Long Towel Bar 23"L x 1"H x 2-1/2"D Includes mounting hardware

Read more less

Sealink 12V Plug & Receptacle12VPKProduct Features: SeaLink Deluxe 12 Volt Receptacle and Plug Part Nos. 12VRC & 12VPG packaged together WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Misc Box Dimensions: 2"H x 4"W x 7"L WT: 0.2 lbs UPC: 093344304477

Read more less

Plastic Boat Hook Hull ScraperBoat Hook Hull Scraper can be attached to any Sea-Dog® Boat Hook/Boat Pole or universal/Acme threaded device. Great for waterline cleaning from inside the vessel and scraping ice from windshields.Specifications: Scraper Width: (inch) 6" Scraper Height: (inch) 3" WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Stainless 1" Hinged Jaw Slide with BoltThese Slide Fittings are used as part of a Bimini top system to install a new Bimini top, add additional support arms to an existing one, or customize a cock pit or sun deck awning. Jaw Slides attach an eye end securely to support tubing. The set screw on the back allows you to quickly and easily adjust the placement of these slides where they are needed. Hinged Jaw Slides are ideal for mounting on handrails, or in applications where it is not possible or convenient to slide the fitting onto the tubing. Jaw Slides fit tubing from 3/4” – 1-1/8”. Set screws can be purchased separately (299999-1). Requires 1/8" Allen wrench to install. Constructed of corrosion-resistant investment cast 316 stainless steel. Specifications: Tube OD: 1" Pin Size: 1/4" Weight: 0.38 WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Oblong Captive Garboard Drain & Plug - 316 Stainless SteelThis Oblong Captive Garboard Drain & Plug sits lower in the stern for more water removal. Captive plug prevents plug from being lost. Constructed of corrosion resistant investment cast 316 stainless steel. Installs with two #8 FH fasteners (not included). WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Round Tube Rail Mount Fillet Table - 20" Features: Solid one-piece construction for long life and easy maintenance Mounting system includes: Rail mount adapter, Rail mount clamps (pr), and all assembly hardware UV stabilized high-density polypropylene construction Medium table is 20" wide by 12-5/8" deep Fits round tubing 3/4"-1-1/4" diameter Easily accessible knife and pliers holders, large table features additional hose holder and towel bar Knives and pliers not included WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Width: 20" Box Dimensions: 3"H x 17"W x 21"L WT: 6.6 lbs UPC: 035514326780

Read more less

Aluminum Plate Anode - 12" x 6" x 1/2"Specifications: Material: Aluminum Plate for hulls Dimensions: 12" x 6" x 1/2" Specifications: Material: Aluminum Box Dimensions: 1"H x 6"W x 12"L WT: 3.65 lbs UPC: 8059617816742

Read more less

Add-A-Snap - Black - 1-1/2" For use with canvas or nylon boat covers, the Add-A-Snap allows you to easily add length on hard to reach snaps from shrunken material. Nickel plated brass/nylon. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Stainless Steel Replacement Flag Pole - 30" The flag is attached to the flagpole using nylon adjustable flagpole clips in conjunction with stainless steel, spring wire, quick release clips which allows mounting flexibility for a variety of flag or pennant sizes.  Maximum speed 10 MPH.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Flags & Flag Poles Box Dimensions: 1"H x 1"W x 30"L WT: 0.45 lbs UPC: 035514328517

Read more less

Add-A-Snap - Black - 2-1/2" For use with canvas or nylon boat covers, the Add-A-Snap allows you to easily add length on hard to reach snaps from shrunken material. Nickel plated brass/nylon.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Boat Hook Three Sided Bristle Brush - Stiff Bristle These three-sided bristle brushes fit all Sea-Dog® boat hooks and all universal threaded devices. Stiff bristles are effective for jobs below the waterline, teak and other tough cleaning jobs. Side bristles make it easy to clean in hard to reach places. 10-1/2” head is longer than industry standard covering a larger cleaning area. Universal/Acme ThreadWARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Tools & Accessories Box Dimensions: 4"H x 5"W x 11"L WT: 0.65 lbs UPC: 035514491877

Read more less

Shaft AnodeMaterial: MagnesiumOuter Diameter: 2.58"Inner Diameter: 1.50"Height: 2.62"Weight: 0.35lbsHoles: 4 Specifications: Material: Magnesium Box Dimensions: 2"H x 3"W x 3"L WT: 0.4 lbs UPC: 8059617812447 Quick Guide (pdf)Owner's Manual (pdf)

Read more less

Echomaster™ Radar ReflectorGive ships a chance to see you in fog and low visibility. This model provides 12 square meters of radar cross section. Ranked on of the best radar reflectors and rated superior by SRI after the most rigorous tests ever conducted on radar reflectors - some costing 10 times as much.All our Echomaster models can be stored flat and assembled in minutes. The plates are made of sturdy, stamped 0.05 in. (1.3 mm) thick aluminum with riveted nylon corner latches for quick assembly or disassembly. Install around a backstay or make your own hanging bridle as described in the 16-page Radar Reflector Booklet included with Echomaster. Owner's Manual (pdf)

Read more less

Aerospace Protectant - 2ozOriginally engineered for aerospace and aviation applications, 303® Aerospace Protectant has found its way into millions of homes for day-to-day use on vehicles, sports equipment, patio furniture accessories, and more.  Unlike many protectants that leave greasy residues, Aerospace Protectant dries to a clear matte finish.   And because it’s water-based, this protectant is safe to use on all products, from your vehicle’s paint job and leather seats to internal engine parts.There’s a lot of power packed into this one product.  A premium surface treatment, Aerospace Protectant not only protects against fading, discoloration, and cracking from harmful UV rays but repels dust and stains, too.  Simply spray on and wipe dry for a beautiful, matte finish that protects your vehicle from road grime and your favorite belongings from dust and soiling. Best of all, each application will last for months.No other protectant beautifies as intensely or preserves as powerfully.  Keep UV-sensitive materials looking new, year after year.Features: Matte finish with no oily and greasy residue Keeps treated surfaces looking new Prevents fading and cracking Restores lost color and luster Powerful UV blockers Anti-static, repels smudges, dust, soiling, and staining Easy to use, simply spray on and wipe dry Safe and effective for vinyl, gel-coat, fiberglass, carbon fiber, synthetic/natural rubber, plastic, and finished leather *Sold as an IndividualWARNING: This product can expose you to chemicals including Ethylbenzene which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov. Specifications: Type: Waxes & Polishes Box Dimensions: 1"H x 2"W x 5"L WT: 0.2 lbs UPC: 082043003101

Read more less

Deluxe Stainless Steel Wiper Blade - 20"These blades work well on curved or flat windshields.Features: Works well on curved or flat windshields All stainless steel construction Marine grade silicone squeegee

Read more less

24V Chrome Plated Dual Trumpet Air HornThe Marinco FullBlast compressor driven air horns are the loudest and most complete line of 24V air horns available. All of our air horns produce sound levels ranging between 120 and 127dB, which means all of our air horns meet the ABYC and NMMA regulations for boats up to 20 meters/66 feet.Features: Non-corrosive Lexan polycarbonate diaphragm Includes compressor, air tubing, fittings, and hardware Dimensions: 17" L x 7" W x 3.75" H Maximum amp draw: 12 volt: 20 amps, 24 volt: 10 amps dB rating: 121 at one meter, 1/3 octave band Fundamental frequency 375+/-15Hz, 315+/-15Hz Specifications: Voltage - Input Range (Volts): 24v Color: Chrome Box Dimensions: 5"H x 7"W x 19"L WT: 5 lbs UPC: 035028106243

Read more less

12V International Shorty HornThe International Shorty Horn has a stainless steel diaphragm and mounting bracket in an ABS, triple chrome-plated housing.Features: Dimensions: 4.25" L x 5" W x 6.5" H Maximum amp draw: 4.5 Amps, 12 Volt Fundamental frequency: 310 +/- 20 Hz Loudest Marinco compact electric horn dB(A) rating: 123 at one meter Specifications: Voltage - Input Range (Volts): 12v Color: Chrome Box Dimensions: 4"H x 7"W x 10"L WT: 1.45 lbs UPC: 035028100364

Read more less

Wiper Arm Deluxe Black Stainless Steel Pantographic - 17"-22" AdjustableDeluxe arms are used on Standard and Heavy-Duty motors.Features: Stainless Steel Arm has "articulating/bend-back" feature Motor shaft mounting has additional set screw clamping For use with 2.5, 1.5 and MRV Motors Dry pantographic wiper style

Read more less

Tip Top Teak Wood Oil Sealer - GallonTip Top Teak's Wood-Oil Sealer is designed to seal and product clean teak.Features: Easy to use Lasts Extra Long Restores and protects teak and other woods Adds luster and beauty to your deckFor over 30 years Tip Top Products has been producing quality products forthe care and protection of your marine craft.Our Tip Top Line has alwaysbeen known as the choice of yachtsmen and boaters around the world,andour Wood -Oil Sealer has been proven time and again to be the premium sealerin the world.We are continuing to strive toward giving our customers thehighest quality products at a fair price and are designed to be "Simply theBest" Specifications: Type: Teak Box Dimensions: 4"H x 8"W x 12"L WT: 7.6 lbs UPC: 016196010020

Read more less

Shaft AnodeMaterial: ZincOuter Diameter: 2.14"Inner Diameter: 1"Height: 2.02"Weight: 0.88lbsHoles: 2 Specifications: Material: Zinc Box Dimensions: 2"H x 2"W x 2"L WT: 0.9 lbs UPC: 8059617812249 Quick Guide (pdf)Owner's Manual (pdf)Brochure (pdf)

Read more less

50A/125V Male Plug; 2 Pole, 3-Wire Ribbed, thick wall nylon housing for secure gripping Use with Weatherproof Cover for superior seal WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Plugs Box Dimensions: 3"H x 5"W x 9"L WT: 0.7 lbs UPC: 093344006517

Read more less

Pressure Sender 80 PSI 1/4-18 NPT Features: Ground - Standard Connection - Knurled Nut Voltage - 6-24V Thread - 1/8-27 NPTF Max. Pressure Range - 80 PSI / 5 bar (10-180Ohm) *Sold as an IndividualWARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Color: Silver Box Dimensions: 2"H x 2"W x 5"L WT: 0.25 lbs UPC: 754059004679

Read more less

4" Atlas Series Hot Shot™ Jack Plate Hole Shot Plate - VeradoREVOLUTIONARY. SIMPLE. UNIQUE. EXCITING. These are but a few of the comments coming from users of T-H Marine's HOT SHOT™ hole shot plates. This simple-but-revolutionary plate easily attaches to the bottom of our jack plate to provide an amazing 18 to 20 percent better hole shot. That is 2 to 3 seconds faster out of the hole. Hot Shot™ does this by dramatically reducing water drag on take off as well as serving as a center trim tab. An added advantage is the ability to stay on plane and virtually eliminating porpoising at lower speeds.Features: Models available for our ATLAS™ hydraulic jack plates and Z-LOCK™ manual plates.   Models Marked "T" Have side imaging Transducer Cut-Out. Slot fits most Model SI Transducers.  Models to Fit All ATLAS™ Jack Plates (both standard and heavy duty jack plates) Provides Improved Hole Shot Reduces Water Drag at Take Off Reduces Porpoising

Read more less

Mercury Verado 350 Aluminum Anode KitSpecifications: Material: Aluminum For Mercury Verado Specifications: Material: Aluminum Box Dimensions: 2"H x 5"W x 8"L WT: 1.4 lbs UPC: 8058774839502

Read more less

Mercury Bravo 3 2004 Anode KitContents: (1) 00835 (1) 00820 (2) 00818 (1) 00836 (1) 00815 Material: ZincPackaging: PolybagHardware: Included Specifications: Material: Zinc Box Dimensions: 2"H x 5"W x 9"L WT: 6.37 lbs UPC: 8059617818814 Quick Guide (pdf)Owner's Manual (pdf)

Read more less

Trim Tab AnodeSkeg For Engines - Yamaha 200-250Material: ZincTab Height: 2.76"Outer Diameter: 3.94"Weight: 1.50lbs Specifications: Material: Zinc Box Dimensions: 4"H x 4"W x 4"L WT: 1.55 lbs UPC: 8033837065296 Quick Guide (pdf)Owner's Manual (pdf)

Read more less

Rudder AnodeMaterial: ZincOuter Diameter: 3.63"Height: 0.52"Weight: 1.56lbs Full size and weight Rudder Each includes Stainless Steel hex nut and socket cap screw The captive hex nut is a great feature for underwater installations Specifications: Material: Zinc Box Dimensions: 2"H x 4"W x 4"L WT: 1.53 lbs UPC: 8033837068372 Quick Guide (pdf)Owner's Manual (pdf)Brochure (pdf)

Read more less

Z406 Hull Plate AnodePlates for HullsMaterial: ZincLength: 8.50"Width: 4.17"Height: 1.10"Weight: 6.73lbs Specifications: Material: Zinc Box Dimensions: 1"H x 5"W x 9"L WT: 6.8 lbs UPC: 8033837068792 Quick Guide (pdf)Owner's Manual (pdf)

Read more less

180° Adjustable Angle AdapterAttach your favorite Swobbit cleaning tool to one end, snap it onto the Perfect Pole Telescoping Handle and let the cleaning begin.  Makes cleaning areas normally inaccessible with conventional tools and adapters easy to reach.Features: Adjustable to 180° Eliminates unsafe and awkward positions  Reduces overextending and user fatigue when cleaning *Sold as an Individual Specifications: Type: Tools & Accessories Box Dimensions: 2"H x 3"W x 9"L WT: 0.3 lbs UPC: 633590666402 Brochure (pdf)

Read more less

Mercury Bravo 2-3 Anode KitContents: (1) 00815 (1) 00820 (2) 00818 Material: ZincPackaging: PolybagHardware: Included Specifications: Material: Zinc Box Dimensions: 2"H x 4"W x 9"L WT: 4.53 lbs UPC: 8033837068655 Quick Guide (pdf)Owner's Manual (pdf)

Read more less

PACE™ Orange Foam Medium Cut Pad - 3" *4-PackDesigned to work with PACE™ Medium Cut Compound.Features & Benefits: This hook-and-loop foam pad has small, open cells that keep the compound near the surface This pad provides a medium-level cut (up to P2500 sand scratches) but still finishes to a nice gloss Designed for quick cleaning Specifications: Type: Buffers & pads Box Dimensions: 2"H x 9"W x 12"L WT: 0.1 lbs UPC: 075929999865

Read more less

PACE™ Grey Foam Heavy Cut Pad - 5.5"This foam pad is designed to work on softer clears with Presta's PACE™ Heavy Cut Compound.Features & Benefits: This hook-and-loop foam pad has small, open cells that keep the compound near the surface This pad provides an aggressive cut (up to P1500 sand scratches) but still finishes to a nice gloss Designed for quick cleaning Specifications: Type: Buffers & pads Box Dimensions: 1"H x 8"W x 11"L WT: 0.05 lbs UPC: 075929701901

Read more less

PACE™ Purple Foamed Wool Heavy Cut Pad - 3" *4-PackDesigned to work on harder clears with PACE™ Heavy Cut Compound.Features & Benefits: This foamed wool pad cuts like wool and polishes like foam It is our most aggressive orbital pad for cutting, but it still finishes with a nice gloss Designed for quick cleaning Specifications: Type: Buffers & pads Box Dimensions: 1"H x 8"W x 11"L WT: 0.1 lbs UPC: 075929999841

Read more less

PACE™ Black Foam Ultimate Polish Pad - 3" *4-PackDesigned to work with PACE™ Ultimate Polish and Protective Glaze.Features & Benefits: This hook-and-loop foam pad has small, open cells that keep polish near the surface This pad provides a show car-level gloss and can be used for light correction Designed for quick cleaning Specifications: Type: Buffers & pads Box Dimensions: 1"H x 2"W x 8"L WT: 0.05 lbs UPC: 075929999858

Read more less

Green Double-Sided Wool Light Cutting/Polish Pad - 9"Blended wool, light cut compounding to heavy polishing pad, is fantastic for removing oxidation and light sanding scratches. Choose the size and connection type to fit your needs.Features: Hook & Loop Pads: Single-sided pads are 9" in diameter and feature 1-1/2" thick wool pile Quick Connect Pads: Double-sided, 9" in diameter, and feature a 1-1/2" thick wool pile. Must use Quik Connect Double Sided Adapter (890099P) 6" Screw-On Pads: Double-sided pad is the perfect choice for spot buffing, removing dirt nibs, and working on smaller surfaces such as motorcycles Specifications: Type: Buffers & pads Box Dimensions: 3"H x 9"W x 13"L WT: 0.9 lbs UPC: 075929701635

Read more less

PACE™ Grey Foam Heavy Cut Pad - 3" *4-PackThis foam pad is designed to work on softer clears with Presta's PACE™ Heavy Cut Compound.Features & Benefits: This hook-and-loop foam pad has small, open cells that keep the compound near the surface This pad provides an aggressive cut (up to P1500 sand scratches) but still finishes to a nice gloss Designed for quick cleaning Specifications: Type: Buffers & pads Box Dimensions: 2"H x 8"W x 10"L WT: 0.1 lbs UPC: 075929999872

Read more less

Coil Hose - 20'Camco’s 20-Foot Coiled Hose is ideal for marine use, as well as general cleaning, car washing and daily gardening. It features strain relief to help prevent kinking. Brass hose fittings are both durable and rust resistant. The hose self-coils for easy storage. Includes a 1-year limited warranty.Features: 20-foot coil hose is ideal for marine use, as well as general cleaning, car washing and daily gardening Strain relief reduces kinking Brass hose fittings are durable and rust resistant Hose self-coils for easy storage 1-year limited warranty *Storage bag not included Specifications: Type: Tools & Accessories Box Dimensions: 6"H x 8"W x 18"L WT: 2.25 lbs UPC: 014717419833

Read more less

Boss Style T-Fitting - NickelTypical Application:Fitting for back of helm in a dual station installation Specifications: ORB, Size #6 to 3/8 COMP FITTING Cylinder/Helm Side = 9/16 - 18 UNF 2A Hose Side = 9/16 - 24 UNEF 2A

Read more less

210 Plastic Cleaner Polish 14oz SprayThe professionals' choice for protecting and maintaining isinglass, plexiglas and vinyl. Anti-static, anti-fog and non-streaking. 210 Plastic Cleaner/Polish seals the pores in all plastics, leaving a protective coating with UV inhibitors to prevent browning and hardening. Provides plastics with a clear, lustrous look. Specifications: Type: Plastic Box Dimensions: 3"H x 3"W x 8"L WT: 1.2 lbs UPC: 818520000147

Read more less

Power A EE21 - Electronic Control Package-Dual Engine/Single Station - Electronic Throttle/Electronic ShiftPower A Mark II™ Electronics Control Systems Private Protocol can bus for data transmission Connection of multiple stations up to 4 controls Modular System Direct communication w/electronic engines (SAE J 1939 or NMEA 2000) Plug'N Play connectivity Automatic engines synchronization Dock Assist Fully programmable shift delays EE21 Package Includes: 42011T - (1) PA2-B2 - Dual Lever Control w/o Trim 42017F - (1) PA2-CU - Control Unit w/LED Diagnostc & Programming Screen 42018H - (1) PA2-VT - V-Throttle f/0-5V Interface 42028L - (1) PA2-NT - Network Terminator 42029N - (2) T-VT2 - Universal V-Throttle Cable 6.5' 42060G - (1) M-S1 - Solenoid Shift Cable, 3' 71021K - (2) CAN-10 - Network Connection Cable 33' 73639T - (2) CAN-1 - Network Connection Cable 3' 42023A - (1) PA2-SU - Electronic Shift Unit  42052H - (2) M-P1 - Power Supply Cable 6.5' Quick Guide (pdf)Brochure (pdf)

Read more less

Power A Mark II™Electronic Control System - Twin Engines w/out TrimThe easy to install Power A Mark II™ control system provides fingertip operation of throttle and shift levers. Using reliable and precise digital data transmission, this single or dual function control system is specifically designed to work on mechanically controlled as well as electronic and electro-hydraulic gas and diesel inboards, sterndrives and outboards. The Power A Mark II™ comes with many features including Dock Assist, which offers the operator the opportunity to reduce the sensitivity of the throttle function for easier dockside handling.Other standard features include RPM Synchronization, which reduces engine vibration and improves fuel economy, a High Idle feature to increase RPM where higher idle is necessary for cold engine operations, a programmable Trolling Valve Control and neutral Warm Up.The stylish and ergonmically designed control makes the Power A Mark II™ suitable for many types of applications ranging from sport boats, yachts and commercial applications.Available with and without trim, the control has audible and visual interfaces which alert the operator to the current status of the control system.With the ability to control up to 2 engines from up to 4 different stations, the Power A Mark II™ is a modular and flexible system with simple to install components.The unique Control Unit Display of the Power A Mark II™ provides simple touch pad programming with descriptive information regarding the set up, tuning and diagnostics of the system.The Power A Mark II™ is a system that can replace mechanical controls either on fully mechanical engines, or on fully electronical engines, or on engines with the combination of both characteristics.Technical Features: Single Lever/Dual Function and Dual Lever/Dual Function for shift, throttle and trolling Up to 4 control stations Power supply: min 9 max 32V Working temperature: -25°C to +75°C Control station functions:- Station Select- Engines Warm up- High idle- Docking- Engine synchronization- Trolling valve Electronic throttle outputs:- Voltage (double output 0 - 5V and 0 - 2,5V)- PWM (0-100%, frequency from 200Hz to 1kHz)- Current (4 - 10mA) Digital Throttle Output:- SAE J 1939- NMEA 2000 Trolling valve output- Voltage (0 - 5V)- PWM (0-100%, frequency from 100Hz to 1 kHz)- Current (4 - 20mA) Electric shift control: - 2 or 3 ON/OFF or proportional solenoids- Shift delays fully settable Safety Devices: Start in-gear PROTECTION(start inhibition with shifted gear) Audible and visual diagnostic failure alarm (READABLE MESSAGES ON THE CONTROL UNIT DISPLAY) Proportional shift delays Programmable working parameters Meets CEI EN 60945 standards EMC Certification and CE MARKConforms with: CEI EN60945 UNI-EN ISO 11547 COMPATIBILITY WITH ALL MECHANICAL THROTTLE ENGINESCOMPATIBILITY WITH ALL ELECTRONIC THROTTLE ENGINESCummins, Detroit Diesel, Scania, Iveco, FPT, Lombardini, VM Motori, FNM, Yanmar, CMD-Volkswagen, Hyundai ecc. The Power A Mark II™ electronic system actuators cannot be installed in those rooms where ignition-proof devices are required. Quick Guide (pdf)Brochure (pdf)

Read more less

M66 Fast Connect Rotary Steering CableSteering Helm: Ultraflex T71FC T72FC - T73NR FC T81FC - T82FC T83NR FC Teleflex Safe TQC/NFB Morse D290Ultraflex year 2001 and prior: T71 - T72 - T73NR T74NR - T81 - T82 T83NR - T84NR Length: 17 Feet Specifications: Cable Length (Feet): 17' Box Dimensions: 3"H x 18"W x 28"L WT: 8.55 lbs UPC: 702755017158

Read more less

Jack Plate Mounting Bolt KitBolt Kit for jack plate installation. For motors with standard BIA bolt pattern only. Not for Mini Manual Jack Plate. Contains: 4 x 3 1/2 x 1/2in SS Bolts 4 x 2 1/2 x 1/2in SS Bolts 8-1/2in Nylok Nuts Includes Flat Washers and Lock Washers

Read more less

Reversible Transom Wedges 5 Degrees - Aluminum FinishReversible wedges for either positive or negative trim. Machined billet units look great and will never crack like cheaper cast units from competitors!Offering 5 degrees of either negative or positive trim. In most cases, they are used to provide negative trim when your bow will not come down enough due to the angle of the motor (the transom is built without enough of a negative angle). This is a quick, cheap, and effective fix!Features: Sold as a pair (For 1 engine) 3″ is width 14″ total length Will need bolts that are 1.5″ longer for the ‘thicker side of the wedge ’ and 0.25 longer for the ‘thin side of the wedge'

Read more less

LED Jack Plate Gauge - BlackComplete gauge kit, sending unit, gauge, 24 feet of wiring. If additional wiring is required, please buy the extension kit, as cutting the wire and splicing will ruin the shielding and Warranty!! All of the Jack plates are pre-drilled for the gauge’s sending unit on the back; just line up the sending unit, attach with included hardware, and pull cable up to the gauge’s mounting location.Features: Jack Plate Lift Gauge Fits all Bob’s Jack plates Displays your jack plate's height in 1/4 inch increments Special photoelectric eye that precisely regulates the LED brightness 1-year warranty

Read more less

Reversible Transom Wedges 2 Degrees - Aluminum FinishReversible wedges for either positive or negative trim. Machined billet units, look great, and will never crack like cheaper cast units from competitors!Offering 2 degrees of either negative or positive trim. In most cases, they are used to provide negative trim, for when your bow will not come down enough due to the angle of the motor (transom is built without enough of a negative angle). This is a quick, cheap, and effective fix!Features: Sold as a pair (For 1 engine) 3″ is width 14″ total length Thickest part of wedge is .75″

Read more less

Marine Hull Mount Horn - BlackFeatures: For vessels under 12 meters (39.4 ft.) 12 or 24 volt DC system Built-in water evacuation drainage system Specifications: Color: Black Box Dimensions: 3"H x 4"W x 6"L WT: 0.32 lbs UPC: 601373542076

Read more less

Marine Hidden Horn - WhiteFeatures: 12 or 24 Volt DC Systems For vessels under 12M (39.4') Uses "SETS" Horn Technology Draws less than 1/2 Amp Unit is Polarity Protected Solid state with no moving parts Built-in water evacuation drainage system Requires 2-1/4" hole Mounting gasket included Specifications: Color: White Box Dimensions: 3"H x 6"W x 9"L WT: 0.35 lbs UPC: 601373540171

Read more less