Yanmar Pulley Kit for 4JH, 4JHE, -TE, -HTE, -DTEAltMount® Serpentine Pulley Conversion Kit for Yanmar Diesel EnginesYanmar Engines Covered: 4JH, 4JHE, -TE, -HTE, -DTEKit Includes:  Three Ten-Groove (J10) Pulleys Two J10 47″ Circumference Serpentine Belts (one spare) Mounting Hardware Note: If you specify an AT-200A Alternator, a longer belt length may be required.  Call Balmar Technical Support @ +1 (360) 435-6100 x3This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

Pulley Kit, Yanmar 4JH4-HTE-TE-DTEThe AltMount® Serpentine Pulley Conversion Kit provides an easily installed solution to provide greater load transfer and reduce engine noise and vibration. While the installation process for this kit is moderately simple, Balmar strongly recommends reading and following the installation instructions closely when installing the kit—this AltMount® Serpentine Pulley Conversion Kit for Yanmar diesel engines.Yanmar Engines Covered: 4JH4-HTE-TE, -DTEKit Includes:  Three Ten-Groove (J10) Pulleys Two J10 46″ circumference serpentine belts (one spare) and mounting hardware Note: If users specify an AT-200A Alternator, a longer belt length may be required. Call Balmar Technical Support @ +1 (360) 435-6100 x3This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Owner's Manual (pdf)

Read more less

Alternator 170 Amp, 12V Single Foot Internal Regulator K6 PulleyAlternator, XT Series, 170A, 12V, Spindle Mount (Single Foot), 1-2in, K6 Serpentine Pulley, Case Ground1″ Motorola-Style Mounting;  Typical for Westerbeke, Lehman, Hino & Pathfinder Engines2″ Delco-Style Mounting;  Typical for Volvo Penta (Gas & Diesel), John Deere, Perkins, Mercruiser, Pleasurecraft, Crusader, Indmar, Marine Power & other GM-based EnginesThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Voltage: 12v Amperage: 170A Box Dimensions: 9"H x 9"W x 10"L WT: 14.3 lbs UPC: 676205501996 Brochure (pdf)

Read more less

Max Charge MC-618 Regulator 12V with Harness Multi-StageThe MC-618-H premium 12-volt multi-stage voltage regulator provides the ultimate in charging safety and control. Includes wiring harness. Features: Intelligent multi-stage regulation. Digital numeric LED display. Epoxy-encapsulated circuitry. For use with 12 volt systems Wiring harness included Can be used to drive twin alternator installations. For use with P-type externally regulated alternators Dash lamp and auxiliary lamp terminals Small engine mode Magnetic programming tool included LiFePo4 (lithium) program Optional alternator and battery temperature sensors sold separately This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

SG210 Battery Monitor Kit with Display Shunt GatewayFeatures: Learns and displays all critical battery parameters Supports for all common battery chemistries and voltages Intelligent, self-calibrating accuracy Large, bright, color display Expandable architecture Includes Display Shunt Gateway This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

ARS Multi-Stage Regulator w/Harness - 12VHigh output alternators are an important part of your system for battery care, but they are definitely not the only part.  Without proper voltage regulation, battery charging can be a slow process, or even worse, an ideal recipe for early battery failure.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

SG200 Battery Monitor Kit with Display Shunt & 10M Cable - 12-48 VDCBalmar’s Expandable, Next Generation Monitor.Features:Learns & Displays All Critical Battery Parameters   State of Charge (SoC%) State of Health (SoH%) Charge/Discharge Current Flow Time Remaining History, Faults & Alerts Support for All Common Battery Chemistries & Voltages Including Lead Acid, Lithium (LiFePO4), Standard AGM, TPPL AGM, Carbon Foam AGM, and GEL Batteries  Supports 12V-48V Battery Banks Typically 97% Accurate within 2 Cycles Auto-Calibrating Does not Lose Accuracy with Age  Large, Bright Color Display Sunlight Readable, Configurable & Dimmable 60 Degree Viewing Angle Fits in Standard 2 1/16″ Gauge Socket Expandable Architecture Support Multiple Displays (Optional) Supports Multiple Battery Banks  (Optional) Standard Support for 2 Start Batteries (Voltage Only) Simple, easy-to-install Point-to-Point Network Optional Smartphone/Bluetooth® Gateway Free iOS and Android Apps (Requires Bluetooth® Gateway PN SG2-0300) View All Parameters on your Phone Download Product Updates Balmar has combined recent technology advances to introduce a next generation battery monitor. The SG200 is quite simply the most accurate battery monitor available today. Balmar has combined the best features of its 1st generation Smartgauge™ with many advantages of a shunt-based amp-hour counting system. Further, we’ve designed a device architecture which facilitates multiple gauges or multiple shunts to be added to the network-allowing the boater to monitor multiple energy storage banks simultaneously from multiple locations.In addition, the SG200 Color Display is easy to read, configurable and fits any standard 2 1/16″ gauge socket. Now you can determine your battery(s) condition from anywhere on the vessel or vehicle with multiple displays, or simply add the optional Bluetooth® Smartphone App to keep information in your pocket!This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Quick Guide (pdf)Owner's Manual (pdf)

Read more less

Digital Duo Charge - 12/24VThe Digital Duo Charge (DDC-12/24) provides a “hands off” solution for charging two battery banks without the use of problematic isolators or manual battery switches. During charging the DDC-12/24 monitors voltage at the house battery. When voltage exceeds the set minimum (typically 13.2V in a 12V system and 26.4V in a 24V system) the DDC-12/24 automatically engages, providing up to 30A charge current to the starting battery. When no charge source is present, the DDC-12/24 separates the batteries so the starting battery won’t be accidentally discharged into the house battery. An optional solenoid control enables higher start battery charging output when required.Features: Multi Bank Charging The DDC is a Solid-State Battery Combiner Control Voltage and Current between House and Start Batteries Eliminates the Need for an Isolator, Relay or Manually Operated Battery Switch Used in Concert with Max Charge or ARS-5 Regulators Can also be Employed without a Balmar Regulator Works in Both 12V and 24V Applications House and Start Batteries can be different technologies Start Battery Temperature Sensing Available with the MC-TS-B Sensor Cable 4 Battery Programs Supported for the Start Battery: Standard Flooded, Deep Cycle Flooded, AGM and Gel Cell This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Owner's Manual (pdf)

Read more less

SmartShunt N2K 350AMP 12-48VDC for SG200 DisplayAdd a SmartShunt for Additional Bank and N2k Connectivity: Includes SmartShunt and N2k Adapter. Does NOT include SmartLink Cable*Works with the SG200 display and or Bluetooth Gateway sold separately. One is needed for Programming.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

Offshore Repair Kit AT Series 200AMP 12V Includes Bearings, Brushes, RectifierOffshore Repair Kit, AT Series Alternators, 12V, 200AIncludes: Bearings, Brushes, RectifierThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

Offshore Repair Kit 60 Series 12V with Bearings, Brushes, Regulator/RectifierOffshore Repair Kit, 60 Series Alternators, 12VKit Includes: Regulator Brush Holder Assembly Rear Bearing  Regulator Washer  Rectifier Assembly  Rectifier Gasket  Front Bearing  Instruction Sheet This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Brochure (pdf)

Read more less

Color Display for SG200 2-1/16" Second DisplayAdd a Color Display to an existing SmartLink Network. This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

SmartShunt 350A - 12-48 VDC for SG200 DisplayAdd a SmartShunt for Additional Bank: Includes SmartShunt and SmartLink Com Cable*Works with the SG200 display and or Bluetooth Gateway sold separately. One is needed for Programming.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

95 Series Alternator Pully, Altmount®AltMount® Serpentine PulleyTen-Groove (J10) Serpentine Pulley for 95-Series Alternators2.7″ Diameter, 0.875″ BoreThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

Belt Buddy with Universal Offset Adjustment Arm (UAA2)Belt Buddy Kit; Includes the Universal Adjustment Arm (UAA2) with a 1/2" offset for mounting applications which require an offset to the alternator and Belt Buddy Mechanism (BB).To utilize only the adjustment mechanism with an existing adjustment arm, purchase part number BBU.Caution:  This approach sacrifices some "travel" in the existing adjustment arm so the BBU mechanism can be anchored to the arm.  Make certain your alternator mounting does not need this travel before purchasing the BBU.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

Bluetooth Gateway for SG200Optional 39″ Bluetooth® Gateway for Smartphone App.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

Universal Adjustment Arm - OffsetUniversal Adjustment Arm for the Belt Buddy with a 1/2″ offset for certain mounting applications which require an offset. This part number is for the “Arm Only”, It does not come with the Belt Buddy Adjustment Mechanism.The Belt Buddy Mechanism which goes with the UAA2 is part number BB, grouped together the set is part number UBB2. The Belt Buddy Mechanism which goes with most any adjustment arm is part number BBU.The UAA2 is 10.3″ long and the adjustment slot provides up to 4.5″ of travel.  The adjustment slot is 0.53″ wide.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

Temp Sensor Battery - 20'Temperature Sensor, Battery - 20' LengthThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

Communication Cable SG2320 (N2K) & SG240 (RB-C) M12 - 12"Com Cable connecting to an RV-C CANbus Network via an M12 DeviceNet Connector.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

Temperature Sensor Alternator - 80" LengthIntended for longer runs when the standard 54" Alternator Temp Sensor (PN: MC-TS-A) is insufficient.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

Mounting Plate for SG200 Display - Fits Smartguage™ CutoutBalmar’s Award Winning, 2nd Generation Battery MonitorOptional Adapter Plate for Fitting the SG200 Color Display into a Smartgauge™ CutoutThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less