Soft-Mate Beverage HolderFeatures: Perfect size for beverage cans with insulators Flexible P.V.C. Includes mounting screws Height: 5" (12.7cm) Width: 3" (7.6cm) Diameter: 3-1/2" (8.9cm)

Read more less

60° Rod Holder Grill Mount Kuuma's 60° Rod Holder Grill Mount enables you to turn your fishing rod holder into a grill mount.  The mount has a 60° angle and an adjustable height of up to 5". It fits most 60° rod holders with cross pins.  The mounting plate is constructed of durable Stainless Steel and the extension rod is constructed of resilient Aluminum for strength.Compatible With:All Kuuma grillsFeatures: Allows you to turn your fishing rod holder into a grill mount Adjustable Height Fits most 60° rod holders with cross pins Measurements: 13-inches (height) x 5-inches (width) x 5-inches (depth) Dimensions (H x W x D) - 13" x 5" x 5" Includes all necessary hardware for easy mounting *Sold as an Individual WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Soft-Mate Radio HolderBeckson's Soft-Mate Radio Holder holds handheld GPS units, radios, and cell phones. The safety-soft flexible PVC holder won't hurt the user or the equipment.The full size HH-8 is the ideal size for the large hand held radios (CB and 2 meter), GPS units, and scanners.Meaures 6" high, 3" wide, 2" deep. Specifications: Type: Mounting Brackets Box Dimensions: 2"H x 3"W x 6"L WT: 0.4 lbs UPC: 021083003351

Read more less

Two-Tier Spice Rack Holds up to 6 standard spice bottles on each self Shelves are 3" deep 13-1/8"W x 10-1/8"H x 4-1/4"D

Read more less

Dish/Cup/Utensil Holder Holds cups, plates, and flatware 16-1/4"L x 9-7/8"H x 7-1/8"D

Read more less

Nestable 10 Piece Induction Non-Stick Enamel Finish Cookware Set - Jet Black Made of 18-8 mirror polished Stainless Steel, Magma’s Award-Winning 10-Piece Cookware Set is now available with an elegant colored exterior and Non-Stick coating.  Set completely nests and store them in less than 1/2 cu. ft. of cabinet space and are compatible with all stove types, including induction.  The heavy-duty Non-Toxic, PFOA, and PTFE free, Slate Black, non-stick interior is remarkably easy to clean, and will not stain, peel, blister, or flake. The encapsulated Triple-Clad bottoms (Stainless Steel, Aluminum, Stainless Steel) are milled perfectly flat for perfect heat distribution.  The Triple-lad bottoms outer layer uses the highest quality ferromagnetic stainless steel, specifically used to activate the magnetic field in all Induction cooking surfaces. Features: Induction Compatible 18-10 Stainless Steel with an elegant look Stores in less than 1/2 cu. ft. of space Encapsulated triple-clad bottoms (Stainless Steel, Aluminum, and Magnetic Stainless Steel) for perfect even heat distribution Earth-friendly, Non-Toxic, PFOA, and PTFE free Scratch resistant and Extremely Durable Ergonomic removable handles with instant thumb release; easily attach and detach to interchange between pans Oven Safe to 500° (Excluding Removable Handles) Technical Specifications: Material (Exterior) - Enamel Coated 18-10 Stainless Steel  Material (Interior) - Ceramic Coated Stainless Steel  Material (Handle) - Cast Thermo-Plastic with Stainless Steel Heat Shield  Number of Pieces - 10 Weight - 13 lbs In the Box: Three (3) Sauce pans (1-1/2 qt., 2 qt., and 3 qt.) One (1) Sauce pan lid   One (1) 5 qt. Stock pot One (1) 10" Diameter Skillet/Frying Pan  One (1) Stock pot and skillet/fry pan lid  Two (2) Ergonomic removable handles  One (1) Bungee storage cord *Sold as an Individual 

Read more less

LED Flush Mount Combo Drink Holder with Drain Fitting - Red LEDThe corrosion resistant stamped 304 stainless combo LED drink holders feature three LEDs, available in red for night vision. The flush mount dual-purpose design allows the use of beverage cans with or without insulated wraps as well as most standard size bottles. Integral drain fitting allows water to be drained directly into bilge with the use of 1/4" tubing (not included). Requires a 3-5/8" hole for installation. The bottom is padded with a rubber insert to prevent rattling. 12VDC.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Rail Base Fitting Rectangular Base 30° 316 Stainless Steel - 1-7/8" x 32-3/16" - 1" ODThese Rectangular Rail Base Fittings include set screws where appropriate. Set screws can be purchased separately (299999-1). Requires 1/8" Allen wrench to install. Constructed of corrosion resistant investment cast 316 stainless steel. Installs with four FH fasteners (not included). *Stainless tubing with a wall thickness of 0.049”. Features: Investment Cast 316 Stainless Steel  30° Rectangular Base 1" Tube OD Base: 1-7/8" x 3-3/16" Fastener: 1/4" FH WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

LED Flush Mount Combo Drink Holder with Drain Fitting - Blue LEDThe corrosion resistant stamped 304 stainless combo LED drink holders feature three LEDs, available in red for night vision. The flush mount dual-purpose design allows the use of beverage cans with or without insulated wraps as well as most standard size bottles. Integral drain fitting allows water to be drained directly into bilge with the use of 1/4" tubing (not included). Requires a 3-5/8" hole for installation. The bottom is padded with a rubber insert to prevent rattling. 12VDC.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Fold-Up Drink Holder - Dual Ring - WhiteHolds coffee mugs with a handle, 12-ounce cans, or drink insulators. Mount quickly and easily on boats or RVs. Flip the small ring up to hold small drinks; for large drinks, flip the small ring down and use the large ring. When not in use, flip rings down and close the cover for convenient storage. 7/8" closed depth. Four holes for #10 screws.

Read more less

Replacement Blade for Chinook with Rocker Switch - BlackReplacement Blade specifically for Chinook with Rocker Switch.Color: Black

Read more less

Ultimate 747 24V 2-Speed 7" Fan with Lighter Plug - WhiteCaframo's most popular marine fan. FingerSafe blade allows for maximum airflow. Two-speed options.Industry recognized and a long-time favorite of sailors! The model 747 Ultimate 24 Volt DC fan is recognized by Practical Sailor magazine as a "Best Buy" in the marine market. It features a Fingersafe blade that does not require a protective grill and has a shock-absorbing leading edge that flexes when it is stopped. The resulting maximum airflow makes the 747 Ultimate the top choice for sailors heading to hot, humid climates.Features: Two speeds Comes with two mounting options (permanent or removable suction cup) Long life, low power drawing motor Adjustable base and tilting head Benefits: Maximum airflow Easy to clean Easy to install Quiet, dependable operation Direct air in any direction Match any boat interior The fan stays in place in rough seas Owner's Manual (pdf)Brochure (pdf)

Read more less

Lure Rack Holds up to 25 lures A place to put a filet knife and pliers Can be mounted with included suction cups or permanently mounted with separately purchased screws WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less