PM-W6-7This 6° wedge goes between your Seaview mount and mounting surface. The base of the wedge is 7"x7" and is made from machined King Starboard . Utilize wedges to compensate for deck angle or planning attitude of the boat.Features Pre-drilled mounting holes allow for quick and easy installation Made from marine-grade polymer Specifications: Type: Wedges Box Dimensions: 2"H x 9"W x 10"L WT: 1.2 lbs UPC: 839662002325 Quick Guide (pdf)

Read more less

4 Degree Wedge for Power MountThe most common planing attitude requires 3° - 4° of adjustment. If you are unsure which to choose then we recommend the 4° wedge. We do however offer 2° & 6° wedges if you feel a little more a little less is better for your application.Features: Pre-drilled mounting holes allow for quick and easy installation Made from marine-grade polymer Specifications: Type: Wedges Box Dimensions: 2"H x 9"W x 10"L WT: 0.8 lbs UPC: 839662008907 Quick Guide (pdf)

Read more less

18" Modular Mount AFT Raked 10 x 10 Base Plate for Large Sat Domes - 18" Top Plate RequiredThis Seaview Modular Mount works with most satellite domes. The modular design allows you to add various accessories and different top plates at any point. Thus making it a cost effective choice. Specifically designed to not take up a large amount of space results in the perfect solution where space saving is a must. Oval hollow mast section allows for easy cable management.Modular Top PlateA Seaview Modular Top Plate is required to mount a radar, satellite dome, camera or search light, and is sold separately.Modular DesignThe modular design allows the user to not have to replace the entire mount when a different radar or satdome is used. Instead the user can just replace the top plate. Specifications: Type: Aft Leaning Mount Height: 18" Box Dimensions: 13"H x 21"W x 21"L WT: 14.8 lbs UPC: 839662008990 Quick Guide (pdf)

Read more less

1-1/4" Light Bar for 18" or Smaller Satdomes - Requires LTB TopSeaview light bars are made from aluminum and powder coated brilliant white and are compatible with Seaview Modular Mounts (polished S.S. light bars also available). These light bars are 1.25" in diameter. Different styles of light are available as well as numerous accessories for your light bar. Accessories such as LED anchor lights, GPS adapters, wind transducer adapters, etc. What's also unique with Seaview light bars is that many can fold over 90° to allow for extra height clearance.Many StylesThere are many different styles of Seaview light bars so you can be sure to get one that will work with your specific application. Styles for closed dome radars, satellite domes, open array radars and cameras/search lights.Extra Height ClearanceOn select Seaview light bar models some can fold over 90° to allow for extra height clearance. Simply loosen the four bolts around the stainless steel clamp and fold over in either direction.Easy InstallationSecured with a stainless steel clamp, simply use the supplied four bolts   Specifications: Type: Light/GPS Brackets Box Dimensions: 7"H x 13"W x 32"L WT: 4.5 lbs UPC: 839662009201 Quick Guide (pdf)

Read more less

Vision Series Mounting Plate f/Raymarine Quantum, 2kW & 4kW Radar DomesWith Edson's Vision Series Mounting System, you can select your desired Mounting Plate to best fit your electronics. Edson's 68551 Vision Series Mounting Plate is designed for Raymarine Radar Domes (Quantum, Quantum 2, RD418D, RD424D, RD418HD, RD424HD). Mounting Plates are required to complete an Edson Vision Series Mounting System. Base mount sold separately.  Specifications: Type: Adapters Box Dimensions: 1"H x 16"W x 16"L WT: 1 lbs UPC: 796744685510

Read more less

Light Arm for Open Array RadarsEdson's 68660 Vision Series Light Arm allows you to attach your Navigation Light to your Edson Vision Series Mount with a Open Array Radar. Light Arm extends 28" toward the stern allowing room for your Radar or Satellite Dome. The Light Arm is 28" tall, which meets Coast Guard standards for navigation lights.Edson's Light Arm requires a Light Arm Receiver that is dependent on the style of Vision Series Mount you have (Aft Angled or Vertical). Specifications:Mounting Plates and Light Arm Receiver are required to complete an Edson Vision Series Mounting System. (sold separately)Base mounts sold separately Specifications: Type: Light/GPS Brackets Box Dimensions: 3"H x 32"W x 33"L WT: 5.2 lbs UPC: 796744686609 Quick Guide (pdf)

Read more less

Light Arm for Radar Domes and Sat DomesEdson's 68650 Vision Series Light Arm allows you to attach your Navigation Light to your Edson Vision Series Mount with a Radar Dome and Satellite Dome. Light Arm extends 14" toward the stern allowing room for your Radar or Satellite Dome. The Light Arm is 28" tall, which meets Coast Guard standards for navigation lights.Edson's Light Arm requires a Light Arm Receiver that is dependent on the style of Vision Series Mount you have (Aft Angled or Vertical). Specifications:Mounting Plates and Light Arm Receiver are required to complete an Edson Vision Series Mounting System. (sold separately)Base mounts sold separately Specifications: Type: Light/GPS Brackets Box Dimensions: 1"H x 16"W x 42"L WT: 3.1 lbs UPC: 796744686500 Quick Guide (pdf)

Read more less

Light Arm Receiver for Aft Angled MountsThe Light Arm Receiver secures a Light Arm to the mounting plate on Edson Vision Series Aft Angle Mounts. Edson's Light Arm Receivers require an Edson Mounting Plate and an Edson Vision Series Mount.Specifications:Mounting Plates are required to complete an Edson Vision Series Mounting System. Base mounts sold separately Specifications: Type: Light/GPS Brackets Box Dimensions: 3"H x 6"W x 9"L WT: 0.3 lbs UPC: 796744686302

Read more less

Vision Series Mount - 6" Aft Angled - Heavy Duty for Open Array RadarsThe Vision Series Mounting System is a revolutionary design that provides the simplest, most attractive solution to your electronics mounting requirements.Features: All-new sleek, modern design First all modular system - extremely versatile Simple selection and installation Easy to add accessories Powder coated aluminum Requires Vision Mounting Plate to install radar or sat dome antenna 6" Heavy Duty Aft Mount 6" Tall Aft raked 30 degrees Specifications: Type: Aft Leaning Mount Box Dimensions: 8"H x 13"W x 15"L WT: 7.8 lbs UPC: 796744681109

Read more less

Intellian/KVH/Cobham Mounting PlateWith Edson's Vision Series Mounting System, you can select your desired Mounting Plate to best fit your electronics. Edson's 68720 Vision Series Mounting Plate is designed for Intellian FB150 & FB250, KVH TracPhone Fleet One FB150 & FB250, and Cobham Sailor FB150 & FB250.Specifications:Mounting Plates are required to complete an Edson Vision Series Mounting System. Base mounts sold separately Specifications: Type: Adapters Box Dimensions: 1"H x 16"W x 16"L WT: 2.95 lbs UPC: 796744687200 Quick Guide (pdf)

Read more less

Garmin Mounting Plate for 18" & 24" HD, xHD, HD+ 4kW Radar domesWith Edson's Vision Series Mounting System, you can select your desired Mounting Plate to best fit your electronics. Edson's 68520 Vision Series Mounting Plate is designed for Garmin 18 and 24 Radar Domes (GMR Fantom 18, GMR Fantom 24, GMR 18 HD+, GMR 18 xHD, & GRM 24 xHD). Specifications:Mounting Plates are required to complete an Edson Vision Series Mounting System. Base mounts sold separately Specifications: Type: Adapters Box Dimensions: 1"H x 16"W x 16"L WT: 2.6 lbs UPC: 796744685206 Quick Guide (pdf)

Read more less

The Vision Series Mounting System is a revolutionary design that provides the simplest, most attractive solutions to your electronics mounting requirements.  Dual Mount for a Radar Dome and a Satellite Dome. Two Mounting Plates required. Features: All-new sleek, modern design First all modular system - extremely versatile Simple selection and installation Easy to add accessories Two marine electronics mounting platforms Powder coated aluminum Requires Vision Mounting Plate to install radar or sat dome antenna18" Sat Dome Dual Mount Aft raked 30 degrees 18" tall Specifications: Construction: Powder Coated Aluminum Type: Dual Mount Box Dimensions: 11"H x 19"W x 31"L WT: 16.8 lbs UPC: 796744682007 Quick Guide (pdf)

Read more less

Furuno & Sitex Mounting PlateWith Edson's Vision Series Mounting System, you can select your desired Mounting Plate to best fit your electronics. Edson's 68510 Vision Series Mounting Plate is designed for both SiTex 2kw, 4kw Radar Domes (T-2041, MDS-9, MDS-8, MDS-1, T-941, T-921, T-761, T-760) and  Furuno 2kw, 4kw Radars (15", 18”, 19” and 24" Domes and 3.5’ & 4' Open Arrays). Specifications:Mounting Plates are required to complete an Edson Vision Series Mounting System. Base mounts sold separately Specifications: Type: Adapters Box Dimensions: 1"H x 16"W x 16"L WT: 2.5 lbs UPC: 000007967443 Quick Guide (pdf)

Read more less

Removable Base for Pedestal Mounts with 10x10 Base Plate - WhiteThese innovative mounts save time, money, and headaches for many different types of boat owners. Designed with a self-draining waterproof base, these removable bases make removing/servicing/securing/installing high-value marine electronics easier than ever. Four captive knobs for easy and quick release without fear of losing a knob.Note: The black knobs are captive so they will not fall off.

Read more less

APEX Surface Mount for Starlink Standard Gen 3 Antenna - BlackThe Seaview APEX APXG3DMV2 is a direct surface mount kit tailored for the Starlink Standard Gen 3 Antenna, specifically engineered for the demanding marine environment. Its suitability for marine conditions makes it perfect for any other outdoor use, such as on RVs, overland vehicles, vans, jeeps, UTVs, trucks, and more. The design incorporates a slight angle to the Starlink antenna to facilitate moisture runoff.The two end caps are crafted from machined marine-grade high-density polyethylene, offering an exceptional finish and corrosion resistance. These end caps are secured to black hard-anodized aluminum strips, providing superior strength to firmly hold the Gen 3 antenna on any flat surface.The Starlink Standard Gen 3 antenna now features a convenient pressure-fit kickstand for placement on flat non-mobile surfaces. However, when mounting to a vehicle or other fast moving vessel, it necessitates additional support. Opting for the Seaview APXG3DMV2 mount is a superior choice, offering a reliable and easily assembled mounting solution.The APXG3DMV2 also includes one of Seaview's CG2090W horizontal cable seals for waterproof cable entry. This seal can be placed either beneath the antenna or externally, depending on your needs. Specifications: Type: Mounting Brackets Box Dimensions: 4"H x 4"W x 26"L WT: 4.2 lbs UPC: 850047035981

Read more less

5" Modular Mount FWD Raked 7" x 7" Base Plate - Top Plate RequiredThis Seaview Modular Radar Mount works with 18" - 24" closed dome radars. The modular design allows you to add various accessories and different top plates at any point, thus making it a cost effective choice. Modular Top PlateA Seaview Modular Top Plate is required to mount a radar, satellite dome, camera or search light, and is sold separately.Modular DesignThe modular design allows the user to not have to replace the entire mount when a different radar or satdome is used. Instead the user can just replace the top plate.Compact DesignSpecifically designed to not take up a large amount of space results in the perfect solution where space saving is a must. Specifications: Type: Forward Leaning Mount Height: 5" Box Dimensions: 7"H x 12"W x 12"L WT: 5.9 lbs UPC: 839662008938 Quick Guide (pdf)

Read more less

Performance Gen 3 Starlink Antenna Mount with 8 Degree Wedge Base - BlackThe Seaview SRM300WB8 surface mount for the Starlink Performance Gen 3 Antenna has been specifically designed for the harsh marine environment. If it's good for the marine environment, then it's ideal for any other outdoor application (RVs, overland vehicles, vans, jeeps, side-by-sides, UTVs, trucks, etc.).The SRM300WB8 kit includes a Starlink Performance Gen 3 adapter plate (ADASPG3AP) and an 8° wedge base (SVSLWB). The wedge base has pre-drilled mounting holes for easy hardware fastening and is drilled and tapped for the included CG30PW cable seal, ensuring a watertight and secure installation without the need to cut Starlink connectors.The aluminum wedge base has a 3-part polyurethane prime and powder coat to ensure the best possible finish and corrosion resistance.

Read more less

Starlink Performance Gen 3 Adapter Plate for Use with Seaview or Starlink Angled Wedge Base - BlackThe Seaview ADASPG3AP adapter plate has been specifically designed to securely mount the Starlink Performance Gen 3 Antenna to the angled wedge base originally used for the Starlink Performance Gen 2 (formerly the Flat High Performance antenna).*Note this is the adapter plate only, the angled wedge base and Starlink antenna are not included.*This adapter plate has pre-drilled mounting holes and threaded inserts to easily adapt the new Starlink Performance Gen 3 to Starlink's grey angled wedge base or Seaview's angled wedge base (SVSLWB & SVSLWBBLK).

Read more less

Gen 3 Standard Starlink Antenna Mount with 8 Degree Wedge Base - BlackThe Seaview SRM200WB8 Mount for the Gen 3 Standard Starlink Antenna (sometimes Gen 4 / Standard) has been specifically designed for the harsh marine environment. If it's good for the marine environment, then it's ideal for any other outdoor application (RVs, overland vehicles, vans, jeeps, side by side, UTV, trucks, etc.). The base aluminum plate has a 3-part polyurethane prime and powder coat, and the end pieces are made using machined marine-grade high-density polyethylene to ensure the best possible finish and corrosion resistance.The Gen 3 Standard Starlink Antenna (sometimes Gen 4 / Standard) features a convenient pressure-fit kickstand for placement on flat non-mobile surfaces. However, for marine or vehicle mounting, it necessitates additional support. Opting for the Seaview SRM200WB8 mount is a superior choice, offering a reliable and adaptable mounting solution. Wedge Base Features: Designed to fit the Starlink Flat High-Performance Antenna and Seaview SRM200W Mount for the Gen 3 Standard Starlink Antenna.  Pre-drilled mounting holes allow the hardware to fasten directly to the wedge. Drilled and tapped for the CG30PW (white) or CG30PB (black) cable seal that comes with each Seaview wedge base. No need to cut the Starlink connectors for installation. Available in white or black

Read more less

APT-LB-L1 PowerTower® Central Light Bar w/Integrated 360° White LED LightMaximize your Navlight performance.  Integrated light mount comes pre-fitted with a LED 360° all-round white light.Compatible With:Scanstrut aft leaning PowerTower® radar mountsFeatures: Perfect anchor / steaming light upgrade All mounting holes predrilled for easy retrofit installation No extra fastenings required Cables run internally via a watertight seal Technical Specifications: Range 2NM Input Voltage - 12V Material - Aluminum Height - 15.9" (404mm) Mount Position - Center In the Box: Light bar LED 360° all-round light - White Instruction manual *Sold as an Individual Specifications: Construction: Aluminum Height: 16 Type: Lights Box Dimensions: 5"H x 15"W x 22"L WT: 3 lbs UPC: 5060114798106 Brochure (pdf)

Read more less

APEX Surface Mount for Starlink Standard Gen 3 AntennaThe Seaview APEX APXG3DMV2 is a direct surface mount kit tailored for the Starlink Standard Gen3 Antenna specifically engineered for the demanding marine environment. Its suitability for marine conditions makes it perfect for any other outdoor use, such as on RVs, overland vehicles, vans, jeeps, UTVs, trucks, and more. The design incorporates a slight angle to the Starlink antenna to facilitate moisture runoff.The two end caps are crafted from machined marine-grade high-density polyethylene, offering exceptional finish and corrosion resistance. These end caps are secured to black hard-anodized aluminum strips, providing superior strength to firmly hold the Gen 3 antenna on any flat surface.The Starlink Standard Gen3 antenna now features a convenient pressure-fit kickstand for placement on flat non-mobile surfaces. However, when mounting to a vehicle or other fast moving vessel, it necessitates additional support. Opting for the Seaview APXG3DMV2 mount is a superior choice, offering a reliable and easily assembled mounting solution.The APXG3DMV2 also includes one of Seaview's CG2090W horizontal cable seals for waterproof cable entry. This seal can be placed either beneath the antenna or externally, depending on your needs.

Read more less

5" Modular Mount AFT Raked 7" x 7" Base Plate - Top Plate RequiredThis Seaview Modular Radar Mount works with 18" - 24" closed dome radars. The modular design allows you to add various accessories and different top plates at any point, thus making it a cost effective choice. Modular Top PlateA Seaview Modular Top Plate is required to mount a radar, satellite dome, camera or search light, and is sold separately.Modular DesignThe modular design allows the user to not have to replace the entire mount when a different radar or satdome is used. Instead the user can just replace the top plate.Compact DesignSpecifically designed to not take up a large amount of space results in the perfect solution where space saving is a must. Specifications: Type: Aft Leaning Mount Height: 5" Box Dimensions: 7"H x 12"W x 12"L WT: 6 lbs UPC: 839662008952 Quick Guide (pdf)

Read more less

8" Aluminum Wedge Mount for StarlinkIs your Boat Starlink Ready?Enhance the performance of your Starlink Flat High-Performance with our Aluminium 8° Wedge Mount which has been specifically designed for the marine environment. The mount works as a stand-alone wedge or is compatible with our Modular Dual PowerTower Range and SC103/4 Pole mounts.The Scanstrut Aluminium 8° Wedge Mount for Starlink High-Performance has been specifically designed for the marine environment. This versatile wedge can serve as a standalone option for mounting Starlink directly onto a boat's roof or deck. Additionally, it functions as an adapter plate, seamlessly integrating with our popular Modular Dual PowerTower range, making it ideal for multi-electronic installations on powerboats. It can also be used as a top plate in conjunction with our SC100 Pole Mount range, designed specifically for transom mounting on sailing boats, ensuring that your Starlink hardware is elevated to an optimal position while optimizing space onboard.Features: Designed to fit Starlink High-Performance. Pre-drilled mounting holes allow the hardware to fasten directly to the wedge. Built-in Scanstrut Cable Seal ensures a watertight installation. No need to cut the Starlink connectors for installation. Marine sealant is not required. Paint finishes comply with our unique 4-step marine paint system. Constructed from the best marine-grade aluminum.

Read more less

APT-LB-GPS2-01 PowerTower® Center Mounted Light Bar and Wing Plate f/2 AntennaInstalls navigation light in the center and provides two (2) antenna mounts for maximum visibility and performance.Compatible with:Scanstrut aft leaning PowerTower® radar mountsFeatures: All mounting holes predrilled for easy retrofit installation, attach using mounting bolts, no extra fastenings required Cables run internally via a watertight seal Technical Specifications: Material - Aluminum  Height - 19.76" (502mm) Mount Position - Center In the Box: Light bar Instruction manual *Sold as an Individual Specifications: Construction: Aluminum Type: Light/GPS Brackets Height: 19.76 Box Dimensions: 4"H x 15"W x 18"L WT: 3.8 lbs UPC: 5060114795440 Quick Guide (pdf)

Read more less

Mast Mount Adapter KitCompatible WithCompatible with Z-Spars, Selden, Isomat, Eurospars MastsFor masts with an integral track at the front which makes it difficult to fit a Scanstrut Mast Mount.Features Fits all Scanstrut Mast Mounts Compatible with Z-Spars, Selden, Isomat, Eurospars Masts Materials Marine grade 6082 aluminium Polyester powder coated for a durable, gloss white finish Kit includes 4 x Adapter rings 1 x Complete fastening pack Specifications: Construction: Powder Coated Aluminum Type: Mast Mount Box Dimensions: 1"H x 7"W x 7"L WT: 1.2 lbs UPC: 5060114792685

Read more less

Modular Plate for Most Closed Dome and Open Array RadarsSeaview Modular Top Plates are designed to be mounted onto Seaview Modular Mounts. These Top Plates eliminate the "swiss cheese" look of most other radar and satdome mounts. With Seaview Top Plates the result is only four visible mounting screws to secure electronics.Unique DesignNo longer the unwanted “swiss cheese” look with a Seaview modular top plate. These plates result in only 4 visible mounting screws to secure electronics. A anodized 1/4" thick aluminum plate is pre-drilled to fit most marine electronics. This aluminum plate is then encased in a UV stable glass filled ABS white plastic. Each top plate is dimpled to match the provided drill templates for easy and precise drilling for your specific marine electronics. Specifications: Construction: Aluminum Type: Adapters Box Dimensions: 3"H x 13"W x 13"L WT: 4.6 lbs UPC: 839662009119 Quick Guide (pdf)

Read more less

Universal Mast Mount Platform for 12"18" RadomeSeaview Mast Mounts are designed to have the radar or satdome as close as possible to the mast. Ultra heavy duty mounting feet and rivets are used to secure the Mast Mount to the mast.AdjustableDesigned with fore and aft adjustable rails so that you can have the radar as close as possible to the mast.Incredible StrengthThe solid under body construction not only greatly improves strength but also hides radar cables. On certain models.AccessoriesPre-drilled under body allows for flood lights or horns to be mounted on certain models.Compatible Manufacturers: Furuno JRC Koden Lorenz Sitex VDO Specifications: Type: Mast Mount Box Dimensions: 5"H x 9"W x 17"L WT: 5.1 lbs UPC: 839662005234 Quick Guide (pdf)

Read more less

C5 Certified Light Bar Top with LTBLED12C5 Masthead Light & Threads for GPSUniversal light bar top for GPS or wind instrument with 12" light post and LED navigation light (LTBU1A + SVLTP12 + LTBLED12C5). Specifications: Height: 12" Type: Light/GPS Brackets Box Dimensions: 5"H x 9"W x 16"L WT: 2.2 lbs UPC: 850073256008

Read more less

Universal 24" Radar Mast PlatformSeaview Mast Mounts are designed to have the radar or satdome as close as possible to the mast. Ultra heavy duty mounting feet and rivets are used to secure the Mast Mount to the mast.AdjustableDesigned with fore and aft adjustable rails so that you can have the radar as close as possible to the mast.Incredible StrengthThe solid under body construction not only greatly improves strength but also hides radar cables. On certain models.AccessoriesPre-drilled under body allows for flood lights or horns to be mounted on certain models.Compatible Manufacturers: Furuno Garmin JRC Koden KVH Raymarine Simrad Sitex Specifications: Type: Mast Mount Box Dimensions: 7"H x 16"W x 21"L WT: 5.4 lbs UPC: 839662005227

Read more less

5" Aft Leaning Mount with ADAR1 Top PlateThis Seaview Modular Radar Mount works with 18" - 24" closed dome radars. The modular design allows you to add various accessories and different top plates at any point, thus making it a cost-effective choice. Included ADAR1 Top PlateSeaview Modular Top Plates are designed to be mounted onto Seaview Modular Mounts. These Top Plates eliminate the "Swiss cheese" look of most other radar and satdome mounts. With Seaview Top Plates the result is only four visible mounting screws to secure electronics. Specifications: Height: 5" Type: Aft Leaning Mount Box Dimensions: 10"H x 14"W x 14"L WT: 12.1 lbs UPC: 727908835588

Read more less

Complete Spreader Kit for Radars & Satdomes for Mounts Ending in M2This three-piece kit consists of a mid-section and two spreaders. Four bolts are used to secure each spreader to the midsection. The spreaders are tapered and angled aft so that whatever you decide to put on there will not interfere with the radar or satdome that you have on your mount. All the wiring from your GPS unit or antenna can be routed internally through the spreaders and into the mount itself. Not only does this help with security but it also makes for a very nice and clean installation. All the parts that make up the spreader kit are bolted together with rubber gaskets in between each part to prevent any water intrusion. Each spreader kit now comes with two S.S. 1-14 threaded adapters (SP7SS). Quick Guide (pdf)

Read more less

Complete Spreader Kit for Radars & Satdomes for Mounts Ending in M1This three-piece kit consists of a mid-section and two spreaders. Four bolts are used to secure each spreader to the midsection. The spreaders are tapered and angled aft so that whatever you decide to put on there will not interfere with the radar or satdome that you have on your mount. All the wiring from your GPS unit or antenna can be routed internally through the spreaders and into the mount itself. Not only does this help with security but it also makes for a very nice and clean installation. All the parts that make up the spreader kit are bolted together with rubber gaskets in between each part to prevent any water intrusion. Each spreader kit now comes with two S.S. 1-14 threaded adapters (SP7SS). Quick Guide (pdf)

Read more less

Mast MountsStill the first choice for boat owners the world over, Scanstrut Mast Mounts are the ultimate solution for mounting radars on yachts masts.Raising the antenna clear of any obstructions or interference, the mast mount is a classic and reliable installation.Features Easy and quick to install with all fastenings supplied Attached to mast by four swivel feet matching the profile of any mast 12 point fixing using highest quality Monel rivets for a secure installation Nylon washers for all fastenings to protect paint finish Waterproof cable grommet included to seal cable entry into mast Materials Marine grade 6082 aluminium Polyester powder coated for a durable and gloss white finish Kit includes 1 x Mast Mount 4 x Swivel mounting feet 1 x Complete fastening pack Fits:Furuno models: 1712,1715,1721,1722,1723,1724,1823,1824,DRS2DLowrance model: LRA 1500 Specifications: Construction: Powder Coated Aluminum Type: Mast Mount Box Dimensions: 5"H x 8"W x 17"L WT: 3.4 lbs UPC: 5060114790032 Quick Guide (pdf)

Read more less

CAM-PT-300-02 Aluminum PowerTower® for Cameras - 12"The ingenious Camera Power Mount solves the problem of finding a level mounting surface to install cameras onto your powerboat, commercial vessel, RIB or sailboat wheelhouse.Compatible with: FLIR - M100 / M200, M132, M232 cameras IRIS s118, s290, s295, s390, s395, s418 cameras Features: Designed to fit the most up to date cameras Pre-drilled mounting holes allow the camera to fasten straight to the PowerTower® No need to cut the cameras connectors off for installation  Constructed from Marine grade Aluminium Technical Specifications: Material - Aluminium Height - 11.81" (300mm) Mounting Type - Aft leaning - 25° In the Box: Mount Mounting hardware (excluding screws/bolts)  Installation manual *Sold as an Individual Specifications: Construction: Powder Coated Aluminum Type: Aft Leaning Mount Height: 12 Box Dimensions: 8"H x 8"W x 16"L WT: 6.1 lbs UPC: 5060114796188 Quick Guide (pdf)

Read more less

APT-F-150-01 Aluminum PowerTower® Radar Mount - 6" Forward LeaningThe Scanstrut Aluminum PowerTower is engineered for outstanding strength and with an unparalleled surface finish.  Manufactured using the best marine grade Aluminium, PowerTower® is molded as a single 'monocoque' structure with no joints, offering unparalleled strength and durability.Designed to install your radar on the roof, T-top, flybridge, or radar arch of your powerboat, providing the clearest view of the horizon allowing you to get the best performance from your radar in all conditions. By elevating your antenna clear of obstructions, PowerTower® maximizes the performance of your radar.There is a PowerTower® to fit pretty much every modern radar.Compatible with: B & G - HALO 20, 20+, 24 radars Garmin - Fantom 18, 24, GMR18HD, GMR18xHD, GMR24HD, GMR24xHD, GMR40 radars Humminbird - HB 2124 CHIRP radar KVH - TracPhone V3-HTS, M2, M3, TV3, V3 radars Lowrance - 3G/4G radars Raymarine - Quantum (Q24C), Quantum 2 (Q24D) radars Simrad - 3G/4G, DX45, DX60, DX54-S, GB40, NX40, NSE 8/12 radars Sitex - RADARpc 3.5/4.5 radars Features: Designed to fit the most up to date radars Pre-drilled mounting holes allow the radar to fasten straight to the PowerTower® No need to cut the radar’s connectors off for installation  Constructed from the best Marine grade Aluminium A range of accessories light bars can be bolted to the back of the PowerTower® Technical Specifications: Radar Type - Dome Material - Aluminium Height - 5.91" (150mm) Mounting Type - Forward leaning - 33° In the Box: Mount Mounting hardware (excluding screws/bolts)  Installation manual *Sold as an Individual Specifications: Construction: Aluminum Type: Forward Leaning Mount Height: 6 Box Dimensions: 8"H x 13"W x 16"L WT: 6.1 lbs UPC: 5060114796485 Quick Guide (pdf)

Read more less

Radome Plate 1 for Raymarine, Garmin, B&G, Lowrance DomesThe modular Dual PowerTower has been designed to allow your open array. radar, satdome and camera to be mounted together in one single space saving modular installation. Features:Radome plate 1 (Raymarine, Garmin, B&G, Simrad and Lowrance radomes)

Read more less

SC29 Radar Guard for M92722 for Use In Combination with Raymarine Quantum RadarPolished stainless steel guards protect radome from damage and reduce wear on the sails.Features: Mounted using radome bolts, no extra fastenings required Easy to fit – between mast mount and radar antenna Manufactured from marine grade 316 stainless steel Specifications: Type: Radar Guards Box Dimensions: 5"H x 25"W x 25"L WT: 5 lbs UPC: 5060114795693

Read more less

APT-F-250-02 Aluminum PowerTower® Radar Mount - 10" Forward LeaningThe Scanstrut Aluminum PowerTower is engineered for outstanding strength and with an unparalleled surface finish.  Manufactured using the best marine grade Aluminium, PowerTower® is molded as a single 'monocoque' structure with no joints, offering unparalleled strength and durability.Designed to install your radar on the roof, T-top, flybridge, or radar arch of your powerboat, providing the clearest view of the horizon allowing you to get the best performance from your radar in all conditions. By elevating your antenna clear of obstructions, PowerTower® maximizes the performance of your radar.There is a PowerTower® to fit pretty much every modern radar.Compatible with: Furuno - 1621, 1622, 1623, 1715, 1724, 1734, 1824, 1832, 1834, 1835, DRS2D, DRS2D-NXT, DRS42DL, DRS42DL+, DRS4D, DRS4D-NXT, DRS4W, 18" and 24" NavNet radars Humminbird - AS 21RD4KW radar Intellian - i1 radar Interphase - Mini RE-1, RE-8 radars JRC - 1000, 1000mk2, 1066, 1500, 1500mk2, 1800, 2000, JMA 2343 / 5104 (Radome: NKE-2042) radars Koden - 2kW 12" radar Lowrance - 3G/4G, LRA-1800 / RB714A / DX42, LRA-2400 HD radars Navman - 18" and 24" Series 8000 radars Nobletec - 2kW (20") radars Northstar - 18" and 24" M Series/8000i Seiwa - SWR-1, 8 and 9 radars Simrad - 3G/4G, GB40 / NX40/45 / NSE8/12 / RB712A / DX42S, GB40 / NX40/45 / NSE8/12 DX64S radars Sitex - MDS-1, 8, 12, NKE-1066 radars Techmarine - T-72.01, 72.02, 72.04 radars Features: Designed to fit the most up to date radars Pre-drilled mounting holes allow the radar to fasten straight to the PowerTower® No need to cut the radar’s connectors off for installation  Constructed from the best Marine grade Aluminium A range of accessories light bars can be bolted to the back of the PowerTower® Technical Specifications: Radar Type - Dome Material - Aluminium Height - 9.84" (250mm) Mounting Type - Forward leaning - 33° In the Box: Mount Mounting hardware (excluding screws/bolts)  Installation manual *Sold as an Individual Specifications: Type: Forward Leaning Mount Construction: Aluminum Height: 10 Box Dimensions: 4"H x 8"W x 17"L WT: 2.5 lbs UPC: 5060114797727 Quick Guide (pdf)

Read more less

APT6003 Aluminum PowerTower® Open Array Radar Mount - 6" Aft Leaning Scanstrut Aluminium PowerTower® has been designed and engineered to install your Open Array on the roof, T-top, flybridge or radar arch of your powerboat, providing the clearest view of the horizon allowing you to get the best performance from your radar in all conditions. Compatible with: Furuno - 1762, 1932, 1934, 1942, 1944, 1954, 851, DRS12A (6'), DRS12A (4'), DRS25A (4'), DRS25A (6'), DRS4A, DRS6A / DRS6A X CLASS, DRS6A-NXT radars Garmin - GMR 1224 xHD2, 1226 xHD2, 2524 xHD2, 2526 xHD2, 404, 406, 424 xHD2, 624 xHDS2, 626 xHD2 radars JRC - JMA 2344 / 5106 / 5206 (4') and JMA 2344 / 5106 / 5206 (6') radars Navman - 8000 Series (8084/8120) 4" radars Onwa - KRA-3002/4001 radars Raymarine - 5S / 9S / RA1048HD / RA1048SHD, 7S / 11S / RA1072HD / RA1072SHD, Cyclone 3'/4'/6', Magnum 4' 4kW/12kW, Magnum 6' 4kW/12kW radars Simrad - HALO 3/4/6 Pulse radars Sitex - MDS - 10 (4'), 10 (5') and RADARpc - 3/54.5 radars Features: Designed to fit the most up to date open array radars from Garmin, Raymarine, Simrad and Furuno Pre-drilled mounting holes allow the open array to fasten straight to the PowerTower® Constructed from the best marine-grade aluminium Paint finishes complies with our unique 4 step marine paint system Technical Specifications: Radar Type - Open Array Material - Aluminum  Height - 5.91" (150mm) Mounting Type - Aft leaning - 25° In the Box: Mount Mounting hardware (excluding screws/bolts)  Installation manual *Sold as an Individual  Specifications: Construction: Aluminum Type: Aft Leaning Mount Height: 5.91 Box Dimensions: 8"H x 13"W x 13"L WT: 6 lbs UPC: 5060114796447 Quick Guide (pdf)

Read more less

APT-LB-01 PowerTower® Center Mounted Light BarInstalls navigation lights above the antenna for maximum visibility and performance.Compatible with:Scanstrut aft leaning PowerTower® radar mountsFeatures: All mounting holes predrilled for easy retrofit installation, attach using mounting bolts, no extra fastenings required Cables run internally via a watertight seal Technical Specifications: Material - Aluminum  Height - 25.4" (404mm) Mount Position - Center In the Box: Light bar Instruction manual *Sold as an Individual Specifications: Construction: Aluminum Type: Light/GPS Brackets Height: 25.4 Box Dimensions: 5"H x 16"W x 21"L WT: 3.7 lbs UPC: 5060114795426 Quick Guide (pdf)

Read more less

APT-250-01-B - Aluminum PowerTower® Radar Mount - 10" Aft Leaning - BlackThe Scanstrut Aluminum PowerTower® is engineered for outstanding strength and with an unparalleled surface finish.  Manufactured using the best marine grade Aluminium, PowerTower® is molded as a single 'monocoque' structure with no joints, offering unparalleled strength and durability.Designed to install your radar on the roof, T-top, flybridge or radar arch of your powerboat, providing the clearest view of the horizon allowing you to get the best performance from your radar in all conditions. By elevating your antenna clear of obstructions, PowerTower® maximizes the performance of your radar.There is a PowerTower® to fit pretty much every modern radar.Compatible with: B & G - HALO20, HALO20+, HALO24 radars Garmin - Fantom 18, 24, GMR18HD / 18xHD / 18HD+, GMR24HD / 24xHD, GMR40 radars Humminbird - HB 2124 CHIRP radar KVH - TracPhone V3-HTS, TracVision M2, M3, TV3, V3 radars Lowrance - 3G/4G radars Raymarine - QUANTUM (Q24C), QUANTUM 2 (Q24D), RD218, RD418/RD418HD, RD424/RD424HD radars Simrad - 3G/4G, DX45, DX60 / DX64-S, GB40 / NX40/45 / NSE8/12 radars Sitex - RADARpc - 4D radar Features: Designed to fit the most up to date radars Pre-drilled mounting holes allow the radar to fasten straight to the PowerTower® No need to cut the radar’s connectors off for installation  Constructed from the best Marine grade Aluminium Range of accessories light bars can be bolted to the back of the PowerTower® Technical Specifications: Radar Type - Dome Material - Aluminium Height - 9.84" (250mm) Mounting Type - Aft leaning - 25° In the Box: Mount Mounting hardware (excluding screws/bolts)  Installation manual *Sold as an Individual  Specifications: Construction: Aluminum Type: Aft Leaning Mount Height: 9.84 Box Dimensions: 11"H x 13"W x 13"L WT: 7 lbs UPC: 5060114797697 Quick Guide (pdf)

Read more less

APT-F-250-01 Aluminum PowerTower® Radar Mount - 10" Forward LeaningThe Scanstrut Aluminum PowerTower is engineered for outstanding strength and with an unparalleled surface finish.  Manufactured using the best marine grade Aluminium, PowerTower® is molded as a single 'monocoque' structure with no joints, offering unparalleled strength and durability.Designed to install your radar on the roof, T-top, flybridge, or radar arch of your powerboat, providing the clearest view of the horizon allowing you to get the best performance from your radar in all conditions. By elevating your antenna clear of obstructions, PowerTower® maximizes the performance of your radar.There is a PowerTower® to fit pretty much every modern radar.Compatible with: B & G - HALO 20, 20+, 24 radars Garmin - Fantom 18, 24, GMR18HD, GMR18xHD, GMR24HD, GMR24xHD, GMR40 radars Humminbird - HB 2124 CHIRP radar KVH - TracPhone V3-HTS, TracVision M2, M3, TV3, V3 radars Lowrance - 3G/4G radars Raymarine - Quantum (Q24C), Quantum 2 (Q24D), RD218, RD418/RD418HD, RD424/RD424HD radars Simrad - 3G/4G, DX45, DX60, DX54-S, GB40, NX40, NSE 8/12 radars Sitex - RADARpc 4D radar Features: Designed to fit the most up to date radars Pre-drilled mounting holes allow the radar to fasten straight to the PowerTower® No need to cut the radar’s connectors off for installation  Constructed from the best Marine grade Aluminium A range of accessories light bars can be bolted to the back of the PowerTower® Technical Specifications: Radar Type - Dome Material - Aluminium Height - 9.84" (250mm) Mounting Type - Forward leaning - 33° In the Box: Mount Mounting hardware (excluding screws/bolts)  Installation manual *Sold as an Individual Specifications: Construction: Aluminum Type: Forward Leaning Mount Height: 10 Box Dimensions: 13"H x 14"W x 15"L WT: 7.5 lbs UPC: 5060114796492 Quick Guide (pdf)

Read more less

APT-250-01 - Aluminum PowerTower® Radar Mount - 10" Aft LeaningThe Scanstrut Aluminum PowerTower is engineered for outstanding strength and with an unparalleled surface finish.  Manufactured using the best marine grade Aluminium, PowerTower® is molded as a single 'monocoque' structure with no joints, offering unparalleled strength and durability.Designed to install your radar on the roof, T-top, flybridge or radar arch of your powerboat, providing the clearest view of the horizon allowing you to get the best performance from your radar in all conditions. By elevating your antenna clear of obstructions, PowerTower® maximizes the performance of your radar.There is a PowerTower® to fit pretty much every modern radar.Compatible with: B & G - HALO20, HALO20+, HALO24 radars Garmin - Fantom 18, 24, GMR18HD / 18xHD / 18HD+, GMR24HD / 24xHD, GMR40 radars Humminbird - HB 2124 CHIRP radar KVH - TracPhone V3-HTS, TracVision M2, M3, TV3, V3 radars Lowrance - 3G/4G radars Raymarine - QUANTUM (Q24C), QUANTUM 2 (Q24D), RD218, RD418/RD418HD, RD424/RD424HD radars Simrad - 3G/4G, DX45, DX60 / DX64-S, GB40 / NX40/45 / NSE8/12 radars Sitex - RADARpc - 4D radar Features: Designed to fit the most up to date radars Pre-drilled mounting holes allow the radar to fasten straight to the PowerTower® No need to cut the radar’s connectors off for installation  Constructed from the best Marine grade Aluminium Range of accessories light bars can be bolted to the back of the PowerTower® Technical Specifications: Radar Type - Dome Material - Aluminium Height - 9.84" (250mm) Mounting Type - Aft leaning - 25° In the Box: Mount Mounting hardware (excluding screws/bolts)  Installation manual *Sold as an Individual  Specifications: Construction: Aluminum Type: Aft Leaning Mount Height: 9.84 Box Dimensions: 11"H x 13"W x 13"L WT: 7.8 lbs UPC: 5060114795419 Quick Guide (pdf)Brochure (pdf)

Read more less

SC27 Radar GuardPolished Stainless Steel Guards Protect Radome from damage and reduce wear on the sails.Features: Mounting using radome bolts, no extra fastenings required Easy to fit - between mast mount and radar antenna Manufactured from marine grade 316 stainless steel Compatible Devices: SC20 M92722 Specifications: Construction: Stainless Steel Type: Radar Guards Box Dimensions: 4"H x 23"W x 23"L WT: 4 lbs UPC: 5060114790193

Read more less

APT-F-150-02 Aluminum PowerTower® Radar Mount - 6" Forward LeaningThe Scanstrut Aluminum PowerTower is engineered for outstanding strength and with an unparalleled surface finish.  Manufactured using the best marine grade Aluminium, PowerTower® is molded as a single 'monocoque' structure with no joints, offering unparalleled strength and durability.Designed to install your radar on the roof, T-top, flybridge, or radar arch of your powerboat, providing the clearest view of the horizon allowing you to get the best performance from your radar in all conditions. By elevating your antenna clear of obstructions, PowerTower® maximizes the performance of your radar.There is a PowerTower® to fit pretty much every modern radar.Compatible with: Furuno - 1621, 1622, 1623, 1715, 1724, 1734, 1824, 1832, 1834, 1835, DRS2D, DRS2D-NXT, DRS42DL, DRS42DL+, DRS4D, DRS4D-NXT, DRS4W, 18" and 24" NavNet radars Humminbird - AS 21RD4KW radar Intellian - i1 radar Interphase - Mini RE-1, RE-8 radars JRC - 1000, 1000mk2, 1066, 1500, 1500mk2, 1800, 2000, JMA 2343 / 5104 (Radome: NKE-2042) radars Koden - 2kW 12" radar KVH - TracVision M1 and TV1 radars Lowrance - 3G/4G, LRA-1800 / RB714A / DX42, LRA-2400 HD radars Majestic - SATMAR32 radar Navman - 18" and 24" Series 8000 radars Nobletec - 2kW (20") radars Northstar - 18" and 24" M Series/8000i Raymarine - 33STV radar Seiwa - SWR-1, 8 and 9 radars Simrad - 3G/4G, GB40 / NX40/45 / NSE8/12 / RB712A / DX42S, GB40 / NX40/45 / NSE8/12 DX64S radars Sitex - MDS-1, 8, 12, NKE-1066 radars Techmarine - T-72.01, 72.02, 72.04 radars Features: Designed to fit the most up to date radars Pre-drilled mounting holes allow the radar to fasten straight to the PowerTower® No need to cut the radar’s connectors off for installation  Constructed from the best Marine grade Aluminium A range of accessories light bars can be bolted to the back of the PowerTower® Technical Specifications: Radar Type - Dome Material - Aluminium Height - 5.91" (150mm) Mounting Type - Forward leaning - 33° In the Box: Mount Mounting hardware (excluding screws/bolts)  Installation manual *Sold as an Individual Specifications: Type: Forward Leaning Mount Construction: Aluminum Height: 6 Box Dimensions: 8"H x 10"W x 12"L WT: 4.05 lbs UPC: 5060114797741 Quick Guide (pdf)

Read more less

6" Aluminum PowerTower Mount for StarlinkEngineered for Starlink Flat High-Performance 150mm (6”) high and constructed from the best marine-grade aluminum, designed to fit Starlink's Flat High-Performance Model.Install your Starlink with precision on the roof, T-top, flybridge, or radar arch of your powerboat. It guarantees obstacle clearance and positions your Starlink at an ideal 8° angle for optimal connectivity. Designed for the harsh marine environment, it's tailored to fit Starlink High-Performance. Pre-drilled mounting holes allow secure fastening directly to the tower, while the built-in Scanstrut Cable Seal ensures a watertight installation, eliminating the need to remove Starlink connectors during installation. The paint finishes adhere to our exclusive 4-step marine paint system, and it's crafted from premium marine-grade aluminum.Features: Designed to fit, designed to fit Starlink High-Performance. Pre-drilled mounting holes allow Starlink to fasten straight to the PowerTower No need to cut the cable connectors off for installation  Marine sealant is not required Paint finishes comply with our unique 4-step marine paint system A range of accessories light bars can be bolted to the back of the PowerTower

Read more less

Camera Plate 2 for FLIR m100/200 Thermal Imaging CamerasThe modularDual Power Tower has been designed to allow your open array. radar, satdome and camera to be mounted together in one single space saving modular installation. Specifically for Camera plate 2 (FLIR M100/200 Thermal Imaging Cameras)  Specifications: Construction: Powder Coated Aluminum Type: Adapters Box Dimensions: 4"H x 9"W x 9"L WT: 1.65 lbs UPC: 5060114796379

Read more less

WD-RAD-01 Top Plate f/PowerTower® Radar Mounts - 4°Enhance the performance of your radome with the rugged, marine-grade, UV stable wedge that angles the radar down 4° below horizontal to provide a level horizon for your radar when the boat is underway.Mounts between PowerTower® mount and base of radar.Compatible with: Garmin - Fantom 18, 24, GMR18HD / 18xHD / 18HD+, GMR24HD / 24xHD, GMR40 radars Humminbird - AS 21RD4KW, HB 2124 CHIRP radars Lowrance - HALO20, HALO20+, HALO24, LRA-1800 / RB714A / DX42, LRA-2400 HD radars Raymarine - QUANTUM (Q24C), QUANTUM 2 (Q24D), RD218, RD418/RD418HD, RD424/RD424HD radars Simrad - DX45, DX60 / DX64-S, GB40 / NX40/45 / NSE8/12, GB40 / NX40/45 / NSE8/12 / RB712A / DX42S, GB40 / NX40/45 / NSE8/12 DX64S radars Sitex - MDS-12 radar Features: Enhance the performance of your radome with the Universal Scanstrut 4° radar base wedge 4° Base Wedge for mounting under PowerTower® A rugged, marine-grade, UV stable wedge  Compatible with radomes from most radar manufacturers Technical Specifications: Material - Marine Grade Polymer Dimensions (L x W ) - 11.10" x 9.09" Angle - 4° In the Box: Wedge Base seal Instruction manual *Sold as an Individual Specifications: Construction: Polymer Type: Wedges Height: N/A Box Dimensions: 2"H x 9"W x 11"L WT: 2 lbs UPC: 5060114795945 Quick Guide (pdf)

Read more less