High Water SensorThis High-Water Sensor is for The Marine Guardian, and it detects if there is water in the bilge above the sensors’ pre-set level and instantly sends an alert. (Want to automatically turn on your bilge? Consider upgrading to The Marine Guardian 2.0.)This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

Guardian Device with Global 2G-3G-4G LTE Cellular OnlyProtect a vessel with The Guardian. This device uses cellular only for near-shore monitoring. With The Guardian mobile app and real-time alerts, users will always be on top of their boat’s critical systems, security status, and the boat’s location.Boaters can share location tracking and monitoring with anyone, making it ideal for family members’ peace of mind or captains maintaining their vessel.Features: Hardwired to deliver industry-leading reliability and false alarm prevention 2G-3G-4G LTE cellular is available in 142 countries, including the Bahamas Real-time text alerts or voice calls when an event occurs Critical system monitoring—high water, battery voltage, and shore power status Infrared beam security protects valuable gear and electronics outside of the cabin Compact size for easy concealment Save money with insurance discounts Manage a Fleet or Boat ClubWith The Guardian, users can manage their fleet or boat club with ease and dependability. Get real-time alerts if someone leaves their defined service area, breaks a speed limit, or when they’re returning to port. View all boat locations in one map, save trip history for each boat, and more.Remote Monitoring/Notifications (with all the sensors included): Real-time battery voltage and low battery alert Battery disconnect/reconnect notification High water alert Cabin/hatch door alert Infrared alert Shore power disconnect alert Internal backup battery percentage Customizable zone and speed alerts The theft fence alerts to detect boat movement Two-minute breadcrumbs Remote security arm/disarm Set up multiple alert recipients Set up and track fleets Alerts sent via text, voice call, or email View multiple boats View trip history Specifications: Physical Dimensions of Device: 6.5 in x 5.0 in x 2.0 in Certifications: Verizon, ATT, Iridium, FCC, LE, IC Operating Voltage: 7 – 12 VDC Backup Battery Type: 7000mAh Lithium Polymer Connectivity IGSM: 2G-3G-4G LTE Global Inputs: 4 Outputs: 1 G.P.S/G.S.M. Antenna: Internal Includes: (1) Harness (1) LED indicator (1) 125 dBA waterproof siren with vent kit  (1) Magnetic door capsule (white) (1) LED light (red) This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

White Strobe LightAn accessory for The Marine Guardian's siren, this strobe light features multiple flash patterns. The strong light distribution provides optimal dispersion and intensity.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

Flush Mount Magnet SensorAs part of The Marine Guardian’s 3 layers of security, attach this flush mount sensor to an entry door, hatch, or even the engine cowling. The flush-mount sensor is designed for concealed installation.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

Guardian Device Package with Global 2G-3G-4G LTE Cellular & 2-Way Iridium Satellite Messaging - Sensors IncludedTMG 2.0 supports 6 sensors and 4 outputs to control connected systems. This device has combined global cellular and 2-way Iridium satellite communication, allowing users to monitor and control connected devices anywhere, anytime.The power resides in its proprietary technology built for the harsh marine environment, the 2-way global Iridium satellite communication, advanced security and monitoring capabilities, and its hardwired installation.When boaters need rock-solid reliability that’s capable of tracking, monitoring, and controlling systems no matter where their vessel is on the planet, they turn to The Marine Guardian's trusted solution that some of the best offshore boat builders in the world rely on. Features: Hardwired to deliver industry-leading reliability and false alarm prevention 3G/4G LTE global cellular 2-way Iridium Satellite for true 100% low-latency global coverage means monitoring when beyond cellular range Two-minute breadcrumbs Real-time text alerts or voice calls when an event occurs  Critical system monitoring—high water, battery voltage, and shore power status Infrared beam security protects valuable gear and electronics outside of the cabin Compact size for easy concealment Save money with insurance discounts Manage a Fleet or Boat ClubWith The Guardian, users can manage their fleet or boat club with ease and dependability. Get real-time alerts if someone leaves their defined service area, breaks a speed limit, or when they’re returning to port. View all boat locations in one map, save trip history for each boat, and more.Remote Monitoring/Notifications: Real-time battery voltage and low battery alert Battery disconnect/reconnect notification High water alert Cabin/hatch door alert Infrared alert Shore power disconnect alert Internal backup battery percentage Customizable zone and speed alerts The theft fence alerts to detect boat movement Two-minute breadcrumbs Remote security arm/disarm Set up multiple alert recipients Set up and track fleets Alerts sent via text, voice call, or email View multiple boats View trip history Specifications: Physical Dimensions of Device: 6.5 in x 5.0 in x 2.0 in Certifications: Verizon, ATT, Iridium, FCC, LE, IC Operating Voltage: 7 – 12 VDC Backup Battery Type: 7000mAh Lithium Polymer Connectivity IGSM: 2G-3G-4G LTE Global Inputs: 6 Outputs: 4 G.P.S/G.S.M. Antenna: Internal Satellite Antenna: External Includes: (1) External Iridium satellite antenna (1) Harness  (1) LED indicator (1) 125 dBA waterproof siren with vent kit (1) magnetic door capsule (white) (1) LED light (red) (1) High water sensor (1) 110V shore power sensor (1) Single-beam infrared sensor  (1) White strobe light This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

3/4" Riser Kit for Sea Swivel XL MountPrecision cut CNC machined 3/4-in starboard riser to clear toe kicks, nav lights, cleats, etc...Includes: (1) White 3/4" 10x10" King Starboard Riser

Read more less

101XDS Short Extreme Duty Actuator - 12V - 2-1/4" Stroke with Mounting HardwareThe 101 XDS Actuator is used with OEM specific kits and limited space applications. It is the shortest actuator manufactured. 2.25 stroke and overal length (tip to tip) is 10 7/8 inches.    Instant response electric actuators are made of high impact glass fiber filled, ultraviolet-resistant nylon material with 316 super buff stainless steel tubing.Specifications: Newly implemented Anti Extrusion Ring (AXR) seal stabilization system. Stronger top cap and mounting clevis design Improved pressure-tight torx screws Integrated wiper seal at actuator base Molded-in brass thrust bearing design Thicker and stronger motor housing wall Improved O-Ring design for more consistent seal Over-molded cable providing a stronger tighter seal Upper mounting bracket with gland seal Features: Lenco's ballscrew design is more reliable and twice as powerful compared to typical hydraulics Lenco's tough, high-torque actuator motor easily pushes 500 pounds. Lenco Actuator connections use waterproof "Plug & Play" Deutsch connectors eliminating the possibility of water intrusion. 12 Volt 5/16" mounting hardware 6 foot cable WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Quick Guide (pdf)

Read more less

101 Actuator- 24 Volt- 2-1/4  Stroke with Mounting HardwareThe 101 Actuator is used in all Standard, Edge Mount and Standard Performance kits. 2.25 stroke. Overall length (tip to top) is 12.5 inches.  Instant response electric actuators are made of high impact glass fiber filled, ultraviolet-resistant nylon material with 316 super buff stainless steel tubing.Specifications: Newly implemented Anti Extrusion Ring (AXR) seal stabilization system. Stronger top cap and mounting clevis design Improved pressure-tight torx screws Integrated wiper seal at actuator base Molded-in brass thrust bearing design Thicker and stronger motor housing wall Improved O-Ring design for more consistent seal Over-molded cable providing a stronger tighter seal Upper mounting bracket with gland seal Features: Lenco's ballscrew design is more reliable and twice as powerful compared to typical hydraulics Lenco's tough, high-torque actuator motor easily pushes 500 pounds. Lenco Actuator connections use waterproof "Plug & Play" Deutsch connectors eliminating the possibility of water intrusion. 24 Volt 5/16" mounting hardware 6 foot cable WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Quick Guide (pdf)

Read more less

Bennett RetroFit KitWe make the best boats better!™Lenco Marine Electric RetroFit Kit for Bennett Trim TabsUpgrade your boat with the latest trim tab technology - trouble-free, high performance Lenco electric actuators. Easy installation: Use existing Bennett trim planes, lower bracket and switch Use all existing mounting holes Lenco RetroFit Kit includes: 2 electric actuators 2 upper mounting brackets Switch wiring kit All mounting hardware Features: Lenco wire feeds through existing oil line hole in transom Lenco upper mounting bracket fits existing Bennett mounting holes Existing Bennett trim tab plane and hinge Existing Bennett lower bracket Just 4 Simple Steps: Remove Bennett actuators, and install Lenco upper mounting brackets on transom Feed Lenco wires through holes in brackets and through existing oil line holes in transom Mount Lenco actuators on to new upper brackets and existing Bennett lower brackets Connect Lenco actuator wires to existing harness. WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

Impact resistant, fiberglass reinforced nylon cylinders eliminates expansion and resists ultra-violet rays. Two expanding type seals, plus O-ring, eliminates high and low pressure leaks. Barbed cylinder fitting and an inserted tubular rod prevents hose blow-off and breakage.Cylinder is 7 1/2 inches eye to eye when closed.

Read more less

LED Indicator Integrated Tactile Switch Kit with Pigtail for Dual Actuator SystemsComplete your Lenco trim tab system with the latest, maintenance-free (ALL-IN-ONE) integrated tactile switch kit design. This NEW switch technology improves accuracy and integrates the control box functionality into the key pad bezel.LED indicator lights let you know exactly where your trim tabs are at all times. A backlit keypad automatically illuminates graphics for night viewing. A photo eye reads ambient light and adjusts the indicator intensity for optimum viewing in all lighting conditions.Features Include Simple, quick, Plug & Play installation Instant response Built-in retractor Low profile design Self-contained key pad with waterproof Plug & Play Deutsch connectors Wiring harness length 30" (76.2 cm) from the back of the switch bezel 36" power pigtail 2 1/16" hole cut-out size, overall key pad size of 2.75" x 2.75" 4.08" clearance required from the back of the key pad's mounting location 2 high-intensity LED Indicator displays show the exact position of your trim tabs at all times Photo Eye for optimum viewing in all light conditions Backlit key pad for optimum viewing at night Replacement parts are available and are sold separately. Specifications 3 Year Warranty System Type:Dual Actuator Compliance:CE Certified WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Brochure (pdf)

Read more less

Edge MountMounts the actuator at the trailing edge of the plane, requiring 4" less transom height than standard mountTrim tabs make the single most important difference in the way your boat rides and performs. They are optional on some boats but should be as standard as power trim and tilt. Lenco trim tabs make your boat ride smoother, drier, faster and with increased safety whether on a small skiff or a mega-yacht. Lenco's ballscrew design is more reliable, three times more powerful and features an instant response, which makes them very user friendly compared to typical hydraulics. We also like being oil-free and environmentally conscious. Instant response electric actuators for precise control Everything is fully submersible, maintenance-free and sealed for life Self-locking ballscrew will not drift, even while backing down 12-gauge laser cut stainless steel trim tab planes High-impact corrosion-proof mounts look great through years of abuse Clean, time and space-saving installation Actuators have high-impact, 50% glass fiber-filled, ultraviolet-resistant nylon case 316 super buff stainless steel rams Tactile Switch w/ Indicator LED for all Single Actuator Trim Tab SystemsFeatures: Self-contained, sealed keypad Self-contained, sealed control box module Fade/smudge-proof, laser engraved graphics Plug & play switch wiring harness connector Includes 36" power pigtail for control box 2" hole cut-out size, overall size 2.75" x 2.75" Built-in retract feature returns tabs to a fully retracted position when power is removed 2 high-intensity L.E.D. indicator displays show the exact position of our trim tabs at all times Photo eye reads ambient light and adjusts the L.E.D. indicator display intensity for optimum viewing in direct sunlight 12 & 24-volt compatibility Includes Self-Check Feature Each Kit Includes: Tactile LED Indicator Switch Kit 2 Actuators with 6' lead & Deutsch Plugs 2 20' Actuator Extension Wiring Harness 2 12 gauge Stainless steel trim tab planes 2 Upper Mounting Bracket with Gland Seal 2 Lower Mounting Bracket All stainless steel mounting hardware WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Brochure (pdf)

Read more less

12" x 9" Edge Mount Trim Tab Kit without Switch Kit -12V Lenco Electric Edge Mount Trim Tab Kits make your boat ride smoother, dryer, faster and with increased safety whether on a small skiff or a large yacht. The Lenco ball screw design is more reliable, three times more powerful and features an instant response, which makes them very user friendly compared to typical hydraulics. Lenco fast response electric actuators are fully submersible with all plug & play waterproof Deutsch connections. Edge Mount actuators mount at the trailing edge of the plane, requiring 4" (10.16 cm) less transom height than Lenco standard mount trim tabs.Kit Contents: 2 each of 12-gauge stainless steel trim tab blades 2 each of #15054-001 actuator with 6' leads & Deutsch plugs 2 each of #30133-103 20' actuator extension wiring harnesses 2 each of #15085-001 (116) upper mounting brackets with gland seal 2 each of #50014-001 (119) lower mounting brackets 1 each of the Lenco owner’s / installation manual All necessary stainless steel mounting hardware Specifications: Suggested Boat Length: 14' to 18' Length of Tab: 12" Width of Tab: 9" Hinge Height: 2" Minimum Transom Height: 11" Blades: 12 Gauge Stainless Steel Finish: Smooth Switch Kit: Sold Separately Class: Fuel Efficient Compliance: CE Certified Compatibility: Any Boat Actuators: 12-volt WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Brochure (pdf)

Read more less

18" x 14" Standard Performance Trim Tab Kit w/o Switch Kit- 12VUpgraded electro-polished trim blades with stouter 1/4" diameter hinge pin make these Performance Trim Tab Kits a cut above the base level Lenco Standard Mount Kits. Equipped with the same fast response electric actuators for precise control. Fully submersible with all Plug & Play Deutsch connections. Blades are Electro-Polished 12 gauge - 304 SS with 1" turned up edges (the 16" x 12" and the 18" x 14" have an 85 degree inside taper) and 1/4" diameter hinge pin. Kit includes Standard Actuators with 5/16" SS bolts. The actuators mount at the trailing edge of the bladesKit Contents: 2 each of 12-gauge stainless steel Electro-Polished trim tab blades 2 each of #15054-001 actuators with 6' lead and Deutsch plugs 2 each of #30133-103 20' actuator extension wiring harnesses 2 each of #15085-001 (#116) upper mounting bracket with gland seal    2 each of #50014-001 (#119) lower mounting bracket  1 each of the Lenco owner’s / installation manual All necessary stainless steel mounting hardware Specifications: Suggested Boat Length: 22' to 40' Length of Tab: 18" Width of Tab: 14" Minimum Transom Height: 11" Blades: 12 Gauge Stainless Steel Finish: Electro-Polished Switch Kit: Sold Separately Class: Fuel Efficient Compliance: CE Certified Compatibility: Any Boat Actuators: 12-volt WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Brochure (pdf)

Read more less

Bracket Mounting Disks - Quantity 6An aluminum backing support for a trolling motor mount is a 2-in. diameter disk made of 1/2 in. thick 6061-grade aluminum. The backing support is designed to provide additional reinforcement to the mounting area of the boat where the trolling motor is attached. Benefits of Using Mounting Disks: Load Distribution: Multiple backing supports can distribute the load over a wider area compared to a single backing plate Flexibility: Using multiple backing supports allows for more flexibility in positioning and alignment Accessibility:  Using multiple backing supports can make it easier to maneuver and install the components in tight spaces, as you can insert them one by one and secure them individually *When using these backing disks, it is important to always have a fender washer between the disk and the lock nut. These disks are designed to work with 1/4-20 Phil flat machine screws. Sea Brackets recommends using machine screws with coarse threads.

Read more less

Replacement LED Key Pad f/15270-001 & 15271-001Replacement LED Tactile Switch Key PadWARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Brochure (pdf)

Read more less

Heavy Duty Performance Trim TabsFast response electric actuators for precise control. Fully submersible. All Plug & Play Deutsch connections. Blades are Electro-Polished 12 Gauge - 304 SS with 1" turned up edges, 85 degree inside taper, and 1/4" diameter hinge pin. Extreme Duty actuators with 5/16" SS bolts. Kit is factory assembled with full transom back plate, mechanical strain relief cable seal, adjustable C-channel mounting brackets, and 3.75" sacrificial anodes.We make the best boats better!™Running wide open in rough seas isn't for the faint of heart. Aggressive boating requires durable boat accessories. Lenco's HD series of trim tabs are built to handle whatever you or Mother Nature might throw at them. Everything about your boat is designed to go hard and fast. Why should your trim tab system be any different? All stainless steel construction (no dissimilar metals), Electro-Polished Blades for long lasting good looks Actuator speed is precise and controllable so there are no surprises at top speeds Models have massive backplates and adjustable mounting channels with thru-bolted actuators for the ultimate in strength and reliability Models use solid stainless steel billet rams that are chemically polished for unsurpassed durability Actuators Instant response Fully submersible, maintenance-free and sealed for life High-impact, 50% glass fiber-filled, ultraviolet-resistant nylon case 5/16" stainless steel bolts Tactile Switch w/ Indicator LED for all Single Actuator Trim Tab SystemsFeatures: Self-contained, sealed keypad Self-contained, sealed control box module Fade/smudge-proof, laser engraved graphics Plug & play switch wiring harness connector Includes 36" power pigtail for control box 2" hole cut-out size, overall size 2.75" x 2.75" Built-in retract feature returns tabs to a fully retracted position when power is removed 2 high-intensity L.E.D. indicator displays show the exact position of our trim tabs at all times Photo eye reads ambient light and adjusts the L.E.D. indicator display intensity for optimum viewing in direct sunlight 12 & 24-volt compatibility Includes Self-Check Feature Each kit contains: Tactile LED Indicator Switch Kit 2 actuators wth 6' Lead and Deutsch Plugs 2 12 Gauge SS Electro-Polished trim tab planes 2 20' Actuator Extension Wiring Harnesses Boat-Mounting Hardware supplied by customer WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Brochure (pdf)

Read more less

Deluxe Stainless Steel Wiper Blade - 14" - Black Powder CoatedThis deluxe stainless steel blade is black powder-coated with a natural rubber blade. It also has replaceable blade inserts that are packed with three adapters to fit Schmitt Marine's Ongaro Deluxe Arms and most competitive arms. Specifications:Length: 14 in.

Read more less

Power Bimini Replacement Canvas - BurgundyIs it time to replace your Power Bimini top? This bimini replacement canvas will make your pontoon boat look brand new for the upcoming boating season. Made with a tough and durable marine-grade fabric, it will hold up against the elements including harsh UV rays. This canvas is prepped with a zippered pouch that attaches to the Bimini Extension.Features: Burgundy colored canvas Prepped with zippered pouch to store Bimini Extension Canvas (sold separately) For Pontoon Boats Marine-grade fabric Withstands the harsh marine elements Bimini extension attaches to Power Bimini frame (Bimini Extension sold separately) Unzip, unravel, and install Specifications: Quantity In Package: 1 Bimini Style Power: Hardwired *Replacement canvas only

Read more less

ATLAS™ 14" Set Back Hydraulic Jack Plate PolishedRated for engines up to 300hp or up to 625 pounds dry weight.5 REASONS YOU SHOULD CHOOSE THE ATLAS™ HYDRAULIC JACK PLATE ATLAS™ is truly the best hydraulic jack plate in the world ATLAS™ is factory installed by more boat manufacturers than any other plate ATLAS™ is used by more professional fisherman than any other hydraulic jack plate ATLAS™ is the #1 selling hydraulic plate in the world – sold & serviced by more outlets ATLAS™ hydraulic actuator is made in the U.S.A. vs. our competitors being from China 6 WAYS THE ATLAS™ CHANGED HYDRAULIC JACK PLATES FOREVER ATLAS™ is made by T-H Marine/CMC, who were the FIRST to offer an actuator inside the jack plate – the competition copied ATLAS™ was the first plate to offer predrilling for shallow water anchors – the competition copied ATLAS™ was the first and only plate that did not require regular grease lubrication – the competition design cannot do that ATLAS™ was the first plate to include a heavy duty safety cable to protect boaters from engine entering cockpit upon failure ATLAS™ was the first plate to offer a very simple actuator replacement in the field ATLAS™ was the first major development in hydraulic jack plates in over a decade – spurring hydraulic jack plate improvement WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Actuator Extension Harness - 7' - 16 Awg 7' Deutsch-Connected Extension 16 Awg Abyc Compliant WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

Actuator Extension Harness - 32' - 12 Awg 32' Deutsch-Connected Extension 12 Awg Abyc Compliant WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

101XDS Short Extreme Duty Actuator - 12V - 2-1/4" Stroke with Mounting HardwareThe 101 XDS Actuator is used with OEM specific kits and limited space applications. It is the shortest actuator manufactured. 2.25 stroke and overal length (tip to tip) is 10 7/8 inches.    Instant response electric actuators are made of high impact glass fiber filled, ultraviolet-resistant nylon material with 316 super buff stainless steel tubing.Specifications: Newly implemented Anti Extrusion Ring (AXR) seal stabilization system. Stronger top cap and mounting clevis design Improved pressure-tight torx screws Integrated wiper seal at actuator base Molded-in brass thrust bearing design Thicker and stronger motor housing wall Improved O-Ring design for more consistent seal Over-molded cable providing a stronger tighter seal Upper mounting bracket with gland seal Features: Lenco's ballscrew design is more reliable and twice as powerful compared to typical hydraulics Lenco's tough, high-torque actuator motor easily pushes 500 pounds. Lenco Actuator connections use waterproof "Plug & Play" Deutsch connectors eliminating the possibility of water intrusion. 12 Volt 3/8" mounting hardware 6 foot cable WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Quick Guide (pdf)

Read more less

Standard 9" x 9" Single - 12 Gauge Replacement Blade Gauge: 12 Anode:No Back Plate:No WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

Bimini Extension for Power Bimini -7' Chrome Hardware with Black CanvasMore shade! The SureShade Extension allows boaters to enjoy additional protection on their pontoon boat when docked or anchored. The bimini extension adds shade in the front of the boat where exposure is greater. This extension bimini offers more protection than traditional biminis. Don’t let the sun or rain interrupt your day on the boat.SureShade is making your boating experience easier with this extension bimini that attaches to the SureShade Power Bimini. The kit includes the bimini, stanchion poles with straps, and mounting hardware. It is important to note that you must permanently affix locking plates on the top rails of your pontoon boat for the extension bimini. It easily attaches to the SureShade Power Bimini.Features: Attaches to Power Bimini Powerful Protection - The bimini extension offers more coverage at the bow of the boat, where exposure is the greatest  Bimini Kit - The bimini extension kit includes bimini, stanchion poles, and mounting hardware for easy installation Increase shade at the bow of your pontoon boat with the SureShade® Bimini Extension Have you always wanted additional shade on your pontoon boat? Now you can with the SureShade SuperShade Bimini Extension Kit. This extension bimini works with the SureShade Power Bimini giving you additional shade in the bow of the boat that is not covered by traditional biminis. The kit includes everything you need to enjoy shade whether you’re staying at the dock or the sandbar. Please do not use the extension when underway.How it WorksBoaters like how easy it is to attach this extension bimini to the SureShade Power Bimini and that they can easily store this extension bimini in the SureShade Power Bimini zippered compartment. It is important to note that you must permanently affix locking plates on the top rails of your pontoon boat for the extension bimini. The bimini extension measures 92″ W x 91″ L when fully extended.Relax, SureShade has you covered!

Read more less

Bimini Extension for Power Bimini -7' Chrome Hardware with Light Sand CanvasMore shade! The SureShade Extension allows boaters to enjoy additional protection on their pontoon boat when docked or anchored. The bimini extension adds shade in the front of the boat where exposure is greater. This extension bimini offers more protection than traditional biminis. Don’t let the sun or rain interrupt your day on the boat.SureShade is making your boating experience easier with this extension bimini that attaches to the SureShade Power Bimini. The kit includes the bimini, stanchion poles with straps, and mounting hardware. It is important to note that you must permanently affix locking plates on the top rails of your pontoon boat for the extension bimini. It easily attaches to the SureShade Power Bimini.Features: Attaches to Power Bimini Powerful Protection - The bimini extension offers more coverage at the bow of the boat, where exposure is the greatest  Bimini Kit - The bimini extension kit includes bimini, stanchion poles, and mounting hardware for easy installation Increase shade at the bow of your pontoon boat with the SureShade® Bimini Extension Have you always wanted additional shade on your pontoon boat? Now you can with the SureShade SuperShade Bimini Extension Kit. This extension bimini works with the SureShade Power Bimini giving you additional shade in the bow of the boat that is not covered by traditional biminis. The kit includes everything you need to enjoy shade whether you’re staying at the dock or the sandbar. Please do not use the extension when underway.How it WorksBoaters like how easy it is to attach this extension bimini to the SureShade Power Bimini and that they can easily store this extension bimini in the SureShade Power Bimini zippered compartment. It is important to note that you must permanently affix locking plates on the top rails of your pontoon boat for the extension bimini. The bimini extension measures 92″ W x 91″ L when fully extended.Relax, SureShade has you covered!

Read more less

Power Bimini Replacement Canvas - BeigeIs it time to replace your Power Bimini top? This bimini replacement canvas will make your pontoon boat look brand new for the upcoming boating season. Made with a tough and durable marine-grade fabric, it will hold up against the elements including harsh UV rays. This canvas is prepped with a zippered pouch that attaches to the Bimini Extension.Features: Beige colored canvas Prepped with zippered pouch to store Bimini Extension Canvas (sold separately) For Pontoon Boats Marine-grade fabric Withstands the harsh marine elements Bimini extension attaches to Power Bimini frame (Bimini Extension sold separately) Unzip, unravel, and install Specifications: Quantity In Package: 1 Bimini Style Power: Hardwired *Replacement canvas only

Read more less

Replacement Blade for Chinook with Rocker Switch - WhiteReplacement Blade specifically for Chinook with Rocker Switch.Color: White

Read more less

Replacement Blade for Ultimate 747 & 757 - BlackReplacement Blade specifically for Ultimate 747/757.Color: Black

Read more less

Replacement Blade for Sirocco - WhiteReplacement Blade specifically for Sirocco.Color: White

Read more less

Ultrasonic Wind & Weather AntennaMaretron's outdoor weather station measures wind speed and direction, air temperature, barometric pressure, and relative humidity. The wind measurement is performed using ultrasonic sensors, which means there are no moving parts to wear out or get caught in the rigging.The WSO200 accurately measures wind speed and direction under a tilt of up to 30°, making it ideal for sail as well as power conditions.When used with Maretron's SSC300 compass and a display such as Maretron's N2KView® vessel monitoring system, or Maretron's DSM570 color graphics displays, the user will be able to view both apparent and true wind speed and direction as well as dew point and wind chill factor.The WSO200 mounts on a 1"-14 Standard Marine Mount. The WSO200 is NMEA2000 * Cables sold separately Features: Apparent wind speed Apparent wind direction Atmospheric pressure Air temperature Relative humidity

Read more less

Cut & Finish Wool Polishing Pad for Rotary Use with Polishers LH19E 180mmThe CUT & FINISH Rotary Wool Polishing Pads represent a significant leap forward in rotary pad technology, offering versatility for detailers, body shop technicians, and other applications where rotary polishes are frequently used. These pads utilize only the highest-quality, genuine merino wool fibers, refined to a consistent 20mm length and assembled in an extremely dense pattern onto a specially designed foam interface.The CUT & FINISH Pads provide an optimized balance, an exceptional cut, and a better finish than any wool rotary pad available on the market today. The unique design allows the operator to manipulate the pad in several applications and contour to panel shapes.RUPES CUT & FINISH Wool Pads are compatible with virtually all rotary-style polishers, but perform best with a low speed and high torque tool like the BigFoot LH19E. Specifications: Type: Buffers & pads Box Dimensions: 1"H x 6"W x 6"L WT: 0.02 lbs UPC: 8058341049747 Quick Guide (pdf)

Read more less

5/8" Type A2 Fuel & Vent Line Hose - Black - Sold by the FootTrident 5/8” A2 Fuel Hose for gasoline vent hose (including ethanol blends) and diesel (including bio diesel blends). This hose is built with the best fuel, fire and age resistant formulation.Features: Sold by the foot Provides extraordinary resistance to aging, fire, heat, cold, and the ozone  Also provides excellent bend-ability NMMA Type Accepted & CE certified Applications: Fuel Hose for vent and diesel distribution  For all marine fuels including gasoline, alcohol blends, diesel and bio-diesel Construction: Tube: Nylon Internal Barrier, NBR  Cover: NBR/PVC Blend  Reinforcement: Polyester 2 spiral  Temperature Range: -20°F to 212°F (-28ºC to 100ºC) Specifications: Inner Diameter: (inch) 5/8" / (mm) 15.9 Outer Diameter: (inch) 0.960 / (mm) 24.4 Burst Pressure: (psi) 200 / (mpa) 1.38 Working Pressure: (psi) 50 / (mpa) 0.34 Bend Radius: (inch) 3" / (mm) 76.2 Weight: (lb/100 ft.) 25.84 / (kg/m) 11.72 *The #317 series exceeds ABYC H-24 & H-33, SAE J1527, ISO 7840, & USCG Type A2This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: ID Diameter (inches): 5/8" Length (Feet): Sold By The Foot Box Dimensions: 1"H x 1"W x 1"L WT: 0.27 lbs Quick Guide (pdf)

Read more less

Pressure Sender 80 PSI 1/4-18 NPT Features: Ground - Standard Connection - Knurled Nut Voltage - 6-24V Thread - 1/8-27 NPTF Max. Pressure Range - 80 PSI / 5 bar (10-180Ohm) *Sold as an IndividualWARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Color: Silver Box Dimensions: 2"H x 2"W x 5"L WT: 0.25 lbs UPC: 754059004679

Read more less

52MM (2-1/16") ViewLine Trim Indicator Gauge Up/Down - Black Dial & Round BezelVeratron ViewLine offers a comprehensive modular, modern series of instruments for engine monitoring.More functions and greater flexibility in installation and design increase the scope for high manufacturing standards and guarantee the highest level of reliability and readability. As the result of ongoing research and development work, we offer an innovative comprehensive standard instrumentation platform which is also available for outboard engine use.  ViewLine provides maximum freedom to customize the cockpit and is the natural choice for an attractive price/performance ratio.The ViewLine 52 mm Gauges are available in black or white dial versions, which are always completed with a round bezel in identical color. Interchangeable bezel option.Features: 8 pole Tyco/Hirschmann MQS plug  Red LED Via Plus And Min Warning Light Operating voltage 8–32 V  Input signal: standard Ω values  Optional make-point switch can be connected  Reverse polarity protection  Anti-fog double lens  Front side protection rating IP67  52 mm installation diameter  50 mm installation depth  In the Box: Gauge Connection Cable Bezel Rubber Seal Spinlock Installation Instructions Safety Instructions *Sold as an IndividualThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Series: ViewLine Gauge Type: Trim Guage Gauge Size: 2-1/16" Box Set: No Voltage - Input Range (Volts): 12/24 V Box Dimensions: 3"H x 3"W x 4"L WT: 0.35 lbs UPC: 7640178723085 Owner's Manual (pdf)

Read more less

AT-850 Square Mixing Tip 4" - Case of 50Weld Mount's AT-850 tip is for use only with the 2010, 4010, & 8040 adhesives. It's unique design eliminates any possibility of the cartridge plugging up as the entry is separated.Features: Square Mixing Tip 4" Long Case of 50

Read more less

Extra Large Stainless Steel Flush Cupholder Features: Longer depth fits larger water bottles and can coolers (including Yeti) Flush mount design Drink pad made with UV-resistant vinyl for longer life Drink pad cushions a beverage Vinyl pad affixed without adhesive Includes Thick Mounting tap & 3/8" drain tube Holds Stanley-style drink cups up to 30 oz Specifications: Cut Out: 3-5/16" Outer Diameter: 4-5/8" Depth: 6-7/8" Material: Stainless Steel

Read more less

Marine Ultimate Vinyl Boat Seat Care KitThe Complete Process to Treat and Prevent Mold & Mildew on Vinyl Boat Seats! Say goodbye to mold and mildew on your boat! The Xanigo Marine Ultimate Vinyl Boat Seat Care Kit is here to save the day. This kit includes everything you need to remove and prevent unsightly mold and mildew on your vinyl boat seats, life jackets, canvas, bumpers, carpets, and other areas with high moisture.Three Solutions | Four Easy Steps: Step 1 Remove: Simply spray a generous amount of the Mold & Mildew Stain Remover onto the affected area and let it soak for 60-90 seconds. Agitate the area with a stiff brush to remove the mold from the pores and let the product do its job, leaving behind a clean, like-new, seat! Thoroughly rinse away the residue with fresh water. Don't forget, no direct sunlight! Repeat if necessary. Step 2 Neutralize: Spray the Waterless Wash onto your seats and wipe it in with a microfiber cloth to neutralize the chemicals in the remover and prime the surface for the Mold & Mildew Preventer to bond to. That's it! Step 3 Prevent: Simply spray the Mold & Mildew Preventer onto a clean, dry surface and spread it evenly with a microfiber towel. That's it! With just one application, your boat will be protected against mold and mildew for up to 90 days. No wiping is required! Step 4 Maintain: Spray the Waterless Wash and wipe it down with a microfiber towel to clean away grime and sunscreen from your seats, all while enhancing the protective layer created by the Mold & Mildew Preventer. Do this every time you use your boat to keep it clean, fresh, and mold-free! What's Included? (1) 16 oz. bottle of Mold & Mildew Stain Remover (1) 32 oz. bottle of Mold & Mildew Preventer (1) 32 oz. bottle of Waterless Wash Brochure (pdf)

Read more less

90° P-Trap Fuel Tank Vent - Black with Stainless Steel Trim CoverComposite 90-degree P-trap fuel tank vent 66419-3. These vents help prevent water from entering the fuel tank, yet allow air to vent freely, during normal sea conditions and washdowns.  This eliminates the need for an anti-siphon loop in the vent hose.  Features: For 5/8" I.D. hose (inch) 3/4" install. hole size (inch) 9/16" max. hull thickness Vents air from your boat's fuel tank as you fill the fuel tank Splash-resistant, corrosion resistant Meets ABYC standard *Compatible with Ethanol blended fuels Quick Guide (pdf)

Read more less

Temp Sender - 1/2" American Single StandardFeatures: The universal sending unit for most gauges and instruments Temp Sender, 1/2" American Single Standard This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

Chesapeake Black 5" Multifunction GaugePerimeter-lighted black dial with stylish blue and white graphics, polished stainless steel bezel, contoured White pointer, and domed glass lens. 5" - Hole size: 4.375" (112mm) Multi-Function Gauge Displays: Fuel (E-1/2-F) Voltmeter (10 - 18 VDC) Oil Pressure (0 - 80 PSI) Water Temperature (120 - 220° F) 4" - Hole size: 3.375" (85mm)Specifications: Anti-scratch glass lens Perimeter lighted back light 12 VDC negative ground Can be adapted for 24 VDC systems  Factory P/N GF4005*Sold as an Individual**Gauge Cover not IncludedThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Box Set: No Gauge Size: 5" Voltage - Input Range (Volts): 12/24 V Gauge Type: Multifunction Series: Chesapeake Black Box Dimensions: 8"H x 8"W x 8"L WT: 1.6 lbs UPC: 759266337626

Read more less

Euro White Boxed Set - Outboard MotorsPerimeter-lighted White dial with bold Black graphics, Black aluminum bezel, contoured Black pointer, and flat glass lens. Packaged and ready for the display counter.  This 4 Gauge Boxed Set offers a complete set of gauges ready to install. Outboard Motors Boxed Set Includes: Speedometer (55 MPH) (Mechanical) Tachometer (7000 RPM) Fuel Level (E-1/2-F) Voltmeter (10-16 VDC) Factory P/N KT9795 *Sold as a Box Set **Gauge Covers not Included This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Gauge Type: Box Set Series: Euro White Voltage - Input Range (Volts): 12/24 V Box Set: Yes Box Dimensions: 7"H x 10"W x 21"L WT: 4.4 lbs UPC: 759266097957

Read more less

50A 125V/250V CordsetEEL ShorePower CordsetsOne Hand. A simple twist. Full Power.The EEL (Easily Engaged Lock) ShorePower Cordset has an industry first, jaw-clamp design providing one-handed operation and a secure waterproof seal which completely eliminates the need for a locking ring. The EEL connection is built for the harshest environments and is UL approved. This easy-to-use cordset features a built-in cord light which serves as an alert to boaters when the cord is left plugged in. And, best of all, it works with your current inlet. In addition to cordsets with the EEL System, Marinco also has a full set of Pigtail and Y adapters all using the new EEL technology.Features: Designed for use with standard inlets (NEMA)50A, 125V/250V capacities; 25' length Cord sets meet global industry standards including ABYC and UL New wing-clamp technology provides a true, watertight connection every time Single-handed operation Eliminates the need for a sealing ring Secondary locking feature for added security Built-in LED cord light guides you to a secure connection every time, even in the dark WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Voltage: 125/250v Type: Cordset Length: 25' Amperage: 50a Box Dimensions: 6"H x 17"W x 19"L WT: 24.9 lbs UPC: 093344051739 Owner's Manual (pdf)

Read more less

50Amp 125V/250V InletsStainless Steel Power Inlet w/o Rear Safety EnclosureMarinco® Power InletsEasy Lock™ - Marinco's exclusive Easy Lock™ System has been designed to make hook-up quick and easy. Just connect the cordset (with an Easy Lock™ locking ring installed) to the inlet and turn the locking ring less than a quarter turn. The tabs on the locking ring lock into the inlet for a positive watertight hook-up while eliminating any chance of cross threading. The locking ring features lock locators positioned at 180° to improve finger grip during attachment. Easy Lock™ inlets have a threaded boss that will accept threaded cordsets as well. The Easy Lock™ system is a standard feature on some Marinco® 30 amp and 50 amp inlets and cordsets. The covers on all Marinco® inlets are designed to stay hinged open when the cover is lifted up. This allows the boater to connect their shore power cord while the cover remains open and out of the way. A soft touch unlocks it for closing.Blades are nickel plated brass for maximum corrosion resistance. Interior hardware is marine-grade stainless steel. WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Inlets Voltage: 125/250v Amperage: 50a Box Dimensions: 5"H x 6"W x 9"L WT: 1.3 lbs UPC: 093344007736 Quick Guide (pdf)Owner's Manual (pdf)Brochure (pdf)

Read more less

30A 125V Male Plug & CoverThe 305CRPN.VPK 30A 125V locking blade male shore power plug features corrosion resistant contacts and terminals. A weather resistant cover is included for added protection in harsh environments. The plug body is made of yellow nylon with a ribbed design for secure grip.WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Plugs Box Dimensions: 3"H x 5"W x 8"L WT: 0.6 lbs UPC: 093344305092

Read more less

Shaft AnodeMaterial: ZincOuter Diameter: 2.14"Inner Diameter: 0.87"Height: 2.02"Weight: 0.97lbsHoles: 2 Specifications: Material: Zinc Box Dimensions: 2"H x 2"W x 2"L WT: 1 lbs UPC: 8059617812188 Quick Guide (pdf)Owner's Manual (pdf)Brochure (pdf)

Read more less

TEC-DIVERS Plate AnodePlates for HullsMaterial: MagnesiumLength: 12.01"Width: 5.98"Height: 0.51"Weight: 2.76lbs Specifications: Material: Magnesium Box Dimensions: 1"H x 6"W x 12"L WT: 2.7 lbs UPC: 8059617816759 Quick Guide (pdf)Owner's Manual (pdf)

Read more less

Shaft AnodeMaterial: ZincOuter Diameter: 2.14"Inner Diameter: 1"Height: 2.02"Weight: 0.88lbsHoles: 2 Specifications: Material: Zinc Box Dimensions: 2"H x 2"W x 2"L WT: 0.9 lbs UPC: 8059617812249 Quick Guide (pdf)Owner's Manual (pdf)Brochure (pdf)

Read more less