102 XD Actuator- 12 Volt- 4-1/2  Stroke with Mounting HardwareThe 102 XD Actuator is used with Trolling Tab systems sold after 2000 and OEM applications. 4.25 stroke. Overall length (tip to tip) is 13 inches. Instant response electric actuators are made of high impact glass fiber filled, ultraviolet-resistant nylon material with 316 super buff stainless steel tubing.Specifications: Newly implemented Anti Extrusion Ring (AXR) seal stabilization system. Stronger top cap and mounting clevis design Improved pressure-tight torx screws Integrated wiper seal at actuator base Molded-in brass thrust bearing design Thicker and stronger motor housing wall Improved O-Ring design for more consistent seal Over-molded cable providing a stronger tighter seal Upper mounting bracket with gland seal Features: Lenco's ballscrew design is more reliable and twice as powerful compared to typical hydraulics Lenco's tough, high-torque actuator motor easily pushes 500 pounds. Lenco Actuator connections use waterproof "Plug & Play" Deutsch connectors eliminating the possibility of water intrusion. 12 Volt 5/16" mounting hardware 6 foot cable WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Quick Guide (pdf)

Read more less

16" x 12" Heavy Duty Performance Trim Tab Kit w/o Switch Kit -12VLenco Electric Heavy Duty Polished Blade Trim Tab Kits are supplied with electric actuators for precise control. Fully submersible with all Plug & Play Deutsch connections. Blades are Electro-Polished 12 gauge - 304 SS with 1" turned up edges, 85 degree inside taper and 1/4" diameter hinge pin. Kits equipped with Extreme Duty actuators with 5/16" SS bolts. Kit is factory assembled with full transom back plate, mechanical strain relief cable seal, adjustable C-channel mounting brackets and 3.75" sacrificial anodes. .Kit Contents: 2 each of 12-gauge stainless steel Electro-Polished trim tab blades  2 each of #15055-001 XD extreme duty actuators with 6' lead and Deutsch plugs 2 each of #30133-103  20' actuator extension wiring harnesses 1 each of the Lenco owner’s / installation manual Boat-mounting hardware supplied by customer Specifications: Suggested Boat Length: 20' to 38' Length of Tab: 16" Width of Tab: 12" Minimum Transom Height: 10.5" Blades: 12 Gauge Stainless Steel Finish: Electro-Polished Switch Kit: Sold Separately Class: Fuel Efficient Compliance: CE Certified Compatibility: Any Boat Switch Required: 15069-001 or 15070-001 Actuators: 12-volt WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Brochure (pdf)

Read more less

Supa Pump 3.0 with Inline SwitchSuper Fast! Super lightweight, easy to use over the boat pump! Now with an in-line on-off switch! Bigger hose for faster fills! Compatible with all FatSac bags!The Supa also comes with a helically reinforced hose that prevents kinks. The hose has also been extended to 12 1/2’ to accommodate larger boats and deeper hulls. We have also lengthened the power cord to 15’ as boats continue to get longer. The plug has been upgraded to stainless steel to prevent the rust and corrosion we saw on previous models. It has custom-machined FatSac brand fittings, making it directly compatible with the cap and chain fitting on your FatSacs.Specifications: Lightest and fastest pump available from start to finish Even faster than our Supa Tsunami Fill bags in minutes Bigger hose for fast fills! 12.5’ long hose to accommodate deeper hulls and longer boats 15’ long power cord perfect for longer boats Stainless steel outlet adapter to prevent rust/corrosion Now with an in-line on-off switch Custom machined fittings to increase flow - compatible with the W730 fitting provided in all stock bags or available for purchase under 'FITTINGS' The pump is compatible with older FatSac bags

Read more less

Add-A-Snap - Black - 2-1/2" For use with canvas or nylon boat covers, the Add-A-Snap allows you to easily add length on hard to reach snaps from shrunken material. Nickel plated brass/nylon.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Aluminum Boat Hook - 8' - Two PieceSea-Dog Boat Hooks are constructed of high quality, durable, marine grade aluminum tubing with a threaded end attachment and comfort grip handle. Includes a four-point hook attachment coated in soft, over-molded rubber to protect your boat from scuffs and scratches. Its buoyant design keeps the boat hook afloat for more than 5 minutes. The bright orange rubber tip is highly visible and removes for accessory attachment. Fits all Sea-Dog Boat Hook accessories, as well as any competitor's accessories featuring universal/Acme threads.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Tools & Accessories Box Dimensions: 2"H x 4"W x 57"L WT: 1.5 lbs UPC: 035514491747

Read more less

Wally Plug with O-RingsFatSac Replacement Ballast Bag Plug is used to plug unused holes on FatSac ballast bags. Fits the proprietary thread pattern used on FatSac bags making a perfect water-tight seal that won't leak or back out over time.Off-the-shelf FatSac ballast bags include the required number of bag plug fittings, but if you're misplaced one or want to have extras, this is the fitting you need to close any unused holes on the bag.FatSac ballast fittings have been designed with you in mind.  All of the fittings make connecting pumps and hoses to your FatSac a quick and simple task. Features: Wally plug O-ring *Sold as an Individual WARNING: This product can expose you to chemicals including Diisononyl Phthalate (DINP) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov. Specifications: Type: Fittings & Hoses Box Dimensions: 1"H x 1"W x 1"L WT: 0.1 lbs UPC: 817177021376 Brochure (pdf)

Read more less

MKP-40 Power PropDesigned to deliver optimal power, torque, and efficiency. Designed to work exclusively with QUEST Series motors. Includes prop pin, nut, and washer.Features: Power Prop, made exclusively for QUEST Series motors, is designed for maximum torque and efficiency Designed to deliver optimal power, torque, and efficiency Fits 4-1/2" QUEST Series lower units For use with a 1" x  3/16" Prop/Drive Pin Prop nut thread 3/8" - 24

Read more less

Magnesium Anode for 12 and 20-Gallon Water HeaterRaritan's Magnesium Anode is made specifically for Raritan's 12 and 20-Gallon Water Heater.Features: 16-1/8" Stainless Steel Fitting WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Material: Magnesium Box Dimensions: 1"H x 1"W x 16"L WT: 0.75 lbs UPC: 085462001673

Read more less

NMEA 2000 Backbone Cable - 30M (98.4')Features: Length- 30M Color - Grey Connectors - NMEA 2000 Connection - 1 NMEA connection/1 end without connector for easier routing *Sold as an IndividualThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Color: Grey Box Dimensions: 6"H x 8"W x 10"L WT: 4.8 lbs UPC: 4047101381191

Read more less

Acrylic AdhesiveCAN NOT SHIP AIR,UPS GROUND ONLYAT-4020 is a specially formulated adhesive for holding all our parts with little or no sagging in vertical or overhead applications. Cures in 10 - 12 minutes and has working strength within 40 minutes. AT-4020 is recommended for composite and plastic bonding applications and not for bonding to metal substrates. Unlike other 2 part acrylic adhesives AT-4020 has a one year shelf life when stored at 72 degrees but is best refrigerated when ever possible. It is packaged in a 50ml cartridge and can be mixed by hand or by using our AT-300 gun and mixing tips. The 50ml cartridge will bond 150 - 200 parts. Brochure (pdf)

Read more less

Euro White 2" Oil Pressure Gauge (80 PSI)Perimeter-lighted White dial with bold Black graphics, Black aluminum bezel, contoured White pointer and flat glass lens. A pressure gauge operates by sending a low amperage current through the gauge's meter to ground via a sending unit with variable resistance. The resistance of the sending units increase or decrease with the changes in pressure, temperature, etc...As the sender's resistance varies, the amount of current allowed to flow through it to ground changes and the meter deflects, showing the change in pressure.2" - Hole size: 2.0625" (53mm)Specifications: Anti-scratch glass lens Perimeter-lighted White dial 12 VDC negative ground Can be adapted for 24 VDC systems Dual Scale - Metric and Imperial Factory P/N GP9596*Sold as an Individual**Gauge Cover not IncludedThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Gauge Type: Oil Pressure Series: Euro White Voltage - Input Range (Volts): 12/24 V Gauge Size: 2" Box Set: No Box Dimensions: 4"H x 4"W x 5"L WT: 0.3 lbs UPC: 759266129023 Quick Guide (pdf)

Read more less

Rope & HandleFor Minn Kota cable steer bow-mount motors, this replacement handle features an ergonomic soft-grip design and durable, abrasion-resistant 48" nylon rope.WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Tip Top Teak Wood Oil Sealer - Quart - *Case of 12*Tip Top Teak's Wood-Oil Sealer is designed to seal and product clean teak.Features: Easy to use Lasts Extra Long Restores and protects teak and other woods Adds luster and beauty to your deckFor over 30 years Tip Top Products has been producing quality products forthe care and protection of your marine craft.Our Tip Top Line has alwaysbeen known as the choice of yachtsmen and boaters around the world,andour Wood -Oil Sealer has been proven time and again to be the premium sealerin the world.We are continuing to strive toward giving our customers thehighest quality products at a fair price and are designed to be "Simply theBest" Specifications: Type: Teak Box Dimensions: 2"H x 5"W x 8"L WT: 18 lbs

Read more less

LinkUp - Intelligent Battery Sensor (IBS) Kit - 12VBatteries are essential for engine starting and operating onboard utilities.  With Veratron’s new Intelligent Battery Sensor (IBS), it’s simple to monitor their status and health in real-time.  The system works with any OceanLink, AcquaLink or NMEA 2000-networked display, and is compatible with the latest glass cockpit systems.The system includes a Veratron LinkUp Gateway Module that enables the Intelligent Battery Sensor to be connected to and compatible with the NMEA 2000 network.  Its internal galvanic isolation decouples the backbone power from the LinkUp power supply, per NMEA requirement.Veratron’s Intelligent Battery Sensor (IBS) measures vital battery parameters: voltage, current and temperature, as well as state of charge, health and function. This provides the essential information needed to plan energy usage aboard and be aware of potential problems.The IBS system monitors a single battery or full bank.  Multiple LinkUp kits can be used to provide data specific to house, starter and system-specific supplies.  It works with 12V starter, gel or AGM battery types.The IBS simply clamps onto the negative pole terminal.  Completely sealed, it has a watertight 3A inline fuse within the housing.  This connects to the NMEA 2000 backbone through the innovative LinkUp Gateway Module and enables Veratron’s numerous sensors to communicate with the network.Configuring a LinkUp gateway is simple using a mobile device and the companion Veratron app available from the App Store and Google Play.  Each module has a built-in passive wireless antenna. The parameters of the sensor are configured to type, instance and warning threshold on the mobile device and then tapped against the LinkUp device for instant data download.Alternatively, LinkUp devices can be configured via NMEA 2000 with the PC Configuration Tool. This method additionally allows for real-time reading of the analog signal. An LED on the device will illuminate, notifying the user that the LinkUp is being configured.*Includes sensor and Link Up Gateway.Features: NMEA 2000® certified Wireless configuration through companion mobile App Status LED Plug-and-Play installation and configuration Input Signal - LIN bus Nominal Voltage - 12V *Sold as an IndividualThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Gauge Size: N/A Gauge Type: Battery Condition Series: LinkUp Voltage - Input Range (Volts): 12v Box Set: No Box Dimensions: 4"H x 4"W x 16"L WT: 0.9 lbs UPC: 7640178729520 Owner's Manual (pdf)Brochure (pdf)

Read more less

ATLAS™ 8" Set Back Hydraulic Jack Plate - Heavy DutyT-H Marine’s ATLAS™ Hydraulic Jack Plate is now available in a “HEAVY DUTY” upgrade.T-H Marine’s ATLAS™ Hydraulic Jack Plate is the #1 selling jack plate in the world and the #1 Choice by fishing professionals and boat manufacturers. With the new ATLAS™ HEAVY DUTY, the product is available for applications on even larger outboards, rated for engines up to 400 hp. 5 REASONS YOU SHOULD CHOOSE THE ATLAS™ HYDRAULIC JACK PLATE ATLAS™ is truly the best hydraulic jack plate in the world ATLAS™ is factory installed by more boat manufacturers than any other plate ATLAS™ is used by more professional fisherman than any other hydraulic jack plate ATLAS™ is the #1 selling hydraulic plate in the world – sold & serviced by more outlets ATLAS™ hydraulic actuator is made in the U.S.A. vs. our competitors being from China 6 WAYS THE ATLAS™ CHANGED HYDRAULIC JACK PLATES FOREVER ATLAS™ is made by T-H Marine/CMC, who were the FIRST to offer an actuator inside the jack plate – the competition copied ATLAS™ was the first plate to offer predrilling for shallow water anchors – the competition copied ATLAS™ was the first and only plate that did not require regular grease lubrication – the competition design cannot do that ATLAS™ was the first plate to include a heavy duty safety cable to protect boaters from engine entering cockpit upon failure ATLAS™ was the first plate to offer a very simple actuator replacement in the field ATLAS™ was the first major development in hydraulic jack plates in over a decade – spurring hydraulic jack plate improvement WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

XKA Aluminum Alloy Trim Tab Kit with ALC-1 Control - 12 x 24The Lectrotab Aluminum Alloy trim tabs are uniquely designed to meet the needs of Aluminum hulled boats and are an economical option for all boats.  All Aluminum Alloy tabs are fabricated with an extremely strong "no-break" polypropylene hinge.  All Aluminum tabs are sealed with a corrosion resistant epoxy coating. Combined with a precision-engineered actuator, this kit is built to combine quiet operation with a non-hydraulic, maintenance free design.  The unit is corrosion free, ensures very accurate tab positioning, provides maximum lift force, and is totally self-contained for easy installation.  The actuator assembly is packaged in a non-metallic permanently sealed housing.  No components need to be installed inside the boat. Most importantly, unlike hydraulic trim tabs, there is no oil to leak out.  The actuator incorporates either a standard or low profile transom mounting bracket. The Automatic Leveling Control (ALC) will automatically adjust your trim tabs to maintain a level boat for a more comfortable and enjoyable ride. Additionally, the ALC automatically corrects the roll from side to side and pitch from fore to aft to enhance your boating experience and improve your fuel economy. Features: All Tabs sealed with a corrosive resistant epoxy coating Equivalent strength to 10 gauge stainless steel "No Break" polypropylene hinge tested over 300,000 cycles to a 90° bend without failure Upper ram seal location cannot be damaged due to fouled ram or barnacle growth Utilizes internal pressure equalization system Internal brake system prevents unwanted tab movement when under way or backing down Quiet operation Actuators are fully load tested to push 1000 lbs of force Non-metallic external structure which cannot corrode and will not deteriorate in the sun or under water Technical Specifications: Trim Tab Size (L x W) - 12" x 24" (30 x 61 cm) Boat Length - 28' to 48' (8.5 to 14.5 M) Trim Tab Material - Marine grade 6005-T5 Aluminum Alloy  Actuator DC Voltage - 12 V Actuator Stroke Length - 2.25" (57 mm) Actuator Cable Length  - 23' (7 M) Actuator Vertical Height - 11.875" (302 mm) Control Dimensions (W x H) - 3.15" x 3.07" (80 x 77 mm) Control Mounting Hole Cutout - 2" (50 mm) Control Operating Voltage - 12 or 24 V In the Box: One (1) Automatic Leveling Control Two (2) Aluminum Alloy tabs Two (2) actuators w/23' (7 M) cables Instruction Manual  *Sold as a KitThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Actuator Type: Electro-Mechanical Construction: Aluminum Alloy Box Dimensions: 2"H x 4"W x 6"L WT: 23.95 lbs Owner's Manual (pdf)Brochure (pdf)

Read more less

Trolling Motor Power ReceptacleUse this to add a 70A power receptacle to a Force® trolling motor.Compatible Devices: Force® Kraken trolling motor Force® trolling motor

Read more less

12 V Heavy Duty Tab Actuator - 6' Cable Lectrotab meets the needs of boats operating at high speeds or in rough conditions by offering its heavy duty trim tab actuator.  The heavy duty actuator features a reinforced upper mounting boss and a 12 gauge stainless steel upper bracket.  Lectrotab heavy duty trim tab actuators are precision-engineered to combine quiet operation with a non-hydraulic, maintenance free design. The unit is corrosion free, ensures very accurate tab positioning, provides maximum lift force, and is totally self-contained for easy installation.  The actuator assembly is packaged in a non-metallic permanently sealed housing. No components need to be installed inside the boat.  Most importantly, unlike hydraulic trim tabs, there is no oil to leak out.  The actuator incorporates a standard or low profile transom mounting bracket. Features: Stainless Steel upper mounting bracket Reinforced actuator upper mounting boss Upper ram seal location cannot be damaged due to fouled ram or barnacle growth Utilizes internal pressure equalization system Internal brake system prevents unwanted tab movement when under way or backing down Quiet operation All actuators fully load tested to push 1000 lbs of force Non-metallic external structure which cannot corrode and will not deteriorate in the sun or under water Technical Specifications: Actuator DC Voltage - 12 V Actuator Stroke Length - 2.25" (57 mm) Actuator Cable Length  - 6' (1.8 M) Actuator Vertical Height - 11.875" (302 mm) Upper Mounting Bracket - Stainless Steel - 12 gauge Lower Mounting Bracket - Standard *Sold as an IndividualThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Owner's Manual (pdf)Brochure (pdf)

Read more less

Actuator Upper Bracket Replacement upper bracket for the actuator. Attaches to standard actuator upper cover boss with the bolt. *Sold as an IndividualThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Brochure (pdf)

Read more less

MaxComplete Compound - 1 GallonMalco Marine MaxComplete next-generation cutting compound provides aggressive cutting action for heavy scratch removal and produces a gloss final finish.  This water-based, easy-to-cleanup, emulsion formula is designed to remove P600 and finer sand scratches and light-heavy oxidation on fiberglass, gel coat, and selected painted surfaces in marine and industrial applications.Features: Versatile Formula: Can be used on Gelcoat, fiberglass, painted surfaces, and industrial applications Water-based formula:   Environmentally friendly for use in Marinas, safe to use, easy clean-up Aggressive formula: Removes fine sand scratches and oxidation Specifications: Type: Restoration & Compounds Box Dimensions: 4"H x 7"W x 12"L WT: 10.8 lbs UPC: 075929730017 Quick Guide (pdf)

Read more less

Deck & Surface Spray All Purpose Cleaner - 1 GallonMalco Marine Deck and Surface All Purpose Cleaner is a powerful cleaner and degreaser, designed for flat and non-skid surfaces. This highly concentrated, non-caustic, and aluminum-safe cleaner removes dirt, grease stains, and streaks from fiberglass, metal, aluminum, wrapped, and painted surfaces.Features: Versatile formula: Cleans hulls and decks, non-skid and flat surfaces, fiberglass, metal, and painted surfaces Can be used on aluminum Highly concentrated; Dilutable: Clean heavy concentrations of dirt, bilge, grease, and oil at a 1:1 ratio; for general cleaning, dilute at a 1:3 ratio Can also be used at full strength through a trigger sprayer, as needed Phosphate-free and biodegradable: Environmentally friendly and can be used in marinas Specifications: Type: All Purpose Box Dimensions: 4"H x 7"W x 12"L WT: 9 lbs UPC: 075929760014 Quick Guide (pdf)

Read more less

HydroProtek Ceramic Spray - 16ozMalco Marine HydroProtek is a SiO2 Ceramic spray-on formula designed to shine, protect, and beautify your watercraft or recreational vehicle. HydroProtek is long-lasting, absorbs UV rays, adds gloss, and easily sheds water. HydroProtek should be used every few months. This formula is safe for all surfaces, including hull, windows, trailers, wheels, and trim. This ceramic spray will bond with gel coat and clear coat to create a durable, hydrophobic surface, prolonging the life and ease of cleaning for any watercraft. Features: Durability: Up to 6 months of protection Hydrophobic properties:  Ease of cleaning, water and dirt slide right off Safe on multiple surfaces: Eliminate redundant products, can be used on the hull, windows, trailers, wheels, and trim, leaving outstanding depth-of-gloss. Easy to apply: Spray-on formula simplifies application for experts and novices alike Specifications: Type: Ceramic Coating Box Dimensions: 3"H x 3"W x 10"L WT: 1.25 lbs UPC: 075929997687 Quick Guide (pdf)

Read more less

Gel Coat Compound - 1 GallonMalco Marine Gel Coat is the perfect compound for marine and industrial applications. Gel Coat Compound is VOC-compliant and a water-based product. This easy-to-use and easy-to-clean-up formula significantly reduces manufacturing and buffing time. It removes P1000 or finer sand scratches and medium to light oxidation. Gel Coat Compound quickly leaves a deep, high gloss finish without the use of waxes, silicones, or fillers.   Features: Fast cutting: Removes P1000 or finer sand scratches and medium to light oxidation on gel coat surfaces Increased productivity: Easy to use, quick cleanup, and leaves a high gloss finish Water-based formula: Environmentally friendly, easy to use Specifications: Type: Restoration & Compounds Box Dimensions: 4"H x 7"W x 12"L WT: 10.9 lbs UPC: 075929998271 Quick Guide (pdf)

Read more less

MaxFinishing Polish - 1 GallonMalco Marine MaxFinishing Polish is an advanced all-in-one polish and swirl remover. It can be used on gel coat, fiberglass, and select painted surfaces. MaxFinishing Polish creates a rich, deep gloss and swirl-free finish in a single step after compounding.Features: All-in-one polish: Leaves a rich, deep gloss and a swirl-free finish. Versatile Formula: Can be used on gel coat, fiberglass, and painted surfaces Water-based formula: Environmentally friendly for use in Marinas, safe to use, easy clean-up Specifications: Type: Waxes & Polishes Box Dimensions: 4"H x 7"W x 12"L WT: 9.1 lbs UPC: 075929735012 Quick Guide (pdf)

Read more less

Deck & Surface Spray All Purpose Cleaner - 16ozMalco Marine Deck and Surface All Purpose Cleaner is a powerful cleaner and degreaser, designed for flat and non-skid surfaces. This highly concentrated, non-caustic, and aluminum-safe cleaner removes dirt, grease stains, and streaks from fiberglass, metal, aluminum, wrapped, and painted surfaces.Features: Versatile formula: Cleans hulls and decks, non-skid and flat surfaces, fiberglass, metal, and painted surfaces Can be used on aluminum Highly concentrated; Dilutable: Clean heavy concentrations of dirt, bilge, grease, and oil at a 1:1 ratio; for general cleaning, dilute at a 1:3 ratio Can also be used at full strength through a trigger sprayer, as needed Phosphate-free and biodegradable: Environmentally friendly and can be used in marinas Specifications: Type: All Purpose Box Dimensions: 3"H x 3"W x 10"L WT: 1.25 lbs UPC: 075929997663 Quick Guide (pdf)

Read more less

HydroProtek Ceramic Spray - 1 GallonMalco Marine HydroProtek is a SiO2 Ceramic spray-on formula designed to shine, protect, and beautify your watercraft or recreational vehicle. HydroProtek is long-lasting, absorbs UV rays, adds gloss, and easily sheds water. HydroProtek should be used every few months. This formula is safe for all surfaces, including hull, windows, trailers, wheels, and trim. This ceramic spray will bond with gel coat and clear coat to create a durable, hydrophobic surface, prolonging the life and ease of cleaning for any watercraft. Features: Durability: Up to 6 months of protection Hydrophobic properties: Ease of cleaning, water and dirt slide right off Safe on multiple surfaces: Eliminate redundant products, can be used on the hull, windows, trailers, wheels, and trim, leaving outstanding depth-of-gloss. Easy to apply: Spray-on formula simplifies application for experts and novices alike Specifications: Type: Ceramic Coating Box Dimensions: 4"H x 7"W x 12"L WT: 8.75 lbs UPC: 075929999261 Quick Guide (pdf)

Read more less

HydroFoam Ultra Concentrated Boat Wash - 1 GallonMalco Marine HydroFoam Ultra Concentrated Boat Wash creates thick, rich suds to remove algae, grime, oil, fish blood, salt, and dirt from fiberglass, gelcoat, metal, and painted marine surfaces. This phosphate-free, biodegradable formula cleans without stripping waxes, rinses easily, and leaves no residue.Features: Versatile use formula: Ideal for fiberglass, gel coat, and painted surfaces, sea deck, glass, teak, and other surfaces Phosphate-free, biodegradable formula: Environmentally friendly formula can be used in marinas Highly concentrated formula, 1:128 dilution ratio: High sudsing formula penetrates to remove dirt, grease, and grime, while leaving a clean surface Specifications: Type: Washes Box Dimensions: 4"H x 7"W x 12"L WT: 9 lbs UPC: 075929997717 Quick Guide (pdf)

Read more less

ATLAS FingerFlex Blinker Trim Control for Hydraulic Helms - Dual Control SwitchUPDATED DESIGN: FingerFlex "Blinker Style" Steering Wheel Trim SwitchT-H Marine offers the answer to convenient trim control for hydraulic helms - FingerFlex. Simple and easy to install, this unit can be added to any boat with only a moderate amount of difficulty.FingerFlex incorporates "Positive Clicking" technology that provides a positive touch and feel so, unlike similar systems, you know when your trim is operating and that's important when you really need it!FingerFlex can be installed on the right or left side of the bezel or both for dual controls. It can also be used to control hydraulic jack plates in addition to tilt and trim systems. Versions are also available to fit most mechanical steering systems.Features: The Ultimate in Trim Control for Hydraulic Helms Positive clicking technology for positive touch Operates engine trim and/or jack plates Fits hydraulic, cable, and tilt steering Easy installation Specifications: "Blinker" style switches allow quick and easy trim control Available in single or dual configurations

Read more less

12x12 Hydraulic Trim Tab System with One Box IndicationHydraulic trim tabs are known for power, precision, and durability. Get the most from your boat, no matter what the load, speed, or sea conditions. Using the helm control, you can adjust the tabs individually or in unison to create the perfect cruising attitude. Increase speed and fuel economy, smooth a rough ride, and get on plane faster.Features: Get on plane fast, and stay on plane at intermediate speeds Correct listing and uneven loads Improve visibility and safety Reduce pounding and eliminate porpoising Low maintenance, long-term value, and ease of service Exclusive transom mount interlocking tab design Sport batwing option (M80/ M120) provides 30% more lift for limited-space installations Bottom and piano hinge mounts are available for custom order Kit Includes: (2) Trim plane assemblies (2-4) Hydraulic actuators (A1101A) (1) Hydraulic power unit (V351HPU1) Hydraulic tubing and hardware One box indicator helm control WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

High Water Sensor for Siren 3The Wireless High-Water Sensor detects if there is water in the bilge and sends an alert to the Siren Marine App if water has risen above the preset level. Mount the Water Probe at the desired height in the bilge and plug the other end into the Wireless Module. Link the module to the Siren 3 Pro and receive alerts if the boat is taking on water.Features: Compatible with Siren 3 Pro only Includes Wireless Sensor Module and Water Probe with 3 feet of wire Owner's Manual (pdf)

Read more less

HOT FOOT™ Pro - Top Load Foot Throttle for OMC MercuryHOT FOOT™ Pro is the ultimate upgrade for the boater looking for safety and performance features that made Hot Foot™ the foot throttle boaters demand. HOT FOOT™ Pro sports a rugged aluminum finish with great color graphics on the pedal to accent any high performance boat. The top loading feature for the throttle cable* makes HOT FOOT™ Pro easier to install and gives more foot and leg room. Standard features include a patented idle stop for the Ficht and Optimax engines, stainless steel return spring, Teflon bushings on all critical pivot points and tow clip for added security.Features: Drive your boat like you drive your car Improved Safety & Throttle Control Attractive Full Color Pedal Graphics Topside Cable Connections Patented Idle Stop for FICHT & Optimax Stainless Steel Hardware with Teflon Bushings *Requires Longer Throttle Cable (Not Included)Optional Slide Mount (HFM-1-DP) available for comfort and multiple drivers.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Solenoid Valve - Green - 24VReplacement Solenoid Valve for use with Bennett's Hydraulic Power UnitSolenoid valves direct the flow of fluid to the actuators.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

24 x 12 Standard Trim Plane AssemblyBennett trim planes are made of high-quality 304 stainless steel and remain strong and rigid, even in the most challenging situations. Each trim plane assembly includes a trim plane, backing plate and hinge for one side of the boat.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

Auto Tab RetractorAutomatically retracts tabs when boat?s ignition is turned off. Trailered or dry storage boats have added defense from trim tab damage with them "full-up" during hauling, trailering and storage. Ensures trim tabs are all the way up every time boat is started if boat is not equipped with trim tab indicators. Easily installed under the instrument panel, the ATR connects to the trim tab control and engine ignition switch.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

SailPod Uncut for 9.5"-12" Wide Guard - 12.75"W x 8.75"H Usable FaceSafeguard your essential marine electronics with Seaview Pods, meticulously engineered for a sleek, flush-mount aesthetic that seamlessly integrates with your vessel's design. Constructed from high-strength, acrylic-capped ABS material, the pods offer exceptional durability and structural rigidity. Featuring an advanced double gasket sealing system and robust security hardware, the pods deliver unmatched protection against water ingress, corrosion, and the harshest marine environments.Features: Equipped with two high-polished stainless steel clamps with a continuous radius design, enabling a precise viewing angle at the time of installation. Designed to fit most steering systems, including Jefa, Whitlock, and Edson. Universal rail clamps securely grip 1", 1.125", and 1.25" (25mm, 29mm, and 32mm) rails, while also accommodating standard 9.5" and 12" (241mm and 305mm) guard rails, as well as non-standard variations. Specifications: Cut/Uncut: Uncut Mounting Style: Pedestal Usable Face: 12.75"W x 8.75"H Box Dimensions: 8"H x 12"W x 17"L WT: 10 lbs UPC: 850073256336

Read more less

Starlink Mini Quick Release Base Mount Only for Multiple Location UseBase mount only for use with APXMINIQR for multiple mounting location applications.

Read more less

SailPod Uncut for 9.5"-12" Wide Guard - 11.125"W x 8"H Usable FaceSafeguard your essential marine electronics with Seaview Pods, meticulously engineered for a sleek, flush-mount aesthetic that seamlessly integrates with your vessel's design. Constructed from high-strength, acrylic-capped ABS material, the pods offer exceptional durability and structural rigidity. Featuring an advanced double gasket sealing system and robust security hardware, the pods deliver unmatched protection against water ingress, corrosion, and the harshest marine environments.Features: Equipped with two high-polished stainless steel clamps with a continuous radius design, enabling a precise viewing angle at the time of installation. Designed to fit most steering systems, including Jefa, Whitlock, and Edson. Universal rail clamps securely grip 1", 1.125", and 1.25" (25mm, 29mm, and 32mm) rails, while also accommodating standard 9.5" and 12" (241mm and 305mm) guard rails, as well as non-standard variations. Specifications: Cut/Uncut: Uncut Mounting Style: Pedestal Usable Face: 11.125"W x 8"H Box Dimensions: 7"H x 10"W x 14"L WT: 8.3 lbs UPC: 850073256367

Read more less

Starlink Mini Roof MountThe Seaview APXMRM Starlink Mini Roof Mount is the ultimate surface mount solution designed primarily for rugged vehicles, including jeeps, UTVs, trucks, and more, while also suiting a range of outdoor applications like marine vessels, RVs, and overland vehicles. Ensures optimal performance for the Starlink Mini Antenna, even in extreme conditions.Ultra-Compact Mounting FootprintOne of the smallest in its class — preserves valuable deck/space real estate where most competing mounts demand far more room.Features: Heavy-Duty Construction for Rugged Durability - Crafted from marine-grade aluminum or steel, specifically designed for the marine environment, the APXMRM features a 3-part polyurethane primer and powder coat to ensure the best possible finish and exceptional corrosion resistance. This robust construction securely holds the Starlink antenna, making it ideal for the toughest terrains and climates. Enhanced Stability with Versatile Mounting Options - Equipped with quick-release knobs or security bolts, the APXMRM ensures the Starlink Mini Antenna stays firmly in place, offering flexibility for both temporary and permanent installations on moving vehicles. Its low-profile design, standing only 2" tall, maintains an aerodynamic shape. Customizable Fit for Added Protection - The mount allows the antenna to be adjusted vertically, accommodating an optional protective panel as needed, enhancing safety and adaptability across various setups. Built for Extreme Conditions - Designed with durability and safety in mind, the APXMRM includes Seaview's CG20PB small round cable seal for a waterproof cable entry, safeguarding your setup in harsh environments. Choose the APXMRM for a heavy-duty, reliable, and customizable mount that ensures your Starlink Mini Antenna performs flawlessly in any rugged condition.

Read more less

SailPod Uncut for 9.5"-12" Wide Guard - 15.18"W x 9.85"H Usable FaceSafeguard your essential marine electronics with Seaview Pods, meticulously engineered for a sleek, flush-mount aesthetic that seamlessly integrates with your vessel's design. Constructed from high-strength, acrylic-capped ABS material, the pods offer exceptional durability and structural rigidity. Featuring an advanced double gasket sealing system and robust security hardware, the pods deliver unmatched protection against water ingress, corrosion, and the harshest marine environments.Features: Equipped with two high-polished stainless steel clamps with a continuous radius design, enabling a precise viewing angle at the time of installation. Designed to fit most steering systems, including Jefa, Whitlock, and Edson. Universal rail clamps securely grip 1", 1.125", and 1.25" (25mm, 29mm, and 32mm) rails, while also accommodating standard 9.5" and 12" (241mm and 305mm) guard rails, as well as non-standard variations. Specifications: Cut/Uncut: Uncut Mounting Style: Pedestal Usable Face: 15.18"W x 9.85"H Box Dimensions: 8"H x 11"W x 17"L WT: 10.65 lbs UPC: 850073256343

Read more less

MaxComplete Compound - 32ozMalco Marine MaxComplete next-generation cutting compound provides aggressive cutting action for heavy scratch removal and produces a gloss final finish.  This water-based, easy-to-cleanup, emulsion formula is designed to remove P600 and finer sand scratches and light-heavy oxidation on fiberglass, gel coat, and selected painted surfaces in marine and industrial applications.Features: Versatile Formula: Can be used on Gelcoat, fiberglass, painted surfaces, and industrial applications Water-based formula: Environmentally friendly for use in Marinas, safe to use, easy clean-up Aggressive formula: Removes fine sand scratches and oxidation Specifications: Type: Restoration & Compounds Box Dimensions: 3"H x 3"W x 10"L WT: 2.75 lbs UPC: 075929730321 Quick Guide (pdf)

Read more less

Express Shine SiO2 Detail Spray - 16ozMalco Marine Express Shine SiO2 Detail Spray is a quick and easy-to-use spray-on agent, paint protectant, and gloss amplifier. Express Shine can be applied wet or dry to all exterior surfaces, leaving a water-beading, ultra-slick, hydrophobic layer of protection and a shiny lasting finish for up to 60 days. This quick detailer also protects paint from sun damage with UV inhibitors.  Express Shine also does a great job as a glass cleanerFeatures: Easy to use: Quick, easy-on, easy-off formula, on wet or dry surfaces SiO2 protection: Water beading, ultra-slick hydrophobic surface UV protection: Protects the surface from the Sun's UV rays Safe on multiple surfaces: Safe for all marine exterior surfaces, reducing the need for multiple products Specifications: Type: All Purpose Box Dimensions: 3"H x 3"W x 10"L WT: 1.2 lbs UPC: 075929997502 Quick Guide (pdf)

Read more less

Gel Coat Compound - 32ozMalco Marine Gel Coat is the perfect compound for marine and industrial applications. Gel Coat Compound is VOC-compliant and a water-based product. This easy-to-use and easy-to-clean-up formula significantly reduces manufacturing and buffing time. It removes P1000 or finer sand scratches and medium to light oxidation. Gel Coat Compound quickly leaves a deep, high gloss finish without the use of waxes, silicones, or fillers.   Features: Fast cutting: Removes P1000 or finer sand scratches and medium to light oxidation on gel coat surfaces Increased productivity: Easy to use, quick cleanup, and leaves a high gloss finish Water-based formula: Environmentally friendly, easy to use Specifications: Type: Restoration & Compounds Box Dimensions: 3"H x 3"W x 10"L WT: 2.75 lbs UPC: 075929998288 Quick Guide (pdf)

Read more less

Super Cut Compound - 32ozMalco Marine Super Cut Compound is an ultra-aggressive compound designed to remove P800 and finer dual-action or wet-sand scratches and medium to light oxidation from gel coat, fiberglass, and select painted surfaces.Features: Versatile formula: Safe for gelcoat, fiberglass, and painted surfaces Ultra aggressive compound: Removes P800 and finer dual action or wet sand scratches and light to medium oxidation Water-based formula: Environmentally friendly, easy to use Specifications: Type: Restoration & Compounds Box Dimensions: 3"H x 3"W x 10"L WT: 2.85 lbs UPC: 075929998301 Quick Guide (pdf)

Read more less

HydroFoam Ultra-Concentrated Boat Wash - 32ozMalco Marine HydroFoam Ultra Concentrated Boat Wash creates thick, rich suds to remove algae, grime, oil, fish blood, salt, and dirt from fiberglass, gelcoat, metal, and painted marine surfaces. This phosphate-free, biodegradable formula cleans without stripping waxes, rinses easily, and leaves no residue.Features: Versatile use formula: Ideal for fiberglass, gel coat, and painted surfaces, sea deck, glass, teak, and other surfaces Phosphate-free, biodegradable formula: Environmentally friendly formula can be used in marinas Highly concentrated formula, 1:128 dilution ratio: High sudsing formula penetrates to remove dirt, grease, and grime, while leaving a clean surface Specifications: Type: Washes Box Dimensions: 3"H x 3"W x 10"L WT: 2.4 lbs UPC: 075929997724 Quick Guide (pdf)

Read more less

MaxFinishing Polish - 32ozMalco Marine MaxFinishing Polish is an advanced all-in-one polish and swirl remover. It can be used on gel coat, fiberglass, and select painted surfaces. MaxFinishing Polish creates a rich, deep gloss and swirl-free finish in a single step after compounding.Features: All-in-one polish: Leaves a rich, deep gloss and a swirl-free finish. Versatile Formula: Can be used on gel coat, fiberglass, and painted surfaces Water-based formula: Environmentally friendly for use in Marinas, safe to use, easy clean-up Specifications: Type: Waxes & Polishes Box Dimensions: 3"H x 3"W x 10"L WT: 2.3 lbs UPC: 075929735326 Quick Guide (pdf)

Read more less

Aluminum 8° Wedge Base for Starlink Flat High-Performance Antenna - WhiteThe Seaview Aluminium 8° Wedge Base for the Starlink Flat High-Performance antenna has been specifically designed for the marine environment (chem-treated with a 3-part polyurethane prime and powder coat to ensure the best possible finish and corrosion resistance). *This wedge base is a direct replacement for the gray wedge base that comes with the Starlink antenna.Features: Designed to fit the Starlink Flat High-Performance Antenna. Pre-drilled mounting holes allow the hardware to fasten directly to the wedge. Drilled and tapped for the cable seal that is already provided with the Starlink antenna.  No need to cut the Starlink connectors for installation. Pre-drilled with the Seaview modular top hole pattern for the option to fit on top of any Seaview modular mount. Specifications: Construction: Aluminum Type: Wedges Box Dimensions: 7"H x 15"W x 20"L WT: 4.05 lbs UPC: 850047035516

Read more less

Removable Base Kit for APXMDM Surface Mount for Starlink MiniThe optional removable base kit (APXMDMRB) can be used to easily remove the Starlink Mini antenna when needed. These are black anodized 3/8" thick aluminum strips. The removable base kit simply mounts to your desired mounting surface and is pre-drilled and tapped so that the surface mount APXMDM can mount directly on top. The removable base kit is a great option if you plan to use the Starlink Mini in more than one location.Choose the Seaview APEX APXMDM and APXMDMRB for a durable, reliable, and easy-to-remove mount that ensures your Starlink Mini Antenna performs flawlessly in any condition.

Read more less

18" Radar Mast PlatformSeaview Mast Mounts are designed to have the radar or satdome as close as possible to the mast. Ultra heavy duty mounting feet and rivets are used to secure the Mast Mount to the mast.AdjustableDesigned with fore and aft adjustable rails so that you can have the radar as close as possible to the mast.Incredible StrengthThe solid under body construction not only greatly improves strength but also hides radar cables. On certain models.AccessoriesPre-drilled under body allows for flood lights or horns to be mounted on certain models.Compatible Manufacturers: B&G Garmin Humminbird Lowrance Raymarine SImrad Specifications: Type: Mast Mount Box Dimensions: 7"H x 13"W x 20"L WT: 8.25 lbs UPC: 839662006606 Quick Guide (pdf)

Read more less