Raptor Wireless Footswitch - BluetoothRaptor wireless foot switch allows for hands free control of your Raptor. Control one or two Raptors independently or simultaneously. Foot switch is waterproof, includes LED indicator lights and has an easy access battery compartment. Features: Enable or disable Active Anchoring Anchor mode selection of Auto-Bottom, Standard, Rough Water, or Soft Bottom Change deployment and retraction speed Selection and control of single or dual Raptors LED display of anchor mode for single or dual Raptors Modular deck mount for easy removal and storage Automatic up/down Waterproof and floats Battery included Owner's Manual (pdf)

Read more less

Talon Tilt BracketEasy-tilt action accommodates for low clearance areas and boat storage. Marine-grade, anodized aluminum construction for strength and durability. Adjustable deck support provides stability while tilting. Requires use of a Talon Adapter Bracket - not intended for use with Talon direct-mounted to hull of boat. Designed for temporary clearance - not intended for transport (on water or trailering). Stainless steel hardware and Talon crutch support included. Compatible with all three-stage, 8 ft., 10 ft., and 12 ft. Talon shallow water anchors.

Read more less

Guardian G-7 - Clip Set Original replacement clip set for the G-7 anchor.  Includes mounting hardware.*Sold as an Individual

Read more less

FX-7 - Clip Set Original replacement clip set for the FX-7 anchor.FOR RED LOGO ANCHORS ONLY (2006 AND NEWER)  Includes mounting hardware.*Sold as an Individual

Read more less

Guardian G-11 - Mud Palm Set - Pair Original replacement mud palms for the G-11 anchor.Includes mounting hardware.*Sold as a Pair

Read more less

FX-85 - Stock Original replacement stock for the FX-85 anchor.FOR RED LOGO ANCHORS ONLY (2006 AND NEWER)*Sold as an Individual

Read more less

Raptor Adapter Bracket 2" Spacer - Black Mounts between your jack plate or sandwich adapter and jack plate adapter bracket, for use in port or starboard applications.Features: Provides 2” of additional outboard engine clearance by spacing raptor mounting brackets from jack plate Light-weight, single-piece aluminum construction for superior strength Powder-coated exterior resists corrosion in all environments and applications Includes stainless steel mounting hardware Slotted mounting holes for position adjustment 5-year warranty

Read more less

Raptor Jack Plate Adapter Bracket - Starboard - 5" Setback - 4" Rise - BlackMounts directly to your jack plate on the starboard side of your boat providing 5 inches of setback and 4 inches of vertical rise for Minn Kota Raptor Shallow Water Anchors Features: Adds 5 inches of setback from the transom and 4 inches of vertical rise Lightweight, single-piece aluminum construction for superior strength Powder-coated exterior resists corrosion in all environments and applications Includes stainless steel mounting hardware Slotted mounting holes for position adjustment 5-year warranty Brochure (pdf)

Read more less

FX-23 - StockOriginal replacement stock for the FX-23 anchor.FOR RED LOGO ANCHORS ONLY (2006 AND NEWER)*Sold as an Individual

Read more less

Spare Pole Clips - RubberIf you are looking to mount your poles in more than one location or lost the clips that come with your poles these are the exact replacements.

Read more less

Fixed Anchor Swivel - 3/8" to 7/16"Heavy-duty 360-degree anchor swivel.  Used to attach line and chain or chain and anchor.Compatible with:3/8" to 7/16" ChainFeatures: Stainless Steel screw pins Stainless Steel swivel pins Technical Specifications:Material - 316 Stainless Steel*Sold as an Individual

Read more less

V700 Fastening Kit 1 (Metric) Replacement fastening kit 1 for V700 windlasses.Compatible With:Lewmar V700 windlass*Sold as an Individual Owner's Manual (pdf)

Read more less

Anchor release system for small boats in still-water fishing situations. Easy lock and release action allows anchor line adjustments with only one hand. For use with rope up to 1/2" diameter. Tough construction and roller bearing for smooth, quiet operation. Includes a No. 241 Side/Deck MountWARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

FX-11 - Clip Set Original replacement clip set for the FX-11 anchor.FOR RED LOGO ANCHORS ONLY (2006 AND NEWER)  Includes mounting hardware.*Sold as an Individual

Read more less

3" Raptor Setback Bracket - BlackProvides 3” of additional setback to all mounting applications where specific clearances are required for Raptor Shallow Water Anchors.Features: Light weight, single-piece aluminum construction for superior strength Powder coated exterior resists corrosion in all environments and applications Includes stainless steel mounting hardware 5-year warranty Brochure (pdf)

Read more less

Stowage Bag for AP5 & AP8 AnchorYou can stow or transport your folded Ankerplex® in a useful and resistant synthetic bag of the appropriate size for each model. Manufactured in a bright orange color, making it easy to locate. Ideal complement to your Ankerplex.Available Sizes: Ref. AB1: For model AP1 Ref. AB2: For model AP5 and AP8 Ref. AB3: For model AP11 and AP16 Ref. AB4: For model AP20, AP27 and AP31 Ref. AB5: For model AP50 and AP60

Read more less

Stowage Bag for AP50 & AP60 AnchorYou can stow or transport your folded Ankerplex® in a useful and resistant synthetic bag of the appropriate size for each model. Manufactured in a bright orange color, making it easy to locate. Ideal complement to your Ankerplex.Available Sizes: Ref. AB1: For model AP1 Ref. AB2: For model AP5 and AP8 Ref. AB3: For model AP11 and AP16 Ref. AB4: For model AP20, AP27 and AP31 Ref. AB5: For model AP50 and AP60

Read more less

Stowage Bag for AP20, AP37, & AP31 AnchorYou can stow or transport your folded Ankerplex® in a useful and resistant synthetic bag of the appropriate size for each model. Manufactured in a bright orange color, making it easy to locate. Ideal complement to your Ankerplex.Available Sizes: Ref. AB1: For model AP1 Ref. AB2: For model AP5 and AP8 Ref. AB3: For model AP11 and AP16 Ref. AB4: For model AP20, AP27 and AP31 Ref. AB5: For model AP50 and AP60

Read more less

Stowage Bag for AP11 & AP16 AnchorYou can stow or transport your folded Ankerplex® in a useful and resistant synthetic bag of the appropriate size for each model. Manufactured in a bright orange color, making it easy to locate. Ideal complement to your Ankerplex.Available Sizes: Ref. AB1: For model AP1 Ref. AB2: For model AP5 and AP8 Ref. AB3: For model AP11 and AP16 Ref. AB4: For model AP20, AP27 and AP31 Ref. AB5: For model AP50 and AP60

Read more less

Stowage Bag for AP1 AnchorYou can stow or transport your folded Ankerplex® in a useful and resistant synthetic bag of the appropriate size for each model. Manufactured in a bright orange color, making it easy to locate. Ideal complement to your Ankerplex.Available Sizes: Ref. AB1: For model AP1 Ref. AB2: For model AP5 and AP8 Ref. AB3: For model AP11 and AP16 Ref. AB4: For model AP20, AP27 and AP31 Ref. AB5: For model AP50 and AP60

Read more less

Chafe Guard Black for Lines up to 3/4"-1" DiameterBuilt from rugged and durable polyurethane, this rope protector has a patented technology that allows it to automatically wrap itself around a rope and provide long-term chafe protection.Features: Made in the USA Rugged polyurethane stands up to chafe and abrasion Self-wraps around the line several times for a snug and firm fit Resists rot, grime, and UV longer than other chafe gear Will not streak Removable Fast & easy to apply Specifications: Chafe Guard Size: 23.50″ Long x 9″ wide (unrolled) Fits Lines Up To: 3/4”-1” Weight: 6 oz Color: Black Material: Polyurethane Ultimate Tensile Strength: 10,000 PSI Ultimate Elongation: 450% Vicat Softening Point: 92 Degrees C

Read more less

Pro Series Windlass Gypsy #516 Replacement gypsy on Windlass Model Pro-Fish/Series 1000Features: Rope-chain gypsy Cone clutch for smooth, easy control Manual Free Fall W.A.R.P Drum Robust and reliable drivetrain Manual override (optional) Technical Specifications: Rope Size - 9/16 to 5/8" (14.29 to 15.85 mm) (3 strand hard lay up) Chain Size - 5/8" (15.85 mm) ( Campbell S3, Lewmar 9.5mm G40) *Sold as an Individual 

Read more less

Pro Series Seals, Dowels & Screws Kit Seals, Dowels, and Screws Kit for Generation 1 and 2 Pro-Series/Fish Series windlasses.Compatible With:Lewmar windlasses - Generation 1 and 2In the Box: Dowel 1/4" x 1 1/4" x three (3) Dowel, 6 x 30 mm x one (1) Dowel, 8 x 45 mm x one (1)  Socket HD cap screw 10-24UNC x 1 1/4" x six (6) Wiper seal x two (2) *Sold as an Individual 

Read more less

Snubber - Rubber - 1/2" to 9/16"Mooring Snubbers absorb shock loads and relieve tension on lines and deck fittings. The length of compensating movement can be adjusted by the number of line turns around the snubber, mitigating the effects of wind and waves. Easy to use, requiring no extra hardware. Ideal for use in tidal areas, on exposed moorings, or in towing situations. Constructed of high-quality rubber to resist sunlight, saltwater, and ozone.

Read more less

SH8 Anchor Bullet Swivel - 8mm Stainless Steel Bullet Swivel -f/11-44lb. AnchorsA swivel or shackle between the anchor and rode is necessary for the anchor to enter the bow roller properly and for the rode to be retrieved without it twisting.

Read more less

ANCHOR SWIVEL SHACKLESThe use of a swivel and joining shackles to join your anchor and rode will greatly improve anchor retrieval and help ensure that the rode lays neatly into your anchor locker. Thus, they are highly recommended for use with Maxwell's automatic rope/chain series windlasses. Two sizes (6mm - 8mm/1/4" - 5/16" and 10mm - 12mm/3/8" - 7/16") are available to suit vessels up to 20 metres (65'). These robust single swivel anchor connectors, with captured pins, will not loosen under load and pull smoothly and easily over bow rollers. Quick Guide (pdf)Brochure (pdf)

Read more less

ANCHOR SWIVEL SHACKLESThe use of a swivel and joining shackles to join your anchor and rode will greatly improve anchor retrieval and help ensure that the rode lays neatly into your anchor locker. Thus, they are highly recommended for use with Maxwell's automatic rope/chain series windlasses. Two sizes (6mm - 8mm/1/4" - 5/16" and 10mm - 12mm/3/8" - 7/16") are available to suit vessels up to 20 metres (65'). These robust single swivel anchor connectors, with captured pins, will not loosen under load and pull smoothly and easily over bow rollers. Quick Guide (pdf)Brochure (pdf)

Read more less

Raptor Jack Plate Adapter Bracket - Starboard - 8" Setback - 6" Rise - WhiteMounts directly to your jack plate on the starboard side of your boat providing 8 inches of setback and 6 inches of vertical rise for Minn Kota Raptor Shallow Water Anchors.Features: Adds 8 inches of setback from the transom and 6 inches of vertical rise Lightweight, single-piece aluminum construction for superior strength Powder-coated exterior resists corrosion in all environments and applications Includes stainless steel mounting hardware Slotted mounting holes for position adjustment 5-year warranty Brochure (pdf)

Read more less

AnchorSnubber20" LongEases the tension on the anchor chain, rode or snubber line. Eliminates chain noise and shock loads to chain, anchor roller, windlass, cleats.

Read more less

FX-16 - Fluke Original replacement fluke for the FX-16 anchor.FOR RED LOGO ANCHORS ONLY (2006 AND NEWER)*Sold as an Individual

Read more less

Raptor Travel Cover for 8'Protects 8' Raptor models from road hazards while trailering. Custom-fit with an all-weather, corrosion-resistant zipper. UV resistant black vinyl. Not intended for use while on the water.Features: Compatible with 8' Raptor Models Only Color: Black

Read more less

SW10 Anchor Swivel - 10mm Stainless Steel Jaw Jaw Swivel - f/16-44lb. AnchorsStainless Steel Jaw Jaw Swivel

Read more less

Anchor Ring & RopeAssists in anchor retrieval. Designed to lift anchor systems up to 80lbs where 10' or more of anchor chain is used. Lifting capacity based on anchor buoy size. *Buoy sold separately.

Read more less

FX-16 - Mud Palm Set - Pair Original replacement mud palms for the FX-16 anchor.FOR RED LOGO ANCHORS ONLY (2006 AND NEWER)Includes mounting hardware.*Sold as a Pair

Read more less

FX-11 - Mud Palm Set - Pair Original replacement mud palms for the FX-11 anchor.FOR RED LOGO ANCHORS ONLY (2006 AND NEWER)Includes mounting hardware.*Sold as a Pair

Read more less

FX-11 - StockOriginal replacement stock for the FX-11 anchor.FOR RED LOGO ANCHORS ONLY (2006 AND NEWER)*Sold as an Individual

Read more less

FX-7 - Mud Palm Set - Pair Original replacement mud palms for the FX-7 anchor.FOR RED LOGO ANCHORS ONLY (2006 AND NEWER)Includes mounting hardware.*Sold as a Pair

Read more less

FX-7 - Stock Original replacement stock for the FX-7 anchor.FOR RED LOGO ANCHORS ONLY (2006 AND NEWER)*Sold as an Individual Quick Guide (pdf)

Read more less

Stainless Steel Anchor Swivel for Chain Size 1/4"-5/16"316 stainless steel swivel anchor connectors are designed to easily slide over anchor rollers, preventing snagging, minimizing wear on the bow roller and windlass. These precision, high quality swivels feature double locking pins for extra security. Can be used between anchor and chain or between chain and line.Specifications: Chain Size: 1/4" to 5/16" Strength: 5500lbs Material: Stainless Steel Length: 3-9/16" Width: 5/8" WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

"It Floats™" - Locking Winch Handle - Injection Molded Fiberglass Nylon"It Floats™" Locking Winch Handle features a patented design. Made by air assist injection molding instead of the traditional foam-filled method, preventing any potential leakage of foam from within the handle. Ball bearings in the handle ensure smoother action under load. Fits in the dip molded PVC Winch Handle Holder (724200) sold separately.

Read more less

Deluxe Anchor Trolley with PulleysThe Deluxe Anchor Trolley will help users stop being victims of changing winds and currents while fishing in an anchored position. The YakGear Deluxe Anchor Trolley Kit allows the deployment of any anchor, drift chute, or stake-out pole before judging the current and wind while still remaining in a favorable fishing position. Without a trolley, users are limited to anchoring where it is reachable, causing the boat to swing back and forth. Mounted just off of the gunwale of any kayak or canoe, the deluxe trolley kit uses a nylon pulley system to select a desirable position anywhere from bow to stern, then maintains the positioning through the use of a 2-5/16-inch mini zig-zag cleat.The deluxe system uses Harken pulleys to seamlessly pass trolley rope from bow to stern without the standard rubbing of rope along slightly less smooth pad eyes. The mounted pulleys are raised off of the boat enough to eliminate any unnecessary rubbing or scratching of the boat. As always, this complete kit comes with all stainless steel installation hardware, installation instructions, and rigging tips from YakGear. Waterproof silicone and anchors are recommended but not included.Features: Deluxe anchor trolley system with Harken pulleys It allows the bow of your vessel to turn into the current for a smoother experience A mini zig-zag cleat is included, assisting in maintaining stable positioning Installation instructions and hardware are included The kit also includes 30 ft. of rope 1-year warranty

Read more less

Anchor Rope - 3/16" x 100' with Stainless Steel Shackle Premium Anchor Rope works for all brands of electric anchor winches in fresh and salt water use.  Features a professional eye splice, stainless steel thimble and traditional thread whipping to secure the thimble and splice.Rope is manufactured with a reflective tracer that is easily visible in near-darkness.Features: For all brands of electric anchor winches, saltwater and freshwater use Factory loop and Stainless Steel thimble adds strength and durability Technical Specifications: Size - 3/16" (5 mm) x 100' (30 M) Color - Blue with reflective tracer Breaking Strength - 800 lb *Sold as an Individual WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Chain - Diameter (Inches): N/A Chain - Length (Feet): N/A Rope Diameter (Inches): 3/16" Rope Length (Feet): 100' Box Dimensions: 3"H x 5"W x 5"L WT: 1.2 lbs UPC: 666996101185

Read more less

5" Set Back Transom Mount Bracket - Clear - AnodizedPanther KPS50A Transom Mount Brackets comes a length of 5" and built from quality and durable materials for use in marine environments. Signature Pole LockAll brackets are equipped with a proprietary, integrated pole lock. Just flip the lever to secure the pole in the bracket. No loose parts that can fall in the water.Features: No loose parts that can fall in the water Anodized material Signature Pole LockAll brackets are equipped with a proprietary, integrated pole lock Quick and easy installation

Read more less

Single-Hook Anchor Chain Tensioner for 3/8" ChainThese fittings will securely tension and hold the anchor in the bow roller channel.  They will free up use of the bow cleat and prepare the anchor for sea condition assuring you peace of mind.  This fitting is not designed to take the strain of the rode of a boat at anchor.  "Single Hook" style has overall length of 12", the threaded hook has 1-1/2" of adjustment for ease of installation.

Read more less

Single-Hook Anchor Chain Tensioner for 5/16" ChainThese fittings will securely tension and hold the anchor in the bow roller channel.  They will free up use of the bow cleat and prepare the anchor for sea condition assuring you peace of mind.  This fitting is not designed to take the strain of the rode of a boat at anchor.  "Single Hook" style has overall length of 12", the threaded hook has 1-1/2" of adjustment for ease of installation.

Read more less

SFX-7 Stowaway Bag for the FX-7 AnchorThe Fortress Stowaway Anchor Bag holds everything you need to deploy your Fortress anchor quickly.  No more searching for wrenches, shackles or chain.  With the Stowaway system, it's "in the bag."The Stowaway bags are built to last in the rugged marine environment.  The bag closure as well as the straps (which serve as convenient carrying handles) are high strength, extra wide Velcro™.  Inside each bag are pouches to hold the correct size wrenches (included) and even a spare fluke clip, bolt and nut (also included). Easy to understand diagrams are sewn into the bag to take you through anchor assembly and bag-packing procedures.*Anchor not included.Features: Custom designed for all Fortress anchors Made from top quality, rugged ballistic Cordura™ Securely holds everything - Anchor, chain, shackles and wrenches In the Box: Stowaway Bag Wrenches x 2 - 3/8" (10mm) Spare Clip/Bolt/Nut *Sold as an Individual

Read more less

FX-37 - Clip Set Original replacement clip set for the FX-37 anchor.  FOR RED LOGO ANCHORS ONLY (2006 AND NEWER)Includes mounting hardware.*Sold as an Individual

Read more less

Guardian G-11 - Crown Original replacement crown for the G-11 anchor.*Sold as an Individual

Read more less