Nut w/FerruleT1127Compression fitting connects tubing to HPUWARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

Protective Cover for CFX3 & CFX5 45 Electric CoolersThe Dometic CFX3 PC45 protective cover is designed to protect your CFX3 from damage on even the most rugged adventures. The CFX3 PC45 is made from durable thermoformed EVA foam and 1200D nylon to protect against dirt, dust, and scuff damage. Roam free from worry with a CFX3 PC45.Features: Custom-fit to CFX5 45 (also fits CFX3 45) Built with EVA foam and 1200D nylon for rugged protection Cutout for built-in bottle opener and user interface Zippered front + side pockets keep cords and tools in reach Designed to prevent overheating for peak performance

Read more less

Temperature Sender 250°F/120°C Dual FG - 1/4-18 NPTF Features: Ground - Floating Connection - .25" Spade Voltage - 6-24V Thread - 1/4-18 NPTF Component Reference No. - 805/1/4 Max. Temperature Scale - 250°F/120°C  *Sold as an IndividualWARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Color: Silver Box Dimensions: 1"H x 6"W x 8"L WT: 0.15 lbs UPC: 754059003092 Brochure (pdf)

Read more less

White Nylon Wire Tie MountThe AT-3 tie mount is smaller for panel and other small space applications. This part is molded in white nylon and is sized for a #3 wire tie with a maximum width of .20". Average pull strength is about 50 lbs. The square base measures .44" wide. Use this smaller wire tie for runs with only a few wires or where space prevents use of our larger tie mounts. Excellent for mounting compass wires on center console boats and for overhead panel runs.

Read more less

Flex TrimLength: 25'"A": 5/32""B": 9/16"Color: BlackTACO Metals supplies quality trim that is designed to protect boat interiors and exteriors from the harsh marine environment.Trim & MouldingTrim and moulding products provide finish, protection and structural integrity. TACO trim and moulding products are the best in the industry and are used extensively throughout boat interiors and exteriors.MaterialsDepending on the product line, TACO's trim and moulding products are offered in aluminum, vinyl and specially formulated rubber compounds. TACO insists on using prime billet 6000 series aluminum alloys to ensure superior structural strength, precise bending and long-lasting performance. Vinyl and plastic products are made from prime resin and warranted for 5 years. Covers unfinished edges and follows almost any contour or radius Made of flexible PVC Integrated interior aluminum clip and gripping tongue ensures a better fit This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

Mercury 5 & 6 (All Years) & Nissan/Tohatsu 5 & 6 (1995 - Present)TROLLMaster offers a variety of different servo mounting hardware kits to allow easy installation on the most popular kicker motors. The motor-specific hardware kit must be purchased as a separate item. As long as you know the make, HP and year of your kicker motor, you can determine which hardware kit you need.

Read more less

Flexible Rope & Cord BrushFlexible Rope & Cord Brush for use on dirty ropes and other tubular items.Floating Flexible Rope & Cord Brush is the perfect way to clean 1/2" - 1" rope. Simple to use, easy to store, the flexible Rope & Cord brush is ideal for use on twisted and braided lines and rope and other tubular items.Hundreds of great uses: Dock Lines Rigging Ropes Hoses Power Cables Railings Specifications: Type: Tools & Accessories Box Dimensions: 2"H x 5"W x 7"L WT: 0.2 lbs UPC: 703485120880

Read more less

Shaft AnodeMaterial: AluminumOuter Diameter: 3.02"Inner Diameter: 2"Height: 3.25"Weight: 0.95lbsHoles: 4 Specifications: Material: Aluminum Box Dimensions: 3"H x 3"W x 3"L WT: 1.1 lbs UPC: 8059617812492 Quick Guide (pdf)Owner's Manual (pdf)

Read more less

3-Bow Acrylic Bimini Top Fabric & Storage Boot - Pacific Blue6' L x 67"-72" W x H Black Acrylic 3-Bow Bimini Canvas with Storage Boot (602A-02). Carver 3-Bow bimini tops are suitable for a wide variety of boats. Carver 3-Bow tops are the best way to protect yourself from the elements while attractively complementing your boat. From 30" high for tournament ski boats to 36"-46" high for V-Hulls and cuddy cabins to 54"-60" high for center console fishing boats. All standard tops are constructed of 7/8" brite-dipped anodized heavy wall aluminum tubing with high-grade black nylon fittings. Stainless steel fitting upgrades are also available, as well as complete 7/8" 316 grade stainless steel frames.Features: Canvas Binding: 100% marine-grade acrylic Weather-Resistant: Anti-wick thread used throughout canvas construction Professional Stitching: No raw edges Best warranty in the business based on fabric selection Made in the USA Specifications: Length: 6' Fits Frame Width: 67"-72" Bow Type: 3-Bow Color: Pacific Blue What's In The Box? Bimini Canvas Storage Boot

Read more less

3-Bow Acrylic Bimini Top Fabric & Storage Boot - Grey6' L x 67"-72" W x H Black Acrylic 3-Bow Bimini Canvas with Storage Boot (602A-02). Carver 3-Bow bimini tops are suitable for a wide variety of boats. Carver 3-Bow tops are the best way to protect yourself from the elements while attractively complementing your boat. From 30" high for tournament ski boats to 36"-46" high for V-Hulls and cuddy cabins to 54"-60" high for center console fishing boats. All standard tops are constructed of 7/8" brite-dipped anodized heavy wall aluminum tubing with high-grade black nylon fittings. Stainless steel fitting upgrades are also available, as well as complete 7/8" 316 grade stainless steel frames.Features: Canvas Binding: 100% marine-grade acrylic Weather-Resistant: Anti-wick thread used throughout canvas construction Professional Stitching: No raw edges Best warranty in the business based on fabric selection Made in the USA Specifications: Length: 6' Fits Frame Width: 67"-72" Bow Type: 3-Bow Color: Grey What's In The Box? Bimini Canvas Storage Boot

Read more less

3-Bow Acrylic Bimini Top Fabric & Storage Boot - Black6' L x 67"-72" W x H Black Acrylic 3-Bow Bimini Canvas with Storage Boot (602A-02). Carver 3-Bow bimini tops are suitable for a wide variety of boats. Carver 3-Bow tops are the best way to protect yourself from the elements while attractively complementing your boat. From 30" high for tournament ski boats to 36"-46" high for V-Hulls and cuddy cabins to 54"-60" high for center console fishing boats. All standard tops are constructed of 7/8" brite-dipped anodized heavy wall aluminum tubing with high-grade black nylon fittings. Stainless steel fitting upgrades are also available, as well as complete 7/8" 316 grade stainless steel frames.Features: Canvas Binding: 100% marine-grade acrylic Weather-Resistant: Anti-wick thread used throughout canvas construction Professional Stitching: No raw edges Best warranty in the business based on fabric selection Made in the USA Specifications: Length: 6' Fits Frame Width: 67"-72" Bow Type: 3-Bow Color: Black What's In The Box? Bimini Canvas Storage Boot

Read more less

Silicone Remover - 200mlRemove old PropOne coatings from your propellers and running gear with ease using PropOne Paint Stripper and Silicone Remover.Features: Easy application – Brush on and it will do the rest! Reduce dust and noise – Easy removal Effectively allows multiple stubborn layers to be removed Marine Grade: DCM & NMP free* PropOne Silicone Remover is designed to remove PropOne Clear Coat. It can also be used as a general-purpose silicone remover to remove thin coatings.PropOne Paint Stripper will remove paints, varnishes, and lacquers. It is primarily to be used with PropOne Silicone Remover for the removal of PropOne Primer Coat.Do not use on plastic surfaces or resin-impregnated wood fibreboard materials.For plastics and other delicate surfaces, test a small area first to ensure Silicone Remover & Paint Stripper does not affect the underlying substrate.Application: Remove all marine growth from the surface. Apply Silicone Remover approximately. 2mm thick using a brush. Tip: Prevent drying out by covering the treated area with cling wrap in hot/windy climates. Do not allow the remover to come in contact with water.  Leave in contact for 2-3 hours or until softened. Remove with a stiff nylon or wire brush, scrubbing in a circular motion. Wipe off any remaining residue with a xylene or toluene-soaked cloth. If any coating remains after scraping, apply a second coat. Once done, proceed with Paint Stripper *Does not contain toxic Dichloromethane and N-Methylpyrrolldone

Read more less

MKR-DSC-14 DSC Transducer Adapter Cable - Garmin® 8-PINThe adapter connects select Garmin fish finders with Minn Kota's built-in Dual Spectrum CHIRP transducer on your trolling motor. Shielded, IP68-rated waterproof connectors are metal-tipped to prevent sonar interference. *Only provides traditional 2D sonar.Features: Connects select Garmin® fish finders with a built-in Dual Spectrum CHIRP transducer Shielded cable for crystal-clear sonar performance Waterproof heavy-duty composite connector Compatible with 2D sonar only

Read more less

RTA-61 Cable-Steer Quick Release BracketFor quick, easy removal of your cable-steer, bow-mount trolling motor. The extruded aluminum design with side screws provides a quiet and secure locking system. Fits foot control motors with up to a 45" shaft and hand control motors with up to a 52" shaft. They are designed to handle the increased torque of QUEST series motors.Features: Recommended for the higher thrust associated with Ultrex™ QUEST™ series motors Allows trolling motors to be quickly removed from and reattached to the boat deck Top and bottom plates slide together and are tightened/secured to one another using dual-locking hardware Solid, anodized aluminum construction Includes both 5/16" and 1/4" stainless steel mounting hardware Brackets can be secured with a padlock (not included) for additional security Fits 45" shafts and smaller foot-control motors and 52" shafts and smaller hand-control motors

Read more less

5 Gallon White Bucket Kit - Includes Bucket, Caddy, Grate Seat, Buff Magic, Pro Polish Brite Wash, SMC & Serious ShineThe Ultimate One Bucket System is the complete storage and detailing solution! Turn an ordinary 5-gallon bucket into an extraordinary multi purpose utility item that will simultaneously transform your washing experience and gear storage. This version is packed with Shurhold detailing chemicals to keep your toys Clean-N-Simple!The Ultimate ONE Bucket System includes: World's Best Rope Handle 5 gallon Bucket in black or white. Bucket Lid / Padded Seat combo Buckt Grate (Keeps your wash utensils in clean water) Bucket Caddy (Keeps everything you store in your bucket organized) Bucket Base (So your bucket won't slip or tip) Plus included inside the Ultimate ONE Bucket system: Brite Wash 32oz  Pro Polish Wax 16oz SMC Cleaner 32oz Buff Magic Compound 22oz Serious Shine 16oz Everything you need to care for your prized possession in package. Specifications: Type: Tools & Accessories Box Dimensions: 13"H x 13"W x 16"L WT: 14.75 lbs UPC: 703485121177

Read more less

Tea Tree Power Gel - 8oz Tea Tree Power is the all-natural marine grade odor eliminator containing a proprietary blend of 100% Australian Tea Tree Oil and other natural ingredients. Its' powerful, yet pleasant smelling vapors, diffuse throughout your cabin and lockers, attacking and eliminating the source of unpleasant odors caused by mold, mildew, and bacteria.Tea Tree Power Gel slowly evaporates to provide continuous, natural, and long-lasting odor control for up to 3 months. It penetrates deep into porous materials (cushions, carpets, and upholstery) delivering a deep cleaning with enduring odor protection.The 8 oz. size will take care of your main salon and guest quarters on a 30-40' boat. You can also place it in your air handling unit to deliver its vapors through-out your boat. At home, place one in your media room/man cave to control odors. Place a jar in your kitchen and family room — it'll circulate to give you and your family clean, healthy air. Specifications: Type: Fabric & upholstery Box Dimensions: 3"H x 4"W x 4"L WT: 0.65 lbs UPC: 028026191151

Read more less

Serious Shine Quick Detailer - 14ozCleans, polishes, and protects almost any surface in one step without greasy, artificial residue.The perfect one step detailer! Serious Shine cleans, polishes, and protects virtually any solid surface in one easy step, leaving no greasy, artificial residue. Also, contains UV inhibitors and anti-static properties, further protecting all types of surfaces. Serious Shine is the perfect quick detailer. CLEAN, POLISH & PROTECT In Car & Rv Vinyl Seating Dash Board Electronic Touch Screens Glass Clear Coat Wheels & Tires Around the Boat Hull Cockpit Cabin Eisenglass Vinyl Seating Fiberglass In the Home Mirrors Stainless Steel Appliances Shower Glass Doors Windows Solid Surface Countertops and much more... This unique formula provides high gloss and a UV protective coating that also repels water. Now featuring a integrated click close spray nozzle and a rust resistant can. MADE IN USA. Specifications: Type: Waxes & Polishes Box Dimensions: 3"H x 3"W x 8"L WT: 1.05 lbs UPC: 703485120071

Read more less

Faucet Waxx Plus - 7.6oz BottleKeeps faucets & fixtures looking fabulous. Seals, polishes & protects. Exclusive creme-like carnauba & beeswax formula won’t scratch.Safe For:Gold-plated finishes, living finishes, oil-rubbed finishes, clearcoat, lacquer, acrylics, fiberglass, powdercoat, polyurethane, granite, marble, Corian,® and other solid surfaces. Will not dull polished metal.Use On:Faucets, doors, outdoor lighting fixtures, tubs, showers, vanities, fireplace doors...Removes & Protects Against:Fingerprints, carbon, soot, makeup, hair spray, soap & lime desposts. Specifications: Type: Waxes & Polishes Box Dimensions: 1"H x 3"W x 7"L WT: 0.6 lbs UPC: 065925026856

Read more less

Riptide Maxxum RT70/SM/L-D/SC Bow-Mount Trolling Motor - 24v-70lb-52"Saltwater Bow MountPrecision maneuverability. Accurate bait presentation. Meticulous speed control. You count on your trolling motor for a lot. And along the way, it has to fight corrosion, run quietly and perform with flawless reliability. Riptide® SM is the trusted powerhouse that meets those challenges head on, keeping you in position to make the catch of the day, every day.Riptide SM MountTake to the water with the confidence to power through anything. Tournament-tested, the rugged mount on Riptide SM resists corrosion and performs with flawless reliability. When stowed, the SM mount won't budge, flex or vibrate.Latch & Door DesignLatch & Door models feature non-binding nylon inserts and anti-seize lubricant for a lifetime of trouble-free use. It allows the motor to remove quickly and easily for safe storage.5 SpeedThis motor features five variable speeds (fwd, rev).Quick-Lock Cam Depth AdjusterChange depths simply and securely with the Quick-Lock cam adjuster. It makes depth adjustment simple and locks in tight to keep your motor right where you want it.Tilt/Extend TillerGet the best of both worlds on your hand control motor with the new Tilt/Extend Tiller. It can both tilt (up to 45°) and extend (6") to fit the way you fish.Push-to-Test Battery Gauge - Riptide SMGet an instant "state of charge" with this easy-to-read gauge.Weedless Wedge 2 PropPush weeds away and take on the thick stuff without battery-draining chopping and hacking. Weedless Wedge™ 2 features swept-back, flared blades for unrelenting, reliable prop performance.Advanced Corrosion ProtectionRiptide motors are impervious to saltwater's corrosive effects, thanks to premium-grade marine alloys and aluminum upper arms. Metals undergo a rigid multi-step cleaning process before being anodized or coated with a special zinc dichromate armor plating. All components are then finished with a durable 5-mil TGIC polyester, powder coat paint. When it's all done, you're left with unequaled corrosion protection.Full Encapsulated ElectronicsMarine-grade urethane fully encapsulates Riptide control boards to protect the electronic circuitry. Also, all electrical connections are sealed with liquid-tight heat shrink tubing to form an impregnable barrier against saltwater.Sacrificial AnodeGalvanic corrosion occurs when two dissimilar metals come into electrical contact through saltwater. Riptide fights back with a sacrificial zinc anode, a composite shaft and properly balanced materials that are close in electrical potential. The result is a motor that's completely protected from saltwater's destructive forces.Indestructible Composite Shaft - Guaranteed For Life!Pound for pound, our composite shaft is stronger than steel. It flexes on impact and won't break, kink or corrode. That's why we're confident enough to make it the only trolling motor shaft that's guaranteed for life.Two-Year WarrantyThis motor is backed up with Minn Kota's two-year warranty.Specifications Control: Tilt/Extend Tiller Volts: 24 Max Thrust: 70 lbs. Shaft Length: 52" Speed Control: 5 Fwd/3 Rev Max. Amp Draw: 42 Prop: Weedless Wedge 2 (MKP-32) WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Included Propeller: MKP-32 Autopilot: No Control Type: Tilt/Extend Tiller Mounting Style: Bow Salt Water/Fresh Water: Salt Shaft Length (Inches): 52" Thrust (Pounds): 70 lbs Built-In Transducer: No Voltage - Input Range (Volts): 24v Series: Riptide Box Dimensions: 9"H x 20"W x 68"L WT: 53.5 lbs UPC: 029402033157 Owner's Manual (pdf)

Read more less

101 XD Actuator- 12 Volt- 2-1/4  Stroke with Mounting HardwareThe 101 XD Actuator is used mostly with HD, XD, High Performance and Super Strong tabs. 2.25 stroke. Overall length (tip to tip) is 113/8 inches.   Instant response electric actuators are made of high impact glass fiber filled, ultraviolet-resistant nylon material with 316 super buff stainless steel tubing.Specifications: Newly implemented Anti Extrusion Ring (AXR) seal stabilization system. Stronger top cap and mounting clevis design Improved pressure-tight torx screws Integrated wiper seal at actuator base Molded-in brass thrust bearing design Thicker and stronger motor housing wall Improved O-Ring design for more consistent seal Over-molded cable providing a stronger tighter seal Upper mounting bracket with gland seal Features: Lenco's ballscrew design is more reliable and twice as powerful compared to typical hydraulics Lenco's tough, high-torque actuator motor easily pushes 500 pounds. Lenco Actuator connections use waterproof "Plug & Play" Deutsch connectors eliminating the possibility of water intrusion. 12 Volt 5/16" mounting hardware 6 foot cable WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Quick Guide (pdf)

Read more less

Weedless Wedge™ 2 Props (MKP-33) Minn Kota®s exclusive prop is the only of its kind that is 100 percent weedless. Unique design features swept-back and flared blades to "wedge" weeds away while conserving battery power. Moves through heavy vegetation, even at slow speeds. Motor Diameter:   4"Prop Nut Kit:        "E" Fits Motor Models With Serial Number Prefix "WW"TERROVA 80, TERROVA 80/US2, TERROVA 80/AP, TERROVA 80/AP/US2, TERROVA 101, TERROVA 101/US2, TERROVA 101/AP, TERROVA 101/AP/US2, MAX 80, MAX 80/BG /US2, MAX 80/US, MAX 80/H/3X, MAX 101, MAX 101/US, MAX 101/h, MAX 101/H/3X, MAX PRO 80, MAX PRO 80/BG /US2, MAX PRO 80/US, MAX PRO 101, MAX PRO 101/BG /US2, MAX PRO 101/US, MAX 80T, MAX 80/H, 80PD, 80PD/AP, 80PD/US, 80PD/AP/US, VECTOR 80/3X, VECTOR 101/3X, VANTAGE 80, VANTAGE 101, RT80/ST /CP, RT80/ST/CP/AP, RT101/ST/CP/AP, RT PRO 80, RT PRO 101, RT80/SM/L&D, RT80/SM/BG, RT80SM/BG/3X, RT80/SM/L&D/3X, RT101/SM/BG, RT101/SM/BG/3X, RT80/B, RT80/B/L&D, RT80/B/3X, RT80/B/L&D/3X, RT80/S, RT80/S/3X, RT101/B, RT101/B/3X, RT 101/S, RT101/S/3X, RT80/AP, MK80EM, MK101EM, MK160EM, MK202EM, RT 80EM, RT 101EM, RT 160EM, RT 202EM, RT101/SF, RT80/SF, FORTREX 101/US2, FORTREX 101, FORTREX 80/US2, FORTREX 80, TRAXXIS 80WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Brochure (pdf)

Read more less

BA-130 Break Away MountThe CMC BA-130 Breakaway Unit is designed for boaters navigating shallow, debris-heavy waters, allowing for safe passage over obstacles. It minimizes damage to both the boat and motor while providing up to 45 degrees of movement.The BA-130 is rated for outboard motors up to a maximum of 130 H.P. The unit is mounted between the boat transom and the outboard motor. It is designed to help minimize damage to the outboard motor and boat transom only when an obstruction is encountered while running at speeds under 5 M.P.H. in the forward direction. As it encounters an obstruction, momentum causes the motor to deflect and rotate up to 45 degrees to slide over the obstruction. A drawbar spring is incorporated in the unit to help return the motor to its normal position. The drawbar spring also holds the motor at the normal position while operating in the reverse direction at low R.P.M. The BA-130 is not designed to encounter obstructions while the boat is being operated in the reverse direction.The unit is pre-drilled with the standard B.I.A. hole pattern. For motors that have clamps with thumb screws, CMC part #13022 Transom Clamp Adapter is required. Product weight is 28 pounds (shipping weight is 33 pounds) and carries a limited 1-year warranty against defects in workmanship.Features: Rated for outboard motors up to 130 H.P. for enhanced versatility. Enables safe navigation at speeds under 5 M.P.H. in the forward direction. Features spring return technology to ensure the motor returns to its original position after encountering obstructions. Glide safely over submerged logs or debris at low speeds Offers 45 degrees of movement Spring returns the motor to the standard running position Standard B.I.A. hole pattern Specifications: Maximum Horse Power: 130 Recommended Speed: Less Than 5 mph Direction: Forward Only Weight: 28 lbs WARNING: The BA-130 is rated for outboard motors up to a maximum of 130 H.P. Do not encounter obstructions at speeds over 5 M.P.H and only in the forward direction. The BA-130 is not designed to encounter obstructions while the boat is being operated in the reverse direction.

Read more less

GP1301 InstrumentPod Precut w/3-3.6" Holes f/9.5" GuardNavPod's InstrumentPod GP1301 for 9.5" Guard is used for mounting three instruments in a single NavPod at the helm or companionway.An InstrumentPod can be mounted on a StraightGuard or use a Double Bend AngleGuard to fit an InstrumentPod on the top vertical section and SailPod below on the angled section. It can also be used with the SK312 Companionway Mount for positioning sailing instruments above the companionway.All InstrumentPods Include: Acrylic capped ABS plastic Chromed stainless steel tamper-proof fasteners Double seal for watertight integrity Models are available pre-cut for popular electronics Stainless steel mounting hardware and mounting gaskets This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Cut/Uncut: Cut Mounting Style: Pedestal Box Dimensions: 6"H x 8"W x 18"L WT: 4 lbs UPC: 659988107838

Read more less

AT-5B Large Black Nylon Wire Tie Mount - Qty. 500The AT-5 tie mount is designed to be set into wet resin during the hull lay up or bonded with our acrylic adhesives. It's designed for a #5 wire tie and has an average pull strength of 150 lbs. It's approved for submerged bilge applications. Stop putting plywood in your hull just to have a place to drive wire tie screws. Saves material and labor costs!

Read more less

Pull Rope & Cleat KitReplace the pull handle, rope, and cleats on your compatible Force® Current kayak trolling motor with this kit.

Read more less

Rubberized Undercoating - 24oz Aerosol Can - WhiteRubberized Undercoating is a premium, single-component, paintable, textured coating for sound dampening, chip resistance, rust protection, and corrosion protection.  Features: OEM recommended Uniform final appearance Quality asphalt-free formula Paintable without bleed-through Sound-dampening properties Aerosol includes a straw for tight spots Fast-drying Chip and corrosion resistant Applications:Properly prepped and primed surfacesProperties: 24 oz. Aerosol White Paintable Distance: 6 - 8" Coats: 2 - 3 medium wet Flash time: 3 - 5 minutes Top Coat time: 30 minutes

Read more less

2K Urethane Chip Guard Kit2K Urethane Chip Guard is a job-sized, two-component, shake-and-shoot, textured coating for reproducing a variety of OE textures and chip guards. Two-component system helps eliminate common problems seen with one-component products, such as long flash times, pinholes, solvent trap, delamination, and solubility.Features: OEM recommended 2K durability with 1K convenience Reproduces fine to coarse and light to heavy OE textures Builds heavy textures without trapping solvent No flash time required between coats 50 state compliant Pinhole free Easy-to-use shake-and-shoot system R.O. billable unit 16 defined textures with detailed instructions Non-yellowing and non-staining Tintable, paintable, or can be used as a textured top coat Impact and chemical resistant Excellent for sound dampening Applications: Steel Aluminum Galvanized steel Existing OEM paint Polyester fillers E-coat Fiberglass SMC and FRP Epoxy primer 2K urethane primer and sealer Properties: Opaque gray 12 oz. (mixed) kit Produces a variety of textures Pot Life @ 70°F and 50% R.H.: 20 minutes Flash Time: 0 – 20 minutes Paint Time: 20 minutes – 4 hours

Read more less

MKA-57 Quick Release BracketThe bracket and top plate allow you to easily slide the motor inboard (10") or easily remove it for storage and security. Features anodized aluminum construction with stainless steel components and hardware for optimal corrosion protection in all saltwater or freshwater environments.Features: Slide motor inboard 10" for a better boat cover fit and more clearance when launching the boat Designed specifically for motors featuring QUEST technology to meet the increased stress created by high-thrust motors and long shaft lengths Allows trolling motors to be quickly removed from and reattached to the boat deck The dual Cam-lock design reduces bracket movement and noise Includes stainless steel mounting hardware, a lanyard, and a locking pin Upper and lower plates include slots for securing with a padlock (not included) for added security Compatible with electric steer motors featuring QUEST technology Designed for use in freshwater or saltwater

Read more less

Deck Mount Stabilizer KitUse this to stabilize your Force® Kraken Trolling motor when in the stowed position.

Read more less

Riptide Terrova® 80 Trolling Motor with Wireless Remote - 24V - 80LB - 72"What makes Riptide Terrova® so popular in Saltwater? How about unlocking more boat control than ever before? Start with Minn Kota's most advanced GPS trolling system, including Spot-Lock®. Top it off with all the thrust you need to take on any water and an effortless stow and deploy. That's what makes this workhorse one of the most trusted, most capable, and most proven motors on the water.Advanced GPS Trolling SystemThe most-trusted navigation system in fishing. Riptide Terrova uses GPS to control your trolling motor with unrivaled features that keep you on the fish. Set Spot-Locks, record paths, control speed and steering, and more. Minn Kota makes boat positioning and controls automatic, and you can take command from the easy-to-read LCD screen of Riptide Terrova's wireless remote.Spot-Lock with JogSpot-Lock will hold you in place with unparalleled GPS accuracy. Available on GPS systems that are pre-installed, Spot-Lock gives you the power to stay right on top of any productive fishing spot, without touching your trolling motor. With the included heading sensor, you can use Jog to move your Spot-Lock location five feet in any direction. Activate Spot-Lock from the wireless remote or Humminbird fish finder.AutoPilot™Automatically navigate your boat in any direction you choose. Just point the head of your trolling motor in the direction you want to travel, activate AutoPilot™, and your trolling motor will keep you on that heading automatically, even correcting for wind, waves, and current.Push-to-Test Battery MeterPress a button on the trolling motor head to get an instant status of how much battery life you have left.Weedless Wedge™ 2 PropWith swept-back flared blades to power through anything without battery-draining chopping and hacking, the Weedless Wedge™ 2 is one of the most trusted props in fishing.Indestructible Composite Shaft — Guaranteed for LifeAt the core of your Minn Kota trolling motor is an indestructible composite shaft. It's a Minn Kota exclusive, and they guarantee it for life.Mobile App CompatibilityControl Terrova directly from your Apple® or Android™ device with our mobile app. You get quick command of speed, steering, Spot-Lock and AutoPilot — plus the ability to update software.Advanced Corrosion ProtectionRiptide® motor lower unit housings are grit-blasted, then coated in aluminum to prevent oxidization and rust. Then, a final layer of powder-coated paint provides the ultimate protection.What's IncludedRiptide Terrova 80 lb. 72" motor, Wireless Remote, Lanyard, Heading Sensor, MKP-33 Prop and Mounting HardwareSpecifications: For Use In: Saltwater Shaft Length: 72" Voltage: 24 One-Boat Network Compatible: Yes QUEST Series: No Spot-Lock: Yes Built-In Sonar: None Foot Pedal Style: Not included Control: Wireless remote Auto/Stow Deploy: No Power Trim: No Power Steering: Yes Lift-Assist: No Bowguard: No Wireless Remote: Yes i-Pilot Link (GPS): No i-Pilot (GPS): No AutoPilot: No CoPilot: No Speeds: Variable Digital Maximizer: No Battery Meter: Yes Max Amp Draw: 56 Mount Style: Bolt-On Mounting Location: Bow-mount Motor Style: Electric-steer Prop: Weedless Wedge 2 (MKP-33) Warranty: Two-year warranty Specifications: Built-In Transducer: No Control Type: Wireless Remote Included Propeller: MKP-38 Mounting Style: Bow Salt Water/Fresh Water: Salt Series: Riptide Terrova Shaft Length (Inches): 72" Thrust (Pounds): 80 lbs Voltage - Input Range (Volts): 24v Box Dimensions: 10"H x 16"W x 86"L WT: 59.05 lbs UPC: 029402050802 Owner's Manual (pdf)

Read more less

SWIVL-EZE Lock'N-Pin 3/4" Pedestal Kit 13" Post 7" x 7" Stainless Steel Base Plate ThreadedFeatures: Includes 7" x 7" stainless steel threaded base plate, black E-coated seat mount and 13" high seat post The 3/4" system gives you outstanding economical performance Great for adding seating to fishing, pontoon or cruising boats Lock'N-Pin products meet ABYC Standard

Read more less

MKR-MDI-2 Humminbird HELIX MDI Sonar Adapter Cable for HELIX 7MEGA Imaging® uses high-frequency sonar so you can easily distinguish fish from structure, see the direction fish are facing and even target individual species. And now with MEGA Imaging+, you'll be able to scan deeper and wider without sacrificing clarity. Adapter connects your Humminbird HELIX 7 G3/G4 fish finder with a built-in MEGA Down Imaging transducer on your trolling motor.  Connects your Humminbird HELIX fish finder to a Minn Kota motor equipped with Built-In MEGA Down Imaging Shielded cable for crystal-clear MEGA Down Imaging sonar performance Compatible with HELIX 7 models Adapter not required for SOLIX models Cable length: 30 inches Compatible Units:HELIX 7 CHIRP GPS G2N*/G3NThe built-in transducer cannot supply MEGA Down Imaging to Humminbird models that do not already have the capability. If you have a G2/G2N or a G3/G3N HELIX that is not a MEGA SI or MEGA DI model, you will still get 2D CHIRP Digital Sonar from the transducer.*HELIX G2 and G2N units need to be running the latest software update to view sonar from Built-In MEGA Down Imaging motors.

Read more less

ScuffBuster™ XL - 9" x 8.75" - Solid - 22G - Stainless SteelProtect Your Boat from Trailer Rollers - Enhance Your Boat's Appearance & Prevent Unsightly MarringThe Megaware ScuffBuster™ protects your boat from unsightly marring. Made from anti-corrosive, 22-gauge 304 stainless steel, Megaware ScuffBuster™ products attach to your boat’s surface with the highest quality materials and 3M® pressure-sensitive adhesives.WarrantyMegaware guarantees your Megaware ScuffBuster™ for a period of one year from the date of purchase. Please retain receipt for proof of purchase date.Features: Protect Your Boat's Gelcoat Minimize Roller and Trailer Scuffs Bend to Conform to Hull Mirror Polished Finish Specifications: Color: Stainless Box Dimensions: 1"H x 11"W x 11"L WT: 0.75 lbs UPC: 672057806371 Brochure (pdf)

Read more less

Reed Switch Fuel Sender - 200 MMMost aftermarket fuel senders use a rotating float arm and resistance cards to measure the amount of fuel in a tank which can lead to erratic pointer movements.  This revolutionary design comes with many benefits!  This is ideal for applications where a conventional swing arm will not fit due to clearance issues.  The tubular design acts as a dampener to prevent the gauge pointer from moving due to fuel slosh.  The floatless fuel sender has no side to side motion, which means it has no moving parts to wear out.  It is top mounted and utilizes the aftermarket standard SAE 5 hole mounting flange and comes complete with neoprene gasket and mounting hardware. Features: Stainless steel construction Ethanol resistant Viton gasket 240-33 Ohm range Fits tanks with a depth of 8" (200mm)  Insulated 1/4"" spade connectors Standard 5 hole mounting flange Works with most standard marine fuel gauges Ground - Floating Connection - Insulated .25" Spade  *Sold as an IndividualWARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Color: Silver Box Dimensions: 3"H x 3"W x 10"L WT: 0.6 lbs UPC: 754059064376

Read more less

Riptide RT80/T Saltwater Transom Mount - 24V-80lb-42"We've Got Your BackSteering ControlTilt/Extend Tiller: Tilts (up to 45x) and extends (up to 6") to give you maximum control. Speed ControlDigital Maximizer: provides up to five times longer run time on a single charge by drawing only as much power as you need, so they don't waste any energy. These motors are variable speed, so dial in your precise speed and let Digital Maximizer deliver the right amount of power, while conserving your battery - extending your time on the water. Push-To-Test Battery MeterThis convenient battery meter tells you how much battery life you have left - at the push of a button.PropellerWeedless Wedge 2: Push weeds away and take on the thick stuff without battery-draining chopping and hacking. Weedless WedgeT 2 features swept-back, flared blades for unrelenting, reliable prop performance. Saltwater AdvantageAdvanced Corrosion Protection: Riptide's premium-grade alloys are fortified by a multi-step cleaning process, tough-as-nails armor plating & a durable, saltwater-resistant powder coat paint. With layers of protection, the elements are truly protected. Fully Encapsulated Electronics: Marine-grade urethane fully encapsulates Riptide control boards to protect the electronic circuitry. All electrical connections are sealed with waterproof heat-shrink tubing to keep saltwater out.Sacrificial Anode: We use metals that are properly balanced & a composite shaft to ward off galvanic corrosion. So the only piece left for saltwater to attack is this little zinc anode, which absorbs corrosion so the rest of the motor doesn't have to. Advantage Minn KotaIndestructible Composite Shaft: Pound for pound, our composite shaft is stronger than steel. It flexes on impact and won't break, kink or corrode. That's why we're confident enough to guarantee it for life. If we could guarantee it for longer than a lifetime, we would. Cool, Quiet, Power:Nothing runs cooler or more quietly than a Minn Kota. Our extra large windings and commutators dissipate heat, resulting in cooler operation, extended battery power, and longer motor life. And our unique bearing system reduces friction to cut fish-spooking noise. So quiet, they'll never hear you coming. 2-Year WarrantyThis motor is backed up with Minn Kota's two-year warranty.Specifications Control: Tilt/Extend Tiller Volts: 24 Max Thrust: 80 lbs. Shaft Length: 42" Speed Control: Variable Max. Amp Draw: 56 Prop: Weedless Wedge 2 (MKP-33) WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Voltage - Input Range (Volts): 24v Built-In Transducer: No Thrust (Pounds): 80 lbs Shaft Length (Inches): 42" Salt Water/Fresh Water: Salt Mounting Style: Transom Control Type: Tilt/Extend Tiller Autopilot: No Included Propeller: MKP-33 Series: Riptide Box Dimensions: 9"H x 21"W x 60"L WT: 32.6 lbs UPC: 029402041923 Owner's Manual (pdf)

Read more less

Handle Telescoping - 5-9' with Boat HookEasily get to those hard-to-reach areas on your RV, boat, home, and more with Camco's adjustable-length multi-purpose handles. They feature an ergonomic teardrop design for comfortable use. Anodized aluminum construction resists rusting, and the TPE hand grip gives you a secure and comfortable grip. Patented.Features: Adjustable 5-9 ft. length Ergonomic tear-drop design Easily wash higher areas on your RV, boat, home, etc. Anodized aluminum construction TPE hand grip

Read more less

Spring-Lock™ Replacement End CapReplacement Spring-Lock™ end cap for securing the locking latch in the post.

Read more less

4" Elite Fixed-Height Pedestal - 30"4″ Pedestal of .213″ thick aluminum with 12″ round base, polished finish. The pedestal is sized and pressed into base then rim welded for stability. Use with any 4″ Mariner II or Workhorse slide or swivel (sold separately).

Read more less

Single Stage Regulator with 300 PSI Gauge & 20" Pigtail with Wall MountA single-port, single-stage, remote-mounted regulator. It comes complete with a pressure gauge, mounting brackets, and a 20" POL pigtail hose.Specifications: Die-cast zinc body 3/8" FPT outlet 20" POL pigtail hose included Dimensions: 6 1/2" H x 3 1/4" W x 3 1/4" D UL-listed

Read more less

20' High-Pressure Supply Hose with 3/8" Female Swivel Flare Fitting on Each EndEasy to install and won't corrode or develop stress/fatigue cracks. This UL-listed hose is fully assembled and leak tested with solid brass fittings (3/8" female swivel flare each end), and high-pressure LPG hose.

Read more less

High Performance Waterproof Grease - 14oz Cartridge - Non-Hazmat, Non-Flammable & Non-Toxic *Case of 10*Corrosion Block Grease is designed to provide maximum protection under severe conditions. Its formulation provides both high and low temperature performance, increasing the service life of critical components. Corrosion Block Grease strongly resists water wash out and provides superior protection against rust and corrosion.Corrosion Block Grease out performs lithium and most synthetic greases and meets or exceeds requirements for NLGI Service Classification GC-LB (automotive wheel bearing and chassis lubricants), which is based on ASTM D4950 performance requirements.Applications: All Industries: Wheel Bearings, Chassis, Winches, Windlasses, Wiring HarnessesFeatures: Waterproof Multi grease compatible Excellent thermal / oxidative stability Resists bleeding or melting at high temperatures Suitable for sealed for life applications Use in electrical applications that require grease Workplace safe & environmentally friendly Out performs competitive grease 5:1 Specifications: Type: Grease Box Dimensions: 3"H x 3"W x 10"L WT: 10 lbs

Read more less

High Performance Waterproof Grease - 14oz Cartridge - Non-Hazmat, Non-Flammable & Non-ToxicCorrosion Block Grease is designed to provide maximum protection under severe conditions. Its formulation provides both high and low temperature performance, increasing the service life of critical components. Corrosion Block Grease strongly resists water wash out and provides superior protection against rust and corrosion.Corrosion Block Grease out performs lithium and most synthetic greases and meets or exceeds requirements for NLGI Service Classification GC-LB (automotive wheel bearing and chassis lubricants), which is based on ASTM D4950 performance requirements.Applications: All Industries: Wheel Bearings, Chassis, Winches, Windlasses, Wiring HarnessesFeatures: Waterproof Multi grease compatible Excellent thermal / oxidative stability Resists bleeding or melting at high temperatures Suitable for sealed for life applications Use in electrical applications that require grease Workplace safe & environmentally friendly Out performs competitive grease 5:1 Specifications: Type: Grease Box Dimensions: 3"H x 3"W x 10"L WT: 1 lbs UPC: 770153250149 Brochure (pdf)

Read more less

High Performance Waterproof Grease - 2oz Tube - Non-Hazmat, Non-Flammable & Non-Toxic *Case of 24*Corrosion Block Grease is designed to provide maximum protection under severe conditions. Its formulation provides both high and low temperature performance, increasing the service life of critical components. Corrosion Block Grease strongly resists water wash out and provides superior protection against rust and corrosion.Corrosion Block Grease out performs lithium and most synthetic greases and meets or exceeds requirements for NLGI Service Classification GC-LB (automotive wheel bearing and chassis lubricants), which is based on ASTM D4950 performance requirements.Applications: All Industries: Wheel Bearings, Chassis, Winches, Windlasses, Wiring HarnessesFeatures: Waterproof Multi grease compatible Excellent thermal / oxidative stability Resists bleeding or melting at high temperatures Suitable for sealed for life applications Use in electrical applications that require grease Workplace safe & environmentally friendly Out performs competitive grease 5:1 Specifications: Type: Grease Box Dimensions: 2"H x 2"W x 8"L WT: 4.8 lbs

Read more less

ScuffBuster™ Standard with Notch - 5.75" x 4.5" - Notched Bowguard - 22G - Stainless SteelProtect Your Boat from Trailer Rollers - Enhance Your Boat's Appearance & Prevent Unsightly MarringThe Megaware ScuffBuster™ protects your boat from unsightly marring. Made from anti-corrosive, 22-gauge 304 stainless steel, Megaware ScuffBuster™ products attach to your boat’s surface with the highest quality materials and 3M® pressure-sensitive adhesives.WarrantyMegaware guarantees your Megaware ScuffBuster™ for a period of one year from the date of purchase. Please retain receipt for proof of purchase date.Features: Protect Your Boat's Gelcoat Minimize Roller and Trailer Scuffs Bend to Conform to Hull Mirror Polished Finish Specifications: Color: Stainless Box Dimensions: 1"H x 6"W x 8"L WT: 0.25 lbs UPC: 672057026380 Brochure (pdf)

Read more less

LifeSeal® Sealant Cartridge - CameoA unique combination of marine silicone and polyurethane, formulated especially for fiberglass. LifeSeal® offers a fast-curing, low odor, high adhesion, non-sagging, non-corrosive, non-yellowing formula. It provides a durable permanent watertight seal for joints subject to structural movement. May be used above and below the waterline. Use for sealing decks to hulls, thru-hull fittings, vinyl ports, sealing/glazing windshields and bedding marine hardware. Will adhere to metal, glass, wood, Lexan®, ABS® and certain other materials. Can be removed without damaging gel-coat. Not recommended for ferro cement hulls, impregnated wood or oil-soaked materials. Cures in presence of water. Mildew resistant and acid free.

Read more less

High Performance Waterproof Grease - 2oz Tube - Non-Hazmat, Non-Flammable & Non-ToxicCorrosion Block Grease is designed to provide maximum protection under severe conditions. Its formulation provides both high and low temperature performance, increasing the service life of critical components. Corrosion Block Grease strongly resists water wash out and provides superior protection against rust and corrosion.Corrosion Block Grease out performs lithium and most synthetic greases and meets or exceeds requirements for NLGI Service Classification GC-LB (automotive wheel bearing and chassis lubricants), which is based on ASTM D4950 performance requirements.Applications: All Industries: Wheel Bearings, Chassis, Winches, Windlasses, Wiring HarnessesFeatures: Waterproof Multi grease compatible Excellent thermal / oxidative stability Resists bleeding or melting at high temperatures Suitable for sealed for life applications Use in electrical applications that require grease Workplace safe & environmentally friendly Out performs competitive grease 5:1 Specifications: Type: Grease Box Dimensions: 2"H x 2"W x 8"L WT: 0.2 lbs UPC: 770153250026 Brochure (pdf)

Read more less

KeelGuard® - 10' - Light GrayThe Original Do-It-Yourself Keel Protector - Protect Your Investment Against Sand, Rocks & RampsWear and damage to your boat’s keel can break down its protective gelcoat finish, allowing water to reach and destroy the fiberglass laminates. Megaware KeelGuard®, the powerful abrasion-resistant protector, prolongs the life of your boat like nothing else.Megaware KeelGuard® EngineeringEvery aspect of the Megaware KeelGuard® has been designed with boat designers and 3M® engineers. Many factors contribute to its success. A precise, abrasive-resistant blend of polymers and urethanes achieve optimal durability and pliability. A pressure-sensitive adhesive creates strength, while permanently bonding and sealing Megaware KeelGuard®’s contoured edges to the hull surface. Angled grooves produce hydrodynamic channels, creating air pockets and providing a slicker surface. The perfect combination of these factors makes the Megaware KeelGuard® the easiest keel protector to install, and gives it unparalleled quality and dependability.Megaware KeelGuard® Colors & SizesMegaware KeelGuard® comes in 11 great looking colors to match virtually any boat. All colors are UV-stabilized for true color that lasts a lifetime. Megaware KeelGuard® is available in nine standard lengths or can be ordered in custom lengths.Lifetime WarrantyMegaware guarantees this Megaware KeelGuard® (to the original purchaser), against abrasive wear and adhesion failure during normal use of your boat, for as long as you own your boat.Features: Color: Light Gray KeelGuard® Size: 10' Boat Size up to 26' 3M® Technology 3M® Acrylic Pressure-Sensitive Adhesive Pliable & Tough Research & Technology Contoured Edge Protect Against Abrasive Sand, Rocks, Concrete Ramps and Oyster Beds Eliminate Costly Repairs Enjoy the Highest Quality and Superior Engineering Increase the Value of Your Boat 5” Width: Contact for Custom Sizes Made in the USA Specifications: Length: 10' Color: Grey Boat Length - Max (Feet): 26' Box Dimensions: 6"H x 9"W x 13"L WT: 6.7 lbs UPC: 672057206102 Brochure (pdf)

Read more less

KeelGuard® - 8' - SandThe Original Do-It-Yourself Keel Protector - Protect Your Investment Against Sand, Rocks & RampsWear and damage to your boat’s keel can break down its protective gelcoat finish, allowing water to reach and destroy the fiberglass laminates. Megaware KeelGuard®, the powerful abrasion-resistant protector, prolongs the life of your boat like nothing else.Megaware KeelGuard® EngineeringEvery aspect of the Megaware KeelGuard® has been designed with boat designers and 3M® engineers. Many factors contribute to its success. A precise, abrasive-resistant blend of polymers and urethanes achieve optimal durability and pliability. A pressure-sensitive adhesive creates strength, while permanently bonding and sealing Megaware KeelGuard®’s contoured edges to the hull surface. Angled grooves produce hydrodynamic channels, creating air pockets and providing a slicker surface. The perfect combination of these factors makes the Megaware KeelGuard® the easiest keel protector to install, and gives it unparalleled quality and dependability.Megaware KeelGuard® Colors & SizesMegaware KeelGuard® comes in 11 great looking colors to match virtually any boat. All colors are UV-stabilized for true color that lasts a lifetime. Megaware KeelGuard® is available in nine standard lengths or can be ordered in custom lengths.Lifetime WarrantyMegaware guarantees this Megaware KeelGuard® (to the original purchaser), against abrasive wear and adhesion failure during normal use of your boat, for as long as you own your boat.Features: Color: Sand KeelGuard® Size: 8' Boat Size up to 22' 3M® Technology 3M® Acrylic Pressure-Sensitive Adhesive Pliable & Tough Research & Technology Contoured Edge Protect Against Abrasive Sand, Rocks, Concrete Ramps and Oyster Beds Eliminate Costly Repairs Enjoy the Highest Quality and Superior Engineering Increase the Value of Your Boat 5” Width: Contact for Custom Sizes Made in the USA Specifications: Length: 8' Color: Sand Boat Length - Max (Feet): 22' Box Dimensions: 6"H x 8"W x 8"L WT: 4.5 lbs UPC: 672057204085 Brochure (pdf)

Read more less