Pro Series 3.0 Curved Double Row 40" LED Light Bar - Combo Optics - Black HousingThe second largest light bar at Black Oak LED, this giant light is guaranteed to both turn heads and light up the road like it was the middle of the day. Consisting of two rows of ultra-bright Osram 5W white LED bulbs that span a length of 40 inches, this double-row light bar houses a whopping total of 80 separate bulbs in both spot and flood patterns and can produce 44,000+ lumens of blinding LED light. If users are serious about casting a beam, this is the light for them. Black Oak has taken the LED game to the next level. The Pro Series 3.0 features top-of-the-line LED tech, boasting a 20% increase in lumens, making this series of lights one of the brightest on the market.Features: 360° Ceramic Protection against UV, Salt Water & Corrosion 2 Stage Hydrex Seal Lock for IP69 protection and a fully submersible light bar Heavy-duty Dynamax housing for a 4x stronger frame Premium Dupont powder-coating for the highest quality and most resistant finish Combination Flood/Spot light pattern offers a superior lighting pattern Multi-mount brackets made of 9 gauge marine grade Stainless Steel Lens cover made of Lexan with a UV protectant  Activities & Uses:  Off-Roading UTV roof mount Dunes and desert riding Roof Rack Lighting (Gobi) Addictive desert designs bumper lighting Technical Specifications: Total Wattage: 400W Amp. Draw: 17.9 LED Quantity: 80 Weight: 13.8 lbs. Raw Lumens: 52,800 Warranty: Lifetime IP Rating: IP69K     Connection: Deutsch connector Dimensions with Mounting Bracket (Width x Height): 41.4" x 4.125"  In the Box: Light bar Complete wiring harness with fuse, relay, and switch 12 gauge wire Mounting brackets All hardware is ready to install! *Sold as an Individual Specifications: Beam Pattern: Spot-Flood Combo Housing: Black Length (Inches): 40" Voltage - Input Range (Volts): 12v Box Dimensions: 6"H x 8"W x 46"L WT: 15 lbs UPC: 850044517633

Read more less

600W Pure Sine Wave Inverter - 24VPST Series (120 VAC)This high efficiency DC-AC inverter converts 24 Volts DC to 600 Watts of pure sine-wave AC power at 120 Volts, 60 Hz. The unit comes with pin-type battery cable lugs. Features include built-in electronic GFCI, overload protection, low battery alarm / shut down, low idle power draw of less than 0.5 Amps. AC power is available from a NEMA-20R GFCI duplex outlet on the front panel. Safety certified to UL standards.Features: High efficiency Temperature controlled cooling fan – reduces energy consumption Low interference Wide operating DC input range: 21.4 - 33.0 VDC Commercial grade design suitable for heavy duty loads, long periods of continuous operation & for emergency back up UPC – Universal Protection Circuit: low voltage, over voltage, over temperature, over load and short circuit Low idle power draw Dual GFCI protected AC outlets Optional remote control (sold separately): Model RC-15A Comes with pin-type battery cable lugs Safety certified to UL standards, FCC compliant Specifications: Input: 24 VDC Output: 120 VAC Watts: 600 Watts Surge: 1000 Watts Remote Control: RC-15A sold separately Weight: 5.9 (lbs) Weight: 2.7 (kg) Dimensions: 9.37 x 10.87 x 3.23 (in) Dimensions: 238 x 276.2 x 82 (mm) Safety: ETL to UL Standards Warranty: 2 Year Limited Applications: Service vehicles Mobile Offices Boats Recreation Vehicles, Camping Telecommunication Field work / Construction sites Solar power systems Emergency backup power Home electronics: TV, VCR, video games Computers, printers WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Inverter Cont. Output Wattage: 600w Outlet Qty: 2 Duplex GFCI Inverter Input Voltage: 24v Waveform: Pure Sine Wave Box Dimensions: 6"H x 11"W x 14"L WT: 7.2 lbs UPC: 622988072161 Owner's Manual (pdf)Brochure (pdf)

Read more less

Hatch TapeLength: 8'Height: 1/8"Width: 3/4"Color: BlackTACO Metals supplies quality hatch tape that is designed to protect boat interiors and exteriors from the harsh marine environment. Well suited for use in live wells, hatches and other enclosures. TACO hatch tape products are made of specially formulated rubber compounds, designed and engineered to provide maximum sealing capacity and protect against weathering and vibration. Creates a tight, rattle-free seal Adhesive backing for convenient installation Durable, flexible sponge rubber compound This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

Pro Series 3.0 Double Row 6" LED Light Bar - Combo Optics - Black HousingThe 6-inch LED light bar is an extremely popular light that can fit in almost any space users need it. These work so well for many applications where users need a light that they know is going to work when that switch is flipped! This light showcases 5W Osram LEDs with combo optics.This LED light bar double row works extremely well for work lights, hunting lights, outside yard lights, backup lights, and as a waterproof LED light for an ATV, RZR, and boats. If users can mount it and power it, then there should be no problem using it. This 6-inch LED light bar comes with waterproof wiring, mounting, and stainless steel hardware, so users get a complete package ready to install. If, for any reason, users don't love this amazing light, return it risk-free with Black Oak's 30-day money-back guarantee. Black Oak has taken the LED game to the next level. The Pro Series 3.0 features top-of-the-line LED tech, boasting a 20% increase in lumens, making this series of lights one of the brightest on the market.Features: 360° Ceramic Protection against UV, Salt Water & Corrosion 2 Stage Hydrex Seal Lock for IP69 protection and a fully submersible light bar Heavy-duty Dynamax housing for a 4x stronger frame Premium Dupont powder-coating for the highest quality and most resistant finish Combination Flood/Spot light pattern offers a superior lighting pattern Multi-mount brackets made of 9 gauge marine grade Stainless Steel Lens cover made of Lexan with a UV protectant Activities & Uses:  Perfect Jon boat bow light Marine Flood light ATV or UTV brush guard lights Front bumper truck lights Technical Specifications: Total Wattage: 60W Amp. Draw: 2.6 LED Quantity: 12 Weight: 4.4 lbs. Raw Lumens: 7,920 Warranty: Lifetime IP Rating: IP69K     Connection: Deutsch connector Dimensions with Mounting Bracket (Width x Height): 7.4" x 4.125" In the Box: Light bar Complete wiring harness with fuse, relay, and switch 12 gauge wire Mounting brackets All hardware is ready to install! *Sold as an Individual Specifications: Beam Pattern: Spot-Flood Combo Housing: Black Length (Inches): 6" Voltage - Input Range (Volts): 12v Box Dimensions: 4"H x 9"W x 15"L WT: 4.1 lbs UPC: 850044517541

Read more less

Pro Series 3.0 Curved Double Row 30" LED Light Bar - Combo Optics - Black HousingThis 30-inch curved LED is a painfully bright LED bar that won't break the bank. This light is perfect for mounting in a lower bumper, behind the grill, or across the top of an ATV and can throw a beam that will illuminate a whole air strip. Don't underestimate its size. This 30'' curved double-row light bar is no joke.Black Oak has taken the LED game to the next level. The Pro Series 3.0 features top-of-the-line LED tech, boasting a 20% increase in lumens, making this series of lights one of the brightest on the market.Features: 360° Ceramic Protection against UV, Salt Water & Corrosion 2 Stage Hydrex Seal Lock for IP69 protection and a fully submersible light bar Heavy-duty Dynamax housing for a 4x stronger frame Premium Dupont powder-coating for the highest quality and most resistant finish Combination Flood/Spot light pattern offers a superior lighting pattern Multi-mount brackets made of 9 gauge marine grade Stainless Steel Lens cover made of Lexan with a UV protectant Activities & Uses:  Off-Road combo light T-Top boat light Behind the grill light bar UTV roof lighting Perfect between tow hooks on Ram 2500 and 3500's Technical Specifications: Total Wattage: 300W Amp. Draw: 12.7 LED Quantity: 60 Weight: 10.8 lbs. Raw Lumens: 39,600 Warranty: Lifetime IP Rating: IP69K     Connection: Deutsch connector Dimensions with Mounting Bracket (Width x Height): 31.4" x 4.125" In the Box: Light bar Complete wiring harness with fuse, relay, and switch 12 gauge wire Mounting brackets All hardware is ready to install! *Sold as an Individual Specifications: Beam Pattern: Spot-Flood Combo Housing: Black Length (Inches): 30" Voltage - Input Range (Volts): 12v Box Dimensions: 6"H x 7"W x 35"L WT: 12.2 lbs UPC: 850044517718

Read more less

MareLube TEF45 Max PTFE Heavy Load Lubricant - 4 oz.Marelube is Forespar's new family of three specifically formulated synthetic lubricants designed for various uses around your boat. Each contains PTFE and they work equally well in fresh or salt water. Marelube TEF 45 is a highly water-resistant synthetic lubricanat grease containing 45% PTFE. This is the highest percentage PTFE available, which makes TEF 45 perfect for heavy loads and bi-metal anti-corrosion applications like turnbuckles, spar fittings and motor lower units. TEF 45 also works well at protecting against rust corrosion and anti-seize applications. Features: Max PTFE Heavy Load Formulation Highly Water Resistant Bi-metal Corrosion Protection Specifications: Type: Grease Box Dimensions: 3"H x 3"W x 3"L WT: 0.35 lbs UPC: 028026190932

Read more less

White Cloud High Gloss Polymer 2.0 - GallonSmoove’s “easy on, easy off” formula will bond to the surface and produce an extreme shine and long-lasting protection. White Cloud works best on a clean, non-oxidized surface that has been prepped using one of Smoove’s polishes or just after using Smoove's “Bubble Gum." Can be removed by hand or machine.For best results, hand-apply a super-thin layer to the surface up to 15 feet at a time. Let it haze, then buff it off with a clean polish pad. Use either a yellow wool polish pad or a black foam pad.Features:Delivers unmatched durability and shine in harsh environmentsSpecifications:Size: Gallon Specifications: Type: Waxes & Polishes Box Dimensions: 4"H x 7"W x 11"L WT: 8.9 lbs UPC: 704660916229

Read more less

iBrid Nano II Polisher with Battery + Charger 120V 60Hz USA PlugThe iBrid Nano II represents the evolution of RUPES' famous compact polisher, now even more powerful, versatile, and innovative. Featuring the exclusive SMARTFIX quick-release system, it allows easy, fast connection and disconnection of the functional units.Thanks to the gear reduction system, the Nano II can operate in rotary mode up to 2000 RPM even with 50mm backing plates, ensuring consistent torque and superior control.Ideal for precision work in tight spaces and defect removal, it is the perfect tool for polishing professionals who demand flexibility, reliability, and uncompromised performance in every situation.Kit Includes:  iBrid Nano II (9.HR81MLII) 2x Rechargeable power pack (9HB125LT) Charger (9HC120LT) 12mm orbit Functional Unit (58.392/C) Polishing backing pad Ø50mm (2”) (996.001/C) Specifications: Type: Tools & Accessories Box Dimensions: 6"H x 7"W x 15"L WT: 3.95 lbs UPC: 8050246742884

Read more less

Bigfoot HLR75 Mini iBrid Polisher 1-Charger 2-Battery PackThe RUPES BIGFOOT HLR75 iBRID MINI POLISHER represents the evolution of RUPES tools with iBrid dual-power technology. Ideally suited for polishing applications in curves, contours, and compact spaces, the HLR75 iBrid Mini features a 12mm orbit and an Ø75mm (3-inch) backing plate for maneuverability and precise control.The RUPES Patented iBrid Technology concept, first featured on the BigFoot iBrid Nano family of tools, increases process efficiency and optimizes the user experience by giving technicians the option to choose the power platform that best suits the specific situation or application. Use battery power for cordless operation or insert the iBrid Power Adapter and run continuously on corded power. The output and performance of the iBrid Mini are identical regardless of power choice, thanks to a specialized motor platform designed, developed, and manufactured in-house by RUPES.The HLR75 features a revolutionary design for the polishing world, unlike any polishing tool seen before. Ergonomics has been optimized by reimaging polisher design. The BigFoot HLR75 iBrid Mini Polisher is extremely comfortable and easy to use in a variety of grip and hand positions. The unique design provides incredible maneuverability and balance to guarantee precise and efficient polishing results while minimizing operator fatigue.iBRID TECHNOLOGYInnovative iBrid Technology allows the RUPES iBrid family of tools to be configured to run on either battery or corded power. Unlike battery-only tools or corded-only tools, iBrid tools allow the operator to choose their preferred power platform or switch from one power source to another. Performance is identical regardless of power source.DESIGN AND ERGONOMICSIn-depth studies and research in ergonomics have resulted in a reimagined polishing tool form factor. Modern lines and carefully considered hand positions are combined with exceptional technical quality to create a polisher that changes the way we look at tool design and what we expect in terms of user comfort. Creating a high-gloss shine has never felt better.MAXIMUM FLEXIBILITYThe HLR75 is perfect for polishing applications on curved surfaces or compact areas where full-sized polishers are not effective or safe. The small tool dimensions, 12mm orbital stroke, and Ø75mm (3-inch) backing plate allow the iBrid Mini to maximize efficiency and effectiveness of polishing operations, especially on today’s complex modern car designs.ELECTRONIC SPEED CONTROL MODULEThe speed control dial is highly visible and easy to adjust. It allows the operator to select or change the speed of the polisher without interrupting the application process.THROTTLE LEVERDerived from actuator levers commonly seen on pneumatic tools, the ergonomic and rubberized variable speed lever provides precise control and full operator comfort while adding a layer of safety that will deactivate the tool in the event it is dropped or slips from the operator’s grip.BATTERY AND BATTERY CHARGELithium-ion battery cells (18V 2.5Ah) with LED indicators show the charge level with the push of a button. A full charge allows for between 35 and 45 minutes of continuous operating time.The HLR75 iBrid Mini Battery Charger is custom-designed to fit the iBrid Mini’s unique battery pack system. The charging station indicates charge status using integrated LED lights and provides a 100% charge from zero to full in approximately 35 minutes.What's In The Box? HLR75 iBrid Mini (9.HLR75) Battery charger (9HC180LT) 2x Rechargeable power pack (9HB180LT) Specifications: Type: Tools & Accessories Box Dimensions: 3"H x 12"W x 17"L WT: 6.8 lbs UPC: 8059519684432 Quick Guide (pdf)Owner's Manual (pdf)Brochure (pdf)

Read more less

Random Orbital Polisher Bigfoot HLR21 iBrid Tool Plus Charger & 2-BatteriesThe iBrid Rupes BigFoot polishers, a true game-changer in the world of polishing applications. This compact yet powerful tool seamlessly combines cordless and corded capabilities, offering freedom and reliability. Whether you’re a professional or an enthusiast, this polisher elevates your work to a new level. Experience unparalleled performance, ergonomic design, and adaptability like never before. Welcome to the future of surface care with the iBrid Rupes BigFoot polishers.Features: Eccentric set Anti-spinning ring In-runner brushless motor Gear technology Led indicator Li-ion battery 18V Experience the convenience and power of the BigFoot iBrid system. This advanced 18V battery system delivers 5 Ah for extended, uninterrupted operation. With an impressive 40-minute battery life at full power, it’s designed for crucial tasks, offering consistent performance even in demanding conditions, with rapid recharge cycles. Its efficient design optimizes workflow and boosts productivity.The BigFoot iBrid polisher, powered by this high-performance battery, consistently excels in challenging applications. Complementing this system is the dual battery charger, which utilizes cutting-edge battery cell technology for lightning-fast charging. It prioritizes the highest voltage battery, ensuring a fully charged, high-capacity power source is always available.What's In The Box? iBrid HLR21 (9.HLR21)  Dual battery charger (9HC185LT)  2 x Rechargeable power pack (9HB185LT) Specifications: Type: Tools & Accessories Box Dimensions: 8"H x 9"W x 18"L WT: 12.3 lbs UPC: 8050246740064 Owner's Manual (pdf)Brochure (pdf)

Read more less

Bigfoot HLR75 Mini iBrid Polisher Kit BetaThe RUPES BIGFOOT HLR75 iBRID MINI POLISHER represents the evolution of RUPES tools with iBrid dual-power technology. Ideally suited for polishing applications in curves, contours, and compact spaces, the HLR75 iBrid Mini features a 12mm orbit and an Ø75mm (3-inch) backing plate for maneuverability and precise control.The RUPES Patented iBrid Technology concept, first featured on the BigFoot iBrid Nano family of tools, increases process efficiency and optimizes the user experience by giving technicians the option to choose the power platform that best suits the specific situation or application. Use battery power for cordless operation or insert the iBrid Power Adapter and run continuously on corded power. The output and performance of the iBrid Mini are identical regardless of power choice thanks to a specialized motor platform designed, developed, and manufactured in-house by RUPES.The HLR75 features a revolutionary design for the polishing world unlike any polishing tool seen before. Ergonomics have been optimized by reimaging polisher design. The BigFoot HLR75 iBrid Mini Polisher is extremely comfortable and easy to use in a variety of grip and hand positions. The unique design provides incredible maneuverability and balance to guarantee precise and efficient polishing results while minimizing operator fatigue.iBRID TECHNOLOGYInnovative iBrid Technology allows the RUPES iBrid family of tools to be configured to run on either battery or corded power. Unlike battery-only tools or corded-only tools, iBrid tools allow the operator to choose their preferred power platform or switch from one power source to another. Performance is identical regardless of power source.DESIGN AND ERGONOMICSIn-dept studies and research in ergonomics have resulted in a reimagined polishing tool form factor. Modern lines and carefully considered hand positions are combined with exceptional technical quality to create a polisher that changes the way we look at tool design and what we expect in terms of user comfort. Creating a high-gloss shine has never felt better.MAXIMUM FLEXIBILITYThe HLR75 is perfect for polishing applications on curved surfaces or compact areas where full-sized polishers are not effective or safe. The small tool dimensions, 12mm orbital stroke, and Ø75mm (3-inch) backing plate allow the iBrid Mini to maximize efficiency and effectiveness of polishing operations, especially on today’s complex modern car designs.ELECTRONIC SPEED CONTROL MODULEThe speed control dial is highly visible and easy to adjust. It allows the operator to select or change the speed of the polisher without interrupting the application process.THROTTLE LEVERDerived from actuator levers commonly seen on pneumatic tools, the ergonomic and rubberized variable speed lever provides precise control and full operator comfort while adding a layer of safety that will de-activate the tool in the event it is dropped or slips from the operator’s grip.BATTERY AND BATTERY CHARGELithium-ion battery cells (18V 2.5Ah) with LED indicators show the charge level with the push of a button. A full charge allows for between 35 and 45 minutes of continuous operating time.The HLR75 iBrid Mini Battery Charger is custom designed to fit the iBrid Mini’s unique battery pack system. The charging station indicates charge status using integrated LED lights and provides 100% charge from zero to full in approximately 35 minutes. Specifications: Type: Tools & Accessories Box Dimensions: 10"H x 12"W x 16"L WT: 13.4 lbs UPC: 8059519685880 Quick Guide (pdf)Owner's Manual (pdf)Brochure (pdf)

Read more less

Freedom 458 Inverter/ChargerAC Power Inverter with High Surge Capability, 3-Stage ChargerWith filtered modified sine wave output, Freedom inverter/chargers run virtually anything, from electrical equipment to appliances and electronics in your RV. Temperature controlled multistage charging ensures that your batteries are recharged quickly, and automatic shutdown and other safety features protect your expensive deep-cycle batteries from excessive depletion. For inverter/charger control and basic system monitoring, use the Freedom Basic Remote. For advanced battery monitoring and remote control, Freedom 458 systems can be paired with optional Link instrumentation.Product Features MSW AC power inverter with high surge capability Automatic 3-stage battery charger Temperature compensation with equalization stage provides optimal charging of deep cycle batteries Built-in transfer switch automatically transfers between inverter power and incoming AC power Power sharing prevents source AC input circuit breaker from tripping Customized settings can be programmed with the Freedom Basic Remote or Link 1000 panels Includes battery temperature sensor 30 month warranty Protection Features Over voltage and under voltage protection Over-temperature protection Overload protection Short circuit protection Electrical Specifications - Inverter Output power (continuous): 2000W Surge power (AC amps): 50A Output frequency regulation: 60Hz Inverter voltage regulation: 120V +/-5% true RMS Output wave form: Modified sine wave Efficiency (full load): 85% Peak efficiency: 92% No load current draw (idle mode): 0.12A AC output connections: Dual - 20/15 Circuit Breakers AC input connections: Single AC transfer switch: 30A Electrical Specifications - Charger Charge rate: 100A DC AC input voltage range: 90 130 VAC Battery voltage (nominal): 12 VDC Battery voltage range: 10.0 15.5 VDC Low battery cut-out: 10.0 VDC AC input (max. charge mode): 21A AC Bulk charge voltage: 14.3 VDC*** Float charge voltage: 13.4 VDC*** Equalize charge voltage: 16.3 VDC Charge control: 3-stage Battery type settings: Wet / Gel 1 / Gel 2 / AGM Equalization: Yes Temperature sensitive charging: Yes ***Default value varies with battery type and temperatureWARNING: This product can expose you to chemicals including Diisononyl Phthalate (DINP) which is known to the State of California to cause cancer, and Di-isodecyl Phthalate (DIDP) which is known to the State of California to cause reproductive harm. For more information go to P65Warnings.ca.gov.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Outlet Qty: None Charging Banks: 1 Inverter Output Voltage: 120v Inverter Input Voltage: 12v Charger Input - Voltage: 120v Inverter Cont. Output Wattage: 2000w Charger Output Voltage: 12v Charger Output - Amps: 100a Box Dimensions: 13"H x 15"W x 19"L WT: 55.7 lbs UPC: 647912106149 Owner's Manual (pdf)Brochure (pdf)

Read more less

PROwatt SW Sine Wave InverterPURE POWER. TRUE VALUE.The PROwatt SW offers affordable, quality pure sine wave inverter solution for both recreational and commercial applications. PROwatt SW provides the necessary current to startup demanding electrical loads. In addition to dual GFCI AC receptacles, the PROwatt SW Series include an innovative USB connection for providing power to most USB chargeable devices. The PROwatt SW Series offers many safety features not found in similar inverters. When equipped with a remote control, the PROwatt SW Series has the ability to provide automatic ignition lockout shutting down the inverter's output when the vehicle's ignition is not engaged.The compact, easy-to-use and easy-to-install design of the PROwatt SW Series makes it ideal for use in commercial truck, RV and marine applications. With True Sine-Wave output, the PROwatt SW Series can provide power for all types of electrical loads including, variable speed power tools, advanced electrical appliances, microwaves and much more. The PROwatt SW provides household AC power anywhere.Product Features: 50W Continuous, 1200W Surge Capability Built-in digital display for DC volts and output power Built-in USB port Dual GFCI AC receptacles for safe operation Heavy duty terminals for trouble-free battery connection Available ON/OFF remote switch (with ignition lockout) Two year warranty Protection Features: Low voltage shutdown (10.5 Vdc) Low voltage alarm (11.0 Vdc) Over voltage protection (15.5 Vdc) Over load shutdown Over temperature shutdown GFCI protection Electrical Specifications: Continuous Power:540W Surge Capacity (Peak): 1200W DC Input: 12 Vdc (nominal) AC Output Frequency: 60 ± 0.5 Hz AC Output Voltage Range: 104 - 127 Vac USB Output: 5 V / 500 mA Output Waveform: True Sine Wave Optimum Efficiency: 90% No Load Current Draw: < 0.6 A Input Voltage Range: 10.5 - 15.5 Vdc General Specifications: Operating Temperature Range: 32°F - 104°F (0°C - 40°C) AC Receptacle: Dual GFCI USB Receptacle: Single Port (Type A) DC Connection: Hardwire Recommended DC Fuse: 150 A Digital Display: DC voltage, AC output power & error codes Dimensions (H x W x L): 3.5" x 8.7" x 12.2" (89 x 220 x 310mm) Weight: 6.5lb (3.0kg) Warranty: Two year WARNING: This product can expose you to chemicals including Diisononyl Phthalate (DINP) which is known to the State of California to cause cancer, and Di-isodecyl Phthalate (DIDP) which is known to the State of California to cause reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: DC Connection Type: Hardwire GFCI: Yes Outlet Qty: 1 Duplex GFCI Inverter Surge Rating: 1200w Inverter Input Voltage: 12v Waveform: True Sine Wave AC Connection Type: Hardwire Inverter Output Voltage: 120v Inverter Cont. Output Wattage: 540w Box Dimensions: 6"H x 10"W x 15"L WT: 6.8 lbs UPC: 715535894061 Quick Guide (pdf)Owner's Manual (pdf)

Read more less

True North Deluxe 9206 120VAC High-Performance Space Heater - 600W, 900W & 1500W600, 900, and 1500 watt electric space heater. Rugged, steel body construction. Dual overheat protection.This rugged AC electric heater keeps the cabin warm on the chilliest of those early and late season nights in the marina. The model 9206 True North AC heater was recognized by Powerboat Reports as being the best. There is no other heater on the market that delivers the performance and quality of the True North.Features: Steel construction 3 heat settings (600, 900, and 1500 Watt) Option of a 'fan only' setting Built-in thermostat Anti-freeze setting Low profile design Made in Canada 5-year warranty Benefits: Years of trouble-free use Extended boating season Greater on-board comfort Can use for 'no heat' air circulation Eliminate snow or frost build up on boat top Cannot tip over Easy to stow when not in use Owner's Manual (pdf)Brochure (pdf)

Read more less

Random Orbital Polisher Bigfoot LHR21 Mark V (Tool Only)The RUPES BigFoot LHR21 Mark V polisher represents a real breakthrough in the professional polishing industry. This polisher features a 150 mm backing pad and a 21 mm orbit and stands out for a series of technical innovations aimed at improving performance and comfort, offering more precise and efficient polishing.Reduced vibration & silence with POLYSYNTHEC™ gearsA key innovation of the Mark V is the use of POLYSYNTHEC™ composite gears, which offer superior resistance to wear even in the most demanding working conditions. These gears are lighter than traditional metal gears and require less lubrication, thus improving the efficiency of the motor and reducing energy loss. The result is a drastic reduction in vibration and noise, improving comfort during prolonged use. The reduction in vibration is particularly important because it allows the operator to maintain a more stable grip, improving the precision of movements and the quality of the polishing. This also reduces fatigue during long work sessions, ensuring consistent and professional results. The 47% reduction in noise compared to previous models, however, makes the work environment quieter and more pleasant, protecting the operator’s hearing.PrecisionPro backing pads & low centre of gravity for optimal controlThe BigFoot Mark V polishers also introduce the new PrecisionPro backing pads, designed to ensure optimal balance when using different pads. These pads feature a protective rubber edge, which ensures greater safety when polishing delicate surfaces, reducing the risk of accidental damage. This allows the operator to work with greater confidence, even on sensitive surfaces such as edges or particularly delicate bodywork parts. Another notable innovation is the low centre of gravity of the Mark V polishers. Lowered by 13 mm compared to previous models, this allows unparalleled stability and superior control of the tool, especially in complex work situations. With a lower center of gravity, the operator can maneuver the polisher with greater precision, even when working on complex surfaces or intricate details.5-Year WarrantyRUPES doesn’t just offer advanced technological innovations, they demonstrate their confidence in the quality and durability of the Mark V polishers with an extended 5-year warranty. By registering their product immediately after purchase, customers can enjoy comprehensive support that covers any manufacturing defects, providing long-term protection for their investment. This extended warranty not only provides added peace of mind, it also underscores RUPES’ commitment to providing high-quality products that are designed to last. Specifications: Type: Tools & Accessories Box Dimensions: 6"H x 7"W x 22"L WT: 8.2 lbs UPC: 8059519688768 Brochure (pdf)

Read more less

Velcro Waffle Ultra-Fine Polishing Foam Pad for Rotary Polishers 180mm - WhiteThe WAFFLE ULTRA-FINE FOAM PAD is designed to remove fine imperfections and create an unbelievably high gloss finish. The waffle pad face, perfect against the stress caused by rotary motion, offers great stability when correcting paint defects or removing haze left by previous, heavier polishing phases. These pads are designed to work with the BigFoot LH19E and any other rotary polisher. We recommend pairing them with our UNO Pure Compound.The waffle design of the pad surface generates a smooth polishing experience and increases user comfort. Since the waffle-shaped face of these pads does not totally touch the surface, they work at a cooler level, reducing the risk of overheating the paint. Specifications: Type: Buffers & pads Box Dimensions: 1"H x 6"W x 6"L WT: 0.05 lbs UPC: 8059519685064 Quick Guide (pdf)

Read more less

Reveal Lite-Residue Remover - 750mlREVEAL LITE is a surface preparation and cleaning spray specifically formulated to remove compound and polish oils, residues, waxes, non-durable fillers, and other surface contamination remaining on surfaces before or after correction. It also works great as an exterior glass cleaner.Tips for Success: REVEAL LITE, spray generously onto the surface to be cleaned (if the surface is freshly painted, spray onto a towel, then wipe, do not spray directly on the surface). Wipe immediately with a clean, soft, microfiber polishing cloth until dry. Inspect surface and repeat treatment as necessary. Specifications: Type: All Purpose Box Dimensions: 3"H x 3"W x 8"L WT: 1.6 lbs UPC: 8059519685637 Quick Guide (pdf)

Read more less

Dual Battery Charger for iBrid HLR15 & HLR21 Batteries with LED IndicatorsThe 9.HC180LT Battery Charger is custom-designed to fit the iBrid Mini’s unique battery pack system. The charging station indicates charge status using integrated LED lights and provides a 100% charge from zero to full in approximately 35 minutes.*Batteries NOT Included Specifications: Type: Battery & Electrical Box Dimensions: 4"H x 8"W x 9"L WT: 2.6 lbs UPC: 850056581165

Read more less

D-A Precision Pro Polishing Backing Pads 150mm 6"These revolutionary backing pads have been meticulously designed to take your polishing experience to the next level.Without polyurethane, they not only bring durability to the forefront but also provide a lower center of gravity. This means enhanced stability during operation, allowing for greater control and precision in your work.The rubber edge adds an extra layer of finesse to your polishing tasks, ensuring that even the most delicate surfaces are treated with care. What truly sets our backing pads apart is their ability to guarantee better balancing, even with different polishing pads.This means you can effortlessly switch between various pads without compromising on performance or quality.LOWER CENTER OF GRAVITYFor superior stability and controlRUBBER BORDER PROTECTIONFor added surface protection and a smoother glideBALANCING VERSATILITYPerfect balance with various polishing pads Specifications: Type: Buffers & pads Box Dimensions: 1"H x 6"W x 6"L WT: 0.2 lbs

Read more less

Solve - 20oz Aerosol CanSEM Solve is a virgin solvent blend to clean panels before refinish or repair.Features: Effectively removes adhesive residue, wax, grease, road tar, oil, silicone, paint overspray, and bug remnants Easy to use Leaves no residue Applications: Bare metal Primed or painted surfaces SMC and plastic - limit exposure Properties: Available in gallon, aerosol, quart, or 5-gallon containers Clear Ready to use

Read more less

Pro Soft Cooler - 16-Can - MushroomColeman Pro is gear that works hard like you. It is purpose-built for everyday use in the most demanding environments. The Coleman Pro 16-Can Soft Cooler will keep your lunch and drinks cold while you put in the work, and a separate dry storage compartment keeps keys, phones, and more close at hand. Built tough, the durable exterior is puncture-resistant and backed by a 3-year limited warranty. The antimicrobial treatment to the interior helps protect it from odor-causing bacteria, while a compression-molded base protects the soft cooler to help prevent leaks. Throw the Coleman soft cooler over your shoulder to keep your hands free to carry toolboxes. Work smarter, not harder, with oversized zipper pulls for easy access in work gloves and reflective MOLLE webbing for extra storage. *Antimicrobial properties are built into the product to prevent odor-causing bacteria. The product does not protect users or others from disease-causing bacteria. Always clean this product thoroughly after each use.Features: BUILT TOUGH: Coleman Pro stands up on demanding job sites and rugged outdoor environments and never takes a day off STAYS COLD: Designed to keep your lunch and drinks cold throughout the work day DRY STORAGE: Ample space separate from the cooler for storage DURABLE: Puncture resistant, durable, easy-to-clean construction BUILT TO LAST: 3-Year limited warranty ANTIMICROBIAL LINER: Interior antimicrobial treatment to prevent odor, mildew, and mold*** REINFORCED BASE: Compression molded base protects the cooler and prevents leaks SHOULDER STRAP: Keep your hands free OVERSIZE ZIPS: Easy access with work gloves EXTRA STORAGE: Reflective molle webbing on exterior Specifications: Color: Mushroom Capacity: 16 cans Weight (lbs): 1.900 Exterior Height (inches): 12.500 Exterior Length (inches): 11.750 Exterior Width (inches): 9.000 Cooler Wheels: No Cooler Cup Holders: No Warranty: 3-year Specifications: Color: Tan/Black Box Dimensions: 10"H x 11"W x 12"L WT: 2.05 lbs UPC: 076501171914

Read more less

Chiller™ 16-Can Soft-Sided Portable Cooler - BlackMeet the CHILLER™ 16-Can Soft-Sided Portable Cooler. Whether you’re bringing drinks to the game or keeping the fam fueled on a hike, this cooler’s easy and comfortable to carry thanks to its adjustable padded sling strap and side handles. This cooler’s exterior is made from recycled polyester fibers so you’ll help reduce your impact on the environment.Features: Portable: Adjustable padded sling strap and padded side handles for easy transport; zippered front and inside mesh pockets for storing ice packs and other extras Recycled Fabric: Exterior fabric is made from recycled polyester fibers Superior Ice Retention: TempLock™ Insulation keeps food and drinks cold for 12 hours or more Leakproof: Welded seams prevent leaks Easy To Clean: Removable antimicrobial* and stain-resistant hard plastic liner helps prevent odor, mildew, and mold Capacity: Holds up to 16 cans Specifications: Color: Black Weight (lbs): 2.10 Exterior Height (inches): 12.0 Exterior Length (inches): 7.9 Exterior Width (inches): 12.5 Capacity: 16 Cans Cooler Cup Holders: No Cooler Wheels: No *This product does not protect users against food-borne bacteria. Clean thoroughly after each use. Specifications: Color: Black Box Dimensions: 10"H x 11"W x 13"L WT: 1.6 lbs UPC: 076501170696

Read more less

4MP HD-TVI Mini IR Turret with 2.9mm Lens - GreyMonitor your property with the miniature dark-gray aluminum 4MP Outdoor HD-TVI Mini-Turret Camera with Night Vision from Speco Technologies. Featuring a 4MP CMOS sensor and a 2.9mm fixed lens, this camera transmits video at resolutions up to 2560 x 1440 at 15 fps. The camera is equipped with IR LEDs for up to 35' of night vision, enabling you to capture video in even total darkness.Designed for outdoor use, the camera is housed in an IP66-rated weather-resistant enclosure. The UTC (Up-the-Coax) connection allows for OSD control of the camera.Features: Up to 2560 x 1440 resolution video at 15 fps over coax 12 built-in IR LEDs for up to 35' of night vision Signal distance up to 1600' Progressive scanning system Automatic gain control Automatic white balance Internal synchronization Runs on 12 VDC (power supply available separately) Vandal-resistant cast aluminum enclosure IP66 rated for outdoor use FCC and RoHS certified Miniature form factor, suitable for use in vehicles

Read more less

PT-80 Battery ChargerNewmar’s Phase Three Series Battery Chargers employ “Smart” battery charging technology for 12-volt systems aboard marine applications including workboats, military vessels, commercial vessels, and recreational craft. This charger interacts with batteries, providing the optimum three-stage charge process for fast recovery and conditioning, maximizing performance, and extending battery life.A selector switch adjusts output voltage to adapt to gel-cell, flooded lead-acid, or AGM battery types. An optional temperature compensation sensor also adjusts output for ideal voltage based on changes in the batteries’ ambient temperature. This model is housed in a rugged stainless steel case with a durable white powder coat finish, and the internal circuitry is polyurethane coated for maximum corrosion resistance.Features: 12-volt model “Smart” circuitry provides three-stage charging – bulk, absorption, and float Gel-Cell/Flooded Lead-acid/AGM battery type switch selects optimum charge/float voltages Multiple isolated output banks; ammeter indicates total output current. (Except PT-7) The optional sensor adjusts the output voltage based on battery temperature. (Except PT-7) Current limitations prevent damage from overloading Clean well-regulated output can be used as a power supply; can power loads directly without a battery in line Built to last – rugged stainless steel case with a durable white powder coat finish, an optional drip shield, and marinized internal circuitry Protection: Current Limiting, Thermal Protection, Forced Air Cooling, Drip Shield ABS-type approval for battery charging and power supplies Specifications: Input VAC (50-60 Hz.): 90-264 Input Amps @ Full Load: @ 115 VAC: 12, @ 230 VAC: 7 Power Factor: .95@230V or .98@115V Max Output Amps: 80 Output Banks: 3 Battery Capacity (Amp-Hours): 160-800 Operating Temp. Rating Reference: T-7 Case Size Reference: A-5 Case Size (H x W x D): 16.8C x 9.6 x 6.1C inches (42.7C x 24.4 x 15.5C centimeters) *Note with Dripshield installed C add 1” (2.54 cm) to height and .5” (1.27 cm) to depth Weight Lbs./Kg: 15.2/7 Optional Temp. Sensor Model: TCS-12/24                 Remote Panel Model: RP Equalize Option: Yes Output Indicator Reference: M-3 Compliance Reference: CE Temperature Rating References: Temperature: -10 degrees C to +60 degrees C Derate Linearly From 100% @ 50 degrees C to 80% @ 60 degrees C Nominal Output Voltages at Gel/Flooded Switch Settings (without Temperature Compensation): Gel-Cell: 14.0 VDC Charge @ 50% load and 13.6 VDC Float @ .5 amp load Flooded/AGM: 14.2 VDC Charge @ 50% load and 13.4 VDC Float @ .5 amp load Compliance References: CG: USCG CFR 183.410 (Ignition protected) CE: Carries the CE mark ABS: PT Series meet SVR 2009 4-8-3/5.9, Under 90 meters Rules 2006 4-6-4/7.19, and HSNC 2007 4-8-3/5.13 Options: Remote Panel, model RP, for use with all models except PT-7 and PT-40U (LEDs indicate charger output stage. Manual re-initialization of three-stage charge cycle. With 25′ of cable. Panel dimensions: 3″ H x 4.75″ W) Temperature Compensation Sensor, Model TCS 12/24, for use with all models except PT 7 (-5 mV per cell degrees C, 25′ cable (40’cable optional) This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Charger Input - Voltage: 115/230v Charger Output - Amps: 80a Charger Output Voltage: 12v Charging Banks: 3 Portable: No Inverter Input Voltage: 115/230v Inverter Output Voltage: 12v Outlet Qty: Hardwire Box Dimensions: 11"H x 15"W x 20"L WT: 18 lbs Quick Guide (pdf)Owner's Manual (pdf)

Read more less

115-24-10 Power SupplyThis super-rugged DC power supply is ideal for powering 24-volt communication and navigation equipment onboard commercial vessels where reliability is essential. The proven linear circuit design provides pure noise-free output and a long service life.Features: Excellent Regulation and Ripple Spec (output voltage maintained within 1% under all rated line and load conditions) Polyurethane conformal coated PC board and corrosion-resistant heavy-duty aluminum case with integral shock mounts assure survival in hostile environments The heat generated by semi-conductors is extracted and dissipated by large heat sink fins for cool operation Protection: overvoltage, current limit; (set @ 105% of intermittent rating), thermal overload, and input/output fusing Thermally activated cooling fan on “CD” units Specifications: Nominal Input/VAC: 115/230     Maximum Input Current @115: 5.5 Maximum Input Current @230: 2.5 Output Amperage (Intermittent): 10 Output Amperage (Continuous): 4 Weight: 20 lbs. / 9.1 kg Case Size:H x W x D (inch): 5.7” x 4.8” x 16.3”Input Range105-125/210-250 VAC (selectable), 50-60 Hz; Derate to 50% output below 110 and 220 VACOperating TemperatureStandard Units - 0-50 degrees C, Derate linearly from 100% @ 40 degrees C to 50% @ 50 degrees C thermal shutdown @ 85 degrees C case temperatureDuty Cycle: Intermittent: 20 minutes max on time, 20% duty Continuous: 24 hours/day 100% Duty Options: Modify for use as a battery charger The output voltage is adjusted (see Output Voltage for range) Transfer relay for back-up battery in event of power failure (ERC option) Output Voltage: 24.5 VDC (Internally adjustable 21-27.5 VDC) Ripple: 70mV P-P (@ 110-125 / 220-250 VAC input) 1% Line and Load (@ 110-125 / 220-250 VAC input) Mechanical: Powder-coated aluminum heat sink case Front panel terminal block Heavy-duty mounting flange Conformal-coated PC board This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

Vehicle Power CablePower up while you're on the go with this 12 V adapter. It's your in-vehicle charger when you're out on the open road. This cable will charge or power your device anywhere DC power is available.Compatible Devices: nüvi® Series, zūmo® 220 & 350LM dēzl™ 560LM & 560LMT nüLink!® 1695 LIVE eTrex® 10 Geocaching Bundle Delta Upland™ Delta Upland™ Dog Device Delta Upland™ Handheld WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

360-Series 4" LED SAE Fog Beam - White - Set of 2RIGID's SAE-Compliant Lights were developed specifically for dust, fog, and other low-visibility conditions while being legal for use on the street. These long-range high-intensity lights draw very little power and provide up to 50,000 useful hours. RIGID's SAE-Compliant Lights represent the ultimate street-legal lighting solution in low-visibility conditions. Compliant with SAE J583.Features: SAE J583 Compliant Street Legal LED Fog Light White LED Light Removable Bezel for Color Matching Removable Bezel and Side Fairings for OEM Applications 9-36 VDC Operation Flying Leads for Universal Installation High-Grade Alloy Housing and Heatsink Reverse Polarity Protection Over/Under Voltage Protection IP68 Rated - Dust/Water Ingress Pressure Equalizing Vent Integrated Thermal Management System Impact Resistant Polycarbonate Lens Wiring Harness Sold Separately Operating Temp -40 degrees F To +145 degrees F RoHS Compliant Limited Lifetime Warranty Legal For On-Road and Off-Road Use Product Comes With: Two 4 Inch 360-Series PRO SAE White Fog Lights Mounting Hardware Specifications: Size: 4" Weight: 1.30lbs Optics: SAE Watts: 40W Amp Draw: 2.86 Raw Lumens: 3445 Lux @ 10m: 137.33 Beam Distance @ 1 Lux: 117.2 Beam Distance @ .25 Lux: 234.4 Peak Beam Intensity (cd): 13,733 Horizontal Beam Angle: 68.6

Read more less

Water Magnet Microfiber Drying Towel - 22" x 30"Microfiber towels remove excess water and reduce drying time.No car detailing project would be complete without the perfect microfiber towel. Save money and waste with a reusable towel that will gently shine and polish your vehicle while drying off excess water.Meguiar’s Microfiber Water Magnet Drying Towel reduces drying time with less wring-outs by absorbing up to two times the amount of water from traditional terry towels. Different from the typical towel, the waffle design contains more fabric, which allows user to pick up extra amounts of water with a quick swipe. This microfiber towel is the ideal water magnet that leaves a spot-free finish after each use making it easy for anyone to finish their car project with ease.Ways to Use:Vehicles/TrucksThe Meguiar’s Microfiber Water Magnet Drying Towel is great for use on any vehicle or truck during a routine car wash. Simply start with your basic two bucket wash ensuring that your vehicle is rid of everyday dirt and grime. Finish off the wash with this reusable towel to leave behind spot-free finish.Recreational VehiclesThe Meguiar’s Microfiber Water Magnet Drying Towel can also be used on recreational vehicles. Whether cleaning up your RV for a road trip or sprucing it up along the way, the microfiber towel comes in handy. This reusable towel can easily remove water from windows to help bring more visibility during a commute or wipe off extra road grime keeping your RV in tip-top shape.BoatsKeep your boat rust-free with the Meguiar’s Microfiber Water Magnet Drying Towel. The reusable towel can be easily packed during days out in the ocean to help clean any spills, splatters or unwanted liquids in or around your boat. The microfiber towels are also a great aid during the off-season to help keep a swirl-free and polished finish on the exterior of your boat.MotorcyclesUnpredictable weather can get you suddenly caught in a rain storm! With the Meguiar’s Microfiber Water Magnet Drying Towel you can wipe excess water off your bike preventing any slick surfaces while you cruise on the open roads. The reusable towel can be easily folded and packed in any bag as you head off for a day of adventure.Features: REDUCED DRYING TIME: This means less wring-outs and better absorbency BEST IN CLASS: Absorbs up to two times the water of traditional terry towels NO STREAKS: Leaves a spot-free finish without streaking REUSABLE: High-quality means you can use again and again (machine washable) Specifications: Type: Tools & Accessories Box Dimensions: 2"H x 4"W x 11"L WT: 0.4 lbs UPC: 070382820008

Read more less

Freedom SW Xanbus System Control Panel (SCP)809-0921Specifically designed to operate with the NEW Generation Freedom SW Inverter/Chargers (part# 815-2012 & 815-3012). Product DescriptionUse the System Control Panel for quick and comprehensive control of the Freedom SW Inverter/Charger.The Xanbus System Control Panel (SCP) features a graphical, backlit LCD screen that displays system configuration and diagnostic information in one central location. Large keypad buttons, an intuitive onscreen menu system, and plain text status messages make it easy to configure and operate. By providing basic controls for other devices connected to the network, the SCP reduces the complexity of separate control panels for each device.The SCP is Xanbus Enabled and easily connects to Freedom SW Inverter/Charger and other devices with off-the-shelf network cables, making installation quick and easy. Built-in flash memory makes the SCP's software upgradeable to take advantage of new features and system enhancements.Product Features Graphical 128x64 pixel LCD display Large, tactile keys Meets UL458 regulatory standards Control and display of multiple networked devices Xanbus Enabled WARNING: This product can expose you to chemicals including Diisononyl Phthalate (DINP) which is known to the State of California to cause cancer, and Di-isodecyl Phthalate (DIDP) which is known to the State of California to cause reproductive harm. For more information go to P65Warnings.ca.gov. Quick Guide (pdf)Owner's Manual (pdf)

Read more less

ShieldPro UV Crème Wax - 32ozMalco Marine ShieldPro UV Crème Wax provides long-lasting shine and UV protection on fiberglass, gelcoat, and painted marine finishes in one easy step. Advanced technology polishing agents and waxes, combined with amino-functional silicones, dual-functional UV absorbers, silicone resin, and polymers, create unbeatable gloss and exceptional protection against salt, corrosion, and the sun’s ultraviolet rays.Features: Versatile formula: Protects gel coat, fiberglass, and painted surfaces Long-lasting shine: Lasts up to 6 months with UV protection Long-term protection: Protects against salt, oxidation, and the sun's UV rays Easy to use: Can be applied by hand or using a DA machine or buffer Specifications: Type: Waxes & Polishes Box Dimensions: 3"H x 3"W x 10"L WT: 2.3 lbs UPC: 075929999179 Quick Guide (pdf)

Read more less

850 Metal Wax - Medium Cut Polish - 64oz Brings faded, rusted, and tarnished metal accessories and fittings back to life. This rejuvenating polish saves both time and money by combining restorative and protective properties in one step. Safely removes stubborn discoloration, mild rust, oxidation, and blemishes. Wipes off to reveal high luster shine and coating that guards against future rust, stains, and weathering.Features: Restores and protects bare metals For weathered metal that is lightly rusted, stained, or discolored  Provides 2-3 months of weather protection   Applications: Use of No. 850 should also be avoided on painted metals as well as anodized aluminum Average spread/coverage: 200-400 sq. ft. (for the 16oz version) *Sold as an individual Specifications: Type: Restoration & Compounds Box Dimensions: 4"H x 5"W x 10"L WT: 4.6 lbs UPC: 638234008518

Read more less

476s Super DoubleCoat Auto Paste Wax - 18ozA Mr. Collins original, this classic carnauba/polymer blend is also Collinite’s most durable. Holds up month after month against harmful outdoor corrosives; UV, rain, snow, salt, dust, dirt, grime, bugs, staining, and more. Ideal as a winter wax when both lasting shine and all-season/all-conditions protection are equally crucial.Features: Provides high gloss shine The highest degree of durability, with 7-10 months of weather protection Applications: For hand & dual action, buffers use 476s contains the highest concentration of polymer protection to withstand the harshest elements for the longest period of time. For this reason, we recommend 476s as a protective coating prior to the winter months. While 476s is a traditional hard paste, it can be easily applied and removed. We recommend applying a thin layer to a small section (2 x 2 feet), and removing the wax once it comes to a haze. Typically, this takes anywhere from 1-3 minutes. *Sold as an individual Specifications: Type: Waxes & Polishes Box Dimensions: 4"H x 4"W x 4"L WT: 1.3 lbs

Read more less

1500W Pure Sine Wave Inverter - 12VPST Series (120 VAC)This high efficiency DC-AC inverter converts 12 Volts DC to 1500 Watts of pure sine-wave AC power at 120 Volts, 60 Hz. The unit comes with pin-type battery cable lugs or can be hard-wired. Features include overload protection, low battery alarm / shut down, low idle power draw of less than 1 Amp. AC power is available from a NEMA-20R GFCI duplex outlet on the front panel. Safety certified to UL standards.Features: High efficiency Can be hard wired Temperature controlled cooling fan – reduces energy consumption Low interference Wide operating DC input range: 10.7 - 16.5 VDC Commercial grade design suitable for heavy duty loads, long periods of continuous operation & for emergency back up UPC – Universal Protection Circuit: low voltage, over voltage, over temperature, over load and short circuit Low idle power draw Dual GFCI protected AC outlets Optional remote control (sold separately): Model RC-200 Safety certified to UL standards, FCC compliant Specifications: Input: 12 VDC Output: 120 VAC Watts: 1500 Surge: 3000 Watts Remote Control: RC-200 sold separately Weight: 15.6 (lbs) Weight: 7.1 (kg) Dimensions: 10.35 x 18.43 x 4.16 (in) Dimensions: 263 x 468.2 x 105.6 (mm) Safety: ETL to UL Standard Warranty: 2 Year Limited Applications: Service vehicles Mobile Offices Boats Recreation Vehicles, Camping Telecommunication Field work / Construction sites Solar power systems Emergency backup power Home electronics: TV, VCR, video games Computers, printers WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Inverter Cont. Output Wattage: 1500w Outlet Qty: 2 Duplex GFCI Inverter Input Voltage: 12v Waveform: Pure Sine Wave Box Dimensions: 6"H x 12"W x 21"L WT: 17 lbs UPC: 622988072192 Owner's Manual (pdf)Brochure (pdf)

Read more less

On/Off Remote Control PanelXantrex On/Off Remote Control Panel is made specifically for Xantrex Freedom SW2012 and SW3012.Features: The Freedom Remote Panel (remote panel) can be connected to the Freedom SW Inverter via the Remote port on the AC/DC side panel to turn the Freedom SW Inverter ON or OFF from a more convenient location The remote panel also has the ability to enable/disable the Ignition Lockout feature of the Freedom SW Inverter When this feature is enabled, the Freedom SW Inverter will shutdown if the vehicle's ignition is not engaged (not in ACC position) to prevent unnecessary battery drain Includes a 25 foot (7.6-m) communications cable Choose a location that is dry, free from corrosive or explosive fumes, and appropriate for installing an electronic device WARNING: This product can expose you to chemicals including Diisononyl Phthalate (DINP) which is known to the State of California to cause cancer, and Di-isodecyl Phthalate (DIDP) which is known to the State of California to cause reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

30" Single Row LED Light Bar - Combo Optics - Black Housing - Pro Series 3.0The 30-inch single-row LED light bar is the perfect addition to any vehicle. With its slim, low-profile design, users can easily piss off friends while they try to figure out why the light bar is half the size but double, maybe even TRIPLE, the brightness! The stealth light bar has an impressive Osram 5W Osram LED.With the housing standing at a mere 1.8 inches tall, this stealth light bar fits almost anywhere. Making it easy to mount behind a grill, above a roll cage, headache rack, and lower bumper! Want to know the best part? All this is backed by a hassle-free 30-day money-back guarantee and a limited lifetime warranty! Black Oak has taken the LED game to the next level. The Pro Series 3.0 features top-of-the-line LED tech, boasting a 20% increase in lumens, making this series of lights one of the brightest on the market.Features: 360° Ceramic Protection against UV, Salt Water & Corrosion 2 Stage Hydrex Seal Lock for IP69 protection and a fully submersible light bar Heavy-duty Dynamax housing for a 4x stronger frame Combination Flood/Spot light pattern offers a superior lighting pattern Activities & Uses:  Off-Road combo light T-Top boat light Tacoma lower bumper light bar UTV roof lighting Chevy Colorado bumper light Technical Specifications: Total Wattage: 150W Amp. Draw: 10.3 LED Quantity: 30 Weight: 8.6 lbs. Raw Lumens: 19,800 Warranty: Lifetime IP Rating: IP69K     Dimensions with Mounting Bracket (Width x Height): 33" x 2.6" In the Box: 30” light bar Complete wiring harness with fuse, relay, and switch Mounting brackets All hardware, ready to install! *Sold as an Individual Specifications: Beam Pattern: Spot-Flood Combo Housing: Black Length (Inches): 30" Voltage - Input Range (Volts): 12v Box Dimensions: 6"H x 6"W x 35"L WT: 8.75 lbs UPC: 850044517190

Read more less

BCD996P2 Powerful Digital Base/Mobile ScannerStay safe and informed with the Uniden BCD996P2. A true scanner powerhouse, it comes with state-of-the-art NOAA weather access and S.A.M.E. weather alerts that warn you of severe conditions in your area. This mobile scanner radio comes with 25,000 channels, Close Call RF Capture, TrunkTracker V technology, and more. Enjoy location-based scanning and location alerts by connecting the BCD996P2 to a compatible GPS receiver so you can stay informed when you’re mobile.Features: Close Call RF Technology with DND - provides information about nearby radio transmissions. Close Call Do-Not-Disturb checks for Close Call activity during channel reception, so active channels are not interrupted. TrunkTracker V Operation - Scans APCO 25 Phase 1 and Phase 2, X2-TDMA, Motorola, EDACS, and LTR trunked systems, as well as conventional analog and P25 digital channels. S.A.M.E. Weather Alert - Stay ahead of the weather and on top of the waves. During a NOAA Weather or Emergency Alert, a code for your specific location will alert you to severe conditions in your immediate area. Location-Based Scanning - Connect this scanner to a compatible GPS receiver, and it will automatically select programmed systems based on your exact location. You'll save time by scanning only the local signals. What's In The Box? BCD996P2 Radio Scanner AC Power Adapter DC Wiring Harness Antenna USB Cable WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

MaxComplete Compound - 1 GallonMalco Marine MaxComplete next-generation cutting compound provides aggressive cutting action for heavy scratch removal and produces a gloss final finish.  This water-based, easy-to-cleanup, emulsion formula is designed to remove P600 and finer sand scratches and light-heavy oxidation on fiberglass, gel coat, and selected painted surfaces in marine and industrial applications.Features: Versatile Formula: Can be used on Gelcoat, fiberglass, painted surfaces, and industrial applications Water-based formula:   Environmentally friendly for use in Marinas, safe to use, easy clean-up Aggressive formula: Removes fine sand scratches and oxidation Specifications: Type: Restoration & Compounds Box Dimensions: 4"H x 7"W x 12"L WT: 10.8 lbs UPC: 075929730017 Quick Guide (pdf)

Read more less

Deck & Surface Spray All Purpose Cleaner - 1 GallonMalco Marine Deck and Surface All Purpose Cleaner is a powerful cleaner and degreaser, designed for flat and non-skid surfaces. This highly concentrated, non-caustic, and aluminum-safe cleaner removes dirt, grease stains, and streaks from fiberglass, metal, aluminum, wrapped, and painted surfaces.Features: Versatile formula: Cleans hulls and decks, non-skid and flat surfaces, fiberglass, metal, and painted surfaces Can be used on aluminum Highly concentrated; Dilutable: Clean heavy concentrations of dirt, bilge, grease, and oil at a 1:1 ratio; for general cleaning, dilute at a 1:3 ratio Can also be used at full strength through a trigger sprayer, as needed Phosphate-free and biodegradable: Environmentally friendly and can be used in marinas Specifications: Type: All Purpose Box Dimensions: 4"H x 7"W x 12"L WT: 9 lbs UPC: 075929760014 Quick Guide (pdf)

Read more less

MaxFinishing Polish - 1 GallonMalco Marine MaxFinishing Polish is an advanced all-in-one polish and swirl remover. It can be used on gel coat, fiberglass, and select painted surfaces. MaxFinishing Polish creates a rich, deep gloss and swirl-free finish in a single step after compounding.Features: All-in-one polish: Leaves a rich, deep gloss and a swirl-free finish. Versatile Formula: Can be used on gel coat, fiberglass, and painted surfaces Water-based formula: Environmentally friendly for use in Marinas, safe to use, easy clean-up Specifications: Type: Waxes & Polishes Box Dimensions: 4"H x 7"W x 12"L WT: 9.1 lbs UPC: 075929735012 Quick Guide (pdf)

Read more less

HydroProtek Ceramic Spray - 1 GallonMalco Marine HydroProtek is a SiO2 Ceramic spray-on formula designed to shine, protect, and beautify your watercraft or recreational vehicle. HydroProtek is long-lasting, absorbs UV rays, adds gloss, and easily sheds water. HydroProtek should be used every few months. This formula is safe for all surfaces, including hull, windows, trailers, wheels, and trim. This ceramic spray will bond with gel coat and clear coat to create a durable, hydrophobic surface, prolonging the life and ease of cleaning for any watercraft. Features: Durability: Up to 6 months of protection Hydrophobic properties: Ease of cleaning, water and dirt slide right off Safe on multiple surfaces: Eliminate redundant products, can be used on the hull, windows, trailers, wheels, and trim, leaving outstanding depth-of-gloss. Easy to apply: Spray-on formula simplifies application for experts and novices alike Specifications: Type: Ceramic Coating Box Dimensions: 4"H x 7"W x 12"L WT: 8.75 lbs UPC: 075929999261 Quick Guide (pdf)

Read more less

MaxComplete Compound - 32ozMalco Marine MaxComplete next-generation cutting compound provides aggressive cutting action for heavy scratch removal and produces a gloss final finish.  This water-based, easy-to-cleanup, emulsion formula is designed to remove P600 and finer sand scratches and light-heavy oxidation on fiberglass, gel coat, and selected painted surfaces in marine and industrial applications.Features: Versatile Formula: Can be used on Gelcoat, fiberglass, painted surfaces, and industrial applications Water-based formula: Environmentally friendly for use in Marinas, safe to use, easy clean-up Aggressive formula: Removes fine sand scratches and oxidation Specifications: Type: Restoration & Compounds Box Dimensions: 3"H x 3"W x 10"L WT: 2.75 lbs UPC: 075929730321 Quick Guide (pdf)

Read more less

Gel Coat Compound - 32ozMalco Marine Gel Coat is the perfect compound for marine and industrial applications. Gel Coat Compound is VOC-compliant and a water-based product. This easy-to-use and easy-to-clean-up formula significantly reduces manufacturing and buffing time. It removes P1000 or finer sand scratches and medium to light oxidation. Gel Coat Compound quickly leaves a deep, high gloss finish without the use of waxes, silicones, or fillers.   Features: Fast cutting: Removes P1000 or finer sand scratches and medium to light oxidation on gel coat surfaces Increased productivity: Easy to use, quick cleanup, and leaves a high gloss finish Water-based formula: Environmentally friendly, easy to use Specifications: Type: Restoration & Compounds Box Dimensions: 3"H x 3"W x 10"L WT: 2.75 lbs UPC: 075929998288 Quick Guide (pdf)

Read more less

Super Cut Compound - 32ozMalco Marine Super Cut Compound is an ultra-aggressive compound designed to remove P800 and finer dual-action or wet-sand scratches and medium to light oxidation from gel coat, fiberglass, and select painted surfaces.Features: Versatile formula: Safe for gelcoat, fiberglass, and painted surfaces Ultra aggressive compound: Removes P800 and finer dual action or wet sand scratches and light to medium oxidation Water-based formula: Environmentally friendly, easy to use Specifications: Type: Restoration & Compounds Box Dimensions: 3"H x 3"W x 10"L WT: 2.85 lbs UPC: 075929998301 Quick Guide (pdf)

Read more less

115-12-8 Power SupplyThis super-rugged DC power supply is ideal for powering 12-volt communication and navigation equipment onboard commercial vessels where reliability is essential. The proven linear circuit design provides pure noise-free output and a long service life.Features: Excellent Regulation and Ripple Spec (output voltage maintained within 1% under all rated line and load conditions) Polyurethane conformal coated PC board and corrosion-resistant heavy-duty aluminum case with integral shock mounts assure survival in hostile environments The heat generated by semi-conductors is extracted and dissipated by large heat sink fins for cool operation Protection: overvoltage, current limit; (set @ 105% of intermittent rating), thermal overload, and input/output fusing Thermally activated cooling fan on “CD” units Specifications: Nominal Input/VAC: 115/230     Maximum Input Current @115: 2.5 Maximum Input Current @230: 1.5 Output Amperage (Intermittent): 8 Output Amperage (Continuous): 5 Weight: 32 lbs. / 14.6 kg Case Size:H x W x D (inch): 6.0” x 4.6” x 8.5”Input Range105-125/210-250 VAC (selectable), 50-60 Hz; Derate to 50% output below 110 and 220 VACOperating TemperatureStandard Units - 0-50 degrees C, Derate linearly from 100% @ 40 degrees C to 50% @ 50 degrees C thermal shutdown @ 85 degrees C case temperatureDuty Cycle: Intermittent: 20 minutes max on time, 20% duty Continuous: 24 hours/day 100% Duty Options: Modify for use as a battery charger The output voltage is adjusted (see Output Voltage for range) Transfer relay for back-up battery in event of power failure (ERC option) Output Voltage: 13.6 VDC (internally adjustable 12.6-14.5 VDC) Ripple: 40mV P-P (@ 110-125 / 220-250 VAC input) 1% Line and Load (@ 110-125 / 220-250 VAC input) Mechanical: Powder-coated aluminum heat sink case Front panel terminal block Heavy-duty mounting flange Conformal-coated PC board This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

Battery Maintenance ChargerFully-automatic on-board charger provides a 1.5 Amp maintenance charge. Designed to maintain 12V batteries. Water resistant with safety features like short circuit connection and reverse polarity protection. LED status indicators 1.5 amp 12V 1 bank operation WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Charger Output Voltage: 12v AFD: No Charging Banks: 1 Lockable: No Portable: Yes Charger Input - Voltage: 120v Box Dimensions: 5"H x 5"W x 8"L WT: 1.7 lbs UPC: 022697119001

Read more less

10" Single Row LED Light Bar - Combo Optics - Black Housing - Pro Series 3.0Thin, sleek, and stealthy, the single-row series 10-inch single-row light bar packs an enormous amount of power into a single row of intense LED light! Using the best-performing LEDs on the market, this thin LED light bar will quickly become a light user can not live without. With its IP69K rating (the highest rating possible), this light will last through the most intense conditions. Black Oak has taken the LED game to the next level. The Pro Series 3.0 features top-of-the-line LED tech, boasting a 20% increase in lumens, making this series of lights one of the brightest on the market.Features: 360° Ceramic Protection against UV, Salt Water & Corrosion 2 Stage Hydrex Seal Lock for IP69 protection and a fully submersible light bar Heavy-duty Dynamax housing for a 4x stronger frame Combination Flood/Spot light pattern offers a superior lighting pattern Activities & Uses:  Perfect duck boat bow light Spotlight ATV or UTV bumper lights Front bumper truck lights Technical Specifications: Total Wattage: 50W Amp. Draw: 3.3 LED Quantity: 10 Weight: 4.2 lbs. Raw Lumens: 6,600 Warranty: Lifetime IP Rating: IP69K     Dimensions with Mounting Bracket (Width x Height): 13" x 2.6" In the Box: 10” light bar Complete wiring harness with fuse, relay, and switch Mounting brackets All hardware is ready to install *Sold as an Individual Specifications: Beam Pattern: Spot-Flood Combo Housing: Black Length (Inches): 10" Voltage - Input Range (Volts): 12v Box Dimensions: 4"H x 8"W x 16"L WT: 4.25 lbs UPC: 850079763074

Read more less

Express Touch-Up KitAfter going through an automatic car wash or washing your car at home, there's always a spot that’s missed, drips that run down the paint, or even water spots. Meguiar’s put together the Drive-Thru Car Wash Express Touch-Up kit with the perfect, hand-selected product to put those final touches on your ride after washing. Touch up paint and exterior surfaces with Ultimate Quik Detailer. This premium spray detailer makes quick work of any water streaks and light grime spots that the automatic car wash leaves behind. Plus, it strengthens wax protection and enhances slickness and shine. Quik Interior Detailer is the perfect go-to for cleaning and protecting a variety of interior surfaces, including vinyl, leather, plastic, rubber, metal, and even navigation and touch screens. Clean, protect, and restore the original appearance of these surfaces without a greasy look or feel. Perfect Clarity Glass Cleaner is a professional strength formula that quickly delivers streak-free perfect clarity. This anti-hazing formula easily removes dirt, bugs, tree sap, and bird droppings for lasting clarity. This unique formula spreads and wipes off quickly, with a superior cleaning ability to tackle even the dirtiest glass. Hot Shine Tire Foam lets you clean, shine, and protect tires in one easy step. Thick, active foam clings to tires, dissolving away build-up and leaving behind clean, shiny black tires. Hot Shine is a premium tire shine that cleans and shines your tires without water – just spray and walk away. Conditioner and UV protection to help keep tires looking like new. Also, included in this car cleaning kit as an additional bonus is a premium microfiber towel. To get the best results, consider using a different microfiber towel with each product.Features: CAR CLEANING KIT: Put the final touches on your ride after running through an automatic car wash DETAILER SPRAY: Ultimate Quik Detailer lifts water spots, streaks, or grime left behind after a wash STREAK-FREE CLEANING: Our premium glass cleaner quickly cleans glass and mirrors and is anti-hazing HIGH GLOSS TIRE SHINE: Our tire dressing lightly cleans, leaves a lasting high gloss & UV protection INTERIOR DETAILER: Our interior detailer cleans, restores, & protects a variety of interior surfaces Specifications: Type: misc Box Dimensions: 6"H x 9"W x 12"L WT: 6.7 lbs UPC: 070382018139

Read more less

LED Battery TesterSpecifically for all 12 Volt DC batteries.

Read more less