7.5" Stiff Cleaning Brush - GreenPremium cleaning brush made of high quality poly blocks and flared bristles.  Swobbit brushes are perfect for a variety of cleaning surfaces ranging from teak and non-skids to general and delicate surfaces.  Uses corrosion resistant staples and wrap around safety bumper to protect surrounding objects.  Whether boats, auto, RV or aviation, Swobbit cleaning brushes make protecting your investment, a simple one.Features: Ideal for teak and non-skid decks, boat bottoms and any textured surface requiring aggressive cleaning of stained and dirty surfaces.  7.5" Wide molded poly block with premium quality flared bristles  Not recommended for glossy surfaces *Sold as an Individual Specifications: Type: Tools & Accessories Box Dimensions: 7"H x 8"W x 11"L WT: 1.55 lbs UPC: 633590773551 Brochure (pdf)

Read more less

3-1/2" ID 45-Degree EPDM Black Rubber Molded Wet Exhaust Elbow with 4 T-Bolt ClampsTrident EPDM marine wet exhaust connections are molded of high-temperature black EPDM rubber with a smooth bore and cover; except elbows of 6” I.D. or bigger have molded reinforcing ribs on the outside.Features: Four stainless steel clamps are included This elbow has excellent resistance to ozone, salt water, diesel fumes and splashes, cold, heat, and aging Exceeds (SAE J2006-R1, and ABYC & NMMA P-1 exhaust standards) Black high-temp EDPM rubber  Construction: Color: Black Reinforcement: Reinforcing ribs on 6” I.D. and above Temperature Range: up to 250°F (121°C) Specifications: Inner Diameter: (inch) 3.5” / (mm) 88.9  Outer Diamter: (inch) 4.0" / (mm) 101.6 A: (inch) 1.5” / (mm) 38.1 B: (inch) 1.5” / (mm) 38.1  C: (inch) 5.5” / (mm) 139.7 W: (inch) 0.25” / (mm) 6.35 Elbow Degree: 45 degrees Weight: (Lb/Ea) 0.7 / (Kg/Ea) 0.32 Specifications: ID Diameter (inches): 3-1/2" Box Dimensions: 7"H x 8"W x 8"L WT: 1.7 lbs UPC: 704917001500 Quick Guide (pdf)

Read more less

Mast Mounts For 18" Garmin, KVH M3 & Raymarine 37STVCompatible Units: Garmin GMR18/GMR18HD/18Xhd/18HD+/Fantom18/GMR40 B&G / Lowrance /Simrad DX45/3G/4G / HALO20 / HALO20+ Intellian i3 KVH TracVision M2/M3 Raymarine 37STV /Quantum / Quantum 2 Sea Tel Coastal 14 Still the first choice for boat owners the world over, Scanstrut Mast Mounts are the ultimate solution for mounting radars on yachts masts.Raising the antenna clear of any obstructions or interference, the mast mount is a classic and reliable installation.Features Easy and quick to install with all fastenings supplied Attached to mast by four swivel feet matching the profile of any mast 12 point fixing using highest quality Monel rivets for a secure installation Nylon washers for all fastenings to protect paint finish Waterproof cable grommet included to seal cable entry into mast Materials Marine grade 6082 aluminum Polyester powder coated for a durable and gloss white finish Kit includes 1 x Mast Mount 4 x Swivel mounting feet 1 x Complete fastening pack Specifications: Construction: Powder Coated Aluminum Type: Mast Mount Box Dimensions: 5"H x 12"W x 20"L WT: 5.25 lbs UPC: 5060114790902 Quick Guide (pdf)

Read more less

12" AFT Leaning Mount for Searchlights & Thermal Cameras with 7" x 7" Base PlateSeaview 5" and 12" tall aft leaning mounts for thermal cameras and searchlights. Powder-coated brilliant white gives it a nice clean look and yet is very durable. Specifically designed for installations where space is very limited. The base for this mount is 7″ x 7″.Cable ManagementA hollow oval mast section provides plenty of room for cable management.Space-Saving DesignThe small 7"x 7" base footprint makes this a great solution to an installation where space is an issue.  Specifications: Type: Aft Leaning Mount Height: 12" Box Dimensions: 11"H x 11"W x 20"L WT: 6.9 lbs UPC: 839662009355

Read more less

0-12 Degree Wedge for Satellite MountsThe Seaview Low Profile Adapter Wedge will help you achieve the angle that you need to optimize your Low Profile Adapter or Seaview mount with 8" round base installation. By rotating the AMAW wedge halves you can achieve 0°-12° of adjustment. *The AMAW wedge works with AMA16, AMA18, AMA24 and AMAGXF wedges as well as all Seaview mounts with 8" round base. Specifications: Type: Wedges Box Dimensions: 2"H x 9"W x 10"L WT: 1.55 lbs UPC: 839662002653 Quick Guide (pdf)

Read more less

Starlink Performance Gen 3 Modular Top Plate for Mounts Ending in M1 & M2 - BlackThe Seaview modular top plate ADASPG3 for the Starlink Performance Gen3 Antenna is specifically engineered for the demanding marine environment. This top plate fits any Seaview modular pedestal mount ending in M1 or M2 and is light bar compatible. The optional light bar for this would be the LTBR and sold separately.The plate is machined from marine-grade high-density polyethylene to ensure the best possible finish and corrosion resistance.This plate also has a grommet in the center for water-resistant cable routing.

Read more less

Visibility Kit II with Miniport TracMountCheck out the RAILBLAZA Visibility Kit II –  for safe and awesome kayaking experiences! Whether you’re out exploring on a sunny day or cooling off under the stars, this kit has you covered. This value-packed offer includes everything you need to be seen and stay safe from dawn until dusk, so you can have as much fun as possible. The StarPort HD keeps everything secure, and the 3-Foot ExtendaPole lets you proudly display the RAILBLAZA safety flag. Plus, when the sun goes down, clip in the Illuminate i360 for an all-round white navigation stern light that meets marine use standards! Get yourself a Visibility Kit II and make sure everyone can spot you from miles away. Kayaking isn’t just about having a good time – it’s also about being safe and responsible!Make sure others can see you out on the water! Get visible with the RAILBLAZA Visibility Kit II which is packed with essentials like the i360 light and Miniport TracMount - this kit has it all for max visibility day or night, plus IMANA-approved for marine use. Ready to get out there?Features: 3 operating modes for the i360 light (high, medium, and blink) Easily breaks down for storage Mounts onto any track with a turn of the MiniPort  Specifications: Weight: 1.04 lbs Material Composition: UV Stabilized Fiberglass Reinforced Plastic Parts Included: 1 x i360 Light 1 x Extenda Pole kit 1 x MiniPort TracLoader 1 x Kayak Safety Flag

Read more less

StarPort Base - BlackThe RAILBLAZA StarPort Base is the ultimate in versatility and convenience. This multifunctional mount will help you custom-fit and re-tasking different RAILBLAZA accessories on your kayaks, canoes, power boats, sailboats, and ATVs. Featuring a slide-locking mechanism for secure attachment coupled with a cap and gasket that prevents water from seeping in, the StarPort base makes the perfect companion for any of your on-water adventures! Made from high-grade engineered plastics and available in black or white. Let the RAILBLAZA StarPort equip you with the advantage you need out on the water by confidently securing your desired accessory with reliable support.The RAILBLAZA StarPort is a unique and versatile multifunctional mount that allows users to fit and re-task the full range of RAILBLAZA accessories. Made from high-grade engineering plastics, the StarPort is easily installed on kayaks, canoes, power boats, sailboats, ATVs, and more.StarPort Base Overview:KEEP YOUR ACCESSORIES CLOSE AT HAND - The RAILBLAZA StarPort Base is the perfect way to keep all of your kayak, canoe, power boat, sail boat, and ATV accessories within easy reach. This versatile multifunctional mount can be custom-fitted to any of your vessels and quickly allows you to re-task different RAILBLAZA accessories.ADAPT TO ANY SITUATION - Featuring a slide locking mechanism for secure attachment and a cap and gasket to prevent water from seeping in, the RAILBLAZA StarPort Base is perfect for any on-water adventure. Made from high-grade engineered plastics, it's available in black or white to match your needs.SECURELY ATTACHES ANY ACCESSORY - Let the RAILBLAZA StarPort Base provide you with the confidence you need to securely attach any of your desired accessories. With its reliable support, you'll be able to effectively adapt to any situation while out on the water.Features: StarPort can be used as a deck or a flush mount It comes with a gasket and cap Features slide locking mechanism Made from high-grade engineered plastics Accepts any RAILBLAZA StarPort accessory Specifications: Weight: 0.21 lbs Material Composition: UV Stabilized Fiberglass Reinforced Plastic Parts Included: 1 x StarPort Assembly Stainless Hardware Specifications: Mounting Style: Surface Type: Mounting Brackets Box Dimensions: 2"H x 4"W x 6"L WT: 0.2 lbs UPC: 856154004193

Read more less

Trolling Motor Support XLKeep your electric trolling motor safe and secure with the Trolling Motor Support XL from RAILBLAZA! This clever accessory ensures peace of mind out on the water and while traveling. Its easily adjustable height lets you find the perfect fit for your electric trolling motor shaft, and its flexible strap will hold it in place during transit so you can avoid any unnecessary damage or vibration. Thanks to the handy offset feature, this support can be positioned inboard or outboard to match the alignment of your motor perfectly. And when you’re ready to get down to serious fishing, the support can be removed to create an unobstructed deck space. The best part is that it can be mounted to any RAILBLAZA StarPort mount so you can install it on any application – now that’s convenient!Keep your electric trolling motor in tip-top shape with the Trolling Motor Support XL from RAILBLAZA! Easily adjustable and removable, this clever accessory ensures peace of mind out on the water and while traveling. Plus, its flexible strap and offset feature make it perfect for any application – now that's convenient!Trolling Motor Support XL Overview:KEEP YOUR ELECTRIC TROLLING MOTOR SAFE - The RAILBLAZA Trolling Motor Support XL is the perfect way to keep your electric trolling motor safe and secure while you're out on the water. Its easily adjustable height lets you find the perfect fit for your electric trolling motor shaft, and its flexible strap will hold it in place during transit so you can avoid any unnecessary damage or vibration.HANDY OFFSET FEATURE - The support can be positioned inboard or outboard to match the alignment of your motor perfectly, and when you're ready to get down to serious fishing, the support can be removed to create an unobstructed deck space.CHOOSE YOUR MOUNT- The support can be mounted to any RAILBLAZA StarPort base mount so you can install it on any application – now that's convenient!Features: Can be offset inboard or outboard to suit the alignment of your Trolling motor shaft. Height is adjustable to suit different shaft heights. The flexible strap holds the shaft captive to avoid vibration on the road or water. Can be removed to create a clear deck when the trolling motor is in use Specifications: Weight: 0.70 lbs Material Composition: UV Stabilized Fiberglass Reinforced Plastic Parts Included:1 x Trolling Motor Support XL assembly

Read more less

Wiring Cable for Siren 3The Wiring Cable 2 accessory is used to connect additional wired sensor inputs and to also drive additional outputs to your Siren 3 Pro device. Each wire has unique functionality to support the corresponding sensor.Features: Compatible with Siren 3 Pro only Cable length: 3 ft. Wire length: 6 in. Direct connection to Siren 3 Pro on bottom-right connector on device Outputs: 5 Inputs: 7

Read more less

SilverSteer UC128TS High Performance Cylinder V2P with Offset Link Arm - Port VersionSpecially designed for high-performance, high-torque applications, the SilverSteer™ UC128TS cylinder is recommended for bass boats, flats boats, and tournament fishing boats. Compatible with competing helms, hoses, and oil, the UC128TS is built to last with a heavy-duty stainless steel cylinder rod, seals, and link assemblies. Simple to install and fits almost every 2- and 4-stroke outboard engine on the market.Features: Type 2 offset link arm Link arm attached to the port side of the cylinder Please note that P/N: UC128TS-SVS 2P is a direct replacement of P/N: UC128-SVS 2P. P/N: UC128TS-SVS 2P has the same cylinder, but it's easier to service.

Read more less

UC168-1 Hydraulic Steering CylinderInboard boat hydraulic steering cylinder. Balanced cylinder, an equal number of turns lock-to-lock.

Read more less

14" Straight Trolling Motor PlateThis trolling motor mounting plate is manufactured using 6061 T6 aluminum, which is primed, and powder-coated with added UV protection for a high-quality and durable product. The tapped holes in the brackets are clean and free of powder coat, as well as gaged for accuracy and consistency for ease of bolt engagement. Sea Bracket's manufacturing process is so reliable that the bracket can be used universally for both port and starboard installation.1/2" 6061 aluminum (compatible with Rhodan QRB, Minn Kota RTA-54, and RTA-62).Specifications:Plate Dimensions (inches): 14" x 8" x ½”Suggested hardware: 1/4–20 tapered Phillips machine screws, fender washers, backing plates, and locknuts  316 stainless steel is ideal for corrosion prevention Mounting hardware that comes with the Rhodan quick-release bracket or mounting hardware that comes with the Minn Kota RTA-54/ RTA-62

Read more less

Hydraulic Hose Kit 6' - Two Hoses with Bulkhead FittingsTwo high-pressure flexible hoses with pre-crimped nickel-plated fittings, bulkhead fittings (for KIT OB-BHBR only), and bend restrictors on one end. Application:Recommended for use with all Uflex helms with 1500 psi relief valvesSpecification:Hose Length (feet): 6’  Specifications: Cable Length (Feet): 6' Box Dimensions: 5"H x 14"W x 15"L WT: 2.55 lbs UPC: 702755025054

Read more less

Tee Fitting with Bleed Nipple for IB & Stern Drive CylindersBleed fitting for all inboard and stern drive cylinders.Specifications: 1/4 NPT to 3/8 COMP FITTING Cylinder Side = 1/4 NPT Hose Side = 9/16 - 24 UNEF 2A

Read more less

MACH™ Series High Efficiency & Flexibility Engine Control Cable - Mercury Style - 14'MACH5 - Mercury® style (like C5)MACH5 Stroke: 95 mm (3.75”). For Mercury® and Mercruiser® engines. Blue color jacket designed for high performance applicationsFor the ultimate in efficiency and response, the Mach Series cables deliver unmatched results. They have been specifically designed to make even the most complex of cable installations result in smooth, easy and precise shift and throttle movement. Using a stranded wire core with lubricated extrusion, the Mach cables are an ideal solution for applications with long cable runs, tight bends, or where easy and precise throttle response is required. Mach Series cables also feature solid stainless steel output fittings.The “high performance” MACH™ Cables are the result of our decades of experience in producing high quality, long lasting, flexible cables. The innovative core design maximizes efficiency and minimizes lost motion, while the exclusive design of the conduit provides extremely high level of flexibility.Features: Suitable for outboard – inboard and sterndrive engines High efficiency for smooth operation High flexibility for reduced bend radius Ideal for long complex cable routing Maintenance free Stainless steel cables end fittings Blue outer jacket resists against abrasion, UV and chemicals

Read more less

GoTech™ 1.0 Universal Front Mount Outboard Hydraulic Steering SystemFor outboard single engine up to 115hp.Kit Contains: UP18 - Intermediate helm pump UC81-OBF - Front mount outboard cylinder OL 150 - Hydraulic oil - 2 litres KIT OB-GT-60 - Hose kit dia, 1/4" 6M(19.7") length Brochure (pdf)

Read more less

Deluxe Megaphone with Siren - Red/Grey - 16WOur 16 watt deluxe megaphone features a built-in switch selectable electronic alarm siren, pistol grip, press to talk switch, volume control, and shoulder strap. It is weatherproof. It uses eight C-batteries, which are not included. Specifications Wattage 16W Max. Effective 800 feet Powerful solid state megaphone Built-in switch selectable electronic alarm siren Pistol grip Press-to-talk switch Volume control Shoulder strap Durable weatherproof construction Operates on 8 "C" cells (not supplied) 9.1" Bell Diameter x 14.25" Long 3lbs, 4oz w/o batteries Specifications: Auto Signaling: No Hailer Wattage: 16w Intercom Capability: No Listen-Back: No Color: Red/Grey Box Dimensions: 10"H x 10"W x 15"L WT: 4.5 lbs UPC: 030519143707 Quick Guide (pdf)Owner's Manual (pdf)

Read more less

SingleViu 52mm (2-1/16") Oil Pressure Gauge - 5 Bar - 0-180 OhmSingleViu instruments represent the latest technology in instruments, and offer a top of the line solution by being able to work directly with traditional analog senders or work directly off a J1939 CAN network. Each SingleViu gauge has it's own microprocessor, which allows it to have a dual-input capability that can be switched from it's default analog input to J1939 CAN via the SingleViu Configuration software . Each speedometer or tachometer can also the display the J1939 system fault codes. These features, along with waterproof and fog proof construction, RGB LED illumination and advanced stepper motors make SingleViu the ideal solution when traditional gauges are needed or desired.*0 - 180 Ohm Sender RequiredFeatures: 10-184 Ω Default Input  RGB LED Illumination (default illumination set to White)  Water Resistant Front & Rear  Includes Wire Harness Voltage 12-24V Molex MX 150 8 Pin Connector Spin-Lok™ Mounting Hardware Analog Input ∗Sold as an Individual WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Voltage - Input Range (Volts): 12-24V Series: SingleViu Gauge Type: Oil Pressure Gauge Size: 52mm Box Set: No Box Dimensions: 4"H x 5"W x 6"L WT: 0.3 lbs UPC: 4103590683175 Owner's Manual (pdf)

Read more less

Zinc Split Collar Anode for SD20, SD25, SD30, SD31, SD40, SD50 & SD60 Yanmar SaildrivesTecnoseal Zinc Yanmar Saildrive Split Collar Anode without fittings. In zinc for salt water. Original part number 196440-026600. Fits Yanmar SD20-60 saildrives. Plate adaptors available as PLAC-1. If you require bolts please see KIT01305-1. Specifications: Material: Zinc Box Dimensions: 1"H x 3"W x 6"L WT: 0.7 lbs UPC: 8059617816070

Read more less

Mercury Alpha 1 Gen 2 Anode KitContents: (1) 00806BISMG (1) 00814MG (1) 00819MG (2) 00817MG (1) 00820MG Material: MagnesiumPackaging: PolybagHardware: Included Specifications: Material: Magnesium Box Dimensions: 3"H x 8"W x 8"L WT: 1.5 lbs UPC: 8059617814533 Quick Guide (pdf)Owner's Manual (pdf)

Read more less

Quick Reference Weather Forecasting CardShows the use of wind direction, barometric pressure, and cloud type in predicting the weather, plus a full list of radio weather stations for official broadcasts, key information on storm warnings, hurricane avoidance, navigating in fog and other hazardous conditions, and more. Weatherproof high-strength plastic, full color on both sides. Punched for binder or bulkhead mounting. Dimensions: 8.5″ x 11″ (216 x 279 mm).

Read more less

Solenoid valves direct the flow of fluid to the actuators. The solenoid valves lock tightly to secure the tabs in place. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

Padded Cookware Carry Case Conveniently store and transport your nesting cookware set in Magma’s luggage quality padded carrying / storage case.  Constructed from Heavy Duty 600-Denier Polyester with vented mesh side panels; this case has been designed for storing your nesting cookware set, optional colander, sauté / omelet pan, and removable handles in one space saving location while the venting panels aid in keeping unwanted moisture from accumulating inside the case. Outfitted with a main compartment for cookware and (2) internal corner compartments for storing up to (4) removable handles.  This case features thick padding for maximum protection, reinforced stitching, Heavy Duty zipper, and Heavy Duty Nylon carrying handles making it a must have for every traveling cooking enthusiast. With the same quality and craftsmanship you’ve come to expect, once again Magma has just what you’ve been looking for.Technical Specifications: Material - 600-Denier Polyester  Weight - .95 lb (.44 kg) *Sold as an Individual  Owner's Manual (pdf)

Read more less

Fish Basket A Stainless Steel basket used for preventing delicate foods from flaking and falling apart and holds a variety of food sizes and shapes. Features: Dishwasher safe Made of durable Stainless Steel *Sold as an Individual WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

EIC Relay ModuleThis Bennett relay module offers three features combined into one sophisticated control: the Bennett rocker switch control, the trim tab indicator, and the auto tab retractor. Features: Water resistant, highly accurate, and features variable-intensity LEDs (for day or night use) The relay module is mounted near the transom (simplifies installation) 12V WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

EIC Relay Module - 24VSpecifications: Electronic Indication Control Voltage: 24V WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

24x12 Hydraulic Trim Tab System with One Box IndicationHydraulic trim tabs are known for power, precision, and durability. Get the most from your boat, no matter what the load, speed, or sea conditions. Using the helm control, you can adjust the tabs individually or in unison to create the perfect cruising attitude. Increase speed and fuel economy, smooth a rough ride, and get on plane faster.Features: Get on plane fast, and stay on plane at intermediate speeds Correct listing and uneven loads Improve visibility and safety Reduce pounding and eliminate porpoising Low maintenance, long-term value, and ease of service Exclusive transom mount interlocking tab design Sport batwing option (M80/ M120) provides 30% more lift for limited-space installations Bottom and piano hinge mounts are available for custom order Kit Includes: (2) Trim plane assemblies (2-4) Hydraulic actuators (A1101A) (1) Hydraulic power unit (V351HPU1) Hydraulic tubing and hardware One box indicator helm control This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

Boat Leveler to Bennett Actuator Conversion Kit - Hydraulic to HydraulicBennett Marine's V351CK conversion kit replaces Boat Leveler cylinders with Bennett though-hull fittings. Kit includes: 2 hydraulic cylinders and all hardware to convert your system 2 stainless steel conversion brackets 8 1/4-20 x 1/2 machine screws 4 1/4-20 x 3/4 wood screws 2 3" pipe nipples 2 female barb fittings 2 actuators WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Owner's Manual (pdf)

Read more less

Trim Plane Assembly 10" x 12" for M120Bennett trim planes are made of high-quality 304 stainless steel and remain strong and rigid, even in the most challenging situations. Each trim plane assembly includes a trim plane, backing plate and hinge for one side of the boat.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

Bigfoot Tool Bag - SilverA durable, foldable, rectangular carrying bag with the RUPES logo prominently displayed on the side, along with the BigFoot logo. The bag is made from a robust, silver-gray fabric, designed for carrying tools, consumables, and accessories. It features a black, adjustable shoulder strap along with two short handles for versatile carrying options. The top of the bag has a zippered closure, providing easy access to the main compartment and to the other internal pockets.The front includes a small exterior pocket. The bag is designed to be foldable, making it convenient for storage or transport when not in use. This functionality makes it ideal for professionals who require flexibility in transporting and storing detailing and polishing equipment.Dimensions: Open bag: 26cm x 50cm x 27cm Folded bag: 7cm x 50cm x 27cm

Read more less

2-1/2" x 50' Ocean-Flex Multipurpose HoseThis unique marine hose can be used for a multitude of applications for both Commercial and Recreational Vessels including Fuel Fill, Feed, and Vent (Diesel & Gasoline – Type A1), Lube Oil, Wet Exhaust, Water (Vital and Non-Vital), Bilge, Coolant, Drains, and Sanitation applications. OCEAN-FLEX boasts compliance with the following standards: USCG Inspected Vessels (Title 46 CFR Sub-Chap. T), SAE J1942 (Code F, VW, NVW), USCG Type A1, SAE J1527 A1 R2, SAE J2006 R2, SAE J20R2 B, SAE J20R4 B, SAE J20R5 B, SAE J30R5, ABYC H-22, H-24, H-33 P-1, P-4, ISO 7840 A1, ISO 8469 B1, ISO 13363 2B, and CE.Provides excellent resistance to fuel, fire, heat, cold, ozone, and aging. Also provides excellent bend-ability and adheres to more standards than any other marine hose.Specifications: Construction: Tube Black Nitrile, Cover Black Nitrile Reinforcement: Multiple Textile Spirals, Dual Steel Wire Helix Temperature Range: -20°F to 212°F (-29ºC to 100ºC) Lengths: 12.5’ (3.81 m) Length, 25’ (7.62 m) Coil (4”–6”), 50’ (15.24 m) Coil (up to 3-1/2” ID.) Specifications: ID Diameter (inches): 2-1/2" Length (Feet): 50' Box Dimensions: 8"H x 33"W x 35"L WT: 68.5 lbs Quick Guide (pdf)

Read more less

Blue Silicone Wet Exhaust Hump with 4 T-Bolt Clamps - 8" ID x 8" LengthTrident Silicone Hump Hose Bellows provide the ultimate flexible connectors for marine wet exhaust systems. They offer much greater tolerance to heat, misalignment, engine movement, and vibration, with significant savings in cost, parts, labor, and space.Construction:  Tube & Cover: VHT blue silicone Color: Blue Reinforcement: Polyester reinforcement Temperature Range: 350°F (177°C) Specifications: Inner Diameter: (inch) 8" / (mm) 203.2 Outer Diameter: (inch) 8.5" / (mm) 216 Working Pressure: (Psi) 15 / (Bar) 1 *Burst Pressure is 4 x Working Pressure Specifications: ID Diameter (inches): 8" Length (Feet): 8" Box Dimensions: 11"H x 13"W x 16"L WT: 5 lbs UPC: 704917000510 Quick Guide (pdf)

Read more less

Blue Silicone Wet Exhaust Hump with 4 T-Bolt Clamps - 6" ID x 8" LengthTrident Silicone Hump Hose Bellows provide the ultimate flexible connectors for marine wet exhaust systems. They offer much greater tolerance to heat, misalignment, engine movement, and vibration, with significant savings in cost, parts, labor, and space.Construction:  Tube & Cover: VHT blue silicone Color: Blue Reinforcement: Polyester reinforcement Temperature Range: 350°F (177°C) Specifications: Inner Diameter: (inch) 6" / (mm) 152.4 Outer Diameter: (inch) 6.5" / (mm) 165 Working Pressure: (Psi) 15 / (Bar) 1 *Burst Pressure is 4 x Working Pressure Specifications: ID Diameter (inches): 6" Length (Feet): 8" Box Dimensions: 8"H x 8"W x 8"L WT: 3 lbs UPC: 704917000503 Quick Guide (pdf)

Read more less

1.5" Tall Stainless Stud w/#8 x 32 ThreadOur Small Stainless Steel Panel Studs have a wide range of uses. Originally they were used for mounting on the backside of dash panels for mounting to the console. Now they are used for securing a wide range of wire clamps and other small components to composite surfaces. The base plate is 0.62" in diameter with a 1.5" tall stud. Tensile strength is 300 lbs. and shear strength is 375 lbs. Maximum torque load is 45 inch/lbs.

Read more less

Reed Switch Fuel Sender - 660 MMMost aftermarket fuel senders use a rotating float arm and resistance cards to measure the amount of fuel in a tank which can lead to erratic pointer movements.  This revolutionary design comes with many benefits!  This is ideal for applications where a conventional swing arm will not fit due to clearance issues.  The tubular design acts as a dampener to prevent the gauge pointer from moving due to fuel slosh.  The floatless fuel sender has no side to side motion, which means it has no moving parts to wear out.  It is top mounted and utilizes the aftermarket standard SAE 5 hole mounting flange and comes complete with neoprene gasket and mounting hardware. Features: Stainless steel construction Ethanol resistant Viton gasket 240-33 Ohm range Fits tanks with a depth of 26" (660mm)  Insulated 1/4"" spade connectors Standard 5 hole mounting flange Works with most standard marine fuel gauges Ground - Floating Connection - Insulated .25" Spade  *Sold as an IndividualWARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Color: Silver Box Dimensions: 3"H x 3"W x 27"L WT: 1 lbs UPC: 754059064475

Read more less

Cockpit Marine 52mm (2-1/16") Fuel Level Gauge - Black Dial/BezelVDO Cockpit Marine offers a comprehensive modular, modern series of instruments for engine monitoring. More functions and greater flexibility in installation and design increase the scope for high manufacturing standards and guarantee the highest level of reliability and readability. As the result of ongoing research and development work, VDO Cockpit Marine gauges offer an innovative, comprehensive standard instrumentation platform.  VDO Cockpit Marine gauges provides maximum freedom to customize the cockpit and is the natural choice for an attractive price/performance ratio. Features: E - 1/2 - F range Works with all 240-33Ohm marine fuel senders For 12V electrical systems Connection: M4 Stud Dial Scale: Single Input Type: Analog Mounting Hardware: Included *Sold as an Individual WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Gauge Type: Fuel Level Series: Cockpit Marine Voltage - Input Range (Volts): 8 to 16 VDC Gauge Size: 2-1/16" Box Set: No Box Dimensions: 3"H x 3"W x 4"L WT: 0.4 lbs UPC: 754059079479 Owner's Manual (pdf)

Read more less

GatorSkinz™ Non-Skid Step Pad - Grey Grit - 16" x 4"Non-Slip traction mats for trailers, boats, and docks with 3M Adhesive System. Available in Pre-Cut 16" x 4" Step Pads or 24" wide bulk roll by the foot for custom cuts to meet the needs of your project.Features: Auto-grade polymers Unmatched adhesion & durability Trusted adhesion systems with simple peel & stick OEM & retail solutions Peel & Stick to Get a Grip! Use anywhere you need a grip in or out of the water! Grit & pebble non-skid patterns Colors: Black, White, Light Gray, and new Jon Boat Green Available in 2-pack step pads (16″ x 4″) Available in bulk – 24″W up to 100’L Uses exclusive 3M KeelShield® adhesive No curing time – No peeling or lifting edges Superior UV Stability & Lifespan Are you tired of slipping around on your boat, trailer, or jetski on the water? Has the non-skid on your product worn away or peeled off? Or do you just want to have better stability or a grip? Then GatorSkinz™ Non-Skid is right for you. GatorSkinz™ is a traction mat material made out of pure urethane featuring a pebble or grit texture. Black is available in both Grit & Pebble, with White, and Light Gray colors available in the Grit non-skid texture. An high quality and long lasting solution for boat step pads, swim platforms, ladders, etc.For OEM or custom cutting applications to fit your project, GatorSkinz Non-Skid is available in bulk rolls up to 100′ long by 24″ wide. Online and Retail you may also find GatorSkinz in a 2-pack of pre-cut boat step pads that are 16″ x 4″.GatorSkinz are easy to use and apply with our Prep-Peel-Stick application. There is no cure time, and best of all it will stay on! GatorSkinz Non-Skid comes complete with our exclusive KeelShield® adhesive system featuring the extraordinary bonding and reliability, 100,000s of clients have known for over 20 years. Specifications: Type: Misc Box Dimensions: 1"H x 5"W x 20"L WT: 0.6 lbs UPC: 604014009051

Read more less

GatorSkinz™ Non-Skid Step Pad - Black Pebble - 16" x 4"Non-Slip traction mats for trailers, boats, and docks with 3M Adhesive System. Available in Pre-Cut 16" x 4" Step Pads or 24" wide bulk roll by the foot for custom cuts to meet the needs of your project.Features: Auto-grade polymers Unmatched adhesion & durability Trusted adhesion systems with simple peel & stick OEM & retail solutions Peel & Stick to Get a Grip! Use anywhere you need a grip in or out of the water! Grit & pebble non-skid patterns Colors: Black, White, Light Gray, and new Jon Boat Green Available in 2-pack step pads (16″ x 4″) Available in bulk – 24″W up to 100’L Uses exclusive 3M KeelShield® adhesive No curing time – No peeling or lifting edges Superior UV Stability & Lifespan Are you tired of slipping around on your boat, trailer, or jetski on the water? Has the non-skid on your product worn away or peeled off? Or do you just want to have better stability or a grip? Then GatorSkinz™ Non-Skid is right for you. GatorSkinz™ is a traction mat material made out of pure urethane featuring a pebble or grit texture. Black is available in both Grit & Pebble, with White, and Light Gray colors available in the Grit non-skid texture. An high quality and long lasting solution for boat step pads, swim platforms, ladders, etc.For OEM or custom cutting applications to fit your project, GatorSkinz Non-Skid is available in bulk rolls up to 100′ long by 24″ wide. Online and Retail you may also find GatorSkinz in a 2-pack of pre-cut boat step pads that are 16″ x 4″.GatorSkinz are easy to use and apply with our Prep-Peel-Stick application. There is no cure time, and best of all it will stay on! GatorSkinz Non-Skid comes complete with our exclusive KeelShield® adhesive system featuring the extraordinary bonding and reliability, 100,000s of clients have known for over 20 years.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Type: Misc Box Dimensions: 1"H x 5"W x 20"L WT: 0.7 lbs UPC: 604014009037

Read more less

GatorSkinz™ Non-Skid Step Pad - Black Grit - 16" x 4"Non-Slip traction mats for trailers, boats, and docks with 3M Adhesive System. Available in Pre-Cut 16" x 4" Step Pads or 24" wide bulk roll by the foot for custom cuts to meet the needs of your project.Features: Auto-grade polymers Unmatched adhesion & durability Trusted adhesion systems with simple peel & stick OEM & retail solutions Peel & Stick to Get a Grip! Use anywhere you need a grip in or out of the water! Grit & pebble non-skid patterns Colors: Black, White, Light Gray, and new Jon Boat Green Available in 2-pack step pads (16″ x 4″) Available in bulk – 24″W up to 100’L Uses exclusive 3M KeelShield® adhesive No curing time – No peeling or lifting edges Superior UV Stability & Lifespan Are you tired of slipping around on your boat, trailer, or jetski on the water? Has the non-skid on your product worn away or peeled off? Or do you just want to have better stability or a grip? Then GatorSkinz™ Non-Skid is right for you. GatorSkinz™ is a traction mat material made out of pure urethane featuring a pebble or grit texture. Black is available in both Grit & Pebble, with White, and Light Gray colors available in the Grit non-skid texture. An high quality and long lasting solution for boat step pads, swim platforms, ladders, etc.For OEM or custom cutting applications to fit your project, GatorSkinz Non-Skid is available in bulk rolls up to 100′ long by 24″ wide. Online and Retail you may also find GatorSkinz in a 2-pack of pre-cut boat step pads that are 16″ x 4″.GatorSkinz are easy to use and apply with our Prep-Peel-Stick application. There is no cure time, and best of all it will stay on! GatorSkinz Non-Skid comes complete with our exclusive KeelShield® adhesive system featuring the extraordinary bonding and reliability, 100,000s of clients have known for over 20 years. Specifications: Type: Misc Box Dimensions: 1"H x 5"W x 20"L WT: 0.65 lbs UPC: 604014009044

Read more less

GatorSkinz™ Non-Skid Step Pad - Black Grit - 12" x 24"Non-Slip traction mats for trailers, boats, and docks with 3M Adhesive System. Available in Pre-Cut 16" x 4" Step Pads or 24" wide bulk roll by the foot for custom cuts to meet the needs of your project.Features: Auto-grade polymers Unmatched adhesion & durability Trusted adhesion systems with simple peel & stick OEM & retail solutions Peel & Stick to Get a Grip! Use anywhere you need a grip in or out of the water! Grit & pebble non-skid patterns Colors: Black, White, Light Gray, and new Jon Boat Green Available in 2-pack step pads (16″ x 4″) Available in bulk – 24″W up to 100’L Uses exclusive 3M KeelShield® adhesive No curing time – No peeling or lifting edges Superior UV Stability & Lifespan Are you tired of slipping around on your boat, trailer, or jetski on the water? Has the non-skid on your product worn away or peeled off? Or do you just want to have better stability or a grip? Then GatorSkinz™ Non-Skid is right for you. GatorSkinz™ is a traction mat material made out of pure urethane featuring a pebble or grit texture. Black is available in both Grit & Pebble, with White, and Light Gray colors available in the Grit non-skid texture. An high quality and long lasting solution for boat step pads, swim platforms, ladders, etc.For OEM or custom cutting applications to fit your project, GatorSkinz Non-Skid is available in bulk rolls up to 100′ long by 24″ wide. Online and Retail you may also find GatorSkinz in a 2-pack of pre-cut boat step pads that are 16″ x 4″.GatorSkinz are easy to use and apply with our Prep-Peel-Stick application. There is no cure time, and best of all it will stay on! GatorSkinz Non-Skid comes complete with our exclusive KeelShield® adhesive system featuring the extraordinary bonding and reliability, 100,000s of clients have known for over 20 years. Specifications: Type: Misc Box Dimensions: 5"H x 5"W x 12"L WT: 0.95 lbs UPC: 604014009136

Read more less

Electronic Ignition Assembly - 10-960-KReplacement igniter and electrode.  Battery powered. Compatible With:  A10-207-3  A10-207-3-CSA A10-207-3AU-1  A10-207-3AU-3 A10-207-3CE-2  A10-207-3NZ-3  A10-217-3, A10-217-3-CSA  A10-217-3AU-1  A10-217-3AU-3  A10-217-3CE-2 *Sold as an Individual 

Read more less

50A 125V/250V CordsetEEL ShorePower CordsetsOne Hand. A simple twist. Full Power.The EEL (Easily Engaged Lock) ShorePower Cordset has an industry first, jaw-clamp design providing one-handed operation and a secure waterproof seal which completely eliminates the need for a locking ring. The EEL connection is built for the harshest environments and is UL approved. This easy-to-use cordset features a built-in cord light which serves as an alert to boaters when the cord is left plugged in. And, best of all, it works with your current inlet. In addition to cordsets with the EEL System, Marinco also has a full set of Pigtail and Y adapters all using the new EEL technology.Features: Designed for use with standard inlets (NEMA)50A, 125V/250V capacities; 50' length Cord sets meet global industry standards including ABYC and UL New wing-clamp technology provides a true, watertight connection every time Single-handed operation Eliminates the need for a sealing ring Secondary locking feature for added security Built-in LED cord light guides you to a secure connection every time, even in the dark WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Voltage: 125/250v Type: Cordset Length: 50' Amperage: 50a Box Dimensions: 8"H x 18"W x 20"L WT: 45 lbs UPC: 093344051746 Owner's Manual (pdf)

Read more less

Primer-207 - Pigmented, Solvent-Based Primer for Various SubstratesSika® Primer-207 is a solvent-based black primer that reacts with moisture and forms a thin layer. This layer acts as a link between substrates and adhesives.Sika® Primer-207 is specifically formulated for the treatment of bond faces prior to the application of Sika’s 1-component polyurethanes. This primer might provide excellent adhesion without a previous activation step on many substrates. Sika® Primer-207 fluoresces under long-wave UV light for a limited period of time. This feature is used for in-process control.Usage:Sika® Primer-207 is used to improve adhesion on a very broad range of different substrates, such as float glass, ceramic-coated glass, plastics, pre-coatings, painted surfaces, E-coats, and metals.Seek the manufacturer’s advice and perform tests on original substrates before using Sika® Primer-207 on materials prone to stress cracking. This product is suitable for experienced professional users only. Tests with actual substrates and conditions have to be performed to ensure adhesion and material compatibility. Application:Shake the Sika® Primer-207 can very thoroughly until the mixing balls rattle freely. Continue shaking for another minute and apply a thin but covering coat with a brush, felt, or foam applicator.Ideal application and surface temperatures are between 15 °C and 25 °C.Sika® Primer-207 has to be applied only once. Care must be taken to ensure that this single application gives adequately dense coverage. Consumption and method of application depend on the specific nature of the substrates. Tightly reseal the container immediately after each use.Features: Enhanced adhesion on a wide variety of substrates Visible under UV light Easy to use Quick Guide (pdf)Owner's Manual (pdf)

Read more less

100A Plug - 125/250V Mate with M4100R12 receptacle.Features: Mate with M4100R12 Recptacle For use with 100A 125/250V shore power cordsets WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Plugs Box Dimensions: 5"H x 6"W x 15"L WT: 3.5 lbs UPC: 093344500404

Read more less

All-Off Hull & Bottom Cleaner - GallonFeatures: Instantly removes waterline, algae, rust, and gas exhaust stains from your boat's bottom and hull areas Softens barnacle rings and zebra mussels for easy removal No scrubbing necessary Will not harm fiberglass 1 Gallon

Read more less

Troll-Tamer™ for Minn Kota Terrova & MotorGuide Trolling Motor Stabilizer Lock 8"-12" SpacingThe Troll-Tamer™ Trolling Motor Stabilizer Lock is designed to securely hold the trolling motor in place to prevent damage to the trolling motor and boat. No more worries about inadequate hold down devices, the Troll-Tamer™ Trolling Motor Stabilizer Lock has been designed and tested in the nastiest conditions by top touring pros. The Troll-Tamer™ Trolling Motor Stabilizer Lock is machined from 300 Series Stainless Steel and assembled to endure even the roughest conditionsThe latest models, RMC-108-DP and RMC-109-DP feature a clamp on shaft bracket to work with the latest in digital, wireless bow mount trolling motors, including Minn Kota Terrova, Auto Pilot, Riptide models & Motor Guide Xi5.

Read more less

Tip Top Teak Deck Brightener - Quart - *Case of 12*Tip Top Teak Crystal Deck Brightener is our answer to dull grey teak. Our Deck Brightener is specially designed and formulated to restore the light, beautiful look of new teak.Features: Brightens Teak dulled by weather and wear Won't raise the grain Contains no Bleach Cleans away discoloration in the deck For over 30 years Tip Top Products has been producing quality products for the care and protection of your marine craft. Our Tip Top Line has always been known as the choice of yachtsmen and boaters around the world, and our Wood -Oil Sealer has been proven time and again to be the premium sealer in the world. We are continuing to strive toward giving our customers the highest quality products at a fair price and are designed to be "Simply the Best". Specifications: Type: Teak Box Dimensions: 2"H x 5"W x 8"L WT: 31.2 lbs

Read more less