TM87 17' Rack & Pinion Steering CableFeatures: High-Efficiency Rack & Pinion Steering Cable Compatible with SSC134, SSC135, and SSCX154 competing cables and SH91610p helms Performance Components: All stainless steel cable output ends Made of corrosion-resistant materials 3.7" cable stroke 3.3 turns lock-to-lock 7.9" cable bend radius TM87 Steering Cables are not to be used on boats equipped with engines that exceed the maximum horsepower rating of the boat. Optional Steering Wheel. Exceeds ISO 8848 safety standards. Exceeds ABYC P17 safety standards. Universal replacement steering cable for standard and non-feedback Rack & Pinion Steering Systems. Fast, simple, easy cable installation: Universal replacement for standard, ZTF, and no feedback rotary helms

Read more less

Aluminum Inboard Cylinder - 1.25" Bore & 7" StrokeA hydraulic steering system consists of a steering pump, a cylinder tied to the rudder or the outboard or sterndrive engine, and the connecting hoses. Under normal operating conditions, a steering wheel turn will pump the oil, which flows in through the hoses to the cylinder, according to the turn direction.With the consequent cylinder movement, the oil will flow to the pump through the hoses and, at the same time, move the engine or the helm, which are connected to the cylinder. The pumps, equipped with a valve that prevents outgoing fluid from returning along the same hose, allow the operation of the steering systems with two or more steering stations. The cylinders are double-acting and may be balanced or unbalanced. This particular cylinder is a balanced cylinder with the same number of steering wheel turns to move the helm from the center to the end stroke in two opposite directions. A well-balanced steering system needs the correct choice of pump for the cylinder.This hydraulic cylinder for the inboard engine UC 116-I has been designed and manufactured to be used as a component in the hydraulic steering systems. The cylinder with a mobile rod is installed directly to the arm of the helm through the proper ball joint on the end part of the cylinder. On the opposite side, it is fixed directly to the boat through a support with the plate.Features:Balanced (the number of turns lock-to-lock is equal to port to starboard or vice versa)Specifications: Volume: 116 cc - 7 cu.in Torque: 58 kg (5043 lbs.) Output Force: 464 kg (1023 lbs) Owner's Manual (pdf)

Read more less

Hydraulic Steering Fluid - ISO 15 Marine Synthetic Blend - 32 ozDelivers smooth, responsive steering performance under extreme marine conditions. Designed for most outboard and inboard hydraulic steering systems in saltwater and freshwater environments. The synthetic blend with anti-corrosion and anti-wear additives helps protect components and extend system life.Features: Premium Synthetic Blend – Formulated with high-quality synthetic base oils for maximum performance. ISO 15 Viscosity Grade – Optimized for marine hydraulic steering systems requiring ISO 15 fluid. Anti-Corrosion Protection – Shields metal parts from rust and saltwater exposure. Anti-Wear Additives – Reduce friction and wear on seals, pistons, and pumps. Smooth Steering Response – Enhances control and responsiveness in all operating conditions. Compatible with Most Systems – Designed for use in Seastar®, BayStar®, Uflex®, and other hydraulic systems. Saltwater & Freshwater Safe – Resilient formulation performs in all marine environments. 1 Quart (32 oz) Bottle – Convenient size for topping off or full system fluid changes. Leak-Resistant Tip – Easy-pour spout for mess-free application. Trusted Marine Brand – Manufactured by Star brite, a leader in marine performance products. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

UC128 Version 1 Hydraulic CylinderCompatible with competing helms, hoses, and oil, the UC128 cylinder is built to last with heavy-duty stainless steel cylinder rods, seals, and link assemblies. Constructed of top-grade materials this cylinder is simple to install and fits almost every two and four-stroke outboard engine in the market. Balanced: The number of turns lock-to-lock is equal port to starboard or vice-versa. High resistance stainless steel connection bolt. Volume: 120cc: 7.3 cu. in Output Force: 450 kg - 992 lbs Inside Diameter: 35mm - 1.37" Stroke: 185mm - 7.28" 3/8" (9,5 mm fittings) - For high pressure flex hose Bleed Fittings: DN5 Quick connect

Read more less

Hydraulic Hose Kit 6' - Two Hoses with Bulkhead FittingsTwo high-pressure flexible hoses with pre-crimped nickel-plated fittings, bulkhead fittings (for KIT OB-BHBR only), and bend restrictors on one end. Application:Recommended for use with all Uflex helms with 1500 psi relief valvesSpecification:Hose Length (feet): 6’  Specifications: Cable Length (Feet): 6' Box Dimensions: 5"H x 14"W x 15"L WT: 2.55 lbs UPC: 702755025054

Read more less

M90 Mach Black Rotary Steering Cable - 18'Uflex M90 Mach Rotary Steering Cable provides boat steering systems with increased flexibility and durability from top-quality materials and construction. M90 Mach cables use a patented design offering high efficiency and performance in mechanical steering systems.Features: Minimal feedback Fast connections for simple installation Ideal for long cable runs and tight bend applications - Minimum steering cable bend radius: 150 mm (5.9") Stainless steel cable output end featuring patented gasket (engine side) Specifications: Cable Length (Feet): 18' Box Dimensions: 3"H x 17"W x 28"L WT: 9.2 lbs UPC: 702755052067

Read more less

TM87 10' Rack & Pinion Steering CableFeatures: High-Efficiency Rack & Pinion Steering Cable Compatible with SSC134, SSC135, and SSCX154 competing cables and SH91610p helms Performance Components: All stainless steel cable output ends Made of corrosion-resistant materials 3.7" cable stroke 3.3 turns lock-to-lock 7.9" cable bend radius TM87 Steering Cables are not to be used on boats equipped with engines that exceed the maximum horsepower rating of the boat. Optional Steering Wheel. Exceeds ISO 8848 safety standards. Exceeds ABYC P17 safety standards. Universal replacement steering cable for standard and non-feedback Rack & Pinion Steering Systems. Fast, simple, easy cable installation: Universal replacement for standard, ZTF, and no feedback rotary helms

Read more less

SilverSteer™ Front Mount Outboard Hydraulic Steering System w/ UC130-SVS-1 CylinderSpecifically designed for high performance and high torque applications, the SilverSteer features a 1,500 psi helm and keyed bullhorns on the cylinder for maximum durability and minimal lost motion.Whether a bass boat, flats boat or tournament-style offshore fishing boat, the SilverSteer™ will deliver smooth, responsive, and precise steering.Adjustable boss style fittings allow precise hose routing without the risk of breaking the fittings by over-tightening or leaking fittings from loosening during installation, a common problem on competing cylinders.UC130-SVS-1 Cylinder is ideal for applications with limited space or potential pinch-points between the cylinder and transom (i.e., when tilting the motor all the way up or motors mounted on a jack plate).  The end-mounted fittings keep the hydraulic hoses free and clear.SilverSteer™ Package Kit Contains:UC130-SVS-1 Cylinder (fittings face out from the ends of the cylinder) Quick Guide (pdf)Brochure (pdf)

Read more less

TM87 19' Rack & Pinion Steering CableFeatures: High-Efficiency Rack & Pinion Steering Cable Compatible with SSC134, SSC135, and SSCX154 competing cables and SH91610p helms Performance Components: All stainless steel cable output ends Made of corrosion-resistant materials 3.7" cable stroke 3.3 turns lock-to-lock 7.9" cable bend radius TM87 Steering Cables are not to be used on boats equipped with engines that exceed the maximum horsepower rating of the boat. Optional Steering Wheel. Exceeds ISO 8848 safety standards. Exceeds ABYC P17 safety standards. Universal replacement steering cable for standard and non-feedback Rack & Pinion Steering Systems. Fast, simple, easy cable installation: Universal replacement for standard, ZTF, and no feedback rotary helms

Read more less

TM87 20' Rack & Pinion Steering CableFeatures: High-Efficiency Rack & Pinion Steering Cable Compatible with SSC134, SSC135, and SSCX154 competing cables and SH91610p helms Performance Components: All stainless steel cable output ends Made of corrosion-resistant materials 3.7" cable stroke 3.3 turns lock-to-lock 7.9" cable bend radius TM87 Steering Cables are not to be used on boats equipped with engines that exceed the maximum horsepower rating of the boat. Optional Steering Wheel. Exceeds ISO 8848 safety standards. Exceeds ABYC P17 safety standards. Universal replacement steering cable for standard and non-feedback Rack & Pinion Steering Systems. Fast, simple, easy cable installation: Universal replacement for standard, ZTF, and no feedback rotary helms

Read more less

TM87 11' Rack & Pinion Steering CableFeatures: High-Efficiency Rack & Pinion Steering Cable Compatible with SSC134, SSC135, and SSCX154 competing cables and SH91610p helms Performance Components: All stainless steel cable output ends Made of corrosion-resistant materials 3.7" cable stroke 3.3 turns lock-to-lock 7.9" cable bend radius TM87 Steering Cables are not to be used on boats equipped with engines that exceed the maximum horsepower rating of the boat. Optional Steering Wheel. Exceeds ISO 8848 safety standards. Exceeds ABYC P17 safety standards. Universal replacement steering cable for standard and non-feedback Rack & Pinion Steering Systems. Fast, simple, easy cable installation: Universal replacement for standard, ZTF, and no feedback rotary helms

Read more less

ATLAS FingerFlex Blinker Trim Control for Hydraulic Helms - Dual Control SwitchUPDATED DESIGN: FingerFlex "Blinker Style" Steering Wheel Trim SwitchT-H Marine offers the answer to convenient trim control for hydraulic helms - FingerFlex. Simple and easy to install, this unit can be added to any boat with only a moderate amount of difficulty.FingerFlex incorporates "Positive Clicking" technology that provides a positive touch and feel so, unlike similar systems, you know when your trim is operating and that's important when you really need it!FingerFlex can be installed on the right or left side of the bezel or both for dual controls. It can also be used to control hydraulic jack plates in addition to tilt and trim systems. Versions are also available to fit most mechanical steering systems.Features: The Ultimate in Trim Control for Hydraulic Helms Positive clicking technology for positive touch Operates engine trim and/or jack plates Fits hydraulic, cable, and tilt steering Easy installation Specifications: "Blinker" style switches allow quick and easy trim control Available in single or dual configurations

Read more less

TM87 13' Rack & Pinion Steering CableFeatures: High-Efficiency Rack & Pinion Steering Cable Compatible with SSC134, SSC135, and SSCX154 competing cables and SH91610p helms Performance Components: All stainless steel cable output ends Made of corrosion-resistant materials 3.7" cable stroke 3.3 turns lock-to-lock 7.9" cable bend radius TM87 Steering Cables are not to be used on boats equipped with engines that exceed the maximum horsepower rating of the boat. Optional Steering Wheel. Exceeds ISO 8848 safety standards. Exceeds ABYC P17 safety standards. Universal replacement steering cable for standard and non-feedback Rack & Pinion Steering Systems. Fast, simple, easy cable installation: Universal replacement for standard, ZTF, and no feedback rotary helms

Read more less

TM87 12' Rack & Pinion Steering CableFeatures: High-Efficiency Rack & Pinion Steering Cable Compatible with SSC134, SSC135, and SSCX154 competing cables and SH91610p helms Performance Components: All stainless steel cable output ends Made of corrosion-resistant materials 3.7" cable stroke 3.3 turns lock-to-lock 7.9" cable bend radius TM87 Steering Cables are not to be used on boats equipped with engines that exceed the maximum horsepower rating of the boat. Optional Steering Wheel. Exceeds ISO 8848 safety standards. Exceeds ABYC P17 safety standards. Universal replacement steering cable for standard and non-feedback Rack & Pinion Steering Systems. Fast, simple, easy cable installation: Universal replacement for standard, ZTF, and no feedback rotary helms

Read more less

TM87 15' Rack & Pinion Steering CableFeatures: High-Efficiency Rack & Pinion Steering Cable Compatible with SSC134, SSC135, and SSCX154 competing cables and SH91610p helms Performance Components: All stainless steel cable output ends Made of corrosion-resistant materials 3.7" cable stroke 3.3 turns lock-to-lock 7.9" cable bend radius TM87 Steering Cables are not to be used on boats equipped with engines that exceed the maximum horsepower rating of the boat. Optional Steering Wheel. Exceeds ISO 8848 safety standards. Exceeds ABYC P17 safety standards. Universal replacement steering cable for standard and non-feedback Rack & Pinion Steering Systems. Fast, simple, easy cable installation: Universal replacement for standard, ZTF, and no feedback rotary helms

Read more less

TM87 22' Rack & Pinion Steering CableFeatures: High-Efficiency Rack & Pinion Steering Cable Compatible with SSC134, SSC135, and SSCX154 competing cables and SH91610p helms Performance Components: All stainless steel cable output ends Made of corrosion-resistant materials 3.7" cable stroke 3.3 turns lock-to-lock 7.9" cable bend radius TM87 Steering Cables are not to be used on boats equipped with engines that exceed the maximum horsepower rating of the boat. Optional Steering Wheel. Exceeds ISO 8848 safety standards. Exceeds ABYC P17 safety standards. Universal replacement steering cable for standard and non-feedback Rack & Pinion Steering Systems. Fast, simple, easy cable installation: Universal replacement for standard, ZTF, and no feedback rotary helms

Read more less

TM87 14' Rack & Pinion Steering CableFeatures: High-Efficiency Rack & Pinion Steering Cable Compatible with SSC134, SSC135, and SSCX154 competing cables and SH91610p helms Performance Components: All stainless steel cable output ends Made of corrosion-resistant materials 3.7" cable stroke 3.3 turns lock-to-lock 7.9" cable bend radius TM87 Steering Cables are not to be used on boats equipped with engines that exceed the maximum horsepower rating of the boat. Optional Steering Wheel. Exceeds ISO 8848 safety standards. Exceeds ABYC P17 safety standards. Universal replacement steering cable for standard and non-feedback Rack & Pinion Steering Systems. Fast, simple, easy cable installation: Universal replacement for standard, ZTF, and no feedback rotary helms

Read more less

TM87 18' Rack & Pinion Steering CableFeatures: High-Efficiency Rack & Pinion Steering Cable Compatible with SSC134, SSC135, and SSCX154 competing cables and SH91610p helms Performance Components: All stainless steel cable output ends Made of corrosion-resistant materials 3.7" cable stroke 3.3 turns lock-to-lock 7.9" cable bend radius TM87 Steering Cables are not to be used on boats equipped with engines that exceed the maximum horsepower rating of the boat. Optional Steering Wheel. Exceeds ISO 8848 safety standards. Exceeds ABYC P17 safety standards. Universal replacement steering cable for standard and non-feedback Rack & Pinion Steering Systems. Fast, simple, easy cable installation: Universal replacement for standard, ZTF, and no feedback rotary helms

Read more less

TM87 21' Rack & Pinion Steering CableFeatures: High-Efficiency Rack & Pinion Steering Cable Compatible with SSC134, SSC135, and SSCX154 competing cables and SH91610p helms Performance Components: All stainless steel cable output ends Made of corrosion-resistant materials 3.7" cable stroke 3.3 turns lock-to-lock 7.9" cable bend radius TM87 Steering Cables are not to be used on boats equipped with engines that exceed the maximum horsepower rating of the boat. Optional Steering Wheel. Exceeds ISO 8848 safety standards. Exceeds ABYC P17 safety standards. Universal replacement steering cable for standard and non-feedback Rack & Pinion Steering Systems. Fast, simple, easy cable installation: Universal replacement for standard, ZTF, and no feedback rotary helms

Read more less

LTB1 Liquid Tie BarLiquid Tie Bar specifically for Up Series by Uflex.

Read more less

UC128-SVS Mounting HardwareMounting hardware for UC128-SVS Cylinder

Read more less

MasterDrive Single Station Retrofit Kit MD40-FM Includes Helm, Interface, MasterDrive, Power UnitFeatures: Eliminates torque at the steering wheel Three different selectable levels of power give the boater the desired feeling on the wheel (PATENTED) Automatically reverts to manual mode in case of power loss High efficiency, low AMP draw The system is always running permits immediate control in any sea conditions Equipped with a safety switch ON/OFF (SMART BUTTON) Can be used on dual-station installations Suitable for use with an autopilot Low noise Voltage: 12VDC CE marked in conformity with ABYC P21, ISO 10592 safety standards Ignition protected (SAE J-1171 and UNI EN 28846) What's In The Box? System Components 1 single packaged KIT MD40FM Dual Cylinder containing: 1 UH40-F Front Mount Master Helm 1 UPMD Power Unit, 15’ (4,5 m) wiring harness included 1 UCMD User Interface This is a standard Inboard kit that does not include Cylinders, Hose Kits, or Steering wheels. Please indicate what Cylinder model is needed. You will also need to order Hose Kits (Not Included) and a Steering Wheel if required. Optional Second Station Kit Not included with the above-listed MD Kit: 1 KIT MD2: for dual station Flexible hydraulic hoses 1 Tilt mechanism X66-40613 M suitable for Tilt Mount Helm. Tilt range of 48° and five locking positions. 1 Dual cylinder application Tie Bar: See Selection (Outboard Application Only) 1 Steering Wheel: See Selection 1 Instruction manual Note: The MasterDrive™ helms (both the UH Master and the UHD slave for a dual station), the UPMD Power Unit and the UCMD User Interface are the same products shown on the outboard MasterDrive™ system.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

Hydraulic Hose Kit 3' - PairTwo high-pressure flexible hoses, with pre-crimped fittings and bend restrictors on both ends.Specifications: Length: 3 ft. Fittings: ORFS *Not recommended for use with SilverSteer™ Series cylinders.

Read more less

Masterdrive™ Steering System for 1 Engine - 1 Cylinder UC128-SVS 2 Cylinder Tilt HelmKit Includes: UH32-T-X88: MasterDrive 32cc tilt mount helm with tilt mechanism for power steering UCMD: MasterDrive user interface UPMD: MasterDrive power unit, UNIT 12V DC UC128-SVS/2: UC128 SilverSteer cylinder ver 2 OIL 15: 2 quarts of OIL 15 This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

Masterdrive™ Steering System for 1 Engine - 1 Cylinder UC128-SVS 2 CylinderKit Includes: UH32-F: MasterDrive 32cc front mount helm UCMD: MasterDrive user interface UPMD: MasterDrive power unit 12V DC UC128-SVS/2: UC128 SilverSteer cylinder ver 2 OIL 15: 2 quarts of OIL 15 This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

MD32-1F Steering SystemThe Uflex Front Mount Helm Single Cylinder Outboard MasterDrive™ Steering System eliminates torque at the steering wheel. Three different selectable power levels give the boater the desired feeling on the wheel. Automatically reverts to manual mode in case of power loss. The system always running permits immediate access to control in any sea conditions.Features: Equipped with safety switch ON/OFF, smart button It can be used on dual-station installations High efficiency Low AMP draw Suitable for use with autopilot Low noise Voltage: 12VDC  CE marked in conformity with ABYC P21, ISO 10592 safety standards  Ignition protected (SAE J-1171 and UNI EN 28846) This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

UC168-1 Hydraulic Steering CylinderInboard boat hydraulic steering cylinder. Balanced cylinder, an equal number of turns lock-to-lock.

Read more less

GoTech™ 1.0 Universal Front Mount Outboard Hydraulic Steering SystemFor outboard single engine up to 115hp.Kit Contains: UP18 - Intermediate helm pump UC81-OBF - Front mount outboard cylinder OL 150 - Hydraulic oil - 2 litres KIT OB-GT-60 - Hose kit dia, 1/4" 6M(19.7") length Brochure (pdf)

Read more less

M90 Mach Rotary Steering Cable - 18'The M90 Mach 18' Rotary Blue Case Steering Cable. Specifications: Cable Length (Feet): 18' Box Dimensions: 3"H x 18"W x 28"L WT: 8.5 lbs UPC: 702755044116

Read more less

M90 Mach Rotary Steering Cable - 11'The M90 Mach 11' Rotary Blue Case Steering Cable. Specifications: Cable Length (Feet): 11' Box Dimensions: 3"H x 18"W x 27"L WT: 6.4 lbs UPC: 702755044048

Read more less

SilverSteer™ 2.0 High-Performance Front Mount Outboard Hydraulic Steering System - 1500PSI FM V2Specifically designed for high performance and high torque applications, the SilverSteer features a 1,500 psi helm and keyed bullhorns on the cylinder for maximum durability and minimal lost motion.Whether a bass boat, flat boat or tournament style offshore fishing boat, the SilverSteer™ will deliver smooth, responsive and precise steering.Adjustable boss style fittings allow precise hose routing without the risk of breaking the fittings by overtightening or leaking fittings from loosening during installation, a common problem on competing cylinders.Features: Horsepower: Single engine, 350hp, dual engine, 600hp Helm: 7.3 cu in/120cc Hose: 1,500psi Turns Lock-to-Lock: 4.3 Included Equipment: UP25 F-SVS front mount helm pump, UC128/2-SVS front mount outboard cylinder, hydraulic oil (two qts.), Hose kits sold separately Steering Wheel: Sold separately Steering Wheel Shaft: 3/4" tapered Warranty: Two years Quick Guide (pdf)Brochure (pdf)

Read more less

Kit OB - Hose Kit for Single Station InstallationConsists of a pair of high pressure hoses supplied with preassembled fittings on both ends.Length: 28 FeetFittings: ORFS Specifications: Cable Length (Feet): 28' Box Dimensions: 4"H x 14"W x 14"L WT: 4.3 lbs UPC: 702755015987

Read more less

ROTECH™ STEERING SYSTEMROTECH - X13T71FC - helm X34 - 90° bezel M66 - 13' steering cable UFLEX ROTARY STEERING SYSTEMS PACKAGED IN A BOX: A convenient kit form, especially suitable as replacement steering, that includes helm, bezel and cable.FEATURES AND TECHNICAL SPECIFICATIONS: Fast connect, simple installation All stainless steel cable output ends Corrosion resistant materials Particulary suitable where clearance is limited Standard 3/4" tapered shaft Lock-to-lock steering wheel turns: approx. 3,8 Stroke: 9" (228 mm) Maximum allowable steering wheel diameter: 16" (406 mm) Minimum steering cable bend radius: 7.9" (200 mm) Minimal feedback Compact for mounting T71FC steering system is not to be used on boats quipped with engines that exceed the maximum horsepower rating of the boat For boats faster than 50 mph the twin cable steering system T72FC is recommended Exceeds EN 28848 safety standards Exceeds ABYC P17 safety standards **The wheel is not included Specifications: Cable Length (Feet): 13' Box Dimensions: 2"H x 5"W x 5"L WT: 28.15 lbs UPC: 702755019558

Read more less

M66 Fast Connect Rotary Steering CableSteering Helm: Ultraflex T71FC T72FC - T73NR FC T81FC - T82FC T83NR FC Teleflex Safe TQC/NFB Morse D290Ultraflex year 2001 and prior: T71 - T72 - T73NR T74NR - T81 - T82 T83NR - T84NR Length: 13 Feet Specifications: Cable Length (Feet): 13' Box Dimensions: 3"H x 18"W x 23"L WT: 7.05 lbs UPC: 702755017110

Read more less

SilverSteer UC128TS High Performance Cylinder V3 - Angled Offset Link ArmSpecially designed for high-performance, high-torque applications, the SilverSteer™ UC128TS cylinder is recommended for bass boats, flats boats, and tournament fishing boats. Compatible with competing helms, hoses, and oil, the UC128TS is built to last with a heavy-duty stainless steel cylinder rod, seals, and link assemblies. Simple to install and fits almost every 2- and 4-stroke outboard engine on the market.Features:Type 3 angled offset link armPlease note that UC128TS-SVS is a direct replacement for UC128-SVS. UC128TS-SVS has the same cylinder, but it's easier to service.

Read more less

SilverSteer UC128 High Performance Cylinder V1 - Straight Link ArmSpecially designed for high-performance, high-torque applications, the SilverSteer™ UC128TS cylinder is recommended for bass boats, flats boats, and tournament fishing boats. Compatible with competing helms, hoses, and oil, the UC128TS is built to last with a heavy-duty stainless steel cylinder rod, seals, and link assemblies. Simple to install and fits almost every 2- and 4-stroke outboard engine on the market.Features:Type 1 straight link armPlease note that P/N: UC128TS-SVS 1 is a direct replacement of P/N: UC128-SVS 1. P/N: UC128TS-SVS 1 has the same cylinder, but it's easier to service.

Read more less

Wireless Remote For adding a second pendant, or to replace original Can be paired in field with existing receiver Includes 2x AA Batteries Specifications: Type: Parts Box Dimensions: 2"H x 6"W x 7"L WT: 0.6 lbs UPC: 628309263348 Brochure (pdf)

Read more less

M90 Mach Rotary Steering Cable - 15'The M90 Mach 15' Rotary Blue Case Steering Cable. Specifications: Cable Length (Feet): 15' Box Dimensions: 3"H x 18"W x 27"L WT: 7.7 lbs UPC: 702755044086

Read more less

ROTECH™ STEERING SYSTEMROTECH - X20T71FC - helm X34 - 90° bezel M66 - 20' steering cable UFLEX ROTARY STEERING SYSTEMS PACKAGED IN A BOX: A convenient kit form, especially suitable as replacement steering, that includes helm, bezel and cable.FEATURES AND TECHNICAL SPECIFICATIONS: Fast connect, simple installation All stainless steel cable output ends Corrosion resistant materials Particulary suitable where clearance is limited Standard 3/4" tapered shaft Lock-to-lock steering wheel turns: approx. 3,8 Stroke: 9" (228 mm) Maximum allowable steering wheel diameter: 16" (406 mm) Minimum steering cable bend radius: 7.9" (200 mm) Minimal feedback Compact for mounting T71FC steering system is not to be used on boats quipped with engines that exceed the maximum horsepower rating of the boat For boats faster than 50 mph the twin cable steering system T72FC is recommended Exceeds EN 28848 safety standards Exceeds ABYC P17 safety standards **The wheel is not included Specifications: Cable Length (Feet): 20' Box Dimensions: 2"H x 5"W x 5"L WT: 32.4 lbs UPC: 702755019978

Read more less

NaviTech™ Power Steer AssemblyNow you can get the same technology used to drive the most powerful and best handling cars for your boat. Taking the latest technology from the automotive industry, Ultraflex has combined Electronic Power Steering (EPS) used in the most popular cars in the world with the latest mechanical steering helms and Mach 90 high efficiency steering cable to deliver unprecedented performance. Perfectly silent, the system draws minimal power and furtheremore is very easy to install. The NaviTechTM also has Integrated System Monitoring (ISM) which detects certain operating conditions including the number of cycles and notifies the end user with a vibration signal in the steering wheel if the cable needs to be changed. Never before has a steering system monitored it’s own operating conditions and given the driver diagnostic feedback. For specific applications Ultraflex can use programmable software to dial in the hand wheel effort and steering output to meet specific performance objectives of boat builders.A Complete Steering System Consists of: Power assisted steering helm:  T91NAV - 43207S - single cable steering helm Tilt mechanism: X66 - 40613M - Tilt mechanism for NaviTechTM tilt mount helms. Tilt range of 48° and five locking positions Steering cable: M90 Nav (patented)  ATTENTION: M90 Nav steering cable is suitable for use also with T71FC, T72FC, T73NRFC, T81FC, T82FC, T83NRFC, T91, T93ZT, T101, T103ZT. Ultraflex steering helms. M66 will not fit the following Uflex helms: T91, T93ZT, T101, T103ZT. Optional steering wheel  Features and Technical Specifications: Automotive steering effort and response 100% Balanced steering - Port to Starboard / Starboard to Port Silent Operation Monitoring software with integrated cycle counter, for a correct cable replacement.  By haptic feedback on the wheel, the system is able to signal anomalies, such as:  Excessive cable load  Stuck cable alarm Field tested for over 3 years 16 Nm of assist torque capability Able to tune on center and end of travel torque effort Consistent steering assist through all vessel speed ranges Applied in leading automotive application since 2011. Nowadays automotive production is over 1 million units per year 10 - 15 VDC 8 - 15 A nominal current during steering maneuvers Supplied with 10 ft electrical harness. It needs a 40 A fuse (to be ordered separately). Validation for Marine application is per CE, ABYC P17, P27, and ISO 25197 NMMA Type Acceptance Completed Limit of Applications: Outboard engines: Up to 150 hp, maximum 50 mph, no jackplates

Read more less

XPS Hydraulic Fluid - 1 QuartSpecially formulated fully synthetic power steering fluid for the Panther XPS System.Specifications: Size: 1 quartThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

Yamaha 150-200 Zero Torque Feedback TillerThe four stroke outboard engines are generating high torque loads which can make tiller steered boats difficult to steer. The Uflex® ZTF Tiller systems eliminate propeller torque at the tiller handle when the driver is not actively changing direction.Using a hydraulic valve, the propeller torque is locked from reaching the tiller handle unless the driver pushes or pulls on the end of the handle, at which point the valve opens and allows for active steering movements. Now you can drive your tiller steered boat in comfort, saving your energy for reeling in fish rather than effort to just get to your favorite fishing spot.

Read more less

PROTECH 1.1 Front Mount OB Hydraulic System - Includes UP28 FM Helm, Oil & UC128-TS/1 Cylinder - No HosesDurability and performance define the Protech front mount outboard steering package. From the stainless steel helm shaft, heavy duty shaft seals, carbon steel piston and 304 electropolished and passivated stainless link assemblies, the Protech is built for maximum longevity and peak performance. Adjustable boss style fittings allow precise hose routing without the risk of breaking the fittings by overtightening or leaking fittings from loosening during installation, a common problem on competing cylinders. Kit Contains: UP28FM - Front mount helm pump UC128-TS/1 Cylinder OIL 15 - Hydraulic oil - 2 quarts Hoses & Wheel Not Included Brochure (pdf)

Read more less

Masterdrive™ 32CC Front Mount HelmFeatures: Available in two different displacement sizes: 32 cc (1.95 cu.in) and 40 cc (2.44 cu.in) Front Mount and Tilt Mount versions The dual station installation version is also available (please refer to the MD2 Kit) Built-in relief valve 3/4” tapered shaft Corrosion-resistant painted body Waterproof Tilt Mount version is suitable for use with X66-40613 M tilt mechanism Specifications: Mounting: Front Mount Application: Single Cylinder Number of Stations: 1 Maximum Wheel Diameter: 406 mm - 16" Displacement/Revolution: 32cc - 1.95 cu. in. This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

UC128TS / UC128-SVS Tiller Bolt KitTiller Bolt Kit for UC128TS / UC128-SVS Cylinder

Read more less

SVS HP Hose Kit - 12'Two high-pressure Kevlar stranded flexible hoses with pre-crimped fittings and bend restrictors on both ends. Recommended for use with all Ultraflex SilverSteer™ and MasterDrive™ helms with 1500 psi relief valves.

Read more less

Kit OB - Hose Kit for Single Station InstallationConsists of a pair of high pressure hoses supplied with preassembled fittings on both ends.Length: 18 FeetFittings: ORFS Specifications: Cable Length (Feet): 18' Box Dimensions: 4"H x 14"W x 14"L WT: 3.4 lbs UPC: 702755015932

Read more less

ROTECH™ STEERING SYSTEMROTECH - X15T71FC - helm X34 - 90° bezel M66 - 15' steering cable UFLEX ROTARY STEERING SYSTEMS PACKAGED IN A BOX: A convenient kit form, especially suitable as replacement steering, that includes helm, bezel and cable.FEATURES AND TECHNICAL SPECIFICATIONS: Fast connect, simple installation All stainless steel cable output ends Corrosion resistant materials Particulary suitable where clearance is limited Standard 3/4" tapered shaft Lock-to-lock steering wheel turns: approx. 3,8 Stroke: 9" (228 mm) Maximum allowable steering wheel diameter: 16" (406 mm) Minimum steering cable bend radius: 7.9" (200 mm) Minimal feedback Compact for mounting T71FC steering system is not to be used on boats quipped with engines that exceed the maximum horsepower rating of the boat For boats faster than 50 mph the twin cable steering system T72FC is recommended Exceeds EN 28848 safety standards Exceeds ABYC P17 safety standards **The wheel is not included Specifications: Cable Length (Feet): 15' Box Dimensions: 2"H x 5"W x 5"L WT: 29.9 lbs UPC: 702755019671

Read more less