Diesel Formula Fuel Stabilizer & Performance Improver - 32ozSTA-BIL Diesel Formula Fuel Stabilizer is a diesel additive that keeps fuel fresh for quick, easy starts and maximized for engine performance. Designed for use with all diesel engines, and all diesel fuels, Sta-Bil Fuel Stabilizer – Diesel formula prevents sludge and sediment formation, cleans and lubricates fuel injectors to improve performance and helps remove water. It is safe to use and recommended for use at every fill up, with the 32 ounce bottle treating up to 320 gallons of fuel.BOTTLE DIRECTIONS:To measure small quantities of this diesel fuel additive: remove small cap and seal (on long neck) squeeze bottle to desired level, and pour. To measure large quantities of fuel treatment: remove large cap and seal, pour (measurements on bottle side).USAGE DIRECTIONS:For in-season use: 1 oz. (30mL) treats up to 10 gallons (38L) of fuel. For storage: Use 1 oz. (30mL) to 5 gallons (19L).  DO NOT OVERTREAT. Diesel Formula STA-BIL® is recommended for use AT EVERY FILL UP for year round protection. Product does not contain alcohol.Features: Diesel fuel additive that prevents sludge and sediment formation Clean & lubricate entire fuel system Protect against corrosion with specially formulated diesel fuel STA-BILizers Reduces oxidation of diesel fuel caused by thermal breakdown Removes water Compatible with all ULSD & biodiesel blends Made in the U.S.A. WARNING: This product can expose you to chemicals including benzene which is known to the State of California to cause cancer, birth defects or other reproductive harm, and Toluene which is known to the State of California to cause birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Engine & Fuel Box Dimensions: 3"H x 5"W x 10"L WT: 2.05 lbs UPC: 073905222549

Read more less

MKA-64 Quick Release BracketEasily remove your electric steer and bow-mount trolling motor. High-yield composite construction is super strong, impervious to corrosion, and specifically designed for higher thrust motors and longer shaft lengths. The low-profile design leaves the deck clear when the motor is removed. A locking handle with stainless steel pins can be secured with a padlock (padlock not included; sold separately). NOTE: Recommended for 112 lb. thrust and 72" shaft trolling motors.Features: Designed to meet the increased stress created by high-thrust motors and long shaft lengths Allows bow-mount trolling motors to be quickly mounted and/or removed from the boat deck The low-profile design attaches the trolling motor to the top bracket and drops in over the deck-mounted puck Constructed of marine grade composite, powder-coated and anodized aluminum, and stainless steel to resist rust, corrosion, and discoloration The locking handle can be secured with a padlock (not included) for additional security Designed for use in freshwater

Read more less

Fuel Stabilizer - 1 GallonAMERICA’S #1 FUEL STABILIZER TREATMENTSTA-BIL Storage Fuel Stabilizer keeps fuel fresh for quick easy starts after storage. It removes water to prevent corrosion and cleanses carburetors and fuel injectors. This product also protects the engine from gum, varnish, rust, and corrosion and prolongs the life of any engine. Eliminate the need to drain the fuel of your 2 or 4 cycle engine by treating the fuel with STA-BIL before storing.USAGE DIRECTIONS:Use STA-BIL Fuel Stabilizer in any gasoline-powered vehicle or equipment you plan to store for 30-days or longekeeps the fuel fresh for up to 24 months during storage, eliminating the need to drain your tank. Works effectively in all gasoline blends, including Ethanol-blended fuel, up to E-85. 1-ounce (30-milliliter) treats up to 2½ gallons (9.5-liters) of fuel. Use STA-BIL only with fresh fuel, and keep the gas can or tank 95% full to avoid condensation build up in the tank during storage. Run Engine for 5 minutes after adding product to treat entire fuel system. Product does not contain alcohol. Perfect for collector cars, generators, lawn mowers, snow blowers, etc.PERFECT FOR STORING: LAWNMOWERS: Fuel can deteriorate in as little as 60 days, causing gum and varnish to build up in your lawnmower engine. That means difficulty starting the engine, poor performance and reduced engine life. The simplest, easiest fix is using a fuel stabilizer to prevent fuel deterioration during storage. BOATS: Drain the lower unit of old gear oil and replace with a fresh supply. When changing the gear oil, be sure to check for moisture. If water comes out first, or if you see milky or lumpy oil, this is an indication your boat is experiencing moisture contamination and will need new seals before next season. AUTOMOBILES: Fill the tank 95% full with new fuel and add STA-BIL Storage to keep it fresh for up to 24 months. MOTORCYCLES: When putting your bike away for the season, it’s important to find winter storage that is dry and protected from environmental elements. Avoid storing it near windows to prevent the paint from fading with constant contact with light. Features: America’s #1 Fuel Stabilizer Treatment Keeps fuel fresh for long term storage – up to 24 months Eliminates the need to drain fuel prior to storage Ensures quick easy starts after storage by preventing gum and varnish build up* Effective in all gasoline, including Ethanol and Non-Ethanol For all gasoline engines, including 2-Cycle. Use in your vehicles, motorcycles, small engines, generators, boats Made in the U.S.A. WARNING: This product can expose you to chemicals including benzene which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Engine & Fuel Box Dimensions: 5"H x 7"W x 10"L WT: 7.15 lbs UPC: 073905222136

Read more less

Small Swingback Boat Seat Cover - Rip/Stop Polyester NavyKeep your seats and consoles from cracking and fading! Boat seat and console covers are designed to protect your seats from damaging ultra-violet rays, wind, mildew and water. 600 denier Rip/Stop Polyester with polyurethane coating. All Covers fold easily for storage and keep your seats cool and clean!Dimensions: 36"H x 36"W x 20"D Features: Breathable Mildew and water resistant UV Protection Heavy duty Polyureathane coating Air vents Specifications: Color: Blue Cover Type: Seat Box Dimensions: 4"H x 10"W x 14"L WT: 3.1 lbs UPC: 040011090294

Read more less

Drink HolderDrink holder with bulkhead/gunnel mount and rod holder post mountFor cans, coffe mugs and insulated sleeves. Convenient accessory rack to hang lures and tools. Easily removableWARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

Read more less

Replacement 5" Dual Action Polisher Backing PlateFeatures: Designed specifically to work with Shurhold's Award winning Dual Action Polisher. 5" (125mm) polyurethane backing plate with 5/16" (24) treaded post Quick release hook and loop system, works with most 5.5" - 6.5" (140 -165mm) Velcro style pads Specifications: Type: Buffers & pads Box Dimensions: 1"H x 5"W x 5"L WT: 0.3 lbs

Read more less

Sikaflex® 221 Multi-Purpose Polyurethane Sealant/Adhesive - 10.3oz(300ml) Cartridge - Aluminum GraySikaflex®-221 is a high-quality multi-purpose non-sag 1-c polyurethane sealant/adhesive that cures on exposure to atmospheric humidity to form a durable elastomer. Meets approvals ASTM C920 types Sikaflex®-221 is tested and classified in accordance with ANSI/UL 723 “Test for Surface Burning Characteristics of Building Materials”.Uses:Sikaflex®-221 bonds well to a wide variety of substrates and is suitable for making permanent elastic seals of high adhesive strength. Suitable substrate materials are wood, metals, metal primers and paint coatings (2-c systems), ceramic materials and plastics.Characteristics & Advantages: Highly elastic and durable Resistant to aging and weathering exposure Non-corrosive Can be sanded and overpainted NSF registered, Proprietary Substances and Nonfood Compounds (black, gray, and white) UL listed for potable water (black, gray, and white) WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Quick Guide (pdf)

Read more less

ATLAS FingerFlex Blinker Trim Control for Hydraulic Helms - Single Control SwitchUPDATED DESIGN: FingerFlex "Blinker Style" Steering Wheel Trim SwitchT-H Marine offers the answer to convenient trim control for hydraulic helms - FingerFlex. Simple and easy to install, this unit can be added to any boat with only a moderate amount of difficulty.FingerFlex incorporates "Positive Clicking" technology that provides a positive touch and feel so, unlike similar systems, you know when your trim is operating and that's important when you really need it!FingerFlex can be installed on the right or left side of the bezel or both for dual controls. It can also be used to control hydraulic jack plates in addition to tilt and trim systems. Versions are also available to fit most mechanical steering systems.Features: The Ultimate in Trim Control for Hydraulic Helms Positive clicking technology for positive touch Operates engine trim and/or jack plates Fits hydraulic, cable, and tilt steering Easy installation Specifications: "Blinker" style switches allow quick and easy trim control Available in single or dual configurations

Read more less

VR-140 PRO Mirror - BlackThe 6″ x 20″ VR-140 PRO offers unparalleled viewable range and clarity via prescription-grade optics.  For the first time ever, the boat driver can follow a skier (or wakeboarder, tuber, wake surfer, etc.) from port to starboard inside of one uninterrupted, high-definition, high-resolution mirror. The premium mirror is housed in UV-resistant engineered polymer.  The spherical-tension socket provides infinite positioning for superior stability in the roughest waters.Click Here to Find Your Mirror Bracket Bracket sold separate.*Does not include cover*Sold as an Individual

Read more less

Sikaflex® 295 UV - White - 10oz Tube with NozzleExterior sealant and direct glazing adhesive for organic glass in Marine applications. Sikaflex®-295 UV is a 1-component polyurethane adhesive of paste-like consistency that cures on exposure to atmospheric moisture. It is suitable for interior and exterior sealing applications and to bond organic glass in the Marine business. Sikaflex®-295 UV meets the requirements set out by the International Maritime Organization (IMO).  Features: Excellent application properties Resistant to aging and weathering Suitable for organic glasses Areas of ApplicationSikaflex®-295 UV has been specially developed for the marine industry, where it is used to bond and seal plastic glazing materials in boats and ships. Because of its excellent weatherability this product can also be used to seal joints in exposed areas. Suitable substrates are aluminum (bright or anodized), GRP (polyester resin), stainless steel, timber, 2-component coatings, and plastic glazing materials (PC, PMMA). Seek manufacturer’s advice and perform tests on original substrates before using Sikaflex®-295 UV on materials prone to stress cracking. This product is suitable for experienced professional users only. Tests with actual substrates and conditions have to be performed to ensure adhesion and material compatibility.Product Benefits: Excellent application properties Resistant to aging and weathering Suitable for organic glasses Approved for the OEM market Wheelmark approved Surface Preparation:Surfaces must be clean, dry, and free from grease, oil, dust, and contaminants. Surface treatment depends on the specific nature of the substrates and is crucial for a long-lasting bond. Suggestions for surface preparation may be found on the current edition of the appropriate Sika® Pre-treatment Chart. Consider that these suggestions are based on experience and have in any case to be verified by tests on original substrates. Application:Sikaflex®-295 UV can be processed between 10 °C and 35 °C (climate and product) but changes in reactivity and application properties have to be considered. The optimum temperature for substrate and sealant is between 15 °C and 25 °C.Consider that the viscosity will increase at low temperatures. For easy application, condition the adhesive at ambient temperature prior to use. To ensure a uniform thickness of the bonding it is recommended to apply the adhesive in form of a triangular bead.Tooling & FinishingTooling and finishing must be carried out within the skin time of the product. It is recommended to use Sika® Tooling Agent N. Other finishing agents must be tested for suitability and compatibility prior to the use. RemovalUncured Sikaflex®-295 UV can be removed from tools and equipment with Sika® Remover-208 or another suitable solvent. Once cured, the material can only be removed mechanically. Hands and exposed skin have to be washed immediately using Sika® Cleaner-350H cleaning towels or a suitable industrial hand cleaner and water. Do not use solvents on the skin.OverpaintingSikaflex®-295 UV can be painted prior to and after the formation of the skin. If the painting process takes place after the sealant has built a skin, adhesion could be improved by treating the joint surface with Sika® Aktivator-100 or Sika® Aktivator-205 prior to the painting process. If the paint requires a baking process (> 80 °C), the best performance is achieved by allowing the sealant to fully cure first. All paints have to be tested by carrying preliminary trials under manufacturing conditions. The elasticity of paints is usually lower than that of sealants. This could lead to cracking of the paint in the joint area.

Read more less

Two-Bottle Rack Holds two 750ml wine bottles or two standard size water bottles 8-3/8"L x 5-1/2"H x 3-3/4"D Bulkhead mount

Read more less

Wall-Mount Paper Towel Holder Takes standard or jumbo roll Spring-loaded bar 1-7/8"H x 12-1/4"W x 4-3/8"D

Read more less

Rod Holder Gimbal Mount Fillet Table - 30" Features: Solid one-piece construction for long life and easy maintenance Easily adjustable, multi-position gimbaled rod holder mounting system folds flat for easy storage UV stabilized high-density polypropylene construction Large, 30" by 12-5/8" deep with towel bar. UV stabilized, high-density polypropylene Assembles in minutes, with all assembly hardware included Easily accessible knife and pliers holders, large has hose holder and towel bar Knives and pliers not included WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Width: 30" Box Dimensions: 3"H x 17"W x 34"L WT: 10.2 lbs UPC: 035514326728

Read more less

Sikaflex® 295 UV - Black - 10oz Tube with NozzleExterior sealant and direct glazing adhesive for organic glass in Marine applications. Sikaflex®-295 UV is a 1-component polyurethane adhesive of paste-like consistency that cures on exposure to atmospheric moisture. It is suitable for interior and exterior sealing applications and to bond organic glass in the Marine business. Sikaflex®-295 UV meets the requirements set out by the International Maritime Organization (IMO).  Features: Excellent application properties Resistant to aging and weathering Suitable for organic glasses Areas of ApplicationSikaflex®-295 UV has been specially developed for the marine industry, where it is used to bond and seal plastic glazing materials in boats and ships. Because of its excellent weatherability this product can also be used to seal joints in exposed areas. Suitable substrates are aluminum (bright or anodized), GRP (polyester resin), stainless steel, timber, 2-component coatings, and plastic glazing materials (PC, PMMA). Seek manufacturer’s advice and perform tests on original substrates before using Sikaflex®-295 UV on materials prone to stress cracking. This product is suitable for experienced professional users only. Tests with actual substrates and conditions have to be performed to ensure adhesion and material compatibility.Product Benefits: Excellent application properties Resistant to aging and weathering Suitable for organic glasses Approved for the OEM market Wheelmark approved Surface Preparation:Surfaces must be clean, dry, and free from grease, oil, dust, and contaminants. Surface treatment depends on the specific nature of the substrates and is crucial for a long-lasting bond. Suggestions for surface preparation may be found on the current edition of the appropriate Sika® Pre-treatment Chart. Consider that these suggestions are based on experience and have in any case to be verified by tests on original substrates. Application:Sikaflex®-295 UV can be processed between 10 °C and 35 °C (climate and product) but changes in reactivity and application properties have to be considered. The optimum temperature for substrate and sealant is between 15 °C and 25 °C.Consider that the viscosity will increase at low temperatures. For easy application, condition the adhesive at ambient temperature prior to use. To ensure a uniform thickness of the bonding it is recommended to apply the adhesive in form of a triangular bead.Tooling & FinishingTooling and finishing must be carried out within the skin time of the product. It is recommended to use Sika® Tooling Agent N. Other finishing agents must be tested for suitability and compatibility prior to the use. RemovalUncured Sikaflex®-295 UV can be removed from tools and equipment with Sika® Remover-208 or another suitable solvent. Once cured, the material can only be removed mechanically. Hands and exposed skin have to be washed immediately using Sika® Cleaner-350H cleaning towels or a suitable industrial hand cleaner and water. Do not use solvents on the skin.OverpaintingSikaflex®-295 UV can be painted prior to and after the formation of the skin. If the painting process takes place after the sealant has built a skin, adhesion could be improved by treating the joint surface with Sika® Aktivator-100 or Sika® Aktivator-205 prior to the painting process. If the paint requires a baking process (> 80 °C), the best performance is achieved by allowing the sealant to fully cure first. All paints have to be tested by carrying preliminary trials under manufacturing conditions. The elasticity of paints is usually lower than that of sealants. This could lead to cracking of the paint in the joint area.

Read more less

RTA-55 Quick Release BracketEasily remove your electric-steer, bow-mount trolling motor featuring QUEST technology. High-yield composite construction is super strong and impervious to corrosion and specifically designed for higher thrust motors and longer shaft lengths. Low-profile design leaves deck clear when motor is removed. Locking handle with stainless steel pins can be secured with padlock (padlock not included, sold separately).  Designed specifically for motors featuring QUEST technology to meet the increased stress created by high thrust motors and long shaft lengths Allows bow-mount trolling motors to be quickly mounted and/or removed from boat deck Low-profile design attaches trolling motor to top bracket and drop in over deck-mounted puck Constructed of marine grade composite, powder-coated and anodized aluminum, and stainless steel to resist rust, corrosion, and discoloration Locking handle can be secured with padlock (not included) for additional security Compatible with electric steer motors featuring QUEST technology Designed for use in freshwater or saltwater

Read more less

Original Penetrant - Aerosol - 13oz Can - Aerokroil FormulaLoosen frozen metal parts professionally, with Kroil Original Penetrant in liquid and aerosol (Aerokroil) formulas. Discover why Kroil has been trusted to help loosen bolts in various applications since 1939. Loosen frozen metal parts professionally, with Kroil Original Penetrant aerosol (Aerokroil) formula.The Penetrating Oil Used By ProsWhen freeing corroded items in tough spaces, nothing rivals powerful, industry-proven Kroil penetrating oil. Used and trusted by pros and experienced DIYers alike since 1939, Kroil quickly loosens rusted nuts and bolts and frees frozen shafts, pulleys, and more. No space is too tight to reach, thanks to Kroil’s ability to penetrate the smallest opening, thread, or crevice. Corrosion meets its match, as Kroil helps remove and prevent rust, cleans and lubricates, and displaces moisture. NSF Nonfood Compounds Program Listed Category Code: H2 Registration #165745 (8oz and gallons). 50-State VOC Compliant. Made in the U.S.A. (Portions of packaging imported.)Features: Attacks corrosion Helps to remove rust and carbon deposits Fast action Works everywhere Simplifies repairs Penetrates deeply

Read more less

Seafood Bowl - 12" - Stainless Steel - 2 Layer Serving BowlServe seafood the way it was meant to be enjoyed—fresh, flavorful, and beautifully presented. This elegant, dual-purpose serving bowl is perfect for everything from chilled oysters to sizzling paella. The vented, two-layer design is self-draining and allows users to serve cold seafood over ice without the mess of puddling water. Flip the top layer to create a snug lid that keeps hot dishes warm while minimizing condensation. Whether users are plating cocktail shrimp, tuna tartare, or a steamy seafood medley, this bowl brings both function and sophistication to the table.Specifications: Construction: Stainless steel Bowl Base Size: 12.5” Bowl Height: 3.25” (first layer) Bowl Height: 1.75” (second layer) Quick Guide (pdf)Brochure (pdf)

Read more less

Type E Plastic Bulb SocketFeatures: Material - Plastic Class - Type E Connection - Spade *Sold as an IndividualWARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Color: Black Box Dimensions: 1"H x 5"W x 7"L WT: 0.5 lbs UPC: 754059017082

Read more less

Sikaflex®-292 - White - 10oz Tube with NozzleSikaflex®-292 is a non-sag 1-component polyurethane adhesive of thixotropic, paste-like consistency that cures on exposure to atmospheric moisture. It exhibits excellent adhesive properties and good mechanical strength.Features: Good gap-filling properties Can be painted Bonds well to a wide variety of substrates Wheelmark approved  Solvent-free and very low VOC Areas of Application:Sikaflex®-292 is suitable for structural joints in marine constructions which will be subjected to high dynamic stresses. It is suitable to bond metals, particularly aluminum (including anodized finishes), metal primers and paint coatings (2-component systems),ceramic materials, plastics such as GRP (unsaturated polyester resin), ABS, etc. Seek the manufacturer’s advice and perform tests on original substrates before using Sikaflex®-292 on materials prone to stress cracking. This product is suitable for experienced professional users only. Tests with actual substrates and conditions have to be performed ensuring adhesion and material compatibility.Surface Preparation:Surfaces must be clean, dry, and free from grease, oil, and dust. Surface treatment dependson the specific nature of the substrates and is crucial for a long-lasting bond. Suggestions for surface preparation may be found on the current edition of the appropriate Sika® Pre-treatment Chart.Consider that these suggestions are based on experience and have in any case to beverified by tests on original substrates.Application:Sikaflex®-292 can be processed between 10 °C and 40 °C (climate and product) butchanges in reactivity and application properties have to be considered. The optimum temperature for substrate and sealant is between 15 °C and 25 °C. Consider that the viscosity will increase at low temperatures. For easy application, condition the adhesive at ambient temperature prior to use.Tooling & FinishingTooling and finishing must be carried out within the skin time of the sealant. It is recommended to use Sika® Tooling Agent N. Other finishing agents must be tested for suitability and compatibility prior to the use. RemovalUncured Sikaflex®-292 can be removed from tools and equipment with Sika® Remover-208 or another suitable solvent. Once cured, the material can only be removed mechanically. Hands and exposed skin have to be washed immediately using Sika® Cleaner-350H cleaning towels or a suitable industrial hand cleaner and water. Do not use solvents on the skin.Note: The domestically produced Sikaflex®-292 is not IMO certified Quick Guide (pdf)

Read more less

Max Control Holding Tank Deodorant - 1 GallonDometic Max Control-Natural Holding Tank Treatment eliminates odors and effectively breaks down waste in your sanitation holding tank without using formaldehyde or bronopol. The fast-acting proprietary enzyme/bacteria formula enhances beneficial bacteria and will continue to work and benefit downstream systems like septic or municipal treatment facilities. A light appealing fragrance means Max Control-Natural works for portable and gravity toilets and can be used in black or gray water tanks. California-compliant and approved for use throughout North America. Use 4 oz. liquid, per 40-gallon black or gray water tank treatment.Features: It contains a highly effective odor-controlling bacteria-based technology Enzymes break down waste solids to maintain a clog-free environment It has a light, appealing fragrance for open system applications (portables and gravity toilets) Helps keep tank sensors clean and unobstructed Works in black or gray water tanks Less packaging material per dose than most competitors’ enzyme products No formaldehyde or bronopol Concentrated formula - 1 pouch or 4 oz. liquid per 40-gallon black or gray water tank treatment WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Type: Bilge & Holding Tank Box Dimensions: 4"H x 7"W x 12"L WT: 8.6 lbs UPC: 713814344672 Brochure (pdf)

Read more less

Rust Stopper - 12ozSTA-BIL® Rust Stopper is an aerosol spray that delivers a protective coating for exposed metals, preventing rust and corrosion. Untreated and treated metals can rust within weeks of exposure. STA-BIL® Rust Stopper prevents rust and corrosion by protecting metal surfaces with a long-lasting barrier while maintaining joint and pivot points to move freely. Use anywhere metal needs to be protected from rust and corrosion.  Prevents rust and corrosion – Fights the formation of rust and corrosion on exposed metal surfaces  Long Lasting Protection – Leaves a film coating on metal surfaces that is proven to withstand the test of various weather conditions  Water Resistant – Specialized formula prevents normal water erosion and keeps the protected surface from developing water stream markings resulting in uneven corrosion.  Lubricates and Penetrates – Use to lubricate parts and tools to stop squeaks and sticking  Stops Existing Rust – Once rust is present, our innovative formulation stops rust in its tracks while offering a protective coating in its place. DIRECTIONS:Shake Well before using. Apply two to three inches away from the surface (if possible) and swipe back and forth to apply an even coat on the surface of the metal.Removal: High pressure, cold water pressure wash (1,000-3,000 psi) is recommended. A standard, industrial strength pressure washer will suffice. Can also be removed by warm water detergent wash or with a commercial-grade biodegradable cleaner.Features: Prevents rust and corrosion on interior and exterior metal surfaces Corrosion inhibitor with long lasting protection preventing future rust Water resistant formula prevents normal water erosion Lubricates and penetrates to stop squeaks and sticking Stops existing rust in its tracks Made in the U.S.A. Specifications: Type: Hard Water Box Dimensions: 3"H x 3"W x 8"L WT: 1.05 lbs UPC: 073905220033

Read more less

Fuel/Oil Mixing BottleAllows the addition of the exact amount of oil required for a 2-cycle engine. Oil level marks are in gallons and liters. Determines ratios for 100:1, 50:1, 24:1 and 10:1 mixes. Wide mouth, quart-size bottle.Features: Markings to mix oil for 2 Cycle engine Convenient wide-mouth, quart-size bottle Clear oil level marks in black Quick Guide (pdf)

Read more less

Gator Patch 3" x 6" Fiberglass Reinforced Repair PatchJust Prep, Peel, and Stick - Reinforced Repair Patch that Cures in Just Minutes!Repairs and protects Kayaks, Canoes, and Boats with Fiberglass, Aluminum, and Plastic surfaces. The preferred choice for a Kayak keel guard and skid plate. Cures in Sunlight in under an hour - quickly repairing or protecting your plastic, fiberglass, or aluminum surface. Can be sanded and painted for a seamless finish.Features: Gator Patch is a UV-Cure Fiberglass Reinforced Repair Patch Quick fix for a permanent solution Watertight, Impenetrable Repair Patch, Kayak Keel Guard, and Skid Plate Available in 4 sizes: 3"x6",6"x9", 9"x 12", and 3"x18" Kayak Keel Guard A Prep-Peel-Stick application that cures simply with UV light in under an hour Will bond to metal, fiberglass, wood, plastic, and virtually anywhere you need protection Repairs almost any surface, moldable around flat or curved areas, dents, joints, or angles Made With Pride in The USA. Perfect in or out of the water!  Great for any Fiberglass or Aluminum Boat, Kayaks, Canoes, Containers, Tanks, Plumbing, and more! Can be drilled, tapped, sanded, or painted within an hour Gator Patch™ is easy to use and apply with our Prep-Peel-Stick application. Cures simply with UV light in under an hour. Gator Patch comes with the extraordinary bonding and reliability promise that 100,000s of clients have known for over 20 years.Available in 4 sizes: 3"x6", 6"x9", 9"x12" and a 3"x18" Kayak Keel Guard - suitable for any patch, repair, or hull protection.Installation Tips:Using the Gator Patch to protect your kayak will make drops, skids, concrete, and cracks a thing of the past – the easiest insurance on your expensive investment. A Fiberglass Resin Patch that bonds physically and chemically to your kayak or canoe – curing in UV Sunlight in under an hour. An Easy & Simple application for a permanent protection solution.  View the complete installation instructions below.Notice for Heavy Plastic Boats:Hulls weighing over 100 pounds – such as Bass Hunter style boats or larger kayaks may benefit from additional layers of Gator Patch to increase the thickness of the most heavily worn areas for a longer lifespan.

Read more less

Single Rocker Switch for AirboatSingle Rocker Switch with deutsch connector and two 30" non-terminated power leads. Recommended for use with 15112-101 Airboat Trim Tab Kit Features: Switch specifically used for Airboat Single Rocker Switch (2) 30" non-terminated power leads WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

1-1/2" Throttle Knob - Red GroovesFeatures: 316 Cast Stainless Steel 1-1/2" Throttle Control Knobs Fit Morse MY-3, MV-2, Twin and Single Controls with 3/8" -24 Threads Throttle Knobs are colored for Sight and Grooved for Feel - Meets ABYC Specifications

Read more less

Throttle Knob - 1-7/8" - Gold GroovesFeatures: 316 Cast Stainless Steel 1-7/8" Throttle Control Knobs Fit Hynautic D-Dec/Sturdy Controls Throttle Knobs are colored for Sight and Grooved for Feel - Meets ABYC Specifications

Read more less

Git Rot Kit - PintUnique two-part liquid epoxy saturates and restores original strength to wood by penetrating the rot. Actually works with the loose rotted fibers. Wood must be dry. Apply by injecting into wood. Will soak into wood by capillary action. One-half hour pot life after mixing. Cures overnight. Sandable and paintable, can be drilled and screwed. Compatible with fiberglass resins, epoxies and most sealants. Great for transoms, stringers and cabin roof rot in both fiberglass and wood boats.*Note: This product is available for Ground Shipping OnlyWARNING: This product can expose you to chemicals including Di-n-butyl Phthalate which is known to the State of California to cause reproductive harm. For more information go to P65Warnings.ca.gov. Owner's Manual (pdf)

Read more less

Velcro Waffle Ultra-Fine Polishing Foam Pad for Rotary Polishers 90mm - WhiteThe WAFFLE ULTRA-FINE FOAM PAD is designed to remove fine imperfections and create an unbelievably high gloss finish. The waffle pad face, perfect against the stress caused by rotary motion, offers great stability when correcting paint defects or removing haze left by previous, heavier polishing phases. These pads are designed to work with the BigFoot LH19E and any other rotary polisher. We recommend pairing them with our UNO Pure Compound.The waffle design of the pad surface generates a smooth polishing experience and increases user comfort. Since the waffle-shaped face of these pads does not totally touch the surface, they work at a cooler level, reducing the risk of overheating the paint. Specifications: Type: Buffers & pads Box Dimensions: 1"H x 4"W x 4"L WT: 0.01 lbs UPC: 8059519685088 Quick Guide (pdf)

Read more less

Reed Switch Fuel Sender - 150 MMMost aftermarket fuel senders use a rotating float arm and resistance cards to measure the amount of fuel in a tank which can lead to erratic pointer movements.  This revolutionary design comes with many benefits!  This is ideal for applications where a conventional swing arm will not fit due to clearance issues.  The tubular design acts as a dampener to prevent the gauge pointer from moving due to fuel slosh.  The floatless fuel sender has no side to side motion, which means it has no moving parts to wear out.  It is top mounted and utilizes the aftermarket standard SAE 5 hole mounting flange and comes complete with neoprene gasket and mounting hardware. Features: Stainless steel construction Ethanol resistant Viton gasket 240-33 Ohm range Fits tanks with a depth of 6" (150mm)  Insulated 1/4"" spade connectors Standard 5 hole mounting flange Works with most standard marine fuel gauges Ground - Floating Connection - Insulated .25" Spade *Sold as an IndividualWARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Color: Silver Box Dimensions: 3"H x 3"W x 10"L WT: 0.6 lbs UPC: 754059064352

Read more less

Hydraulic Steering Fluid - QuartThis is a perfect formulation for the most demanding marine environments. Engineered for use in all hydraulic steering solutions.Features: Applications: All Hydraulic Steering Systems High viscosity index Corrosion inhibited Oxidation resistant Excellent anti-wear performance Specifications: Size: Quart Type: ISO 15 Low Temp Mineral Hydraulic Fluid

Read more less

Four Drink/Binocular Rack - TeakFeatures: 14-1/4"L x 4"W x 3-1/2"H Holds 4 cans or bottles, or 2 drinks and one pair of binoculars

Read more less

TM Quick ConnectorsAttwood's Trolling Motor Quick Connectors is the safe and easy quick connect / disconnect system from your trolling motor to your battery. For use where a plug and socket cannot be used. Heavy duty 10-gauge connector. Replaces battery clips 2-connector kit Safe and easy Semi-gloss finish

Read more less

Hustler® - Right Hand - Aluminum Propeller - LE1/LE2-1321- 3-Blade - 13.25" x 21 PitchTurning Point has built their reputation on a relentless focus on engineering the best performing aluminum propellers in the World. Utilizing state-of-the-art Squeeze Casting technology, they produce Hustler 3 Blade Propellers that run as fast as their competitors' Stainless Steel Props, and even sometimes faster! Super stiff metallurgy, unique blade geometry, aggressive pitch, rake, and cup all give you the best they can offer: Stainless Performance at Aluminum Prices! Not only does top speed, handling and hole shot improve, but also mid-range performance, which will save you a ton in gas usage. If you want the most your boat and engine combination can offer, then the Hustler 3 Blade delivers.The Three Blade Hustler is great for boaters looking to get the most top end out of their boat, and offer excellent bow lifting capabilities. Four blade props accelerate faster, exhibit stern lift, handle rough or following seas better, and maintain speed better as you load the boat down with gear or people. Three blade props run better on pontoons, while four blades and three blades both run well on tri-toons (recent testing has shown that pontoons and tri-toons run better with larger blade diameters than runabout or bass boat hulls).Squeeze Cast for Added StrengthStainless steel performance is built into the Hustler Aluminum prop line. This is achieved through unique blade geometry and an exclusive Turning Point manufacturing process, Squeeze Casting. This process generates the highest mechanical properties attainable in a cast aluminum prop resulting from high density tighter grain structure. Stiffer blades means less flex and a faster prop. Competitors' Aluminum propellers are manufactured utilizing old Die-Cast process that produces props with air bubble, voids, and granularity. Weak, lack of strength and stiffness. Difficult to repair. Blades Flex under load, inefficient, loss of propulsive efficiency.Long Lasting Ultracoat™ Powder Coated FinishExclusive to Turning Point, the Ultracoat powder coat rivals a fine automotive finish, and is more durable than paint. Utilizing a state-of-the-art five step process, Ultracoat gives the propeller a shiny, uniform appearance that enhances any boat's good looks. This is the Gold Standard in Aluminum Corrosion Protection. Prop looks Newer Longer! Compared to Competitors' 4 step Paint and Coating Processes that result in much less abrasion and corrosion resistance.Large Free Flowing Exhaust PortsTurning Point's Propeller Housings have massive Exhaust flow pathways. Their Propellers have 40% more exhaust flow Area versus competive product. More exhaust flow and less backpressure can generate more horsepower. Like headers for your boat.Turning Point manufactures Hustler propellers to fit 6-300+hp Evinrude®, Force®, Honda®, Johnson®, Mariner®, Mercruiser®, Mercury®, Nissan®, OMC®, Parsun®, Suzuki®, Tohatsu®, Volvo® Penta®, and Yamaha® Outboards and Sterndrives. Choose one of our Lifetime Warranty MasterGuard Installation Kits to fit your engine, then choose the propeller that matches your boating requirements. There are 3 and 4 blade, left and right rotation prop models with a variety of diameter and pitch options available for almost all boat types. Turning Point's Props Run Faster, Pull Harder, and Handle Better.Note: A Hub Kit is required for installation of this propeller. See the Turning Point Selection Chart or the Prop Wizard™ for hub kit selection.WARNING: This product can expose you to chemicals including CARBON BLACK which is known to the State of California to cause cancer, and LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Diameter (Inches): 13-1/4" Material: Aluminum Pitch: 21 Rotation: Right Box Dimensions: 7"H x 14"W x 14"L WT: 5.8 lbs UPC: 652480102318 Quick Guide (pdf)Brochure (pdf)

Read more less

Queaz-Away Motion Sickness Wristbands - PairQueaz-Away is a non-drug aid for people on the go. The unpleasant effects of bumpy flights, choppy seas, winding roads, rocking trains, and spinning Ferris wheels can ruin a trip or outing. Queaz-Away wristbands exert gentle pressure on points on each wrist to minimize or eliminate the miserable effects of travel. Made of tough, long-lasting, washable materials. Safe and easy to use. Simply slip onto your wrists, position, and enjoy your travel. No complicating buckles or adjustments. One size fits all. Handy carrying case included.

Read more less

Mercury Bravo 2-3 Anode KitContents: (1) 00815MG (1) 00820MG (2) 00818MG Material: MagnesiumPackaging: PolybagHardware: Included Specifications: Material: Magnesium Box Dimensions: 3"H x 7"W x 8"L WT: 1.3 lbs UPC: 8059617819392 Quick Guide (pdf)Owner's Manual (pdf)

Read more less

APT-F-LB-01 PowerTower® Center Mounted Light Bar for Forward Leaning Radar MountsCentral light bar for all forward learning PowerTowers®Compatible with:Scanstrut forward leaning PowerTower® radar mountsFeatures: All mounting holes are predrilled for easy retrofit installation, attach using mounting bolts, no extra fastenings required Cables run internally via a watertight seal Technical Specifications: Material - 316 Stainless Steel Height - 25.4" (404mm) Mount Position - Center In the Box: Light bar Instruction manual *Sold as an Individual Specifications: Construction: Aluminum Type: Light/GPS Brackets Height: 25.4 Box Dimensions: 5"H x 10"W x 25"L WT: 3 lbs UPC: 5060114797628 Quick Guide (pdf)

Read more less

Glass & Plexiglass Coat - 250mlWhy Use Gtechniq Marine Glass & Plexiglass Coat?Gtechniq Marine Glass & Plexiglass Coat greatly reduces the surface energy of glass and plexiglass surfaces, thereby making water form into tight droplets that readily roll off the surface.This improves visibility by both quickly clearing these surfaces of water and leaving less water residue on the surface to dry out as water spots.Features: Repels water Improves visibility Ultra durable Simple steps to help you get the best results: Shake the bottle very well before use Spread the product very thinly onto the surface using a Gtechniq MF1 Microfiber Buff to a streak-free finish using a fresh Gtechniq MF1 Microfiber Specifications: Type: Glass Box Dimensions: 2"H x 2"W x 6"L WT: 0.6 lbs UPC: 5060147721867

Read more less

Original Penetrant - Drip - 8oz CanLoosen frozen metal parts professionally, with Kroil Original Penetrant in liquid and aerosol (Aerokroil) formulas. Discover why Kroil has been trusted to help loosen bolts in various applications since 1939. Loosen frozen metal parts professionally, with Kroil Original Penetrant aerosol (Aerokroil) formula.The Penetrating Oil Used By ProsWhen freeing corroded items in tough spaces, nothing rivals powerful, industry-proven Kroil penetrating oil. Used and trusted by pros and experienced DIYers alike since 1939, Kroil quickly loosens rusted nuts and bolts and frees frozen shafts, pulleys, and more. No space is too tight to reach, thanks to Kroil’s ability to penetrate the smallest opening, thread, or crevice. Corrosion meets its match, as Kroil helps remove and prevent rust, cleans and lubricates, and displaces moisture. NSF Nonfood Compounds Program Listed Category Code: H2 Registration #165745 (8oz and gallons). 50-State VOC Compliant. Made in the U.S.A. (Portions of packaging imported.)Features: Attacks corrosion Helps to remove rust and carbon deposits Fast action Works everywhere Simplifies repairs Penetrates deeply

Read more less

Horizontal Mount Enclosure with Additional 5' Feeder HoseFor installing a washdown hose on our boat, home or spaHoseCoil's Horizontal Mount Enclosure is constructed of high density, durable ABS with high gloss UV protective coating. Included is a solid blue 5' HoseCoil constructed of high performance polyether material. HoseCoil features solid brass fittings and an adjustable brass nozzle with a rubber grip and rubber tip for fiberglass protection.The Horizontal Mount Enclosure can be used to plumbed directly into your existing pressurized water system or raw water washdown pump. Included is a 5' feeder hose for direct connection to an external water spigot. Specifications: Type: Tools & Accessories Box Dimensions: 4"H x 11"W x 23"L WT: 4.5 lbs UPC: 659988116823

Read more less

30A 125V Power Inlet303SSEL-BProduct Features Solid cast 316 stainless steel Locking waterproof cap Easy Lock System Soft Touch cap stays open in the upright position 8-way right angle rear safety enclosure WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Inlets Box Dimensions: 4"H x 6"W x 9"L WT: 1.25 lbs UPC: 093344300172 Quick Guide (pdf)Owner's Manual (pdf)Brochure (pdf)

Read more less

Tea Tree Power Gel - 2ozTea Tree Power is the all-natural marine grade odor eliminator containing a proprietary blend of 100% Australian Tea Tree Oil and other natural ingredients. Its' powerful, yet pleasant smelling vapors, diffuse throughout your cabin and lockers, attacking and eliminating the source of unpleasant odors caused by mold, mildew, and bacteria.Tea Tree Power Gel slowly evaporates to provide continuous, natural, and long-lasting odor control for up to 3 months. It penetrates deep into porous materials (cushions, carpets, and upholstery) delivering a deep cleaning with enduring odor protection.The 2 oz. size is perfect for your boat's head, bilge, hanging and storage lockers, and galley cupboards. It will also take care of nasty odors in your car, your gym locker, and laundry room. Specifications: Type: Fabric & upholstery Box Dimensions: 2"H x 3"W x 3"L WT: 0.25 lbs UPC: 028026191137

Read more less

Ultimate Paste Wax - Long-Lasting, Easy to Use Synthetic Wax - 8ozMeguiar's Ultimate Paste Wax is a premium paint protectant with a synthetic wax blend for maximum performance. The improved formula now delivers even better durability than before. Meguiar's proprietary Hydrophobic Polymer Technology increases surface tension for relentless water beading action that lasts. This advanced formula also delivers deep, dark reflections, incredible gloss, and shine while leaving a slick finish. This finely tuned wax was formulated to check all the boxes, without compromising ease of use. It goes on butter smooth and comes off just as nice, even in the sun! Premium foam applicator and microfiber towel included. Ultimate is also available in liquid wax.Features:  IMPROVED FORMULA: Improved formula delivers a glossier finish, increased protection, and more water beading action in one easy step EASY TO USE WAX: Easy spread on and wipe off application, even in full sun LONG-LASTING WAX PROTECTION: Advanced synthetic formula delivers a long-lasting protective barrier on the paint while amplifying reflection for incredible depth, gloss, and shine RELENTLESS WATER BEADING: Hydrophobic Polymer Technology increases surface tension for relentless water beading CLEAR COAT SAFE: Safe and effective on all glossy paints and clear coats Specifications: Type: Waxes & Polishes Box Dimensions: 3"H x 6"W x 6"L WT: 1.1 lbs UPC: 070382015732

Read more less

Toilet Tissue Rack Spring-loaded bar 1-7/8"H x 5-1/2"W x 3-3/4"D

Read more less

Teak Brite® Advanced Formula Teak Oil - 32ozMost advanced teak oil and sealer available. Will deliver long lasting protection even in tropical climates. Penetrates deep into wood (dry wood only) to feed and protect finish. Compatible with Life-Calk® seam compounds. (Hint: for a fantastic finish, allow teak to dry for at least 24 hours minimum before applying oil). Specifications: Type: Teak Box Dimensions: 3"H x 5"W x 7"L WT: 2.1 lbs UPC: 020537011881

Read more less

Marine Mold & Mildew Preventer - 1qtSay goodbye to mold and mildew on the boat! The Xanigo Marine Mold & Mildew Solution is here to save the day. This will prevent and protect unsightly mold and mildew on vinyl boat seats, life jackets, canvas, bumpers, carpet, and any other areas with high moisture.Simply spray the Mold & Mildew Preventer onto a clean, dry surface and spread it evenly with a microfiber towel. That's it! With just one application, the boat will be protected against mold and mildew for up to 90 days.Need help removing the mold first? Check out Xanigo Marine's Mold & Mildew Stain Remover! Features: Long-lasting residual protection World's only patented organosilane compound, which provides greater protection No alcohol and non-flammable Water-based (only water-based organosilane) Long shelf life Specifications:Bottle Size: 32 ouncesThe Complete Process to Treat and Prevent Mold & Mildew on Vinyl Boat SeatsSTEP 1: Remove Mold & Mildew with Xanigo Marine's Mold & Mildew Stain RemoverXanigo Marin’s Mold & Mildew Stain Remover is a very effective way to remove mold and mildew. Being a harsh chemical, it should only be used once to remove the mold, and then the preventer should be applied to prevent the mold from coming back. Liberally apply the Mold & Mildew Stain Remover to the seats. Let it sit for 60-90 seconds but do not let it dry. An additional solution may need to be applied— keep it wet. Agitate in a circular motion with a brush to remove the mold from the pores. Rinse thoroughly with clean water.STEP 2: Neutralize the RemoverAfter rinsing the remover off with fresh water, it's important to make sure any leftover remover is neutralized so it doesn't dry out vinyl or impact stitching. Spray the Waterless Wash onto the seats and wipe it in with a microfiber cloth to neutralize the chemicals in the remover.STEP 3: Prevent Mold & Mildew with Xanigo Marine's Mold & Mildew PreventerWith just one application, a boat will be protected against mold and mildew for up to 90 days. The preventer creates a covalent bond with the surface on which it is applied. Users can apply this to almost any marine surface, including vinyl seats, life jackets, canvas, ropes, compartments, live wells, bilges, patio furniture, and other areas of high moisture.Spray the Mold & Mildew Preventer onto a clean, dry surface and spread it evenly with a microfiber cloth. Remember to spread, not wipe off.STEP 4: Maintain Seats with Xanigo Marine's Waterless WashKeep the boat clean between mold prevention applications without the use of harsh chemicals or wasting water. Spray the Waterless Wash onto the seats, let it sit for 15-20 seconds, and wipe it off with a microfiber cloth. Remove sunscreen (a major food source for mold) and leave a refreshing smell without impacting the protective layer created by the mold & mildew preventer.Also, a great way to shine up a gel coat quickly! Specifications: Type: Mildew & Moisture Box Dimensions: 4"H x 4"W x 10"L WT: 2.25 lbs UPC: 860007772702 Quick Guide (pdf)

Read more less

Instant Calcium, Rust & Lime Remover - 16oz Spray BottleC.R.L means clean, reveal, and luster! Do it the right way with this deposit killing organic formula. One spray then polish away with Calcium, Rust & Lime Remover!Quickly and easily removes even the crustiest of stains, deposits and build-up. Made of organic salt, it is safer and easier to use than traditional cleaners. Recommended for removal of hard water spots and rust stains.Use On: Glass Plastic & Acrylics Aluminum Fiberglass Tile Stainless Steel Brass Copper Painted Surfaces Enamel finishes Instantly Removes: Hardwater Spots Encrusted Calcium/Lime Deposits Heavy Green Tarnish Heavy Oxidation Rust Corrosion Grease Oil Water Stains Soap Scum Build-up Not for: Chrome, Marble, some Granite, Jura, Travertine & TerrazzoWARNING: This product can expose you to chemicals including Methanol which is known to the State of California to cause reproductive harm, and 1, 4-Dioxane which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov. Specifications: Type: Hard Water Box Dimensions: 2"H x 4"W x 11"L WT: 1.3 lbs UPC: 065925016062

Read more less

#47 Hard Water Spot Remover - 16ozThick, low-drip formula remains on vertical surfaces for easy cleaning. New technology chemically embraces and lifts mineral deposits and protects the surface from future water spots. Easy to apply and easy to wipe off.Benefits: Cleans surface dirt and grime Effortless application and wipe-off in full sun The product can be applied by hand It brings it back to like-new condition VOC Compliant Specifications: Type: Hard Water Box Dimensions: 2"H x 4"W x 11"L WT: 1.2 lbs UPC: 070382147167

Read more less

Mold & Mildew Stain Remover - 16oz303 Mold & Mildew Stain Remover quickly and safely cleans and removes tough mold and mildew stains from virtually any water-safe surface.  Not only does this product CLEAN unsightly mold and mildew stains that have already formed, it will also help PREVENT mold and mildew stains from re-occurring on the treated surface. Unlike other mold & mildew cleaner products on the market, this product does NOT contain bleach, and will leave behind a fresh scent, with no strong odors to worry about during or after use. Works safely on vinyl, plastic, painted surfaces and even safe enough for use on fabric.Features: Quickly removes mold & mildew stains on contact Blocks mold & mildew stains from re-occurring Does not contain bleach Works on ALL water-safe surfaces Made in the U.S.A. *Sold as an Individual WARNING: This product can expose you to chemicals including Diethanolamine,Ethylbenzene which are known to the State of California to cause cancer, and Sulfur Dioxide which is known to the State of California to cause reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Mildew & Moisture Box Dimensions: 2"H x 4"W x 11"L WT: 1.25 lbs UPC: 082043305731

Read more less