Hawk Wind Indicator for Boats up to 8M - 10"The Hawk is the original Hawk Wind Indicator and sets the standard by which all Wind Indicators are judged. Lightweight with a balanced vane arm and the Hawk "V" jewel bearing surface this is the ultimate in Wind Indicator technology. The Vane arm is made from tough Nylon giving good rigidity and UV Protection. The support rod is high grade aluminum allowing it to be bent if required or straightened should it be knocked or damaged. The easily removable mast clip can be mounted either vertically or horizontally and is easily removed without tools. Adjust and lock the reference arms at any angle for quick, at a glance indication or either gybing or tacking angles.Specifications: Vane Arm Length 27cm (10.6") Overall Height 28cm (11") Overall Weight 25 grams Specifications: Type: Wind Indicator Instrument Function: Wind Box Dimensions: 2"H x 4"W x 13"L WT: 0.1 lbs UPC: 652773100205

Read more less

KeelGuard® - 6' - SandThe Original Do-It-Yourself Keel Protector - Protect Your Investment Against Sand, Rocks & RampsWear and damage to your boat’s keel can break down its protective gelcoat finish, allowing water to reach and destroy the fiberglass laminates. Megaware KeelGuard®, the powerful abrasion-resistant protector, prolongs the life of your boat like nothing else.Megaware KeelGuard® EngineeringEvery aspect of the Megaware KeelGuard® has been designed with boat designers and 3M® engineers. Many factors contribute to its success. A precise, abrasive-resistant blend of polymers and urethanes achieve optimal durability and pliability. A pressure-sensitive adhesive creates strength, while permanently bonding and sealing Megaware KeelGuard®’s contoured edges to the hull surface. Angled grooves produce hydrodynamic channels, creating air pockets and providing a slicker surface. The perfect combination of these factors makes the Megaware KeelGuard® the easiest keel protector to install, and gives it unparalleled quality and dependability.Megaware KeelGuard® Colors & SizesMegaware KeelGuard® comes in 11 great looking colors to match virtually any boat. All colors are UV-stabilized for true color that lasts a lifetime. Megaware KeelGuard® is available in nine standard lengths or can be ordered in custom lengths.Lifetime WarrantyMegaware guarantees this Megaware KeelGuard® (to the original purchaser), against abrasive wear and adhesion failure during normal use of your boat, for as long as you own your boat.Features: Color: Sand KeelGuard® Size: 6' Boat Size up to 18' 3M® Technology 3M® Acrylic Pressure-Sensitive Adhesive Pliable & Tough Research & Technology Contoured Edge Protect Against Abrasive Sand, Rocks, Concrete Ramps and Oyster Beds Eliminate Costly Repairs Enjoy the Highest Quality and Superior Engineering Increase the Value of Your Boat 5” Width: Contact for Custom Sizes Made in the USA Specifications: Length: 6' Color: Sand Boat Length - Max (Feet): 18' Box Dimensions: 6"H x 8"W x 8"L WT: 3 lbs UPC: 672057204061 Brochure (pdf)

Read more less

lil' Fella Trolling PlateLittle brother to the Happy Troller® Fits all outboard motors up to and including 25hp Locks "down" for trolling, "up" for cruising Made of highest quality polycarbonates with stainless steel hardware Owner's Manual (pdf)

Read more less

40" x 80" 6mm Two Color Full Sheet - Brushed Texture - Camel/Beach Sand (1016mm x 2032mm x 6mm)The SeaDek Full Sheet is perfect for DIY boat flooring projects. This sheet features two colors, a modern brushed texture, and non-skid qualities for optimal comfort.Specifications: Colors: Camel/beach sand Dimensions: 40″ x 80″ (1016mm x 2032mm) Material Thickness: 6mm Texture: Brushed

Read more less

Single Cell Phone Dash Pocket - Mocha/BlackThe SeaDek Cell Phone Dash Pocket features a cut-out size pocket to fit most cell phones.Features: Keeps phones and other small items stored safely Adheres directly to the dashboard Specifications: Color: Mocha/Black Overall Dimensions: 6.9″ x 9.9″ Pocket Dimensions: 4.5″ x 7.5″ Material Thickness: 20mm Texture: Brushed

Read more less

YETI Roadie 24 Teak Cooler Pad - 6mm - Storm Grey/BlackThis YETI Roadie 24 cooler pad is a custom fit for the YETI Roadie 24 Cooler.Features: The cooler pad includes a routed “SD” logo Teak routing design Specifications: Color: Storm Grey/Black Dimensions: 14.43″ x 11.71″ Material Thickness: 6mm Texture: Brushed

Read more less

40" x 80" 6mm Two Color Diamond Full Sheet - Brushed Texture - Brown/Black (1016mm x 2032mm x 6mm)SeaDek Sheet Material is the perfect solution for DIY boat flooring projects. Featuring a modern brushed texture and exceptional non-skid qualities, this SeaDek Diamond Full Sheet is 40″ x 80″ and 6mm thick, providing the perfect blend of comfort and durability.Easily cut to size with a sharp razor knife, SeaDek sheets are perfect for many different applications, including floors, seating, cooler tops, and poling platforms. The possibilities are endless! All SeaDek products come backed with SeaDek's pressure-sensitive adhesive for easy peel-and-stick application.Specifications: Colors: Brown/black Dimensions: 40″ x 80″ (1016mm x 2032mm) Material Thickness: 6mm Texture: Brushed Pattern: Diamond

Read more less

40" x 80" 5mm Full Sheet - Wood Grain Laser Pattern - Storm Grey (1016mm x 2032mm x 5mm)The SeaDek Full Sheet is perfect for DIY boat flooring projects. This sheet has a wood grain laser pattern, a modern brushed texture, and non-skid qualities for optimal comfort.Specifications: Color: Storm grey Dimensions: 40″ x 80″ (1016mm x 2032mm) Material Thickness: 5mm Pattern: Laser  Texture: Brushed

Read more less

36” Routed Ruler - 6mm - Brushed Texture - Dark Grey/BlackThe SeaDek 36 in. Fish Ruler offers a permanent and attractive alternative to stickers, tape measures, and other measuring devices. This ruler is 6mm thick with a brushed texture and has a two-toned color feature that will stand out on any boat.*Not to be used as a legal measuring device; the application may cause distortion.Features: CNC routed measurements Easy to clean Routed numbers that will not fade or break down and utilize peel-and-stick pressure-sensitive adhesive for easy installation Provide a non-skid surface for holding slippery fish in place for measurement Specifications: Color: Dark grey/black Overall Dimensions: 4″ x 38.5″ Material Thickness: 6mm Texture: Brushed

Read more less

48” Routed Ruler - 6mm - Brushed Texture - Mocha/BlackThe SeaDek 48 in. Fish Ruler offers a permanent and attractive alternative to stickers, tape measures, and other measuring devices. This ruler is 6mm thick with a brushed texture and has a two-toned color feature that will stand out on any boat.*Not to be used as a legal measuring device; the application may cause distortion.Features: CNC routed measurements Easy to clean Routed numbers that will not fade or break down and utilize peel-and-stick pressure-sensitive adhesive for easy installation Provide a non-skid surface for holding slippery fish in place for measurement Specifications: Color: Mocha/black Overall Dimensions: 4″ x 50″ Material Thickness: 6mm Texture: Brushed

Read more less

40" x 80" 5mm Full Sheet - Wood Grain Laser Pattern - Terra (1016mm x 2032mm x 5mm)The SeaDek Full Sheet is perfect for DIY boat flooring projects. This sheet has a wood grain laser pattern, a modern brushed texture, and non-skid qualities for optimal comfort.Specifications: Color: Terra Dimensions: 40″ x 80″ (1016mm x 2032mm) Material Thickness: 5mm Pattern: Laser  Texture: Brushed

Read more less

48” Routed Ruler - 6mm - Brushed Texture - Dark Grey/BlackThe SeaDek 48 in. Fish Ruler offers a permanent and attractive alternative to stickers, tape measures, and other measuring devices. This ruler is 6mm thick with a brushed texture and has a two-toned color feature that will stand out on any boat.*Not to be used as a legal measuring device; the application may cause distortion.Features: CNC routed measurements Easy to clean Routed numbers that will not fade or break down and utilize peel-and-stick pressure-sensitive adhesive for easy installation Provide a non-skid surface for holding slippery fish in place for measurement Specifications: Color: Dark grey/black Overall Dimensions: 4″ x 50″ Material Thickness: 6mm Texture: Brushed

Read more less

40" x 80" 6mm Two Color Diamond Full Sheet - Brushed Texture - Mocha/Black (1016mm x 2032mm x 6mm)SeaDek Sheet Material is the perfect solution for DIY boat flooring projects. Featuring a modern brushed texture and exceptional non-skid qualities, this SeaDek Diamond Full Sheet is 40″ x 80″ and 6mm thick, providing the perfect blend of comfort and durability.Easily cut to size with a sharp razor knife, SeaDek sheets are perfect for many different applications, including floors, seating, cooler tops, and poling platforms. The possibilities are endless! All SeaDek products come backed with SeaDek's pressure-sensitive adhesive for easy peel-and-stick application.Specifications: Colors: Mocha/black Dimensions: 40″ x 80″ (1016mm x 2032mm) Material Thickness: 6mm Texture: Brushed Pattern: Diamond

Read more less

YETI Roadie 24 Teak Cooler Pad - 6mm - Mocha/BlackThis YETI Roadie 24 cooler pad is a custom fit for the YETI Roadie 24 Cooler.Features: The cooler pad includes a routed “SD” logo Teak routing design Specifications: Color: Mocha/Black Dimensions: 14.43″ x 11.71″ Material Thickness: 6mm Texture: Brushed

Read more less

Combo Dash Pocket - Caribbean Blue The SeaDek Combo Dash Pocket features a cell phone pocket and an extra cut-out for additional storage.Features: Keeps phones and other items stored safely Adheres directly to the dashboard Secures personal items, big or small Specifications: Color: Caribbean Blue Overall Dimensions: 15.1″ x 9.9″ Pocket #1 Dimensions: 4.5″ x 7.5″ Pocket #2 Dimensions: 7.5″ x 7.5″ Material Thickness: 20mm Texture: Brushed 

Read more less

Combo Dash Pocket - MochaThe SeaDek Combo Dash Pocket features a cell phone pocket and an extra cut-out for additional storage.Features: Keeps phones and other items stored safely Adheres directly to the dashboard Secures personal items, big or small Specifications: Color: Mocha Overall Dimensions: 15.1″ x 9.9″ Pocket #1 Dimensions: 4.5″ x 7.5″ Pocket #2 Dimensions: 7.5″ x 7.5″ Material Thickness: 20mm Texture: Brushed

Read more less

Combo Dash Pocket - Desert Camo/BlackThe SeaDek Combo Dash Pocket features a cell phone pocket and an extra cut-out for additional storage.Features: Keeps phones and other items stored safely Adheres directly to the dashboard Secures personal items, big or small Specifications: Color: Desert Camo/Black Overall Dimensions: 15.1″ x 9.9″ Pocket #1 Dimensions: 4.5″ x 7.5″ Pocket #2 Dimensions: 7.5″ x 7.5″ Material Thickness: 20mm Texture: Brushed

Read more less

Shore Power Relay - 240VThe 240VAC Shore Power Relay is used to detect presence and loss of AC shore power. The relay is meant to be hardwired directly to your AC distribution panel. This relay is the hard wired alternative to the Siren Marine Shore Power Sensor Plug for boats with 240VAC systems.Features: Coil Voltage: 240VAC Contact Current: 10A Works with MTC and Siren 3 Pro

Read more less

Actuator Extension Harness - 20' - 14 Awg 20' Deutsch-Connected Extension 14 Awg Abyc Compliant WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

40" x 80" 6mm Two Color Diamond Full Sheet - Brushed Texture - Cool Grey/Storm Grey (1016mm x 2032mm x 6mm)SeaDek Sheet Material is the perfect solution for DIY boat flooring projects. Featuring a modern brushed texture and exceptional non-skid qualities, this SeaDek Diamond Full Sheet is 40″ x 80″ and 6mm thick, providing the perfect blend of comfort and durability.Easily cut to size with a sharp razor knife, SeaDek sheets are perfect for many different applications, including floors, seating, cooler tops, and poling platforms. The possibilities are endless! All SeaDek products come backed with SeaDek's pressure-sensitive adhesive for easy peel-and-stick application.Specifications: Colors: Cool grey/storm grey Dimensions: 40″ x 80″ (1016mm x 2032mm) Material Thickness: 6mm Texture: Brushed Pattern: Diamond

Read more less

36” Routed Ruler - 6mm - Brushed Texture - Aqua Camo/BlackThe SeaDek 36 in. Fish Ruler offers a permanent and attractive alternative to stickers, tape measures, and other measuring devices. This ruler is 6mm thick with a brushed texture and has a two-toned color feature that will stand out on any boat.*Not to be used as a legal measuring device; the application may cause distortion.Features: CNC routed measurements Easy to clean Routed numbers that will not fade or break down and utilize peel-and-stick pressure-sensitive adhesive for easy installation Provide a non-skid surface for holding slippery fish in place for measurement Specifications: Color: Aqua camo/black Overall Dimensions: 4″ x 38.5″ Material Thickness: 6mm Texture: Brushed

Read more less

36” Routed Ruler - 6mm - Brushed Texture - Storm Grey/Bimini BlueThe SeaDek 36 in. Fish Ruler offers a permanent and attractive alternative to stickers, tape measures, and other measuring devices. This ruler is 6mm thick with a brushed texture and has a two-toned color feature that will stand out on any boat.*Not to be used as a legal measuring device; the application may cause distortion.Features: CNC routed measurements Easy to clean Routed numbers that will not fade or break down and utilize peel-and-stick pressure-sensitive adhesive for easy installation Provide a non-skid surface for holding slippery fish in place for measurement Specifications: Color: Storm grey/bimini blue Overall Dimensions: 4″ x 38.5″ Material Thickness: 6mm Texture: Brushed

Read more less

48” Routed Ruler - 6mm - Brushed Texture - Aqua Camo/BlackThe SeaDek 48 in. Fish Ruler offers a permanent and attractive alternative to stickers, tape measures, and other measuring devices. This ruler is 6mm thick with a brushed texture and has a two-toned color feature that will stand out on any boat.*Not to be used as a legal measuring device; the application may cause distortion.Features: CNC routed measurements Easy to clean Routed numbers that will not fade or break down and utilize peel-and-stick pressure-sensitive adhesive for easy installation Provide a non-skid surface for holding slippery fish in place for measurement Specifications: Color: Aqua camo/black Overall Dimensions: 4″ x 50″ Material Thickness: 6mm Texture: Brushed

Read more less

40" x 80" 5mm Full Sheet - Wood Grain Laser Pattern - Dune (1016mm x 2032mm x 5mm)The SeaDek Full Sheet is perfect for DIY boat flooring projects. This sheet has a wood grain laser pattern, a modern brushed texture, and non-skid qualities for optimal comfort.Specifications: Color: Dune Dimensions: 40″ x 80″ (1016mm x 2032mm) Material Thickness: 5mm Pattern: Laser  Texture: Brushed

Read more less

Single Cell Phone Dash Pocket - Cool Grey/Storm GreyThe SeaDek Cell Phone Dash Pocket features a cut-out size pocket to fit most cell phones.Features: Keeps phones and other small items stored safely Adheres directly to the dashboard Specifications: Color: Cool Grey/Storm Grey Overall Dimensions: 6.9″ x 9.9″ Pocket Dimensions: 4.5″ x 7.5″ Material Thickness: 20mm Texture: Brushed

Read more less

Combo Dash Pocket - Bimini BlueThe SeaDek Combo Dash Pocket features a cell phone pocket and an extra cut-out for additional storage.Features: Keeps phones and other items stored safely Adheres directly to the dashboard Secures personal items, big or small Specifications: Color: Bimini Blue Overall Dimensions: 15.1″ x 9.9″ Pocket #1 Dimensions: 4.5″ x 7.5″ Pocket #2 Dimensions: 7.5″ x 7.5″ Material Thickness: 20mm Texture: Brushed

Read more less

Tea Tree Power Spray - 8ozTea Tree Power is the all-natural marine grade odor eliminator containing a proprietary blend of 100% Australian Tea Tree Oil and other natural ingredients. Its' powerful, yet pleasant smelling vapors, diffuse throughout your cabin and lockers, attacking and eliminating the source of unpleasant odors caused by mold, mildew, and bacteria.Not a cover-up fragrance, Tea Tree Power Spray starts controlling odors on contact providing continuous, natural, and long-lasting odor control for up to 3 months. It penetrates porous materials (cushions, carpets, and upholstery) delivering a deep cleaning with enduring odor protection. The 8 oz. spray works anywhere to clean and disinfect surfaces naturally. A spritz or two in your head and storage lockers will work instantly to break down and eliminate any unpleasant odors. Attack the mold and mildew on the hard surfaces in your cabin by spraying, letting sit for a few minutes, and wiping clean. It will work on most porous surfaces — carpets, cushions, upholstery — to penetrate and deliver a deep antibacterial cleaning. Spray on your kitchen counters and in your bathroom to instantly clean and disinfect. Follow up with a jar of the appropriate size of Tea Tree Power® Gel to give continuing, long-lasting protection. Specifications: Type: Fabric & upholstery Box Dimensions: 2"H x 3"W x 8"L WT: 0.65 lbs UPC: 028026191199

Read more less

SkegGuard® 27081 Stainless Steel Replacement SkegModel Guide Evinrude - 90-115-130 25” or 30” Shaft 2 Stroke 2006-Present 105-150 1994-2001 Johnson - 90-115-130 25” or 30” Shaft 2 Stroke 2006-Present 105-150 1994-2001 125 1994-1998 135 20" Shaft 2000-2006 150 20" Shaft 2002-2006 175-200 1994-2001 225-250-300 1994-2001 175-200-20” Shaft 2 Stroke 2006-Present Suzuki - 300 4 Stroke 2009-Present OMC Cobra - V6 & V8 1986-1994 Inexpensive Solution to a Broken Skeg - Save Hundreds of Dollars on Skeg Repairs & ReplacementMegaware SkegGuard® provides the best of two worlds. It will protect and prevent damage to your motor’s skeg and can also be used to repair and replace an already broken skeg.Protect Your Skeg with the Best ProtectorThe Megaware SkegGuard® is constructed of high quality marine grade 316 stainless steel that incorporates an extra reinforced wear tab across the bottom where the skeg is most vulnerable.This 3mm thickened lower plate will withstand damage or abrasion from hidden rocks and debris or accidental ramp dragging. The Megaware SkegGuard® conforms to your lower unit to insure there is no discernible drag or compromise in performance. A drain hole keeps water from collecting and remaining stagnant.Secured with self-locking hardware, the Megaware SkegGuard® can be installed with common tools in less than 10 minutes. It will provide years of service and save hundreds of dollars in potential repairs.If replacing an already broken skeg, the Megaware SkegGuard® can be installed on a lower unit with as little as 2 inches of skeg remaining. It will be stronger and much more affordable than welding and replacing a lower skeg.Megaware SkegGuard® is available in models to fit virtually any skeg.WarrantyMegaware guarantees your Megaware SkegGuard® for a period of three years from the date of purchase. Please retain receipt for proof of purchase date.Features: Mirror Polished Marine Grade 316 Stainless Steel Thickened Lower Wear Tab Protects Against Ramp Dragging and is Great for River Running Drain Hole Prevents Corrosion and Freezing Won’t Compromise Performance Do-It-Yourself Install in Less than 10 Minutes Installs with as Little as 2-3 Inches of Skeg Remaining Specifications: Color: Stainless Box Dimensions: 1"H x 9"W x 19"L WT: 1.4 lbs UPC: 672057270813 Brochure (pdf)

Read more less

KeelGuard® - 7' - BlackThe Original Do-It-Yourself Keel Protector - Protect Your Investment Against Sand, Rocks & RampsWear and damage to your boat’s keel can break down its protective gelcoat finish, allowing water to reach and destroy the fiberglass laminates. Megaware KeelGuard®, the powerful abrasion-resistant protector, prolongs the life of your boat like nothing else.Megaware KeelGuard® EngineeringEvery aspect of the patented Megaware KeelGuard® has been designed with boat designers and 3M® engineers. Many factors contribute to its success. A precise, abrasive-resistant blend of polymers and urethanes achieve optimal durability and pliability. A pressure-sensitive adhesive creates strength, while permanently bonding and sealing Megaware KeelGuard®’s contoured edges to the hull surface. Angled grooves produce hydrodynamic channels, creating air pockets and providing a slicker surface. The perfect combination of these factors makes the Megaware KeelGuard® the easiest keel protector to install, and gives it unparalleled quality and dependability.Megaware KeelGuard® Colors & SizesMegaware KeelGuard® comes in 11 great looking colors to match virtually any boat. All colors are UV-stabilized for true color that lasts a lifetime. Megaware KeelGuard® is available in nine standard lengths or can be ordered in custom lengths.Lifetime WarrantyMegaware guarantees this Megaware KeelGuard® (to the original purchaser), against abrasive wear and adhesion failure during normal use of your boat, for as long as you own your boat.Features: Color: Black KeelGuard® Size: 7' Boat Size up to 20' 3M® Technology 3M® Acrylic Pressure-Sensitive Adhesive Pliable & Tough Research & Technology Contoured Edge Protect Against Abrasive Sand, Rocks, Concrete Ramps and Oyster Beds Eliminate Costly Repairs Enjoy the Highest Quality and Superior Engineering Increase the Value of Your Boat 5” Width: Contact for Custom Sizes Made in the USA Specifications: Length: 7' Color: Black Boat Length - Max (Feet): 20' Box Dimensions: 6"H x 8"W x 8"L WT: 3.75 lbs UPC: 672057202074 Brochure (pdf)

Read more less

PRO Angler Wireless Remote SystemAn angler's dream! 'Control your troll' from anywhere on the boat. Select StrikeMode™ to adjust engine speed and make fish bite automatically!Features: Ergonomic remote Full wireless control Water-resistant Backlight LCD display Works with all Panther brand electro-steer models Long battery life Buttons: Power  Max throttle Idle/resume Steer left Steer right Mode select Increase speed Decrease speed Kit Includes: White wireless controller Radio receiver Servo 2 AA batteries Detachable lanyard Manual Mode: Precision speed control with the push of a button (0-100% in 250 incremental steps) Steer left and right with the push of a button Adjustable max. and min. speed Strike Mode: Automatically adjust engine speed based on the selected speed profile Four-speed profiles with simple-to-use adjustability It helps find the optimal lure speed that will entice the fish to bite *Steering feature only works with Panther Electro Steer units

Read more less

Soft-Mate Mini Radio HolderBeckson's Soft-Mate Mini Radio Holder holds smaller handheld GPS units, radios, and cell phones. The safety-soft flexible PVC holder won't hurt the user or the equipment.The Soft-mate mini radio holder is also a good place to store eyeglass cases, pens, pencils, or calculators. The unit is designed for boat and land vehicle and will find many useful places around the home. HH-81 measures 4-3/4" high, 2-3/4" wide, 2" deep Specifications: Type: Mounting Brackets Box Dimensions: 2"H x 3"W x 4"L WT: 0.2 lbs UPC: 021083009889

Read more less

3-3/8" (85MM) ViewLine Synchronizer -500/+500 RPM - 8 to 32V - White Dial & BezelOn pleasure boats with twin engine installations, the ViewLine synchronizer is an indispensable aid to ensure correct synchronized running of both units.Specifications: 8 and 14 pole Tyco / Hirschmann bush housing  Operating voltage 8 – 32 V Accuracy +/- 2.5 % of full scale reading Anti-fog double lens Protection rating front IP67, rear IP52 85 mm installation diameter 50 mm installation depth Operating temperature range -20 °C / +70 °C Reverse polarity protection This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Gauge Type: Synchronizer Gauge Size: 3-3/8" Voltage - Input Range (Volts): 8-32v Box Set: No Series: ViewLine Box Dimensions: 4"H x 8"W x 8"L WT: 0.75 lbs UPC: 7640178722262

Read more less

Wash MittSoft, synthetic, absorbent wash mitt that can be used wet or dry.The Wash Mitt is made from soft, synthetic, absorbent fibers. The shaped thumb and elastic band base make for a comfortable, easy, snug fit, and can be used wet or dry. Specifications: Type: Tools & Accessories Box Dimensions: 2"H x 7"W x 11"L WT: 0.2 lbs UPC: 703485002841

Read more less

Shur-LOK Swivel Pad & ScrubbersMedium Scrubber Pad(2 pack) Specifications: Type: Vinyl & Rubber Box Dimensions: 3"H x 5"W x 10"L WT: 0.2 lbs UPC: 703485617021

Read more less

PRO 20' with Dual Flex Relief HP Quality HoseThe 1/2” ID HoseCoil PRO provides a 47% increase in flow rate over 3/8” ID. HoseCoil PRO features a large 4.75” coil for better ease of handling and dual strain reliefs to reduce kinking. The HoseCoil PRO is not only larger in size, it is made with much thicker material for added strength and durability. Built with 3/4” garden style fittings, it fits all standard US hose connections. Specifications: Type: Tools & Accessories Box Dimensions: 5"H x 5"W x 13"L WT: 2.05 lbs UPC: 659988120271

Read more less

Stainless Steel PRO Hose - 20’The Stainless Steel PRO is a commercial-grade hose with a flexible stainless steel core. The machined brass threaded end fittings provide optimal tolerance and corrosion resistance for connections to the spigot and nozzle. Also, the outer cover is made with UV-resistant 1000D Tetoron fabric, which has excellent resistance to abrasion and fading.Features: It provides superior strength and easily coils Mold and water-resistant Dries quickly Easily slide across surfaces without getting snagged Specifications:Length: 20 ft. Specifications: Type: Tools & Accessories Box Dimensions: 4"H x 9"W x 9"L WT: 3 lbs UPC: 659988124095

Read more less

120V AC Shore Power Relay - WiredThe 120VAC Shore Power Relay is used to detect presence and loss of AC shore power. The relay is meant to be hardwired directly to your AC distribution panel. This relay is the hard wired alternative to the Siren Marine Shore Power Sensor Plug for boats with 120VAC systems.Features: Coil Voltage: 120VAC Contact Current: 10A Quick Guide (pdf)

Read more less

Swivl-Eze Lock'N-Pin 3/4" Pin Seat Mount - Zinc CoatedSpecifications: Zinc-plated Tilt: 3 degrees Pin (inch): 2-3/4" Steel Pin with Spring ABYC Code: B (not to be used at the helm/driver position) Installed Height (inch): 2" #1 supplier of 3/4" pin seating hardware. Here's why: The 3/4" system gives you outstanding economical performance The design is proven by decades of experience The Difference: The patented Lock'N-Pin system leads the industry in safety Lock'N-Pin prevents unintentional detachment for seat mounts, posts, and bases Lock'N-Pin products exceed ABYC Standard H31.6.1 Not recommended to interchange with other manufacturers' products Quick Guide (pdf)

Read more less

Hustler® - Right Hand - Aluminum Propeller - H1-1011 - 3-Blade - 10.875" x 11 PitchTurning Point has built their reputation on a relentless focus on engineering the best performing aluminum propellers in the World. Utilizing state-of-the-art Squeeze Casting technology, they produce Hustler 3 Blade Propellers that run as fast as their competitors' Stainless Steel Props, and even sometimes faster! Super stiff metallurgy, unique blade geometry, aggressive pitch, rake, and cup all give you the best they can offer: Stainless Performance at Aluminum Prices! Not only does top speed, handling and hole shot improve, but also mid-range performance, which will save you a ton in gas usage. If you want the most your boat and engine combination can offer, then the Hustler 3 Blade delivers.The Three Blade Hustler is great for boaters looking to get the most top end out of their boat, and offer excellent bow lifting capabilities. These props are perfectly matched to mid-range horsepower pontoons, fishing, ribs, and tiller boats. It will fit all 6-75hp outboards with 2.5", 3", and 3.5" gearcases from all engine manufacturers.Squeeze Cast for Added StrengthStainless steel performance is built into the Hustler Aluminum prop line. This is achieved through unique blade geometry and an exclusive Turning Point manufacturing process, Squeeze Casting. This process generates the highest mechanical properties attainable in a cast aluminum prop resulting from high density tighter grain structure. Stiffer blades means less flex and a faster prop. Competitors' Aluminum propellers are manufactured utilizing old Die-Cast process that produces props with air bubble, voids, and granularity. Weak, lack of strength and stiffness. Difficult to repair. Blades Flex under load, inefficient, loss of propulsive efficiency.Long Lasting Ultracoat™ Powder Coated FinishExclusive to Turning Point, the Ultracoat powder coat rivals a fine automotive finish, and is more durable than paint. Utilizing a state-of-the-art five step process, Ultracoat gives the propeller a shiny, uniform appearance that enhances any boat's good looks. This is the Gold Standard in Aluminum Corrosion Protection. Prop looks Newer Longer! Compared to Competitors' 4 step Paint and Coating Processes that result in much less abrasion and corrosion resistance.Large Free Flowing Exhaust PortsTurning Point's Propeller Housings have massive Exhaust flow pathways. Their Propellers have 40% more exhaust flow Area versus competive product. More exhaust flow and less backpressure can generate more horsepower. Like headers for your boat.Turning Point manufactures Hustler propellers to fit 6-300+hp Evinrude®, Force®, Honda®, Johnson®, Mariner®, Mercruiser®, Mercury®, Nissan®, OMC®, Parsun®, Suzuki®, Tohatsu®, Volvo® Penta®, and Yamaha® Outboards and Sterndrives. Choose one of our Lifetime Warranty MasterGuard Installation Kits to fit your engine, then choose the propeller that matches your boating requirements. There are 3 and 4 blade, left and right rotation prop models with a variety of diameter and pitch options available for almost all boat types. Turning Point's Props Run Faster, Pull Harder, and Handle Better.Note: A Hub Kit is required for installation of this propeller. See the Turning Point Selection Chart or the Prop Wizard™ for hub kit selection.  WARNING: This product can expose you to chemicals including CARBON BLACK which is known to the State of California to cause cancer, and LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Diameter (Inches): 10-7/8" Material: Aluminum Pitch: 11 Rotation: Right Box Dimensions: 6"H x 13"W x 13"L WT: 3.95 lbs UPC: 652480100727 Quick Guide (pdf)Brochure (pdf)

Read more less

Clamp-On Rail Mounted Cup Holder - Small for Up to 1-1/4" Rail - GreyCamco's Clamp-On Rail Mounted Cup Holder provides a secure location to keep your beverage. It is a great addition to any boat with 3/4-inch to 1-1/4-inch rails. The secure clamp assembly keeps the cup holder in place with the help of tension adjustment screws. Swivel mount allows you to install on any angle rail keeping your cup holder level and in place. The cup holder is constructed of a durable, UV-resistant polymer and fits most standard sized drinks, cups, cans, bottles and tumblers.Features: The Perfect Boating or RV Accessory: Provides a secure location to keep your beverage; Cup holder mounts to 3/4-inch to 1-1/4-inch boat rails Compatibility: Fits most standard cups, cans, bottles and tumblers Swivels to Any Angle: Swivel mount allows you to install on any angle rail keeping your cup holder level and in place Durable Construction: Constructed of a durable, UV-resistant polymer Color: Grey

Read more less

Wiper Arm Deluxe Stainless Steel Single - 10"-14"Deluxe arms are used on Standard and Heavy-Duty motors.Features: Stainless Steel Arm has "articulating/bend-back" feature Motor shaft mounting has additional set screw clamping Compatible with 2.5, 1.5, 1000, MRV wiper motors Dry single wiper style

Read more less

Biodegradable Degreaser - 32ozThe Xanigo Marine Biodegradable Degreaser is USDA-certified and powerful enough for heavy, caked-on grease and oil while being safe for the watershed and marine life. This degreaser is a bio-based formula designed to outperform most degreasers in the marketplace. With this product, boaters will have a product that's not harming the environment or wildlife. This USDA-certified formula is considered the ultimate biodegradable.Directions: Spray it on, let it sit for 30-90 seconds, and then wipe it off with a rag. It's that easy!Specifications:Bottle Size: 32 ouncesThe Complete Process to Treat and Prevent Mold & Mildew on Vinyl Boat SeatsSTEP 1: Remove Mold & Mildew with Xanigo Marine's Mold & Mildew Stain RemoverXanigo Marin’s Mold & Mildew Stain Remover is a very effective way to remove mold and mildew. Being a harsh chemical, it should only be used once to remove the mold, and then the preventer should be applied to prevent the mold from coming back. Liberally apply the Mold & Mildew Stain Remover to the seats. Let it sit for 60-90 seconds but do not let it dry. An additional solution may need to be applied— keep it wet. Agitate in a circular motion with a brush to remove the mold from the pores. Rinse thoroughly with clean water.STEP 2: Neutralize the RemoverAfter rinsing the remover off with fresh water, it's important to make sure any leftover remover is neutralized so it doesn't dry out vinyl or impact stitching. Spray the Waterless Wash onto the seats and wipe it in with a microfiber cloth to neutralize the chemicals in the remover.STEP 3: Prevent Mold & Mildew with Xanigo Marine's Mold & Mildew PreventerWith just one application, a boat will be protected against mold and mildew for up to 90 days. The preventer creates a covalent bond with the surface on which it is applied. Users can apply this to almost any marine surface, including vinyl seats, life jackets, canvas, ropes, compartments, live wells, bilges, patio furniture, and other areas of high moisture.Spray the Mold & Mildew Preventer onto a clean, dry surface and spread it evenly with a microfiber cloth. Remember to spread, not wipe off.STEP 4: Maintain Seats with Xanigo Marine's Waterless WashKeep the boat clean between mold prevention applications without the use of harsh chemicals or wasting water. Spray the Waterless Wash onto the seats, let it sit for 15-20 seconds, and wipe it off with a microfiber cloth. Remove sunscreen (a major food source for mold) and leave a refreshing smell without impacting the protective layer created by the mold & mildew preventer.Also, a great way to shine up a gel coat quickly! Specifications: Type: Grease Box Dimensions: 3"H x 6"W x 10"L WT: 2.4 lbs UPC: 860007772757

Read more less

Freedom AtomizerThis high-powered sprayer is designed for boat detailers to prevent mold on boat seats, life jackets, canvas, ropes, carpets, and areas with high moisture.The Xanigo Marine Mold & Mildew Preventer prevents and protects against mold and mildew for up to 90 days with just one application! No wiping!When applied with the Xanigo Marine Sprayer, this system STOPS mold and mildew cold!Features:CordlessIncludes:Long-lasting residual protection 28oz canister 20v battery Fast charging dock Adjustable spray nozzle Jog wheel The Complete Process to Treat and Prevent Mold & Mildew on Vinyl Boat SeatsSTEP 1: Remove Mold & Mildew with Xanigo Marine's Mold & Mildew Stain RemoverXanigo Marin’s Mold & Mildew Stain Remover is a very effective way to remove mold and mildew. Being a harsh chemical, it should only be used once to remove the mold, and then the preventer should be applied to prevent the mold from coming back. Liberally apply the Mold & Mildew Stain Remover to the seats. Let it sit for 60-90 seconds but do not let it dry. An additional solution may need to be applied— keep it wet. Agitate in a circular motion with a brush to remove the mold from the pores. Rinse thoroughly with clean water.STEP 2: Neutralize the RemoverAfter rinsing the remover off with fresh water, it's important to make sure any leftover remover is neutralized so it doesn't dry out vinyl or impact stitching. Spray the Waterless Wash onto the seats and wipe it in with a microfiber cloth to neutralize the chemicals in the remover.STEP 3: Prevent Mold & Mildew with Xanigo Marine's Mold & Mildew PreventerWith just one application, a boat will be protected against mold and mildew for up to 90 days. The preventer creates a covalent bond with the surface on which it is applied. Users can apply this to almost any marine surface, including vinyl seats, life jackets, canvas, ropes, compartments, live wells, bilges, patio furniture, and other areas of high moisture.Spray the Mold & Mildew Preventer onto a clean, dry surface and spread it evenly with a microfiber cloth. Remember to spread, not wipe off.STEP 4: Maintain Seats with Xanigo Marine's Waterless WashKeep the boat clean between mold prevention applications without the use of harsh chemicals or wasting water. Spray the Waterless Wash onto the seats, let it sit for 15-20 seconds, and wipe it off with a microfiber cloth. Remove sunscreen (a major food source for mold) and leave a refreshing smell without impacting the protective layer created by the mold & mildew preventer.Also, a great way to shine up a gel coat quickly! Specifications: Type: Mildew & Moisture Box Dimensions: 7"H x 8"W x 11"L WT: 3.7 lbs

Read more less

Defender Atomizer - CordedThis high-powered sprayer is designed for boat detailers to prevent mold on boat seats, life jackets, canvas, ropes, carpets, and areas with high moisture.The Xanigo Marine Mold & Mildew Preventer prevents and protects against mold and mildew for up to 90 days with just one application! No wiping!When applied with the Xanigo Marine Sprayer, this system STOPS mold and mildew cold!Features:Version with cordIncludes: 28oz canister 16 ft. cord Adjustable spray nozzle Jog wheel The Complete Process to Treat and Prevent Mold & Mildew on Vinyl Boat SeatsSTEP 1: Remove Mold & Mildew with Xanigo Marine's Mold & Mildew Stain RemoverXanigo Marin’s Mold & Mildew Stain Remover is a very effective way to remove mold and mildew. Being a harsh chemical, it should only be used once to remove the mold, and then the preventer should be applied to prevent the mold from coming back. Liberally apply the Mold & Mildew Stain Remover to the seats. Let it sit for 60-90 seconds but do not let it dry. An additional solution may need to be applied— keep it wet. Agitate in a circular motion with a brush to remove the mold from the pores. Rinse thoroughly with clean water.STEP 2: Neutralize the RemoverAfter rinsing the remover off with fresh water, it's important to make sure any leftover remover is neutralized so it doesn't dry out vinyl or impact stitching. Spray the Waterless Wash onto the seats and wipe it in with a microfiber cloth to neutralize the chemicals in the remover.STEP 3: Prevent Mold & Mildew with Xanigo Marine's Mold & Mildew PreventerWith just one application, a boat will be protected against mold and mildew for up to 90 days. The preventer creates a covalent bond with the surface on which it is applied. Users can apply this to almost any marine surface, including vinyl seats, life jackets, canvas, ropes, compartments, live wells, bilges, patio furniture, and other areas of high moisture.Spray the Mold & Mildew Preventer onto a clean, dry surface and spread it evenly with a microfiber cloth. Remember to spread, not wipe off.STEP 4: Maintain Seats with Xanigo Marine's Waterless WashKeep the boat clean between mold prevention applications without the use of harsh chemicals or wasting water. Spray the Waterless Wash onto the seats, let it sit for 15-20 seconds, and wipe it off with a microfiber cloth. Remove sunscreen (a major food source for mold) and leave a refreshing smell without impacting the protective layer created by the mold & mildew preventer.Also, a great way to shine up a gel coat quickly! Specifications: Type: Mildew & Moisture Box Dimensions: 7"H x 8"W x 11"L WT: 4.05 lbs UPC: 860007772726

Read more less

Dock & Deck Cleaner - 1 GallonKeep the dock and deck looking great while reducing harmful chemical runoff!The base structure for the Xanigo Marine Dock & Deck Cleaner formula is made from plants, which enables it to have 94% bio-content as certified by the USDA. This uses next-generation renewable biosurfactant technology, is regarded as readily biodegradable, and is high-performing with high efficacy. Does not contain: Palm Oil, 1, 4-Dioxane, Formaldehyde, Proposition 65 Chemicals, Sulfates, Sodium Hydroxide, Glycol Ethers, Phosphates, Phthalates, Parabens, and AmmoniaInstructions for Use: For docks and decks, Xanigo Marine recommends a 1:5 to 1:20 dilution rate to enable proper cleaning. 1 gallon of Dock and Deck Cleaner to 5 to 20 gallons of water, depending on the job. This dilution ratio will provide effective cleaning power for composites, wood, and concrete Use a proper deck and dock brush with a minimum 2" bristle. The stiffness of the bristle should be tested on the dock users are trying to clean to determine which is the most effective For tough stains like blood, set-in bird drippings, or oils/greases, pour full strength into a spray bottle and spray the spots before scrubbing. After scrubbing the deck or dock, rinse with fresh water Specifications:Bottle Size: 1 gallonThe Complete Process to Treat and Prevent Mold & Mildew on Vinyl Boat SeatsSTEP 1: Remove Mold & Mildew with Xanigo Marine's Mold & Mildew Stain RemoverXanigo Marin’s Mold & Mildew Stain Remover is a very effective way to remove mold and mildew. Being a harsh chemical, it should only be used once to remove the mold, and then the preventer should be applied to prevent the mold from coming back. Liberally apply the Mold & Mildew Stain Remover to the seats. Let it sit for 60-90 seconds but do not let it dry. An additional solution may need to be applied— keep it wet. Agitate in a circular motion with a brush to remove the mold from the pores. Rinse thoroughly with clean water.STEP 2: Neutralize the RemoverAfter rinsing the remover off with fresh water, it's important to make sure any leftover remover is neutralized so it doesn't dry out vinyl or impact stitching. Spray the Waterless Wash onto the seats and wipe it in with a microfiber cloth to neutralize the chemicals in the remover.STEP 3: Prevent Mold & Mildew with Xanigo Marine's Mold & Mildew PreventerWith just one application, a boat will be protected against mold and mildew for up to 90 days. The preventer creates a covalent bond with the surface on which it is applied. Users can apply this to almost any marine surface, including vinyl seats, life jackets, canvas, ropes, compartments, live wells, bilges, patio furniture, and other areas of high moisture.Spray the Mold & Mildew Preventer onto a clean, dry surface and spread it evenly with a microfiber cloth. Remember to spread, not wipe off.STEP 4: Maintain Seats with Xanigo Marine's Waterless WashKeep the boat clean between mold prevention applications without the use of harsh chemicals or wasting water. Spray the Waterless Wash onto the seats, let it sit for 15-20 seconds, and wipe it off with a microfiber cloth. Remove sunscreen (a major food source for mold) and leave a refreshing smell without impacting the protective layer created by the mold & mildew preventer.Also, a great way to shine up a gel coat quickly!

Read more less

KeelGuard® - 4' - AlmondThe Original Do-It-Yourself Keel Protector - Protect Your Investment Against Sand, Rocks & RampsWear and damage to your boat’s keel can break down its protective gelcoat finish, allowing water to reach and destroy the fiberglass laminates. Megaware KeelGuard®, the powerful abrasion-resistant protector, prolongs the life of your boat like nothing else.Megaware KeelGuard® EngineeringEvery aspect of the patented Megaware KeelGuard® has been designed with boat designers and 3M® engineers. Many factors contribute to its success. A precise, abrasive-resistant blend of polymers and urethanes achieve optimal durability and pliability. A pressure-sensitive adhesive creates strength, while permanently bonding and sealing Megaware KeelGuard®’s contoured edges to the hull surface. Angled grooves produce hydrodynamic channels, creating air pockets and providing a slicker surface. The perfect combination of these factors makes the Megaware KeelGuard® the easiest keel protector to install, and gives it unparalleled quality and dependability.Megaware KeelGuard® Colors & SizesMegaware KeelGuard® comes in 11 great looking colors to match virtually any boat. All colors are UV-stabilized for true color that lasts a lifetime. Megaware KeelGuard® is available in nine standard lengths or can be ordered in custom lengths.Lifetime WarrantyMegaware guarantees this Megaware KeelGuard® (to the original purchaser), against abrasive wear and adhesion failure during normal use of your boat, for as long as you own your boat.Features: Color: Almond KeelGuard® Size: 4' Boat Size up to 14' 3M® Technology 3M® Acrylic Pressure-Sensitive Adhesive Pliable & Tough Research & Technology Contoured Edge Protect Against Abrasive Sand, Rocks, Concrete Ramps and Oyster Beds Eliminate Costly Repairs Enjoy the Highest Quality and Superior Engineering Increase the Value of Your Boat 5” Width: Contact for Custom Sizes Made in the USA Specifications: Length: 4' Color: Almond Boat Length - Max (Feet): 14' Box Dimensions: 6"H x 8"W x 8"L WT: 2.9 lbs UPC: 672057203040 Brochure (pdf)

Read more less

Bubble Gum Micro Polish + High Gloss Polymer - GallonThe micro-polish will remove fine swirls and light oxidation, and the high-gloss polymer protectant will deliver a super shine and extreme durability. For best results, use a rotary machine with a yellow polish pad or random orbital polisher and finish with a topcoat of Smoove White Cloud.Features:It contains a micro-polish with a high-gloss polymerSpecifications:Size: Gallon Specifications: Type: Waxes & Polishes Box Dimensions: 3"H x 7"W x 12"L WT: 8.9 lbs UPC: 704660916205

Read more less

Bucket GrateFeatures: Keeps brushes and mops out of dirty water Built-in measuring cups for optimal soap use Specifications: Type: Tools & Accessories Box Dimensions: 3"H x 10"W x 10"L WT: 0.55 lbs UPC: 703485121085

Read more less