30A 125V Sealing Collar with Threaded RingThis sealing collar provides maximum moisture protection between the cordset and adapter. Designed for use with 20 and 30 amp locking systems. At Marinco, we make electrical products that stand up to the harshest environments. Every product we make is designed to withstand the rigors of life at sea.WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Misc Box Dimensions: 2"H x 3"W x 3"L WT: 0.15 lbs UPC: 093344003509

Read more less

ATLAS™ Hydraulic Gauge Kit for 6", 10", 12" & 14" ATLAS™ Jack Plate - Black BezelDigital LED Position Gauge for Atlas™ Hydraulic Jack Plates Features: All Digital Readout Black Face and Stainless Steel Face Gauges Available Outer Bezel available in Stainless Steel or Black Polymer Each Number Indicates 1/4” Rise Numbered from 0 to 20 All ATLAS™ Jacks are pre-drilled to Fit See pictures to the right to view both styles WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Prop Master Propeller WrenchThe Prop Master™ is the original molded propeller wrench.This 1-1/16" six point socket style prop wrench is made of high tensile strength, indestructible nylon. It is totally resistant to fuel, sun, salt water, and other chemicals. The Prop Master™ is less expensive than metal wrenches which rattle and can cause damage to your boat. However, it has plenty of brawn to get the job done. The Prop Master™ will tighten all 1 1/16" propeller nuts without slipping or stripping. (OMC, Johnson and Evinrude, - over 40 HP, Mercury - over 50 HP) High visibility color makes it easy to locate in dark boat compartments. The Prop Master™ also has a 9/16" garboard drain plug socket on the reverse side. Will not corrode in the salt water environment.Features: Fits All 1-1/16” Prop Nuts (40hp & up) Rugged Nylon Resists Stripping 9/16” Garboard Drain Socket on Back Non-Corrosive in Salt Environment High Visibility Yellow makes wrench easy to find WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Pitch: N/A Material: Polymer Diameter (Inches): 0.6875 Box Dimensions: 2"H x 6"W x 16"L WT: 0.6 lbs UPC: 733572020007

Read more less

Actuator Caps, Position Sensors & 30' CableActuator Upper Hinge with Coil – PortWARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

Reverse "Y" AdapterThe Reverse "Y" Adapter has two male plugs with special power isolation circuitry for added safety. When one plug is connected to a receptacle, the circuitry isolates the second plug. The reverse "Y" provides 50A 125/250V power when only two 30A 125V receptacles are available. Note: Reverse "Y" will NOT work with 50A, 125V, 3-wire inlets. Power is provided in both circuits to the 4-wire inlet, but the dock side receptacles limit the current in each circuit to 30A. The two 30A 125V receptacles must be supplied from a single power source providing from 208V to 250V between them for proper operation. Boat Side: Female Connector 50A 125/250V w/Sealing Collar System Attaches to boat inlet or cordset Dock Side: Male Plug 2-30A 125V Locking Attaches to dockside receptacle or cordset WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Y-Adapter Box Dimensions: 5"H x 12"W x 13"L WT: 7.4 lbs UPC: 093344501357 Quick Guide (pdf)

Read more less

Aquazorber™ Drying MopThe Aquazorber™ Drying Mop is a top-of-the-line drying mop made from imported material featuring 2" wide die-cut strips for maximum absorbency. Aquazorber mops are designed for drying decks and painted and fiberglass surfaces quickly and easily. Material is not affected by mold, mildew, cleaning chemicals, or fuel. Aquazorber mops are stored in their reusable tube so your mop is ready to dry when you need it. A protective end cap prevents damage to decks, paint, and fiberglass. Aquazorber Mops are recommended for drying, not cleaning or scrubbing, especially on non-skid surfaces. Specifications: Type: Tools & Accessories Box Dimensions: 3"H x 3"W x 22"L WT: 0.85 lbs UPC: 633590313153

Read more less

G-Force ELIMINATOR Red Prop Nut for Garmin Force Trolling MotorOne of the latest products in the G-Force lineup is the ELIMINATOR Prop Nut. The ELIMINATOR Prop Nut is built to make your trolling motor perform better, longer, and quieter. Designed to lessen prop noise and vibration, The ELIMINATOR Prop Nut stabilizes the prop by providing a larger contact point. In addition, it acts as a heat sink and has built-in cooling ports that reduce the operating temperature for a longer battery and trolling motor life. Made to fit Garmin Force trolling motors. This specific part comes in red color to provide a sleek, matching aesthetic. Factory nut and washer will have to be removed prior to installing Eliminator, also if you have an anode it will have to be removed as well to use the Eliminator.Make sure that you're getting the most out of your trolling motor with the ELIMINATOR Prop Nut.Key ELIMINATOR Benefits: Machined from 6061 Billet Aluminum O-ring dampens noise/vibration and secures the nut Wider contact area for a more stable prop Cooling ports aid in heat dissipation Anodized protected No tools needed Available in popular colors Visually appealing Designed and made in the U.S.A. Patent pending

Read more less

Quick Flush Kit for OMC OutboardsProvides a quick and easy way to flush any outboard equipped with a flushing port. No more removing the plug and twisting the hoses to flush. Replace the plug with the Quick Flush™ and snap the hose on and off. Normal operating water pressure keeps the valve sealed when using the engine. Features: Makes flushing outboard quick and easy Unique previously patented slide valve replaces the outboard flushing port plug The O-ring seal closes off the port when operating the engine Quick connect on hose snaps onto valve for flushing No plug to remove and no difficulty turning of hose into the port Takes the hassle out of flushing your outboard Fits all outboards equipped with a flushing port Kit consists of slide valve, hose quick connector, and washer WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Service Kits Box Dimensions: 2"H x 4"W x 7"L WT: 0.1 lbs UPC: 733572010602

Read more less

3" x 36" Blue Silicone Wet Exhaust HoseTrident Silicone Marine Wet Exhaust Hose gives the best performance with a cool quiet elegance. Silicone naturally handles higher temperatures and will last longer than rubber exhaust hoses. The silicone will also transfer less heat into the engine room. The 202V series Silicone Wet Exhaust products are designed for short straight connections and come with a 10-year warranty.Trident Silicone Marine Wet Exhaust & Water-Coolant Hose is the ultimate in extra thick soft wall silicone quality with very high temp. performance and extra long service life. Exceeds SAE J2006-R1, and ABYC & NMMA P-1 exhaust standards. #202V Glossy Blue “Very Hi Temp” has 4-6 ply polyester reinforcement and 350°F (177°C) Max. Used worldwide on premium boats, yachts, and special service vessels. It has become the super yacht standard.Specifications: 10-year warranty Tube & Cover: High-temp silicone Color: Blue Reinforcement: Polyester reinforcement Temperature Range: 350°F (176.7°C) Lengths: 3’ (.914m), 6’ (1.83m), 12’ (3.66m) *Burst Pressure is 4 x Working Pressure*All wet exhaust hose to be used on open-ended systems Specifications: ID Diameter (inches): 3" Length (Feet): 3' Box Dimensions: 4"H x 4"W x 36"L WT: 3 lbs UPC: 704917003092 Quick Guide (pdf)

Read more less

Pontoon PowerDrive™ 70 Trolling Motor with Foot Pedal - 24V - 70LB - 48"Put Minn Kota power to work on your pontoon. You get a quiet, steady, all-day performance that's right for you. And with quick and easy mounting, you get a motor that's built to let you sit back and appreciate a perfect day on the lake.Deploy-Assist LeverGet in and out of the water easily. Just depress the lever to deploy your trolling motor and when it's time to move, it stows easily and securely.Aluminum Quick Release BracketQuickly, easily remove your motor with this aluminum bracket. It comes standard on PowerDrive Pontoon models and features a quiet, secure locking system.PowerDrive Foot PedalControl speed, steering, and momentary and constant on/off with the PowerDrive foot pedal, which is waterproof and features an 18' cord. Not included on GPS-enabled models.Push-to-Test Battery MeterPress a button to get an instant "stage of charge" reading.Digital Maximizer™Provides up to 5 times longer run time on a single battery charge. These variable-speed trolling motors let you dial in your exact speed, and they deliver only as much power as you need, helping to conserve your battery for a full day of fishing.Power PropDelivers extra power to push through any fishing scenario and excels in open water.Indestructible Composite Shaft — Guaranteed for LifeAt the core of your Minn Kota trolling motor is an indestructible composite shaft. It's a Minn Kota exclusive, and they guarantee it for life.Cool, Quiet PowerEvery Minn Kota lower unit runs cool to extend trolling motor life and stays quiet.What's IncludedPontoon PowerDrive 70 lb. 48" Foot-Control Motor, Corded Foot Pedal, MKP-37 Prop, MKA-16-03 Quick Release Bracket and Mounting HardwareSpecifications: For Use In: Freshwater Shaft Length (inch): 48" Max Thrust (pounds): 70 lbs. Voltage: 24 One-Boat Network Compatible: No QUEST Series: No Spot-Lock: No Built-In Sonar: None Foot Pedal Style: Side-to-Side / Electric Control: Foot Pedal Auto/Stow Deploy: No Power Trim: No Power Steering: Yes Lift-Assist: No Bowguard: No Wireless Remote: No i-Pilot Link (GPS): No i-Pilot (GPS): No AutoPilot: Yes CoPilot: No Speeds: Variable Digital Maximizer: Yes Battery Meter: Yes Max Amp Draw: 42 Mount Style: Bolt-on Mounting Location: Bow-mount  Motor Style: Electric-steer Prop: Power Prop (MKP-37) Warranty: Two-Year Warranty Specifications: Autopilot: Yes Built-In Transducer: No Control Type: Foot Control Included Propeller: MKP-37 Mounting Style: Bow Salt Water/Fresh Water: Fresh Series: PowerDrive Shaft Length (Inches): 48" Thrust (Pounds): 70 lbs Voltage - Input Range (Volts): 24v Box Dimensions: 10"H x 17"W x 62"L WT: 48.7 lbs UPC: 029402051021 Owner's Manual (pdf)

Read more less

Poly-Flex II Universal Leaning Post Cover - 47"H x 41"W x 24"D - Grey*Measurements - 47"H x 41"W x 24"DIncludes 1/4″ strong and durable shock cord encased in the hem & heavy-duty attached adjustable strap system for a more customized fit. Available in 1 size in Sunbrella®, Performance Poly-Guard® & Sun-DURA®, our toughest marine grade polyester fabrics.Poly-Flex IIGood QualityEconomically-priced 5.3 oz. Solution-Dyed Marine Polyester with urethane coating. Lightweight and strong. Good resistance to tearing. Durable water repellency, UV and mildew resistant finish. Breathable to help allow interior moisture to escape. Designed and sewn in the USA. (3 Year Limited Warranty).*For storage and mooring only. Not recommended for trailering. Specifications: Color: Grey Cover Type: Seat Box Dimensions: 6"H x 10"W x 12"L WT: 2.55 lbs UPC: 194092553480

Read more less

CAM-PT-150-02 Aluminum PowerTower® for Cameras - 6"The ingenious Camera Power Mount solves the problem of finding a level mounting surface to install cameras onto your powerboat, commercial vessel, RIB or sailboat wheelhouse.Compatible with: FLIR - M100 / M200, M132, M232 cameras IRIS s118, s290, s295, s390, s395, s418 cameras Features: Designed to fit the most up to date cameras Pre-drilled mounting holes allow the camera to fasten straight to the PowerTower® No need to cut the cameras connectors off for installation  Constructed from Marine grade Aluminium Technical Specifications: Material - Aluminium Height - 5.91" (150mm) Mounting Type - Aft leaning - 25° In the Box: Mount Mounting hardware (excluding screws/bolts)  Installation manual *Sold as an Individual Specifications: Construction: Powder Coated Aluminum Type: Aft Leaning Mount Height: 6 Box Dimensions: 8"H x 8"W x 8"L WT: 5 lbs UPC: 5060114796171 Quick Guide (pdf)

Read more less

16" x 24" Deluxe Sewn 50 Star FlagThese deluxe sewn flags are constructed from lightweight yet durable fade resistant polyester fabric, which make them the perfect all-weather flags.Features: Individually Sewn Stripes Embroidered Stars Brass Grommets Four-Needle Flyend Specifications: Type: Flags & Flag Poles Box Dimensions: 1"H x 5"W x 8"L WT: 0.2 lbs UPC: 040011954244

Read more less

5-Gallon Black Bucket Detailers KitWhat's Included? 2lb Quart/Can Polish Paste 16oz Spray Bottle Speedi Seal Dual-Sided Hand Applicators Super Mini 2" Buff Ball, Mini 3" Buff Ball, Large 5: Buff Ball, X-Large 7" Buff Ball 12" x 12" Grey Tearaway Roll 16oz Spray Bottle Lime Remover 5 Gallon Round Black Bucket with Black Seat and Lid 16oz Bottle Liquid Metal Polish Brochure (pdf)

Read more less

Recon™ Quick Release Bracket - HD Composite - BlackRemoving the trolling motor from a boat is quick and easy with the Heavy-Duty Composite Quick Release Bracket. Compatible with all Lowrance electric steer trolling motors and most non-Lowrance electric steer motors. The trolling motor is fastened securely to the boat with the bracket’s locking U-bar design, and a security locking point is available for use with a padlock (sold separately). Features: Compatible with all Lowrance electric steer trolling motors and most non-Lowrance freshwater electric steer motors Locking the U-bar secures the trolling motor to the baseplate Designed for use in freshwater environments Available security locking point for use with padlock (sold separately)

Read more less

CP 325 Medium-High Adhesion Masking Tape - 24MM x 55M x 12-Pack - Pink - Rated for 325°FPerformance grade, medium-high adhesion masking tape for use in moderate temperatures in the transportation and metal fabrication industries. For use in temperatures up to 325 F (for up to 30 minutes), FrogTape® 325 Pink is a user-friendly, durable solution that delivers sharp paint lines, clean removal, and consistent unwinding in various industrial applications and environments.Features: Excellent adhesion to metal, rubber, plastic, anodized aluminum, chrome and fiberglass Resistant to water, salt water, various solvents and abrasives Compatible with gel coats, multi-part epoxy topcoats, and antifouling bottom paints for marine applications, as well as solvent-based and waterborne, aqueous paints and coatings for automotive Resistant to water, various solvents and gel coats Residue-free removal Temperature-resistant up to 325 F (for up to 30 minutes) Remove tape at room temperature (70 F +/- 10 F) after baking Technical Specifications: Tape Width - 24MM (.94") Roll Length - 55M (60 yds) Adhesive - Rubber-based adhesive Adhesion to Stainless Steel - 34 oz/in width Elongation - 12% Service Temperature Range - 40°F to 325°F (up to 30 minutes) Tensile - 25 lbs/in width Thickness - 6.4 mils Quick Guide (pdf)Brochure (pdf)

Read more less

CP 250 Medium-High Adhesion Masking Tape - 48MM x 55M x 6-Pack - Light Blue - Rated for 250°FPerformance grade, medium-high adhesion masking tape for use in moderate temperatures in the transportation and metal fabrication industries. For use in temperatures up to 250 F (for up to 30 minutes), FrogTape® 250 Light Blue is a user-friendly masking solution that delivers consistent paint lines, clean removal, and conformability in various industrial applications and environments.Features: Excellent adhesion to metal, rubber, plastic, anodized aluminum, chrome and fiberglass Resistant to water, salt water, various solvents and abrasives Compatible with gel coats, multi-part epoxy topcoats, and antifouling bottom paints for marine applications, as well as solvent-based and waterborne, aqueous paints and coatings for automotive Resistant to water, various solvents and gel coats Residue-free removal Temperature-resistant up to 250 F (for up to 30 minutes) Remove tape at room temperature (70 F +/- 10 F) after baking Technical Specifications: Tape Width - 48MM (1.88") Roll Length - 55M (60 yds) Adhesive - Rubber-based adhesive Adhesion to Stainless Steel - 32.5 oz/in width Elongation - 10% Service Temperature Range - 40°F to 250°F (up to 30 minutes) Tensile - 24 lbs/in width Thickness - 6.2 mils Quick Guide (pdf)Brochure (pdf)

Read more less

CP 250 Medium-High Adhesion Masking Tape - 18MM x 55M x 12-Pack - Light Blue - Rated for 250°FPerformance grade, medium-high adhesion masking tape for use in moderate temperatures in the transportation and metal fabrication industries. For use in temperatures up to 250 F (for up to 30 minutes), FrogTape® 250 Light Blue is a user-friendly masking solution that delivers consistent paint lines, clean removal, and conformability in various industrial applications and environments.Features: Excellent adhesion to metal, rubber, plastic, anodized aluminum, chrome and fiberglass Resistant to water, salt water, various solvents and abrasives Compatible with gel coats, multi-part epoxy topcoats, and antifouling bottom paints for marine applications, as well as solvent-based and waterborne, aqueous paints and coatings for automotive Resistant to water, various solvents and gel coats Residue-free removal Temperature-resistant up to 250 F (for up to 30 minutes) Remove tape at room temperature (70 F +/- 10 F) after baking Technical Specifications: Tape Width - 18MM (.70") Roll Length - 55M (60 yds) Adhesive - Rubber-based adhesive Adhesion to Stainless Steel - 32.5 oz/in width Elongation - 10% Service Temperature Range - 40°F to 250°F (up to 30 minutes) Tensile - 24 lbs/in width Thickness - 6.2 mils Quick Guide (pdf)Brochure (pdf)

Read more less

Marine Quick Wax - 32oz303 Quick Wax is the fastest solution for making your boat shine.  This formula is a gentle cleaner that helps remove water spots, dust, and other debris from the hard surfaces on your boat, and it leaves a protective layer that helps repel these elements during your next trip out on the water.  It also contains superior UV protection that lasts up to 30 days, preventing color fading.  303 Quick wax contains Carnauba wax.Features: The fastest boat wax solution for making your boat shine Long lasting, water spot preventing spray on boat wax Marine safe wax that gently cleans and leaves a protective glossy shine Provides UV Protection that prevents color fading Made in the U.S.A. *Sold as an Individual WARNING: This product can expose you to chemicals including benzene which is known to the State of California to cause cancer, birth defects or other reproductive harm, and Ethylbenzene which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov. Specifications: Type: Waxes & Polishes Box Dimensions: 3"H x 5"W x 12"L WT: 2.25 lbs UPC: 082043302136

Read more less

Get the power you need to push through the thick stuff with the Power Prop. Fits 3-1/4" (MKP-2) and 3-5/8" (MKP-25) diameters.WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

APEX Surface Mount for Starlink Standard Gen 3 Antenna - BlackThe Seaview APEX APXG3DMV2 is a direct surface mount kit tailored for the Starlink Standard Gen 3 Antenna, specifically engineered for the demanding marine environment. Its suitability for marine conditions makes it perfect for any other outdoor use, such as on RVs, overland vehicles, vans, jeeps, UTVs, trucks, and more. The design incorporates a slight angle to the Starlink antenna to facilitate moisture runoff.The two end caps are crafted from machined marine-grade high-density polyethylene, offering an exceptional finish and corrosion resistance. These end caps are secured to black hard-anodized aluminum strips, providing superior strength to firmly hold the Gen 3 antenna on any flat surface.The Starlink Standard Gen 3 antenna now features a convenient pressure-fit kickstand for placement on flat non-mobile surfaces. However, when mounting to a vehicle or other fast moving vessel, it necessitates additional support. Opting for the Seaview APXG3DMV2 mount is a superior choice, offering a reliable and easily assembled mounting solution.The APXG3DMV2 also includes one of Seaview's CG2090W horizontal cable seals for waterproof cable entry. This seal can be placed either beneath the antenna or externally, depending on your needs. Specifications: Type: Mounting Brackets Box Dimensions: 4"H x 4"W x 26"L WT: 4.2 lbs UPC: 850047035981

Read more less

5" Modular Mount FWD Raked 7" x 7" Base Plate - Top Plate RequiredThis Seaview Modular Radar Mount works with 18" - 24" closed dome radars. The modular design allows you to add various accessories and different top plates at any point, thus making it a cost effective choice. Modular Top PlateA Seaview Modular Top Plate is required to mount a radar, satellite dome, camera or search light, and is sold separately.Modular DesignThe modular design allows the user to not have to replace the entire mount when a different radar or satdome is used. Instead the user can just replace the top plate.Compact DesignSpecifically designed to not take up a large amount of space results in the perfect solution where space saving is a must. Specifications: Type: Forward Leaning Mount Height: 5" Box Dimensions: 7"H x 12"W x 12"L WT: 5.9 lbs UPC: 839662008938 Quick Guide (pdf)

Read more less

Starlink Performance Gen 3 Adapter Plate for Use with Seaview or Starlink Angled Wedge Base - WhiteThe Seaview ADASPG3AP adapter plate has been specifically designed to securely mount the Starlink Performance Gen 3 Antenna to the angled wedge base originally used for the Starlink Performance Gen 2 (formerly the Flat High Performance antenna).*Note this is the adapter plate only, the angled wedge base and Starlink antenna are not included.*This adapter plate has pre-drilled mounting holes and threaded inserts to easily adapt the new Starlink Performance Gen 3 to Starlink's grey angled wedge base or Seaview's angled wedge base (SVSLWB & SVSLWBBLK).

Read more less

Performance Gen 3 Starlink Antenna Mount with 8 Degree Wedge Base - BlackThe Seaview SRM300WB8 surface mount for the Starlink Performance Gen 3 Antenna has been specifically designed for the harsh marine environment. If it's good for the marine environment, then it's ideal for any other outdoor application (RVs, overland vehicles, vans, jeeps, side-by-sides, UTVs, trucks, etc.).The SRM300WB8 kit includes a Starlink Performance Gen 3 adapter plate (ADASPG3AP) and an 8° wedge base (SVSLWB). The wedge base has pre-drilled mounting holes for easy hardware fastening and is drilled and tapped for the included CG30PW cable seal, ensuring a watertight and secure installation without the need to cut Starlink connectors.The aluminum wedge base has a 3-part polyurethane prime and powder coat to ensure the best possible finish and corrosion resistance.

Read more less

Starlink Performance Gen 3 Adapter Plate for Use with Seaview or Starlink Angled Wedge Base - BlackThe Seaview ADASPG3AP adapter plate has been specifically designed to securely mount the Starlink Performance Gen 3 Antenna to the angled wedge base originally used for the Starlink Performance Gen 2 (formerly the Flat High Performance antenna).*Note this is the adapter plate only, the angled wedge base and Starlink antenna are not included.*This adapter plate has pre-drilled mounting holes and threaded inserts to easily adapt the new Starlink Performance Gen 3 to Starlink's grey angled wedge base or Seaview's angled wedge base (SVSLWB & SVSLWBBLK).

Read more less

Gen 3 Standard Starlink Antenna Mount with 8 Degree Wedge Base - BlackThe Seaview SRM200WB8 Mount for the Gen 3 Standard Starlink Antenna (sometimes Gen 4 / Standard) has been specifically designed for the harsh marine environment. If it's good for the marine environment, then it's ideal for any other outdoor application (RVs, overland vehicles, vans, jeeps, side by side, UTV, trucks, etc.). The base aluminum plate has a 3-part polyurethane prime and powder coat, and the end pieces are made using machined marine-grade high-density polyethylene to ensure the best possible finish and corrosion resistance.The Gen 3 Standard Starlink Antenna (sometimes Gen 4 / Standard) features a convenient pressure-fit kickstand for placement on flat non-mobile surfaces. However, for marine or vehicle mounting, it necessitates additional support. Opting for the Seaview SRM200WB8 mount is a superior choice, offering a reliable and adaptable mounting solution. Wedge Base Features: Designed to fit the Starlink Flat High-Performance Antenna and Seaview SRM200W Mount for the Gen 3 Standard Starlink Antenna.  Pre-drilled mounting holes allow the hardware to fasten directly to the wedge. Drilled and tapped for the CG30PW (white) or CG30PB (black) cable seal that comes with each Seaview wedge base. No need to cut the Starlink connectors for installation. Available in white or black

Read more less

Sikaflex® 291 LOT - White - 3oz Tube with NozzleSikaflex®-291 LOT is a 1-component, marine-grade polyurethane elastomeric adhesive, and sealant. It is a moisture-cured, non-sag system designed with a long open time for jobs that require more time.Features: Use above and below the waterline Resists saltwater Paintable and sandable Usage:General all-purpose, high strength marine sealant, which may be used for light-duty bonding with long open time capability for humid climates or jobs requiring more time that remains permanently elastic.Advantages: Use above and below the waterline Resists saltwater Paintable  and sandable Excellent bond   NSF approved for potable water USDA approved for incidental food contact Quick Guide (pdf)Brochure (pdf)

Read more less

52MM (2-1/16") OceanLink Rudder Angle Gauge - Left/Right - Black Dial & BezelOceanLink 52 mm Vessel Status Gauges are connected directly to any OceanLink Master unit using the patented EasyLink serial bus connection.  Up to 16 EasyLink gauges for each Tachometer or GPS Speedometer can be daisy-chained together.  Interchangeable bezel option. Features: AMP Superseal Easylink 270° pointer deflection angle Reverse polarity protection Anti-fog double lens Front & rear protection rating IPX5 Operating temperature range -20 °C / +70 °C Nominal voltage - 12/24V Hole diameter - 52MM In the Box: Gauge Bezel Rubber Seal Spinlock Installation Instructions Safety Instructions *Sold as an IndividualWARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Box Set: No Gauge Size: 2-1/16" Voltage - Input Range (Volts): 12/24 V Gauge Type: Rudder Angle Series: OceanLink Box Dimensions: 4"H x 5"W x 5"L WT: 0.35 lbs UPC: 7640178721449

Read more less

Serious Marine Clearner (SMC) - 32ozSMC is a scientifically formulated multipurpose, multisurface cleaner.Surfaces: Fiberglass Vinyl Carpet Rubber Teak Acrylic Canvas Purposes: Black Streaks Vinyl Seating Exhaust Stains Bilges Carpet Stains Wheel & Rims Fish Blood and more... Eliminate the need to use numerous cleaners; SMC does it all!32oz SMC comes in a ready to use trigger spray bottle. Specifications: Type: All Purpose Box Dimensions: 3"H x 5"W x 11"L WT: 2.35 lbs UPC: 703485120149

Read more less

Hose NozzleSoft, black vinyl with finger grips, hold-open clip and stainless steel spring.The ergonomically-shaped, die-cast zinc hose nozzle body has a soft, black, vinyl grip for a comfortable hold. It includes a hold-open clip for a constant water flow and has a stainless steel spring. Specifications: Type: Tools & Accessories Box Dimensions: 2"H x 5"W x 8"L WT: 0.45 lbs UPC: 703485002889

Read more less

SHUR-LOK HANDLES"One Handle Does It All"30" Fixed Length HandleShurholds exclusive SHUR-LOK quick release system positively locks any Shurhold handle quickly and easily with all Shurhold accessories. The SHUR-LOK design guarantees that Shurhold attachments will never spin or pop off during use. Specifications: Type: Tools & Accessories Box Dimensions: 1"H x 1"W x 30"L WT: 0.5 lbs UPC: 703485407301

Read more less

Platinum 2" Water Temp Gauge (100-250°F)Faria Beede’s Platinum Series Instruments feature spun aluminum gauge dials with custom graphics and a polished stainless steel bezel providing a rugged, elegant look.  All Platinum Series gauges feature Faria's revolutionary domed glass Fog-Resistant lens. These lenses shed condensation and resists scratching and other types of fouling common in the marine environment.  A temperature gauge operates by sending a low amperage current through the gauges meter to ground via a sending unit with variable resistance. The resistance of the sending units increase or decrease with the changes in pressure, temperature, etc...As the sender's resistance varies, the amount of current allowed to flow through it to ground changes and the meter deflects, showing the temperature.2" - Hole Size: 2.0625" (53mm)Specifications: Domed Glass Anti-fog, Scratch Resistant Lens Stainless Steel Bezel Blue LED Illuminating around the Perimeter of the Dial Illuminated Backlit Fire-Orange Tip Pointer Factory P/N GP5084*Sold as an Individual*Gauge Cover not IncludedThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Gauge Type: Water Temperature Gauge Size: 2" Box Set: No Voltage - Input Range (Volts): 12/24 V Series: Platinum Box Dimensions: 3"H x 4"W x 4"L WT: 0.3 lbs UPC: 759266220171 Brochure (pdf)

Read more less

Platinum 2" Fuel Level Gauge (E-1/2-F)Faria Beede’s Platinum Series Instruments feature spun aluminum gauge dials with custom graphics and a polished stainless steel bezel providing a rugged, elegant look.  All Platinum Series gauges feature Faria's revolutionary domed glass Fog-Resistant lens. These lenses shed condensation and resists scratching and other types of fouling common in the marine environment.  Fuel Level gauge operates by sending a low amperage current through the gauges meter to ground via a sending unit with variable resistance. The resistance of the sending units increase or decrease with the changes in pressure, temperature, etc...As the sender's resistance varies, the amount of current allowed to flow through it to ground changes and the meter deflects, showing the level of fuel.2" - Hole Size: 2.0625" (53mm)Specifications: Domed Glass Anti-fog, Scratch Resistant Lens Stainless Steel Bezel Blue LED Illuminating around the Perimeter of the Dial Illuminated Backlit Fire-Orange Tip Pointer Factory P/N GP5088*Sold as an Individual**Gauge Cover not IncludedThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Gauge Size: 2" Box Set: No Voltage - Input Range (Volts): 12/24 V Series: Platinum Gauge Type: Fuel Level Box Dimensions: 4"H x 4"W x 5"L WT: 0.3 lbs UPC: 759266220218 Brochure (pdf)

Read more less

Thruster Joystick Panel ControllerControl your Lewmar bow thruster using the joystick panel.Compatible with: Lewmar 110TT Lewmar 140TT Features: Plug 'n' Play connection from joystick to Thruster means dual station control is possible On/Off illumination Easy installation connection *Sold as an Individual

Read more less

Mirror/Bracket Kit with VR-140 Elite Mirror & ZXR-320 (Silver)The 6" x 20" VR-140 ELITE offers unparalleled viewable range and clarity via prescription grade optics.  For the first time ever, the boat driver can follow a skier or wakeboarder from port to starboard inside of one uninterrupted, high-definition, high-resolution mirror. The ZXR-320 Windshield Mounted Pivoting Mirror Bracket provides a secure windshield mount for the VR-140 Series Panoramic Mirrors.  The patent-pending design accommodates most new windshield trims and the multi-position, full-metal locking mechanism provides a new standard for rigidity in rough waters.  The lock system is made from hardened stainless steel aerospace alloys for years of reliable service.  It fits all current model PCMW Windshields.In the Box: VR-140 Elite (Black) ZXR-320 Mirror Bracket (Silver) Ultra-High Bond, Pressure-Sensitive Adhesive  Easy-to-Follow Installation Instructions with Mounting Template Click Here to Find Your Mirror Bracket *Does not include cover*Sold as an Individual Quick Guide (pdf)

Read more less

VR-140 Elite Mirror & Cover Combo - SilverThe 6" x 20", VR-140 ELITE offers unparalleled viewable range and clarity via prescription grade optics.  For the first time ever, the boat driver can follow a skier or wakeboarder from port to starboard inside of one uninterrupted, high-definition, high-resolution mirror. The premium mirror is housed in precision CNC-machined 6061-T6 billet aluminum.  The spherical tension socket provides infinite positioning for superior stability in the roughest waters.Includes Mirror Cover.Click Here to Find Your Mirror Bracket Mirror Bracket Sold Separately.*Sold as an Individual Quick Guide (pdf)

Read more less

VR-140 Pro Mirror & Cover Combo - BlackThe 6″ x 20″ VR-140 PRO offers unparalleled viewable range and clarity via prescription grade optics.  For the first time ever, the boat driver can follow a skier (or wakeboarder, tuber, wake surfer, etc.) from port to starboard inside of one uninterrupted, high-definition, high-resolution mirror. The premium mirror is housed in UV-resistant engineered ABS polymer.  The spherical-tension socket provides infinite positioning for superior stability in the roughest waters.Includes Mirror Cover.Click Here to Find Your Mirror Bracket Bracket sold separately.*Sold as an Individual Quick Guide (pdf)

Read more less

Mirror Cover for VR-140 & VX-140 MirrorProtective Mirror Cover is designed specifically for the VR-140 and VX-140 Series mirrors. Made with high-quality neoprene and secure Velcro® closures.*Sold as an Individual 

Read more less

VR-140 Elite Mirror - Electrobrite SilverThe 6" x 20", VR-140 ELITE offers unparalleled viewable range and clarity via prescription-grade optics.  For the first time ever, the boat driver can follow a skier or wakeboarder from port to starboard inside of one uninterrupted, high-definition, high-resolution mirror. The premium mirror is housed in precision CNC-machined 6061-T6 billet aluminum.  The spherical tension socket provides infinite positioning for superior stability in the roughest waters.Click Here to Find Your Mirror Bracket Mirror Bracket Sold Separate.*Does not include cover*Sold as an Individual

Read more less

SingleViu 52mm (2-1/16") Water Temp. Gauge - 250° F - 291-22 OHMSingleViu instruments represent the latest technology in instruments, and offer a top of the line solution by being able to work directly with traditional analog senders or work directly off a J1939 CAN network. Each SingleViu gauge has it's own microprocessor, which allows it to have a dual-input capability that can be switched from it's default analog input to J1939 CAN via the SingleViu Configuration software. Each speedometer or tachometer can also the display the J1939 system fault codes. These features, along with waterproof and fog proof construction, RGB LED illumination and advanced stepper motors make SingleViu the ideal solution when traditional gauges are needed or desired.*291 - 22 Ohm Sender RequiredFeatures: 320-22 Ω Default Input  RGB LED Illumination (default illumination set to White)  Water Resistant Front & Rear  Includes Wire Harness Voltage 12-24V Molex MX 150 8 Pin Connector Spin-Lok™ Mounting Hardware Analog Input ∗Sold as an IndividualWARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Voltage - Input Range (Volts): 12-24V Series: SingleViu Gauge Type: Water Temperature Gauge Size: 52mm Box Set: No Box Dimensions: 4"H x 4"W x 6"L WT: 0.45 lbs UPC: 4103590683588 Owner's Manual (pdf)

Read more less

Pontoon Gazebo - NavyA quick and easy way to gain additional shaded area on your pontoon boat. Top accommodates both 96" and 102" wide boats and extends out to 8ft. of coverage. Constructed from Hot Shot marine grade polyester fabric, the top is strong yet lightweight. It is supported by shock-corded fiberglass pole framework that breaks down for convenient storage. The large interior radius allows you to sit comfortably without bending over and provides excellent headroom. After initial installation of permanently mounted hardware to your playpen rail, the Pontoon Gazebo attaches easily and comes down in minutes. Comes complete with shade top, frame, marine grade hardware and storage bag, and is available in nine colors to best match your boat. The gazebo measures 9' long by 102" wide by approximately 50" high from mounting point. 

Read more less

MACH™ Series High Efficiency & Flexibility Engine Control Cable - Johnson/Evinrude/OMC - 6'MACH14 - Current BRP® (OMC®) style (like C14)MACH14 Stroke: 75 mm (3”). For BRP® - Evinrude® (OMC®) engines manufactured from 1979 to date. Blue color jacket designed for high performance applicationsFor the ultimate in efficiency and response, the Mach Series cables deliver unmatched results. They have been specifically designed to make even the most complex of cable installations result in smooth, easy and precise shift and throttle movement. Using a stranded wire core with lubricated extrusion, the Mach cables are an ideal solution for applications with long cable runs, tight bends, or where easy and precise throttle response is required. Mach Series cables also feature solid stainless steel output fittings.The “high performance” MACH™ Cables are the result of our decades of experience in producing high quality, long lasting, flexible cables. The innovative core design maximizes efficiency and minimizes lost motion, while the exclusive design of the conduit provides extremely high level of flexibility.Features: Suitable for outboard – inboard and sterndrive engines High efficiency for smooth operation High flexibility for reduced bend radius Ideal for long complex cable routing Maintenance free Stainless steel cables end fittings Blue outer jacket resists against abrasion, UV and chemicals

Read more less

Teak Flag Pole - 1" x 24"Boaters appreciate teak's traditional beauty because of its intricate grain patterns and color variations. The high oil content of the wood keeps it from deteriorating or warping in the harsh marine environment of sun, wind, and water. Teak's natural oils and Silica (sand) make it impervious to insects and wood rot. To maintain the lasting beauty of teak, it should be cleaned using a good teak cleaner and oiled periodically with a quality teak oil.Features: Made from the finest grade A, kiln-dried teakwood No deteriorating or warping Specifications: Type: Flags & Flag Poles Box Dimensions: 1"H x 1"W x 24"L WT: 0.6 lbs UPC: 040011953612

Read more less

Teak Flag Pole - 3/4" x 18"Boaters appreciate teak's traditional beauty because of its intricate grain patterns and color variations. The high oil content of the wood keeps it from deteriorating or warping in the harsh marine environment of sun, wind, and water. Teak's natural oils and Silica (sand) make it impervious to insects and wood rot. To maintain the lasting beauty of teak, it should be cleaned using a good teak cleaner and oiled periodically with a quality teak oil.Features: Made from the finest grade A, kiln-dried teakwood No deteriorating or warping Specifications: Type: Flags & Flag Poles Box Dimensions: 1"H x 1"W x 18"L WT: 0.2 lbs UPC: 040011953605

Read more less

Large Swingback Back Boat Seat Cover - Vinyl WhiteKeep your seats and consoles from cracking and fading! Boat seat and consolecovers are designed to protect your seats from damaging ultra-violet rays,wind, mildew and water. All Covers fold easily for storage and keep yourseats cool and clean!Dimensions: 36"H x 40"W x 20"DFeatures: Mildew and water repellant UV Protection Waterproof Air vents Heavy duty Drawstring hem Specifications: Color: White Cover Type: Seat Box Dimensions: 4"H x 10"W x 14"L WT: 2.6 lbs UPC: 040011114853

Read more less

Large Swingback Boat Seat Cover - Rip/Stop Polyester NavyKeep your seats and consoles from cracking and fading! Boat seat and console covers are designed to protect your seats from damaging ultra-violet rays, wind, mildew and water. 600 denier Rip/Stop Polyester with polyurethane coating. All Covers fold easily for storage and keep your seats cool and clean!Dimensions: 36"H x 40"W x 20"D Features: Breathable Mildew and water resistant UV Protection Heavy duty Polyureathane coating Air vents Specifications: Color: Blue Cover Type: Seat Box Dimensions: 4"H x 10"W x 14"L WT: 3.4 lbs UPC: 040011090300

Read more less

Universal Flush Mount Frame for NRX115 Compressor Refrigerators - BlackA universal flush mount installation frame for the Dometic NRX 115 fridges. For a secure fit and a luxury finish.Features: Securely fits your fridge in place A neat and smart frame for your fridge Two door mounting options: protruding or flush with the frame Specifications: Type: Mounting Brackets Box Dimensions: 6"H x 26"W x 33"L WT: 8.8 lbs UPC: 808282390044

Read more less

Compact Carbon CanisterCarbon canister systems utilize an engineered charcoal canister to reduce hydrocarbons entering the atmosphere. Other components of a carbon canister system are designed to ensure the tank fills to the proper level every time without spit-back or well-back. All Attwood carbon canister systems are designed to ensure liquid fuel or water does not reach the canister and are compatible with Jerry Can and marine nozzle refueling.Features: This is a single pack that contains two Compact Carbon Canisters Brackets OEM Installed Low permeation shell reduces overall system emissions Can be mounted in any orientation using brackets provided EPA / CARB Certified Fits a 5/8" vent hose Specifications:  Trailerable Vessel Capacity (EPA Rating): 70 Gallon Non-Trailerable Vessel Capacity (EPA Rating): 110 Gallon Trailerable Vessel Capacity (CARB Rating): 56 Gallon Non-Trailerable Vessel Capacity (CARB Rating): 110 Gallon  *Compatible with Ethanol blended fuels Quick Guide (pdf)

Read more less