Mold & Mildew Stain Remover - 16ozSay goodbye to stubborn mold and mildew stains with Xanigo Marine’s Mold & Mildew Stain Remover! This powerful formula is easy to use and is the perfect solution for removing mold and mildew stains from boat tops, vinyl cushions, chairs, canopies, and more. Its versatile formula can also be used on rubber fenders, fiberglass, caulk, tile, grout, shower stalls, sinks, counters, and other surfaces that may be prone to mold and mildew.Simply spray the product onto a cool substrate, let it soak for a few minutes, and watch the mold and mildew disappear. To ensure the best results, avoid using it in direct sunlight.After removing it, make sure to PREVENT the mold from coming back with Xanigo Marine’s Mold & Mildew Preventer.Specifications:Bottle Size: 16 ouncesSTEP 1: Remove Mold & Mildew with Xanigo Marine's Mold & Mildew Stain RemoverXanigo Marin’s Mold & Mildew Stain Remover is a very effective way to remove mold and mildew. Being a harsh chemical, it should only be used once to remove the mold, and then the preventer should be applied to prevent the mold from coming back. Liberally apply the Mold & Mildew Stain Remover to the seats. Let it sit for 60-90 seconds but do not let it dry. An additional solution may need to be applied— keep it wet. Agitate in a circular motion with a brush to remove the mold from the pores. Rinse thoroughly with clean water.STEP 2: Neutralize the RemoverAfter rinsing the remover off with fresh water, it's important to make sure any leftover remover is neutralized so it doesn't dry out vinyl or impact stitching. Spray the Waterless Wash onto the seats and wipe it in with a microfiber cloth to neutralize the chemicals in the remover.STEP 3: Prevent Mold & Mildew with Xanigo Marine's Mold & Mildew PreventerWith just one application, a boat will be protected against mold and mildew for up to 90 days. The preventer creates a covalent bond with the surface on which it is applied. Users can apply this to almost any marine surface, including vinyl seats, life jackets, canvas, ropes, compartments, live wells, bilges, patio furniture, and other areas of high moisture.Spray the Mold & Mildew Preventer onto a clean, dry surface and spread it evenly with a microfiber cloth. Remember to spread, not wipe off.STEP 4: Maintain Seats with Xanigo Marine's Waterless WashKeep the boat clean between mold prevention applications without the use of harsh chemicals or wasting water. Spray the Waterless Wash onto the seats, let it sit for 15-20 seconds, and wipe it off with a microfiber cloth. Remove sunscreen (a major food source for mold) and leave a refreshing smell without impacting the protective layer created by the mold & mildew preventer.Also, a great way to shine up a gel coat quickly! Specifications: Type: Mildew & Moisture Box Dimensions: 3"H x 3"W x 8"L WT: 1.2 lbs UPC: 860007772771 Quick Guide (pdf)

Read more less

Quick Dry Water Blade - 18"Swobbit award winning water blades are made of high quality, medical grade silicone.  Perfect for a drying all types of surface types and surface sizes. No need for messy towels or chamois. Whether marine, auto, RV or aviation, Swobbit water blades make protecting your investment, a simple one. Features: T-Bar edge whisks away water in one pass Dries virtually any surface in 1/3 the time of messy towels, chamois or squeegees  15 times less friction than towels Safe for all finishes including paint, fiberglass, windows and enclosures Can be used with the Quick Dry Uni-Snap adapter (SW21215) to dry hard to reach areas *Sold as an Individual  Specifications: Type: Tools & Accessories Box Dimensions: 2"H x 3"W x 18"L WT: 0.6 lbs UPC: 633590213149 Brochure (pdf)

Read more less

Quick Dry AdapterPremium cleaning adapters and accessories offer you flexibility and ease with your maintenance.  Whether boats, auto, RV or aviation, our cleaning adapters and accessories make protecting your investment, a simple one.Designed and constructed with quality in mind, we’re bringing innovative ideas and products to the market. Features: Allows you to use the 14" or 18" water blade  Works with the Perfect Pole telescoping handle Dry hard to reach areas like decks, hardtops, roofs, hull sides and more, quickly and easily  Adapter is adjustable to 180 degrees. *Sold as an Individual Specifications: Type: Tools & Accessories Box Dimensions: 2"H x 3"W x 9"L WT: 0.3 lbs UPC: 633590212159 Brochure (pdf)

Read more less

Waterless Wash & Fabric Refresher - 1qtThe Xanigo Marine Waterless Wash is the perfect way to keep the boat clean between Xanigo Marine Mold & Mildew Preventer applications without the use of harsh chemicals or wasting water. No hose or running water is needed!Protect investments by protecting against mold and mildew on seats, life jackets, vinyl, canvas, ropes, carpets, and other areas with high moisture.Specifications:Bottle Size: 1 quartThe Complete Process to Treat and Prevent Mold & Mildew on Vinyl Boat SeatsSTEP 1: Remove Mold & Mildew with Xanigo Marine's Mold & Mildew Stain RemoverXanigo Marin’s Mold & Mildew Stain Remover is a very effective way to remove mold and mildew. Being a harsh chemical, it should only be used once to remove the mold, and then the preventer should be applied to prevent the mold from coming back. Liberally apply the Mold & Mildew Stain Remover to the seats. Let it sit for 60-90 seconds but do not let it dry. An additional solution may need to be applied— keep it wet. Agitate in a circular motion with a brush to remove the mold from the pores. Rinse thoroughly with clean water.STEP 2: Neutralize the RemoverAfter rinsing the remover off with fresh water, it's important to make sure any leftover remover is neutralized so it doesn't dry out vinyl or impact stitching. Spray the Waterless Wash onto the seats and wipe it in with a microfiber cloth to neutralize the chemicals in the remover.STEP 3: Prevent Mold & Mildew with Xanigo Marine's Mold & Mildew PreventerWith just one application, a boat will be protected against mold and mildew for up to 90 days. The preventer creates a covalent bond with the surface on which it is applied. Users can apply this to almost any marine surface, including vinyl seats, life jackets, canvas, ropes, compartments, live wells, bilges, patio furniture, and other areas of high moisture.Spray the Mold & Mildew Preventer onto a clean, dry surface and spread it evenly with a microfiber cloth. Remember to spread, not wipe off.STEP 4: Maintain Seats with Xanigo Marine's Waterless WashKeep the boat clean between mold prevention applications without the use of harsh chemicals or wasting water. Spray the Waterless Wash onto the seats, let it sit for 15-20 seconds, and wipe it off with a microfiber cloth. Remove sunscreen (a major food source for mold) and leave a refreshing smell without impacting the protective layer created by the mold & mildew preventer.Also, a great way to shine up a gel coat quickly! Specifications: Type: Washes Box Dimensions: 3"H x 3"W x 10"L WT: 2.3 lbs UPC: 860007772740 Quick Guide (pdf)Brochure (pdf)

Read more less

Weedless Wedge™ 2 Props (MKP-32) Minn Kota®s exclusive prop is the only of its kind that is 100 percent weedless. Unique design features swept-back and flared blades to "wedge" weeds away while conserving battery power. Moves through heavy vegetation, even at slow speeds. Motor Diameter:   3 - 5 / 8"Prop Nut Kit:        "A" Compatible with Motor Models With Serial Number Prefix "WW"55AT, 55AT/H, 70AT, TERROVA 55, TERROVA 55/US2, TERROVA 55/AP, TERROVA 55/AP/US2, MAX 55/SC, MAX 55, MAX 55/SC/H, MAX 70, MAX 70/H/3X,MAX 70/SC, MAX 70/SC/H, MAX 70/US, MAX 55T, MAX 70T, 50PD v2, 55PD v2, 55PD V2/US2, 55PD V2/AP, 55PD V2/AP/US2, 65PD V2, 70PD V2, 70PD V2/AP ,70PD V2/AP/US2, 54PD V2 pontoon, 68PD V2 pontoon, 55HC pontoon, 70HC pontoon, 50PD, 55PD/AP, 55PD/AP/US, 55PD/US, 65PD, 70PD, 70PD/AP, 70PD/US, 70PD/AP/US, VECTOR 46, VECTOR 55, VECTOR 55/3X, VECTOR 70, VECTOR 70/3X, EDGE 45, EDGE 55, EDGE 55/H, EDGE 70, ENDURA 46, ENDURA 50, ENDURA 55, ENDURA PRO 46, ENDURA PRO 55, CAMO 55XL, RT 55/ST/CP , RT 55/ST/CP/AP, RT 55/SP/CP, RT 55/SP/CP/AP, RT 70/SP/CP, RT 70/SP/CP/AP, RT 55/SM /L&D, RT 55/SM/L&D/SC, RT 55/SM/L&D/3X, RT 55/SM/BG/3X, RT 70/SM/L&D/SC , RT 55/SE/L&D, RT 70/SE/L&D, RT 55/B/H, RT55/B/SC/L&D, RT55/B/L&D/3X, RT55/B/3X, RT65/B/SC, RT65/B/SC/L&D/3X, RT 70/B/H, RT 70/SC, RT50/S, RT55/S, MK55EM, RT 55EM, TRAXXIS 70, TRAXXIS 55, TRAXXIS 55/SCWARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Brochure (pdf)

Read more less

Perfect Pole - 3' to 6' ExtensionThe strongest, easiest-to-use cleaning extension poles on the market today.Patented Insta-just internal tracking system, with the exclusive Uni-Snap quick release mechanism, makes extending and collapsing the Perfect Pole quick and fool proof, eliminating frustrating alignment problems.  The button will pop up in the next hole, every time.  Changing accessories is a snap!SW45650 Our most popular telescoping handle. Ideal for RV's and boats of all sizes.Features: Telescopes from 3' to 6'  No-look tracking system for foolproof adjustments   Teardop design makes Perfect Pole up to 67% stronger than other telescoping handles Comfortable hand grip  Designed to work with Swobbit System Uni-Snap quick release accessories *Sold as an Individual Specifications: Type: Tools & Accessories Box Dimensions: 1"H x 1"W x 41"L WT: 1.5 lbs UPC: 633590456508 Brochure (pdf)

Read more less

845 Insulator Wax - 16ozA user-friendlier version of the No. 476s paste, No. 845 stands as Collinite’s most legendary product to date. Famous for its versatility, durability, and DIY ease of use, Insulator wax is ideal for both small and large surface area jobs where lasting protection and timely job completion are desired, but hard buffing and frequent reapplication are not practical. Leaves behind carnauba shine and durable polymer coating that preserves the finish and shields against the elements: UV, rain, snow, salt, dust, dirt, grime, bugs, staining, and more. Features:  Average spread/coverage: 1,200-2,000 sq. ft. Provides high gloss shine 4-7 months of weather protection Applications: For hand & dual action buffers use The best results/spread comes from the dual action buffer Minimal buffing required, Collinite 845 Insulator Wax is Collinite’s most “machine friendly” automotive wax Many professional detailers are successfully using 845 Insulator Wax as a topper for ceramic coatings 845 will take on a thicker gel consistency in colder temperatures and a thinner liquid consistency in warmer temperatures. The different viscosities do not alter the performance. It can be used in either form 845 Insulator was can be layered after waiting 12 hours between each coat *Sold as a individual Specifications: Type: Waxes & Polishes Box Dimensions: 3"H x 3"W x 8"L WT: 0.95 lbs UPC: 638234008457

Read more less

Mold & Mildew Stain Remover - 32ozSay goodbye to stubborn mold and mildew stains with Xanigo Marine’s Mold & Mildew Stain Remover! This powerful formula is easy to use and is the perfect solution for removing mold and mildew stains from boat tops, vinyl cushions, chairs, canopies, and more. Its versatile formula can also be used on rubber fenders, fiberglass, caulk, tile, grout, shower stalls, sinks, counters, and other surfaces that may be prone to mold and mildew.Simply spray the product onto a cool substrate, let it soak for a few minutes, and watch the mold and mildew disappear. To ensure the best results, avoid using it in direct sunlight.After removing it, make sure to PREVENT the mold from coming back with Xanigo Marine’s Mold & Mildew Preventer.Specifications:Bottle Size: 32 ouncesSTEP 1: Remove Mold & Mildew with Xanigo Marine's Mold & Mildew Stain RemoverXanigo Marin’s Mold & Mildew Stain Remover is a very effective way to remove mold and mildew. Being a harsh chemical, it should only be used once to remove the mold, and then the preventer should be applied to prevent the mold from coming back. Liberally apply the Mold & Mildew Stain Remover to the seats. Let it sit for 60-90 seconds but do not let it dry. An additional solution may need to be applied— keep it wet. Agitate in a circular motion with a brush to remove the mold from the pores. Rinse thoroughly with clean water.STEP 2: Neutralize the RemoverAfter rinsing the remover off with fresh water, it's important to make sure any leftover remover is neutralized so it doesn't dry out vinyl or impact stitching. Spray the Waterless Wash onto the seats and wipe it in with a microfiber cloth to neutralize the chemicals in the remover.STEP 3: Prevent Mold & Mildew with Xanigo Marine's Mold & Mildew PreventerWith just one application, a boat will be protected against mold and mildew for up to 90 days. The preventer creates a covalent bond with the surface on which it is applied. Users can apply this to almost any marine surface, including vinyl seats, life jackets, canvas, ropes, compartments, live wells, bilges, patio furniture, and other areas of high moisture.Spray the Mold & Mildew Preventer onto a clean, dry surface and spread it evenly with a microfiber cloth. Remember to spread, not wipe off.STEP 4: Maintain Seats with Xanigo Marine's Waterless WashKeep the boat clean between mold prevention applications without the use of harsh chemicals or wasting water. Spray the Waterless Wash onto the seats, let it sit for 15-20 seconds, and wipe it off with a microfiber cloth. Remove sunscreen (a major food source for mold) and leave a refreshing smell without impacting the protective layer created by the mold & mildew preventer.Also, a great way to shine up a gel coat quickly! Specifications: Type: Mildew & Moisture Box Dimensions: 4"H x 4"W x 10"L WT: 2.5 lbs UPC: 860007772788 Quick Guide (pdf)

Read more less

Rocker Stopper Boat StabilizerRocker Stoppers help dampen the rocking motion of boats at anchor. Simply tie Rocker Stoppers approximately 44 cm (18″) apart, making a string of them, with a 5-10 pound weight attached at the bottom of the string. Hang one string off each side of the boat. Just four units per side are what it takes on most boats to 36′. Be sure you hang them where they will always be underwater. Many people use mushroom anchors with their Rocker Stoppers because this type of weight nests well inside the last Rocker Stopper in your string. Use 10 mm (3/8″) braided nylon or 3-stranded nylon line.Use without a weight (or with a reduced weight) for drift fishing. Rocker Stoppers will slow down drift substantially. They are also great to use at the end of a dock to stabilize the tip from rocking. Rocker Stoppers nest together and each one is 33 cm (14″) in diameter.It’s lightweight and molded of high impact, virtually indestructible styrene. Can be deployed or retrieved in seconds. Unaffected by saltwater and cannot affect the sides of your boat. Units are made to “nest” within each other, so storage is a breeze.A Number of Rocker Stopper Units Needed on Each Side of the Boat (Sail or Power): Up to 26 feet (0-8 m) – 3 27 to 36 feet (8-11 m) – 4 37 to 42 feet (11-13 m) – 5 43 to 50 feet (13-15 m) – 8 Quick Guide (pdf)

Read more less

Instant Brass & Copper Tarnish RemoverNatural Organic salts formula Instantly Removes heavy tarnish without rubbing. Safer than traditional acid-based cleaners. Just spray & rinse. Use Indoors or Out.Instantly removes:Heavy tarnish, Rust & corrosion, Calcium deposits & stains, Heavy oxidation, Water spots & stainsSafe on:Glass, aluminum, painted surfaces, fiberglass, stucco, brick, porcelain, brass & copper. Works great on heavy tarnish, rust & corrosion, calcium deposits & stains, heavy oxidation, water spots & stains.Not for: Chrome or Patina finishes. WARNING: This product can expose you to chemicals including Methanol which is known to the State of California to cause reproductive harm, and 1, 4-Dioxane which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov. Specifications: Type: Metal Box Dimensions: 2"H x 4"W x 10"L WT: 1.2 lbs UPC: 065925018066

Read more less

12oz Aerosol Can - Non-Hazmat, Non-Flammable & Non-ToxicCorrosion Block is a clean fluid that actively protects metal using advanced polar bonding chemistry.  Synthetic additives in Corrosion Block completely penetrate corrosion cells…replacing the salt water which is then allowed to evaporate.  Corrosion Block’s hydrophobic film remains to further protect the metal acting like an “OFF SWITCH” for corrosion. Unlike waxy products Corrosion Block then leaves a clean clear moisture proof/hydrophobic film to prevent new corrosion formation. deeply penetrating into joints, connectors and around fasteners. Features: Formulated to KILL CORROSION ON CONTACT from completely submerged, to equipment affected by high moisture content in the air Corrosion Block is a clean fluid that actively protects metal and electronics using advanced polar bonding chemistry Synthetic additives in Corrosion Block completely penetrate corrosion cells...replacing the salt water which is allowed to evaporate A hydrophobic film remains to further protect the metal acting like an "OFF SWITCH" for corrosion Corrosion Block is safe; it is non-toxic and non-flammable, also the propellant used in our aerosol products is non-flammable Used worldwide to protect electrical and mechanical equipment in "Safety First" situations such  as Mining, Power Generating Stations, Fuel Depots, Gas and Petroleum refineries and more Protects: Switches Pressure Gauges Motor Operated Valves Terminal Strips Circuit Breakers Locks  Electronics Battery Terminals Running Lights Fuel Tanks Fuse Panels Connectors Alternator Leads Reefer Unit Wheels & Hubs Engines GPS Systems  Specifications: Type: Corrosion Protection Box Dimensions: 2"H x 2"W x 10"L WT: 0.95 lbs UPC: 770153200120

Read more less

Black Nylon Wire Tie MountThe AT-5 tie mount is designed to be set into wet resin during the hull lay up or bonded with our acrylic adhesives. It's designed for a #5 wire tie and has an average pull strength of 150 lbs. It's approved for submerged bilge applications. Stop putting plywood in your hull just to have a place to drive wire tie screws. Saves material and labor costs!

Read more less

FSR Fiberglass Stain Remover - 16ozFSR (Fiberglass Stain Remover) is a unique stain absorbing gel that is ideal for removing oil, rust, exhaust, waterline and transom stains. It can also be used anywhere else fiberglass stains may crop up-shower stalls, furniture, etc. Use for removing road soil from trailered boats and recreational vehicles. Its non-abrasive quality means that it's safe to use on white painted surfaces as well as on gel-coat. Just be sure to test a small area first to be sure FSR will not damage finish. Requires no sanding or compounding. Simply apply with a brush, sponge or cloth. Wait a few minutes and then wipe off or rinse. Specifications: Type: Fiberglass Box Dimensions: 4"H x 4"W x 4"L WT: 1.25 lbs UPC: 011698079001 Quick Guide (pdf)Owner's Manual (pdf)Brochure (pdf)

Read more less

FSR Big Job Fiberglass Stain Remover - 2-LiterFSR (Fiberglass Stain Remover) is a unique stain absorbing gel that is ideal for removing oil, rust, exhaust, waterline and transom stains. It can also be used anywhere else fiberglass stains may crop up-shower stalls, furniture, etc. Use for removing road soil from trailered boats and recreational vehicles. Its non-abrasive quality means that it's safe to use on white painted surfaces as well as on gel-coat. Just be sure to test a small area first to be sure FSR will not damage finish. Requires no sanding or compounding. Simply apply with a brush, sponge or cloth. Wait a few minutes and then wipe off or rinse.For really big clean-up jobs. 67.8 fl oz (2 liter) bottle. Specifications: Type: Fiberglass Box Dimensions: 3"H x 7"W x 10"L WT: 4.7 lbs UPC: 011698079209 Quick Guide (pdf)Owner's Manual (pdf)Brochure (pdf)

Read more less

MKA-50 Bow-Mount Stabilizer Kit for FortrexFeatures: Reduces motor bouncing when in stowed position Attaches to the left or right side of bowguard Pivots into vertical position and rests on the boat deck when motor is stowed Rotates in the horizontal position with bowguard when the motor is deployed Includes rubber bumper to protect deck finish Stainless steel hardware tested for saltwater use Fits any Fortrex or Riptide SF bow-mount trolling motor WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Sikaflex®-715 - White - 300ml CartridgeSemi self-leveling roof membrane sealer.Sikaflex®-715 is a one-component silane terminated polymer (STP) sealant that cures on exposure to atmospheric humidity.  Its unique flow characteristic is designed for roof sealing applications.  Sikaflex®-715 has very good adhesion and UV resistance making it suitable for open joints.  Features: Primerless adhesion to the difficult substrate Semi self-leveling for roof sealing Very good dispensing characteristics Isocyanate free Low VOC content Very good UV resistance Usage:Sikaflex®-715 is suitable for sealing a wide variety of RV roofing components including, EPDM; metals such as anodized and bare aluminum; phosphate, chromate, and zinc-plated steel; metal primers; 2-part coatings; ceramics and plastics. Seek manufacturer’s advice and perform tests on original substrates before using Sikaflex®-715 on materials prone to stress cracking. This product is suitable for experienced professional users only. Tests with actual substrates and conditions have to be performed to ensure adhesion and material compatibility.Surface Preparation:Surfaces must be clean, dry and free from grease, oil and dust. For repairs, removal of pre-exisiting products is crucial to avoid compatibility issues.  Surface treatment depends on the specific nature of the substrates and is crucial for a long lasting bond. Adhesion and compatibility have to be verified by tests on original substrates.Application:Sikaflex®-715 can be processed between 5 °C and 40 °C (41 °F and 104 °F) but, changes in reactivity and application properties have to be considered. The optimum temperature for substrate and process material is between 15 °C and 25 °C (59 °F and 77 °F). Sikaflex®-715 can be processed with manual, pneumatic, or electric-driven piston guns as well as pump equipment.Removal:Uncured Sikaflex®-715 may be removed from tools and equipment with Sika® Remover-208 or another suitable solvent. Once cured, the material can only be removed mechanically.  Hands and exposed skin have to be washed immediately using a suitable industrial hand cleaner and water. Do not use solvents on the skin.Overpainting:Sikaflex®-715 is not suitable for overpainting.Specifications: Chemical base: Silane Terminated Polymer Color (CQP001-1): White, black Cure mechanism: Moisture-curing Density (uncured): 1.52 kg/l (12.7 lb/gal) Non-sag properties: Semi self-leveling Application temperature: 5-40 °C (41-104 °F) Skin time (CQP019-1): 30 minutes A Shore A hardness (CQP023-1 / ISO 48-4): 10 Tensile strength (ASTM D412): 0.6 MPa (85 psi) Elongation at break (ASTM D412): 500% Service temperature (CQP513-1): -50-90 °C (-58-94 °F)

Read more less

World's Best Rope Handle Bucket - 5 Gallon - WhiteForget about rusty metal handles! An innovative rope handle design does not pierce the bucket cavity, which means no leaks or hardware failure. Because weight is distributed across the base of the rope, it won't tear the lip under heavy loads. The tough, heavily molded plastic is designed to last, making it the best bucket around!Makes for an Excellent: Boat bucket RV bucket Car wash bucket Storage bucket Trash bucket Fishing Bucket Specifications: Color: White  Size: 5-gallon bucket Dimensions (inch): 14.75" H x 12" W

Read more less

Sikaflex® 291 LOT Slow Cure Adhesive & Sealant 10.3oz(300ml) Cartridge - BlackSikaflex®-291 LOT is a 1-component, marine grade polyurethane elastomeric adhesive and sealant. It is a moisture cured, non-sag system designed with a long open time for jobs that require more time.Uses:General all-purpose, high strength marine sealant, which may be used for light duty bonding with long open time capability for humid climates or jobs requiring more time that remain permanently elastic.Characteristics & Advantages: Use above and below water line Resists salt water Paintable and sandable Excellent bond NSF approved for potable water USDA approved for incidental food contact WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Quick Guide (pdf)

Read more less

Aktivator-205 Clear 250ml BottleSika® Aktivator-205 is a solvent-based colorless clear adhesion promoter, which reacts with moisture and deposits active groups on the substrate. These groups act as a link between substrates and primers or sealants/adhesives. Sika® Aktivator-205 is designed for the treatment of bond faces prior to the application of Sikaflex® and Sikasil® adhesives and sealants.   Features: Enhanced adhesion on various substrates Short flash-off time Easy to use Transparent Areas of Application:Sika® Aktivator-205 is used to improve adhesion on non-porous substrates such as metals, plastics, ceramic screen prints, and painted surfaces. Seek manufacturer’s advice and perform tests on original substrates before using Sika® Aktivator-205 on materials prone to stress cracking. This product is suitable for experienced professional users only. Tests with actual substrates and conditions have to be performed to ensure adhesion and material compatibility.

Read more less

Fresh Water Inlet - 316 Stainless SteelThe Fresh Water Inlet is designed to provide a fresh water hookup to a pressurized water system while moored. Standard female swivel hose connector. Comes complete with a black plastic watertight plug for use when not connected to onshore water. Pipe size: 1/2" FIPT x 3/4" FGHT. Constructed of corrosion resistant investment cast 316 stainless steel. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Aluma Guard - 16oz. Spray BottleAluma Guard One-Step Protectant is the easy and safe way to restore and preserve aluminum and other metals including stainless steel, brass and chrome. Specially formulated by Rupp Marine, Aluma Guard forms a protective coating on surfaces that prevents penetration of harmful substances and restores a lasting shine. Guards against pitting and corrosion caused by the harsh effects of marine use (saltwater). Requires No Rubbing or Polishing. Sold individually. Specifications: Type: Metal Box Dimensions: 2"H x 4"W x 11"L WT: 1.5 lbs UPC: 784703101164

Read more less

6" Hole Shot Plate for Z-Lock™ Jack PlateREVOLUTIONARY...SIMPLE...UNIQUE...EXCITING.These are but a few of the comments coming from users of T-H Marine's HOT SHOT™ hole shot plates. This simple but revolutionary plate easily attaches to the bottom of our jack plate to provide an amazing 18 to 20 percent better hole shot. That's 2 to 3 seconds faster out of the hole. Hot Shot™ does this by dramatically reducing water drag on take-off as well as serving as a center trim tab. An added advantage is the ability to stay on a plane and virtually eliminate porpoising at lower speeds.Models available for Z-LOCK™ manual plates.  Features: Provides Improved Hole Shot Reduces Water Drag at Take Off Reduces Porpoising WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Dress White 2" Voltmeter (10-16 VDC)Perimeter-lighted White dial with bold Black graphics, White aluminum bezel, contoured Black pointer and flat glass lens.A voltmeter indicates the battery voltage and the general condition of the battery charging system.  The meter requires no warm-up and indicates voltage changes instantly.2" - Hole Size: 2.0625" (53mm)Specifications: Anti-scratch glass lens 12 VDC negative ground Can be adapted for 24 VDC systems Factory P/N VP9139*Sold as an Individual**Gauge Cover not IncludedThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Gauge Type: Voltmeter/Ammeter Series: Dress White Voltage - Input Range (Volts): 12/24 V Gauge Size: 2" Box Set: No Box Dimensions: 4"H x 4"W x 5"L WT: 0.3 lbs UPC: 759266131200 Quick Guide (pdf)

Read more less

Gator Patch 3" x 18" Fiberglass Reinforced Repair PatchJust Prep, Peel, and Stick - Reinforced Repair Patch that Cures in Just Minutes!Repairs and protects Kayaks, Canoes, and Boats with Fiberglass, Aluminum, and Plastic surfaces. The preferred choice for a Kayak keel guard and skid plate. Cures in Sunlight in under an hour - quickly repairing or protecting your plastic, fiberglass, or aluminum surface. Can be sanded and painted for a seamless finish.Features: Gator Patch is a UV-Cure Fiberglass Reinforced Repair Patch Quick fix for a permanent solution Watertight, Impenetrable Repair Patch, Kayak Keel Guard, and Skid Plate Available in 4 sizes: 3"x6",6"x9", 9"x 12", and 3"x18" Kayak Keel Guard A Prep-Peel-Stick application that cures simply with UV light in under an hour Will bond to metal, fiberglass, wood, plastic, and virtually anywhere you need protection Repairs almost any surface, moldable around flat or curved areas, dents, joints, or angles Made With Pride in The USA. Perfect in or out of the water!  Great for any Fiberglass or Aluminum Boat, Kayaks, Canoes, Containers, Tanks, Plumbing, and more! Can be drilled, tapped, sanded, or painted within an hour Gator Patch™ is easy to use and apply with our Prep-Peel-Stick application. Cures simply with UV light in under an hour. Gator Patch comes with the extraordinary bonding and reliability promise that 100,000s of clients have known for over 20 years.Available in 4 sizes: 3"x6", 6"x9", 9"x12" and a 3"x18" Kayak Keel Guard - suitable for any patch, repair, or hull protection.Installation Tips:Using the Gator Patch to protect your kayak will make drops, skids, concrete, and cracks a thing of the past – the easiest insurance on your expensive investment. A Fiberglass Resin Patch that bonds physically and chemically to your kayak or canoe – curing in UV Sunlight in under an hour. An Easy & Simple application for a permanent protection solution.  View the complete installation instructions below.Notice for Heavy Plastic Boats:Hulls weighing over 100 pounds – such as Bass Hunter style boats or larger kayaks may benefit from additional layers of Gator Patch to increase the thickness of the most heavily worn areas for a longer lifespan.

Read more less

G-Force Troll Cable Organizer - Black NeopreneWith the patented design of T-H Marine's Troll Jacket, you can protect and manage your trolling motor cables with ease!The G-Force Troll Jacket is a 2mm neoprene trolling motor wire and cable organizer. It measures 60” long and includes a velcro closure. While wrapped, the diameter is about 1.5”.For maximum compatibility for your setup, you can cut and trim the sides where your cables need to come out. This eliminates the need for zip ties along the factory cable cover. It also helps you bundle and organize adjacent wires, like those for your depth finder and HydroWave.Beyond organization, the Troll Jacket prevents exposure of factory cables. If your cables have electrical tape repair, the Troll Jacket gives an additional layer of defense against the elements.

Read more less

Motor Stik OutBoard Motor Support Stick - PairFeatures: Fits Over Trim Rams Supports Your Outboard While Trailering Takes the Pressure Off of Hydraulic System Most Outboards 150hp and Up Strong Aluminum Tubing with Molded Ends Safe for Salt or Fresh Water Note: Some Yamaha motors have a grease fitting on the port side ram. Use a single Motor Stik™ on the starboard side only in this application.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Tools Box Dimensions: 2"H x 5"W x 13"L WT: 1.15 lbs UPC: 733572067750

Read more less

16oz Stainless Steel CleanerThis is a phosphoric acid-based stainless steel cleaner. Features: It removes rust staining and surface corrosion from polished marine-grade stainless steel  Shelf Life at 23 degrees Celsius is 24 months  Specifications: pH Value: 1.0 Size: 16oz bottle Contents: Contains non-ionic surfactants < 5%  Recommended Applications: A brush is recommended, but cotton, a rag, or a sponge may be used Recommended UseUsed for cleaning rust staining and surface corrosion from polished marine-grade stainless steel.Surface PreparationApply the product to the area to be treated. Allow it to work for up to 30 minutes. Rinse well with fresh water and a sponge.Pre-treatmentClean with detergent.StorageThis product must be stored in accordance with national regulations. Keep the containers in a dry, cool, and well-ventilated space away from sources of heat and ignition. Containers must be kept tightly closed. Handle with care. Quick Guide (pdf)

Read more less

Chesapeake White SS 2" Fuel Level Gauge (E-1/2-F)Perimeter-lighted White dial with stylish Blue and White graphics, polished stainless steel bezel, contoured White pointer and domed glass lens.Fuel Level gauge operates by sending a low amperage current through the gauges meter to ground via a sending unit with variable resistance. The resistance of the sending units increase or decrease with the changes in pressure, temperature, etc...As the sender's resistance varies, the amount of current allowed to flow through it to ground changes and the meter deflects, showing the level of fuel.2" - Hole Size: 2.0625" (53mm)Specifications: Anti-scratch glass lens Perimeter lighted back light 12 VDC negative ground Can be adapted for 24 VDC systems Factory P/N GP9373*Sold as an Individual**Gauge Cover not IncludedThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Gauge Type: Fuel Level Series: Chesapeake White Gauge Size: 2" Box Set: No Voltage - Input Range (Volts): 12/24 V Box Dimensions: 4"H x 4"W x 5"L WT: 0.3 lbs UPC: 759266138018 Quick Guide (pdf)

Read more less

Heavy Duty Oxidation Remover16ozRemoves moderate oxidation, scratches, stains and tough water spots on all fiberglass gel coat marine or RV surfaces. Restores color by effectively removing surface degradation.Benefits Effortless application and wipe-off in full sun Product can be safely applied with a Dual Action Polisher Product can be applied by hand High Speed Rotary Non-Scratch Brings back to like-new condition VOC Compliant Specifications: Type: Waxes & Polishes Box Dimensions: 2"H x 4"W x 9"L WT: 1.3 lbs UPC: 070382149161

Read more less

30A 125V CordsetEEL ShorePower CordsetsOne Hand. A simple twist. Full Power.The EEL (Easily Engaged Lock) ShorePower Cordset has an industry first, jaw-clamp design providing one-handed operation and a secure waterproof seal which completely eliminates the need for a locking ring. The EEL connection is built for the harshest environments and is UL approved. This easy-to-use cordset features a built-in cord light which serves as an alert to boaters when the cord is left plugged in. And, best of all, it works with your current inlet. In addition to cordsets with the EEL System, Marinco also has a full set of Pigtail and Y adapters all using the new EEL technology.Features: Designed for use with standard inlets (NEMA)30A, 125V capacities; 25' length Cord sets meet global industry standards including ABYC and UL New wing-clamp technology provides a true, watertight connection every time Single-handed operation Eliminates the need for a sealing ring Secondary locking feature for added security Built-in LED cord light guides you to a secure connection every time, even in the dark WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Cordset Length: 25' Amperage: 30a Voltage: 125v Box Dimensions: 6"H x 11"W x 13"L WT: 10 lbs UPC: 093344051654 Owner's Manual (pdf)

Read more less

Perfect Pole - 5' to 9' ExtensionThe strongest, easiest-to-use cleaning extension poles on the market today.Patented Insta-just internal tracking system, with the exclusive Uni-Snap quick release mechanism, makes extending and collapsing the Perfect Pole quick and fool proof, eliminating frustrating alignment problems.  The button will pop up in the next hole, every time.  Changing accessories is a snap!Ideal for RV's and boats of all sizes.Features: Telescopes from 5' to 9'  No-look tracking system for foolproof adjustments   Teardop design makes Perfect Pole up to 67% stronger than other telescoping handles Comfortable hand grip  Designed to work with Swobbit System Uni-Snap quick release accessories *Sold as an Individual Specifications: Type: Tools & Accessories Box Dimensions: 1"H x 1"W x 66"L WT: 2.3 lbs UPC: 633590456607 Brochure (pdf)

Read more less

Marine Aerospace Protectant  - 32ozNo other product provides this much protection for your boat and water gear.  Use Aerospace Protectant to keep your boat’s seats, sails, hull and windows colorful and clean.  Marine Aerospace Protectant is a premium protectant designed to safeguard boats and boat equipment against the damaging effects of daily exposure to UV rays.  It’s safe for use on outdoor gear and apparel, too.Simply spray on and wipe dry to restore color and luster, repel stains and prevent fading even in the harshest marine conditions and sunniest climates.  Aerospace Marine will even help keep fishing gear clean and prevent inflatable boats from sticking together during storage.  And because it’s 100% free of grease-producing silicone oils and petroleum distillates, Aerospace is safe to use on all your outdoor materials - vinyl, rubber, fiberglass and more.No other protectant beautifies as intensely or preserves as powerfully. Keep your boat, water sport equipment and outdoor gear shiny season after season.Features: Powerful UV blockers prevent fading, cracking and premature aging Ideal for - Hypalon inflatable boats, wet/dry suits, tires, side-out seals, RV EDPM rubber roofing, helmets, visors, and goggles.  Not for use on unfinished leathers (such as suede), fabrics (canvas), floorings, clear plastics, gauge panels or headlights. Dries to a clear matte finish Restores lost color and luster Easy to use - Simply spray on and wipe dry Safe and effective for vinyl, Plexiglas®, carbon fiber, rubber, plastics and finished leather Made in the U.S.A. *Sold as an Individual WARNING: This product can expose you to chemicals including benzene which is known to the State of California to cause cancer, birth defects or other reproductive harm, and Ethylbenzene which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov. Specifications: Type: Corrosion Protection Box Dimensions: 3"H x 4"W x 11"L WT: 2.25 lbs UPC: 082043003507

Read more less

Sikaflex® 505UV High Performance Exterior Grade Sealant - 10.3oz(300ml) Catridge - WhiteSikaflex®-505UV is a one-component silane terminated polymer (STP) with excellent UV and weathering resistance, and excellent adhesion to a wide variety of substrates.Uses:Sikaflex®-505UV is suitable for use on a wide variety of substrates; including aluminum, steel, glass, marble, wood and many different types of plastic.Characteristics & Advantages Contains no solvents or isocyanates Low VOC content Excellent tooling characteristics Fast curing even at low temperatures Easily paintable Non-yellowing WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Quick Guide (pdf)

Read more less

Mercury 15, 20 EFI Remote Throttle/Tiller (2018-Present) & Tohatsu 9.9, 15, 20 EFI Remote Throttle/Tiller (2018+)TROLLMaster offers a variety of different servo mounting hardware kits to allow easy installation on the most popular kicker motors. The motor-specific hardware kit must be purchased as a separate item. As long as you know the make, HP and year of your kicker motor, you can determine which hardware kit you need.

Read more less

World's Best Rope Handle Bucket - 3.5 Gallon - BlackForget about rusty metal handles! An innovative rope handle design does not pierce the bucket cavity, which means no leaks or hardware failure. Because weight is distributed across the base of the rope, it won't tear the lip under heavy loads. The tough, heavily molded plastic is designed to last, making it the best bucket around!Makes for an Excellent: Boat bucket RV bucket Car wash bucket Storage bucket Trash bucket Fishing Bucket Specifications: Color: Black Size: 3.5-gallon bucket Dimensions (inch): 10.75" H x 12" W

Read more less

Frogmore Shrimp CleanerIntroducing the Frogmore Shrimp cleaner. This first-of-its-kind shrimp tool allows you to peel, devein, and butterfly shrimp in one single smooth motion. Elegantly designed and easy to use, it gives you a perfect shrimp every time.Toadfish Model Number: TFFSHRIMPTOOLFeatures: Point blade butterflies & cleans Top-quality stainless steel Full tang construction provides maximum strength Ergonomic handle  How to Use: You insert the tool right below the top of the shell. Then you push the tool forward, while at the same time sliding the shrimp upwards towards the handle. The entire shrimp peel will be left on the Frogmore cleaner. And the peeled, deveined, and butterflied shrimp will be left in your hand. A quick rinse and you're done.

Read more less

Trim Plate Retrator for ST TabsThe PR500 Bracket assembly enables Lectrotab SMART TABS to be set in two different positions without the need for any additional tools. When the bracket handle is in the “Down” position, the SMART TABS will function as trim tabs. When the bracket handle is in the “UP” position, SMART TABS will be fully retracted. The brackets are ideal for use when storing a boat, beaching a tender, or in very shallow water conditions, such as those found near the beach. Replaces the standard transom bracket.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

Trolling Motor Mount for MK, Garmin, Rhodan, & Power PoleThe Sea Swivel is a heavy-duty marine-grade pivoting bracket designed to maneuver a trolling motor in the correct position while being deployed. This bracket also has the benefit of being able to adjust the stowed position to match the angle of any boat. That means no more anchor hatches covered up and no more trolling motorheads hanging off the side of the boat. All that is needed is an 8" x 8" flat mounting surface and access under the gunwale to tighten the nut. During installation, it is recommended that users apply teff-gel or marine-grade grease to the main bolt threads and the bearing assembly.Features:Maneuverability and PositioningThe Sea Swivel offers a heavy-duty pivoting bracket that allows users to easily maneuver the trolling motor into the correct position while deployed. This is especially useful for maintaining proper control and direction while fishing or navigating in different conditions.Adjustable Stowed PositionThe ability to adjust the stowed position of the trolling motor to match the angle of the boat is a significant advantage. This means that the trolling motor won't interfere with anchor hatches or hang off the side of the boat when not in use, enhancing the boat's aesthetics and functionality.High-Quality MaterialsThe use of 7075T6 aluminum alloy, commonly found in the aerospace industry, provides peak strength and ensures the Sea Swivel's durability. This material choice suggests that the product is designed to withstand the rigors of marine environments and provide longevity.Corrosion ResistanceThe anodized finish is designed to protect the Sea Swivel from the harsh marine environment, which typically includes exposure to saltwater and other corrosive elements. This coating enhances the product's ability to resist rust and other forms of corrosion over time.Stainless Lock Pin and HardwareThe utilization of all 316 stainless lock pins and mounting hardware further enhances the product's resistance to corrosion, as 316 stainless steel is known for its exceptional corrosion resistance properties, making it well-suited for marine applications.Backing Plate for StrengthThe inclusion of a pre-cut backing plate to be placed under the mounting surface is a smart design choice. This additional plate strengthens the installation area, reducing the risk of damage or failure due to stress or strain over time.Easy InstallationThe patent-pending design and single-bolt mounting system contribute to streamlined installation processes. This can be a significant selling point for customers, as it saves time and effort during setup.*It is recommended that users apply teff-gel or marine-grade grease to the main bolt threads and the bearing assembly.CompatibilityQuick release bracket necessary for install with trolling motorComes pre-drilled for the quick release brackets for the followingMinn Kota Ulterra Terrova Quick release bracket models RTA 54/62 (fits all 36V permanent magnet motors)Minn Kota Quest Instinct Quest Terrova Quest Ulterra Quest Quick release bracket RTA 55/56 (fits all new Brushless/Quest motors)*Minn Kota RTA17 (fits all 24v motors for Smaller units)GarminKraken 24v/36v 48" to 110"Rhodan Large mount 6 bolt 36v 84"/96"108"/120" Smaller mount 4 bolt 24v Power PoleMOVE PV offshore trolling motors up to 96" shaft length (need a Sea Swivel XL for the 110" shaft length model)Limited Lifetime WarrantyFor salt water or fresh water use. Sea Swivel offers a limited lifetime warranty.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

Recon™ Quick Release Bracket - HD Composite - BlackRemoving the trolling motor from a boat is quick and easy with the Heavy-Duty Composite Quick Release Bracket. Compatible with all Lowrance electric steer trolling motors and most non-Lowrance electric steer motors. The trolling motor is fastened securely to the boat with the bracket’s locking U-bar design, and a security locking point is available for use with a padlock (sold separately). Features: Compatible with all Lowrance electric steer trolling motors and most non-Lowrance freshwater electric steer motors Locking the U-bar secures the trolling motor to the baseplate Designed for use in freshwater environments Available security locking point for use with padlock (sold separately)

Read more less

One Box Indication Unit for BOLT Electric SystemAn attractive and user-friendly, stand-alone helm control without the need for an external control unit. The functionality and “brains” of the control unit are engineered directly into a single, space-saving, and simple-to-install keypad. Reduce bow rise, plane faster, and correct listing. Features: Convenient “All Up” and “All Down” buttons Trim tab position LEDs always show you where your tabs are Auto tab retraction (tabs retract up when the ignition is powered off) Easy-to-install single lock nut design Backed by Bennett’s outstanding customer support This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

World's Best Rope Handle Bucket - 3.5 Gallon - WhiteForget about rusty metal handles! An innovative rope handle design does not pierce the bucket cavity, which means no leaks or hardware failure. Because weight is distributed across the base of the rope, it won't tear the lip under heavy loads. The tough, heavily molded plastic is designed to last, making it the best bucket around!Makes for an Excellent: Boat bucket RV bucket Car wash bucket Storage bucket Trash bucket Fishing Bucket Specifications: Color: White&nbsp; Size: 3.5-gallon bucket Dimensions (inch): 10.75" H x 12" W

Read more less

Adjustable Transom Saver - Composite - Roller/BoltProtect your investment with Attwood Transom Savers. A lifted outboard puts hundreds of foot-pounds of pressure on the transom - especially during traileringProtect your boat and engine with Attwood Transom Savers: Support the cantilevered weight of the motor Stabilize engine and steering mechanism when trailering The Attwood Difference: Tough components - You'll get long life from our adjustable toggles with replaceable rubber padsWARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Non-Tipping Can Cooler 2.0 - Universal Design - SeagrassThe Toadfish Non-Tipping Can Cooler 2.0 has a one-size-fits-all design. Much like the regular Toadfish Non-Tipping Can Cooler, this is the first of its kind—an un-spillable beverage cooler. Innovative SmartGrip technology allows the can cooler to stick to any smooth surface. From a lack of cup holders on a rocking boat to wagging dog tails, this product will keep your drink upright, accident-free, and icy cold. To use, simply place the can cooler on any smooth surface, and it will keep the drink in place (securely up-right).Features: Universal design fits bottles and 12oz cans (normal and slim) Seagrass can cooler  Cup-holder compatible SmartGrip Technology - Patented SmartGrip technology makes it hard to tip but easy to lift Double-Wall Vacuum Insulation - Keeps your drinks cold until the last sip Stainless Steel - Made with high-grade stainless steel, making them puncture & rust-resistant Rubber Locking Gasket - Removable rubber gasket to securely lock in the can

Read more less

Crab/Lobster Tool Set - 2 Shell Cutters & 4 Seafood ForksThe most innovative crab and lobster tools on the market. Everything you need to open and enjoy fresh, hard-shelled seafood without the mess. Also, for every product sold, Toadfish will replant new oyster beds to help clean our coastal waters. Let’s Put ‘Em Back.Toadfish Model Number: TFCRABLOBSETProducts Included:2x Shell CuttersFlawlessly cuts shells instead of smashing them. Creates less mess and stunning presentations. Works on all species of hard-shelled crustaceans: blue, stone, Dungeness, rock, and lobster. Includes a built-in bottle opener. Patent Pending.4x Seafood ForksA multi-use fork with a scoop on one end and a fork on the other, allowing you to pull out those hard-to-reach pieces of delicious meat with ease.For Seafood LoversWhen it comes to great seafood, it’s all about fast, simple access to the good stuff. Our pair of serrated cutters let you neatly open shells to quickly dive in. Use the multi-use forks with a helpful scoop on one end and a fork on the other. No chips, splinters, or frustration, just a great time digging in & feasting on your favorite meal.The Perfect Gift SetInvited to a beach cookout or seafood bash? Bring the host a Toadfish Crab & Lobster Tool Set and you’ve got a friend for life. Or host your own shellfish soiree with your set on display. Each piece is a delight for the senses, beautiful in looks, and a joy to hold with a super-comfortable ergonomic form.

Read more less

Soft Washing Tool Uni-Snap and AdapterA professional wash made quick and easy.  Holds plenty of soap and water.Not recommended for non-skid or rough surfaces. *Includes adapter and bonnet Features: Over 70 sq. inches of cleaning surface Safe for all finishes including paint, fiberglass, windows and enclosures Dual-axis swivel head follows curves and contours for quick washing Uses replacement bonnets SW19140 *Sold as an Individual Specifications: Type: Tools & Accessories Box Dimensions: 3"H x 8"W x 14"L WT: 0.7 lbs UPC: 633590191409 Brochure (pdf)

Read more less

Micro Remote-BluetoothMinn Kota's advanced GPS navigation system gives you full command of your trolling motor. But when you want simplified, compact control, grab the new waterproof Bluetooth Micro Remote accessory for quick command of Spot-Lock, speed, steering, and AutoPilot. Navigation systems can learn multiple remotes for increased flexibility.Features: Minn Kota trolling motors can learn multiple remotes, so you can use your standard remote and Micro Remote together Compatible only with Bluetooth-enabled Minn Kota navigation systems manufactured after 2017 Waterproof The remote is powered by one replaceable CR2450 coin-cell lithium battery. Includes neck lanyard

Read more less

When wiring, use these heavy-duty, 10-gauge connectors where a plug and socket can't be used. WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Terrova® 55 Trolling Motor with Wireless Remote - 12V - 55LB - 54"What makes Terrova® so popular? How about unlocking more boat control than ever before? Start with Minn Kota's most advanced GPS trolling system, including Spot-Lock®. Top it off with all the thrust you need to take on any water and an effortless stow and deploy. That's what makes this workhorse one of the most trusted, most capable, and most proven motors on the water.Advanced GPS Trolling SystemThe most-trusted navigation system in fishing. Terrova uses GPS to control your trolling motor with unrivaled features that keep you on the fish. Set spot locks, record paths, control speed and steering, and more. Minn Kota makes boat positioning and control automatic, and you can take command from the easy-to-read LCD screen of Terrova's wireless remote.Spot-Lock with JogSpot-Lock will hold you in place with unparalleled GPS accuracy. Available on GPS systems that are pre-installed, Spot-Lock gives you the power to stay right on top of any productive fishing spot, without touching your trolling motor. With the included heading sensor, you can use Jog to move your Spot-Lock location five feet in any direction. Activate Spot-Lock from the wireless remote or Humminbird fish finder.AutoPilot™Automatically navigate your boat in any direction you choose. Just point the head of your trolling motor in the direction you want to travel, activate AutoPilot™, and your trolling motor will keep you on that heading automatically, even correcting for wind, waves and current.Push-to-Test Battery MeterPress a button on the trolling motor head to get an instant status of how much battery life you have left.Digital Maximizer™Provides up to 5 times longer run time on a single battery charge. These variable speed trolling motors let you dial in your exact speed, and they deliver only as much power as you need, helping to conserve your battery for a full day of fishing.Weedless Wedge™ 2 PropWith swept-back flared blades to power through anything without battery-draining chopping and hacking, the Weedless Wedge™ 2 is one of the most trusted props in fishing.Indestructible Composite Shaft — Guaranteed for LifeAt the core of your Minn Kota trolling motor is an indestructible composite shaft. It's a Minn Kota exclusive, and they guarantee it for life.Mobile App CompatibilityControl Terrova directly from your Apple® or Android™ device with our mobile app. You get quick command of speed, steering, Spot-Lock, and AutoPilot — plus the ability to update software.Electric Foot Pedal - OptionalLow-profile design offers two steering options: heel/toe pedal and left/right steering buttons. Includes Spot-Lock activation, a rotary speed control dial, a momentary/constant on toggle, an AutoPilot on/off toggle, and an 18' cable with a waterproof connector plug.What's IncludedTerrova 55 lb. 54" motor, Wireless Remote, Lanyard, Heading Sensor, MKP-32 Prop and Mounting HardwareSpecifications: For Use In: Freshwater Shaft Length: 54" Voltage: 12 One-Boat Network Compatible: Yes QUEST Series: No Spot-Lock: Yes Built-In Sonar: None Control: Wireless Remote Auto/Stow Deploy: No Power Trim: No Power Steering: Yes Lift-Assist: No Bowguard: No Wireless Remote: Yes i-Pilot Link (GPS): No i-Pilot (GPS): No AutoPilot: No CoPilot: No Speeds: Variable Digital Maximizer: Yes Battery Meter: Yes Max Amp Draw: 50 Mount Style: Bolt-On Mounting Location: Bow-mount Motor Style: Electric-steer Prop: Weedless Wedge 2 (MKP-32) Warranty: Two-year warranty Specifications: Autopilot: Yes Built-In Transducer: No Control Type: Wireless Remote Included Propeller: MKP-32 Mounting Style: Bow Salt Water/Fresh Water: Fresh Series: Terrova Shaft Length (Inches): 54" Thrust (Pounds): 55 lbs Voltage - Input Range (Volts): 12v Box Dimensions: 10"H x 16"W x 68"L WT: 48.75 lbs UPC: 029402050581 Owner's Manual (pdf)

Read more less