Anchor Lift SystemThis convenient system drops the anchor at the turn of a button and stores it in the anchor mount housing when not in use. Constructed of heavy gauge steel with durable powder coated finish and mounts on the bow or stern corners of most boats. Anchor secures within anchor mount housing. Mounts easily to bow or stern. Deploy anchor with the simple twist of a knob. Includes: Anchor Mount/Rope Guide Assembly  Anchor Rope Reel Assembly Rear Pulley, Rear Pulley Axel Other Features: Anchor deploys and lifts smoothly and securely.   Easy installation with detailed instructions. Multiple mounting solutions Anchor stows conveniently in anchor mount housing *Anchor, rope, and mounting hardware not included.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

G3 Anchor Winch Wireless Remote - Auto DeployThe TRAC Outdoors G3 Anchor Winch Wireless Remote allows you to wirelessly raise and lower your anchor. It provides remote control and push-button anchor winch operation.Features: Use the wireless remote anywhere in the boat For use with the TRAC G3 Fisherman 25 (69002/T10108-G3) or Pontoon 35 (69003/T10109-G3)

Read more less

Deckboat 40-G3 Electric Anchor Winch with AutoDeployThe TRAC Outdoors Deckboat 40-G3 Electric Anchor Winch with AutoDeploy allows you to automatically raise and lower your anchor with easy-to-use buttons. AutoDeploy works by simply pressing and releasing the down button.  When the anchor reaches the bottom, the winch will shut-off, holding the boat in place.  It has a maximum anchor capacity of 40 lb. and provides simple, smooth operation with excellent holding power. This winch features a high-efficiency, 12 V, all-steel gear motor that uses less battery power than other brands. *Anchor not includedTechnical Specifications: Boat Size - Up to 26' Anchor Capacity - 40 lb Anchor Deployment - Power Down or AutoDeploy Down Rope Speed Down - 70 FPM Rope Speed Up - 65 FPM Power - 12 V Dimensions (L x W x H) - 19.5" x 9.75" x 5.75"  In the Box: Winch w/integrated anchor roller 100' of 3/16" pre-wound double braid anchor rope Sealed membrane UP/DOWN/AutoDeploy switch Marine-grade battery wire - 17' Assembly hardware and  Instruction manual *Sold as an Individual WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Vertical/Horizontal: Horizontal Chain - Diameter (Inches): N/A Rope Diameter (Inches): 3/16" Freefall: No Box Dimensions: 7"H x 10"W x 16"L WT: 13.95 lbs UPC: 666996102199 Owner's Manual (pdf)

Read more less

Double Braided Nylon Dock Line - 5/8" x 50' - WhiteFeatures:  Double Braided Nylon Dock Lines 100% premium double braided nylon Professionally spliced soft eye at one end Yacht whipped at the bitter end and splice point WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Color: White Length (Feet): 50' Rope Diameter (Inches): 5/8" Tracer: No Rope Type: Braided Nylon Box Dimensions: 6"H x 6"W x 6"L WT: 7 lbs UPC: 035514303354

Read more less

WCS830 Windlass Control SwitchWindlass control board (UP/DOWN). Electric device enabling windlass even in the rudder area. IP67 front seal.

Read more less

900/UW Anchor Lifting Foot Switch - WhiteAnchor lifting switch w/safety cover to prevent accidental push-button operation.

Read more less

Corner BumperProtect your vessel from damaging impact by using premium dock corners.This air-filled bumper is constructed from PVC with UV inhibitors andfungicides. Features a built-in air valve for inflation or deflation ifnecessary. Specifications: Color: White Box Dimensions: 4"H x 9"W x 12"L WT: 1.4 lbs UPC: 776113731031

Read more less

Double Braided Nylon Dock Line - 5/8" x 35' - WhiteFeatures:  Double Braided Nylon Dock Lines 100% premium double braided nylon Professionally spliced soft eye at one end Yacht whipped at the bitter end and splice point WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Color: White Length (Feet): 35' Rope Diameter (Inches): 5/8" Tracer: No Rope Type: Braided Nylon Box Dimensions: 4"H x 10"W x 14"L WT: 4.1 lbs UPC: 035514303347

Read more less

Swivel Connector - 1-1/8" - 1-1/4" RailA vital component in the Polyform True Fit Modular System of fender holders.  The Polyform swivel connector allows a fender holder(s) to be safely and securely attached to a rail 1-1/8" to 1-1/4" in size.Polyform Recommends: Use (2) Swivel Connectors for one fender holder Use (3) Swivel Connectors when two fender holders are secured together Use (4) Swivel Connectors when three fender holders are secured together Features: Made of ABS plastic Color - Black *Sold as an Individual

Read more less

Fenderfits™ Fender Cover for F-3 and G-5 Fender - BlackFenderFits™ are fully reversible, incredibly durable and hand-washable.  Manufactured using premium quality high-bulk acrylic yarn, tested to British Standards Grade 7 lightfastness (for resistance to sunlight), the resulting fabric lasts up to 4 times longer than most competitors. FenderFits™ products are made entirely in-house at their facility in the old French port of Cannes where they're knitted on state-of-the-art machinery, hand finished by a team of professional seamstresses and individually inspected before packing.Compatible With: F-3 Fenders G-5 Fenders Features: Hand-crafted with high-bulk acrylic yarn Sun resistant Washable Custom fit for a tailored look Drawstring closure for the perfect fit Quick and easy installation *Sold as an Individual Specifications: Color: Black Box Dimensions: 1"H x 9"W x 12"L WT: 0.4 lbs UPC: 743952016407 Brochure (pdf)

Read more less

Dock Edge DocKap Premium Foam Profile Large 2" CapThe ultimate in protection systems. No need for fenders anymore! This revolutionary design incorporates a soft expanded polypropylene core surrounded by U.V. Stabilized integral skin foam. This creates the softest but most durable bumper you can treat your boat to. A molded in backer allows strong secure mounting. Unique male and female sockets at the ends make joining the pieces a snap for a seamless look. Connect DocKushion lengths end-to-end for long runs. End caps and corners complete your system for a professional, clean looking job.Product Specifications: Part No.: 1152-F Description: DocKap, Large, (2 Pcs/Pk), 2", Putty, Foam Specifications: Color: Royal Blue Box Dimensions: 2"H x 4"W x 4"L WT: 0.3 lbs UPC: 776113115206

Read more less

Polyform HTM-4 Fender 13.5" x 34.8" - White with AdapterIn keeping with the Polyform tradition of quality, the HTM (hole-through-middle) boat fender was designed to provide maximum protection in a wide variety of applications.  Vertical ribs for extra protection, reinforced tube ends to prevent lines from pulling through if the fender gets caught in a tight spot, and extra wall thickness to resist punctures and tears are just a few of the features of this high-quality fender has to offer. The HTM Series fender is designed to provide protection and stand-off for larger vessels between 20 to 50 feet in length. Features: Even wall thickness for maximum strength and durability Molded-in ribs for strength and abrasion resistance Reinforced tube ends Designed for medium-duty use in both permanent protected and unprotected moorings Unique Polyform valve for years of service One (1) piece design Technical Specifications: Size (diameter x length) - 13.5" x 34.8" (34.3 x 88.4cm) Tube Diameter - 0.625" (1.6cm) Circumference -  42.4" (107.8cm) Volume -  15.6 gallons (59.1L) Boat Size - 40' - 50' (12.2 - 15.2M) Weight - 10.5lb In the Box: Fender Inflation Adapter  *Sold as a Kit Specifications: Color: White Height: 34.8" Width: 13.5" Box Dimensions: 1"H x 3"W x 6"L WT: 10.5 lbs Brochure (pdf)

Read more less

UltraGard™ PVC Dock Bumper - 35" - BlackThis bumper is manufactured from the same quality material as our Dolphin Boat Fenders and offers the ultimate in cushioning of impacts from your boat. Molded-in ribs on the interior of the UltraGard ensure it is very soft, but durable and will not collapse. The back has a slight radius allowing for easy mounting on pilings as well. Specifications: Color: Black Box Dimensions: 3"H x 6"W x 36"L WT: 3.6 lbs UPC: 776113100868

Read more less

G-5 Twin Eye Fender 8.8" x 26.8" - Black with AdapterPolyform’s G Series boat fender has raised the bar for quality and appearance in utility fenders.  Subscribing to the philosophy that quality does not have to cost more, we include ribs for extra strength, inflation valves for larger sizes and reinforced ropeholds for long-term durability. Utility boat fenders with Polyform dependability.Features: Even wall thickness for maximum strength and durability Molded-in ribs for strength and abrasion resistance Reinforced ropeholds Designed for use by trailered boats and in permanent protected moorings Twin-eye design for vertical or horizontal use Unique Polyform valve for years of service One (1) piece design Technical Specifications: Size (diameter x length) - 8.8" x 26.8" (22.4 x 68.1cm) Eye Diameter - .75" (1.9cm) Circumference - 27.7" (70.2cm) Volume - 5.1 gallons (19.3L) Boat Size - 25' - 35' (7.6 - 10.7M) Weight - 4.45lbs In the Box: Fender Inflation Adapter  *Sold as a Kit Specifications: Color: Black Height: 26.8" Width: 8.8" Box Dimensions: 1"H x 3"W x 6"L WT: 4.6 lbs Brochure (pdf)

Read more less

Dock Edge DocKorner Premium Foam Profile Large 9" CornerThe ultimate in protection systems. No need for fenders anymore! This revolutionary design incorporates a soft expanded polypropylene core surrounded by U.V. Stabilized integral skin foam. This creates the softest but most durable bumper you can treat your boat to. A molded in backer allows strong secure mounting. Unique male and female sockets at the ends make joining the pieces a snap for a seamless look. Connect DocKushion lengths end-to-end for long runs. End caps and corners complete your system for a professional, clean looking job.Product Specifications: Part No.: 1151-F Description: DocKorner, Large, (1 Pc/Pk), 9", Putty, Foam Specifications: Color: White Box Dimensions: 4"H x 8"W x 8"L WT: 1.5 lbs UPC: 776113115107

Read more less

Spring-Pressure Arm for RC6, 8 & 10Maxwell Spring-Pressure Arm specifically for RC6, RC8 and RC10.

Read more less

Poly Pro Anchor Line with Snap - 1/4" x 50' - YellowHollow Braid Anchor Line with Snap.Features: 100% premium multi-filament polypropylene floating rope Plated steel Spring Hook (155630) Packaged in a reusable clamshell pack (304206050YW-1) or easy to dispense spool WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Rope Diameter (Inches): 1/4" Rope Length (Feet): 50' Rope Type: Polypropylene Box Dimensions: 3"H x 6"W x 10"L WT: 0.8 lbs UPC: 035514304016

Read more less

Dock Edge DocKushion Premium Foam ProfilePart No. 1150-F DocKushion, Large 48" FoamThe ultimate in protection systems. No need for fenders any more! This revolutionary design incorporates a soft expanded polypropylene core surrounded by U.V. Stabilized integral skin foam. This creates the softest but most durable bumper you can treat your boat to. A molded in backer allows strong secure mounting. Unique male and female sockets at the ends make joining the pieces a snap for a seamless look. Connect DocKushion lengths end-to-end for long runs. End caps and corners complete your system for a professional, clean looking job.Product Specifications: Part No.: 1150-F Description: DocKushion, Large, (1 pc/Pk), 48", Putty, Foam Specifications: Color: Grey Box Dimensions: 2"H x 4"W x 48"L WT: 3.5 lbs UPC: 776113115008

Read more less

Protect™ Straight, HD 12" PVC BumperThese Heavy Duty Bumpers are manufactured from PVC with UV Inhibitors and Fungicides, have excellent shock absorption qualities and will not mark or mar the hull of your boat. The Protect™ Straight Bumpers also have many industrial applications where cushioning and protection are required.WARNING: This product can expose you to chemicals including Titanium dioxide,Vinyl Chloride which are known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov. Specifications: Color: White Box Dimensions: 2"H x 3"W x 12"L WT: 0.6 lbs UPC: 776113105801

Read more less

5lb Mushroom AnchorThe YakGear 5-pound Mushroom Anchor is perfect for anchoring kayaks, canoes, stand-up paddleboards, and even jon boats in muddy, sandy, or weeded bottoms. The high-level holding strength provides additional security with a wide-area mushroom cap with drains in the base.Shaped like an inverted mushroom, the head becomes buried in the soft seabed and will normally sink to the point where it has displaced its own weight in the seabed material. Its one-piece cast iron construction combined with a tough vinyl coating ensures long-lasting, dependable use. The anchor is very popular for fishermen and race buoys.Features: 5 lb. inverted mushroom-shaped anchor Cast iron and vinyl coated in black 1-year warranty Specifications: Color: Black Construction: Carbon Fiber Weight (lbs): 5 Box Dimensions: 6"H x 6"W x 6"L WT: 5.15 lbs UPC: 853628005816

Read more less

Rail Mount Stainless Steel Fender Holder Dual - 7.5"The Rail Mount Dual Fender Holder is for use on 7/8" or 1" tubing. Easy to mount, these fender holders adjust to any angle of railing and can hold any style fender. Folds flat for easy storage when not in use. Constructed of corrosion resistant formed 304 stainless steel.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Fender HookThis fender hook can be used for quick and easy placement of fenders. Designed to be installed on the gunwale for use with up to 3/8" lineFeatures: The spring-loaded hook keeps the line captive against the surface Constructed of corrosion-resistant investment-cast 316 stainless steel with rubber gasket Installs with two #8 FH fasteners (not included) Specifications: Length (inch): 2-1/16"     Width (inch): 1-1/4 Depth (inch): 5/8" Line Size (inch): 1/4"-3/8"                             Fastener: #8 FH Weight: 0.24 lb. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

SFX-7 Stowaway Bag for the FX-7 AnchorThe Fortress Stowaway Anchor Bag holds everything you need to deploy your Fortress anchor quickly.  No more searching for wrenches, shackles or chain.  With the Stowaway system, it's "in the bag."The Stowaway bags are built to last in the rugged marine environment.  The bag closure as well as the straps (which serve as convenient carrying handles) are high strength, extra wide Velcro™.  Inside each bag are pouches to hold the correct size wrenches (included) and even a spare fluke clip, bolt and nut (also included). Easy to understand diagrams are sewn into the bag to take you through anchor assembly and bag-packing procedures.*Anchor not included.Features: Custom designed for all Fortress anchors Made from top quality, rugged ballistic Cordura™ Securely holds everything - Anchor, chain, shackles and wrenches In the Box: Stowaway Bag Wrenches x 2 - 3/8" (10mm) Spare Clip/Bolt/Nut *Sold as an Individual

Read more less

Jack Plate Mounting Bracket for Axis & Vector Shallow Water Anchors - BlackThis bracket is designed to mount your Axis or Vector shallow water anchor to your jack plate. This mounting bracket features a symmetrical design, allowing it to be mounted on either the port or starboard side. This bracket comes with all required mounting hardware.

Read more less

Aleph AL3 1012D Windlass - 12V, 1000W, 10MM Gypsy to 5/8" Rope with DrumThe AL3 vertical windlass features a hard-anodized aluminum construction, an IP67 watertight motor, an inspection lid, and an emergency manual lift system, making it suitable for boats with limited deck space. The unit includes a gearbox, solenoid, clutch handle, and mounting hardware. Features: For 33-46FT Boats Vertical windlasses 10mm - 3/8" gypsy Requires 5/8" three-strand polyester rope  Includes T6315-12 Solenoid Base in anodized aluminum with hard oxide With drum Rope and chain on a single gypsy Integrated sensor and magnet for chain counter  Manual Free-Fall system Emergency manual lift system Supplied with pressure lever Inspection lid IP67 watertight motor Technopolymer gearbox (700W / 1000W) Specifications: Motor power - 1000 W Motor supply voltage - 12 V Maximum pull - 1000 Kg / 2204 lb Maximum working load - 370 kg/816 lb     Working load - 120 kg/264 lb Current absorption @ working load - 140 A  Maximum chain speed - 39,6 m/min 129.2 ft/min Maximum chain speed @ working load - 20,4 m/min 66.9 ft/min Weight  -19,7 Kg / 43 lb

Read more less

Capstan 300Part #: P77726Versatile rope winch for anchoring, sailing & fishingThe Capstan 300 is a smaller power assisted rope capstan for a variety of uses. It has a maximum pull of 300 lbs with a retrieval speed of 85 feet per minute. Whether anchoring, sailing, or fishing, let the Capstan 300 help spare your back, speed up your retrieval process, and make your boating more pleasurable. Features: Strong pulling power of 300 lbs Quick retrieval speed of 85 ft/minute Deck mounted design - saves space for rope locker Easy to operate footswitch (included) Handles unlimited rope lengths All aluminum housing with a durable polyester paint finish Stainless steel internal shafts, fasteners, & hardware Specifications: Freefall: No Rope Diameter (Inches): 5/8" Vertical/Horizontal: Horizontal Box Dimensions: 9"H x 11"W x 16"L WT: 19.8 lbs UPC: 000000166102 Owner's Manual (pdf)

Read more less

FX-37 Anchor - 21lbFor over three decades, the much lighter Fortress Anchor has out-performed substantially heavier steel anchors in holding power tests conducted all around the world.  In the US Navy tests, not only did the Fortress out-perform heavier steel anchors, they were also able to withstand pull loads that averaged over 200x their own weight. Fortress Anchors are constructed using a high-tensile, corrosion-resistant, aluminum magnesium alloy. This results in a lighter, easy to handle anchor with superior holding power.The anchors have been designed to be easily disassembled for compact storage, or as a spare and/or a storm anchor.  All Fortress Anchors are precision-machined for sharpness and quick penetration into common sea bottoms, which ensures faster setting-performance.Fortress Marine Anchors offers a 100% Hassle-Free Lifetime Parts Replacement Warranty.*Made in the U.S.A.Features: Award Winning Design Highest rating in tests worldwide Hardened high-tech aluminum magnesium alloy Adjustable fluke angles: 32°  for common bottoms, 45° for soft mud Easily disassembled for easy storage Easy to manage weight Tough anodized finish Technical Specifications: Size of Boat - 46' to 51' (14 to 15 M) Style - Fluke Material - Aluminum magnesium alloy Working Load - 3,000lb (1,361kg) Shank Length - 40" (1,016mm) Fluke Length - 24" (610mm) Stock Length - 32" (813mm) Weight - 21lbs (9.5kg) *Sold as an Individual  Specifications: Weight (lbs): 21 Construction: Aluminum Alloy Color: Aluminum Box Dimensions: 5"H x 9"W x 43"L WT: 25.5 lbs UPC: 647124120377 Quick Guide (pdf)Brochure (pdf)

Read more less

FX-11 Anchor - 7lbFor over three decades, the much lighter Fortress Anchor has out-performed substantially heavier steel anchors in holding power tests conducted all around the world.  In the US Navy tests, not only did the Fortress out-perform heavier steel anchors, they were also able to withstand pull loads that averaged over 200x their own weight. Fortress Anchors are constructed using a high-tensile, corrosion-resistant, aluminum magnesium alloy. This results in a lighter, easy to handle anchor with superior holding power.The anchors have been designed to be easily disassembled for compact storage, or as a spare and/or a storm anchor.  All Fortress Anchors are precision-machined for sharpness and quick penetration into common sea bottoms, which ensures faster setting-performance.Fortress Marine Anchors offers a 100% Hassle-Free Lifetime Parts Replacement Warranty.*Made in the U.S.A.Features: Award Winning Design Highest rating in tests worldwide Hardened high-tech aluminum magnesium alloy Adjustable fluke angles: 32°  for common bottoms, 45° for soft mud Easily disassembled for easy storage Easy to manage weight Tough anodized finish Technical Specifications: Size of Boat - 28' to 32' (8 to 10 M) Style - Fluke Material - Aluminum magnesium alloy Working Load - 900lbs (408kg) Shank Length - 27" (686mm) Fluke Length - 16" (406mm) Stock Length - 22" (559mm) Weight - 7lbs (3.2kg) *Sold as an Individual  Specifications: Weight (lbs): 7 Construction: Aluminum Alloy Color: Aluminum Box Dimensions: 3"H x 6"W x 29"L WT: 8 lbs UPC: 647124120117 Quick Guide (pdf)Brochure (pdf)

Read more less

FX-16 - Mud Palm Set - Pair Original replacement mud palms for the FX-16 anchor.FOR RED LOGO ANCHORS ONLY (2006 AND NEWER)Includes mounting hardware.*Sold as a Pair

Read more less

SFX-16 Stowaway Bag for the FX-16 AnchorThe Fortress Stowaway Anchor Bag holds everything you need to deploy your Fortress anchor quickly.  No more searching for wrenches, shackles or chain.  With the Stowaway system, it's "in the bag."The Stowaway bags are built to last in the rugged marine environment.  The bag closure as well as the straps (which serve as convenient carrying handles) are high strength, extra wide Velcro™.  Inside each bag are pouches to hold the correct size wrenches (included) and even a spare fluke clip, bolt and nut (also included). Easy to understand diagrams are sewn into the bag to take you through anchor assembly and bag-packing procedures.*Anchor not included.Features: Custom designed for all Fortress anchors Made from top quality, rugged ballistic Cordura™ Securely holds everything - Anchor, chain, shackles and wrenches In the Box: Stowaway Bag Wrenches x 2 - 7/16" (11mm) Spare Clip/Bolt/Nut *Sold as an Individual

Read more less

Neat Cleat Stainless Steel - 6"A retractable stainless steel cleat with a thin profile that installs easily. Spring loaded stay up design. Each stanchion is a 7/8 in. stainless steel rod. Drainage receptacles (included) capture moisture and send it to the bilge via pitot tubing (not included). Installation is simple even on narrow gunwales - just drill twice with an appropriate size hole saw.Features: Depth: 3-1/8 in. Height: 1-5/8 in. (lowered) Backed by a lifetime warranty against corrosion Size: 6 in. L x 1-1/2 in. W

Read more less

Happy Hooker Mooring Aid - PlasticMakes picking up moorings a snap. This unique product allows the user to easily pass a rope, mooring line, dock line, or cable through an eye-hook, ring, bow eye, mooring buoy from a distance and retrieve it, all in 1 simple motion. Easily fastens to most any type of extension pole with bolt or hose clamp (pole not included).Features: Makes picking up moorings a snap Allows the user to pass a rope, mooring line, dock line, or cable through an eye-hook, ring, bow eye, mooring buoy from a distance Easy to use Easily fastens to most any type of extension pole with bolt or hose clamp

Read more less

QNC CHC Flush Mount Chain CounterQNC CHC is a complete and reliable tool to remotely operate the windlass and check the length of the lowered chain by means of the color graphic display. The panel surface is completely black tempered glass.Features: Automatic descent function Up alarm function Anchor weighing function in case of sensor failure. Windlass management with auto-free fall. Display the lowered chain length in meters, feet, and fathoms. Glass front Extremely thin profile Capacitive keys High brightness 3.5” color graphic display Multilingual user interface Power supply 12/24 Vdc Functioning over a wide range of environmental temperatures Protection rating IP67 CAN bus Communication Interface

Read more less

Non-Reversing Solenoid Unit - 12VQuick T6315 is a non-reversing contactor that is able to operate electric motors for windlasses and capstans. Due to the external connections, this unit is very easy to install. The casing of this unit is IP66 waterproof. This unit is sold complete with the solenoid unit and product sheet.For use with 700, 1000, 1400, 1500, 1700 Watt Motors, 12V.

Read more less

Flip-Up Dock Cleat - 6" - BlackCast from solid marine grade Almag 35 aluminum and powder coated white or burnished using a special process to give a traditional metallic finish. Distinctive and highly functional, they are available in 3 sizes to suit any requirement. Specifications: Construction: Aluminum Alloy Finish: Powder Coat Size: 6" Box Dimensions: 2"H x 5"W x 9"L WT: 1 lbs UPC: 776113260661

Read more less

Fixed Eco - Weld Free Aluminum 3-Step Dock LadderThese durable ladders have been designed to make a minimum carbon footprint. It is manufactured with no welding processes involved. Easily assembled in a few minutes with stainless steel fasteners. Wider steps make for a sure grip and a safe climb. Rail Height: 18-1/2" above the dock Distance to first step: From dock surface, 11" & 11" between steps Steps: Are 2-1/2" deep and 14" wide Capacity: 500lbs (227 kg) Specifications: Construction: Aluminum Alloy Step Count: 3 Step Box Dimensions: 4"H x 23"W x 25"L WT: 11.4 lbs UPC: 776113207307

Read more less

Dock Builders Cleat - Angled Aluminum Rail Cleat - 8"Features: Designed for aluminum framed docks Fits most OEM dock builder style docks with an aluminum extrusion Slides easily into place Angle allows for stronger hold Specifications: Construction: Aluminum Alloy Finish: Silver Size: 8" Box Dimensions: 3"H x 3"W x 8"L WT: 0.8 lbs UPC: 776113242803

Read more less

Description: All Galvanized Cleats use Hexhead BoltsMaterial: Hot Dipped Galvanized Steel Fastener: 5/16" Dimensions: L: 6'' H: 1-1/8'' Specifications: Finish: Galvanized Construction: Galvanized Size: 6" Box Dimensions: 1"H x 2"W x 6"L WT: 0.45 lbs UPC: 725060152017

Read more less

6" Quick Release Bow Mount Bracket - Black - Powder CoatWith a quick pull of the plunger pin and a short twist, the bracket can be removed leaving only the mounting plate for a clean, obstacle-free deck. Includes integrated O-rings eliminating the need for sealant. Available in 3" or 6" rise for safe and easy gunnel clearance. Clear anodized or black powder coat. Mounting hardware included.Features: Available in 3" or 6" rise for safe and easy gunnel clearance Clear anodized or black powder coat Mounting hardware included Quick and easy installation

Read more less

Panoramic Solar Dock LightFeatures: Perfect for docks and decks Automatic on-at-dusk Weatherproof, durable Works 8 hours on a full charge Replaceable, rechargeable battery 4-5 lumens (emitted light)

Read more less

Ultragard™This bumper is manufactured from the same quality PVC as our Dolphin™ boat fenders and offers the ultimate in cushioning of impacts from your boat. Molded in ribs on the interior of the UltraGard™ ensure it is very soft, but durable and will not collapse. The back has a slight radius allowing for easy mounting on pilings as well.35" x 2-1/4" x 5", Each Specifications: Color: White Box Dimensions: 2"H x 5"W x 34"L WT: 4.1 lbs UPC: 776113100806

Read more less

Dock Edge Standard "D" PVC Profile 16ft Roll - WhiteThis versatile and strong profile without a lip can be mounted vertically or horizontally anywhere on the dock face. Great for pilings too. Made of Marine Grade PVC with UV Inhibitors and Fungicide. Packaged in easy to use rolls for fewer joints.Product Specifications: Part No.: 1190-F Description: "D" Profile, (16 Ft/Roll), White WARNING: This product can expose you to chemicals including Titanium dioxide,Vinyl Chloride which are known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov. Specifications: Color: White Box Dimensions: 4"H x 23"W x 23"L WT: 10.6 lbs UPC: 776113119006

Read more less

3-Section Adjustable Boat Hook - Adjusts 38" to 8'Adjusts from 38" to 8' (100 to 240cm) 3 sections: 1", 1-1/8", and 1-1/4" (25, 29, and 32mm) tube dia.The Most Dependable Twist Lock and Strongest Boat Hook EndA tough boat hook is a valuable asset when launching, docking, mooring or retrieving your favorite hat. The threaded end accepts a deck brush, mop, squeegee and other accessories. A highly visible, soft vinyl orange tip covers the threads and protects the boat's finish when fending off. All Team boat hooks float. The hook of unbreakable Lexan® is lighter than (brittle) metal alloy ends. Durability GUARANTEED to last a lifetime. Don't settle for less!Features: Extra Thick Neck and Body for added durability Ribbed Hook and unbreakable Lexan® tougher by design Curved Head for fending off stanchions and lines 3/4" (19mm) Acme Thread accepts brushes, mops, etc Hole Molded in Tip for securing hook or attaching small line for use with tarps or awnings Brochure (pdf)

Read more less

AnchorSnubber20" LongEases the tension on the anchor chain, rode or snubber line. Eliminates chain noise and shock loads to chain, anchor roller, windlass, cleats.

Read more less

RC12/10 12V WindlassThe RC12 fully automatic windlass series is designed to effortlessly retrieve and deploy 10mm (3/8") short link chain and 16mm (5/8") to 20mm (3/4") three strand or 8-Plait rope (RC12-10) and 12mm/13mm (1/2") short link chain and 20mm (3/4") three strand or 8-Plait rope (RC12-12).With a maximum pull of 1590 kg (3500 lb), and an anchor retrieval rate of 15m/min (50ft/min), the RC12-12 is one of the fastest and gruntiest windlasses in its class.A sleek, Low Profile version and a fluted stainless steel capstan drum version, are available.The RC12 is packed with innovative features combined with Maxwell's traditionally classic aesthetics, but reflecting the modern form follows function of the highly successful RC6, RC8 and RC10 series windlasses.The elegantly designed deckplate and chainpipe cover are manufactured in polished marine-grade 316 stainless steel, as are the heavy duty pressure arm, stripper, chainwheel and fluted capstan drum.The huge, through deck hawse pipe throat ensures easy entry of the rope/chain rode into and out of the anchor locker.Double cone-type brake/clutch mechanism permits Free Fall anchoring. Cone clutches, unlike dog clutches, provide smooth progressive engagement, ensuring safe and precise operator control.The RC12 features Maxwell's revolutionary and Wave Design™ chainwheel. Emergency manual retrieval is made simple and easy with Maxwell's unique Active Latch Ratchet System operation that prevents backwind of the windlass during manual hauling of the anchor.The Maxwell-designed and innovative black, hard anodized gearbox provides numerous advantages: - Fast and easy windlass installation - More corrosion resistant - Easy to maintain and service - Takes up less room in the anchor locker - 75:1 Ratio (RC12-10) or 100:1 Ratio (RC12-12), single stage design with less moving parts, for smoother and quieter operation - Allows for multi-positioning of the gearbox/motor.Every Maxwell automatic rope/chain windlass comes complete with all the necessary components for fully automatic dual direction control in a competitively priced package.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Chain - Diameter (Inches): 3/8" Freefall: Yes Rope Diameter (Inches): 3/4" Vertical/Horizontal: Vertical Box Dimensions: 14"H x 18"W x 25"L WT: 80 lbs UPC: 1000000004397 Brochure (pdf)

Read more less

DockLite Solar Dock & Deck LightThe wireless solar DockLite is easy to install. It's durable, weatherproof low profile construction makes it an attractive and functional addition to Docks, Walkways, Decks and Landings. Ideal for illuminating trouble spots on pathways or transition areas such as from dock to shore. With extended duty solar charged batteries the DockLite will last until sunrise. Automatic on-at-dusk.Product Specifications:Description: DockLite, Solar Dock & Deck Light

Read more less

Reversing Solenoid Pack - 24VMaxwell Reversing Solenoid Pack 24V, replaces P19046.

Read more less

Dock Edge Stainless Steel Profile Fasteners 100 pcs. 1"Stainless Steel will prevent unsightly staining caused by rusting or regular steel fasteners. Recommended for use with all Profiles.Robertson driver bit included.Product Specifications: Part No.: 1006-F Description: Mounting Screws & Drivers, SS, (100 Pc/Pk)

Read more less