Portable Bilge PumpSelf-priming, centrifugal pump.  Ideal for jon boats, utility boats, dinghies, inflatable boats, and all other small watercraft.  Also great for removing fluids from non-marine applications.Features: Powered by 3 D-cell batteries (not included) A wide strainer base adds stability Suction cup or screw mount - Includes clip to attach a hose to the transom Submersible and runs dry without damage Technical Specifications: Flow Rate - 4.17 GPM (15.79 LPM) Dimensions - 5” x 5” x 12” Hose - 3/4" x 36" WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

2000 Bilge Pump - 12 VDC, 2000 GPHHeavy duty and built to last. SHURFLOs 2000 GPH nylon bilge pump offers a unique motor cooling system to ensure efficient performance and long life. Installation is a snap with our patented swivel base and 6' tinned wire assembly.Features: 3' Tinned Wire Assembly Anti-Airlock Tough Nylon Housing Ignition Protected Water Cooled Motors - Extended Life 3 Year Warranty CE Listed This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Volts: 12v Operation: Non-Automatic Gallons Per Hour: 2000 GPH Type: Electric Box Dimensions: 6"H x 7"W x 9"L WT: 5.5 lbs UPC: 752324010127

Read more less

Tsunami MK2 Manual Bilge Pump - T500 - 500 GPH & 12VThe Tsunami Mk2 is the only manual bilge pump that eliminates airlocks. This is done by the Patented X-Air™ Impeller, which ejects trapped air in the pump and pipework. Also, the Tsunami Mk2 is the most reliable manual bilge pump in freshwater applications, considering it has 40% better protection against water ingress and electrolysis vs. the Mk1 pump.Easy Installation & Service  GPH (Gallons Per Hour): 500 90° rotatable elbow outlet allows users to install the pump anywhere in a full 360° orientation Backward compatible hole pattern and motor cartridges of Tsunami Mk1 bilge and aerator pumps External mounting feet and integrated outlet reduces time and effort Service pump cartridges from hard-to-reach areas using only one hand Specifications: Rated Volts DC: 12V Fuse Size: 3 Amp Wire Length: (inch) 29" / (mm) 735 Hose Diameter: (inch) 3/4" and 1" *Must be used with appropriate Tsunami outlet Specifications: Gallons Per Hour: 500 GPH Operation: Non-Automatic Outlet Size: 3/4" or 1" Type: Electric Volts: 12v Box Dimensions: 4"H x 6"W x 7"L WT: 0.8 lbs UPC: 022697023971 Quick Guide (pdf)

Read more less

Inline Booster High Flow Electric Galley Pump - 12VThis high-performance whale pump fits inline to increase the flow rate.Features: The narrow design is ideal for dropping into the water tank  Compact, quiet, lightweight design for use with pressure switch and microswitch systems An inexpensive way to upgrade a manual water system  Also suitable for pumping diesel  Low power consumption  Specifications: Pump Type: Inline Weight: 015 kg (0.3 lbs.) Voltage: 12 VDC Recommended Fuse Size: 5 amps Cable Length: 1m (3 ft.) Hose Connection: Suitable for 10 mm (38 in.) or 13 mm (1/2 in.) flexible hose use WX1511B (stern adapter 11-15 mm) and connect WX1504 (15 mm (5/8 in.) equal straight Filter Included: No  Length: 129 mm (5-1/16 in.) Width: 36 mm (1-7/16 in.) Materials: Pump Body: ABS Seal: Nitrile Strainer: Polyurethane  Impeller: PBT Cable: PVC Performance: Discharge Head: Flow rate per minute/current draw @ 12VDC 0 m (0 ft.): 15.8 liters (4 US gallons) 3.8 amps 1 m (3 ft.): 14.8 liters (4 US gallons) 3.7 amps 3 m (10 ft.): 12.8 liters (3.5 US gallons) 3.5 amps  1 Year Warranty: CE certified ISO 88846 ISO 10133 ABYC H-23 IP67

Read more less

IL200 Plus In-Line Submersible Pump - 24V - 2.8GPMCentrifugal submersible and inline pump.Features:  Cable Length: 1(m) Connections: 1/2" (12.7mm) Hose Dimensions: 142mm long, 38mm diameter Maximum Current: 1.5(amps) Output: up to 12.7 litres/minute at up to .75bar (2.8 gallons/minute at 11psi) Suitable for diesel, fresh and salt water Quick diesel transfer with no spillage Bait tank aeration, diesel transfer, water transfer. Water Systems to 80 ºC Intermittent light duty Motor life approx 250 hours Actual Weight: 0.33 Kg  (Approx. 0.53 Kg packed) Specifications: Type: Electric Gallons Per Minute: 2.8 GPM Volts: 24v Box Dimensions: 3"H x 9"W x 13"L WT: 1 lbs UPC: 042237109873

Read more less

Replacement Strainer BaseReplacement Strainer Base f/Round Rule Pumps w/Flow Rate 1500-2000gphWARNING: This product can expose you to chemicals including FORMALDEHYDE (GAS) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov. Specifications: Type: Strainers Box Dimensions: 3"H x 6"W x 7"L WT: 0.15 lbs UPC: 042237085634

Read more less

Little Pal Utility PumpCompact polished brass multi-purpose hand pump Ideal for small engine and gearbox oil drain Simply pump old oil out with dipstick probe Oil and corrosion resistant brass and neoprene construction with up to 1 gpm output Small enough to fit any tool box WARNING: This product can expose you to chemicals including STYRENE which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov. Specifications: Gallons Per Minute: 1 GPM Outlet Size: 1/2" Type: Manual Box Dimensions: 2"H x 8"W x 11"L WT: 1 lbs UPC: 671880028622 Quick Guide (pdf)

Read more less

Kayak Hand Bilge Pump This Attwood Hand-Operated Bilge Pump quickly and safely removes unwanted water and other liquids from small craft such as kayaks, canoes, and small fishing boats. This pump can remove up to 8 gallons per minute, and no hose is required. The pump is an 18-inch-long pump and has an ergonomic hand grip that keeps the pump afloat if dropped into the water.Features: Ideal for small craft such as kayaks, canoes, and small fishing boats (inch) 18" long Sturdy, impact-resistant, and lightweight plastic construction *No hose is required Specifications: Gallons Per Minute: 8 GPM Operation: Non-Automatic Type: Manual Box Dimensions: 4"H x 4"W x 21"L WT: 3.7 lbs UPC: 022697115959

Read more less

HYDRA™ Livewell Pump - 600 GPH - 12V - Long NozzleThe T-H Marine HYDRA™ Livewell Pump is engineered for consistent livewell circulation with simplified service and dual-function capability for serious anglers. Backed by 4,000 hours of testing, HYDRA delivers dependable performance through an anti-airlock design that ensures reliable restarts—even when air is present in the line.Designed for durability in harsh marine environments, the pump features a precision-balanced motor and a 316 stainless steel motor shaft to reduce vibration, noise, and corrosion over time. Stator vane technology optimizes flow efficiency, while the dual-lock cartridge design allows fast motor removal and service without disconnecting hoses or plumbing.Built with versatility in mind, the HYDRA Livewell Pump includes a secondary outlet for wash-down applications, an integrated sealant channel to prevent leaks, and both short and long threaded intake options for flexible installations. Available in 600, 800, and 1100 GPH configurations and meeting ABYC, ISO, and U.S. Coast Guard standards, HYDRA is the premium solution for reliable livewell performance.Features: ANTI-AIRLOCK DESIGN: Engineered to restart reliably, even with air in the line. 316 STAINLESS STEEL MOTOR SHAFT: Corrosion-resistant for long-term durability. PRECISION BALANCED MOTOR: Runs smoother with reduced vibration and noise. REMOVABLE NOZZLE: Allows quick service without disconnecting the hose. STATOR VANE TECHNOLOGY: Optimizes flow efficiency and performance. DUAL-LOCK CARTRIDGE: Designed for quick removal and fast service. SECONDARY OUTLET: Dedicated outlet for wash-down pump. SEALANT CHANNEL: Integrated to prevent leaks. LONG: 3.5" (3/4"-14) Threaded intake tube (Hole installation size: 1-1/16") FLOW RATE: 600 GPH AMP DRAW: Approx. 3A FUSE SIZE: 4 AMP INSTALL HOLE: 1-1/16" Specifications: Gallons Per Hour: 600 GPH Gallons Per Minute: 10 Type: Pumps/Drives Volts: 12 Box Dimensions: 6"H x 6"W x 9"L WT: 1.1 lbs UPC: 733572258264

Read more less

Submersible Electric Galley Pump - 24VWhale electric galley pump range includes models with the very latest electronic technology. All pumps are manufactured from only highest quality inhouse molded parts and robust motors.We have developed our pump designs based on more than 60 years of expertise. Today we have used that experience to develop our most compact, quiet lightweight high performance electric impeller pumps.Features and Benefits Simple, compact and an economical solution Long life, very quiet with low power consumption An inexpensive way to update a manual to an electric system Suitable for use with pressure switch and microswitch systems WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Gallons Per Minute: 3.48 GPM Operation: Non-Automatic Outlet Size: 3/8" Volts: 24v Type: Electric Box Dimensions: 2"H x 6"W x 7"L WT: 0.5 lbs UPC: 766478942166

Read more less

Bilge Pump - 600 GPH - Non-AutomaticThe TRAC Outdoor 69300 Bilge Pump is a self priming, 12V centrifugal pump that's ideal for use in all watercraft.  With a cartridge style pump head and universal strainer base, this pump was designed for easy installation and retrofitting. The universal strainer base is connection-compatible with Attwood Tsunami, Rule, and Johnson/Mayfair cartridge pumps.  The screw mounting holes match Rule and Attwood Tsunami pumps. It is ignition protected, can run dry without damage and has a low power draw. *Float switch not included Features: Cartridge style pump head Strainer base also includes side mounting option for tight spaces Runs dry without damage Meets ABYC, NMMA, Coast Guard and ISO marine standards Technical Specifications: Operation - Non-automatic Flow Rate - 600 GPH Discharge Outlet - 3/4" Voltage - 12 V *Sold as an IndividualWARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Electric Volts: 12v Gallons Per Hour: 600 GPH Outlet Size: 3/4" Operation: Non-Automatic Box Dimensions: 4"H x 7"W x 8"L WT: 0.6 lbs UPC: 666996100034 Owner's Manual (pdf)

Read more less

Cartridge Bilge Pumps 1000 GPHThe 1000 GPH incorporates some of the most advanced features in the industry, features developed from service in a wide variety of uses including racing, cruising, sport fishing, and demanding commercial duties. We have improved the design with easy-to-install Dura-Port discharge ports to eliminate stress cracking caused by over-tightened hose clamps. The pumps are delivered including both a straight and a 90 degree smooth elbow Dura-Port as well as a removable check valve.Both the Cartridge and the Ultima Combo pumps may be manually operated via the Johnson Pump bilge control panel.CE-approvedFeatures: Compact, all-in-one motor/impeller unit No tools needed for maintenance Extremely energy efficient Water-cooled motor for long service intervals Meets the international standard, ISO 8849 marine Capacity 3 ft (0.9 m) head (13.6 V): 50 l/min - 800 GPH Capacity Straight: 63 l/min - 1000 GPH Amperage: 3.2 A Fuse Size: 5 A Connection: 3/4" Max Height: 112 mm - 4.4" Weight: 0.27 kg - 9.6 oz. Specifications: Gallons Per Hour: 1000 GPH Operation: Non-Automatic Outlet Size: 3/4" Volts: 12v Type: Electric Box Dimensions: 4"H x 5"W x 5"L WT: 0.96 lbs UPC: 729321329033 Owner's Manual (pdf)

Read more less

1000 GPH Ultima Combo Automatic Submersible Bilge Pump 12VJohnson Pump Marine Ultima Combo bilge pumps are JPM's proven Cartridge Bilge Pumps combined with the non-clogging electronic switch Ultima Switch™ for automatic operation. The electronic automatic switch Ultima Switch™ uses the patented Mirus field effect detector cells producing micro-electrical fields that detect disruptions caused by level of water present in the bilge and automatically activates and deactivates the pump.CE-ApprovedFeatures: Pre-configured with an electronic Ultima Switch for automatic operation Capacities 500 GPH, 750 GPH, 1000 GPH and 1250 GPH Extremely energy efficient Water-cooled motor for long service intervals Compact, all-in-one motor/impeller unit with stainless steel (SS2343) shaft No tools needed for maintenance, no need for complete disassembly. You can now leave the pump casing attached to both the boat and the hoses.  500 GPH, 750 GPH, and 1000 GPH pumps have easy-to-install Dura-Port discharge ports to eliminate stress cracking caused by over-tightened hose clamps 500 GPH, 750 GPH, and 1000 GPH pumps are delivered including both a straight and a 90° smooth elbow Dura-Port as well as a removable check valve Meets the international standard, ISO 8849 marine Pump body: Thermoplastic Shaft seal: Lip seal Shaft: Stainless steel Voltage: 12v Wire size: 16GA Hose size: 3/4" Includes Dura-port connection Specifications Capacity 3ft (0.9 m) head (13.6V/27.2): 50 l/min - 800 GPH Capacity straight (13.6V/27.2V): 63 l/min - 1000 GPH Amperage: 3.2 A Fuse size: 5 A Connection: 3/4" Length: 4.41" (112 mm) Width: 4.25" (108 mm) Height: 3.35" (85 mm) Weight: 14.4 oz. Specifications: Gallons Per Hour: 1000 GPH Operation: Automatic Outlet Size: 3/4" Volts: 12v Type: Electric Box Dimensions: 4"H x 5"W x 6"L WT: 1.15 lbs UPC: 729321079037 Owner's Manual (pdf)

Read more less

Thirsty-Mate Hand PumpThe Beckson THIRSTY-MATE hand pump is manufactured in the U.S.A. of the finest materials available. It is self-priming and very easy to clean. This hand pump will not rust or corrode or mar your boat. If your THIRSTY-MATE hand pump becomes clogged, simply remove the foot valve assembly and clean out the inside. Spare parts such as replacement foot valve assemblies and hoses are readily available.Features: Angled top sleeve Contoured red tee handle Non-conductive material Self-priming plunger valve Special polyvinyl grey body and shaft Removable foot valve for cleaning Self-priming Solvent welded construction Will withstand temperature to 120 degrees F (49 degrees C) Length: 24" Diameter: 1-3/4" Strokes/Gal: 6 Capacity: 10GM Hose Length: 24" WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Gallons Per Hour: 600 GPH Gallons Per Minute: 10 GPM Type: Manual Box Dimensions: 2"H x 6"W x 26"L WT: 1.1 lbs UPC: 021083000077

Read more less

Tsunami MK2 T500 Manual Bilge Pump with Installation Kit - 500 GPH & 12VThis is a complete kit (includes a bilge pump) to install a manual bilge pump with a 3/4" I.D. hose outlet. The Tsunami Mk2 is the only manual bilge pump that eliminates airlocks. This is done by the Patented X-Air™ Impeller, which ejects trapped air in the pump and pipework. Also, the Tsunami Mk2 is the most reliable manual bilge pump in freshwater applications, considering it has 40% better protection against water ingress and electrolysis vs. the Mk1 pump. Kit Includes: Attwood Tsunami Mk2 500 GPH Pump Washer / Non-Return Valve 90-degree Outlet Straight Outlet 3/4" x 5' Pump Hose 3/4" Thru-hull fitting 2-way on/off switch with bezel plate Snap-It hose clamps Wire Kit Installation Kit Easy Installation & Service: GPH (Gallons Per Hour): 500 GPH 90° rotatable elbow outlet allows users to install the pump anywhere in a full 360° orientation Backward compatible hole pattern and motor cartridges of Tsunami Mk1 bilge and aerator pumps External mounting feet and integrated outlets reduce time and effort Service pump cartridges from hard-to-reach areas using only one hand Specifications: Rated Volts DC: 12VDC Fuse Size: 3 AMP Wire Length: (inch) 29" / (mm) 735mm Hose Diameter: (inch) 3/4" and 1" *Caution: Bilge pump switches are not external ignition protected Specifications: Gallons Per Hour: 500 GPH Operation: Non-Automatic Outlet Size: 3/4" or 1" Type: Electric Volts: 12v Box Dimensions: 6"H x 7"W x 9"L WT: 1.75 lbs UPC: 022697024213 Quick Guide (pdf)

Read more less

Proline Bilge Pump1000 GPH w/DuraPortsCapacity 3' (0.9M) head (13.6V):60 L/M - 952 GPH Capacity Straight (13.6V): 73 L/M - 1150 GPHAmperage:3AFuze Size:5AConnection:3/4"Dimensions: 5"L x 3"W x 4"H Specifications: Gallons Per Hour: 1000 GPH Operation: Automatic Volts: 12v Type: Electric Box Dimensions: 4"H x 5"W x 5"L WT: 0.94 lbs UPC: 729321221023

Read more less

Tsunami MK2 Manual Bilge Pump - T800 - 800 GPH & 12VThe Tsunami Mk2 is the only manual bilge pump that eliminates airlocks. This is done by the Patented X-Air™ Impeller, which ejects trapped air in the pump and pipework. Also, the Tsunami Mk2 is the most reliable manual bilge pump in freshwater applications, considering it has 40% better protection against water ingress and electrolysis vs. the Mk1 pump.Easy Installation & Service  GPH (Gallons Per Hour): 800 90° rotatable elbow outlet allows users to install the pump anywhere in a full 360° orientation Backward compatible hole pattern and motor cartridges of Tsunami Mk1 bilge and aerator pumps External mounting feet and integrated outlet reduces time and effort Service pump cartridges from hard-to-reach areas using only one hand Specifications: Rated Volts DC: 12V Fuse Size: 4 Amp Wire Length: (inch) 29" / (mm) 735 Hose Diameter: (inch) 3/4" and 1" *Must be used with appropriate Tsunami outlet Specifications: Gallons Per Hour: 800 GPH Operation: Non-Automatic Outlet Size: 3/4" or 1" Type: Electric Volts: 12v Box Dimensions: 4"H x 5"W x 7"L WT: 1.2 lbs UPC: 022697023988 Quick Guide (pdf)

Read more less

Spare Motor for Cartridge - 12voltUpgrade the output of your bilge pump in a matter of a few minutes by replacing the cartridge. Cleaning debris from the impeller has never been simpler or easier. Specifications: Type: Replacement Motors Box Dimensions: 3"H x 6"W x 8"L WT: 0.6 lbs UPC: 729321285520

Read more less

360GPH Standard Bilge Pump - 12VCustomers talk about flow, they want the water out of the bilge, andfast. Improved design and performance means that our next generation 360GPH pump will produce this flow at just 12V rather than 13.6V as previously required...more typical of on board voltage supply.Our next generation of Rule pumps include check valves and to do this, we've created hidden air vent to prevent airlocking. Under each strainer tab there is a small hole that vents any air trapped in the pump housing preventing airlocks...and that's how we do it.We have true electromagnetic suppression (EMC). We have a built-in thermal cell that protects the pump and the vessel when things get too hot.We've re-engineered the inside and outside of our bilge pumps, starting with a blank slate. And we're just getting startedFeatures: Non-automatic - used with a panel switch or Rule float switch Submersible and Ignition Protected High efficiency, low amp motor Stainless-steel shaft Includes backflow preventer WARNING: This product can expose you to chemicals including 1,3-Butadiene which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Electric Gallons Per Hour: 360 GPH Operation: Non-Automatic Outlet Size: 3/4" Volts: 12v Box Dimensions: 4"H x 7"W x 7"L WT: 0.8 lbs UPC: 042237104700 Brochure (pdf)

Read more less

Rule-A-Matic® Float SwitchYear after year, the Rule-A-Matic has been the switch of choice for boaters the world over. Our latest design now includes a removable base for easy cleaning and servicing, a mercury free snap switch tested to over one million cycles and marine grade blocked wire. Designed for pumps drawing up to 14 Amps. Now includes a 2 year warranty.WARNING: This product can expose you to chemicals including STYRENE which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov. Specifications: Volts: 12/24/36v Type: Switches Box Dimensions: 2"H x 5"W x 8"L WT: 0.4 lbs UPC: 042237095435 Owner's Manual (pdf)

Read more less

LoPro 900GPH Bilge Pump - AutomaticThe Rule LoPro™ 900 Automatic is a fully automatic low profile Bilge Pump with a 900 gallons per hour capacity. Designed for tight spaces, the height of the pump is only 2-1/4".It features a threaded discharge nozzle to which you can attach either a straight or a 90° fitting (included). In addition, you may use the tricuspid check valve (included) on the straight fitting to minimize the back flow of water. The entire discharge body swivels up to 180° for ease of installation. The hose attached can also swivel 360° to route the hose perfectly. The pump features a sensing switch to control the pump. Unique to this pump are two settings, a high setting where the pump turns on when the water reaches 1-3/4" and a low setting where the pump turns on when the water reaches 1".Features: 900 GPH Low Profile Bilge Pump Fits into hard to reach places Fully Autuomatic- two settings available, high and low Threaded discharge ports with mulitiple fittings available Features a tricuspid check valve to minimize back flow of water 3 Year WarrantyWARNING: This product can expose you to chemicals including STYRENE which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov. Specifications: Volts: 12v Operation: Automatic Gallons Per Minute: 15 GPM Gallons Per Hour: 900 GPH Type: Electric Box Dimensions: 4"H x 8"W x 12"L WT: 1.7 lbs UPC: 042237114372 Brochure (pdf)

Read more less

Heavy Duty Bilge Pump 4000 GPH - 24VFeatures: Limited 1 Year Warranty  Capacities of 1600, 2200, or 4000 GPH Liquid-cooled, 12-pole motor with double ball bearings for extended service life The shaft of stainless steel (SS2343) The impeller is carefully designed and tested to maximize head and flow 4000 GPH features a robust motor design, mechanical shaft seal, high impact ABS plastic, and unique threaded port design Universal base plate and choice of two different ports makes for a simple installation Removable check valve included Heavy Duty Submersible Pumps can be combined with either an electronic float switch or the Ultima Switch for automatic operation Specifications: Capacity 1.0M head (13.6V/27.2V): 164 l/min - 2600 GPH Capacity straight (13.6V/27.2V): 252: l/min -4000 GPH 24V 7.5A Fuse Size: 15A Connection 1.5" and 2"

Read more less

18" Hand Pump with HoseManual 8 Stroke Piston Utility Pump with 18" Hose by Johnson Pump. Light tough durable easy handling, extra fast pumping hand pumps are ideal stow aboard. Comfortable handle grip and extra-large capacity make manual pumping somewhat less of a chore. Ideal for emergency pumping and where electrical current is not available.

Read more less

Fish Box Evacuation PumpThe fish box evacuation pump is perfect for emptying a fishbox after a day's fishing. Typically the fish box is not only used for storing the days catch but very often is used for a cooler for supplies. This means that there can be all manner of debris left in the bottom of the fish box at the end of the day. This self-priming pump is designed for passing typical debris, such as bait residue, particles of ice, fish scales, etc. Its dry-running capabilities and the 360° rotatable head allow this pump to be mounted in almost any position in the boat, allowing for total flexibility.Features: Flexible installation No filter required Compact and simple design 12V Dry running capapbility Connections for 38mm (1-1/2") Ports Up to 19 Liters per Minute (5 US Gallons) flow Relevant standards: ISO 8846 MARINE and USCG Regulations for Ignition Protection Meets BSEN 50081 (Electro Magnetic Compatibility) WARNING: This product can expose you to chemicals including FORMALDEHYDE (GAS) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov. Specifications: Outlet Size: 1-1/2" Gallons Per Minute: 5 GPM Volts: 12v Type: Electric Box Dimensions: 6"H x 7"W x 14"L WT: 6.8 lbs UPC: 671880575911 Brochure (pdf)

Read more less

Cartridge ComboCombines the line of cartdrige bilge pumps with automatic operation. Equipped with a non-clogging electronic float switch.Specs: Capacity 3' head (13.6V): 50l/min - 800 GPH Capacity Straight (13.6V): 63l/min - 1000GPH Amperage: 3.2A Fuse Size: 5A Connection: 3/4" Specifications: Gallons Per Hour: 1000 GPH Operation: Automatic Outlet Size: 3/4" Volts: 12v Type: Electric Box Dimensions: 5"H x 7"W x 7"L WT: 1.15 lbs UPC: 7330717013059

Read more less

Automatic Submersible Bilge Pump - Ultima Switch02274-001 Heavy-Duty, high-performance pump Exceeds the tough demands of commercial and recreational duty Liquid Cooled 16-Pole motor with double ball bearings Lip Seal design construction Prewired with automatic float switch(with Manual Over-ride Operation) Optional and removable check valve included 1-1/8" & 1-1/4" hose adapters included 3 year warranty Specifications: Gallons Per Hour: 220 GPH Operation: Automatic Volts: 12v Type: Electric Box Dimensions: 8"H x 8"W x 9"L WT: 5.89 lbs UPC: 729321916486 Owner's Manual (pdf)

Read more less

1250 GPH Ultima Combo Automatic Submersible Bilge Pump 12VJohnson Pump Marine Ultima Combo bilge pumps are JPM's proven Cartridge Bilge Pumps combined with the non-clogging electronic switch Ultima Switch™ for automatic operation. The electronic automatic switch Ultima Switch™ uses the patented Mirus field effect detector cells producing micro-electrical fields that detect disruptions caused by level of water present in the bilge and automatically activates and deactivates the pump.CE-ApprovedFeatures: Pre-configured with an electronic Ultima Switch for automatic operation Capacities 500 GPH, 750 GPH, 1000 GPH and 1250 GPH Extremely energy efficient Water-cooled motor for long service intervals Compact, all-in-one motor/impeller unit with stainless steel (SS2343) shaft No tools needed for maintenance, no need for complete disassembly. You can now leave the pump casing attached to both the boat and the hoses.  500 GPH, 750 GPH, and 1000 GPH pumps have easy-to-install Dura-Port discharge ports to eliminate stress cracking caused by over-tightened hose clamps 500 GPH, 750 GPH, and 1000 GPH pumps are delivered including both a straight and a 90° smooth elbow Dura-Port as well as a removable check valve Meets the international standard, ISO 8849 marine Pump body: Thermoplastic Shaft seal: Lip seal Shaft: Stainless steel Voltage: 12v Wire size: 16GA Hose size: 1-1/8" Does not include Dura-port connection Specifications Capacity 3ft (0.9 m) head (13.6V/27.2): 60 l/min - 952 GPH Capacity straight (13.6V/27.2V): 73 l/min - 1150 GPH Amperage: 3 A Fuse size: 5 A Connection: 1-1/8"" Length: 4.41" (112 mm) Width: 4.25" (108 mm) Height: 3.35" (85 mm) Weight: 16 oz. Specifications: Gallons Per Hour: 1250 GPH Operation: Automatic Outlet Size: 1-1/8" Volts: 12v Type: Electric Box Dimensions: 4"H x 5"W x 6"L WT: 1.09 lbs UPC: 729321082037 Owner's Manual (pdf)

Read more less

Hand Bilge Pump 36" x 72"These Manual Bilge Pumps are designed for use in small boats without electrical power or larger boats in emergencies where power is no longer available. Compact, lightweight, and easy to stow. A foot valve is removable for easy cleaning. Capacities from 6-13 GPM. Pumps feature removable hoses and storage clips. The hose must be screwed in to prevent leaks, NOT pushed in, and constructed of durable UV-resistant injection molded nylon.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Manual Box Dimensions: 8"H x 8"W x 43"L WT: 2.8 lbs UPC: 035514503068

Read more less

High Water Bilge Alarm with Switch & Gauge - 24VUsing a compact float switch and dash mounted alarm, Rule provides boaters with a warning to high bilge water levels. Ideal for larger yachts and commercial vessels larger than 26' with unmanned compartments that have to comply with CFR 182.530. A bright LED indicator light provides a visual alarm when ambient noise levels exceed alarm volume. Constantly monitor your bilge for water and stay compliant to Coast Guard regulations with a Hi-Water Bilge Alarm from Rule.Features: Visible and audible alarm to monitor bilge water levels Includes mercury-free float switch and dash mounted alarm Complies with CFR 182.530 24V WARNING: This product can expose you to chemicals including STYRENE which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

Read more less

Rule-Mate® 800 Fully Automated Bilge Pump - 24VFeatures: State-of-the-art water sensing technology Pump turns on when water level rises and shuts off when water is removed No float switch required 800 GPH/3028 LPH Anti-fouling impeller Submersible Ignition protected Includes back flow preventer 3-year warranty Specifications: Type: Electric Gallons Per Hour: 800 GPH Operation: Automatic Volts: 24v Box Dimensions: 4"H x 7"W x 9"L WT: 1.25 lbs UPC: 042237106254

Read more less

Rule-Mate® 1100 Fully Automated Bilge Pump - 12VFeatures: State-of-the-art water sensing technology Pump turns on when water level rises and shuts off when water is removed No float switch required 1100 GPH/4164 LPH Anti-fouling impeller Submersible Ignition protected Includes back flow preventer 3-year warranty Specifications: Type: Electric Gallons Per Hour: 1100 GPH Operation: Automatic Volts: 12v Box Dimensions: 4"H x 7"W x 9"L WT: 1.3 lbs UPC: 042237106216

Read more less

Shower Drain and Bilge PumpRobust Single Diaphragm Design Sink & Shower Drain PumpFlow rate: Nominal 16 Litres/min (4.2 US gallons/min)Self-priming from dry up to 3m (10ft)Features: Flexible installation No filter required Compact and simple design Dry running capability Relevant Standards: ISO 8846 MARINE and USCG Regulations for Ignition Protection ISO 8849 MARINE Bilge Pump Standard Built to ISO 15083 Specification Meets BSEN 50081 (Electro Magnetic Compatibility) WARNING: This product can expose you to chemicals including FORMALDEHYDE (GAS) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov. Specifications: Gallons Per Minute: 4.2 GPM Inlet Size: 3/4" Outlet Size: 3/4" Suction Lift (ft.): 10' Volts: 12v Type: Shower Drains Box Dimensions: 6"H x 8"W x 14"L WT: 6.65 lbs UPC: 671880581561 Owner's Manual (pdf)

Read more less

500GPH Electronic Sensing Bilge Pump - 12VIn the next generation sensing bilge pumps, the 500GPH S series pump works on the principle of impeller resistance. The pump will turn on every 2-1/2 minutes for about one second to sense for water. If water is present, the pump will sense resistance and continue to run until all water is removed. After that, it will resume checking for water every 2-1/2 minutes. Water is kept in check between 1/8" and 3/8"!!! Great idea when power conservation is needed and as an added benefit, no float switch is needed!All that plus the added benefits of our standard bilge pump: Check valve included with hidden air vent to prevent airlocking True electromagnetic suppression (EMC) A built-in thermal cell that protects the pump and the vessel when things get too hot These are the smallest automatic pumps available on the market!!!Features: Completely automatic with manual override - No Float Switch Needed! Submersible and Ignition Protected High efficiency, low amp motor Stainless-steel shaft Includes backflow preventer WARNING: This product can expose you to chemicals including 1,3-Butadiene which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Electric Gallons Per Hour: 500 GPH Operation: Automatic Volts: 12v Box Dimensions: 4"H x 7"W x 7"L WT: 0.8 lbs UPC: 042237104786

Read more less

Rule-A-Matic® Plus™ Float SwitchSleek and rugged, the Rule-A-Matic Plus float switch has a strong, fully integrated, impact resistant cover, which protects against debris and jamming. 14 gauge highly abrasive resistant marine grade wire, and a built-in test feature. Designed for pumps drawing upt to 20 Amps Model 40A and 40FA now includes a 2 year warranty.WARNING: This product can expose you to chemicals including STYRENE which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov. Specifications: Volts: 12v Type: Switches Box Dimensions: 3"H x 6"W x 8"L WT: 0.6 lbs UPC: 042237095633 Owner's Manual (pdf)

Read more less

Rule 2000Engineered to commercial standards. The Rule 2000 is the best selling high capacity submersible bilge pump in the world. 1-1/8" (28.6mm) discharge outlet. 12 Volts DC unless noted.Features: Fully Submersible Easy clean snap lock strainer Silent and vibrationless operation Anti-airlock protection Compact, efficient long life motor Ignition protected No burn-out when run dry Rust and Corrosion protection Used by leading boatbuilders worldwide marine grade blocked wiring WARNING: This product can expose you to chemicals including FORMALDEHYDE (GAS) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov. Specifications: Gallons Per Hour: 2000 GPH Operation: Non-Automatic Outlet Size: 1-1/8" Volts: 12v Type: Electric Box Dimensions: 4"H x 5"W x 6"L WT: 3.1 lbs UPC: 042237083326 Owner's Manual (pdf)

Read more less

Aqua Void Automatic 500 GPH Bilge Pump - 12VWith its industry-first quick-change motor connection and new reinforced click-in basket, this bilge pump simplifies cleaning and installation, and it's convenient and efficient. Its enhanced motor ensures reliability and performance in any condition. Experience worry-free boating with Aqua Void.Experience the Industry-First Quick-Change Motor ConnectionJohnson Pump's groundbreaking product features a quick-change motor connection for hassle-free cartridge motor changes or capacity upgrades.Take Control of the Boating Experience with Unparalleled ConvenienceThe Aqua Void Cartridge Bilge Pump is designed with single-handed access, perfect for tight bilge spaces. The pump body is easy to install or remove, and an innovative reinforced click-in basket simplifies installation, cleaning, or inspection.Enjoy Enhanced Efficiency and Higher Flow RatePowered by an enhanced motor and high-flow impeller, the Aqua Void achieves increased efficiency and a higher flow rate while conserving energy consumption.Trust in Reliable Performance Under Demanding ConditionsJohnson Pump Marine is renowned for its industry-leading reliability. The Aqua Void lives up to this reputation with its robust construction and meticulous engineering.Enjoy a worry-free time on the water and experience Reliability On Board. The Aqua Void Bilge Pump is a game-changing solution that sets a new standard in bilge pumps. Don't miss this opportunity to enhance the boating experience. Get the Aqua Void today!Features: High-flow impeller design Quick-change motor connection Switchless automatic bilge pump with low-amp resistance monitoring Durable thermoplastic housing design commonality with removable motor cartridge Smaller profile than pumps with switches Straight or 90-degree dura port discharge ports with an included check valve Water-cooled motor, 316 stainless steel shaft, and permanently lubricated double bearings Clip-in basket Benefits: Heightened efficiency and an increased flow rate Enjoy quick and hassle-free cartridge motor changes or capacity upgrades Automatically monitors the presence of water through low-amp draw impeller spin The common body allows interchangeable motor cartridge replacement to the same or different size For tighter fit in smaller spaces Allow multi-directional hose routing, eliminate stress cracking without disengaging hoses or removing pumps, and reduce cycling from water backflow Corrosion-resistant and extended life Competitive Advantages: The most efficient and highest flow in the GPH capacity category Industry-first and only cartridge motor pump with an included harness connection requiring no cutting and splicing of wires 100 days of service before critical battery draw down* Automatically monitors the presence of water through low-amp draw impeller spin Ease of installation & maintenance Specifications: Pump Size: 500 GPH Capacity Straight (12V): 600 GPH (38 I/min) Voltage: 12V Amp: 2.7A Fuse: 3.5A Hose Connection: 3/4 in. Wire Size: 16 GA, TINNED Weight: 11.2 oz (0.32 kg) Body: ABS Dura Port: PA66/GF - Nylon Shaft: 316 Stainless Steel Shaft Seal: Nitrile Rubber Motor Cartridge: PC-ABS Pump Dimensions (W x H x L): 2.75 x 4.69 x 5.24 inches (70 x 119 x 133 mm) Specifications: Gallons Per Hour: 500 GPH Operation: Automatic Outlet Size: 3/4" Type: Electric Volts: 12v Box Dimensions: 4"H x 5"W x 6"L WT: 1.2 lbs UPC: 7330717018184 Quick Guide (pdf)

Read more less

Siphon-Mate Siphon PumpSpecialty Transfer PumpSafety experts caution against the unsafe practice of siphoning petroleum by mouth, warning specially, that it can result in loss of life. Beckson's answer is the patented Siphon-Mate pump; a combination displacement lift pump and siphon pump with valves suitable for transferring fuel. Pump half strokes to start flow. Once flow begins, fully extending the handle will allow siphoning provided that the source is higher in elevation than the receptacle. Supplied with clear tubing to allow versatile application. Cut tubing for desired length of intake and discharge hose. When finished siphoning or pumping flammable liquids, be sure to drain siphon pump of liquid before storing. This pump not intended for transfer of liquid over 120 degrees F (49 degrees C) nor solvents that will attack PVC.Features Use for diesel, oil, water Length: 11-1/2" (28.4cm) Diameter: 1-1/4" (32mm) Lifts: 4 oz (.12 L) per stroke WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Manual Box Dimensions: 2"H x 9"W x 14"L WT: 1 lbs UPC: 021083000299

Read more less

Thirsty-Mate Hand Pump with 20" HoseThe Beckson THIRSTY-MATE hand pump is manufactured in the U.S.A. of the finest materials available. It is self-priming and very easy to clean. This hand pump will not rust or corrode or mar your boat. If your THIRSTY-MATE hand pump becomes clogged, simply remove the foot valve assembly and clean out the inside. Spare parts such as replacement foot valve assemblies and hoses are readily available.Features: Angled top sleeve Contoured red tee handle Non-conductive material Self-priming plunger valve Special polyvinyl grey body and shaft Removable foot valve for cleaning Self-priming Solvent welded construction Will withstand temperature to 120 degrees F (49 degrees C) Length: 18" Diameter: 1-1/4" Strokes/Gal: 10 Capacity: 6GM Hose Length: 20" WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Gallons Per Hour: 360 GPH Gallons Per Minute: 6 GPM Type: Manual Box Dimensions: 2"H x 3"W x 20"L WT: 0.4 lbs UPC: 021083000046

Read more less

500 GPH Ultima Combo Automatic Submersible Bilge Pump 12VJohnson Pump Marine Ultima Combo bilge pumps are JPM's proven Cartridge Bilge Pumps combined with the non-clogging electronic switch Ultima Switch™ for automatic operation. The electronic automatic switch Ultima Switch™ uses the patented Mirus field effect detector cells producing micro-electrical fields that detect disruptions caused by level of water present in the bilge and automatically activates and deactivates the pump.CE-ApprovedFeatures: Pre-configured with an electronic Ultima Switch for automatic operation Extremely energy efficient Water-cooled motor for long service intervals Compact, all-in-one motor/impeller unit with stainless steel (SS2343) shaft No tools needed for maintenance, no need for complete disassembly. You can now leave the pump casing attached to both the boat and the hoses.  500 GPH pump has easy-to-install Dura-Port discharge ports to eliminate stress cracking caused by over-tightened hose clamps Icludes both a straight and a 90° smooth elbow Dura-Port as well as a removable check valve Meets the international standard, ISO 8849 marine Pump body: Thermoplastic Shaft seal: Lip seal Shaft: Stainless steel Voltage: 12v Wire size: 16GA Hose size: 3/4" Includes Dura-port connection Specifications Capacity 3ft (0.9 m) head (13.6V/27.2): 33 l/min - 525 GPH Capacity straight (13.6V/27.2V): 40 l/min - 630 GPH Amperage: 2.5 A Fuse size: 5 A Connection: 3/4" Length: 4.41" (112 mm) Width: 4.25" (108 mm) Height: 3.35" (85 mm) Weight: 14.4 oz. Specifications: Gallons Per Hour: 500 GPH Operation: Automatic Outlet Size: 3/4" Volts: 12v Type: Electric Box Dimensions: 4"H x 7"W x 7"L WT: 1 lbs UPC: 729321075039 Owner's Manual (pdf)

Read more less

Automatic Submersible Bilge Pump - Electromagnetic Switch02204-00 Heavy-Duty, high-performance pump Exceeds the tough demands of commercial and recreational duty Liquid Cooled 16-Pole motor with double ball bearings Lip Seal design construction Prewired with automatic float switch(with Manual Over-ride Operation) Optional and removable check valve included 1-1/8" & 1-1/4" hose adapters included 3 year warranty Specifications: Gallons Per Hour: 2200 GPH Operation: Automatic Volts: 12v Type: Electric Box Dimensions: 8"H x 8"W x 9"L WT: 6.05 lbs UPC: 729321916424

Read more less

HYDRA™ Cartridge Bilge Pump - 800 GPH - 12VThe HYDRA™ Cartridge Bilge Pump is engineered for dependable marine water removal with a service-friendly cartridge design that allows rapid motor replacement without removing the pump housing. Backed by 4,000 hours of testing, HYDRA delivers consistent performance through an advanced anti-airlock design that ensures reliable restarts—even when air is present in the line.Built for long-term durability in harsh marine environments, the HYDRA Cartridge Bilge Pump features a precision-balanced motor and a 316 stainless steel motor shaft to reduce vibration, noise, and corrosion. Stator vane technology optimizes flow efficiency, while the dual-lock cartridge system allows quick, tool-free motor removal for fast servicing on the water or at the dock.Designed with OEM-friendly installation in mind, the positive-lock strainer base matches most standard mounting patterns, and the pump includes straight and 90° outlets, a backflow restrictor, and a flat seal for flexible plumbing configurations. Available in 600 GPH, 800 GPH, and 1100 GPH options and meeting ABYC, ISO, and U.S. Coast Guard standards, the HYDRA Cartridge Bilge Pump delivers reliable performance boaters can trust.Features: AMP DRAW: Approx. 4A FUSE SIZE: 5 AMPFLOW RATE: 800 GPH ANTI-AIRLOCK DESIGN: Engineered to restart reliably, even with air in the line. 316 STAINLESS STEEL MOTOR SHAFT: Corrosion-resistant for long-term durability. PRECISION BALANCED MOTOR: Runs smoother with reduced vibration and noise. REMOVABLE NOZZLE: Allows quick service without disconnecting the hose. STATOR VANE TECHNOLOGY: Optimizes flow efficiency and performance. POSITIVE-LOCK STRAINER BASE: Mounting pattern matches most manufacturers. DUAL LOCK CARTRIDGE: Designed for quick removal and fast service. INCLUDES: Straight & 90º Outlet, Backflow Restrictor, and Flat Seal Specifications: Gallons Per Hour: 800 GPH Gallons Per Minute: 13 Type: Pumps/Drives Volts: 12 Box Dimensions: 6"H x 6"W x 9"L WT: 1.55 lbs UPC: 733572258295

Read more less

Quad Pump - 12VDCBILGE-B-DRY is the world’s only Smart Device enabled Dry Bilge System on the market!Enjoy simple installation and customized scheduling control at your fingertips with our Mobile App for Apple or Android devices. Due to size and placement, traditional bilge pumps cannot remove the last few inches of excess water accumulating in your bilge. With BILGE-B-DRY, you can finally eliminate cabin odors, reduce mold or corrosion, and protect your electrical wiring by removing every drop of water from your bilge. Your cabin will be odor-free, and your bilge will be the driest and cleanest at the marina!Why choose BILGE-B-DRY? Take advantage of: The world’s ONLY Smart Device enabled Dry Bilge System on the market with customizable operation!  An efficient, reliable method to remove excess bilge water on all boats, including stepped-hull boats where water sits forward of the “step. Use BILGE-B-DRY after washdown, heavy rain or sea spray accumulation, rough seas, untreated leaks, etc.  Heavy-duty pump enclosure with improved durability, enhanced pump efficiency, and streamlined internal plumbing. A choice of four pump configurations in 12vdc or 24vdc for optimal water removal. The pump diaphragm design can run dry for extended periods without damage. A compact pump design for easy installation in tight or awkward spaces in any orientation (horizontal or vertical). Customized pump scheduling with the free Mobile App for Apple and Android devices.  Quick disconnect wiring harness with optional connection to a helm or float switch.  An environmentally friendly low-profile bilge water pickup design with a replaceable filter system.  Configured to automatically cycle for 2 minutes every 6 hours if you decline Smart Device connectivity. BILGE-B-DRY connects to your Smart Device (if desired) through the free Mobile App on the APPLE & GOOGLE PLAY stores. Customizable operation is at your fingertips with two options:  Run the “TIMER” option up to 20 minutes after boating in heavy seas or upon washdown.  Choose the “SCHEDULE” option for five customizable run times during the day, up to 20 minutes. This is a great option if you will be away from your boat for a few weeks.  Example:  With your Smart Device, schedule your BILGE-B-DRY to run at 9:00 AM for three minutes and again at 3:00 PM for two minutes. The schedules will run daily until canceled. If at 8:00 PM you still see water in your bilge, run the on-demand Timer for up to 20 minutes to remove the remaining water. BBD Quad Pump 12VDC:Four motors/diaphragm pumps20 feet of input tubing provided (for pickup)6 feet of output tubing provided (for discharge)Input tubing diameter (PVC or PU) - 1/4” OD Output tubing diameter (PVC or PU) - 3/8” ODIncluded with your BILGE-B-DRY purchase are low-profile bilge water pickups. Our uniquely designed low-profile bilge water pickup (bracket sold separately) with a replaceable filter helps reduce the harmful overboard discharge of heavy metals, solids, and petroleum. Place the pickups wherever you wish to remove water, such as the lowest part of your bilge, A/C evaporator, or hard-to-reach compartments. Twenty small holes along the bottom of the pickup provide a debris barrier. The pickup’s integrated filter contains a proprietary blend of materials to prevent damage to the BILGE-B-DRY pump and to reduce oil discharge, which, unlike other dry bilge systems, eliminates the need for a secondary filter.For optimum performance of your BILGE-B-DRY unit, replace the low-profile bilge water pickups when the flow rate has decreased. You can choose to replace the filter material or replace the entire pickup. BILGE-B-DRY orders DO NOT INCLUDE the stainless hold-down bracket or inline fuse!Specifications: Meets ISO 8846 standards, Section 5, Protection against ignition of surrounding flammable gases. Power Required:  12 VDC (8 – 14 VDC)  Max current: 1.4 amps (12 VDC)  Idle Current: 0.05 amps (12 VDC)  Pump:  Maximum flow: 1.0 GPM  Pump head: 10 feet  Pump suction: 5 (vertical) feet  Diaphragm design, able to run dry for extended periods without damage  Life expectancy >1000 hours  Control board:  Wireless Connectivity  Life expectancy: 100,000 cycles  Working temperature: - 40 85 °C  Wi-Fi & RF Grant FCC Rule Part 15C  Dimensions (in):  Enclosure: 4.1 H x 6.8 W x 7 L  Rectangular Pickup: 0.98 H x 2.4 W x 3.9 L Dimensions (mm):  Enclosure: 76 H x 172 W x 177 L  Rectangular Pickup: 25 H x 60 W x 100 L Weight 2.4 LB (not including tubing, pickup, or accessories)  Tubing:  Input tubing: 1/4" Outer Diameter  Output tubing: 3/8" Outer Diameter  Use Polyvinyl chloride (PVC) or Polyurethane (PU) tubing  Hardness Shore A 80 or higherThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

Gulper IC Waste Pump - 24VWhale BP2084B Gulper IC Electric Grey Water Pump 19LPM, 24V for use with the Whale Grey IC and Gulley IC system.Features: Whale Gulper Technology Powerful multi-purpose wastewater pump For use in the Whale Grey IC and Gulley IC systems Free flow valves - no filter required, no clogging, no cleaning Up to 19 liters/minute Large single diaphragm Easy to mount, quick installation, and secure hold on uneven surfaces The head can be rotated 360 degrees and adapts to any mounting situation Simply adjust the head with only one screw Easy maintenance with the EZ clamp ring Can run dry and pump an air/water mixture Rotatable pump head performance complies with ISO15083

Read more less

HYDRA™ Livewell Pump - 600 GPH - 12V - Short NozzleThe T-H Marine HYDRA™ Livewell Pump is engineered for consistent livewell circulation with simplified service and dual-function capability for serious anglers. Backed by 4,000 hours of testing, HYDRA delivers dependable performance through an anti-airlock design that ensures reliable restarts—even when air is present in the line.Designed for durability in harsh marine environments, the pump features a precision-balanced motor and a 316 stainless steel motor shaft to reduce vibration, noise, and corrosion over time. Stator vane technology optimizes flow efficiency, while the dual-lock cartridge design allows fast motor removal and service without disconnecting hoses or plumbing.Built with versatility in mind, the HYDRA Livewell Pump includes a secondary outlet for wash-down applications, an integrated sealant channel to prevent leaks, and both short and long threaded intake options for flexible installations. Available in 600, 800, and 1100 GPH configurations and meeting ABYC, ISO, and U.S. Coast Guard standards, HYDRA is the premium solution for reliable livewell performance.Features: ANTI-AIRLOCK DESIGN: Engineered to restart reliably, even with air in the line. 316 STAINLESS STEEL MOTOR SHAFT: Corrosion-resistant for long-term durability. PRECISION BALANCED MOTOR: Runs smoother with reduced vibration and noise. REMOVABLE NOZZLE: Allows quick service without disconnecting the hose. STATOR VANE TECHNOLOGY: Optimizes flow efficiency and performance. DUAL-LOCK CARTRIDGE: Designed for quick removal and fast service. SECONDARY OUTLET: Dedicated outlet for wash-down pump. SEALANT CHANNEL: Integrated to prevent leaks. SHORT: 1.5" (3/4"-14) Threaded intake tube (Hole installation size: 1-1/16") FLOW RATE: 600 GPH AMP DRAW: Approx. 3A FUSE SIZE: 4 AMP INSTALL HOLE: 1-1/16" Specifications: Gallons Per Hour: 600 GPH Gallons Per Minute: 10 Type: Pumps/Drives Volts: 12 Box Dimensions: 6"H x 6"W x 9"L WT: 1.05 lbs UPC: 733572258257

Read more less

HYDRA™ Livewell Pump - 800 GPH - 12V - Short NozzleThe T-H Marine HYDRA™ Livewell Pump is engineered for consistent livewell circulation with simplified service and dual-function capability for serious anglers. Backed by 4,000 hours of testing, HYDRA delivers dependable performance through an anti-airlock design that ensures reliable restarts—even when air is present in the line.Designed for durability in harsh marine environments, the pump features a precision-balanced motor and a 316 stainless steel motor shaft to reduce vibration, noise, and corrosion over time. Stator vane technology optimizes flow efficiency, while the dual-lock cartridge design allows fast motor removal and service without disconnecting hoses or plumbing.Built with versatility in mind, the HYDRA Livewell Pump includes a secondary outlet for wash-down applications, an integrated sealant channel to prevent leaks, and both short and long threaded intake options for flexible installations. Available in 600, 800, and 1100 GPH configurations and meeting ABYC, ISO, and U.S. Coast Guard standards, HYDRA is the premium solution for reliable livewell performance.Features: ANTI-AIRLOCK DESIGN: Engineered to restart reliably, even with air in the line. 316 STAINLESS STEEL MOTOR SHAFT: Corrosion-resistant for long-term durability. PRECISION BALANCED MOTOR: Runs smoother with reduced vibration and noise. REMOVABLE NOZZLE: Allows quick service without disconnecting the hose. STATOR VANE TECHNOLOGY: Optimizes flow efficiency and performance. DUAL-LOCK CARTRIDGE: Designed for quick removal and fast service. SECONDARY OUTLET: Dedicated outlet for wash-down pump. SEALANT CHANNEL: Integrated to prevent leaks. SHORT: 1.5" (3/4"-14) Threaded intake tube (Hole installation size: 1-1/16" FLOW RATE: 800 GPH AMP DRAW: Approx. 4A FUSE SIZE: 5 AMP INSTALL HOLE: 1-1/16" Specifications: Gallons Per Hour: 800 GPH Gallons Per Minute: 13 Type: Pumps/Drives Volts: 12 Box Dimensions: 6"H x 6"W x 9"L WT: 1.25 lbs UPC: 733572258271

Read more less

HYDRA™ Livewell Pump - 800 GPH - 12V - Long NozzleThe T-H Marine HYDRA™ Livewell Pump is engineered for consistent livewell circulation with simplified service and dual-function capability for serious anglers. Backed by 4,000 hours of testing, HYDRA delivers dependable performance through an anti-airlock design that ensures reliable restarts—even when air is present in the line.Designed for durability in harsh marine environments, the pump features a precision-balanced motor and a 316 stainless steel motor shaft to reduce vibration, noise, and corrosion over time. Stator vane technology optimizes flow efficiency, while the dual-lock cartridge design allows fast motor removal and service without disconnecting hoses or plumbing.Built with versatility in mind, the HYDRA Livewell Pump includes a secondary outlet for wash-down applications, an integrated sealant channel to prevent leaks, and both short and long threaded intake options for flexible installations. Available in 600, 800, and 1100 GPH configurations and meeting ABYC, ISO, and U.S. Coast Guard standards, HYDRA is the premium solution for reliable livewell performance.Features: ANTI-AIRLOCK DESIGN: Engineered to restart reliably, even with air in the line. 316 STAINLESS STEEL MOTOR SHAFT: Corrosion-resistant for long-term durability. PRECISION BALANCED MOTOR: Runs smoother with reduced vibration and noise. REMOVABLE NOZZLE: Allows quick service without disconnecting the hose. STATOR VANE TECHNOLOGY: Optimizes flow efficiency and performance. DUAL-LOCK CARTRIDGE: Designed for quick removal and fast service. SECONDARY OUTLET: Dedicated outlet for wash-down pump. SEALANT CHANNEL: Integrated to prevent leaks. LONG: 3.5" (3/4"-14) Threaded intake tube (Hole installation size: 1-1/16") FLOW RATE: 800 GPH AMP DRAW: Approx. 4A FUSE SIZE: 5 AMP INSTALL HOLE: 1-1/16" Specifications: Gallons Per Hour: 800 GPH Gallons Per Minute: 13 Type: Pumps/Drives Volts: 12 Box Dimensions: 6"H x 6"W x 9"L WT: 1.3 lbs UPC: 733572258288

Read more less

HYDRA™ Automatic Bilge Pump - 800 GPH - 12VThe T-H Marine HYDRA™ Automatic Bilge Pump is engineered for reliable, high-performance water removal with long-term durability built in. Backed by 4,000 hours of testing, HYDRA delivers dependable operation through its advanced anti-airlock design, ensuring reliable restarts even when air is present in the line. A precision-balanced motor with a 316 stainless steel motor shaft reduces vibration, noise, and corrosion for smooth, long-lasting performance in harsh marine environments.Designed for simplified service and OEM-friendly installation, HYDRA features a removable nozzle for quick maintenance without disconnecting hoses and a positive-lock strainer base that matches most standard mounting patterns. The integrated Sure-Start™ float switch and programmed start delay prevent false starts and extend pump life, while the external test knob allows fast manual operation checks. Available in 800 GPH and 1100 GPH models and meeting all major ABYC, ISO, and U.S. Coast Guard standards, HYDRA is built for confidence on every outing.Features: FLOW RATE: 800 GPH AMP DRAW: Approx. 4A FUSE SIZE: 5 AMP ANTI-AIRLOCK DESIGN: Engineered to restart reliably, even with air in the line. 316 STAINLESS STEEL MOTOR SHAFT: Corrosion-resistant for long-term durability. PRECISION BALANCED MOTOR: Runs smoother with reduced vibration and noise. REMOVABLE NOZZLE: Allows quick service without disconnecting the hose. STATOR VANE TECHNOLOGY: Optimizes flow efficiency and performance. POSITIVE-LOCK STRAINER BASE: Mounting pattern matches most manufacturers. SURE-START FLOAT SWITCH: Corrosion-proof design for a reliable start every time. EXTERNAL TEST KNOB: Allows for quick manual testing. INCLUDES: Straight & 90º Outlet, Backflow Restrictor, and Flat Seal. This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Gallons Per Hour: 800 GPH Gallons Per Minute: 13 Type: Pumps/Drives Volts: 12 Box Dimensions: 6"H x 6"W x 9"L WT: 1.2 lbs UPC: 733572258301

Read more less

Standard Automatic Float Switch - 12/24 VDCThe SHURFLO series float switches provide the ultimate in reliability for your boat. Features: 3' Tinned Wire Assembly Non-Mercury Remote or Direct Mounting Ignition Protected 3 Year Warranty This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Volts: 12/24v Type: Switches Box Dimensions: 3"H x 6"W x 9"L WT: 0.45 lbs UPC: 752324010615

Read more less