resistant 100% PET polyester High quality Durable backing Minimal water retention 16.oz per square yard weight Pile height 5/32"

Read more less

3" Bow Bell Roller Assembly - Black TPRDurable thermal plasticized rubber (TPR) bow bell assemblies help to center the boat and prevent bow to bowstand contact.Features: Black TPR 4-1/2" diameter 6" Wide 1/2" shaft Fits 3" wide center roller bracket

Read more less

Ribbed Roller 4 Pack - Gold Replace your ribbed wobble rollers with this thermal-plasticized rubber ribbed roller kit Rollers fit 1-1/8" shaft Kit includes four 5" x 3" ribbed rollers with polypropylene hub, four Delrin bushings for 3/4" shaft, for 1-1/8" washers, four 3/4" washers and four retainer rings

Read more less

Side Angle "L" Bracket - Pair - Galvanized7 ga, 1/2” shaft hole, 3/8” mounting hole. Sold in pairs.

Read more less

Bow Y-Stop - 2" x 2" - Black Natural RubberBlack natural rubber y stops are original equipment on many trailers. Features: Black natural rubber 4" span 2" x 2" mount 3/8" bolt

Read more less

Spare Tire Carrier with Lug NutsStrong 7/16" rod construction fits on frame, tongue, or rails up to 3" wide. The 3" of threads fit a wide variety of frame thicknesses and wheel sizes. Holds 4 or 5 lug wheels and fits 8" throught 14" wheels and most 15" wheels.Features: Length - 8-3/8" Zinc plated Comes with 2 lug nuts Sold individually WARNING: This product can expose you to chemicals including ARSENIC ,CADMIUM which are known to the State of California to cause cancer or other reproductive harm, and BERYLLIUM,COBALT METAL POWDER,NICKEL (METALLIC) which are known to the State of California to cause cancer, and Chromium (hexavalent compounds),LEAD which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

4" Bow Bell Roller Assembly - Blue TPRDurable thermal plasticized rubber (TPR) bow bell assemblies help to center the boat and prevent bow to bowstand contact.Features: Blue TPR 5-1/2" diameter 8" Wide 1/2" shaft Fits 4" wide center roller bracket

Read more less

Spare Tire Carrier - w/Brackets27201 Length: 8-3/8"Specially shaped 7/16" U-Bolt fits under trailer tongues up to 3" wide to secure a spare tire securely on top of the tongue. For all 4 and 5 lug spare wheels from 8" to 14" and most 15" wheels.WARNING: This product can expose you to chemicals including ARSENIC ,CADMIUM which are known to the State of California to cause cancer or other reproductive harm, and BERYLLIUM,COBALT METAL POWDER,NICKEL (METALLIC) which are known to the State of California to cause cancer, and Chromium (hexavalent compounds),LEAD which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Bow Y-Stop - 3" x 3" - Black Natural RubberBlack natural rubber y stops are original equipment on many trailers. Features: Black natural rubber 6-5/8" span 3" x 3" mount 1/2" bolt

Read more less

Panel Bracket Assembly 10" Keel Roller - BlackProduct DescriptionPre-assembled for easy installation! Strong hot-dipped galvanized bracket with black rubber roller for proper keel support. Mounting slots are 8" on center.

Read more less

Package Roller Shaft 1/2" x 12-3/4" with Cap Nuts - ZincRoller shafts blister packed each with two cap nuts.Features: Length: 12-3/4" Max Grip: 12.190"

Read more less

BunkWrap Kit - Grey 24' x 2" x 6" Roll + 4 Caps + HRDW Roll + 4 Endcaps & Stainless Steel HardwareRenew your old, shaggy, carpeted bunks with the patented, permanent solution! Caliber BunkWrap eliminates your need to re-carpet every year due to use and wear. As a lifetime replacement for your old carpet, this innovative product is beneficial for both the environment and you!

Read more less

BunkWrap End Cap 2x6" Black Accessory Kit with Stainless Steel Hardware *4-PackRenew your old, shaggy, carpeted bunks with the patented, permanent solution! Caliber BunkWrap eliminates your need to re-carpet every year due to use and wear. As a lifetime replacement for your old carpet, this innovative product is beneficial for both the environment and you!

Read more less

Marine Slides 1.5"x15" Black *10-PackMakes launching your boat or watercraft easy, slides effortlessly off bunks, and into the water.Features: The unique profile provides extra cushioning between the boat and trailer bunks. Washout channels flush sand and debris off the slides and away from the hull. Safer unloading and loading because of reduced friction and stress by 400% on the trailer cranking mechanisms, ropes, and hull bow hooks. Allows you to unload and load your boat or watercraft in shallower water. Fast and simple installation for both horizontal and vertical bunks. Made from a low-friction composite that is impervious to sun, weather, and saltwater. Excellent for use on work stations, lifts, boats, and watercraft dollies.

Read more less

BunkWrap Kit - Grey 16' x 2" x 4" Roll + 4 Caps + HRDW Roll + 4 Endcaps & Stainless Steel HardwareRenew your old, shaggy, carpeted bunks with the patented, permanent solution! Caliber BunkWrap eliminates your need to re-carpet every year due to use and wear. As a lifetime replacement for your old carpet, this innovative product is beneficial for both the environment and you!

Read more less

BunkWrap Kit - Black 16' x 2" x 4" Roll + 4 Caps + HRDW Roll + 4 Endcaps & Stainless Steel HardwareRenew your old, shaggy, carpeted bunks with the patented, permanent solution! Caliber BunkWrap eliminates your need to re-carpet every year due to use and wear. As a lifetime replacement for your old carpet, this innovative product is beneficial for both the environment and you!

Read more less

BunkWrap Kit - Black 16' x 2" x 6" Roll + 4 Caps + HRDW Roll + 4 Endcaps & Stainless Steel HardwareRenew your old, shaggy, carpeted bunks with the patented, permanent solution! Caliber BunkWrap eliminates your need to re-carpet every year due to use and wear. As a lifetime replacement for your old carpet, this innovative product is beneficial for both the environment and you!

Read more less

Marine Slides 3"x15" Black *10-PackMakes launching your boat or watercraft easy, slides effortlessly off bunks, and into the water.Features: The unique profile provides extra cushioning between the boat and trailer bunks. Washout channels flush sand and debris off the slides and away from the hull. Safer unloading and loading because of reduced friction and stress by 400% on the trailer cranking mechanisms, ropes, and hull bow hooks. Allows you to unload and load your boat or watercraft in shallower water. Fast and simple installation for both horizontal and vertical bunks. Made from a low-friction composite that is impervious to sun, weather, and saltwater. Excellent for use on work stations, lifts, boats, and watercraft dollies.

Read more less

BunkWrap End Cap 2x4" Grey Accessory Kit with Stainless Steel Hardware *4-Pack Renew your old, shaggy, carpeted bunks with the patented, permanent solution! Caliber BunkWrap eliminates your need to re-carpet every year due to use and wear. As a lifetime replacement for your old carpet, this innovative product is beneficial for both the environment and you!

Read more less

Marine Slides 3"x15" White *10-PackMakes launching your boat or watercraft easy, slides effortlessly off bunks, and into the water.Features: The unique profile provides extra cushioning between the boat and trailer bunks. Washout channels flush sand and debris off the slides and away from the hull. Safer unloading and loading because of reduced friction and stress by 400% on the trailer cranking mechanisms, ropes, and hull bow hooks. Allows you to unload and load your boat or watercraft in shallower water. Fast and simple installation for both horizontal and vertical bunks. Made from a low-friction composite that is impervious to sun, weather, and saltwater. Excellent for use on work stations, lifts, boats, and watercraft dollies.

Read more less

BunkWrap End Cap 2x6" Grey Accessory Kit with Stainless Steel Hardware *4-PackRenew your old, shaggy, carpeted bunks with the patented, permanent solution! Caliber BunkWrap eliminates your need to re-carpet every year due to use and wear. As a lifetime replacement for your old carpet, this innovative product is beneficial for both the environment and you!

Read more less