FREE SHIPPING ON ORDERS OVER $100.0 Dollars!

Show previous products

  • Sale -$60.54 Blue Sea 8029 AC Main +1 Position Breaker Panel - White Switches [8029]

    Blue Sea Systems Blue Sea 8029 AC Main +1 Position Breaker Panel - White Switches [8029]

    8029 AC Main +1 Position Breaker Panel - White SwitchesFeatures: Red reverse polarity indicating LED All hot, neutral and safety ground buses installed, fully pre-wired All circuit label positions are backlit on standard panels - No kit required "ON" indicating LEDs installed in all circuit positions Specifications: Positions: 1 Nominal Voltage: 120v AC Height: 3.75" Width: 5.25" Included: (2) 8034 LED - 120v AC Green (1) 8066 LED - 120v AC Red (1) 7238 A-Series White Toggle Circuit Breaker - Double Pole 30A (Main) WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: AC/DC: AC Max Breaker Quantity: 1 Voltage: 120v Box Dimensions: 5"H x 7"W x 9"L WT: 1.1 lbs UPC: 632085080297

    Read more

    $185.53 $124.99

  • Blue Sea Automatic Timer Disconnect 12vDC

    View options

    Blue Sea Systems Blue Sea Automatic Timer Disconnect 12vDC

    Blue Sea SystemsModel: 7615-BSS Timer Disconnect - 12V signal triggers relay to connect battery power to devices Timer Disconnect - When signal is removed the timer is activated and will disconnect devices after a preset time Timer Disconnect - Timer ranges from 15 minutes to 4 hours Low Voltage Disconnect -12V signal triggers relay to connect battery power to devices. After 12V signal is removed, device senses low battery voltage and automatically disconnects devices. Low voltage setting can be used in conjunction with Timer Disconnect. Low voltage will disconnect devices prior to preset time to preserve battery power Specifications Nominal Voltage 12V DC Amperage Operating Current 175mA (closed) 4mA (open) Terminal Stud Torque 140 in-lb (15.82 Nm) Continuous Rating 120A Intermittent Rating 210A (5 Min) Cable Size to Meet Ratings 1 AWG (50mm ) Charge Sense Connect 13.0V (3 sec) Charge Sense Disconnect 12.75V (10 sec) Disconnect Time 5 sec, 15 min, 30 min, 1 hr, 1.5 hr, 2hr, or 4hr Input Voltage Range 9.5-16V Low Voltage Disconnect 11.0V (10 sec) 11.5V (10 sec) 12.0V (10 sec) Maximum Cable Size 1/0 AWG (50mm ) Stud Material Tinned Copper Terminal Ring Diameter Clearance 1.12in (28.45 mm) Terminal Stud Size 3/8"-16 (M10) Over Voltage Lockout 16.0V (5 sec)

    Read more

    $123.01

    View options

  • Blue Sea Weather Deck Panel 12v 6 Circuit Breaker Panel

    Blue Sea Systems Blue Sea Weather Deck Panel 12v 6 Circuit Breaker Panel

    Blue Sea Systems Weather Deck 12V DC Waterproof Circuit Breaker Panel - Gray 6 PositionsModel: 4376-BSS Rated IP67-temporary immersion for 30 minutes Designed for flybridge and open cockpit applications Independent label backlighting allows switching and dimming Compatible with all Blue Sea Systems Digital Dimmers Each panel can be mounted in four different orientations Green LEDs aid low-light readability. All labels will be lit when the panel is powered, regardless of individual switch position. Specifications Weatherproof Waterproof Positions 6 Nominal Voltage 12V DC 24V DC Circuit Protection Circuit Breaker Maximum Amperage 15A @ 12V DC (per circuit) 9A @ 24V DC (per circuit) Panel Cumulative Rating 45A Backlit Label Green LED Backlighting Amperage 10mA /Illuminated Circuit Backlighting Voltage 12 or 24V DC Material Reinforced Polycarbonate Dimensions 6.00" H x 4.25" W x 3.5"D

    Read more

    $122.64

  • Sale -$42.74 Blue Sea 7615 ATD Automatic Timer Disconnect [7615] Blue Sea 7615 ATD Automatic Timer Disconnect [7615]

    Blue Sea Systems Blue Sea 7615 ATD Automatic Timer Disconnect [7615]

    ATD Automatic Timer DisconnectAdjustable time or voltage based battery disconnect automatically shuts off devices to preserve battery power 12V signal triggers relay to connect battery power to devices. When signal is removed the timer is activated and will disconnect devices after a preset time Disconnect can be triggered based on time, low voltage, or removal of 12V signal Low voltage will disconnect if time hasn_t been reached to preserve battery power Time and voltage options can be turned off to allow 12V signal based disconnect Clip-on cover insulates terminal connections One-piece stainless flange nuts ensure safe and secure connections Integrated LED indicates status Specifications: Nominal Voltage:12V DC Amperage Operating Current: 175mA(Combine / 15mA(Open) Continuous Rating:120A Intermittent Duty: 210 Terminal Stud Size: 3/8"-16 (M10) Time Range: 15min-4hrs WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Owner's Manual (pdf)

    Read more

    $164.73 $121.99

  • Sale -$25.68 Blue Sea 7290 C-Series Triple Pole Circuit Breaker - 100A [7290]

    View options

    Blue Sea Systems Blue Sea 7290 C-Series Triple Pole Circuit Breaker - 100A [7290]

    C-Series TogglePN: 7290Poles: 3Color: WhiteAmperage: 100AFeatures: 5,000 Ampere interrupt capacity to meet ABYC requirements for 120/240 Volt 50 Ampere main protection Double pole used as 120 volt AC main circuit breaker to switch hot to neutral Triple pole used as 240 volt AC main circuit breaker to switch lines (hot) and neutral Double and triple pole circuit breakers will trip all poles will trip if any one pole trips "Trip Free" design cannot be held "ON" during fault current condition WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Amperage: 100a Box Dimensions: 4"H x 5"W x 5"L WT: 0.9 lbs UPC: 632085072902

    Read more

    $147.67 $121.99

    View options

  • Sale -$25.68 Blue Sea 7287 C-Series Triple Pole Circuit Breaker - 50A [7287]

    View options

    Blue Sea Systems Blue Sea 7287 C-Series Triple Pole Circuit Breaker - 50A [7287]

    C-Series TogglePN: 7287Poles: 3Color: WhiteAmperage: 50AFeatures: 5,000 Ampere interrupt capacity to meet ABYC requirements for 120/240 Volt 50 Ampere main protection Double pole used as 120 volt AC main circuit breaker to switch hot to neutral Triple pole used as 240 volt AC main circuit breaker to switch lines (hot) and neutral Double and triple pole circuit breakers will trip all poles will trip if any one pole trips "Trip Free" design cannot be held "ON" during fault current condition WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Amperage: 50a Box Dimensions: 2"H x 4"W x 5"L WT: 0.3 lbs UPC: 632085072872

    Read more

    $147.67 $121.99

    View options

  • Sale -$60.11 Blue Sea 4376 WeatherDeck Water Resistant Circuit Breaker Panel - 6 Position - Grey [4376]

    Blue Sea Systems Blue Sea 4376 WeatherDeck Water Resistant Circuit Breaker Panel - 6 Position - Grey [4376]

    WeatherDeck™ Water Resistant Circuit Breaker PanelPN: 4376Color: GrayFeatures: Rated IP67-temporary immersion for 30 minutes Designed for flybridge and open cockpit applications Independent label backlighting allows switching and dimming Compatible with all Blue Sea Systems Digital Dimmers Each panel can be mounted in four different orientations Green LEDs aid low-light readability. All labels will be lit when the panel is powered, regardless of individual switch position. Specifications: Weatherproof: Waterproof Positions: 6 Nominal Voltage: 12v / 24v DC Circuit Protection: Circuit Breaker Maximum Amperage: 15A @ 12v DC (per circuit) / 9A @ 24v DC (per circuit) Panel Cumulative Rating: 45A Backlit Label: Green LED Backlighting Amperage: 10mA/Illuminated Circuit Backlighting Voltage: 12 or 24v DC Height: 6.0" Width: 4.25" Depth: 3.5" Included: (6) 4135 Push Button Reset Only Circuit Breaker Boot - Clear (6) 4138 WeatherDeck® Toggle Switch Boot - Black (6) 4150 WeatherDeck® Toggle Switch SPST - ON-OFF (1) 4215 Waterproof DC Label Kit - 30 Black Square Labels V1 (6) 7056 Push Button Reset Only Quick Connect Circuit Breaker - 15 Amps WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Waterproof: Waterproof Voltage: 12v AC/DC: DC Max Breaker Quantity: 6 Box Dimensions: 4"H x 6"W x 9"L WT: 1.4 lbs UPC: 632085043766 Quick Guide (pdf)

    Read more

    $182.10 $121.99

  • Sale -$59.57 Blue Sea 7748 SafetyHub 150 Fuse Box [7748] Blue Sea 7748 SafetyHub 150 Fuse Box [7748]

    Blue Sea Systems Blue Sea 7748 SafetyHub 150 Fuse Box [7748]

    SafetyHub 150 Fuse BlockThe SafetyHub 150 is an ignition protected fuse block with screw termination. It is safe for use on gasoline powered boats, reduces wiring connections, and consolidates upt to ten fused circuits. It can be used for Main or Branch DC power distribution. Four 30A-200A MIDI/AMI fuses ideal for high-amp circuits including panel feeds, windlasses, and stereo amplifiers Six 1A-30A ATO/ATC fuses ideal for low-amp circuits including bilge pumps, electronics, and lights Sealed cover protects fuses from the harsh marine environment: IP66 rating - protected against powerful water jets Negative bus provides common location for negative collection Circuit identification label with write-on capability Fuse puller easily removes ATO/ATC fuses Cover provides storage space for two spare ATO/ATC fuses and two spare MIDI/AMI fuses NYPATCH coated MIDI/AMI fuse screws resist loosening over time Ignition protected fusing meets Coast Guard and ABYC requirements for installation on gasoline or diesel powered boats Fuses sold separatelyWARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Fuse Type: MIDI/AMI Type: Fuse Blocks Box Dimensions: 3"H x 9"W x 12"L WT: 2 lbs UPC: 632085077488 Brochure (pdf)

    Read more

    $178.56 $118.99

  • Sale -$73.88 Blue Sea 7476 C - Series Flat Circuit Breaker, Single and Double Pole - 200 Amp [7476]

    Blue Sea Systems Blue Sea 7476 C - Series Flat Circuit Breaker, Single and Double Pole - 200 Amp [7476]

    C - Series Flat Circuit Breaker, Single and Double PolePN:   7476Amperage:   200 AmpFeatures: Color actuator indicates "OFF" position "Trip Free" design cannot be held "ON" during fault current condition Flat actuator protects against accidental switching Specifications    Circuit Breaker Type Magnetic Hydraulic - Trip Free Maximum Voltage 80 Volts DC Rated Switch Cycles 10,000@rated amperage and voltage WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Amperage: 200a Box Dimensions: 4"H x 5"W x 5"L WT: 1 lbs UPC: 632085074760

    Read more

    $191.87 $117.99

  • Sale -$73.88 Blue Sea 7475 C-Series Flat Rocker Circuit Breakers, Single and Double Pole - 150 Amp [7475]

    View options

    Blue Sea Systems Blue Sea 7475 C-Series Flat Rocker Circuit Breakers, Single and Double Pole - 150 Amp [7475]

    C - Series Flat Circuit Breaker, Single and Double PolePN:   7475Amperage:   150 AmpFeatures: Color actuator indicates "OFF" position "Trip Free" design cannot be held "ON" during fault current condition Flat actuator protects against accidental switching Specifications    Circuit Breaker Type Magnetic Hydraulic - Trip Free Maximum Voltage 80 Volts DC Rated Switch Cycles 10,000@rated amperage and voltage WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Amperage: 150a Box Dimensions: 4"H x 5"W x 5"L WT: 0.95 lbs UPC: 632085074753

    Read more

    $191.87 $117.99

    View options

  • Sale -$55.91 Blue Sea 1522 360 Panel Dual Bilge Pump Control [1522]

    Blue Sea Systems Blue Sea 1522 360 Panel Dual Bilge Pump Control [1522]

    360 Panel Dual Bilge Pump ControlControls two bilge pumpsRestricted-off circuit breakers and manual override switches On-indicating LED indicates power is available at the bilge pump float switch Restricted-off circuit breakers provide 24-hour circuit protection to the bilge pump float switch Manual Override switch with On-indicating LED provides visual indication pump is running; also illuminates when pump is running as a result of float switch operation Specifications: Nominal Voltage:t12V DC Height:t4.75" (120.65mm) Width:t4.88" (123.95mm) Includes:(2) - 7427 - A-Series Restricted Off Flat Rocker Circuit Breaker - Single Pole 10A(2) - 7480 - Rocker Switch SPST - ON-OFFWARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: AC/DC: DC Box Dimensions: 5"H x 7"W x 9"L WT: 1.3 lbs UPC: 632085015220 Quick Guide (pdf)

    Read more

    $172.90 $116.99

  • Blue Sea Weather Deck Panel 12v 6 Gang Fuse Panel

    Blue Sea Systems Blue Sea Weather Deck Panel 12v 6 Gang Fuse Panel

    Blue Sea Systems Weather Deck 12V DC Waterproof Fuse Panel - Gray 6 PositionsModel: 4306-BSS Panel front rated IP67 when properly mounted with watertight mounting gasket IP67 — protected against immersion up to 1 meter for 30 minutes Designed for flybridge and open cockpit applications Independent label backlighting circuit for remote switching and dimming Available in 2, 4, 6, and 8 circuit models Each panel can be mounted in four different orientations Integrated ATO/ATC fuse based circuit protection Bicolored LEDs illuminate circuit labels to quickly identify OFF (Red), ON (Green), or Blown (No Color) circuits. No lights in any position likely indicate there is no power to the panel. Specifications Weatherproof Waterproof Positions 6 Nominal Voltage 12vDC Circuit Protection Fuse Maximum Amperage 15A @ 12V DC (per circuit) Panel Cumulative Rating 90A Backlit Label Bicolored LED Backlighting Amperage 10mA /Illuminated Circuit Backlighting Voltage 12V DC Material Reinforced Polycarbonate Dimensions H x W x D 6.0in x 3.88in x 2.50in

    Read more

    $113.34

  • Sale -$54.72 Blue Sea 4306 WeatherDeck Water Resistant Fuse Panel - 6 Position - Grey [4306]

    Blue Sea Systems Blue Sea 4306 WeatherDeck Water Resistant Fuse Panel - 6 Position - Grey [4306]

    WeatherDeck™ Water Resistant Fuse PanelPN: 4306Color: GrayFeatures: Panel front rated IP67 when properly mounted with watertight mounting gasket IP67 – protected against immersion up to 1 meter for 30 minutes Designed for flybridge and open cockpit applications Independent label back lighting circuit for remote switching and dimming Each panel can be mounted in four different orientations Integrated ATO/ATC fuse based circuit protection Bicolored LEDs illuminate circuit labels to quickly identify OFF (Red), ON (Green), or Blown (No Color) circuits. No lights in any position likely indicate there is no power to the panel. Specifications: Weatherproof: Waterproof Positions: 6 Nominal Voltage: 12v DC Circuit Protection: Fuse Maximum Amperage: 15A @ 12v DC (per circuit) Panel Cumulative Rating: 90A Backlit Label: Bicolored LED Backlighting Amperage: 10mA/illuminated Circuit Backlighting Voltage: 12v DC Height: 6.0" Width: 3.88" Depth: 2.5" Included: (6) 4138 WeatherDeck® Toggle Switch Boot - Black (6) 4150 WeatherDeck® Toggle Switch SPST - ON-OFF (1) 4215 Waterproof DC Label Kit - 30 Black Square Labels V1 (6) 5242 ATO/ATC Fuse - 15 Amp WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Waterproof: Waterproof Voltage: 12v AC/DC: DC Max Breaker Quantity: 6 Box Dimensions: 5"H x 6"W x 9"L WT: 1.5 lbs UPC: 632085043063 Quick Guide (pdf)

    Read more

    $167.71 $112.99

  • Sale -$54.68 Blue Sea 8262 Waterproof Panel 4 Position - Slate Grey [8262]

    Blue Sea Systems Blue Sea 8262 Waterproof Panel 4 Position - Slate Grey [8262]

    8262 Waterproof Panel 4 Position - Slate GreyFeatures: Will withstand the water exposures normally encountered in above deck applications: salt spray, rain, hose washdowns, momentary immersions Designed for flybridge and open cockpit applications ON-OFF Contura Switches ON indicating LEDs embedded in switches Watertight mounting gasket included Countersunk mounting holes throughout Two-part polyurethane slate gray finish Industry standard height and width Mil-Spec chemical treatment via immersion to protect every surface detail from corrosion Completely wired and ready to install Specifications: Weatherproof: Water Resistant Positions: 4 Nominal Voltage: 12v / 24v Panel Cumulative Rating: 45A Switch Rating: 20A @ 12v DC / 15A @ 24v DC Height: 3.75" Width: 5.25" Depth: 3" Included: (4) 5021 Panel Mount AGC/MDL Fuse Holder (1) 8214 Black 60 Label Set (4) 8230 Contura Switch SPST Gray - Off-On WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Waterproof: Resistant AC/DC: DC Max Breaker Quantity: 4 Voltage: 12/24v Box Dimensions: 5"H x 7"W x 9"L WT: 0.8 lbs UPC: 632085082628 Owner's Manual (pdf)

    Read more

    $166.67 $111.99

  • Blue Sea LED Remote For P12 Battery Chargers

    Blue Sea Systems Blue Sea LED Remote For P12 Battery Chargers

    Blue Sea LED Remote for P12 ChargersModel: 7520-BSS Charging: Quick check confirms charging Charge Stage: Displays charging stage Equalize: Indicates Equalization mode Fan Mode: Indicates internal fan mode Charge Output: Indicates the output current of each battery Alert: Provides alert status for quick diagnosis Fan: User adjustable settings (Off, Low, or High)c Dim/Alarm: LED brightness and alarm silence Output: User adjustable to lower AC current draw Standby: Puts charger in standby mode What's in the Box: Remote (4) #6 x 1" pan-head sheet metal screws Mounting Gasket 25 ft (7.6 m) Cat5e Cable Dielectric Grease:

    Read more

    $111.88

  • Blue Sea Add-A-Battery Mini

    Blue Sea Systems Blue Sea Add-A-Battery Mini

    Blue Sea Mini Add-A-Battery Kit- 65AModel: 7649-BSS Simplifies switching Isolates engine and house circuits Combines batteries for emergency starting Tin-plated copper studs for maximum conductivity and corrosion resistance Automatically combines batteries during charging The ADD-A-BATTERY is as simple to operate as an ON-OFF switch, yet effectively manages the switching and charging of two batteries from a single charge sourceThe Add-A-Battery includes a Dual Circuit Plus™ Battery Switch and an Automatic Charging Relay. These components simplify switching and automate charging, so that all you have to do is turn the battery switch ON when you arrive and OFF when you leave.What's in the Box: 6011 m-Series Switch 7601 m-Series ACR

    Read more

    $111.78

  • Sale -$24.55 Blue Sea 7520 P12 LED Remote f/Battery Chargers [7520]

    Blue Sea Systems Blue Sea 7520 P12 LED Remote f/Battery Chargers [7520]

    P12 Battery Charger LED RemoteLED Indicators Charging LED- Quick check for green light confirms charging Charge Stage- Displays charging stage Equalize LED- Indicates the charger is currently in equalization mode Fan Mode- Indicates charger's internal fan mode Charge Output- Displays the percentage of output current for each battery. Will also indicate maximum output setting when maximum output is adjusted to accommodate for AC source limitations Alert- Icon LEDs provide warning and alert status for quick diagnostics Four Control Buttons Fan- User adjustable settings Dim/ Alarm- Provides adjustment to brightness of LEDs on display as well as Silence function for alarms Output- User adjustable charger output when AC source limitations exist that require lowering the AC current draw Power- Places P12 Battery Charger into standby mode WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Quick Guide (pdf)Owner's Manual (pdf)

    Read more

    $135.54 $110.99

  • Blue Sea Water-Resistant 12V 15A Circuit Accessory Panel Socket, 2-Dual USB, Volt Meter

    Blue Sea Systems Blue Sea Water-Resistant 12V 15A Circuit Accessory Panel Socket, 2-Dual USB, Volt Meter

    Blue Sea Systems Water-Resistant Accessory Panel - 12V Socket, 2x 2.1A Dual USB Chargers, Mini VoltmeterModel: 4368-BSS Pre-wired harness included in all panels for easy installation Silicon breaker boots and gasket protects against water ingress Illuminated Carling Technologies 15A circuit breaker switch allows the ability to shut off panel preventing parasitic draw Polycarbonate/ABS panel face is UV-stabilized, flame retardant, and will not corrode 12V DC only Specifications Positions 1 Nominal Voltage 12V DC Dimensions 2.25"H x 8.29"W x 2.53"D

    Read more

    $110.76

  • Sale -$54.39 Blue Sea 4368 Water Resistant USB Accessory Panel - 12V Socket, 2x 2.1A Dual USB Chargers, Mini Voltmeter [4368]

    Blue Sea Systems Blue Sea 4368 Water Resistant USB Accessory Panel - 12V Socket, 2x 2.1A Dual USB Chargers, Mini Voltmeter [4368]

    4368 Water Resistant USB Accessory Panel - 12V Socket, 2x 2.1A Dual USB Chargers, Mini VoltmeterEasy to install accessory panels include a 15A circuit breaker switch and pre-wired harness.  Panels offer customizable 12V charging and monitoring options.Features: Pre-wired harness included in all panels for easy installation Silicon breaker boots and gasket protects against water ingress Illuminated Carling Technologies 15A circuit breaker switch allows the ability to shut off panel preventing parasitic draw Polycarbonate/ABS panel face is UV-stabilized, flame retardant, and will not corrode 12V DC only Specifications: Positions: 1 Nominal Voltage: 12V DC

    Read more

    $164.38 $109.99

  • Sale -$58.39 Blue Sea 7649 Mini Add-A-Battery Kit [7649]

    Blue Sea Systems Blue Sea 7649 Mini Add-A-Battery Kit [7649]

    7649 Mini Add-A-BatteryWhat does the Mini Add-A-Battery do?Adding a second battery prevents getting stranded with a dead battery by isolating the start battery from the house loads that can quickly discharge a battery. The Mini Add-A-Battery offers a compact, simple way to control the switching with the m-Series Dual Circuit PlusT Battery Switch and automatically share a single source of charging between two batteries with the Mini ACR Automatic Charging Relay. WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Continuous Amperage: 65a Box Dimensions: 4"H x 8"W x 12"L WT: 1.65 lbs UPC: 632085076498 Quick Guide (pdf)Owner's Manual (pdf)

    Read more

    $166.38 $107.99

  • Sale -$52.72 Blue Sea 7649 Mini Add-A-Battery Kit - Boxed Packaging [7649003]

    Blue Sea Systems Blue Sea 7649 Mini Add-A-Battery Kit - Boxed Packaging [7649003]

    7649 Mini Add-A-Battery Kit - Boxed PackagingWhat does the Mini Add-A-Battery do?Adding a second battery prevents getting stranded with a dead battery by isolating the start battery from the house loads that can quickly discharge a battery. The Mini Add-A-Battery offers a compact, simple way to control the switching with the m-Series Dual Circuit PlusT Battery Switch and automatically share a single source of charging between two batteries with the Mini ACR Automatic Charging Relay.WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Continuous Amperage: 65a Box Dimensions: 4"H x 4"W x 7"L WT: 1.5 lbs UPC: 632085764937 Owner's Manual (pdf)

    Read more

    $159.71 $106.99

  • Blue Sea Tank Sender 32in Gas Only

    View options

    Blue Sea Systems Blue Sea Tank Sender 32in Gas Only

    Ble Sea Vessel Systems Monitor Tank Sender - Gasoline OnlyModel: 1811-BSS Accurate - used with the Vessel Systems Monitor VSM 422 PN 1800—can be precisely calibrated for each tank* Reliable - SSI Technologies, Inc. Fluid-Trac® is non-contacting eliminating any mechanical moving parts that can wear and cause intermittent or complete signal loss Digital filtering - Eliminates errors due to liquids sloshing in mobile tanks Limitations and considerations for mounting the ultrasonic tank senders: Senders are calibrated to the VSM 422 and M2 Meters and will not function with other monitorsSenders must be mounted 4" or greater distance from a tank side or baffleTank floor must not be slopedTanks must not be deeper than 32"Sender must be mounted perpendicular to the surface of the liquidThe sender negative connection should be connected as directly as possible to the main negative bus.Specifications Operating Current 40mA @ 12V45mA @ 24V Supply Voltage 10-32V DC Weight 0.25lb (0.11 kg)

    Read more

    $105.16

    View options

  • Blue Sea Tank Sender 32in Diesel, Water and Waste

    View options

    Blue Sea Systems Blue Sea Tank Sender 32in Diesel, Water and Waste

    Ble Sea Vessel Systems Monitor Tank Sender - Diesel, Water, WasteModel: 1810-BSS Accurate - used with the Vessel Systems Monitor VSM 422 PN 1800—can be precisely calibrated for each tank* Reliable - SSI Technologies, Inc. Fluid-Trac® is non-contacting eliminating any mechanical moving parts that can wear and cause intermittent or complete signal loss Digital filtering - Eliminates errors due to liquids sloshing in mobile tanks Limitations and considerations for mounting the ultrasonic tank senders: Senders are calibrated to the VSM 422 and M2 Meters and will not function with other monitorsSenders must be mounted 4" or greater distance from a tank side or baffleTank floor must not be slopedTanks must not be deeper than 32"Sender must be mounted perpendicular to the surface of the liquidThe sender negative connection should be connected as directly as possible to the main negative bus.Specifications Operating Current 40mA @ 12V45mA @ 24V Supply Voltage 10-32V DC Weight 0.25lb (0.11 kg)

    Read more

    $105.16

    View options

  • Sale -$51.46 Blue Sea 1810 VSM 422 Tank Sender Diesel, Water, or Waste Tank Level [1810]

    Blue Sea Systems Blue Sea 1810 VSM 422 Tank Sender Diesel, Water, or Waste Tank Level [1810]

    1810Features: Accurate - used with the Vessel Systems Monitor VSM 422 PN 1800 - can be precisely calibrated for each tank* Reliable - SSI Technologies, Inc. Fluid-Trac® is non-contacting eliminating any mechanical moving parts that can wear and cause intermittent or complete signal loss Digital filtering - Eliminates errors due to liquids sloshing in mobile tanks * Calibrated for use with Blue Sea Systems Vessel Systems Monitor VSM 422 only WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Owner's Manual (pdf)

    Read more

    $156.45 $104.99

  • Sale -$51.46 Blue Sea 1811 VSM 422 Tank Sender Gasoline Tank Level [1811]

    Blue Sea Systems Blue Sea 1811 VSM 422 Tank Sender Gasoline Tank Level [1811]

    1811Features: Accurate - used with the Vessel Systems Monitor VSM 422 PN 1800-can be precisely calibrated for each tank* Reliable - SSI Technologies, Inc. Fluid-Trac® is non-contacting eliminating any mechanical moving parts that can wear and cause intermittent or complete signal loss Digital filtering - Eliminates errors due to liquids sloshing in mobile tanks * Calibrated for use with Blue Sea Systems Vessel Systems Monitor VSM 422 only WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Owner's Manual (pdf)

    Read more

    $156.45 $104.99

  • Sale -$50.44 Blue Sea 8077 AC Main Only Toggle Circuit Breaker Panel [8077]

    Blue Sea Systems Blue Sea 8077 AC Main Only Toggle Circuit Breaker Panel [8077]

    8077 AC Main Only Toggle Circuit Breaker PanelFeatures: Red reverse polarity indicating LED Safety ground screw on panel back Combines switching and circuit protection into a single device "Trip Free" design cannot be held "ON" during fault current condition Specifications: Nominal Voltage: 120v AC Maximum Voltage: 277v AC / 65v DC Height: 3.75" Width: 2.63" Included: (1) 8034 LED - 120v AC Green (1) 8066 LED - 120v AC Red (1) 7238 A-Series White Toggle Circuit Breaker - Double Pole 30A (Main) WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: AC/DC: AC Max Breaker Quantity: 1 Voltage: 120v Box Dimensions: 3"H x 4"W x 7"L WT: 0.7 lbs UPC: 632085000004

    Read more

    $153.43 $102.99

  • Sale -$50.44 Blue Sea 8015 DC Analog Voltmeter w/Panel [8015] Blue Sea 8015 DC Analog Voltmeter w/Panel [8015]

    Blue Sea Systems Blue Sea 8015 DC Analog Voltmeter w/Panel [8015]

    8015 DC Analog Voltmeter with PanelFeatures: 8003 DC Analog Voltmeter 8-16 V DC 3 Position switch for multiple battery banks Voltmeter mounted in 0.125" Aluminum 5052 Alloy WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Owner's Manual (pdf)

    Read more

    $153.43 $102.99

  • Sale -$50.44 Blue Sea 8079 AC Main Only Circuit Breaker Panel - White Switches [8079]

    Blue Sea Systems Blue Sea 8079 AC Main Only Circuit Breaker Panel - White Switches [8079]

    8079 AC Main Only Circuit Breaker Panel - White SwitchesFeatures: Red reverse polarity indicating LED Safety ground screw on panel back Combines switching and circuit protection into a single device "Trip Free" design cannot be held "ON" during fault current condition Specifications: Nominal Voltage: 120v AC Maximum Voltage: 277v AC / 65v DC Height: 2.63" Width: 3.75" Weight: 0.51 lbs Includes (1) 8034 LED - 120v AC Green (1) 8066 LED - 120v AV Red (1) 7242 A-Series White Toggle Circuit Breaker - Double Pole 50A (Main) WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: AC/DC: AC Max Breaker Quantity: 1 Voltage: 120v Box Dimensions: 3"H x 4"W x 7"L WT: 0.5 lbs UPC: 632085080792 Owner's Manual (pdf)

    Read more

    $153.43 $102.99

  • Sale -$40.07 Blue Sea 8665 Contura 3 Bilge Pump Control Panel [8665]

    Blue Sea Systems Blue Sea 8665 Contura 3 Bilge Pump Control Panel [8665]

    8665 Contura 3 Bilge Pump Control PanelBlue Sea Systems water resistant 12/24 Volt DC Bilge Pump control panel with Contura rocker switch and fuse holder for fuses up to 20amp Features: Designed for 12 or 24V DC systems   ON - OFF - AUTO Contura Switch Watertight mounting gasket Fuse holders accept commonly available AGC and MDL glass fuses "ON” LED embedded in switch indicates the pump is running Completely wired and ready to install Specifications: Weatherproof - Water Resistant No. of Bilge Pumps - three (3) Nominal Voltage - 12/24V Panel Cumulative Rating - 45A Switch Rating: 20A @ 12V DC / 15A @ 24V DC Dimensions (H x W x D) - 3.75" x 5.25" x 3" In the Box: Panel Mount AGC/MDL Fuse Holder (P/N 5021) x three (3) Contura III Switch SPDT - On - OFF - (ON) (P/N 7944) x three (3) Black 60 Label Set (P/N 8214) *Sold as an Individual  Specifications: Action: on - off - auto Color: Black/Grey Throw/Pole: SPDT Box Dimensions: 4"H x 7"W x 9"L WT: 0.65 lbs UPC: 632085086657 Owner's Manual (pdf)

    Read more

    $141.06 $100.99

  • Sale -$47.59 Blue Sea 4374 WeatherDeck Water Resistant Circuit Breaker Panel - 4 Position - Grey [4374]

    Blue Sea Systems Blue Sea 4374 WeatherDeck Water Resistant Circuit Breaker Panel - 4 Position - Grey [4374]

    WeatherDeck™ Water Resistant Circuit Breaker PanelPN: 4374Color: GrayFeatures: Rated IP67-temporary immersion for 30 minutes Designed for flybridge and open cockpit applications Independent label backlighting allows switching and dimming Compatible with all Blue Sea Systems Digital Dimmers Each panel can be mounted in four different orientations Green LEDs aid low-light readability. All labels will be lit when the panel is powered, regardless of individual switch position. Specifications: Weatherproof: Waterproof Positions: 4 Nominal Voltage: 12v / 24v DC Circuit Protection: Circuit Breaker Maximum Amperage: 15A @ 12v DC (per circuit) / 9A @ 24v DC (per circuit) Panel Cumulative Rating: 45A Backlit Label: Green LED Backlighting Amperage: 10mA/Illuminated Circuit Backlighting Voltage: 12 or 24v DC Height: 4.3" Width: 4.25" Depth: 3.5" Included: (4) 4135 Push Button Reset Only Circuit Breaker Boot - Clear (4) 4138 WeatherDeck® Toggle Switch Boot - Black (4) 4150 WeatherDeck® Toggle Switch SPST - ON-OFF (1) 4215 Waterproof DC Label Kit - 30 Black Square Labels V1 (4) 7056 Push Button Reset Only Quick Connect Circuit Breaker - 15 Amps WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Waterproof: Waterproof Voltage: 12v AC/DC: DC Max Breaker Quantity: 4 Box Dimensions: 6"H x 6"W x 8"L WT: 1 lbs UPC: 632085043742 Quick Guide (pdf)

    Read more

    $146.58 $98.99

  • Blue Sea Weather Deck Panel 12v 4 Circuit Breaker Panel

    Blue Sea Systems Blue Sea Weather Deck Panel 12v 4 Circuit Breaker Panel

    Blue Sea Systems Weather Deck 12V DC Waterproof Circuit Breaker Panel - Gray 4 PositionsModel: 4374-BSS Rated IP67-temporary immersion for 30 minutes Designed for flybridge and open cockpit applications Independent label backlighting allows switching and dimming Compatible with all Blue Sea Systems Digital Dimmers Each panel can be mounted in four different orientations Green LEDs aid low-light readability. All labels will be lit when the panel is powered, regardless of individual switch position. Specifications Weatherproof Waterproof Positions 4 Nominal Voltage 12V DC 24V DC Circuit Protection Circuit Breaker Maximum Amperage 15A @ 12V DC (per circuit) 9A @ 24V DC (per circuit) Panel Cumulative Rating 45A Backlit Label Green LED Backlighting Amperage 10mA /Illuminated Circuit Backlighting Voltage 12 or 24V DC Material Reinforced Polycarbonate Dimensions 4.3" H x 4.25" W x 3.5"D

    Read more

    $98.90

  • Blue Sea BatteryLink Automatic Charging Relay 12/24vDC 120A

    Blue Sea Systems Blue Sea BatteryLink Automatic Charging Relay 12/24vDC 120A

    Blue Sea Systems BatteryLink™ Automatic Charging Relay - 12V/24V DC 120AModel: 7611-BSS 120 Amp continuous rating 12/24V DC auto ranging voltage input Senses charging on two battery banks Side and bottom knockouts for cable connections Clip-on cover insulates terminal connections 7/8" (22 mm) stud length to accept multiple cable terminals Integrated LED indicates ACR status 1/4" .032" male quick connect terminals for ground and optional features Largest battery bank cannot exceed Group 27 Automatically shares single source of charge with Auxiliary BatterySpecifications Nominal Voltage 12V DC 24V DC Auxiliary Battery Priority Yes Amperage Operating Current 175mA @ 12V (Combine) 115mA @ 24V (Combine) 15mA (Open) Continuous Rating 120A Intermittent Rating 210A (5 min) Maximum Cable Size 1/0 AWG Maximum Torque 140 in-lb (15.82 Nm) Stud Material Tinned Copper Terminal Stud Size 3/8" - 16 (M10)

    Read more

    $98.50

  • Blue Sea SI-ACR Automatic Charging Relay 12/24vDC 120A

    Blue Sea Systems Blue Sea SI-ACR Automatic Charging Relay 12/24vDC 120A

    Blue Sea Systems SI-ACR Automatic Charging Relay - 12/24V DC 120AModel: 7610-BSS Protects sensitive electronics by temporary isolation of house loads from engine circuit during engine cranking Designed for 12 or 24 volt systems 12/24 volt auto ranging voltage input Hermetically sealed contacts/vaporproof Ignition protected—safe for installation aboard gasoline powered boats Supports high-output alternators up to 120 Amperes Dual sensing Automatically combines batteries during charging, isolates batteries when discharging and when starting engines SI-ACR automatically combines batteries during charging, isolates batteries when discharging and when starting engines. The Dual Circuit Plus™ Battery Switch simplifies the switching of two batteries to OFF or ON while still providing battery isolation between the engine and auxiliary battery. The Combine function can be used to parallel the batteries in the event of a low engine battery.Specifications Nominal Voltage 12V DC 24V DC Start Isolation Yes Amperage Operating Current 175mA (combined) 15mA (open) Terminal Stud Torque 140 in-lb (15.82 Nm) Continuous Rating 120A Intermittent Rating 210A (5 min) Cable Size to Meet Ratings 1/0 AWG Stud Material Tinned Copper Terminal Ring Diameter Clearance 1.12in (28.45 mm) Terminal Stud Length 0.875in (22.23 mm) Terminal Stud Size 3/8" - 16 (M10)

    Read more

    $98.50

  • Sale -$48.08 Blue Sea 7611 DC BatteryLink Automatic Charging Relay - 120 Amp w/Auxiliary Battery Charging [7611] Blue Sea 7611 DC BatteryLink Automatic Charging Relay - 120 Amp w/Auxiliary Battery Charging [7611]

    Blue Sea Systems Blue Sea 7611 DC BatteryLink Automatic Charging Relay - 120 Amp w/Auxiliary Battery Charging [7611]

    7611 DC BatteryLink™ Automatic Charging Relay - 120 Amp w/Auxiliary Battery ChargingFeatures: 120 Amp continuous rating 12/24V DC auto ranging voltage input Senses charging on two battery banks Side and bottom knockouts for cable connections Clip-on cover insulates terminal connections 7/8" (22 mm) stud length to accept multiple cable terminals Integrated LED indicates ACR status 1/4" x .032" male quick connect terminals for ground and optional features Specifications: Intermittent Rating: 5 min.: 210 Amps Continuous Rating: 120 Amps Nominal Voltage: 12/24 Volts DC WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Continuous Amperage: 120a Box Dimensions: 4"H x 7"W x 9"L WT: 1.25 lbs UPC: 632085076115 Owner's Manual (pdf)

    Read more

    $146.07 $97.99

  • Sale -$48.08 Blue Sea 7610 120 Amp SI-Series Automatic Charging Relay [7610] Blue Sea 7610 120 Amp SI-Series Automatic Charging Relay [7610]

    Blue Sea Systems Blue Sea 7610 120 Amp SI-Series Automatic Charging Relay [7610]

    7610120 Amp SI-Series Automatic Charging Relay Allows temporary isolation of house loads from engine circuit during engine cranking to protect sensitive electronics Automatically combines battery banks during the charging cycle and isolates under discharge 12/24 Volt auto ranging voltage input Waterproof rated IP67 - temporary immersion for 30 minutes Ignition protected - safe for installation aboard gasoline powered boats Remote LED output indicates relay state away from ACR LED light indicates when batteries are combined LED blinks in undervoltage lockout and starting lockout Supports high-output alternators up to 120 Amperes Included with the ADD A BATTERY Dual Circuit System Automatically combines battery banks during the charging cycle and isolates under discharge Ignition protected - safe for installation aboard gasoline-powered boats Activates from any charging source - alternators, battery chargers, or solar panels Hermetically sealed contacts / vaporproof Side and bottom knockouts for power cable connections Clip-on cover protects and insulates terminal connections Tin-plated copper studs for maximum corrosion resistance 7/8" (22.22mm) stud length to accept multiple cable terminals 1/4" x 0.031" male quick connect terminals for ground and remote LED and starting interrupt WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Owner's Manual (pdf)

    Read more

    $146.07 $97.99

  • Sale -$47.41 Blue Sea 2104 PowerBar 600AMP Cable Connector 4 x 3/8 16 Stud Terminal [2104] Blue Sea 2104 PowerBar 600AMP Cable Connector 4 x 3/8 16 Stud Terminal [2104]

    Blue Sea Systems Blue Sea 2104 PowerBar 600AMP Cable Connector 4 x 3/8 16 Stud Terminal [2104]

    2104 PowerBar 600AMP Cable Connector 4 x 3/8 16 Stud TerminalSpecifications: Max Voltage: 300 V AC/48 V DC Number of Terminal Studs: 4 Terminal Type: 3/8" - 16 Stud WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

    Read more

    $145.40 $97.99

  • Blue Sea PowerBar 600A BussBar 4 3/8" - 16 Studs

    Blue Sea Systems Blue Sea PowerBar 600A BussBar 4 3/8" - 16 Studs

    Blue Sea PowerBar 600A BusBar - Four 3/8"-16 StudsModel: 2104-BSSSpecifications Maximum Voltage 300V AC 48V DC Number of Terminal Studs 4 Terminal Type 3/8"-16 Stud Terminal Stud Torque 140 in-lb (15.82 Nm) Continuous Rating 545A AC 600A DC Base Material UL 94-V0 Rated, Glass Reinforced Thermoplastics Bus Material Tin-Plated Copper CDA 110/UNS11000 Screw Terminal Torque 15 in-lb (1.69 Nm) Stud Torque 140 in-lb (15.82 Nm) 140 in-lb (15.82 Nm) 1.71lb (0.78 kg)

    Read more

    $97.95

  • Sale -$19.71 Blue Sea 7365 C-Series Double Pole Circuit Breaker - 30A [7365]

    View options

    Blue Sea Systems Blue Sea 7365 C-Series Double Pole Circuit Breaker - 30A [7365]

    C-Series TogglePN: 7365Poles: 2Color: WhiteAmperage: 30AFeatures: 5,000 Ampere interrupt capacity to meet ABYC requirements for 120/240 Volt 50 Ampere main protection Double pole used as 120 volt AC main circuit breaker to switch hot to neutral Triple pole used as 240 volt AC main circuit breaker to switch lines (hot) and neutral Double and triple pole circuit breakers will trip all poles will trip if any one pole trips Trip Free design cannot be held ON during fault current condition WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Amperage: 30a Box Dimensions: 4"H x 5"W x 5"L WT: 0.7 lbs UPC: 632085073657

    Read more

    $114.70 $94.99

    View options

  • Sale -$19.71 Blue Sea 7258 C-Series Double Pole Circuit Breaker - 100A [7258]

    View options

    Blue Sea Systems Blue Sea 7258 C-Series Double Pole Circuit Breaker - 100A [7258]

    C-Series TogglePN: 7258Poles: 2Color: WhiteAmperage: 100AFeatures: 5,000 Ampere interrupt capacity to meet ABYC requirements for 120/240 Volt 50 Ampere main protection Double pole used as 120 volt AC main circuit breaker to switch hot to neutral Triple pole used as 240 volt AC main circuit breaker to switch lines (hot) and neutral Double and triple pole circuit breakers will trip all poles will trip if any one pole trips "Trip Free" design cannot be held ON during fault current condition WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Amperage: 100a Box Dimensions: 4"H x 5"W x 5"L WT: 0.65 lbs UPC: 632085072582

    Read more

    $114.70 $94.99

    View options

  • Sale -$19.71 Blue Sea 7256 C-Series Double Pole Circuit Breaker - 80A [7256]

    Blue Sea Systems Blue Sea 7256 C-Series Double Pole Circuit Breaker - 80A [7256]

    C-Series TogglePN: 7256Poles: 2Color: WhiteAmperage: 80AFeatures: 5,000 Ampere interrupt capacity to meet ABYC requirements for 120/240 Volt 50 Ampere main protection Double pole used as 120 volt AC main circuit breaker to switch hot to neutral Triple pole used as 240 volt AC main circuit breaker to switch lines (hot) and neutral Double and triple pole circuit breakers will trip all poles will trip if any one pole trips "Trip Free" design cannot be held ON during fault current condition WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Amperage: 80a Box Dimensions: 4"H x 5"W x 5"L WT: 0.65 lbs UPC: 632085072568

    Read more

    $114.70 $94.99

  • Sale -$19.71 Blue Sea 7254 C-Series Double Pole Circuit Breaker - 60A [7254]

    View options

    Blue Sea Systems Blue Sea 7254 C-Series Double Pole Circuit Breaker - 60A [7254]

    C-Series TogglePN: 7254Poles: 2Color: WhiteAmperage: 60AFeatures: 5,000 Ampere interrupt capacity to meet ABYC requirements for 120/240 Volt 50 Ampere main protection Double pole used as 120 volt AC main circuit breaker to switch hot to neutral Triple pole used as 240 volt AC main circuit breaker to switch lines (hot) and neutral Double and triple pole circuit breakers will trip all poles will trip if any one pole trips "Trip Free" design cannot be held ON during fault current condition WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Amperage: 60a Box Dimensions: 4"H x 4"W x 5"L WT: 0.7 lbs UPC: 632085072544

    Read more

    $114.70 $94.99

    View options

  • Sale -$19.71 Blue Sea 7251 C-Series Double Pole Circuit Breaker - 50A [7251]

    Blue Sea Systems Blue Sea 7251 C-Series Double Pole Circuit Breaker - 50A [7251]

    C-Series TogglePN: 7251Poles: 2Color: WhiteAmperage: 50AFeatures: 5,000 Ampere interrupt capacity to meet ABYC requirements for 120/240 Volt 50 Ampere main protection Double pole used as 120 volt AC main circuit breaker to switch hot to neutral Triple pole used as 240 volt AC main circuit breaker to switch lines (hot) and neutral Double and triple pole circuit breakers will trip all poles will trip if any one pole trips "Trip Free" design cannot be held ON during fault current condition WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Amperage: 50a Box Dimensions: 4"H x 5"W x 6"L WT: 0.6 lbs UPC: 632085072513

    Read more

    $114.70 $94.99

  • Blue Sea HD-Series Battery 4 Position 500A Alternator Field Disconnect

    Blue Sea Systems Blue Sea HD-Series Battery 4 Position 500A Alternator Field Disconnect

    Blue Sea 3000 500A Battery Selector 4 Position Switch with Alternator Field DisconnectModel: 3003-BSS Tin-plated copper studs for maximum conductivity and corrosion resistance Accepts up to 4/0 AWG battery cables Studs accepts 1/2" (M12) ring terminals 7/8" (22mm) stud length accepts multiple cable terminals Blue Sea Systems one-piece terminal stud design never loosens over time Fits most Perko and Guest low amperage battery switch hole patterns Case design allows surface, rear, or front panel mounting options Tactile indicator conveys knob position by feel Waterproof — rated IP66 from water projected in powerful jets Ignition protected—safe for installation aboard gasoline powered boats Make-before-break contact design allows switching between battery banks without power interruption Includes AFD (Alternator Field Disconnect) Specifications Switch Type Selector 4 Position Color Grey Switch Positions 4 Battery Combine Yes Alternator Field Disconnect Yes Maximum Voltage 32V DC Terminal Stud Torque 220 in-lb (24.86 Nm) Continuous Rating 500A Intermittent Rating 700A (5 min) Cranking Rating 30 sec 1600A Battery Inputs 2 Cable Clearance For 4/0 AWG Cables 1.10in (27.94 mm) Cable Quantity to Meet Ratings Two Cables / Terminal Cable Size to Meet Ratings 4/0 AWG (120mm ) Mounting Holes Accept 1/4" (M6) Screw Terminal Stud Size 1/2" (M12)

    Read more

    $93.65

  • Sale -$44.80 Blue Sea 11003 HD-Series Battery Switch w/Alternator Field Disconnect - 3-Position [11003] Blue Sea 11003 HD-Series Battery Switch w/Alternator Field Disconnect - 3-Position [11003]

    Blue Sea Systems Blue Sea 11003 HD-Series Battery Switch w/Alternator Field Disconnect - 3-Position [11003]

    11003Features: Meets American Boat and Yacht Council (ABYC) requirements for battery switches Ignition protected safe for installation aboard gasoline powered boats Case design allows surface or rear panel mounting Accepts two 4/0 AWG (95mm) battery cables M12 tin-plated copper studs for maximum conductivity and corrosion resistance, accepts 1/2" and M12 ring terminals 7/8" (22.22mm) stud length to accept multiple cable terminals Tactile textures indicate knob position by feel only Case design allows surface or rear panel mounting Switch Ratings: 10 Sec: 2750A60 Sec: 1150A5 Min: 700AContinuous: 500AMax Voltage: 32V DCWARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: AFD: Yes Positions: 3 Box Dimensions: 3"H x 7"W x 9"L WT: 1.3 lbs UPC: 632085110031 Brochure (pdf)

    Read more

    $137.79 $92.99

  • Sale -$63.52 Blue Sea 3003 HD-Series Battery Switch Selector w/Alternator Field Disconnect [3003] Blue Sea 3003 HD-Series Battery Switch Selector w/Alternator Field Disconnect [3003]

    Blue Sea Systems Blue Sea 3003 HD-Series Battery Switch Selector w/Alternator Field Disconnect [3003]

    3003 HD-Series Battery Switch Selector with Alternator Field Disconnect Features: 500 Ampere Continuous Rating Accepts 4/0 battery cables Ignition protected - safe for installation aboard gasoline powered boats .870" (22.01mm) stud length to accept 4 or more cable terminals 1/2" (M12) Tin-plated copper studs for maximum conductivity and corrosion resistance Meets American Boat and Yacht Council (ABYC) requirements for battery switches Tactile textures indicate knob position by feel only Case design allows surface or rear panel mounting Fits all Perko and Guest low amperage battery switch hole patterns WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Positions: 4 AFD: Yes Continuous Amperage: 700a Box Dimensions: 3"H x 7"W x 9"L WT: 1.3 lbs UPC: 632085030032 Owner's Manual (pdf)

    Read more

    $156.51 $92.99

  • Sale -$43.62 Blue Sea 7149 200 Amp Circuit Breaker - Surface Mount [7149]

    Blue Sea Systems Blue Sea 7149 200 Amp Circuit Breaker - Surface Mount [7149]

    187-Series Circuit Breaker - Surface Mount 200A Combines switching and circuit protection into a single device* Clear, single lever operation "Trip Free" design cannot be held "ON" during fault current condition Waterproof Recessed mounting holes for clean appearance Large Clearance around terminal studs accecpt heavy gauge wire lugs Robust 5/16 M8 terminals provide high torque connections Large lever with vertical/horizontal orientation provides indication of trip status Ignition protected - Safe for installation aboard gasoline powered boats Meets SAE J1171 external ignition protection requirements * Do not use as a switch where high inrush currents are expected.WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Amperage: 200a Box Dimensions: 2"H x 5"W x 9"L WT: 0.6 lbs UPC: 632085171490

    Read more

    $135.61 $91.99

  • Sale -$43.62 Blue Sea 7049 200 Amp Panel Mount 187 Series Circuit Breaker [7049]

    Blue Sea Systems Blue Sea 7049 200 Amp Panel Mount 187 Series Circuit Breaker [7049]

    7049 200 Amp Panel Mount 187 Series Circuit BreakerFeatures: Combines switching and circuit protection into a single device* Clear, single lever operation "Trip Free" design cannot be held "ON" during fault current condition Waterproof Recessed mounting holes for clean appearance Large Clearance around terminal studs accecpt heavy gauge wire lugs Robust 5/16 M8 terminals provide high torque connections Large lever with vertical/horizontal orientation provides indication of trip status Ignition protected - Safe for installation aboard gasoline powered boats Specifications: Interrupt Rating - 5,000 A@12V DC, 3,000A@24V DC, 1,500A@42V DC Maximum Voltage Rating - 48 Volts DC Operating Temperature Range - -40xC to 85xC Circuit Breaker Type - Thermally responsive bi-metal blade Circuit Breaker Class - Type III - switchable/manual reset - trip free Terminal Stud Size - 5/16"-18 Terminal Stud Torque - 75 in-lb Mounting Holes - Accept #10 (M5) Screw Weight Lb (Kg) - 0.50 (0.23) Case Material - Thermoset Polyester WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Amperage: 200a Box Dimensions: 3"H x 5"W x 8"L WT: 0.5 lbs UPC: 632085070496

    Read more

    $135.61 $91.99

  • Blue Sea 187-Series 200 Amp Circuit Breaker Panel Mount

    Blue Sea Systems Blue Sea 187-Series 200 Amp Circuit Breaker Panel Mount

    Blue Sea Systems 187-Series Circuit Breaker - Panel Mount 135AModel: 7047-BSS Combines switching and circuit protection into a single device* Clear, single lever operation "Trip Free" design cannot be held "ON" during fault current condition Waterproof Recessed mounting holes for clean appearance Large Clearance around terminal studs accept heavy gauge wire lugs Robust 5/16 M8 terminals provide high torque connections Large lever with vertical/horizontal orientation provides indication of trip status Ignition protected - Safe for installation aboard gasoline powered boats * Do not use as a switch where high inrush currents are expected.Specifications Amperage 135A Maximum Voltage 48vDC Mounting Panel Mount Circuit Breaker Type Thermally responsive Bi-metal blade Terminal Stud Torque 75 in-lb (8.47 Nm) Interrupt Capacity 5000A @ 12V 3000A @ 24V 1500A @ 42V Minimum Operating Temperature -40° C Maximum Operating Temperature 85° C Case Material Thermoset Polyester Circuit Breaker Class Type III - switchable/manual reset - trip free Mounting Hole Accept #10 (M5) Screw Terminal Stud Size 5/16" - 18

    Read more

    $91.81

You have seen 240 out of 1087 products

Show more products

Blue Sea Systems
Footer image

© 2025 REBELLION MARINE, Powered by Shopify

    Login

    Forgot your password?

    Don't have an account yet?
    Create account

    Add address