Rocker Stopper Boat StabilizerRocker Stoppers help dampen the rocking motion of boats at anchor. Simply tie Rocker Stoppers approximately 44 cm (18″) apart, making a string of them, with a 5-10 pound weight attached at the bottom of the string. Hang one string off each side of the boat. Just four units per side are what it takes on most boats to 36′. Be sure you hang them where they will always be underwater. Many people use mushroom anchors with their Rocker Stoppers because this type of weight nests well inside the last Rocker Stopper in your string. Use 10 mm (3/8″) braided nylon or 3-stranded nylon line.Use without a weight (or with a reduced weight) for drift fishing. Rocker Stoppers will slow down drift substantially. They are also great to use at the end of a dock to stabilize the tip from rocking. Rocker Stoppers nest together and each one is 33 cm (14″) in diameter.It’s lightweight and molded of high impact, virtually indestructible styrene. Can be deployed or retrieved in seconds. Unaffected by saltwater and cannot affect the sides of your boat. Units are made to “nest” within each other, so storage is a breeze.A Number of Rocker Stopper Units Needed on Each Side of the Boat (Sail or Power): Up to 26 feet (0-8 m) – 3 27 to 36 feet (8-11 m) – 4 37 to 42 feet (11-13 m) – 5 43 to 50 feet (13-15 m) – 8 Quick Guide (pdf)

Read more less

Adjustable Transom SaverThe transom saver adjusts from 28 in. to 59 in. to reach where others will not on hard to access trailer crossbars that extend under the boat. Comes with easy to install bracket attachment. Fits most popular brands of trailers and is easily removed for loading and unloading.Features: Adjustable from 28 in. to 59 in. Includes bracket attachment Fits most trailer brands Easily removable Owner's Manual (pdf)

Read more less

Adjustable Transom Saver - Composite - Roller/BoltProtect your investment with Attwood Transom Savers. A lifted outboard puts hundreds of foot-pounds of pressure on the transom - especially during traileringProtect your boat and engine with Attwood Transom Savers: Support the cantilevered weight of the motor Stabilize engine and steering mechanism when trailering The Attwood Difference: Tough components - You'll get long life from our adjustable toggles with replaceable rubber padsWARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Non-Tipping 20oz Tumbler – TealThe Toadfish Non-Tipping 20oz Tumbler is made from high-grade stainless steel and is double-wall vacuum insulated to keep your drink icy cold or hot to the last sip. Featuring the SmartGrip suction technology, this tumbler will keep your drink upright and mess-free, along with being hard to tip but easy to lift.  Every tumbler comes with Toadfish's shatterproof lid, keeping you on the go without worrying about spilling your drink. Toadfish Model Number: TFNOTIP20OZTUM-TEALFeatures: Color: Teal SmartGrip Technology - Patented SmartGrip technology makes it hard to tip but easy to lift. Double-Wall Vacuum Insulation - Keeps your drinks cold until the last sip. Stainless Steel - Made with high-grade stainless steel, making them puncture & rust-resistant. Shatterproof Lid - Durable lid with an easy-slide tab will keep your drink safe and easy to sip. How to Use:  To use, simply place the Tumbler on any smooth surface, and it will keep your drink in place (securely upright) To remove, lift directly up This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

Gator Patch 3" x 18" Fiberglass Reinforced Repair PatchJust Prep, Peel, and Stick - Reinforced Repair Patch that Cures in Just Minutes!Repairs and protects Kayaks, Canoes, and Boats with Fiberglass, Aluminum, and Plastic surfaces. The preferred choice for a Kayak keel guard and skid plate. Cures in Sunlight in under an hour - quickly repairing or protecting your plastic, fiberglass, or aluminum surface. Can be sanded and painted for a seamless finish.Features: Gator Patch is a UV-Cure Fiberglass Reinforced Repair Patch Quick fix for a permanent solution Watertight, Impenetrable Repair Patch, Kayak Keel Guard, and Skid Plate Available in 4 sizes: 3"x6",6"x9", 9"x 12", and 3"x18" Kayak Keel Guard A Prep-Peel-Stick application that cures simply with UV light in under an hour Will bond to metal, fiberglass, wood, plastic, and virtually anywhere you need protection Repairs almost any surface, moldable around flat or curved areas, dents, joints, or angles Made With Pride in The USA. Perfect in or out of the water!  Great for any Fiberglass or Aluminum Boat, Kayaks, Canoes, Containers, Tanks, Plumbing, and more! Can be drilled, tapped, sanded, or painted within an hour Gator Patch™ is easy to use and apply with our Prep-Peel-Stick application. Cures simply with UV light in under an hour. Gator Patch comes with the extraordinary bonding and reliability promise that 100,000s of clients have known for over 20 years.Available in 4 sizes: 3"x6", 6"x9", 9"x12" and a 3"x18" Kayak Keel Guard - suitable for any patch, repair, or hull protection.Installation Tips:Using the Gator Patch to protect your kayak will make drops, skids, concrete, and cracks a thing of the past – the easiest insurance on your expensive investment. A Fiberglass Resin Patch that bonds physically and chemically to your kayak or canoe – curing in UV Sunlight in under an hour. An Easy & Simple application for a permanent protection solution.  View the complete installation instructions below.Notice for Heavy Plastic Boats:Hulls weighing over 100 pounds – such as Bass Hunter style boats or larger kayaks may benefit from additional layers of Gator Patch to increase the thickness of the most heavily worn areas for a longer lifespan.

Read more less

Motor Stik OutBoard Motor Support Stick - PairFeatures: Fits Over Trim Rams Supports Your Outboard While Trailering Takes the Pressure Off of Hydraulic System Most Outboards 150hp and Up Strong Aluminum Tubing with Molded Ends Safe for Salt or Fresh Water Note: Some Yamaha motors have a grease fitting on the port side ram. Use a single Motor Stik™ on the starboard side only in this application.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Tools Box Dimensions: 2"H x 5"W x 13"L WT: 1.15 lbs UPC: 733572067750

Read more less

Mercury 15, 20 EFI Remote Throttle/Tiller (2018-Present) & Tohatsu 9.9, 15, 20 EFI Remote Throttle/Tiller (2018+)TROLLMaster offers a variety of different servo mounting hardware kits to allow easy installation on the most popular kicker motors. The motor-specific hardware kit must be purchased as a separate item. As long as you know the make, HP and year of your kicker motor, you can determine which hardware kit you need.

Read more less

Seafood Bowl - 12" - Stainless Steel - 2 Layer Serving BowlServe seafood the way it was meant to be enjoyed—fresh, flavorful, and beautifully presented. This elegant, dual-purpose serving bowl is perfect for everything from chilled oysters to sizzling paella. The vented, two-layer design is self-draining and allows users to serve cold seafood over ice without the mess of puddling water. Flip the top layer to create a snug lid that keeps hot dishes warm while minimizing condensation. Whether users are plating cocktail shrimp, tuna tartare, or a steamy seafood medley, this bowl brings both function and sophistication to the table.Specifications: Construction: Stainless steel Bowl Base Size: 12.5” Bowl Height: 3.25” (first layer) Bowl Height: 1.75” (second layer) Quick Guide (pdf)Brochure (pdf)

Read more less

Fuel/Oil Mixing BottleAllows the addition of the exact amount of oil required for a 2-cycle engine. Oil level marks are in gallons and liters. Determines ratios for 100:1, 50:1, 24:1 and 10:1 mixes. Wide mouth, quart-size bottle.Features: Markings to mix oil for 2 Cycle engine Convenient wide-mouth, quart-size bottle Clear oil level marks in black Quick Guide (pdf)

Read more less

Gator Patch 3" x 6" Fiberglass Reinforced Repair PatchJust Prep, Peel, and Stick - Reinforced Repair Patch that Cures in Just Minutes!Repairs and protects Kayaks, Canoes, and Boats with Fiberglass, Aluminum, and Plastic surfaces. The preferred choice for a Kayak keel guard and skid plate. Cures in Sunlight in under an hour - quickly repairing or protecting your plastic, fiberglass, or aluminum surface. Can be sanded and painted for a seamless finish.Features: Gator Patch is a UV-Cure Fiberglass Reinforced Repair Patch Quick fix for a permanent solution Watertight, Impenetrable Repair Patch, Kayak Keel Guard, and Skid Plate Available in 4 sizes: 3"x6",6"x9", 9"x 12", and 3"x18" Kayak Keel Guard A Prep-Peel-Stick application that cures simply with UV light in under an hour Will bond to metal, fiberglass, wood, plastic, and virtually anywhere you need protection Repairs almost any surface, moldable around flat or curved areas, dents, joints, or angles Made With Pride in The USA. Perfect in or out of the water!  Great for any Fiberglass or Aluminum Boat, Kayaks, Canoes, Containers, Tanks, Plumbing, and more! Can be drilled, tapped, sanded, or painted within an hour Gator Patch™ is easy to use and apply with our Prep-Peel-Stick application. Cures simply with UV light in under an hour. Gator Patch comes with the extraordinary bonding and reliability promise that 100,000s of clients have known for over 20 years.Available in 4 sizes: 3"x6", 6"x9", 9"x12" and a 3"x18" Kayak Keel Guard - suitable for any patch, repair, or hull protection.Installation Tips:Using the Gator Patch to protect your kayak will make drops, skids, concrete, and cracks a thing of the past – the easiest insurance on your expensive investment. A Fiberglass Resin Patch that bonds physically and chemically to your kayak or canoe – curing in UV Sunlight in under an hour. An Easy & Simple application for a permanent protection solution.  View the complete installation instructions below.Notice for Heavy Plastic Boats:Hulls weighing over 100 pounds – such as Bass Hunter style boats or larger kayaks may benefit from additional layers of Gator Patch to increase the thickness of the most heavily worn areas for a longer lifespan.

Read more less

Queaz-Away Motion Sickness Wristbands - PairQueaz-Away is a non-drug aid for people on the go. The unpleasant effects of bumpy flights, choppy seas, winding roads, rocking trains, and spinning Ferris wheels can ruin a trip or outing. Queaz-Away wristbands exert gentle pressure on points on each wrist to minimize or eliminate the miserable effects of travel. Made of tough, long-lasting, washable materials. Safe and easy to use. Simply slip onto your wrists, position, and enjoy your travel. No complicating buckles or adjustments. One size fits all. Handy carrying case included.

Read more less

T4 Through Tilt Tube Electro Steer - Saltwater - No ElectronicsA unique product to steer a kicker motor. Can be installed on any kicker motor that has a treaded tilt tube. No need to drill holes in your transom. Installs in minutes. 9″ minimum needed between main engine and kicker motor. Controlled by a 24′ cable and two-button handheld remote. Wireless option available.*The NE option has NO ELECTRONICS to be used with a Trollmaster.  Please see item 550103 for Electro Steer with Electronics.

Read more less

Set O-Ring & Cover for Waterfilter 330Features:Vetus part #FTR3301 is replacement strainer cover and o-ring for all Vetus FTR330 series raw water strainersSpecifications:Strainer size: 13 (33/64") to 38 mm (1-1/2")Note: Do not overtighten

Read more less

SS Rope & Accessory HolderThis wall mounted Rope & Accessory Hanger is a great storage management solution. Ideal for the organization of ropes, water hoses, extension cords, etc. Deep hooks keep line in place even when heeling over. Constructed of corrosion resistant 304 stainless steel. Installs with three 1/4" RH fasteners (not included). Ropes, Lines, Cordsets!WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Stainless Steel Flagpole Hole Mount Pennant Clips - Set of 4 WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Flags & Flag Poles Box Dimensions: 1"H x 2"W x 6"L WT: 0.05 lbs UPC: 035514328555

Read more less

A.C.E. Transducer EpoxyThe perfect material for any in-hull transducer installation. A.C.E stands for Acoustically Conductive Epoxy. This will ensure the bond between the transducer and the boat hull is perfect every time. The Vexilar A.C.E. transducer adhesive works extremely well for mounting all types of transducers. Everything you need is in the package, including a pre-sized two-part system of the epoxy, a Scotch-Brite pad for surface preparation, and an alcohol wipe to clean the area. Complete instructions are on the back of the card. The package contains enough to do one transducer installation. Vexilar's A.C.E. is the right material for your fiberglass or aluminum in-hull transducer installation.Features: Specially design adhesive for best sound conduction Super strong and long lasting hold Made in the USA WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Side Sac Ballast Bag - Pair - 260lbs Each - GrayThis set of two 260 lb ballast bags are great for adding weight in compact compartments such as the ski locker, under seats, or next to direct drive motor.The FatSac Side ballast bags fit along the side of the engine compartment on direct drive inboard boats but will also fit under the seats and in compact storage compartments in many boats making them ideal for stashing weight where it will be hidden.One of the more versatile wakeboard ballast bag sizes from FatSac, the Side Sac Set can be used in multiple locations throughout the boat to add additional ballast where it's neededSold as a pair, for extra value.Features: Side Sac (Set) 260 lbs each 48 x 12 x 12 inches In the Box: Ballast Bag x 2 Six Valves/Caps (W731 x 2, W749 x 2 and W730 x 2) *Sold as a PairWARNING: This product can expose you to chemicals including Diisononyl Phthalate (DINP) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov. Specifications: Type: Ballast Bags Box Dimensions: 6"H x 12"W x 18"L WT: 9.2 lbs UPC: 817177020348 Brochure (pdf)

Read more less

T5 Through Tilt Tube Electro Steer - Saltwater - No ElectronicsT5 provides a unique solution to steer a kicker motor. Can be installed on kicker motor with threaded tilt tube without drilling any holes in the boat. Installs in minutes and requires only 4 inches between the main engine and kicker.Mounting hardware included*The NE option has NO ELECTRONICS to be used with a Trollmaster.  Please see item 550503 for Electro Steer with Electronics.

Read more less

Mercury Mariner 9.9, 15 (1990-2004) & Yamaha 9.9, 15 (1990-2006)TROLLMaster offers a variety of different servo mounting hardware kits to allow easy installation on the most popular kicker motors. The motor-specific hardware kit must be purchased as a separate item. As long as you know the make, HP and year of your kicker motor, you can determine which hardware kit you need.

Read more less

 Power Pole Cover f/Pro Series & Sportsman 8' Models OnlyPower Pole protective travel cover made of 1800 denier polyester PVC coated black fabric. The PVC coated inside assures that the cover will not scratch the finish while protecting the power pole from road debris while trailering. The cover fits securely over the power pole and attaches with a strap at the bottom without having a full length zipper to get gummed up with mud, muck and debris. Travel cover cannot be used when accessories are mounted on power pole. For Pro Series/Sportsman 8' power poles only.

Read more less

Yamaha 6, T8 (All Years) & 9.9 (2008-Present)TROLLMaster offers a variety of different servo mounting hardware kits to allow easy installation on the most popular kicker motors. The motor-specific hardware kit must be purchased as a separate item. As long as you know the make, HP, and year of your kicker motor, you can determine which hardware kit you need.

Read more less

Tac Free Protective Topcoat - 12ozTac Free is a flexible satin top coat used to eliminate plasticizer migration on coated surfaces.   Features: Eliminates tackiness on refinished vinyl Wet on wet application saves time Protective coating Resistant to alcohol based cleaners Applications:Vinyl previously coated with Color Coat, Classic Coat or Vinyl Coat Quick Guide (pdf)

Read more less

V-drive Wakesurf Fat Sac Ballast Bag - 400lbs - GrayThe FatSac V-Drive ballast bag is a perfect option for mid-size ballast bags.As FatSac's most versatile sac, the V-Drive Fat Sac can be used nearly anywhere in the boat.Place it in the bow, the walk way, on a seat, beside a seat, or in a storage locker to enhance the wakeboard or surf wake behind your boat. The V-Drive Wake Surf Sac is the same bag that is sold in a pair as the W701 Series of ballast bags.Features: V-drive Fat Sac 42 x 16 x 16 inches In the Box: Ballast Bag Four Valves/Caps (W731 x 2, W749 x 1 and W730 x 1)  *Sold as an Individual WARNING: This product can expose you to chemicals including Diisononyl Phthalate (DINP) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov. Specifications: Type: Ballast Bags Box Dimensions: 6"H x 12"W x 18"L WT: 6 lbs UPC: 817177020645 Brochure (pdf)

Read more less

Swim Platform Outboard Motor BracketBuilt extra-tough and extra-wide for auxiliary motors. The mounting board is 2” thick weatherproof and maintenance-free polypropylene. Adjustable for long or short shaft engines. Position trim adjustment available by moving bolts on bracket. Rated for outboards up to 20 HP.Features: Adjustable outboard motor bracket designed to mount on most swim platforms Rated for 2- and 4- stroke motors up to 20HP Constructed of black powder-coated aluminum and can be adjusted to fit most platform heights and motor shaft lengths for optimum prop depth and performance Comes complete with a transom support bar for weight support and torque resistance Do NOT use without Panther 55-0415 safety cable – included

Read more less

Wally Plug with O-RingsFatSac Replacement Ballast Bag Plug is used to plug unused holes on FatSac ballast bags. Fits the proprietary thread pattern used on FatSac bags making a perfect water-tight seal that won't leak or back out over time.Off-the-shelf FatSac ballast bags include the required number of bag plug fittings, but if you're misplaced one or want to have extras, this is the fitting you need to close any unused holes on the bag.FatSac ballast fittings have been designed with you in mind.  All of the fittings make connecting pumps and hoses to your FatSac a quick and simple task. Features: Wally plug O-ring *Sold as an Individual WARNING: This product can expose you to chemicals including Diisononyl Phthalate (DINP) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov. Specifications: Type: Fittings & Hoses Box Dimensions: 1"H x 2"W x 3"L WT: 0.07 lbs UPC: 817177021376 Brochure (pdf)

Read more less

Carbon Fiber Flag Pole with J-Lock System - 26"Take your marine flag display to the next level with the Easy n’ Secure Fit Carbon Fiber Flagpole. Built for today’s boater, these flagpoles pair ultralight durability with high-strength carbon fiber construction, delivering exceptional performance without added weight. Featuring our patented twist-and-lock technology, they install effortlessly into existing hardware and stay firmly in place— no rattle, no fuss. The result is a clean, premium presentation that enhances vessels of any size.Features: Fits 12” x 24” flags Patented twist-and-lock system for quick, secure install/removal Lightweight Carbon Fiber material with clear, Awl Grip UV-protection Corrosion-resistant hardware, built for harsh saltwater conditions 360° tangle-free swivel keeps flags flying freely Fits standard 1-5/8” rod holders and gunwale mounts Rattle-free fit with precision tapered wedges (including 30° wedge) Stable and secure, even at cruising speeds Versatile mounting options Brochure (pdf)

Read more less

Tele-Sun Aluminum Shade Poles with Carry BagExtend your time on the water and at the sandbar with the new Aluminum Tele-Sun Shade Poles! Made from a strong, lightweight drawn aluminum tube, the Tele-Sun Shade Poles are easy to install and stow – maximizing time and fun on your boat. Insert the poles into your boat’s rod holders, secure a sun-protecting fabric to the boat top, attach the fabric connector to the poles, and extend the poles into position. The Tele-Sun Shade Poles can be mounted to the front or rear of your boat, depending on your preference, and telescope from just over 44.6” to 69.37” tall.Features: Lightweight drawn and anodized aluminum tube material  Built to withstand the harsh marine environments  Easy installation on deck-mounted rod holders with a 1/4” pin  The nylon cleat allows for easy adjustment of line tension  The tip ring feature provides for an alternative fabric clamping bungee cord system  Extends from 44.6” to 69.37”  Not included - Flush Mount Rod Holder 10° (Part # F31-0702BXY) and canvas material *Comes as a pair Brochure (pdf)

Read more less

16" x 24" Deluxe Sewn 50 Star FlagThese deluxe sewn flags are constructed from lightweight yet durable fade resistant polyester fabric, which make them the perfect all-weather flags.Features: Individually Sewn Stripes Embroidered Stars Brass Grommets Four-Needle Flyend Specifications: Type: Flags & Flag Poles Box Dimensions: 1"H x 5"W x 8"L WT: 0.2 lbs UPC: 040011954244

Read more less

Rope LadderAttwood's 5-step, white boarding ladder. Sturdy 11-3/4" blow molded steps, textured step surface and steps connecting by a nylon rope with a top loop to secure to a cleat or a railing.Features: Non-anodized aluminum tubing Polyethylene steps 11" hooks and support legs Folds flat for storage Sturdy 11-3/4" blow molded steps Textured step surface for sure footing Steps connected by a nylon rope with top loop that quickly secures to cleat or railing WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Flex TrimLength: 25'"A": 5/32""B": 9/16"Color: WhiteTACO Metals supplies quality trim that is designed to protect boat interiors and exteriors from the harsh marine environment.Trim & MouldingTrim and moulding products provide finish, protection and structural integrity. TACO trim and moulding products are the best in the industry and are used extensively throughout boat interiors and exteriors.MaterialsDepending on the product line, TACO's trim and moulding products are offered in aluminum, vinyl and specially formulated rubber compounds. TACO insists on using prime billet 6000 series aluminum alloys to ensure superior structural strength, precise bending and long-lasting performance. Vinyl and plastic products are made from prime resin and warranted for 5 years. Covers unfinished edges and follows almost any contour or radius Made of flexible PVC Integrated interior aluminum clip and gripping tongue ensures a better fit This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

Quick Reference International Navigation Rules CardA comprehensive guide incorporating the International Maritime Buoyage System and COLREGS. Clarifies differences between Cardinal and Lateral buoyage systems and buoyage regions, the key to reducing confusion and danger when entering unfamiliar waters or busy harbors. Complete details on the right-of-way, sound signals, entering and clearing a foreign port, lights and day shapes, collision prevention procedures, and signal flags.

Read more less

Florida Nylon Flag 12" x 18"All flags measure 12" x 18" with brass grommets.Single sided screen printed on vibrant bright nylon colors. Specifications: Type: Flags & Flag Poles Box Dimensions: 2"H x 5"W x 8"L WT: 0.1 lbs UPC: 040011930965

Read more less

MConnect® Vessel Monitoring & Control Web ServerMConnect is a cutting-edge, NMEA 2000® certified web server and screen editor designed to enhance the boating experience by centralizing control, monitoring, and automation functions. It connects to over 400 NMEA 2000® data points on a vessel, providing real-time visual feedback through customizable, modern graphics on multi-function displays or any browser-enabled device.Engineered to cater to vessels of all sizes, this powerhouse delivers real-time data displayed on sleek web pages accessible from your favorite devices—phones, tablets, PCs, or MACs, take your pick! MConnect, inspired by the design brilliance of Maretron’s award-winning N2KView® Vessel Monitoring and Control Software, boasts intuitive graphic controls that transform complex data into a visually stunning experience.MConnect integrates with marine Multifunction Displays (MFDs) like Garmin OneHelm™, Raymarine LH, and many more. It also fully integrates with digital switching systems such as Octoplex® and MPower® for a truly interconnected marine ecosystem.MConnect doesn’t stop at one NMEA 2000 bus—it connects directly to two, independently receiving data from both. Monitor Primary and Secondary buses, or keep an eye on Navigation and Monitoring buses separately—no bridge is required.Spot potential issues at a glanceSay goodbye to deciphering data jargon! MConnect uses vibrant colors and high-definition graphics to give you an instant visual checkup of your boat's health. Spot potential issues at a glance as the information effortlessly synchronizes across various screens. Fast, seamless, and beginner-friendly, MConnect boasts an uncluttered interface that you can customize to fit your needs.Revolutionizing vessel monitoring for OEMsMConnect isn't just a powerful tool for vessel monitoring; it's a game-changer for Original Equipment Manufacturers (OEMs). We understand the importance of brand identity, and with MConnect, OEMs can take control like never before. Seamlessly integrate your brand aesthetics into the MConnect interface by creating custom graphics that align with your unique identity. This unprecedented feature empowers OEMs to showcase their brand seamlessly within the monitoring experience. The result? A truly cohesive and branded vessel monitoring solution that not only delivers unparalleled functionality but also elevates your brand presence on board. MConnect opens up a realm of possibilities for OEMs, ensuring their vessels stand out with a distinctive visual identity, making waves in both performance and style.Your boat's well-being has never been so accessibleMConnect opens the doors wider with its simultaneous multi-user capability and an attractive price point.Features:Advanced CustomizationThe built-in MConnect Editor provides an unparalleled level of customization, allowing users to design screen layouts from scratch or choose from 87 pre-built options. OEMs can tailor the interface to match their brand identity, creating a cohesive branded user experience. This flexibility enables a truly personalized user interface, catering to both novice and expert users.Dual NMEA 2000® Bus ConnectivityMConnect can independently connect to and receive data from two optically isolated NMEA 2000® networks, offering enhanced reliability and redundancy that ensures continuous system monitoring.Full Integration with Digital Switching SystemsMConnect uses standard NMEA 2000® switching PGNs, allowing seamless integration with third-party systems as well as our own Octoplex® and MPower® systems. This consolidation of control and monitoring simplifies complex integrations into one platform.Web-Based AccessibilityUnlike traditional systems, MConnect’s web server allows remote access from any device with a browser and uses VPN support for enhanced data security. This ensures both versatility and security for onboard and offboard management.Affordable PricingMConnect provides high-end features at a competitive price, delivering exceptional value without compromising on quality or performance.Specifications: Engaging HTML5 user interface experience Design your look with custom graphics Can support simultaneous access by up to four users Dual Can Bus for dual or redundant NMEA 2000 Connections 9-32 Volt Power Input (with reverse polarity protection) Only 5-watt power usage RJ45 Ethernet Port USB 3.0 Port WIFI This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Quick Guide (pdf)Owner's Manual (pdf)

Read more less

Boat Cover Reinforcement/Repair KitKit includes one square yard of self adhesive material. Use it to add extra padding to stress points from windshields, trolling motors, etc. or to patch wear areas and tears that may develop over time. Simply cut to desired size and apply to clean, dry surface. Specifications: Type: Parts Box Dimensions: 2"H x 8"W x 11"L WT: 0.8 lbs UPC: 813095022570

Read more less

Boat Cover Snap PatchUse this adhesive snap patch on the underside of a boat cover to reinforce and provide a location to attach a snap-in style support pole. Specifications: Type: Parts Box Dimensions: 0"H x 6"W x 7"L WT: 0.06 lbs UPC: 081231296301

Read more less

12" x 18" Deluxe Sewn 50 Star FlagThese deluxe sewn flags are constructed from lightweight yet durable fade resistant polyester fabric, which make them the perfect all-weather flags.Features: Individually Sewn Stripes Embroidered Stars Brass Grommets Four-Needle Flyend Specifications: Type: Flags & Flag Poles Box Dimensions: 1"H x 5"W x 8"L WT: 0.2 lbs UPC: 040011954183

Read more less

Skipper Flag Clips w/SS Screw Eyes (4pk)Stainless Steel Skipper Clips provide an easy way of attaching flags, canopies, curtains, etc. The extended length of these versatile clips reaches grommets 3/4" from fabric edges. Package includes (4) Skipper Clips and self-tapping screw eyes for attachment to wood, metal of fiberglass. Specifications: Type: Flags & Flag Poles Box Dimensions: 1"H x 2"W x 5"L WT: 0.2 lbs UPC: 040011579331

Read more less

Universal T-Top Center Console Cover - BlueThis trailerable T-Top Console cover is secured to the underside of the fixed T-Top structure and will enclose any size console, helm seat and T-Top support combination with a maximum base perimeter (at the deck) of 18' or less. All console covers measure 48"W x 60"L x 66"H.Features: Adjustable straps allow the cover to conform to most console configurations Boats with smaller consoles and T-Tops can also cover and protect the helm seats Heavy duty marine grade zipper allows easy installation and removal Specifications: Type: Covers Box Dimensions: 7"H x 9"W x 16"L WT: 7.4 lbs UPC: 040011714541

Read more less

Flow-Rite 3/4" Elbow Quick Connect Socket for Auto Ballast SystemFeatures:These connect to FatSacs W736, custom machined fittings*Sold as an Individual WARNING: This product can expose you to chemicals including Diisononyl Phthalate (DINP) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov. Specifications: Type: Fittings & Hoses Box Dimensions: 2"H x 3"W x 3"L WT: 0.05 lbs UPC: 817177021475 Brochure (pdf)

Read more less

Mercury 5 & 6 (All Years) & Nissan/Tohatsu 5 & 6 (1995 - Present)TROLLMaster offers a variety of different servo mounting hardware kits to allow easy installation on the most popular kicker motors. The motor-specific hardware kit must be purchased as a separate item. As long as you know the make, HP and year of your kicker motor, you can determine which hardware kit you need.

Read more less

Transom Mounting Hardware KitBuilt tough for serious anglers, Power-Pole's transom mounting hardware kit makes direct-to-transom mounting simple and reliable. Designed for all Power-Pole shallow water anchor models, the kit comes with bolts, washers, and nuts—engineered to handle the demands of life on the water.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Type: Parts Box Dimensions: 1"H x 4"W x 7"L WT: 0.5 lbs Owner's Manual (pdf)

Read more less

Emergency Tow Strap - 10,000lb CapacityThis emergency tow strap is a must have if your boat becomes inoperable. The fluorescent orange bag for storage can also be used to wave down help or as a backup if you're required to have an orange flag for towables. We've taken 2" wide 10,000 lb. test yellow webbing and attached 2 10,000 lb. drop forged hooks 30' long for a marine tow strap. 10,000 LB capacity. For marine use only.

Read more less

Little Hawk Mk 2 Wind IndicatorThe Little Hawk Mk 2 brings all of the benefits of the Little Hawk Mk 1 Wind Indicator and mounts it in a secure manor at gooseneck height in front of the mast. Designed for smaller single handed Dinghies, the Little Hawk Mk 2 allows quick and accurate reference to wind direction without having to look at the top of the mast. Ideal for upwind and downwind reference. The Little Hawk Mk 2 is easily mounted and removed with a secure adjustable bracket. The aluminum support rod can be bent to any required angle, but is easily straightened if accidentally knocked. The complete unit removes for safe storage without any tools. The Little Hawk Mk 2 is very popular with Laser sailors. Specifications: Vane Arm length 16.5cm (6.5") Overall height 19cm (7.5") Weight 28 grams Specifications: Type: Wind Indicator Instrument Function: Wind Box Dimensions: 1"H x 4"W x 12"L WT: 0.12 lbs UPC: 652773100502

Read more less

Suzuki 9.9, 15 Remote Shift/Throttle & Tiller (2014-Present)TROLLMaster offers a variety of different servo mounting hardware kits to allow easy installation on the most popular kicker motors. The motor-specific hardware kit must be purchased as a separate item. As long as you know the make, HP and year of your kicker motor, you can determine which hardware kit you need.

Read more less

Seal Kit for Reversing PumpReversing pump seal kit

Read more less

GS-2-50 Grounding Strap - 2" x 50'This grounding strap is an ideal conductor for RF grounding of SSB radios and other noise-sensitive transceivers, for bonding thru-hulls, etc.Features: Flexible (easily conforms to vessel contours) .01 in. (25mm) thick Specifications: Width (in./cm): 2/5.1 Length (ft./m): 50/17 Weight (lbs/kg): 5/2.3

Read more less

Weather SealLength: 10'Height: 3/8"Width: 5/8"Color: BlackTACO Metals supplies quality weather seal that is designed to protect boat interiors and exteriors from the harsh marine environment. Well suited for live-wells, exterior doors, instrument covers and electronic boxes. TACO weather seal products are made of specially formulated rubber compounds, designed and engineered to provide maximum sealing capacity and protect against weathering and vibration. Absorbs shock and reduces vibration Offers superior resistance to water absorption, sunlight and extreme temperatures Durable EDPM synthetic rubber compound Ideal for live-wells, exterior doors, instrument covers and electronic boxes Adhesive backing for convenient installation This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

Carbon Fiber Flag Pole with J-Lock System - 54"Take your marine flag display to the next level with the Easy n’ Secure Fit Carbon Fiber Flagpole. Built for today’s boater, these flagpoles pair ultralight durability with high-strength carbon fiber construction, delivering exceptional performance without added weight. Featuring our patented twist-and-lock technology, they install effortlessly into existing hardware and stay firmly in place— no rattle, no fuss. The result is a clean, premium presentation that enhances vessels of any size.Features Fits 3' x 5' flags Patented twist-and-lock system for quick, secure install/removal Lightweight Carbon Fiber material with clear, Awl Grip UV-protection Corrosion-resistant hardware, built for harsh saltwater conditions 360° tangle-free swivel keeps flags flying freely Fits standard 1-5/8” rod holders and gunwale mounts Rattle-free fit with precision tapered wedges (including 30° wedge) Stable and secure, even at cruising speeds Versatile mounting options Brochure (pdf)

Read more less