Sonic Mini Compact Horn - White These Sonic Mini Compact Horns feature ASA plastic covers for impact and UV resistance. Mounting bracket can be used as a wiring template. Horn wiring has no polarity, so the negative or positive wire can be attached to either side. When installed, horns should point slightly downward to permit water drainage. At 108 decibels and a frequency (Hz) of 440±20A, this horn meets US Coast Guard's COLREGS and ABYC standard A-23 for use on vessels under 12m (39'). 12VDC. 12VDC.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Voltage - Input Range (Volts): 12v Color: White Box Dimensions: 3"H x 7"W x 9"L WT: 0.8 lbs UPC: 035514431859

Read more less

SingleViu 52mm (2-1/16") Fuel Level Gauge - Euro - 3-180 OhmSingleViu instruments represent the latest technology in instruments, and offer a top of the line solution by being able to work directly with traditional analog senders or work directly off a J1939 CAN network. Each SingleViu gauge has it's own microprocessor, which allows it to have a dual-input capability that can be switched from it's default analog input to J1939 CAN via the SingleViu Configuration software . Each speedometer or tachometer can also the display the J1939 system fault codes. These features, along with waterproof and fog proof construction, RGB LED illumination and advanced stepper motors make SingleViu the ideal solution when traditional gauges are needed or desired.*3 - 180 Ohm Sender RequiredFeatures: 0-180 Ω Default Input  RGB LED Illumination (default illumination set to White)  Water Resistant Front & Rear  Includes Wire Harness Voltage 12-24V Molex MX 150 8 Pin Connector Spin-Lok™ Mounting Hardware Analog Input ∗Sold as an Individual WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Gauge Size: 52mm Box Set: No Voltage - Input Range (Volts): 12-24V Series: SingleViu Gauge Type: Fuel Level Box Dimensions: 4"H x 5"W x 6"L WT: 0.3 lbs UPC: 4103590682963 Owner's Manual (pdf)

Read more less

Pressure Sender 80 PSI 1/4-18 NPT Features: Ground - Standard Connection - Knurled Nut Voltage - 6-24V Thread - 1/8-27 NPTF Max. Pressure Range - 80 PSI / 5 bar (10-180Ohm) *Sold as an IndividualWARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Color: Silver Box Dimensions: 2"H x 2"W x 5"L WT: 0.25 lbs UPC: 754059004679

Read more less

Type E Wedge Based Bulb - 12V - 4 PackFeatures: Voltage: 12V Watts: 3.4W Color - White * Sold as a 4-PackWARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Color: White Box Dimensions: 1"H x 5"W x 8"L WT: 0.1 lbs UPC: 754059005867

Read more less

Type A - White Metal Base Bulb - 12V - 4-PackFeatures: Voltage - 12V Watts - 2W Size - 9/32" (7mm) Color - White/Clear *Sold as a 4 PackWARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Color: White Box Dimensions: 1"H x 5"W x 8"L WT: 0.1 lbs UPC: 754059005775

Read more less

Food Grade Silicone - 11ozSuper Lube® Silicone Lubricant is specially formulated to meet the requirements of the automotive, industrial and agricultural industries. Super Lube® Silicone Lubricant is safe to use on rubber. Caution should be exercised when applying the spray to plastic or finished surfaces, as this product may negatively affect painted or lacquered finishes. The silicone base has high dielectric capabilities and protects well against rust and corrosion.Super Lube® Silicone Lubricant is an NSF registered Food Grade lubricant, rated H1 for incidental food contact and meets former USDA (H1) guidelines.Super Lube® Silicone Lubricant is Kosher Certified.

Read more less

Dual PowerTower® Strut - RadomeThe Modular Dual PowerTower® has been designed to allow your radome radar, Satcom and camera to be mounted together in one single space-saving modular installation. Specifications: Material: 6082 Aluminum extrusion Coating: Polyester powder Finish: Gloss white Specifications: Construction: Aluminum Type: Dual Mount Box Dimensions: 12"H x 22"W x 28"L WT: 15.2 lbs UPC: 5060114796317

Read more less

Pigtail Adapter, 30 Amp Locking To 50 Amp Locking121AProduct Features: Note: Pigtail adapters are equipped with covers and sealing collars (where indicated) and are for use in wet locations. MARINCO'S unique sealing collar system with cover joins the adapter to the cordset with a positive, mechanical connection WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Pigtail Adapter Box Dimensions: 4"H x 10"W x 12"L WT: 2.75 lbs UPC: 093344010507 Quick Guide (pdf)Brochure (pdf)

Read more less

Mast Mounts For 18" Garmin, KVH M3 & Raymarine 37STVCompatible Units: Garmin GMR18/GMR18HD/18Xhd/18HD+/Fantom18/GMR40 B&G / Lowrance /Simrad DX45/3G/4G / HALO20 / HALO20+ Intellian i3 KVH TracVision M2/M3 Raymarine 37STV /Quantum / Quantum 2 Sea Tel Coastal 14 Still the first choice for boat owners the world over, Scanstrut Mast Mounts are the ultimate solution for mounting radars on yachts masts.Raising the antenna clear of any obstructions or interference, the mast mount is a classic and reliable installation.Features Easy and quick to install with all fastenings supplied Attached to mast by four swivel feet matching the profile of any mast 12 point fixing using highest quality Monel rivets for a secure installation Nylon washers for all fastenings to protect paint finish Waterproof cable grommet included to seal cable entry into mast Materials Marine grade 6082 aluminum Polyester powder coated for a durable and gloss white finish Kit includes 1 x Mast Mount 4 x Swivel mounting feet 1 x Complete fastening pack Specifications: Construction: Powder Coated Aluminum Type: Mast Mount Box Dimensions: 5"H x 12"W x 20"L WT: 5.25 lbs UPC: 5060114790902 Quick Guide (pdf)

Read more less

True North Deluxe 9206 120VAC High-Performance Space Heater - 600W, 900W & 1500W600, 900, and 1500 watt electric space heater. Rugged, steel body construction. Dual overheat protection.This rugged AC electric heater keeps the cabin warm on the chilliest of those early and late season nights in the marina. The model 9206 True North AC heater was recognized by Powerboat Reports as being the best. There is no other heater on the market that delivers the performance and quality of the True North.Features: Steel construction 3 heat settings (600, 900, and 1500 Watt) Option of a 'fan only' setting Built-in thermostat Anti-freeze setting Low profile design Made in Canada 5-year warranty Benefits: Years of trouble-free use Extended boating season Greater on-board comfort Can use for 'no heat' air circulation Eliminate snow or frost build up on boat top Cannot tip over Easy to stow when not in use Owner's Manual (pdf)Brochure (pdf)

Read more less

Food Grade Anti-Seize with Syncolon® - 11oz *Case of 12Super Lube® Food Grade Anti-Seize Lubricant with Syncolon® is used to improve gasket performance and removal and prevents thread galling during installation. It is also used in thermal cycling, and dissimilar metal corrosion and it protects joints from corrosive environments.Super Lube® Food Grade Anti-Seize Lubricant with Syncolon® contains no heavy metals, is capable of handling temperatures to 475°F (246°C), and is environmentally friendly.Super Lube® Food Grade Anti-Seize Lubricant with Syncolon® is an NSF registered Food Grade lubricant, rated H1 for incidental food contact, and meets former USDA (H1) guidelines.Super Lube® Food Grade Anti-Seize Lubricant with Syncolon® is Kosher Certified.

Read more less

O-Ring Silicone Grease - 3oz Tube *Case of 12Using Super Lube® Silicone O-Ring Grease during installation helps protect an O-Ring from damage by abrasion, pinching, or cutting. It also helps to seat the O-Ring properly, speeds up assembly operations, and improves automated assembly.Lubricating the O-Ring with Super Lube® Silicone O-Ring Grease in dynamic and pneumatic applications extends the equipment’s service life.Super Lube® Silicone O-Ring Grease is compatible with the majority of rubber and plastic compounds. Super Lube® Silicone O-Ring Grease will help reduce the overall leak rate in vacuum applications by filling the spaces of the gland’s surfaces and lowering permeation rates of the elastomer.Super Lube® Silicone O-Ring Grease is an NSF registered Food Grade lubricant, rated H1 for incidental food contact and meets former USDA (H1) guidelines.Super Lube® Silicone O-Ring Grease is Kosher Certified.

Read more less

Multi-Purpose Synthetic Grease with Syncolon® - 3oz CartridgeSuper Lube® Grease is a patented synthetic NLGI Grade 2, heavy-duty, multi-purpose lubricant with Syncolon®. Synthetic base fluids and the addition of Syncolon® micro powders combine to form a premium lubricant that provides longer life protection against friction, wear, rust and corrosion over a temperature range of -45°F to 450°F (-43°C to 232°C). Machinery lasts longer, downtime is reduced and productivity is increased.Super Lube® Multi-Purpose Synthetic Grease is dielectric, food grade, clean and environmentally friendly. It offers good mechanical stability, does not evaporate or form gummy deposits. It will not melt or separate.Features: Super Lube® Multi-Purpose Synthetic Grease is an NSF registered Food Grade lubricant, rated H1 for incidental food contact and meets former USDA (H1) guidelines. Super Lube® Multi-Purpose Synthetic Grease is Kosher Certified. NGLI Grade 2 Grease is NLGI GC-LB Certified. Available in NLGI Grades: 1, 0, 00, 000. Part numbers are identified by /1, /0, /00, /000. Available with UV additive for traceability – validates the existence of the lubricant. Part numbers are identified by /UV. Specifications: Type: Grease Box Dimensions: 1"H x 1"W x 6"L WT: 0.2 lbs UPC: 082353210367

Read more less

Multi-Purpose Synthetic Grease with Syncolon® - 3oz TubeSuper Lube® Grease is a patented synthetic NLGI Grade 2, heavy-duty, multi-purpose lubricant with Syncolon®. Synthetic base fluids and the addition of Syncolon® micro powders combine to form a premium lubricant that provides longer life protection against friction, wear, rust and corrosion over a temperature range of -45°F to 450°F (-43°C to 232°C). Machinery lasts longer, downtime is reduced and productivity is increased.Super Lube® Multi-Purpose Synthetic Grease is dielectric, food grade, clean and environmentally friendly. It offers good mechanical stability, does not evaporate or form gummy deposits. It will not melt or separate.Features: Super Lube® Multi-Purpose Synthetic Grease is an NSF registered Food Grade lubricant, rated H1 for incidental food contact and meets former USDA (H1) guidelines. Super Lube® Multi-Purpose Synthetic Grease is Kosher Certified. NGLI Grade 2 Grease is NLGI GC-LB Certified. Available in NLGI Grades: 1, 0, 00, 000. Part numbers are identified by /1, /0, /00, /000. Available with UV additive for traceability – validates the existence of the lubricant. Part numbers are identified by /UV. Specifications: Type: Grease Box Dimensions: 2"H x 2"W x 7"L WT: 0.25 lbs UPC: 082353210305

Read more less

O-Ring Silicone Grease - 3oz TubeUsing Super Lube® Silicone O-Ring Grease during installation helps protect an O-Ring from damage by abrasion, pinching, or cutting. It also helps to seat the O-Ring properly, speeds up assembly operations, and improves automated assembly.Lubricating the O-Ring with Super Lube® Silicone O-Ring Grease in dynamic and pneumatic applications extends the equipment’s service life.Super Lube® Silicone O-Ring Grease is compatible with the majority of rubber and plastic compounds. Super Lube® Silicone O-Ring Grease will help reduce the overall leak rate in vacuum applications by filling the spaces of the gland’s surfaces and lowering permeation rates of the elastomer.Super Lube® Silicone O-Ring Grease is an NSF registered Food Grade lubricant, rated H1 for incidental food contact and meets former USDA (H1) guidelines.Super Lube® Silicone O-Ring Grease is Kosher Certified.

Read more less

Anti-Corrosion & Connector Gel - 3oz TubeSuper Lube® Anti-Corrosion and Connector Gel is a specially formulated high molecular weight connector gel used as a dielectric compound and as a corrosion inhibitor. It is an effective dielectric compound and corrosion inhibitor for plugs and connectors, electrical terminals, electrical fittings, spark plugs and coil connectors. It is a superior oxidation barrier and reduces fretting wear.Super Lube® Anti-Corrosion and Connector Gel is Kosher Certified.Note: Should not be used as a lubricant.

Read more less

Precision Oiler Multi-Purpose Synthetic Oil - 7mlSuper Lube® Synthetic Oils are specially blended to answer the needs of industrial equipment, machinery and tool applications that are better served with lighter, pourable oils of various viscosities. Super Lube® Oils are high quality, synthetic lubricants, blended in weights from ultra-light to heavy mixtures. These oils are dielectric, food grade, and clean. Features: Super Lube® Synthetic Oils have high flash and fire points, they also have low volatility and pour points. These oils are enhanced with anti-corrosive properties and will not form harmful abrasive deposits while in use. Super Lube® Synthetic Oils exhibit excellent thermal stability and resistance to oxidation. Most Super Lube® Synthetic Oils are NSF registered Food Grade lubricants, rated H1 for incidental food contact. An NSF H3 rated Oil is also offered for direct food contact. These products meet the former USDA guidelines. Super Lube® Synthetic Oils are environmentally friendly. These products contain essentially no VOCs (Volatile Organic Compounds) and are biodegradable. Super Lube® Synthetic Oils are Kosher Certified.

Read more less

Replacement Propeller for D140 Bow Thruster - Right SideThis is a right-side replacement propeller for Quick’s BTQ 140-40 and BTQ 140-30 Bow Thruster.Features:5 propeller blade*Please note that an anode is not included.

Read more less

Boat Cover Reinforcement/Repair KitKit includes one square yard of self adhesive material. Use it to add extra padding to stress points from windshields, trolling motors, etc. or to patch wear areas and tears that may develop over time. Simply cut to desired size and apply to clean, dry surface. Specifications: Type: Parts Box Dimensions: 2"H x 8"W x 11"L WT: 0.8 lbs UPC: 813095022570

Read more less

Prop & Nut Kits "A" (MKP-9) Easy-to-use kit that allows for fast removal/replacement of prop. Available in three different sizes to fit Minn Kota® prop dimensions (3/8", 1/2" and 5/16"). Includes prop nut and washer. Requires a crescent wrench for installation. WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Brochure (pdf)

Read more less

Entry Sensor for Siren 3Receive instant notifications if there is unauthorized entry on the boat. Perfect for securing lockers, doors, and hatches. Install the Wireless Module on one side of the door or locker and the Open/Close Magnet on the other side. Link to the Siren 3 Pro and receive alerts when the door or locker is opened or closed.Features: Compatible with Siren 3 Pro only Includes Wireless Sensor Module and Open/Close Magnet Owner's Manual (pdf)

Read more less

ATLAS™ 6" Set Back Hydraulic Jack Plate - Heavy Duty - BlackT-H Marine’s ATLAS™ Hydraulic Jack Plate is now available in a “HEAVY DUTY” upgrade.T-H Marine’s ATLAS™ Hydraulic Jack Plate is the #1 selling jack plate in the world and the #1 Choice by fishing professionals and boat manufacturers. With the new ATLAS™ HEAVY DUTY, the product is available for applications on even larger outboards, rated for engines up to 400 hp. 5 REASONS YOU SHOULD CHOOSE THE ATLAS™ HYDRAULIC JACK PLATE ATLAS™ is truly the best hydraulic jack plate in the world ATLAS™ is factory installed by more boat manufacturers than any other plate ATLAS™ is used by more professional fisherman than any other hydraulic jack plate ATLAS™ is the #1 selling hydraulic plate in the world – sold & serviced by more outlets ATLAS™ hydraulic actuator is made in the U.S.A. vs. our competitors being from China 6 WAYS THE ATLAS™ CHANGED HYDRAULIC JACK PLATES FOREVER ATLAS™ is made by T-H Marine/CMC, who were the FIRST to offer an actuator inside the jack plate – the competition copied ATLAS™ was the first plate to offer predrilling for shallow water anchors – the competition copied ATLAS™ was the first and only plate that did not require regular grease lubrication – the competition design cannot do that ATLAS™ was the first plate to include a heavy duty safety cable to protect boaters from engine entering cockpit upon failure ATLAS™ was the first plate to offer a very simple actuator replacement in the field ATLAS™ was the first major development in hydraulic jack plates in over a decade – spurring hydraulic jack plate improvement WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Kasper TrackerSolar-Powered Global Satellite Asset Tracker.Compact, solar-powered satellite tracker providing asset location, status, and global visibility in remote areas. Enables monitoring of equipment in harsh environments without built-in gear.Features: Solar-powered with an integrated antenna for autonomous operation. Two-way global satellite communication via OGx. Sensors: 3-axis accelerometer, temperature, and BLE door sensor. Monitoring: Utilization, dwell, door alerts for security. Durable: IP67/IPX9K rated, shock/vibration resistant, HERO-certified. Easy installation and relocation across assets. Wireless BLE 5.2 connectivity. Global Satellite Connectivity Remote Asset Monitoring from Any Device Easy Attachment & Relocation Exceptional Durability Geo-Fence Protection Mode Specifications: Dimensions:  8.8 x 3.0 x 1.1 in (224 x 76 x 28 mm) Material:  Polycarbonate, white Battery:  Li-ion, -30°C to 70°C operating, -40°C to 85°C storage Environmental:  IP67/IPX9K ingress, MIL-STD-810HG shock (40g), AAR-S-9401 vibration Positioning:  GPS, GLONASS, BeiDou, Galileo Certifications:  FCC/IC, CE RED, ATEX Zone 2, CID2, ROHS, WEEE, HERO Communication:  ORBCOMM OGx satellite, BLE 5.2 orbcomm.com Brochure (pdf)

Read more less

Lightspeed Light Foul-Release Coating Covers Approximately 4 Lights Underwater LightsMore Light. Less Fuss. Keep your lights shining bright all season long. Underwater lights are just as susceptible to marine fouling as any other underwater surface which can result in reduced visible light, and efforts to remove barnacles can result in damaged lighting components. Lightspeed is a transparent coating that is an easy and affordable way for boat owners to reduce maintenance, protect their investment, and maintain lighting system performance. Lightspeed has been shown to save three times its retail value in maintenance costs, on top of the unquantifiable damage to marine ecosystems caused by traditional antifouling products. Features: Lightspeed is a transparent coating that is an easy and affordable way for boat owners to reduce maintenance, protect their investment, and maintain lighting system performance Don’t risk damage to delicate components caused by scraping away hard marine growth Lightspeed also promises worry-free 12-24 months with reduced maintenance Lightspeed protects your aesthetic features, while not interfering with the light transmittance Endorsed and tested by Lumishore to ensure there is no drop in lumen output, no shift in color nor adverse effects on the lighting system performance Technical Specifications:Coverage Rate - 1ft² (four (4) average size underwater lights)In the Box: Lightclean wipe Application brush Lightspeed Clear Coat - 15ml *Sold as an Individual

Read more less

5" Vertical Camera Mount for SionyxGet the most out of your thermal camera or searchlight with a Seaview vertical mount. This mount will raise your camera 5.5" - 5.75" clearing anything that will obstruct the view of your camera. The 8" diameter base takes up very little space making it a great solution for installations where space is limited. Four pre-drilled holes allow for simple and easy installation.Extra SecurityNo visible bolts on the camera mounting plate provide extra security and improved aesthetics.Small Base Foot PrintThis mount is the perfect solution for installations where space is limited. Specifications: Height: 5" Type: Vertical Mount Box Dimensions: 7"H x 10"W x 10"L WT: 2.25 lbs UPC: 850047035189

Read more less

Flexi-Gel Water Blade - 12"Swobbit award winning water blades are made of high quality, medical grade silicone.  Perfect for a drying all types of surface types and surface sizes. No need for messy towels or chamois. Whether marine, auto, RV or aviation, our water blades make protecting your investment, a simple one. Features: Hand held - does not work with Quik Dry Adapter. T-Bar edge whisks away water in one pass Dries virtually any surface in 1/3 the time of messy towels, chamois or squeegees  15 times less friction than towels. Safe for all finishes including paint, fiberglass, windows and enclosures *Sold as an Individual  Specifications: Type: Tools & Accessories Box Dimensions: 1"H x 6"W x 13"L WT: 0.6 lbs UPC: 633590215143 Brochure (pdf)

Read more less

Horizontal Round Rail Mount with Knob - 1-1/2"Magma's horizontal round rail mount with the knob replacement part.Specifications: Mount: 1-1/2" Weight: 0.93lbs/0.43kg Exterior Construction Materials: 18-8 Stainless Steel and 356 Anodized Aluminum Warranty: 1 Year

Read more less

Piezo Igniter and Ceramic Electrode with Wire & Fasteners Replacement igniter and electrode.Compatible with: A10-207 A10-217 A10-918  A10-918L A10-918LS  A10-1218L  A10-1218LS A10-1225L  A10-1225LS  *Sold as an Individual 

Read more less

LifeSeal® Sealant Cartridge - BlackA unique combination of marine silicone and polyurethane, formulated especially for fiberglass. LifeSeal® offers a fast-curing, low odor, high adhesion, non-sagging, non-corrosive, non-yellowing formula. It provides a durable permanent watertight seal for joints subject to structural movement. May be used above and below the waterline. Use for sealing decks to hulls, thru-hull fittings, vinyl ports, sealing/glazing windshields and bedding marine hardware. Will adhere to metal, glass, wood, Lexan®, ABS® and certain other materials. Can be removed without damaging gel-coat. Not recommended for ferro cement hulls, impregnated wood or oil-soaked materials. Cures in presence of water. Mildew resistant and acid free.

Read more less

Gen 3 Standard Starlink Antenna Mount Top Plate - Fits Mounts Ending in M1 & M2The Seaview modular top plate ADAG3 for the Gen 3 Standard Starlink Antenna (and sometimes the Gen 4/Standard) is specifically engineered for the demanding marine environment. This top plate fits any Seaview modular pedestal mount ending in M1 or M2. The design incorporates a slight angle to the Starlink antenna to facilitate moisture runoff.The aluminum plate has a 3 part polyurethane prime and powder coat and the end pieces are made using machined marine-grade high-density polyethylene to ensure the best possible finish and corrosion resistance.This plate also has a waterproof grommet in the center for cable routing.The Gen 3 Standard Starlink Antenna (sometimes Gen 4/Standard) now features a convenient pressure-fit kickstand for placement on flat non-mobile surfaces. However, when mounting to a vehicle or other fast moving vessel, it necessitates additional support. Opting for the Seaview ADAG3 modular top plate is a superior choice, offering a very secure and easily assembled mounting solution.

Read more less

12.5" Dual Mount for Most Radar Domes - Top for Sat Domes - Top Plate RequiredInstall your satdome, camera or other marine electronics above your radar using a Seaview Dual Mount. Doing this ensures maximum performance out of your electronics and eliminates radar interference. The bottom mounting plate is pre-drilled to fit all closed dome radars, while the top mounting plate is modular and sold separately. Oval hollow mast section allows for easy cable management.Compact DesignSpecifically designed to not take up a large amount of space results in the perfect solution where space saving is a must.Eliminate InterferenceA Dual Mount gives your radar or satdome extra height clearance to tower above anything that could obstruct its view, while still maintaining a small footprint. This also allows for all electronic cables to pass through one hole for cleaner installation.UniversalThe lower platform is welded onto the main body of the mount. This platform comes pre-drilled for just about all open and closed dome radars. The above image shows a lower platform on a dual mount that’s for a closed dome radar. When selecting a Seaview dual mount be sure to check to make sure that the particular one you are looking at is for a closed dome radar or a open array radar. The dual mounts that are for an open array radar have an extended lower platform so that the antenna clears the main body of the mount.Modular Top PlateThe top platform is where you bolt the Top Plate to. Seaview developed the Top Plate to make product selection easier for the customer and to enhance the look of these mounts. Long gone are the days of top plates with a bunch of holes in them. *Top Plate Sold Separately* Specifications: Type: Dual Mount Height: 12.5" Box Dimensions: 14"H x 18"W x 36"L WT: 23 lbs UPC: 839662009027 Quick Guide (pdf)

Read more less

Random Orbital Polisher Bigfoot LHR21 Mark V (Tool Only)The RUPES BigFoot LHR21 Mark V polisher represents a real breakthrough in the professional polishing industry. This polisher features a 150 mm backing pad and a 21 mm orbit and stands out for a series of technical innovations aimed at improving performance and comfort, offering more precise and efficient polishing.Reduced vibration & silence with POLYSYNTHEC™ gearsA key innovation of the Mark V is the use of POLYSYNTHEC™ composite gears, which offer superior resistance to wear even in the most demanding working conditions. These gears are lighter than traditional metal gears and require less lubrication, thus improving the efficiency of the motor and reducing energy loss. The result is a drastic reduction in vibration and noise, improving comfort during prolonged use. The reduction in vibration is particularly important because it allows the operator to maintain a more stable grip, improving the precision of movements and the quality of the polishing. This also reduces fatigue during long work sessions, ensuring consistent and professional results. The 47% reduction in noise compared to previous models, however, makes the work environment quieter and more pleasant, protecting the operator’s hearing.PrecisionPro backing pads & low centre of gravity for optimal controlThe BigFoot Mark V polishers also introduce the new PrecisionPro backing pads, designed to ensure optimal balance when using different pads. These pads feature a protective rubber edge, which ensures greater safety when polishing delicate surfaces, reducing the risk of accidental damage. This allows the operator to work with greater confidence, even on sensitive surfaces such as edges or particularly delicate bodywork parts. Another notable innovation is the low centre of gravity of the Mark V polishers. Lowered by 13 mm compared to previous models, this allows unparalleled stability and superior control of the tool, especially in complex work situations. With a lower center of gravity, the operator can maneuver the polisher with greater precision, even when working on complex surfaces or intricate details.5-Year WarrantyRUPES doesn’t just offer advanced technological innovations, they demonstrate their confidence in the quality and durability of the Mark V polishers with an extended 5-year warranty. By registering their product immediately after purchase, customers can enjoy comprehensive support that covers any manufacturing defects, providing long-term protection for their investment. This extended warranty not only provides added peace of mind, it also underscores RUPES’ commitment to providing high-quality products that are designed to last. Specifications: Type: Tools & Accessories Box Dimensions: 6"H x 7"W x 22"L WT: 8.2 lbs UPC: 8059519688768 Brochure (pdf)

Read more less

1-1/4" Light Bar for Closed Dome Radar - Requires LTB TopSeaview light bars are made from aluminum and powder coated brilliant white and are compatible with Seaview Modular Mounts (polished S.S. light bars also available). These light bars are 1.25" in diameter. Different styles of light are available as well as numerous accessories for your light bar. Accessories such as LED anchor lights, GPS adapters, wind transducer adapters, etc. What's also unique with Seaview light bars is that many can fold over 90° to allow for extra height clearance. Many StylesThere are many different styles of Seaview light bars so you can be sure to get one that will work with your specific application. Styles for closed dome radars, satellite domes, open array radars and cameras/search lights.Extra Height ClearanceOn select Seaview light bar models some can fold over 90° to allow for extra height clearance. Simply loosen the four bolts around the stainless steel clamp and fold over in either direction.Easy InstallationSecured with a stainless steel clamp, simply use the supplied four bolts   Specifications: Type: Light/GPS Brackets Box Dimensions: 3"H x 13"W x 31"L WT: 3.5 lbs UPC: 839662009188 Quick Guide (pdf)

Read more less

Velcro Waffle Ultra-Fine Polishing Foam Pad for Rotary Polishers 180mm - WhiteThe WAFFLE ULTRA-FINE FOAM PAD is designed to remove fine imperfections and create an unbelievably high gloss finish. The waffle pad face, perfect against the stress caused by rotary motion, offers great stability when correcting paint defects or removing haze left by previous, heavier polishing phases. These pads are designed to work with the BigFoot LH19E and any other rotary polisher. We recommend pairing them with our UNO Pure Compound.The waffle design of the pad surface generates a smooth polishing experience and increases user comfort. Since the waffle-shaped face of these pads does not totally touch the surface, they work at a cooler level, reducing the risk of overheating the paint. Specifications: Type: Buffers & pads Box Dimensions: 1"H x 6"W x 6"L WT: 0.05 lbs UPC: 8059519685064 Quick Guide (pdf)

Read more less

Reveal Lite-Residue Remover - 750mlREVEAL LITE is a surface preparation and cleaning spray specifically formulated to remove compound and polish oils, residues, waxes, non-durable fillers, and other surface contamination remaining on surfaces before or after correction. It also works great as an exterior glass cleaner.Tips for Success: REVEAL LITE, spray generously onto the surface to be cleaned (if the surface is freshly painted, spray onto a towel, then wipe, do not spray directly on the surface). Wipe immediately with a clean, soft, microfiber polishing cloth until dry. Inspect surface and repeat treatment as necessary. Specifications: Type: All Purpose Box Dimensions: 3"H x 3"W x 8"L WT: 1.6 lbs UPC: 8059519685637 Quick Guide (pdf)

Read more less

Dual Battery Charger for iBrid HLR15 & HLR21 Batteries with LED IndicatorsThe 9.HC180LT Battery Charger is custom-designed to fit the iBrid Mini’s unique battery pack system. The charging station indicates charge status using integrated LED lights and provides a 100% charge from zero to full in approximately 35 minutes.*Batteries NOT Included Specifications: Type: Battery & Electrical Box Dimensions: 4"H x 8"W x 9"L WT: 2.6 lbs UPC: 850056581165

Read more less

D-A Precision Pro Polishing Backing Pads 150mm 6"These revolutionary backing pads have been meticulously designed to take your polishing experience to the next level.Without polyurethane, they not only bring durability to the forefront but also provide a lower center of gravity. This means enhanced stability during operation, allowing for greater control and precision in your work.The rubber edge adds an extra layer of finesse to your polishing tasks, ensuring that even the most delicate surfaces are treated with care. What truly sets our backing pads apart is their ability to guarantee better balancing, even with different polishing pads.This means you can effortlessly switch between various pads without compromising on performance or quality.LOWER CENTER OF GRAVITYFor superior stability and controlRUBBER BORDER PROTECTIONFor added surface protection and a smoother glideBALANCING VERSATILITYPerfect balance with various polishing pads Specifications: Type: Buffers & pads Box Dimensions: 1"H x 6"W x 6"L WT: 0.2 lbs

Read more less

Gen 3 Standard Starlink Antenna Mount with 8 Degree Wedge Base - WhiteThe Seaview SRM200WB8 Mount for the Gen 3 Standard Starlink Antenna (sometimes Gen 4 / Standard) that has been specifically designed for the harsh marine environment. If its good for the marine environment then its ideal for any other outdoor application (RVs, overland vehicle, vans, jeeps, side by side, UTV, trucks, etc.). The base aluminum plate has a 3 part polyurethane prime and powder coat and the end pieces are made using machined marine-grade high-density polyethylene to ensure the best possible finish and corrosion resistance.The Gen 3 Standard Starlink Antenna (sometimes Gen 4 / Standard) features a convenient pressure-fit kickstand for placement on flat non-mobile surfaces. However, for marine or vehicle mounting, it necessitates additional support. Opting for the Seaview SRM200WB8 mount is a superior choice, offering a reliable and adaptable mounting solution. Wedge Base Features: Designed to fit the Starlink Flat High-Performance Antenna and Seaview SRM200W Mount for the Gen 3 Standard Starlink Antenna.  Pre-drilled mounting holes allow the hardware to fasten directly to the wedge. Drilled and tapped for the CG30PW (white) or CG30PB (black) cable seal that comes with each Seaview wedge base. No need to cut the Starlink connectors for installation. Available in white or black

Read more less

Solve - 20oz Aerosol CanSEM Solve is a virgin solvent blend to clean panels before refinish or repair.Features: Effectively removes adhesive residue, wax, grease, road tar, oil, silicone, paint overspray, and bug remnants Easy to use Leaves no residue Applications: Bare metal Primed or painted surfaces SMC and plastic - limit exposure Properties: Available in gallon, aerosol, quart, or 5-gallon containers Clear Ready to use

Read more less

Hydraulic Hose Kit 6' - Two Hoses with Bulkhead FittingsTwo high-pressure flexible hoses with pre-crimped nickel-plated fittings, bulkhead fittings (for KIT OB-BHBR only), and bend restrictors on one end. Application:Recommended for use with all Uflex helms with 1500 psi relief valvesSpecification:Hose Length (feet): 6’  Specifications: Cable Length (Feet): 6' Box Dimensions: 5"H x 14"W x 15"L WT: 2.55 lbs UPC: 702755025054

Read more less

M90 Mach Black Rotary Steering Cable - 18'Uflex M90 Mach Rotary Steering Cable provides boat steering systems with increased flexibility and durability from top-quality materials and construction. M90 Mach cables use a patented design offering high efficiency and performance in mechanical steering systems.Features: Minimal feedback Fast connections for simple installation Ideal for long cable runs and tight bend applications - Minimum steering cable bend radius: 150 mm (5.9") Stainless steel cable output end featuring patented gasket (engine side) Specifications: Cable Length (Feet): 18' Box Dimensions: 3"H x 17"W x 28"L WT: 9.2 lbs UPC: 702755052067

Read more less

4MP HD-TVI Mini IR Turret with 2.9mm Lens - GreyMonitor your property with the miniature dark-gray aluminum 4MP Outdoor HD-TVI Mini-Turret Camera with Night Vision from Speco Technologies. Featuring a 4MP CMOS sensor and a 2.9mm fixed lens, this camera transmits video at resolutions up to 2560 x 1440 at 15 fps. The camera is equipped with IR LEDs for up to 35' of night vision, enabling you to capture video in even total darkness.Designed for outdoor use, the camera is housed in an IP66-rated weather-resistant enclosure. The UTC (Up-the-Coax) connection allows for OSD control of the camera.Features: Up to 2560 x 1440 resolution video at 15 fps over coax 12 built-in IR LEDs for up to 35' of night vision Signal distance up to 1600' Progressive scanning system Automatic gain control Automatic white balance Internal synchronization Runs on 12 VDC (power supply available separately) Vandal-resistant cast aluminum enclosure IP66 rated for outdoor use FCC and RoHS certified Miniature form factor, suitable for use in vehicles

Read more less

Mercury Verado 350 Zinc Anode KitSpecifications: Material: Zinc For Mercury Verado Specifications: Material: Zinc Box Dimensions: 2"H x 4"W x 4"L WT: 4.5 lbs UPC: 8058774839496

Read more less

12V Drop-In Low Profile Horn with Black & White GrillsMarinco is the leading supplier of horns to the marine industry, with over fifty years of experience in designing and manufacturing sound devices specifically for use in harsh marine environments. Stainless steel is used for all critical components such as trumpets, motor cover, diaphragms, assembly and mounting hardware. The latest addition is the "H" Horn Phase II, which is the loudest drop-in horn available today.Features: Comes with both white ASA and black ABS screw-in grills Grills have water resistant fabric liners Easy installation: 2.75" diameter hole x 1" deep 12 Volt, maximum amp draw: 4 Amps New louder dB(A) rating: 111 dB at one meter Fundamental frequency: 360 +/- 20Hz Mounts from the outside, grill screws on for easy install Easy retrofit Specifications: Voltage - Input Range (Volts): 12v Box Dimensions: 2"H x 7"W x 10"L WT: 0.7 lbs UPC: 035028100807

Read more less

Dual Speed Intermittent Wiper Motor ControllerSynchronized control of single or dual speed 12V/24V wiper systems, features intuitive automotive style functionality. Easy to use with included Contura switch, and easy to install with ¼" spade connectors. IP67 potted aluminium construction for harsh environment durability.WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Pressure Sender 80 PSI Features: Ground - Standard Connection - 10-32 Stud Voltage - 6-24V Thread - 1/8-27 NPTF Component Reference No. - AT84200 Max. Pressure Range - 80PSI / 5 bar (240-33Ohm) *Sold as an IndividualWARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Color: Silver Box Dimensions: 1"H x 5"W x 8"L WT: 0.3 lbs UPC: 754059005003

Read more less

TEC-DIVERS Plate AnodePlates for HullsMaterial: MagnesiumLength: 12.01"Width: 5.98"Height: 0.51"Weight: 2.76lbs Specifications: Material: Magnesium Box Dimensions: 1"H x 6"W x 12"L WT: 2.7 lbs UPC: 8059617816759 Quick Guide (pdf)Owner's Manual (pdf)

Read more less

Flush DrinkholderCut-Out: 3-7/8"Outer Diameter: 4-3/8"Depth: 2-1/4" - 3-1/8"Material: 304 Stainless Steel Includes mounting gasket, pad & 3/8" drain tube Fits cans, bottles & can coolers

Read more less