-
BEP Marine BEP Push Button Switch - 24V Latching On/Off - Blue LED [80-511-0007-01]
Push Button Switch - 24V Latching On/Off - Blue LEDPush-button Switches are built to last with their stainless steel components and silver alloy contacts. The through panel mount switches are ideal for lighting, switch, or dash panels, with colored rings that can be wired to either display power to the system or switch back lighting. The product line includes both switches and warning buzzers with LED light rings.Features: Maximum switch current rating 5 Amps IP67 environmental protection switches WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Color: Blue Action: ON-OFF Box Dimensions: 1"H x 1"W x 2"L WT: 0.05 lbs UPC: 843687005513 Brochure (pdf)
$40.99
-
BEP Marine Marinco Push Button Switch - 24V Latching On/Off - Red LED [80-511-0005-01]
Push Button Switch - 24V Latching On/Off - Red LEDPush-button Switches are built to last with their stainless steel components and silver alloy contacts. The through panel mount switches are ideal for lighting, switch, or dash panels, with colored rings that can be wired to either display power to the system or switch back lighting. The product line includes both switches and warning buzzers with LED light rings.Features: Maximum switch current rating 5 Amps IP67 environmental protection switches WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Color: Red Action: ON-OFF Box Dimensions: 1"H x 2"W x 2"L WT: 0.5 lbs UPC: 843687005490 Brochure (pdf)
$40.99
-
BEP Marine BEP 2-Position SPST Push-Pull Switch w/Wire Leads - OFF/ON [1001306]
2-Position SPST Push-Pull Switch w/Wire Leads - OFF/ONSingle pole, single throw switch turns one circuit on and off. Heavy-duty, noncorrosive construction with moisture-repellent insulators. Brass case, stem, terminals and mounting hardware. Plasticized body helps seal out moisture and dirt. All knobs are screw-on type.Features: Nominal voltage is 6-36V DC Rated for 10A at 12V DC Two 8" 16 AWG wire leads for terminals Fits panels up to 5/8" thick Same as Cole Hersee part number M-606 WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Color: Chrome Action: ON-OFF Throw/Pole: SPST Box Dimensions: 2"H x 3"W x 5"L WT: 0.22 lbs UPC: 870216046006
$39.99
-
BEP Marine BEP 2-Position SPST Heavy-Duty Push Button Switch - OFF/(ON) - 35 Amp [1001504]
2-Position SPST Heavy-Duty Push Button Switch - OFF/(ON) - 35 AmpSingle pole, single throw switch turns one circuit on and off. Can be used for intermittent windshield wiper or horn control.Features: Replacement cap 1001502 Nominal voltage is 6-36V DC Rated for 35A at 12V DC #8-32 screw terminals Fits panels up to 1" thick Same as Cole Hersee part number M-490 WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Action: (ON)-OFF Color: Chrome Throw/Pole: SPST Box Dimensions: 2"H x 3"W x 5"L WT: 0.21 lbs UPC: 870216046075
$37.99
-
BEP Marine BEP Pro Installer Z Bus Bar - 10 Way - 200A [777-Z10W-200]
200A Z Bar 10 Way Bus BarThis patent-pending, space saving bus bar range is a completely new concept for marine cable termination. Offering almost unlimited installation flexibility, the high and low level bars can be bussed together with Z-Link or used as separate positive/negative bars. Pro Installer Z-Bars are available in (10) way and (18) way 200 Amp Z-Bar models for a variety of onboard applications. Easily extend Z-Bars by placing on end or back-to-back Clean installation-all cables can be run from one side of the Z-bar Innovative clear covers insulate and protect on three sides and offer easy acces WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Brochure (pdf)
$36.99
-
BEP Marine BEP Easy Fit Battery Switch - 275A Continuous [700]
Easy Fit Battery Switch - 275A ContinuousThe Easyfit Battery Switch was created for installations where switches need to be recessed through varying thicknesses of panels. It achieves this through an easily removable threaded ring that allows for panel thicknesses up to 3/4" (19 mm). This switch uses the same features as the 701 with the removable key 45 degree past the off position, labeled handle and a removable back cover covering exposed terminals to meet ABYC specifications. It can also be surface mounted offering a unique style compared to other switches available on the market. BEP Marine Battery Switch Test Procedures (UL 1107) Continuous (1 hour), intermittent (5 minutes) and Cranking (engine starting - 10 seconds). The test is to determine the maximum current the switch can handle for the stated time, without the rear terminals exceeding 100 deg C (212 deg F) above the ambient temperature. The continuous and intermittent ratings are tested at 110% of specified ratings. All BEP switches are tested Independently to this specification by a 3rd party laboratory.Features: Can easily be retro-fitted in place of most European post and lever type switches Molded in high temperature, fiber reinforced plastics Tin-plated copper studs and nuts Ignition-protected WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
$35.99
-
BEP Marine BEP 2-Position SPST PVC Coated Push Button Switch - OFF/(ON) [1001506]
2-Position SPST PVC Coated Push Button Switch - OFF/(ON)Single pole, single throw switch turns one circuit on and off. Can be used for any single circuit requiring an On-Off style switch. PVC coated to help protect against moisture and dirt.Features: Replacement cap 1001501 Nominal voltage is 6-36V DC Rated for 10A at 12V DC Two 8" 16 AWG wire leads Same as Cole Hersee part number M-608 WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Throw/Pole: SPST Color: Black Action: (ON)-OFF Box Dimensions: 2"H x 3"W x 5"L WT: 0.4 lbs UPC: 870216046099
$33.99
-
BEP Marine BEP Contour Battery Disconnect Switch - 275A Continuous [701]
Mini Contour Battery Disconnect Switch - 275A ContinuousThis switch offers a number of unique features, the highlight being the Contour Locking System, allowing it to be a stand alone unit, or locked together with other switches. The control knob can be removed by switching to an counterclockwise 45 degree position. This control knob also features an interchangeable labeling system allowing a full range of applications (Item # 713 or 715). Three removable side plates provide access of up to 1/0 cables. The rear cover insulating the rear terminals against any short circuits. This ensures that the switch meets ABYC requirements. BEP Marine Battery Switch Test Procedures (UL 1107) Continuous (1 hour), intermittent (5 minutes) and Cranking (engine starting - 10 seconds). The test is to determine the maximum current the switch can handle for the stated time, without the rear terminals exceeding 100°C (212°F) above the ambient temperature. The continuous and intermittent ratings are tested at 110% of specified ratings. All BEP switches are tested Independently to this specification by a 3rd party laboratory.Features: Can be either surface or recess mounted by cutting a 2.1" (52 mm) hole Available with house knob (OEM # 701B-HB) or with chassis knob (OEM # 701B-CH) Tin-plated copper studs and nuts Ignition-protected WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
$32.99
-
BEP Marine BEP Pro Installer Bus Bar - 6 Way - 100A [BB-6W-2S/DSP]
Bus Bar - 6 Way/100A with 2 Input Studs (with Red and Black)BEP bus bars include tin-plated, brass-insulated mounting bases and flame-resistant flexible plastic covers. The covers are color-coded for polarity and feature a unique push-on fit. Bus Type: Single Output screws: 6 Input studs: 2 Rating (A): 100 WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Owner's Manual (pdf)
$30.99
-
BEP Marine BEP Pro Installer ANL Fuse Holder - 300A [778-ANL]
Fuse Holder ANL 300AProviding high-capacity fusing, fast response and very high interrupt ratings (ANL up to 6,000 Amps, Class-T up to 20,000 Amps), these fuse holders are ideal for protecting today's demanding onboard power electronics technology including inverters and battery chargers. They also protect wiring from short circuits. Pro Installer fuse holders' durable construction allow fuses to run at maximum load. Radiused ends improve cable routing options ANL: for use with 5/16" (8mm) or 3/8" (10mm) ANL fuses WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Fuse Type: ANL Type: Fuse Blocks Box Dimensions: 2"H x 6"W x 7"L WT: 0.4 lbs UPC: 843687006800 Brochure (pdf)
$30.99
-
BEP Marine BEP SPST PVC Coated Toggle Switch - OFF/(ON) [1002003]
SPST PVC Coated Toggle Switch - OFF/(ON)Single pole, single throw toggle switch turns one circuit on and off. Common applications include intermittent horn or windshield wiper control. This toggle switch is PVC coated.Features: Nominal voltage is 12V/24V DC Rated for 25A at 12V DC, 15A at 24V DC 8" 16 AWG wire lead terminals Mounting stem 15/32" fits panels up to 1/4" thick Same as Cole Hersee part number 55020-04 WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Action: (ON)-OFF Throw/Pole: SPST Box Dimensions: 2"H x 3"W x 5"L WT: 0.1 lbs UPC: 870216046624
$29.99
-
BEP Marine BEP Pro Installer Link Bar 35.5 - 42.5mm *5-Pack [779-LB-2-B5]
Pro Installer Link Bar 35.5 - 42.5mm *5-PackPro Installer link bars provide the fastest and most economical way of connecting the Pro Installer line of products to save space and allow for the most compact installations. The common interconnection height of Pro Installer components allows link bars to quickly and easily convert a group of different products into a functional cluster. Pro Installer link bars are made of high purity copper and are tin plated for optimum marine electrical performance. Links can be doubled to accommodate higher loads.
$27.99
-
BEP Marine BEP Multi-Purpose Alarm - 12V [1002301]
Multi-Purpose Alarm - 12VFeatures: A convenient way to add alarm functionality to your dash or panel Buzzer sounds and bright red light illuminates when voltage is present For use with temperature, oil pressure, and engine warning alarm kits Nominal voltage is 12V DC #8-32 screw terminals Red LED WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
$27.99
-
BEP Marine BEP 4-Position Brass Ignition Switch - Accessory/OFF/Ignition Accessory/Start [1001609]
4-Position Brass Ignition Switch - Accessory/OFF/Ignition & Accessory/StartMarine-grade battery ignition and start switch suitable for harsh environments on land or sea.Features: Coded tumbler lock, includes two keys Nominal voltage is 12V DC Rated for accessory: 10A at 12V DC, ignition: 5A at 12V DC, start: 5A at 12V DC #8-32 screw terminals Fits panels up to 1" thick Same as Cole Hersee part number M-712 WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
$27.99
-
BEP Marine BEP SPDT Lighted Toggle Switch - ON/OFF/ON [1001907]
SPDT Lighted Toggle Switch - ON/OFF/ONSingle pole, double throw toggle switch turns one of two circuits on. Common applications include combining nav lights and anchor light with indepedent bulbs or maintained dual windshield wiper control.Features: Nominal voltage is 12V DC Rated for 25A at 12V DC Five 1/4" blade terminals Switch illuminates red when on and is clear when off 15/32" mounting hole, fits panels up to 1/8" thick Same as Cole Hersee part number M-54111-02 WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Action: ON-OFF-ON Color: Clear Throw/Pole: SPDT Box Dimensions: 1"H x 3"W x 5"L WT: 0.07 lbs UPC: 870216046587
$26.99
-
BEP Marine BEP Pro Installer Single Insulated Stud w/Power Tap Plate - 10mm [IST-10MM-1SPT]
Single 10mm Insulated Stud with Power Tap PlateThe Pro Installer insulated studs are a smart choice for marine installers. An increased stainless steel stud length allows up to three cable lugs to be connected, saving space, while the snap-out side skirts allow for additional cable entry. Saves space and adds design flexibility Insert molded cable lugs and fiber-reinforced base provide strength and durability Power tapping plate converts from a single stud to add up to four connection points for smaller cables while leaving access for larger cables Innovative, clear covers insulate and protect on three sides and offer easy access WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Brochure (pdf)
$24.99
-
BEP Marine BEP Pro Installer Double Insulated Stud - 10mm [IST-10MM-2S]
10mm Double Instulated StudThe Pro Installer insulated studs are a smart choice for marine installers. An increased stainless steel stud length allows up to three cable lugs to be connected, saving space, while the snap-out side skirts allow for additional cable entry. Saves space and adds design flexibility Insert molded cable lugs and fiber-reinforced base provide strength and durability Power tapping plate converts from a single stud to add up to four connection points for smaller cables while leaving access for larger cables Innovative, clear covers insulate and protect on three sides and offer easy access WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Brochure (pdf)
$23.99
-
BEP Marine BEP Pro Installer Double Insulated Stud - 8mm [IST-8MM-2S]
Double Insulated Stud 8mmThe Pro Installer insulated studs are a smart choice for marine installers. An increased stainless steel stud length allows up to three cable lugs to be connected, saving space, while the snap-out side skirts allow for additional cable entry. Saves space and adds design flexibility Insert molded cable lugs and fiber-reinforced base provide strength and durability Power tapping plate converts from a single stud to add up to four connection points for smaller cables while leaving access for larger cables Innovative, clear covers insulate and protect on three sides and offer easy access WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Brochure (pdf)
$22.99
-
BEP Marine BEP Pro Installer Link Joiner 6-Way [779-LBJ-6]
Pro Installer Link Joiner 6-WayThis tin-plated bus bar can be used to link 6 adjacent DC products together. The rating varies from 350-650 Amps depending on how this busbar is wired, see drawing for details. Made from tin-plated high-purity copper, this bar is intended for use with the BEP Pro Installer system but it has universal applications anywhere a high amperage link bus is needed. Pro Installer link bars provide the fastest and most economical way of connecting the Pro Installer line of products to save space and allow for the most compact installations. The common interconnection height of Pro Installer components allows link bars to quickly and easily convert a group of different products into a functional cluster. Links can be doubled to accommodate higher loads.Features: Tin-plated high-purity copper for maximum conductivity and corrosion resistance 650 AMP continuous rating between two adjacent positions 350 AMP continuous rating across all positions Bars can be doubled up for additional amperage This link bar is intended to be used with 3/8" studs Hole spacing is 2" Overall dimensions 10.8" x 1" WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
$22.99
-
BEP Marine BEP 2-Position SPST Sealed Rocker Switch - 12V/24V - ON/OFF [1001704]
2-Position SPST Sealed Rocker Switch - 12V/24V - ON/OFFSingle pole, single throw switch turns one circuit on and off.Features: Nominal voltage is 12V/24V DC Rated for 20A at12V DC, 15A at 24V DC Two 1/4" blade terminals Snap fit into panels .093" - .187" thick IP 66 Same as Cole Hersee part number M-58031-01 WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Throw/Pole: SPST Color: Black Action: ON-OFF Box Dimensions: 3"H x 3"W x 5"L WT: 0.08 lbs UPC: 870216046259
$22.99
-
BEP Marine BEP DPDT Contura Switch - 1-Amber LED - ON/OFF/(ON) [1001807]
DPDT Contura Switch - 1-Amber LED - ON/OFF/(ON)Double pole, double throw switch turns two of four circuits on at a time. Common applications include intermittent and maintained windshield wiper control. Contura switches are rated to IP66, high-pressure wash resistant. Recommended for replacements in waterproof electrical panels with rocker switches to ensure waterproof integrity. The black and gray switches and covers are interchangeable with similar switches used as original equipment on many common boat types.Features: Nominal voltage 12V/24V DC Rated for 20A at 12V DC, 15A at 24V DC. 1/4" blade terminals Includes one Amber LED Snap-in mounting to fit panel hole 1.45" x .83" into panels .093" to .187" thick Same as Cole Hersee part number 58332-25 WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Throw/Pole: DPDT Color: Black Action: (ON)-OFF-ON Box Dimensions: 2"H x 3"W x 5"L WT: 0.1 lbs UPC: 870216046464
$22.99
-
BEP Marine BEP DPDT Contura Switch - (ON)/OFF/(ON) [1001809]
DPDT Contura Switch - (ON)/OFF/(ON)Double pole, double throw switch turns two of four circuits on at a time. Common applications include powered hatch control. Contura switches are rated to IP66, high-pressure wash resistant. Recommended for replacements in waterproof electrical panels with rocker switches to ensure waterproof integrity. The black and gray switches and covers are interchangeable with similar switches used as original equipment on many common boat types.Features: Nominal voltage 12V/24V DC Rated for 20A at 12V DC, 15A at 24V DC 1/4" blade terminals Snap-in mounting to fit panel hole 1.45" x .83" into panels .093" to .187" thick Same as Cole Hersee part number 58332-27 WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Throw/Pole: DPDT Color: Black Action: (ON)-OFF-(ON) Box Dimensions: 2"H x 3"W x 5"L WT: 0.1 lbs UPC: 870216046488
$21.99
-
BEP Marine BEP ATC Bus bar - 6 Way - 5mm Input Stud [80-712-0039-00]
ATC Six Way Bus Bar with 5mm Input StudThe ATC Negative Bus uses the BEP Contour lock system to allow it to be joined to the ATC fuse holder. This keeps wiring tidy and conveniently located. Current Rating: 100Amps.WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
$21.99
-
BEP Marine BEP Battery Switch Label Sheet [713]
701 Contour Battery Master SwitchLabel Set (12 Labels) for non-standard labeling.
$17.99
-
BEP Marine BEP Connection Cable Bare End - 300 mm [80-511-0031-00]
Connection Cable Bare End - 300 mmThis 300 mm (12") cable simply pushes onto the back of the push button switches and features 0.8 mm² / 18g cables for switch and backlight connections that comply with ISO/ABYC. Other end is stripped wire for easy connection.WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
$17.99
-
BEP Marine BEP SPDT Contura Switch - 2-LEDs - (ON)/OFF/(ON) [1001804]
SPDT Contura Switch - 2-LEDs - (ON)/OFF/(ON)Single pole, double throw switch turns one of two circuits on. Common applications include intermittent trim tab or windshield wiper control. Contura switches are rated to IP66, high-pressure wash resistant. Recommended for replacements in waterproof electrical panels with rocker switches to ensure waterproof integrity. The black and gray switches and covers are interchangeable with similar switches used as original equipment on many common boat types.Features: Nominal voltage 12V/24V DC Rated for 20A at 12V DC, 15A at 24V DC 1/4" blade terminals Snap-in mounting to fit panel hole 1.45" x .83" into panels .093" to .187" thick Same as Cole Hersee part number 58332-22 WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Throw/Pole: SPDT Color: Black Action: (ON)-OFF-(ON) Box Dimensions: 2"H x 3"W x 5"L WT: 0.09 lbs UPC: 870216046433
$17.99
-
BEP Marine BEP 3-Position Nylon Ignition Switch - OFF/Ignition/Start [1001610]
3-Position Nylon Ignition Switch - OFF/Ignition/StartImpact and corrosion-resistant switch fits standard 7/8" diameter hole and includes PVC boot for added weather protection.Features: Coded tumbler lock for added secutiry, includes two keys Nominal voltage is 6-36V DC Rated for 15A ignition, 5A start #8-32 screw terminals Fits panels upt to 7/8" thick Same as Cole Hersee part number M-850 WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
$17.99
-
BEP Marine BEP 3-Position SPDT Push-Pull Switch - OFF/ON1/ON1 2 [1001301]
3-Position SPDT Push-Pull Switch - OFF/ON1/ON1 & 2Single pole, double throw switch turns on position 1 or position 1 and 2.Features: Heavy-duty, noncorrosive construction with moisture-repellent insulators Brass case, stem, terminals and mounting hardware All knobs are screw-on type Nominal voltage is 6-36V DC. Rated for 10A at 12V DC #8-36 screw terminals Fits panels up to 1" thick Same as Cole Hersee part number M-476 WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Throw/Pole: SPDT Action: ON-ON-OFF Box Dimensions: 2"H x 3"W x 6"L WT: 0.25 lbs UPC: 870216045955
$16.99
-
BEP Marine BEP Pro Installer Link Joinder 4-Way [779-LBJ-4]
Pro Installer Link Joinder 4-WayThis tin-plated bus bar can be used to link 4 adjacent DC products together. The rating varies from 450-650 Amps, depending on how this busbar is wired. Made from tin-plated high-purity copper, this bar is intended for use with the BEP Pro Installer system, but it has universal applications anywhere a high-amperage link bus is needed. Pro Installer link bars provide the fastest and most economical way of connecting the Pro Installer line of products to save space and allow for the most compact installations. The common interconnection height of Pro Installer components allows link bars to quickly and easily convert a group of different products into a functional cluster. Links can be doubled to accommodate higher loads.Features: Tin-plated high-purity copper for maximum conductivity and corrosion resistance 650 AMP continuous rating between two adjacent positions 450 AMP continuous rating across all positions This link bar is intended to be used with 3/8" studs Hole spacing is 2" Overall dimensions 6.9" x 1" WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
$15.99
-
BEP Marine BEP SPST Water-Resistant Toggle Switch - OFF/ON [1002016]
SPST Water-Resistant Toggle Switch - OFF/ONSingle pole, single throw toggle switch turns one circuit on and off. Common applications include any single circuit requiring an on-off style switch. PVC coated for water resistant integrity.Features: Nominal voltage is 12V Rated for 25A at 12V DC 8" 16 AWG wire lead terminals Mounting stem 15/32" fits panels up to 3/16" thick Same as Cole Hersee part number 5582-30 WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Action: ON-OFF Color: Black Throw/Pole: SPST Box Dimensions: 1"H x 3"W x 5"L WT: 0.12 lbs UPC: 870216046754
$15.99
-
BEP Marine BEP Illuminated SPST Rocker Switch - Red LED - 12V - OFF/ON [1001705]
Illuminated SPST Rocker Switch - Red LED - 12V - OFF/ONSingle pole, single throw switch turns one circuit on and off.Features: Nominal voltage of 12V DC Rated for 10A at 12V DC Switches snap-in mounting holes .55" x 1.13", fits panels .02" to .25" thick Black plastic body with clear plastic rocker that illuminates red when ON 1/4" blade terminals Same as Cole Hersee part number 54003 WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Throw/Pole: SPST Color: Black/Red Action: ON-OFF Box Dimensions: 2"H x 3"W x 5"L WT: 0.2 lbs UPC: 870216046266
$15.99
-
BEP Marine BEP DPDT Contura Switch - 2-Amber LEDs - ON/OFF/ON [1001808]
DPDT Contura Switch - 2-Amber LEDs - ON/OFF/ONDouble pole, double throw switch turns two of four circuits on at a time. Common applications combining nav lights and anchor light with independent bulbs, maintained single windshield wiper control. Contura switches are rated to IP66, high-pressure wash resistant. Recommended for replacements in waterproof electrical panels with rocker switches to ensure waterproof integrity. The black and gray switches and covers are interchangeable with similar switches used as original equipment on many common boat types.Features: Nominal voltage 12V/24V DC Rated for 20A at 12V DC, 15A at 24V DC 1/4" blade terminals Includes two Amber LEDs Snap-in mounting to fit panel hole 1.45" x .83" into panels .093" to .187" thick Same as Cole Hersee part number 58332-26 WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Throw/Pole: DPDT Color: Black Action: ON-OFF-ON Box Dimensions: 2"H x 3"W x 5"L WT: 0.1 lbs UPC: 870216046471
$15.99
-
BEP Marine BEP 2-Position SPST Recessed Push Button Switch - OFF/(ON) [1001507]
2-Position SPST Recessed Push Button Switch - OFF/(ON)Single pole, single throw switch turns one circuit on and off. Toggle guard prevents accidental activation. Can be used for intermittent windshield wiper or horn control.Features: Nominal voltage is 6-36V DC Rated for 35A at 12V DC #8-32 screw terminals Fits into panels 1" thick Same as Cole Hersee part number M-612 WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Throw/Pole: SPST Color: Chrome Action: (ON)-OFF Box Dimensions: 2"H x 3"W x 5"L WT: 0.2 lbs UPC: 870216046105
$15.99
-
BEP Marine BEP 2-Position SPST Push Button Switch - OFF/(ON) [1001505]
2-Position SPST Push Button Switch - OFF/(ON)Single pole, single throw switch turns one circuit on and off. Can be used for intermittent horn or windshield wiper control.Features: Replacement cap 1001502 Nominal voltage is 6-36V DC Rated for 10A at 12V DC Same as Cole Hersee part number M-492 WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Action: (ON)-OFF Throw/Pole: SPST Color: Black Box Dimensions: 2"H x 3"W x 5"L WT: 0.14 lbs UPC: 870216046082
$15.99
-
BEP Marine BEP Pro Installer Insulated Stud - Single - 10mm [IST-10MM-1S]
Pro Installer Insulated Stud - Single - 10mmThe Pro Installer insulated studs are a smart choice for marine installers. An increased stainless steel stud length allows up to three cable lugs to be connected, saving space, while the snap-out side skirts allow for additional cable entry.Features: Saves space and adds design flexibility Insert molded cable lugs and fiber-reinforced base provide strength and durability Power tapping plate converts from a single stud to add up to four connection points for smaller cables while leaving access for larger cables Innovative, clear covers insulate and protect on three sides and offer easy access WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
$15.99
-
BEP Marine BEP Pro Installer Dual Insulated Distribution Stud - 1/4" [IS-6MM-2/DSP]
Insulated Distribution Stud, Dual 1/4" - (Black)Dual Stud Made with high temperature plastic bases Stud covers push securely over the threaded stud covering to ABYC standards Dual studs ideal for +ve / -ve connections, branch circuits, windlass or inverter installations Covers supplied with display versions WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
$15.99
-
BEP Marine BEP SPDT Sealed Toggle Switch - (ON)/OFF/(ON) [1002009]
SPDT Sealed Toggle Switch - (ON)/OFF/(ON)Single pole, double throw toggle switch turns one of two circuits on and off. Common applications include intermittent trim tab or windshield wiper control. Completely sealed switches built to stand up to the most extreme conditions. Engineered to IP67 specifications utilizing a double o-ring within a bushing at the toggle and a full epoxy seal at the back.Features: Nominal voltage is 12V/24V DC Rated for 25A at 12V DC, 15A at 24V DC 10" 14 AWG wire lead terminals Mounting stem 15/32" fits panels up to 1/8" thick Same as Cole Hersee part number 55025-04 WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Action: (ON)-OFF-(ON) Color: Chrome Throw/Pole: SPDT Box Dimensions: 2"H x 3"W x 5"L WT: 0.19 lbs UPC: 870216046686
$14.99
-
BEP Marine BEP SPST Sealed Toggle Switch - OFF/(ON) [1002006]
SPST Sealed Toggle Switch - OFF/(ON)Single pole, single throw toggle switch turns one circuit on and off. Common applications include intermittent horn or windshield wiper control. Completely sealed switches built to stand up to the most extreme conditions. Engineered to IP67 specifications utilizing a double o-ring within a bushing at the toggle and a full epoxy seal at the back.Features: Nominal voltage is 12V/24V DC Rated for 25A at 12V DC, 15A at 24V DC 10" 14 AWG wire lead terminals Mounting stem 15/32" fits panels up to 1/8" thick Same as Cole Hersee part number 55025-01 WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Action: (ON)-OFF Color: Chrome Throw/Pole: SPST Box Dimensions: 2"H x 3"W x 5"L WT: 0.18 lbs UPC: 870216046655
$14.99
-
BEP Marine BEP SPST Nylon Toggle Switch - 12V - ON/OFF [1001901]
SPST Nylon Toggle Switch - 12V - ON/OFFSingle pole, single throw toggle switch turns one circuit on and off.Features: Standard black nylon handle Nominal voltage is 12V DC Rated for 25A at 12V DC Two 1/4" blade terminals Mounting stem 15/32" fits panels up to 1/8" thick Same as Cole Hersee part number 54100-01 WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Throw/Pole: SPST Color: Black Action: ON-OFF Box Dimensions: 2"H x 3"W x 5"L WT: 0.1 lbs UPC: 870216046525
$14.99
-
BEP Marine BEP 2-Position SPST Moisture Sealed Push Button Switch - OFF/(ON) [1001503]
2-Position SPST Moisture Sealed Push Button Switch - OFF/(ON)Single pole, single throw switch turns one circuit on and off. Can be used for intermittent windshield wiper or horn control.Features: Gasket-sealed brass case protects against moisture and dirt Replacement cap 1001502 Nominal voltage is 6-36V DC Rated for 10A at 12V DC #8-32 screw terminals Fits panels up to 1" thick Same as Cole Hersee part number M-485 WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Action: (ON)-OFF Color: Black Throw/Pole: SPST Box Dimensions: 2"H x 3"W x 5"L WT: 0.2 lbs UPC: 870216046068
$14.99
-
BEP Marine BEP Pro Installer Insulated Stud Single - 8mm [IST-8MM-1S]
Insulated Stud Single 8mmThe Pro Installer insulated studs are a smart choice for marine installers. An increased stainless steel stud length allows up to three cable lugs to be connected, saving space, while the snap-out side skirts allow for additional cable entry. Saves space and adds design flexibility Insert molded cable lugs and fiber-reinforced base provide strength and durability Power tapping plate converts from a single stud to add up to four connection points for smaller cables while leaving access for larger cables Innovative, clear covers insulate and protect on three sides and offer easy access WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
$14.99
-
BEP Marine BEP DPST Contura Switch - 1-Amber LED - OFF/ON [1001811]
DPST Contura Switch - 1-Amber LED - OFF/ONDouble pole, single throw switch turns two circuits on at the same time. Common applications include simultaneous control of anchor and running lights. Contura switches are rated to IP66, high-pressure wash resistant. Recommended for replacements in waterproof electrical panels with rocker switches to ensure waterproof integrity. The black and gray switches and covers are interchangeable with similar switches used as original equipment on many common boat types.Features: Nominal voltage 12V/24V DC Rated for 20A at 12V DC, 15A at 24V DC 1/4" blade terminals Includes one Amber LED Snap-in mounting to fit panel hole 1.45" x .83" into panels .093" to .187" thick Same as Cole Hersee part number 58332-29 WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Throw/Pole: DPST Color: Black Action: ON-OFF Box Dimensions: 2"H x 3"W x 5"L WT: 0.2 lbs UPC: 870216046501
$13.99
-
BEP Marine BEP 2-Position SPST Push-Pull Switch - OFF/ON [1001302]
2-Position SPST Push-Pull Switch - OFF/ONSingle pole, single throw switch turns one circuit on and off.Features: Heavy-duty, noncorrosive construction with moisture-repellent insulators Brass case, stem, terminals and mounting hardware All knobs are screw-on type Nominal voltage is 6-36V DC Rated for 10A at 12V DC #8-32 screw terminals Fits panels up to 1" thick Same as Cole Hersee part number M-482 WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Throw/Pole: SPST Color: Chrome Action: ON-OFF Box Dimensions: 2"H x 3"W x 5"L WT: 0.16 lbs UPC: 870216045962
$13.99
-
BEP Marine BEP Piezo Buzzer - 42mm - 5-20V - 97DB [54-35C2/DSP]
Piezo Buzzer, 42mm 5-20V 97DBEspecially suitable for use with the new 701-MDCZ CZone optimized motorized battery switch, this piezo buzzer is also useful wherever a loud single tone alarm is required. 97 decibel output at 9 Volts Frequency 2.8 KHz Voltage 5-20 Volts (Suitable for use with 701-MDCZ battery switch) on 24 volt systems) Power consumption 12mA at 12 Volts WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
$13.99
-
BEP Marine BEP Pro Installer Link Joiner 3-Way [779-LBJ-3]
Pro Installer Link Joiner 3-WayPro Installer link bars provide the fastest and most economical way of connecting the Pro Installer line of products to save space and allow for the most compact installations. The common interconnection height of Pro Installer components allows link bars to quickly and easily convert a group of different products into a functional cluster. Pro Installer link bars are made of high-purity copper and are tin-plated for optimum marine electrical performance. Links can be doubled to accommodate higher loads.Features: Tin-plated high-purity copper for maximum conductivity and corrosion resistance 650 AMP continuous rating between two adjacent positions 525 AMP continuous rating across all positions Bars can be doubled up to increase the rating This link bar is intended to be used with 3/8" studs Hole spacing is 2" Overall dimensions 4.9" x 1"
$12.99
-
BEP Marine BEP SPST Sealed Toggle Switch - OFF/ON [1002010]
SPST Sealed Toggle Switch - OFF/ONSingle pole, single throw toggle switch turns one circuit on and off. Common applications include use for any single circuit requiring an on-off style switch. Completely sealed switches built to stand up to the most extreme conditions. Engineered to IP67 specifications utilizing a double o-ring within a bushing at the toggle and a full epoxy seal at the back.Features: Nominal voltage is 12V/24V DC Rated for 25A at 12V DC, 15A at 24V DC 10" 14 AWG wire lead terminals Mounting stem 15/32" fits panels up to 1/8" thick Same as Cole Hersee part number 55025 WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Action: ON-OFF Color: Chrome Throw/Pole: SPST Box Dimensions: 2"H x 3"W x 5"L WT: 0.17 lbs UPC: 870216046693
$12.99
-
BEP Marine BEP SPDT Rocker Switch - 2-LEDs - 12V/24V - ON/OFF/ON [1001715]
SPDT Rocker Switch - 2-LEDs - 12V/24V - ON/OFF/ONSingle pole, double throw switch turns one of two circuits on.Features: Includes two LEDs The nominal voltage is 12V DC Rated for 25A at12V DC Four 1/4" blade terminals Snap-in mounting to fit panel hole 1.45" x .83" into panels .093" to .187" thick Same as Cole Hersee part number 58327-06 WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Throw/Pole: SPDT Color: Black Action: ON-OFF-ON Box Dimensions: 2"H x 3"W x 5"L WT: 0.08 lbs UPC: 870216046365
$12.99
-
BEP Marine BEP Contura Triple Switch Mounting Bracket [1001701]
Contura Triple Switch Mounting BracketTwo end sections, one center section, and one hole plug.Features: Modular design permits assembly in groups - can be used with part number 1001702 Used with Rocker Switches and Contoura Switches Same as Cole Hersee part number 82159-02 WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
$12.99