Hydraulic Steering Fluid - QuartThis is a perfect formulation for the most demanding marine environments. Engineered for use in all hydraulic steering solutions.Features: Applications: All Hydraulic Steering Systems High viscosity index Corrosion inhibited Oxidation resistant Excellent anti-wear performance Specifications: Size: Quart Type: ISO 15 Low Temp Mineral Hydraulic Fluid

Read more less

ATLAS FingerFlex Blinker Trim Control for Hydraulic Helms - Single Control SwitchUPDATED DESIGN: FingerFlex "Blinker Style" Steering Wheel Trim SwitchT-H Marine offers the answer to convenient trim control for hydraulic helms - FingerFlex. Simple and easy to install, this unit can be added to any boat with only a moderate amount of difficulty.FingerFlex incorporates "Positive Clicking" technology that provides a positive touch and feel so, unlike similar systems, you know when your trim is operating and that's important when you really need it!FingerFlex can be installed on the right or left side of the bezel or both for dual controls. It can also be used to control hydraulic jack plates in addition to tilt and trim systems. Versions are also available to fit most mechanical steering systems.Features: The Ultimate in Trim Control for Hydraulic Helms Positive clicking technology for positive touch Operates engine trim and/or jack plates Fits hydraulic, cable, and tilt steering Easy installation Specifications: "Blinker" style switches allow quick and easy trim control Available in single or dual configurations

Read more less

Steering Cable Boot Durable molded rubber boot protects the output end of all standard steering cables keeping dirt, debris and moisture out extending the service life of the cable. Includes two cable tie style clamps. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

PROTECH 2.1 Front Mount Tilt OB Hydraulic System - Includes UP28T Helm Pump, Oil, UC128TS-2 Cylinder, & X52 Tilt - No HosesDurability and performance define the Protech front mount outboard steering package. From the stainless steel helm shaft, heavy-duty shaft seals, carbon steel piston, and 304 electropolished and passivated stainless link assemblies, the Protech is built for maximum longevity and peak performance. Adjustable boss-style fittings allow precise hose routing without the risk of breaking the fittings by overtightening or leaking fittings from loosening during installation, a common problem on competing cylinders. Kit Contains: UP28T helm pump X52 Tilt Mechanism UC128TS Front Mount Outboard Cylinder OIL 15 Hydraulic oil - 2 quarts Kit F (remote fill adapter for rear mount and tilt mount pumps) *Hoses and the wheel are not included

Read more less

Rudder Position IndicatorAwareness of the rudder angle is an important safety factor. This is especially true while moving in and out of your berth, drawing alongside another boat, picking up a skier, mooring, or any other "close call" situation. Davis' Rudder Position Indicator gives instant visual reference of rudder angle.The pointer swings a full thirty degrees with each revolution of the wheel. Mounts directly to your hub (approximately 2" (5 cm) in diameter) with a self-adhesive pad . Rugged, hermetically sealed, weatherproof, and sunproof housing ensures long life. No cables, adjustments, or electricity required; gravity power makes it simple and service-free. Suitable for boats with mechanical and single station hydraulic steering systems. Specifications: Instrument Function: Wind Box Dimensions: 1"H x 5"W x 8"L WT: 0.1 lbs UPC: 011698038503 Owner's Manual (pdf)

Read more less

Union T-Fitting f/3/8" Tube Compression Hose FittingsUnion T-Fitting for 3/8" TubeTypical Applications: T-Fitting for 3 standard 3/8" compression thread hose fittings Specifications:3/8 COMP FITTING ALL Sides = 9/16 - 24 UNEF 2A

Read more less

Single Lever Side Mount Control - Black/ChromeFeatures: Enables easy and safe shifting by preventing accidental gear engagement unless the engine is idling Can be installed horizontally or vertically, on the starboard or port side of the boat Provided with a brake tension release system adjustable from outside Pull-out handle disengages shift for warm-up Neutral safety switch X12 - 34543 Q (optional) prevents in-gear starting Exceeds EN ISO 11547 standards when X12 safety switch is installed

Read more less

M66 Fast Connect Rotary Steering CableSteering Helm: Ultraflex T71FC T72FC - T73NR FC T81FC - T82FC T83NR FC Teleflex Safe TQC/NFB Morse D290Ultraflex year 2001 and prior: T71 - T72 - T73NR T74NR - T81 - T82 T83NR - T84NR Length: 14 Feet Specifications: Cable Length (Feet): 14' Box Dimensions: 3"H x 18"W x 28"L WT: 7.5 lbs UPC: 702755017127

Read more less

1 Quart Hydraulic Oil - Use with all Uflex Hydraulic Steering Systems.

Read more less

90° 3/8 NI Plate Comp FittingTypical Application:90° fitting from bulkhead fitting to 3/8" compression hose Specifications: 3/8 COMP FITTING Fitting Side =  9/16 - 24 UNEF 2B Hose Side =  9/16 - 24 UNEF 2A

Read more less

G87 Rack & Pinion Front Mount Helm 3.7" Stroke 3.3 Turns Lock-To-Lock 3/4" TaperFeatures: High-Efficiency Rack & Pinion Steering System Compatible with SSC134, SSC135, and SSC154 competing cables and SH91610p helm Kit Includes:G87 Front Mount HelmPerformance Components: All stainless steel cable output ends Made of corrosion-resistant materials Standard 3/4" tapered shaft 3.7" cable stroke 3.3 turns lock-to-lock 7.9" cable bend radius

Read more less

Tilt Mechanism for L6 Power SteeringTilt mechanism with a range of 48° and five locking positions, suitable for Masterdrive TM steering systems.

Read more less

UPMD MasterDrive Power Unit1 UPMD Power Unit, 15' (4.5M) wiring harness includedFeatures: 12VDC Motor 45° swiveling fittings for easy installation Semitransparent 0,5 liter (0.11gal) tank gives immediate oil level vision Vented filler plug Suitable for applications with autopilot Bulkhead or floor mount Black galvanized motor case, saltwater resistant 4,5 m (15’) Wiring Harness included IP67 waterproof Ignition protected (SAE J-1171 and UNI EN 28846)

Read more less

MasterDrive UCMD – User InterfaceFeatures: Safety switch ON/OFF (SMART BUTTON) Three different power levels with light indicator (PATENTED) Motor temperature visual indicator Twin-engine key selection included Lighted panel for stand-by position Plug-in wiring harness Suitable for a second station installation 7m (23') panel extension cable also available – 42636L This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

UP39 Rear Mount HelmSpecifications: Mounting: Rear Mount Displacement/Revolution: 39 cc - 2.4 cubic inches No. of Pistons: 7 Relief Valve Setting: 70 Bar - 1000 PSI Maximum Wheel Diameter: 710mm - 28" Weight: 5 kg - 11 lbs.

Read more less

UC128 Version 1 Hydraulic Cylinder - PortThe UC128TS-1P is the Port version of the Protech Front Mount Steering Cylinder. It is used along with the standard cylinder in high horsepower dual engine applications. It shares all of the innovation and attributes of the standard Protech cylinder. Durability and performance define the Protech Front Mount Outboard Steering Cylinders. Features: The replaceable triple sealed 1 3/4" cylinder end cartridges offer industry-leading longevity and durability Designed for up to 600HP in certain applications 304 electropolished and passivated link assembly for peak corrosion resistance Carbon-steel piston allows less internal bypass and provides greater efficiency Ultrabolt high-strength stainless steel tiller bolt

Read more less

Tee Fitting with Bleed Nipple for IB & Stern Drive CylindersBleed fitting for all inboard and stern drive cylinders.Specifications: 1/4 NPT to 3/8 COMP FITTING Cylinder Side = 1/4 NPT Hose Side = 9/16 - 24 UNEF 2A

Read more less

UC95OBF-1 Hydraulic Cylinder 175HP or LessIntended for single engine applications of 175 HP and under, the UC95 OBF-1 cylinder is compatible with competing helms, hoses, and oil, and is built to last with heavy-duty stainless steel cylinder rods, seals, and link assemblies.Features: Balanced the number of turns lock-to-lock is the equal port to starboard or vice-versa Adjustable boss style fittings for easy installation High resistance stainless steel connection bolt (ULTRABOLT)  Constructed of top-grade materials this cylinder is simple to install and fits almost every two and four-stroke outboard engine on the market our engine Split and pinned mounting rod for easy installation and bushings to prevent friction with engine Brochure (pdf)

Read more less

M90 Mach Rotary Steering Cable - 14'The M90 Mach 14' Rotary Blue Case Steering Cable. Specifications: Cable Length (Feet): 14' Box Dimensions: 3"H x 18"W x 27"L WT: 7.5 lbs UPC: 702755044079

Read more less

Complete Boss Fitting Typical Application:Bleed fitting for all outboard cylindersSpecifications: ORB, Size #6 to 3/8 COMP FITTING Cylinder Side = 9/16 - 18 UNF 2A Hose Side = 9/16 - 24 UNEF 2A

Read more less

UP28R Rear Mount Helm 1.7 cu. 3/4" Tapered Stainless Steel ShaftFeatures: Available in four different displacement sizes Compact design Ball bearing piston race Built-in lock valve for positive rudder lock Integral relief valve for over-pressure protection 3/4” tapered stainless steel shaft Easily accessible lock valve and shaft seal for replacement Cast iron cylinder rotor for greater durability and longer life 1/4" NPT fitting for 3/8" tube Includes 90° adjustable fittings for 3/8” tube and white bezel UP45R pump is ideal for double cylinder outboard applications UP45 pump is available also for inboard application X68 (optional) - 40894Z Chrome bezel KITF (optional) - 39664Y Remote fill adapter Specifications: Mounting: Retro-cruscotto Displacement/Revolution: 28 cc-1.7 cu in # of Pistons: 5 Relief Valve Setting: 70 Bar - 1000 PSI Maximum Wheel Diameter: 710mm - 28" Weight: 5kg - 11 lbs.

Read more less

T-Fitting Assembly  - ORF HoseTypical Application:Used to replace the boss fitting in new outboard cylinders when trying to connect to 'O' ring face seal hosesSpecifications: ORB, Size #6 to 3/8 COMP FITTING Cylinder Side = 9/16 - 18 UNF 2A Hose Side = 9/16 - 24 UNEF 2A

Read more less

UC94 Spacer KitSpacer kit for UC94 Cylinder

Read more less

90° Adjustable Fitting for Back of UP Series HelmsTypical Application:Fitting for the back of the UP series helmsSpecifications: ORB, Size #6 to 3/8 COMP FITTING Helm Side = 9/16 - 18 UNF 2A Hose Side = 9/16 - 24 UNEF 2A

Read more less

Brass Plug w/O-Ring for PumpsTypical Application:Compensating line brass plug of the UP series helmsSpecifications: 1/4 NPT PLUG Helm Side = 1/4 NPT

Read more less

M66 Fast Connect Rotary Steering CableSteering Helm: Ultraflex T71FC T72FC - T73NR FC T81FC - T82FC T83NR FC Teleflex Safe TQC/NFB Morse D290Ultraflex year 2001 and prior: T71 - T72 - T73NR T74NR - T81 - T82 T83NR - T84NR Length: 12 Feet Specifications: Cable Length (Feet): 12' Box Dimensions: 3"H x 18"W x 23"L WT: 6.75 lbs UPC: 702755017103

Read more less

M66 Fast Connect Rotary Steering Cable - UniversalSteering Helm: Ultraflex T71FC T72FC - T73NR FC T81FC - T82FC T83NR FC Teleflex Safe TQC/NFB Morse D290Ultraflex Year 2001 & Prior: T71 - T72 - T73NR T74NR - T81 - T82 T83NR - T84NR *Length: 9 Feet Specifications: Cable Length (Feet): 9' Box Dimensions: 3"H x 13"W x 28"L WT: 5.65 lbs UPC: 702755017073

Read more less

M66 Fast Connect Rotary Steering CableSteering Helm: Ultraflex T71FC T72FC - T73NR FC T81FC - T82FC T83NR FC Teleflex Safe TQC/NFB Morse D290Ultraflex year 2001 and prior: T71 - T72 - T73NR T74NR - T81 - T82 T83NR - T84NR Length: 15 Feet Specifications: Cable Length (Feet): 15' Box Dimensions: 3"H x 18"W x 28"L WT: 7.85 lbs UPC: 702755017134

Read more less

UP28F - Front Mount Helm PumpFeatures: Compact design Ball bearing piston race Built-in lock valve for positive rudder lock Integral relief valve for over-pressure protection 3/4" tapered stainless steel shaft Easily accessible lock valve and shaft seal for replacement Cast iron rotor for greater durability and longer life 1/4" NPT fitting for 3/8" tube Complete with elbow fittings 5 pistons

Read more less

HYCO 1.1 Front Mount OB System up to 175HP - Includes UP20 FM Helm, 2qts of Oil, UC95-OBF CylinderFeaturing the unique split tilt tube rod that allows for installation of the UC94 cylinder without removing the engine, the Hyco is an easy and affordable outboard hydraulic steering solution for boats with 150 horsepower and under. Coupled with the composite UP20 helm, the Hyco offers effortless steering with 5 turns lock to lock. And, it is applicable to almost all 2 and 4 stoke outboards engines.Kit Contains: UP20 FM Helm UC95-OBF cylinder OIL 15 - 2 Quarts

Read more less

ROTECH™ STEERING SYSTEMROTECH - X18T71FC - helm X34 - 90° bezel M66 - 18' steering cable UFLEX ROTARY STEERING SYSTEMS PACKAGED IN A BOX: A convenient kit form, especially suitable as replacement steering, that includes helm, bezel and cable.FEATURES AND TECHNICAL SPECIFICATIONS: Fast connect, simple installation All stainless steel cable output ends Corrosion resistant materials Particulary suitable where clearance is limited Standard 3/4" tapered shaft Lock-to-lock steering wheel turns: approx. 3,8 Stroke: 9" (228 mm) Maximum allowable steering wheel diameter: 16" (406 mm) Minimum steering cable bend radius: 7.9" (200 mm) Minimal feedback Compact for mounting T71FC steering system is not to be used on boats quipped with engines that exceed the maximum horsepower rating of the boat For boats faster than 50 mph the twin cable steering system T72FC is recommended Exceeds EN 28848 safety standards Exceeds ABYC P17 safety standards **The wheel is not included Specifications: Cable Length (Feet): 18' Box Dimensions: 2"H x 5"W x 5"L WT: 31.4 lbs UPC: 702755019855

Read more less

XPS G2 Hydraulic Power Steering System V2 without HosesDon’t get left behind…take advantage of the ease, control, and power of GEN 2, the most advanced XPS Power Steering yet!The Panther XPS G2 Power Steering System is a hybrid system that combines the durability and dependability of cable steering with the ease of automobile-like power steering. The Panther XPS G2 gradually reverts to cable steering in case of hose failure, steering fluid leak, or power loss to the pump, so you’re NEVER without steering. Engineered to make steering your boat as effortless as the vehicle you drive. No matter the vessel you operate, XPS offers affordability, confidence, fit, and all-around ease of operation.Panther backs up products with a warranty to give you confidence and peace of mind.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

M90 Mach Rotary Steering Cable - 10'The M90 Mach 10' Rotary Blue Case Steering Cable. Specifications: Cable Length (Feet): 10' Box Dimensions: 3"H x 18"W x 27"L WT: 6 lbs UPC: 702755044031

Read more less

M66 Fast Connect Rotary Steering CableSteering Helm: Ultraflex T71FC T72FC - T73NR FC T81FC - T82FC T83NR FC Teleflex Safe TQC/NFB Morse D290Ultraflex year 2001 and prior: T71 - T72 - T73NR T74NR - T81 - T82 T83NR - T84NR Length: 19 Feet Specifications: Cable Length (Feet): 19' Box Dimensions: 3"H x 18"W x 28"L WT: 9.1 lbs UPC: 702755017172

Read more less

PROTECH 2.1 Front Mount OB Hydraulic System - Includes UP28 FM Helm, Oil & UC128-TS/2 Cylinder - No HosesDurability and performance define the Protech front mount outboard steering package. From the stainless steel helm shaft, heavy duty shaft seals, carbon steel piston and 304 electropolished and passivated stainless link assemblies, the Protech is built for maximum longevity and peak performance. Adjustable boss style fittings allow precise hose routing without the risk of breaking the fittings by overtightening or leaking fittings from loosening during installation, a common problem on competing cylinders. Kit Contains: UP28 F Front mount helm pump UC128-TS/2 Cylinder Front mount outboard cylinder OIL 15 Hydraulic oil - 2 quarts The wheel is not included

Read more less

SilverSteer UC128TS High Performance Cylinder V2P with Offset Link Arm - Port VersionSpecially designed for high-performance, high-torque applications, the SilverSteer™ UC128TS cylinder is recommended for bass boats, flats boats, and tournament fishing boats. Compatible with competing helms, hoses, and oil, the UC128TS is built to last with a heavy-duty stainless steel cylinder rod, seals, and link assemblies. Simple to install and fits almost every 2- and 4-stroke outboard engine on the market.Features: Type 2 offset link arm Link arm attached to the port side of the cylinder Please note that P/N: UC128TS-SVS 2P is a direct replacement of P/N: UC128-SVS 2P. P/N: UC128TS-SVS 2P has the same cylinder, but it's easier to service.

Read more less

T4 Through Tilt Tube Electro Steer - SaltwaterA unique product to steer a kicker motor. Can be installed on any kicker motor that has a treaded tilt tube. No need to drill holes in your transom. Installs in minutes. 9″ minimum needed between main engine and kicker motor. Controlled by a 24′ cable and two-button handheld remote. Wireless option available.

Read more less

M90 Mach Black Rotary Steering Cable - 14'Uflex M90 Mach Rotary Steering Cable provides boat steering systems with increased flexibility and durability from top-quality materials and construction. M90 Mach cables use a patented design offering high efficiency and performance in mechanical steering systems.Features: Minimal feedback Fast connections for simple installation Ideal for long cable runs and tight bend applications - Minimum steering cable bend radius: 150 mm (5.9") Stainless steel cable output end featuring patented gasket (engine side) Specifications: Cable Length (Feet): 14' Box Dimensions: 3"H x 18"W x 28"L WT: 7.3 lbs UPC: 702755047964

Read more less

Kit OB - Hose Kit for Single Station InstallationConsists of a pair of high pressure hoses supplied with preassembled fittings on both ends.Length: 16 FeetFittings: ORFS Specifications: Cable Length (Feet): 16' Box Dimensions: 4"H x 14"W x 14"L WT: 3.05 lbs UPC: 702755053286

Read more less

HYTECH 1.1 Front Mount OB System up to 175HP - Includes UP20 FM Helm, 2qts of Oil, UC95-OBF Cylinder & 40' TubingThe HYTECH steering kit featuring the unique split tilt tube rod that allows for installation of the UC94 cylinder without removing the engine. The HYTECH is an easy and affordable outboard hydraulic steering solution for boats with 175 horsepower and under. Coupled with the composite UP20 helm, the HYTECH offers effortless steering with 5 turns lock to lock. And, it is applicable to almost all 2 and 4 stroke outboard engines. Kit Contains: UP20 FM Helm UC95-OBF cylinder OIL 15 - 2 Quarts 40' of cut to length tubing Brochure (pdf)

Read more less

1/4 NPT to 3/8 T-FittingTypical Application:Fitting used in the back of the previous version of the UP series helms before the boss fittingSpecifications: 1/4 NPT to 3/8 COMP FITTING Helm Side = 1/4 NPT Hose Side = 9/16 - 24 UNEF 2A

Read more less

ROTECH™ STEERING SYSTEMROTECH - X14T71FC - helm X34 - 90° bezel M66 - 14' steering cable UFLEX ROTARY STEERING SYSTEMS PACKAGED IN A BOX: A convenient kit form, especially suitable as replacement steering, that includes helm, bezel and cable.FEATURES AND TECHNICAL SPECIFICATIONS: Fast connect, simple installation All stainless steel cable output ends Corrosion resistant materials Particulary suitable where clearance is limited Standard 3/4" tapered shaft Lock-to-lock steering wheel turns: approx. 3,8 Stroke: 9" (228 mm) Maximum allowable steering wheel diameter: 16" (406 mm) Minimum steering cable bend radius: 7.9" (200 mm) Minimal feedback Compact for mounting T71FC steering system is not to be used on boats quipped with engines that exceed the maximum horsepower rating of the boat For boats faster than 50 mph the twin cable steering system T72FC is recommended Exceeds EN 28848 safety standards Exceeds ABYC P17 safety standards **The wheel is not included Specifications: Cable Length (Feet): 14' Box Dimensions: 2"H x 5"W x 5"L WT: 23.25 lbs UPC: 702755019619

Read more less

ROTECH™ STEERING SYSTEMROTECH - X12T71FC - helm X34 - 90° bezel M66 - 12' steering cable UFLEX ROTARY STEERING SYSTEMS PACKAGED IN A BOX: A convenient kit form, especially suitable as replacement steering, that includes helm, bezel and cable.FEATURES AND TECHNICAL SPECIFICATIONS: Fast connect, simple installation All stainless steel cable output ends Corrosion resistant materials Particulary suitable where clearance is limited Standard 3/4" tapered shaft Lock-to-lock steering wheel turns: approx. 3,8 Stroke: 9" (228 mm) Maximum allowable steering wheel diameter: 16" (406 mm) Minimum steering cable bend radius: 7.9" (200 mm) Minimal feedback Compact for mounting T71FC steering system is not to be used on boats quipped with engines that exceed the maximum horsepower rating of the boat For boats faster than 50 mph the twin cable steering system T72FC is recommended Exceeds EN 28848 safety standards Exceeds ABYC P17 safety standards **The wheel is not included Specifications: Cable Length (Feet): 12' Box Dimensions: 2"H x 5"W x 5"L WT: 26.3 lbs UPC: 702755019497

Read more less

Kit OB - Hose Kit for Single Station InstallationConsists of a pair of high pressure hoses supplied with preassembled fittings on both ends.Length: 10 FeetFittings: ORFS Specifications: Cable Length (Feet): 10' Box Dimensions: 4"H x 14"W x 14"L WT: 2.5 lbs UPC: 702755015888

Read more less

MasterDrive Steering System - Single Station Retrofit Kit - MasterDrive 40cc Tilt Mount Helm & UPMD Power Unit (No Cylinders Included)The MasterDrive power-assisted outboard steering system delivers effortless steering for the most demanding applications, regardless of speed or torque conditions.Features: Eliminates torque at the steering wheel Three different selectable levels of power give the driver the desired feeling on the wheel (PATENTED) Automatically reverts to manual mode in case of power loss High efficiency, low Amp draw, low noise Kit Includes: UH40-T - MasterDrive 40cc tilt mount helm  X66 - Tilt mechanism UCMD - MasterDrive user interface UPMD - MasterDrive power unit 12V DC OIL 15 - 4 quarts This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

Motor Well Boot - 5-1/2" Black accordion style seal organizes and protects engine control cables, wires or fuel lines. UV stabilized molded rubber. Includes mounting ring. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

UC81-OBF Front Mount Outboard CylinderUC81 OBF – Balanced: the number of turns lock-to-lock is equal port to starboard and vice-versa. Front-mount cylinder for outboard engines up to 115 hp. Replaceable end caps.Specifications: Volume: 81 cc - 4.9 cu. in Output force: 222 kg (489 lbs) Inside diameter: 27,4 mm (1.08") Stroke: 186 mm (7.3") Fittings for high-pressure flex hose: 3/8" Bleed fittings: DN5 quick connect

Read more less

UC128OBF Mounting HardwareMounting hardware for UC128TS Cylinder

Read more less