HRC1002Multipurpose watertight hand held remote control 2 Button.HRC is the new Quick range of multipurpose hand-held remote controls, designed to for remote operation of various on-board electrically operated equipment such as cranes, gangways, windlasses, sea ladders etc. HRC is constructed with rubber inserts to ensure high strength, long durability, perfect watertightness, and a secure grip. HRC remote controls are supplied complete with a connecting cable extensible up to 4.2 metres, a watertight deck plug and socket, and a support bracket for stowing after use.

Read more less

Foot SwitchStamped 304 Stainless Steel/Rubber Cover.This Foot Switch is normally off and momentarily on when depressed by foot. Ideal for use with windlasses. Constructed of corrosion resistant stamped 304 stainless steel and rubber. Installs with ten #8 RH fasteners (not included). WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Pro-Series Generation 3 Seals & Screws Kit Replacement seals and screws kit for Pro-Series Generation 3 windlasses.Compatible With:Pro-Series Generation 3 windlass*Sold as an Individual

Read more less

Deck Foot Switch - Windlass Up - White PlasticLewmar Deck Foot Switches are single-direction switches and come ready to install.  With a hinged cover to prevent accidental operation, they are suitable for DC electric windlasses running on 12 or 24 volts and must be used with a contactor or control box. Technical Specifications: Switch Direction - Up Material - Plastic Power - 12/24V Color - White *Sold as an Individual

Read more less

WCS830 Windlass Control SwitchWindlass control board (UP/DOWN)Electric device enabling windlass even in the rudder area. IP67 front seal.

Read more less

Pro-Sport Motor - 150W - 12V Replacement motor for Pro-Sport series windlasses requiring 12 V and 150 watts.Compatible With:Pro-Sport windlasses*Sold as an Individual

Read more less

V700 Combo Gypsy - 1/4" Replacement combo gypsy for V700 windlass - 1/4" (6 mm)Compatible With:V700 WindlassTechnical Specifications: Rope Size - 1/2" (12.7 mm)  Chain Size - 1/4" (6.35 mm)  *Sold as an Individual  Owner's Manual (pdf)

Read more less

V4/C4 Motor Gearbox - 24VElectric and hydraulic motor gearboxes to suit Lewmar's windlass models V4/V5 and Lewmar's Capstan C4/C5.

Read more less

Windlass Control Solenoid - 12VDual-direction windlass control solenoid.Compatible with: Pro Sport Pro Series & Pro Fish 700 Pro Series & Pro Fish 1000 V700 Technical Specifications: Direction - Up and Down Nominal Voltage - 12 VDC Dimensions (H x W x D) - 2.5" x 2-3/8" x 2-1/8" *Sold as an Individual  

Read more less

Solenoid in Watertight Control Box - 12VHeavy-duty dual-direction solenoid that controls the up/down operations of Lewmar Concept 1 and V-Series windlasses. Features: Controls Up / Down operation Ideal for windlass installations in chain locker or other damp locations Nominal voltage - 12V *Sold as an Individual

Read more less

Deck Foot Switch - Windlass Down - Stainless SteelLewmar Deck Foot Switches are single-direction switches and come ready to install.  With a hinged cover to prevent accidental operation, they are suitable for DC electric windlasses running on 12 or 24 volts and must be used with a contactor or control box. Technical Specifications: Switch Direction - Down Material - Stainless Steel Power - 12/24V Color - Stainless Steel *Sold as an Individual

Read more less

Deck Foot Switch - Windlass Up - Stainless SteelLewmar Deck Foot Switches are single-direction switches and come ready to install.  With a hinged cover to prevent accidental operation, they are suitable for DC electric windlasses running on 12 or 24 volts and must be used with a contactor or control box. Technical Specifications: Switch Direction - Up Material - Stainless Steel Power - 12/24V Color - Stainless Steel *Sold as an Individual

Read more less

Pro-Series Clutch Nut LeverPro-Series windlass clutch nut lever (wrench) is designed for installation and tensioning of windlass free-fall mechanism.Compatible with: Pro-Series windlass Por-Fish Windlass V700 Windlass *Sold as an Individual

Read more less

Dual Direction Solenoid - 12VA replacement dual-direction sealed solenoid/contactor that controls up/down direction.Compatible with: Horizon windlasses  Sprint 600 & 1000 windlasses Pro Series 700 & 1000 windlasses Pro Fish 700 & 1000 windlasses  Technical Specifications: Nominal Voltage - 12V Direction - Up/Down *Sold as an Individual

Read more less

Stripper Arm Kit For Freedom 800Trouble free transition from rope to chain by means of an innovative pressure arm system within a safer enclosed design.

Read more less

REMOTE UP/DOWN CONTROLEasy to use panel-mounted Up/Down switch for remote windlass operation from the helm, flying bridge or cockpit. Available for use with dual-directional solenoids. Manufactured from marine-grade materials. Splash proof. Suitable for use with DC 12V or 24V dual-directional solenoids. Quick Guide (pdf)Brochure (pdf)

Read more less

Reversing Solenoid Pack - 24VMaxwell Reversing Solenoid Pack 24V, replaces P19046.

Read more less

P10068 Motor - 12VPermanent magnet replacement windlass motorUsed in the Freedom 500, VC500, VW500 and the VWC500 windlassesThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

V1/V2/V3 Gypsy and Stripper Kit (No. 000)Replacement gypsy and stripper for Lewmar V1, V2 and V3 windlasses and the obsolete model Concept 1 windlass. Compatible With: V1, V2, V3 and Concept 1 windlassesTechnical Specifications: Rope Size - 1/2" (13 mm) (3 strand) Chain Size - 1/4" (6 mm) (G4) *Sold as an Individual 

Read more less

V4/V5 Windlass Gypsy #203 Replacement gypsy on Windlass Model V4/V5Features: Rope-chain gypsy Cone clutch for smooth, easy control Manual Free Fall W.A.R.P Drum Robust and reliable drivetrain Manual override (optional) Technical Specifications: Rope Size - 5/8" (16 mm) (3 strand hard lay up) Chain Size - 3/8" (10 mm) ( Campbell S3, Lewmar 9.5mm G40) *Sold as an Individual 

Read more less

Replacement Pressure Arm f/HRCFF WindlassFeatures: Applications: HRCFF Sold Individually

Read more less

FOOTSWITCHMaxwell heavy-duty, weather resistant units have a UV stabilized water proof diaphragm and are supplied complete with mounting instructions and screws. Rated at 200 amps and suitable for 12V or 24V applications. Nickel-plated copper contacts ensure corrosion-free reliable operation UV stabilized plastic Quick Guide (pdf)Brochure (pdf)

Read more less

V1/V2/V3 Gypsy and Stripper Kit (No. 002)Replacement gypsy and stripper for Lewmar V1, V2 and V3 windlasses and the obsolete model Concept 1 windlass. Compatible With: V1, V2, V3 and Concept 1 windlassesTechnical Specifications: Rope Size - 1/2" to 5/8 (13 to 15.8 mm) (3 strand) Chain Size - 5/16" (7.94 mm) (G4) *Sold as an Individual 

Read more less

Stainless Steel Anchor Swivel for Chain Size 1/4"-5/16"316 stainless steel swivel anchor connectors are designed to easily slide over anchor rollers, preventing snagging, minimizing wear on the bow roller and windlass. These precision, high quality swivels feature double locking pins for extra security. Can be used between anchor and chain or between chain and line.Specifications: Chain Size: 1/4" to 5/16" Strength: 5500lbs Material: Stainless Steel Length: 3-9/16" Width: 5/8" WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Circuit Breaker - 35 AMP Panel mounted a waterproof breaker that works with DC systems up to 48 volts.  This trip-free breaker is ideal for a windlass circuit. Features: Works with DC systems up to 48 volts Clear, single lever operation Combines switching and circuit protection into a single device "Trip Free" design cannot be held "ON" during fault current condition Ignition protected Technical Specifications: Circuit Breaker Class - Type III Circuit Breaker Type - Thermally responsive bi-metal blade Maximum Voltage - 48V DC Amperage - 35 AMP Mounting - Panel Mount Weight: -.5lb (0.23 kg) *Sold as an Individual

Read more less

Plunger/Spring Kit - 2200-4500Maxwell Plunger/Spring Kit for VWX - 4 of each

Read more less

FOOTSWITCHESMaxwell heavy-duty, weather resistant units have a UV stabilized waterproof diaphragm and are supplied complete with mounting instructions and screws. Rated at 200 amps and suitable for 12V or 24V applications. Nickel-plated copper contacts ensure corrosion-free reliable operation Quick Guide (pdf)Brochure (pdf)

Read more less

"It Floats™" - Locking Winch Handle - Injection Molded Fiberglass Nylon"It Floats™" Locking Winch Handle features a patented design. Made by air assist injection molding instead of the traditional foam-filled method, preventing any potential leakage of foam from within the handle. Ball bearings in the handle ensure smoother action under load. Fits in the dip molded PVC Winch Handle Holder (724200) sold separately.

Read more less

Pro-Fish Windlass Conversion KitLewmar upgrade kit converts a Pro-Series (Series 700 and 1000) windlass to a Pro-Fish freefall windlass. The kit can only be fitted to Pro-Series (Series 700 and 1000) units made from Oct 2006 onwards.*To check compatibility undo the gypsy nut and check to see if there is a drilled threaded hole at the end of the shaft.  If no hole is visible then this cannot be retrofitted.Features: Expertly crafted from premium materials Designed to match rigorous quality standards High quality at a budget-friendly price *Sold as an Individual 

Read more less

Wireless Remote for G3 Anchor Winch Allows push-button anchor winch operation from any location.  The wireless remote clips into a handy storage bracket that can be mounted on your helm or anywhere you wish.  You have the option of using the remote anywhere in the boat, or using it like a dash-mounted switch.Compatible With:  TRAC G3 Fisherman 25 (69002/T10108-G3) and Pontoon 35 (69003/T10109-G3)Features: Allows push-button anchor winch operation from any location Wireless remote clips into a handy storage bracket  *Sold as an Individual WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Bush 1/2" NylonFeatures: 1/2" Nylon 741 330B

Read more less

Deck Foot Switch - Windlass Down - White PlasticLewmar Deck Foot Switches are single-direction switches and come ready to install.  With a hinged cover to prevent accidental operation, they are suitable for DC electric windlasses running on 12 or 24 volts and must be used with a contactor or control box. Technical Specifications: Switch Direction - Down Material - Plastic Power - 12/24V Color - White *Sold as an Individual

Read more less

Windlass Foot Switch Replacement Bezel Cover - BlackFeatures: Replacement for Maxwell P19001, P19007 and P19006 Windlass Foot Switches Size (Bezel): 4" diameter, Black Includes Required Fasteners

Read more less

Stainless Steel Chain Gripper PlateThis Chain Gripper Plate stabilizes anchor chains and reduces stress on windlass when anchored in heavy seas. The two holes are used for a bridle application with two Bow Shackles (147212) to connect lines to port and starboard cleats for stabilization. Fits anchor chain sizes: 5/16", 3/8", 7/16", and 1/2". Constructed of corrosion resistant investment cast 316 stainless steel. Installs with two RH fasteners (not included). WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Wireless Remote for G2 Anchor WinchAllows push-button anchor winch operation from any location.  The wireless remote clips into a handy storage bracket that can be mounted on your helm or anywhere you wish.  You have the option of using the remote anywhere in the boat, or using it like a dash-mounted switch.Compatible With:  TRAC G2 Fisherman 25 (T10108-G2) and G2 Pontoon 35 (T10109-G2)Features: Allows push-button anchor winch operation from any location Wireless remote clips into a handy storage bracket  *Sold as an Individual WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Windlass Clutch Retaining Clip - HalfSpare clutch half retaining clip for Maxwell 3500 VW, VWC and VWCLP windlasses

Read more less

Wired Second Switch for G3 Anchor WinchAdd a convenient second anchor winch switch. Includes everything you need to install an auxiliary switch in the location of your choice.Compatible With: TRAC G3 Fisherman 25 (69002/T10108-G3) and Pontoon 35 (69003/T10109-G3)Technical Specifications:24' Cable In the Box: Sealed switch Cable Mounting hardware *Sold as an Individual WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Chrome Brass Hinged Chain Deck PipeThis Hinged Chain Deck Pipe facilitates the storage of anchor lines out of the way below deck, reducing the risk of trip hazards on deck. The circular pipe features a hinged cap for easy access. Chain can remain in slot when the cover is closed. Constructed of die cast chrome plated brass. Installs with four #8 FH fasteners (not included). WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less