FREE SHIPPING ON ORDERS OVER $100.0 Dollars!

Show previous products

  • Sale -$22.55 BEP Pro Installer 400A Selector Battery Switch - MC10 [771-S] BEP Pro Installer 400A Selector Battery Switch - MC10 [771-S]

    BEP Marine BEP Pro Installer 400A Selector Battery Switch - MC10 [771-S]

    Pro Installer 400A Selector Battery Switch - MC10Power requirements on boats have increased, and these 2 Selector switches offer high power capacity (400 amps continuous), the ability to easily fit doubled cables, and conform to the industry standard mounting footprint (Guest, Perko, Blue Sea). Please note selector switches will not separate electronics from harmful engine starting spikes.SpecificationsMounting: Surface, Rear or FrontVoltage: 48v DC (for 12-48v systems)Rating: 400 Cont / 600 Inter / 1500 CrankDims: 3.85" x 3.85" x 3.62"Operation: 1-2-Both-OffStud: 3x 10 mm (3.8")WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: AFD: No Lockable: No Positions: 1-2-Both-Off Continuous Amperage: 400a Box Dimensions: 4"H x 7"W x 8"L WT: 1 lbs UPC: 843687007760 Owner's Manual (pdf)Brochure (pdf)

    Read more

    $68.54 $45.99

  • Sale -$21.11 BEP 4-Position Sealed Nylon Ignition Switch - Accessory/OFF/Ignition Accessory/Start [1001603]

    BEP Marine BEP 4-Position Sealed Nylon Ignition Switch - Accessory/OFF/Ignition Accessory/Start [1001603]

    4-Position Sealed Nylon Ignition Switch - Accessory/OFF/Ignition & Accessory/StartSealed keyed switches with integral Deutsch connectors feature fully sealed contact areas with O-rings and ultrasonic welding to IP67 waterproof rating. High-impact plastic for corrosion resistance and tested to SAE J259 for ignition switches.Features: Nominal voltage is 12V/24V DC Rated for 10A at 12V DC, 5A at 24V DC Fits panels up to 3/8" thick Same as Cole Hersee part number 95060-50 WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

    Read more

    $62.10 $40.99

  • Sale -$19.36 BEP 12V Buzzer w/Red LED Warning Light - Stainless Steel [80-511-0009-00]

    BEP Marine BEP 12V Buzzer w/Red LED Warning Light - Stainless Steel [80-511-0009-00]

    12V Buzzer with Red LED Warning Light - Stainless SteelBuzzers are built to last with their stainless steel components and silver alloy contacts. The through panel mount switches are ideal for lighting, switch, or dash panels, with colored rings that can be wired to either display power to the system or switch backlighting. The product line includes both switches and warning buzzers with LED light rings.Features: IP50 environmental protection buzzers 80-decibel buzzer sound intensity WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

    Read more

    $58.35 $38.99

  • Sale -$19.36 BEP Push-Button Switch 12V Momentary On/Off - Blue LED [80-511-0004-00]

    View options

    BEP Marine BEP Push-Button Switch 12V Momentary On/Off - Blue LED [80-511-0004-00]

    Push-Button Switch 12V Momentary On/Off - Blue LEDPush-Button switches and buzzers are built to last with their stainless steel components and silver alloy contacts. The through panel mount switches are ideal for lighting, switch, or dash panels, with colored rings that can be wired to either display power to the system or switch back lighting. The product line includes both switches and warning buzzers.Features: Maximum switch current rating 5 amps IP67 environmental protection switches IP50 environmental protection buzzers 80 decibel buzzer sound intensity Warning buzzers flash red on alarm WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Action: On/Off Color: Stainless Box Dimensions: 1"H x 3"W x 4"L WT: 0.2 lbs UPC: 843687005933

    Read more

    $58.35 $38.99

    View options

  • Sale -$19.36 BEP Push-Button Switch 12V Momentary On/Off - Red LED [80-511-0002-00]

    BEP Marine BEP Push-Button Switch 12V Momentary On/Off - Red LED [80-511-0002-00]

    Push-Button Switch 12V Momentary On/Off - Red LEDPush-Button switches and buzzers are built to last with their stainless steel components and silver alloy contacts. The through panel mount switches are ideal for lighting, switch, or dash panels, with colored rings that can be wired to either display power to the system or switch back lighting. The product line includes both switches and warning buzzers.Features: Maximum switch current rating 5 amps IP67 environmental protection switches IP50 environmental protection buzzers 80 decibel buzzer sound intensity Warning buzzers flash red on alarm WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Action: On/Off Color: Stainless Box Dimensions: 2"H x 3"W x 4"L WT: 0.2 lbs UPC: 843687005919

    Read more

    $58.35 $38.99

  • Sale -$19.36 BEP Push-Button Switch 12V Latching On/Off - Blue LED [80-511-0003-00]

    View options

    BEP Marine BEP Push-Button Switch 12V Latching On/Off - Blue LED [80-511-0003-00]

    Push-Button Switch 12V Latching On/Off - Blue LEDPush-Button switches and buzzers are built to last with their stainless steel components and silver alloy contacts. The through panel mount switches are ideal for lighting, switch, or dash panels, with colored rings that can be wired to either display power to the system or switch back lighting. The product line includes both switches and warning buzzers.Features: Maximum switch current rating 5 amps IP67 environmental protection switches IP50 environmental protection buzzers 80 decibel buzzer sound intensity Warning buzzers flash red on alarm WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Action: On/Off Color: Stainless Box Dimensions: 1"H x 3"W x 4"L WT: 0.2 lbs UPC: 843687005926

    Read more

    $58.35 $38.99

    View options

  • Sale -$19.07 BEP Dual Distribution Stud Module - 2 x 3/8" [702-2S]

    BEP Marine BEP Dual Distribution Stud Module - 2 x 3/8" [702-2S]

    Dual Distribution Stud Module - 2 x 3/8"The 702-2S was designed specifically for transom areas for connecting battery cables from outboards. It also has many other applications where heavy duty positive and negative connections need to be terminated.WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

    Read more

    $57.06 $37.99

  • Sale -$17.88 BEP Panel-Mounted Battery Mini Selector Switch [701S-PM]

    View options

    BEP Marine BEP Panel-Mounted Battery Mini Selector Switch [701S-PM]

    Panel-Mounted Battery Mini Selector SwitchPanel-mounted switches are designed specifically for panel mount applications. This range gives a very compact, versatile solution. Compact, lightweight Countersunk recesses for surface mount application Standard 2-1/16" (52 mm) hole cut out (same as standard gauge hole) Inside: captive inserts for 3/16" (4.8 mm) nuts providing full access for cables with no restrictions Standard interchange label system Molded in high temperature, fiber reinforced plastics WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

    Read more

    $54.87 $36.99

    View options

  • Sale -$17.88 BEP 65A PVC Coated Continuous Duty Solenoid [1002205]

    BEP Marine BEP 65A PVC Coated Continuous Duty Solenoid [1002205]

    65A PVC Coated Continuous Duty SolenoidRemotely switch high amperage loads with a low amperage on-off switch.Features: Continuous duty, 65A at 12V DC Intermittent rating 100A: 10 seconds Copper #10-32 thread signal terminals Copper 5/16”-24 thread contact terminals PVC coated steel case Bracket mounting holes 5/16” x 19/32”, 2-13/64” on centers UL and CE approved Same as Cole Hersee part number 24117-01 WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

    Read more

    $53.87 $35.99

  • Sale -$17.31 BEP Mini Battery Selector Switch [701S]

    BEP Marine BEP Mini Battery Selector Switch [701S]

    Mini Battery Selector SwitchThe 701S is the most compact selector switch available on the market. While BEP recommends isolated battery systems as outlined with our distribution clusters, the 701S provides a simple economical way of separating two batteries. BEP Marine Battery Switch Test Procedures (UL 1107) Continuous (1 hour), intermittent (5 minutes) and Cranking (engine starting - 10 seconds). The test is to determine the maximum current the switch can handle for the stated time, without the rear terminals exceeding 100 deg C (212 deg F) above the ambient temperature. The continuous and intermittent ratings are tested at 110% of specified ratings. All BEP switches are tested Independently to this specification by a 3rd party laboratory. Housed in the same dimensions as the 701, and includes the same removable side plates and back cover Please note selector switches will not separate electronics from harmful engine starting spikes Tin-plated copper studs and nuts Ignition-protected WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Quick Guide (pdf)Owner's Manual (pdf)

    Read more

    $53.30 $35.99

  • Sale -$22.07 BEP 24V Buzzer w/Warning Light - Red [80-511-0010-01]

    BEP Marine BEP 24V Buzzer w/Warning Light - Red [80-511-0010-01]

    24V Buzzer w/Warning Light - RedPush-button Switches are built to last with their stainless steel components and silver alloy contacts. The through panel mount switches are ideal for lighting, switch, or dash panels, with colored rings that can be wired to either display power to the system or switch back lighting. The product line includes both switches and warning buzzers with LED light rings.Features: Maximum switch current rating 5 Amps IP67 environmental protection switches WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Color: Red Box Dimensions: 1"H x 2"W x 3"L WT: 0.01 lbs UPC: 843687005629 Brochure (pdf)

    Read more

    $58.06 $35.99

  • Sale -$16.69 BEP Lever-Operated Master Disconnect - ON/OFF [1001001]

    BEP Marine BEP Lever-Operated Master Disconnect - ON/OFF [1001001]

    Lever-Operated Master Disconnect - ON/OFFThis single pole, single throw switch turns one circuit on and off.Features: Nominal Voltage is 6-36V DC with 175A continuous and 800A intermittent ratings Has 3/8" brass terminal studs Includes face plate which indicates position of the M284 switch 3/4" mounting hole, up to 5/16" panel thickness Compares to Cole Hersee part number M-284-09-BP WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

    Read more

    $51.68 $34.99

  • Sale -$17.08 BEP Remote Emergency Parallel Switch [80-724-0007-00]

    View options

    BEP Marine BEP Remote Emergency Parallel Switch [80-724-0007-00]

    Remote Emergency Parallel SwitchThe Remote Emergency Parallel Switch is used for convenient remote activation of the 10 minute emergency parallel function on motorized Voltage Sensitive and Emergency Paralell switches. It can be mounted standalone or within the Contour Connect panel range.WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

    Read more

    $51.07 $33.99

    View options

  • Sale -$17.64 BEP Push Button Switch - 24V Latching On/Off - Blue LED [80-511-0007-01]

    BEP Marine BEP Push Button Switch - 24V Latching On/Off - Blue LED [80-511-0007-01]

    Push Button Switch - 24V Latching On/Off - Blue LEDPush-button Switches are built to last with their stainless steel components and silver alloy contacts. The through panel mount switches are ideal for lighting, switch, or dash panels, with colored rings that can be wired to either display power to the system or switch back lighting. The product line includes both switches and warning buzzers with LED light rings.Features: Maximum switch current rating 5 Amps IP67 environmental protection switches WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Color: Blue Action: On/Off Box Dimensions: 1"H x 1"W x 2"L WT: 0.05 lbs UPC: 843687005513 Brochure (pdf)

    Read more

    $51.63 $33.99

  • Sale -$17.64 Marinco Push Button Switch - 24V Latching On/Off - Red LED [80-511-0005-01]

    BEP Marine Marinco Push Button Switch - 24V Latching On/Off - Red LED [80-511-0005-01]

    Push Button Switch - 24V Latching On/Off - Red LEDPush-button Switches are built to last with their stainless steel components and silver alloy contacts. The through panel mount switches are ideal for lighting, switch, or dash panels, with colored rings that can be wired to either display power to the system or switch back lighting. The product line includes both switches and warning buzzers with LED light rings.Features: Maximum switch current rating 5 Amps IP67 environmental protection switches WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Color: Red Action: On/Off Box Dimensions: 1"H x 2"W x 2"L WT: 0.5 lbs UPC: 843687005490 Brochure (pdf)

    Read more

    $51.63 $33.99

  • Sale -$15.49 BEP Easy Fit Battery Switch - 275A Continuous [700]

    BEP Marine BEP Easy Fit Battery Switch - 275A Continuous [700]

    Easy Fit Battery Switch - 275A ContinuousThe Easyfit Battery Switch was created for installations where switches need to be recessed through varying thicknesses of panels. It achieves this through an easily removable threaded ring that allows for panel thicknesses up to 3/4" (19 mm). This switch uses the same features as the 701 with the removable key 45 degree past the off position, labeled handle and a removable back cover covering exposed terminals to meet ABYC specifications. It can also be surface mounted offering a unique style compared to other switches available on the market. BEP Marine Battery Switch Test Procedures (UL 1107) Continuous (1 hour), intermittent (5 minutes) and Cranking (engine starting - 10 seconds). The test is to determine the maximum current the switch can handle for the stated time, without the rear terminals exceeding 100 deg C (212 deg F) above the ambient temperature. The continuous and intermittent ratings are tested at 110% of specified ratings. All BEP switches are tested Independently to this specification by a 3rd party laboratory.Features: Can easily be retro-fitted in place of most European post and lever type switches Molded in high temperature, fiber reinforced plastics Tin-plated copper studs and nuts Ignition-protected WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

    Read more

    $47.48 $31.99

  • Sale -$15.63 BEP 2-Position Ignition Switch - OFF/ON [1001605]

    BEP Marine BEP 2-Position Ignition Switch - OFF/ON [1001605]

    2-Position Ignition Switch - OFF/ONMarine-grade battery ignition and start switch suitable for harsh environments on land or sea.Features: Coded tumbler lock, includes two keys Nominal voltage is 12V DC Rated for 10A at 12V DC #8-32 screw terminals Fits panels up to 1" thick Same as Cole Hersee part number M-489 WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Color: Chrome Action: On/Off Box Dimensions: 2"H x 3"W x 5"L WT: 0.4 lbs UPC: 870216046167

    Read more

    $46.62 $30.99

  • Sale -$14.87 BEP Pro Installer Z Bus Bar - 10 Way - 200A [777-Z10W-200]

    BEP Marine BEP Pro Installer Z Bus Bar - 10 Way - 200A [777-Z10W-200]

    200A Z Bar 10 Way Bus BarThis patent-pending, space saving bus bar range is a completely new concept for marine cable termination. Offering almost unlimited installation flexibility, the high and low level bars can be bussed together with Z-Link or used as separate positive/negative bars. Pro Installer Z-Bars are available in (10) way and (18) way 200 Amp Z-Bar models for a variety of onboard applications. Easily extend Z-Bars by placing on end or back-to-back Clean installation-all cables can be run from one side of the Z-bar Innovative clear covers insulate and protect on three sides and offer easy acces WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Brochure (pdf)

    Read more

    $45.86 $30.99

  • Sale -$14.36 BEP 3-Position Sealed Nylon Ignition Switch - OFF/Ignition Accessory/Ignition Start [1001604]

    BEP Marine BEP 3-Position Sealed Nylon Ignition Switch - OFF/Ignition Accessory/Ignition Start [1001604]

    3-Position Sealed Nylon Ignition Switch - OFF/Ignition & Accessory/Ignition & StartSealed keyed switches with integral Deutsch connectors feature fully sealed contact areas with O-rings and ultrasonic welding to IP67 waterproof rating. High-impact plastic for corrosion resistance and tested to SAE J259 for ignition switches.Features: Nominal voltage is 12V/24V DC Rated for 10A at 12V DC, 5A at 24V DC Fits panels up to 3/8" thick Same as Cole Hersee part number 95060-60 WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

    Read more

    $44.35 $29.99

  • Sale -$20.05 BEP Push Button Switch - 24V Momentary (On)/Off - Blue LED [80-511-0008-01]

    BEP Marine BEP Push Button Switch - 24V Momentary (On)/Off - Blue LED [80-511-0008-01]

    Push Button Switch - 24V Momentary (On)/Off - Blue LEDPush-button Switches are built to last with their stainless steel components and silver alloy contacts. The through panel mount switches are ideal for lighting, switch, or dash panels, with colored rings that can be wired to either display power to the system or switch back lighting. The product line includes both switches and warning buzzers with LED light rings.Features: Maximum switch current rating 5 Amps IP67 environmental protection switches WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Color: Blue Action: (On)/Off Box Dimensions: 1"H x 1"W x 2"L WT: 0.1 lbs UPC: 843687005520 Brochure (pdf)

    Read more

    $50.04 $29.99

  • Sale -$20.05 BEP Push-Button Switch - 12V Momentary (On)/Off - Red LED [80-511-0002-01]

    BEP Marine BEP Push-Button Switch - 12V Momentary (On)/Off - Red LED [80-511-0002-01]

    Push-Button Switch - 12V Momentary (On)/Off - Red LEDPush-button Switches are built to last with their stainless steel components and silver alloy contacts. The through panel mount switches are ideal for lighting, switch, or dash panels, with colored rings that can be wired to either display power to the system or switch back lighting. The product line includes both switches and warning buzzers with LED light rings.Features: Maximum switch current rating 5 Amps IP67 environmental protection switches WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Color: Red Action: (On)/Off Box Dimensions: 1"H x 1"W x 2"L WT: 0.1 lbs UPC: 843687005469 Brochure (pdf)

    Read more

    $50.04 $29.99

  • Sale -$12.95 BEP 85A Remote Switching Continuous Duty Solenoid [1002204]

    View options

    BEP Marine BEP 85A Remote Switching Continuous Duty Solenoid [1002204]

    85A Remote Switching Continuous Duty SolenoidCan be used with Electro-Scan MSDs and other high-amp circuits with remote operation.Features: Continuous duty, 85A at 12V DC Intermittent rating 750A make/100A break, 10 seconds On, 30 minutes Off Insulated ground Steel housing, brass hardware UL listed and CE certified Same as Cole Hersee part number 24059 WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

    Read more

    $39.94 $26.99

    View options

  • Sale -$13.90 BEP Contour Battery Disconnect Switch - 275A Continuous [701]

    BEP Marine BEP Contour Battery Disconnect Switch - 275A Continuous [701]

    Mini Contour Battery Disconnect Switch - 275A ContinuousThis switch offers a number of unique features, the highlight being the Contour Locking System, allowing it to be a stand alone unit, or locked together with other switches. The control knob can be removed by switching to an counterclockwise 45 degree position. This control knob also features an interchangeable labeling system allowing a full range of applications (Item # 713 or 715). Three removable side plates provide access of up to 1/0 cables. The rear cover insulating the rear terminals against any short circuits. This ensures that the switch meets ABYC requirements. BEP Marine Battery Switch Test Procedures (UL 1107) Continuous (1 hour), intermittent (5 minutes) and Cranking (engine starting - 10 seconds). The test is to determine the maximum current the switch can handle for the stated time, without the rear terminals exceeding 100°C (212°F) above the ambient temperature. The continuous and intermittent ratings are tested at 110% of specified ratings. All BEP switches are tested Independently to this specification by a 3rd party laboratory.Features: Can be either surface or recess mounted by cutting a 2.1" (52 mm) hole Available with house knob (OEM # 701B-HB) or with chassis knob (OEM # 701B-CH) Tin-plated copper studs and nuts Ignition-protected WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

    Read more

    $40.89 $26.99

  • Sale -$11.96 BEP Pro Installer ANL Fuse Holder - 300A [778-ANL] BEP Pro Installer ANL Fuse Holder - 300A [778-ANL]

    BEP Marine BEP Pro Installer ANL Fuse Holder - 300A [778-ANL]

    Fuse Holder ANL 300AProviding high-capacity fusing, fast response and very high interrupt ratings (ANL up to 6,000 Amps, Class-T up to 20,000 Amps), these fuse holders are ideal for protecting today's demanding onboard power electronics technology including inverters and battery chargers. They also protect wiring from short circuits. Pro Installer fuse holders' durable construction allow fuses to run at maximum load. Radiused ends improve cable routing options ANL: for use with 5/16" (8mm) or 3/8" (10mm) ANL fuses WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Fuse Type: ANL Type: Fuse Blocks Box Dimensions: 2"H x 6"W x 7"L WT: 0.4 lbs UPC: 843687006800 Brochure (pdf)

    Read more

    $36.95 $24.99

  • Sale -$12.28 BEP Pro Installer Link Bar 35.5 - 42.5mm *5-Pack [779-LB-2-B5]

    View options

    BEP Marine BEP Pro Installer Link Bar 35.5 - 42.5mm *5-Pack [779-LB-2-B5]

    Pro Installer Link Bar 35.5 - 42.5mm *5-PackPro Installer link bars provide the fastest and most economical way of connecting the Pro Installer line of products to save space and allow for the most compact installations. The common interconnection height of Pro Installer components allows link bars to quickly and easily convert a group of different products into a functional cluster. Pro Installer link bars are made of high purity copper and are tin plated for optimum marine electrical performance. Links can be doubled to accommodate higher loads.

    Read more

    $36.27 $23.99

    View options

  • Sale -$11.08 BEP 100A Engine Starting Intermittent Duty Solenoid [1002206]

    BEP Marine BEP 100A Engine Starting Intermittent Duty Solenoid [1002206]

    100A Engine Starting Intermittent Duty SolenoidIntermittent switching of high amperage loads with a low amperage on-off switch.Features: Rated at 750A make/100A break, this solenoid is for intermittent use only: 10 seconds ON, 20 minutes OFF (ideal for engine cranking) Signal voltage of 12V DC and contact voltage of 6-12V DC #10/32 thread signal terminals Copper 5/16”-24 thread contact terminals Bracket mounting holes 5/16” x 19/32”, 2-13/64” on center Same as Cole Hersee part number M-200 WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

    Read more

    $35.07 $23.99

  • Sale -$11.82 BEP Panel-Mounted Battery Master Switch [701-PM]

    BEP Marine BEP Panel-Mounted Battery Master Switch [701-PM]

    Panel-Mounted Battery Master SwitchPanel-mounted switches are designed specifically for panel mount applications. This range gives a very compact, versatile solution. Compact, lightweight Removable key Countersunk recesses for surface mount application Standard 2-1/16" (52 mm) hole cut out (same as standard gauge hole) Inside: captive inserts for 3/16" (4.8 mm) nuts providing full access for cables with no restrictions Standard interchange label system Molded in high temperature, fiber reinforced plastics WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

    Read more

    $35.81 $23.99

  • Sale -$10.46 BEP Multi-Purpose Alarm - 12V [1002301]

    BEP Marine BEP Multi-Purpose Alarm - 12V [1002301]

    Multi-Purpose Alarm - 12VFeatures: A convenient way to add alarm functionality to your dash or panel Buzzer sounds and bright red light illuminates when voltage is present For use with temperature, oil pressure, and engine warning alarm kits Nominal voltage is 12V DC #8-32 screw terminals Red LED WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

    Read more

    $33.45 $22.99

  • Sale -$10.63 BEP 4-Position Brass Ignition Switch - Accessory/OFF/Ignition Accessory/Start [1001609]

    BEP Marine BEP 4-Position Brass Ignition Switch - Accessory/OFF/Ignition Accessory/Start [1001609]

    4-Position Brass Ignition Switch - Accessory/OFF/Ignition & Accessory/StartMarine-grade battery ignition and start switch suitable for harsh environments on land or sea.Features: Coded tumbler lock, includes two keys Nominal voltage is 12V DC Rated for accessory: 10A at 12V DC, ignition: 5A at 12V DC, start: 5A at 12V DC #8-32 screw terminals Fits panels up to 1" thick Same as Cole Hersee part number M-712 WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

    Read more

    $33.62 $22.99

  • Sale -$11.38 BEP 3-Position Ignition Switch - OFF/Ignition-Accessory/Start [1001607] BEP 3-Position Ignition Switch - OFF/Ignition-Accessory/Start [1001607]

    BEP Marine BEP 3-Position Ignition Switch - OFF/Ignition-Accessory/Start [1001607]

    3-Position Ignition Switch - OFF/Ignition-Accessory/StartMarine-grade battery ignition and start switch suitable for harsh environments on land or sea.Features: Coded tumbler lock, includes two keys Nominal voltage is 12V DC Rated for ignition: 10A at 12V DC and start: 5A at 12V DC #8-32 screw terminals Fits panels up to 1" thick Same as Cole Hersee part number M-550 WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

    Read more

    $33.37 $21.99

  • Sale -$9.99 BEP Pro Installer Single Insulated Stud w/Power Tap Plate - 10mm [IST-10MM-1SPT]

    BEP Marine BEP Pro Installer Single Insulated Stud w/Power Tap Plate - 10mm [IST-10MM-1SPT]

    Single 10mm Insulated Stud with Power Tap PlateThe Pro Installer insulated studs are a smart choice for marine installers. An increased stainless steel stud length allows up to three cable lugs to be connected, saving space, while the snap-out side skirts allow for additional cable entry. Saves space and adds design flexibility Insert molded cable lugs and fiber-reinforced base provide strength and durability Power tapping plate converts from a single stud to add up to four connection points for smaller cables while leaving access for larger cables Innovative, clear covers insulate and protect on three sides and offer easy access WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Brochure (pdf)

    Read more

    $30.98 $20.99

  • Sale -$8.00 BEP Pro Installer Link Joiner 6-Way [779-LBJ-6]

    BEP Marine BEP Pro Installer Link Joiner 6-Way [779-LBJ-6]

    Pro Installer Link Joiner 6-WayThis tin-plated bus bar can be used to link 6 adjacent DC products together.  The rating varies from 350-650 Amps depending on how this busbar is wired, see drawing for details.  Made from tin-plated high-purity copper, this bar is intended for use with the BEP Pro Installer system but it has universal applications anywhere a high amperage link bus is needed. Pro Installer link bars provide the fastest and most economical way of connecting the Pro Installer line of products to save space and allow for the most compact installations. The common interconnection height of Pro Installer components allows link bars to quickly and easily convert a group of different products into a functional cluster. Links can be doubled to accommodate higher loads.Features: Tin-plated high-purity copper for maximum conductivity and corrosion resistance 650 AMP continuous rating between two adjacent positions 350 AMP continuous rating across all positions Bars can be doubled up for additional amperage This link bar is intended to be used with 3/8" studs Hole spacing is 2"  Overall dimensions 10.8" x 1" WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

    Read more

    $27.99 $19.99

  • Sale -$9.62 BEP Pro Installer Double Insulated Stud - 10mm [IST-10MM-2S]

    BEP Marine BEP Pro Installer Double Insulated Stud - 10mm [IST-10MM-2S]

    10mm Double Instulated StudThe Pro Installer insulated studs are a smart choice for marine installers. An increased stainless steel stud length allows up to three cable lugs to be connected, saving space, while the snap-out side skirts allow for additional cable entry. Saves space and adds design flexibility Insert molded cable lugs and fiber-reinforced base provide strength and durability Power tapping plate converts from a single stud to add up to four connection points for smaller cables while leaving access for larger cables Innovative, clear covers insulate and protect on three sides and offer easy access WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Brochure (pdf)

    Read more

    $29.61 $19.99

  • Sale -$8.39 BEP 2-Position SPST Push-Pull Switch - OFF/ON (two circuit) [1001303]

    BEP Marine BEP 2-Position SPST Push-Pull Switch - OFF/ON (two circuit) [1001303]

    2-Position SPST Push-Pull Switch - OFF/ON (two-circuit)Single pole, single throw switch turns one circuit on and off. Heavy-duty, noncorrosive construction with moisture-repellent insulators. Brass case, stem, terminals and mounting hardware. All knobs are screw-on type.Features: Nominal voltage is 6-36V DC Rated for 10A at 12V DC #8-32 screw terminals Fits panels up to 1" thick Same as Cole Hersee part number M-527 WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Throw/Pole: SPST Color: Chrome Action: On/Off Box Dimensions: 2"H x 3"W x 5"L WT: 0.2 lbs UPC: 870216045979

    Read more

    $27.38 $18.99

  • Sale -$6.00 BEP Pro Installer Link Joiner 5-Way [779-LBJ-5]

    BEP Marine BEP Pro Installer Link Joiner 5-Way [779-LBJ-5]

    Pro Installer Link Joiner 5-WayThis tin-plated bus bar can be used to link 5 adjacent DC products together.  The rating varies from 400-650 Amps depending on how this busbar is wired, see drawing for details.  Made from tin-plated high-purity copper, this bar is intended for use with the BEP Pro Installer system but it has universal applications anywhere a high amperage link bus is needed. Pro Installer link bars provide the fastest and most economical way of connecting the Pro Installer line of products to save space and allow for the most compact installations. The common interconnection height of Pro Installer components allows link bars to quickly and easily convert a group of different products into a functional cluster. Links can be doubled to accommodate higher loads.Features: Tin-plated high-purity copper for maximum conductivity and corrosion resistance 650 AMP continuous rating between two adjacent positions 400 AMP continuous rating across all positions Bars can be doubled up for additional amperage This link bar is intended to be used with 3/8" studs Hole spacing is 2"  Overall dimensions 8.8" x 1" WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

    Read more

    $23.99 $17.99

  • Sale -$9.27 BEP 2-Position SPST Push-Pull Switch w/Wire Leads - OFF/ON [1001306]

    View options

    BEP Marine BEP 2-Position SPST Push-Pull Switch w/Wire Leads - OFF/ON [1001306]

    2-Position SPST Push-Pull Switch w/Wire Leads - OFF/ONSingle pole, single throw switch turns one circuit on and off. Heavy-duty, noncorrosive construction with moisture-repellent insulators. Brass case, stem, terminals and mounting hardware. Plasticized body helps seal out moisture and dirt. All knobs are screw-on type.Features: Nominal voltage is 6-36V DC Rated for 10A at 12V DC Two 8" 16 AWG wire leads for terminals Fits panels up to 5/8" thick Same as Cole Hersee part number M-606 WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Color: Chrome Action: On/Off Throw/Pole: SPST Box Dimensions: 2"H x 3"W x 5"L WT: 0.2 lbs UPC: 870216046006

    Read more

    $27.26 $17.99

    View options

  • Sale -$9.28 BEP ATC Bus bar - 6 Way - 5mm Input Stud [80-712-0039-00]

    BEP Marine BEP ATC Bus bar - 6 Way - 5mm Input Stud [80-712-0039-00]

    ATC Six Way Bus Bar with 5mm Input StudThe ATC Negative Bus uses the BEP Contour lock system to allow it to be joined to the ATC fuse holder. This keeps wiring tidy and conveniently located. Current Rating: 100Amps.WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

    Read more

    $27.27 $17.99

  • Sale -$8.65 BEP SPST Rocker Switch - 1-LED w/4-Colored Covers - 12V/24V - ON/OFF [1001716]

    View options

    BEP Marine BEP SPST Rocker Switch - 1-LED w/4-Colored Covers - 12V/24V - ON/OFF [1001716]

    SPST Rocker Switch - 1-LED w/4-Colored Covers - 12V/24V - ON/OFFSingle pole, single throw switch turns one circuit on and off.Features: Includes one white LED and 4 LED covers; Red, Green, Amber and Clear Nominal voltage is 12V DC Rated for 25A at 12V DC Three 1/4" blade terminals Snap-in mounting to fit panel hole 1.45" x .83" into panels .093" to .187" thick Same as Cole Hersee part number 58328-100 WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Throw/Pole: SPST Color: Black Action: On/Off Box Dimensions: 2"H x 3"W x 5"L WT: 0.1 lbs UPC: 870216046372

    Read more

    $25.64 $16.99

    View options

  • Sale -$8.74 BEP 2-Position SPST PVC Coated Push Button Switch - OFF/(ON) [1001506]

    BEP Marine BEP 2-Position SPST PVC Coated Push Button Switch - OFF/(ON) [1001506]

    2-Position SPST PVC Coated Push Button Switch - OFF/(ON)Single pole, single throw switch turns one circuit on and off. Can be used for any single circuit requiring an On-Off style switch. PVC coated to help protect against moisture and dirt.Features: Replacement cap 1001501 Nominal voltage is 6-36V DC Rated for 10A at 12V DC Two 8" 16 AWG wire leads Same as Cole Hersee part number M-608 WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Throw/Pole: SPST Color: Black Action: (On)/Off Box Dimensions: 2"H x 3"W x 5"L WT: 0.4 lbs UPC: 870216046099

    Read more

    $25.73 $16.99

  • Sale -$7.01 BEP 2-Position SPST Heavy-Duty Push Button Switch - OFF/(ON) - 35 Amp [1001504]

    BEP Marine BEP 2-Position SPST Heavy-Duty Push Button Switch - OFF/(ON) - 35 Amp [1001504]

    2-Position SPST Heavy-Duty Push Button Switch - OFF/(ON) - 35 AmpSingle pole, single throw switch turns one circuit on and off. Can be used for intermittent windshield wiper or horn control.Features: Replacement cap 1001502 Nominal voltage is 6-36V DC Rated for 35A at 12V DC #8-32 screw terminals Fits panels up to 1" thick Same as Cole Hersee part number M-490 WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Action: (On)/Off Color: Chrome Throw/Pole: SPST Box Dimensions: 2"H x 3"W x 5"L WT: 0.2 lbs UPC: 870216046075

    Read more

    $24.00 $16.99

  • Sale -$7.94 BEP Contour 1100 Series Double Interior Switch - On/Off - Black [1101-BK]

    BEP Marine BEP Contour 1100 Series Double Interior Switch - On/Off - Black [1101-BK]

    Contour 1100 Series Double Interior Switch - On/Off - BlackThe Contour Interior Switch can be either surface or recess mounted. The interior series is supplied standard with a three terminal on/on switch which can be used for on/off circuits or two-way light installations. For applications such as shower drain pumps or electric toilets, momentary switches can be interchanged into the switch plate. Switches can be turned 90 degrees for horizontal mounting, and are current rated at 10A DC. All switches include a label sheet.WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Color: Black Action: On/Off Box Dimensions: 2"H x 2"W x 6"L WT: 0.1 lbs UPC: 870216005706

    Read more

    $24.93 $16.99

  • Sale -$6.23 BEP Battery Switch Label Sheet [713]

    BEP Marine BEP Battery Switch Label Sheet [713]

    701 Contour Battery Master SwitchLabel Set (12 Labels) for non-standard labeling.

    Read more

    $22.22 $15.99

  • Sale -$7.15 BEP SPDT Sealed Dipped Toggle Switch - ON/OFF/ON [1002011]

    View options

    BEP Marine BEP SPDT Sealed Dipped Toggle Switch - ON/OFF/ON [1002011]

    SPDT Sealed Toggle Switch - ON/OFF/ONSingle pole, double throw toggle switch turns one of two circuits on and off. Common applications include combining nav lights and anchor light with independent bulbs. Completely sealed switches built to stand up to the most extreme conditions. Engineered to IP67 specifications utilizing a double o-ring within a bushing at the toggle and a full epoxy seal at the back.Features: Nominal voltage is 12V/24V DC Rated for 25A at 12V DC, 15A at 24V DC 8" 16 AWG wire lead terminals Mounting stem 15/32" fits panels up to 1/4" thick Same as Cole Hersee part number 55036-14 WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Action: On/Off/On Throw/Pole: SPDT Box Dimensions: 2"H x 3"W x 5"L WT: 0.2 lbs UPC: 870216046709

    Read more

    $23.14 $15.99

    View options

  • Sale -$7.49 BEP SPDT Sealed Toggle Switch - ON/ON [1002008]

    BEP Marine BEP SPDT Sealed Toggle Switch - ON/ON [1002008]

    SPDT Sealed Toggle Switch - ON/ONSingle pole, double throw toggle switch turns one of two circuits on. Common applications include hallway style light switching or switching between natteries, shunts, or current transformers for multiple measurements in a single meter. Completely sealed switches built to stand up to the most extreme conditions. Engineered to IP67 specifications utilizing a double o-ring within a bushing at the toggle and a full epoxy seal at the back.Features: Nominal voltage is 12V/24V DC Rated for 25A at 12V DC, 15A at 24V DC 10" 14 AWG wire lead terminals Mounting stem 15/32" fits panels up to 1/8" thick Same as Cole Hersee part number 55025-03 WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Action: On/On Color: Chrome Box Dimensions: 2"H x 3"W x 5"L WT: 0.2 lbs UPC: 870216046679

    Read more

    $23.48 $15.99

  • Sale -$6.90 BEP Kill Switch Lanyard [1001601]

    BEP Marine BEP Kill Switch Lanyard [1001601]

    Kill Switch & LanyardAdd safety to older boats easily. In an emergency, a quick pull on the lanyard stops the engine, preventing accidental runaway. Includes switch, lanyard, and disconnect clip. Contact engine manufacturer for specific installation instructions.Features: Nominal voltage is 12V/24V DC Rated for 10A at 12V DC 7" 16 AWG wire leads for terminals IP65 Same as Cole Hersee part number M-597 WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

    Read more

    $22.89 $15.99

  • Sale -$5.83 BEP Connection Cable Bare End - 300 mm [80-511-0031-00]

    BEP Marine BEP Connection Cable Bare End - 300 mm [80-511-0031-00]

    Connection Cable Bare End - 300 mmThis 300 mm (12") cable simply pushes onto the back of the push button switches and features 0.8 mm² / 18g cables for switch and backlight connections that comply with ISO/ABYC. Other end is stripped wire for easy connection.WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

    Read more

    $20.82 $14.99

  • Sale -$5.00 BEP Pro Installer 4-Way Link Bar/Joiner [779-LBJ-4]

    BEP Marine BEP Pro Installer 4-Way Link Bar/Joiner [779-LBJ-4]

    Pro Installer Link Joinder 4-WayThis tin-plated bus bar can be used to link 4 adjacent DC products together.  The rating varies from 450-650 Amps depending on how this busbar is wired.  Made from tin-plated high-purity copper, this bar is intended for use with the BEP Pro Installer system but it has universal applications anywhere a high amperage link bus is needed. Pro Installer link bars provide the fastest and most economical way of connecting the Pro Installer line of products to save space and allow for the most compact installations. The common interconnection height of Pro Installer components allows link bars to quickly and easily convert a group of different products into a functional cluster. Links can be doubled to accommodate higher loads.Features: Tin-plated high-purity copper for maximum conductivity and corrosion resistance 650 AMP continuous rating between two adjacent positions 450 AMP continuous rating across all positions This link bar is intended to be used with 3/8" studs Hole spacing is 2"  Overall dimensions 6.9" x 1" WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

    Read more

    $18.99 $13.99

  • Sale -$5.02 BEP SPST PVC Coated Toggle Switch - OFF/(ON) [1002003]

    BEP Marine BEP SPST PVC Coated Toggle Switch - OFF/(ON) [1002003]

    SPST PVC Coated Toggle Switch - OFF/(ON)Single pole, single throw toggle switch turns one circuit on and off. Common applications include intermittent horn or windshield wiper control. This toggle switch is PVC coated.Features: Nominal voltage is 12V/24V DC Rated for 25A at 12V DC, 15A at 24V DC 8" 16 AWG wire lead terminals Mounting stem 15/32" fits panels up to 1/4" thick Same as Cole Hersee part number 55020-04 WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Action: (On)/Off Throw/Pole: SPST Box Dimensions: 2"H x 3"W x 5"L WT: 0.1 lbs UPC: 870216046624

    Read more

    $19.01 $13.99

You have seen 96 out of 168 products

Show more products

BEP
Footer image

© 2025 REBELLION MARINE, Powered by Shopify

    Login

    Forgot your password?

    Don't have an account yet?
    Create account

    Add address