T5 Through Tilt Tube Electro Steer - Saltwater - No ElectronicsT5 provides a unique solution to steer a kicker motor. Can be installed on kicker motor with threaded tilt tube without drilling any holes in the boat. Installs in minutes and requires only 4 inches between the main engine and kicker.Mounting hardware included*The NE option has NO ELECTRONICS to be used with a Trollmaster.  Please see item 550503 for Electro Steer with Electronics.

Read more less

Swim Platform Outboard Motor BracketBuilt extra-tough and extra-wide for auxiliary motors. The mounting board is 2” thick weatherproof and maintenance-free polypropylene. Adjustable for long or short shaft engines. Position trim adjustment available by moving bolts on bracket. Rated for outboards up to 20 HP.Features: Adjustable outboard motor bracket designed to mount on most swim platforms Rated for 2- and 4- stroke motors up to 20HP Constructed of black powder-coated aluminum and can be adjusted to fit most platform heights and motor shaft lengths for optimum prop depth and performance Comes complete with a transom support bar for weight support and torque resistance Do NOT use without Panther 55-0415 safety cable – included

Read more less

Shift Knob - 1-1/2" - Smooth Stainless Steel Finish Features: 316 Cast Stainless Steel 1-1/2" Shift Control Knobs Fit Morse MY-3, MV-2, Twin and Single Controls with 3/8" -24 Threads Meets ABYC Specifications

Read more less

Heavy Duty Performance Trim TabsFast response electric actuators for precise control. Fully submersible. All Plug & Play Deutsch connections. Blades are Electro-Polished 12 Gauge - 304 SS with 1" turned up edges, 85 degree inside taper, and 1/4" diameter hinge pin. Extreme Duty actuators with 5/16" SS bolts. Kit is factory assembled with full transom back plate, mechanical strain relief cable seal, adjustable C-channel mounting brackets, and 3.75" sacrificial anodes.We make the best boats better!™Running wide open in rough seas isn't for the faint of heart. Aggressive boating requires durable boat accessories. Lenco's HD series of trim tabs are built to handle whatever you or Mother Nature might throw at them. Everything about your boat is designed to go hard and fast. Why should your trim tab system be any different? All stainless steel construction (no dissimilar metals), Electro-Polished Blades for long lasting good looks Actuator speed is precise and controllable so there are no surprises at top speeds Models have massive backplates and adjustable mounting channels with thru-bolted actuators for the ultimate in strength and reliability Models use solid stainless steel billet rams that are chemically polished for unsurpassed durability Actuators Instant response Fully submersible, maintenance-free and sealed for life High-impact, 50% glass fiber-filled, ultraviolet-resistant nylon case 5/16" stainless steel bolts Standard Solid State Tactile Switch Kits with Retractor Feature#15069-001 (124SSR)For 12-volt single actuator systems. Control box is waterproof, self-contained, sealed, solid state, Deutsch connected for easy Plug & Play installation, and features built-in retractor. Kit includes 36" power pigtail and nylon nuts for mounting keypad. Colorful display box.Features Built-In Retractor Feature Solid State Electronics Plug & Play Low Profile Design Self-Contained, sealed keypad & solid state control box with waterproof connectors Simple, Quick Installation Includes 36" power pigtail for control box 2" hole cut-out size, overall size 2.75" x 2.75' Each kit contains:Standard Tactile Switch Kit2 actuators wth 6' Lead and Deutsch Plugs2 12 Gauge SS Electro-Polished trim tab planes 2 20' Actuator Extension Wiring Harnesses Boat-Mounting Hardware supplied by customer WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Brochure (pdf)

Read more less

Force® Kraken Transducer Replacement KitEasily remove, replace, or upgrade the built-in Garmin transducer on a compatible trolling motor with this kit. It’s recommended to replace all O-rings and compression seals so the motor returns to its original factory waterproof sealing. The nose cone is not included.Specifications: Color: Black Includes Transducer Replacement Part: Force® Kraken Compatible Devices:Force® Kraken trolling motor

Read more less

50' Blue Flexible Hose Kit with Rubber Tip NozzleHoseCoil Flexible Hose Kits are designed and built for durability. The hose has a 600 PSI rating and is protected by a UV-resistant l0O0D Tetoron fabric outer cover. This material is extremely tough, with excellent resistance to abrasion and fading. It is mold and water-resistant, dries quickly, and is designed to easily slide across surfaces without getting snagged or leaving marks like some traditional garden hoses. The hose fittings are built from non-marring sturdy black plastic, and the spigot fitting features a brass end for added strength. The fittings are field¬serviceable, meaning that they can be disassembled and reassembled if the hose ever needs to be repaired. The included spray nozzle is our popular WNSl0 model with a soft rubber comfort grip and impact-resistant rubber tip to protect surfaces from drop damage. Features: Lightweight and strong 600 PSI durable hose Field serviceable fittings Rubber Tip Nozzle included

Read more less

Rubber Tip Nozzle with 9 Pattern Adjustable Spray Head & Comfort GripFeatures: 9 Spray Patterns Comfort Grip Smooth Action Handle Fits all Standard 3/4” Garden Style Fittings Plastic Body

Read more less

740 IP Thru-Hull CameraFeatures an IP Camera to allow complete control despite no moving parts. View on your PC, Laptop, Network Display, Cell Phone, or Tablet.Control of the IP model is achieved in conjunction with Iris Centre camera management software, allowing digital pan, tilt, and zoom functionality and video recording, payback, and management. Iris Centre can handle multiple cameras and is available for download.Features: Aluminum Bronze Bezel Hard Anodised Aluminum Housing IP68 Waterproof Aluminum Housing This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Quick Guide (pdf)Owner's Manual (pdf)

Read more less

Yamaha 150-200 Zero Torque Feedback TillerThe four stroke outboard engines are generating high torque loads which can make tiller steered boats difficult to steer. The Uflex® ZTF Tiller systems eliminate propeller torque at the tiller handle when the driver is not actively changing direction.Using a hydraulic valve, the propeller torque is locked from reaching the tiller handle unless the driver pushes or pulls on the end of the handle, at which point the valve opens and allows for active steering movements. Now you can drive your tiller steered boat in comfort, saving your energy for reeling in fish rather than effort to just get to your favorite fishing spot.

Read more less

Pontoon Rail Fender Adjuster - 4-Pack Finally, a fender adjuster designed specifically for the 1" square tube rails of Pontoon Boats. The mounting structure clamps securely to square tubing yet can be repositioned quickly and easily. Constructed from durable ABS plastic, this fender adjuster allows for simple height adjustment for lines up to 3/8".

Read more less

12" x 18" Shark FlagFisherman's Catch FlagsAll flags measure 12" x 18" with brass grommets. Specifications: Type: Flags & Flag Poles Box Dimensions: 1"H x 5"W x 8"L WT: 0.2 lbs UPC: 040011933287

Read more less

SkegShield® Skeg Guard for Merc O/BPrevent gearcase damage and protect your skeg with SkegShield® by Gator Guards. Installs in minutes to repair an already broken skeg with 27 American-made models engineered to fit your exact outboard or inboard. If your engine model is not listed, unfortunately, we do not have a model that will fit your specific needs.With your keel guarded and your bow shielded from damage, there is one part of the boat that is still exposed to excessive risk of damage, and that is your skeg. Gator Guards offers an extensive line of SkegShield skeg guards to protect your outboard or stern drive from damage.All SkegShields are made of 18-gauge, mirror finish polished 316 marine grade stainless steel. The SkegShield is further reinforced on the lower edge for protection that makes SkegShield twice as strong as any OEM skeg. SkegShield doesn’t stop there, we were the first to include a drain hole to prevent water retention & corrosion!27 Models available to fit your exact outboard or inboard engine. Mercury, Yamaha, Evinrude, Mercruiser, Mariner, Suzuki, Johnson, Honda, Force, Volvo Penta, and Tohatsu. Use the engine guide above to find your SkegShieldCompatible With:SS00513 - Evinrude (by Suzuki), 40-50 HP, 4 Stroke, 99-03; Mercury, 40-60 HP, 2 & 4 Stroke, 03-Current; and Mercury (ELPTO Model Only), 60 HP, 2 Stroke, 97-99Features: The toughest repair and protection for your lower unit Protects your skeg, preventing damage and costly repairs Easy DIY installation Reinforced lower edge for 2X the strength Shearable bolts prevent gearcase damage Drain hole to prevent water retention Made of durable 18-gauge 316 marine grade mirror polished Stainless Steel Prevent costly repairs Maintain the value of your boat 3-year warranty Installation Tips:All SkegShields are easy to install. There is no welding—no messy glue, adhesive or epoxy, and best of all no curing or down time. You’ll be back on the water in under 30 minutes and since we don’t have a foot or skid plate welded on the bottom we won’t affect your boat’s performance. If your motor is still under warranty – please check with your manufacturer about drilling holes in the skeg to mount a skeg guard.

Read more less

Bowshield - Small 6.5" x 6"Protect the bow of your boat from scuffs and abrasions caused by the trailer roller with the most durable bow guard on the market.The bow, much like the keel, is in a very vulnerable area in the front of the boat. The exposed bow can easily be scratched, torn, and worse from bumping into docks, trailer hitches, and bow rollers. This can cause some expensive damage to your boat. Don’t let that happen! Ensure that your bow area is protected with Gator Guards BowShield.Constructed of strong and durable 22 gauge, 316 marine grade mirror finish stainless steel, the small BowShield is 6.5" x 6" and fits bow rollers up to 5'' and the medium fits bow rollers up to 8''  The area where the BowShield gets installed needs to be smooth with no steps or chines to conform around.The BowShield has a pre-creased centerline for easy bending and fitting. It is easy to apply and comes complete with a 24-hour urethane adhesive for a permanent installation. It will not pop off like the peel-and-stick ones. Every BowShield comes with our three-year warranty.Features: Easy, DIY installation Eliminates costly repairs Increases the value of your boat Made of durable 316 marine-grade mirror-finished stainless steel Available in 2 sizes

Read more less

SkegShield® Skeg Guard for Merc/Bravo 1&3Prevent gearcase damage and protect your skeg with SkegShield® by Gator Guards. Installs in minutes to repair an already broken skeg with 27 American-made models engineered to fit your exact outboard or inboard. If your engine model is not listed, unfortunately, we do not have a model that will fit your specific needs.With your keel guarded and your bow shielded from damage, there is one part of the boat that is still exposed to excessive risk of damage, and that is your skeg. Gator Guards offers an extensive line of SkegShield skeg guards to protect your outboard or stern drive from damage.All SkegShields are made of 18-gauge, mirror finish polished 316 marine grade stainless steel. The SkegShield is further reinforced on the lower edge for protection that makes SkegShield twice as strong as any OEM skeg. SkegShield doesn’t stop there, we were the first to include a drain hole to prevent water retention & corrosion!27 Models available to fit your exact outboard or inboard engine. Mercury, Yamaha, Evinrude, Mercruiser, Mariner, Suzuki, Johnson, Honda, Force, Volvo Penta, and Tohatsu. Use the engine guide above to find your SkegShieldFeatures: The toughest repair and protection for your lower unit Easy DIY installation Reinforced lower edge for 2X the strength Shearable bolts prevent gearcase damage Drain hole to prevent water retention Made of durable 18-gauge 316 marine grade mirror polished Stainless Steel Prevent costly repairs Maintain the value of your boat 3-year warranty Installation Tips:All SkegShields are easy to install. There is no welding—no messy glue, adhesive or epoxy, and best of all no curing or down time. You’ll be back on the water in under 30 minutes and since we don’t have a foot or skid plate welded on the bottom we won’t affect your boat’s performance. If your motor is still under warranty – please check with your manufacturer about drilling holes in the skeg to mount a skeg guard.

Read more less

SkegShield® Skeg Guard for YamahaPrevent gearcase damage and protect your skeg with SkegShield® by Gator Guards. Installs in minutes to repair an already broken skeg with 27 American-made models engineered to fit your exact outboard or inboard. If your engine model is not listed, unfortunately, we do not have a model that will fit your specific needs.With your keel guarded and your bow shielded from damage, there is one part of the boat that is still exposed to excessive risk of damage, and that is your skeg. Gator Guards offers an extensive line of SkegShield skeg guards to protect your outboard or stern drive from damage.All SkegShields are made of 18-gauge, mirror finish polished 316 marine grade stainless steel. The SkegShield is further reinforced on the lower edge for protection that makes SkegShield twice as strong as any OEM skeg. SkegShield doesn’t stop there, we were the first to include a drain hole to prevent water retention & corrosion!27 Models available to fit your exact outboard or inboard engine. Mercury, Yamaha, Evinrude, Mercruiser, Mariner, Suzuki, Johnson, Honda, Force, Volvo Penta, and Tohatsu. Use the engine guide above to find your SkegShieldFeatures: The toughest repair and protection for your lower unit Easy DIY installation Reinforced lower edge for 2X the strength Shearable bolts prevent gearcase damage Drain hole to prevent water retention Made of durable 18-gauge 316 marine grade mirror polished Stainless Steel Prevent costly repairs Maintain the value of your boat 3-year warranty Installation Tips:All SkegShields are easy to install. There is no welding—no messy glue, adhesive or epoxy, and best of all no curing or down time. You’ll be back on the water in under 30 minutes and since we don’t have a foot or skid plate welded on the bottom we won’t affect your boat’s performance. If your motor is still under warranty – please check with your manufacturer about drilling holes in the skeg to mount a skeg guard.

Read more less

SkegShield® Skeg Guard for Mercury MarinerPrevent gearcase damage and protect your skeg with SkegShield® by Gator Guards. Installs in minutes to repair an already broken skeg with 27 American-made models engineered to fit your exact outboard or inboard. If your engine model is not listed, unfortunately, we do not have a model that will fit your specific needs.With your keel guarded and your bow shielded from damage, there is one part of the boat that is still exposed to excessive risk of damage, and that is your skeg. Gator Guards offers an extensive line of SkegShield skeg guards to protect your outboard or stern drive from damage.All SkegShields are made of 18-gauge, mirror finish polished 316 marine grade stainless steel. The SkegShield is further reinforced on the lower edge for protection that makes SkegShield twice as strong as any OEM skeg. SkegShield doesn’t stop there, we were the first to include a drain hole to prevent water retention & corrosion!27 Models available to fit your exact outboard or inboard engine. Mercury, Yamaha, Evinrude, Mercruiser, Mariner, Suzuki, Johnson, Honda, Force, Volvo Penta, and Tohatsu. Use the engine guide above to find your SkegShieldMercury/Mariner: 75 - 115 HP 4-stroke: 2015 - Current (Command Thrust & SeaPro) 135 - 200 HP 4-stroke: 2005 - 2018 (4.8" Case) 200 - 300 HP 2-stroke: 1996 - 2018 (Fits Optimax)  Features: The toughest repair and protection for your lower unit Easy DIY installation Reinforced lower edge for 2X the strength Shearable bolts prevent gearcase damage Drain hole to prevent water retention Made of durable 18-gauge 316 marine grade mirror polished Stainless Steel Prevent costly repairs Maintain the value of your boat 3-year warranty Installation Tips:All SkegShields are easy to install. There is no welding—no messy glue, adhesive or epoxy, and best of all no curing or down time. You’ll be back on the water in under 30 minutes and since we don’t have a foot or skid plate welded on the bottom we won’t affect your boat’s performance. If your motor is still under warranty – please check with your manufacturer about drilling holes in the skeg to mount a skeg guard.

Read more less

Bowshield - Medium 7.5" x 9"Protect the bow of your boat from scuffs and abrasions caused by the trailer roller with the most durable bow guard on the market.The bow, much like the keel, is in a very vulnerable area in the front of the boat. The exposed bow can easily be scratched, torn, and worse from bumping into docks, trailer hitches, and bow rollers. This can cause some expensive damage to your boat. Don’t let that happen! Ensure that your bow area is protected with Gator Guards BowShield.Constructed of strong and durable 22 gauge, 316 marine grade mirror finish stainless steel, the small BowShield is 6.5" x 6" and fits bow rollers up to 5'' and the medium fits bow rollers up to 8''  The area where the BowShield gets installed needs to be smooth with no steps or chines to conform around.The BowShield has a pre-creased centerline for easy bending and fitting. It is easy to apply and comes complete with a 24-hour urethane adhesive for a permanent installation. It will not pop off like the peel-and-stick ones. Every BowShield comes with our three-year warranty.Features: Easy, DIY installation Eliminates costly repairs Increases the value of your boat Made of durable 316 marine-grade mirror-finished stainless steel Available in 2 sizes

Read more less

SkegShield® Skeg Guard for Merc/A1 G2Prevent gearcase damage and protect your skeg with SkegShield® by Gator Guards. Installs in minutes to repair an already broken skeg with 27 American-made models engineered to fit your exact outboard or inboard. If your engine model is not listed, unfortunately, we do not have a model that will fit your specific needs.With your keel guarded and your bow shielded from damage, there is one part of the boat that is still exposed to excessive risk of damage, and that is your skeg. Gator Guards offers an extensive line of SkegShield skeg guards to protect your outboard or stern drive from damage.All SkegShields are made of 18-gauge, mirror finish polished 316 marine grade stainless steel. The SkegShield is further reinforced on the lower edge for protection that makes SkegShield twice as strong as any OEM skeg. SkegShield doesn’t stop there, we were the first to include a drain hole to prevent water retention & corrosion!27 Models available to fit your exact outboard or inboard engine. Mercury, Yamaha, Evinrude, Mercruiser, Mariner, Suzuki, Johnson, Honda, Force, Volvo Penta, and Tohatsu. Use the engine guide above to find your SkegShieldFeatures: The toughest repair and protection for your lower unit Easy DIY installation Reinforced lower edge for 2X the strength Shearable bolts prevent gearcase damage Drain hole to prevent water retention Made of durable 18-gauge 316 marine grade mirror polished Stainless Steel Prevent costly repairs Maintain the value of your boat 3-year warranty Installation Tips:All SkegShields are easy to install. There is no welding—no messy glue, adhesive or epoxy, and best of all no curing or down time. You’ll be back on the water in under 30 minutes and since we don’t have a foot or skid plate welded on the bottom we won’t affect your boat’s performance. If your motor is still under warranty – please check with your manufacturer about drilling holes in the skeg to mount a skeg guard.

Read more less

SkegShield® Skeg Guard for Merc/VeradoPrevent gearcase damage and protect your skeg with SkegShield® by Gator Guards. Installs in minutes to repair an already broken skeg with 27 American-made models engineered to fit your exact outboard or inboard. If your engine model is not listed, unfortunately, we do not have a model that will fit your specific needs.With your keel guarded and your bow shielded from damage, there is one part of the boat that is still exposed to excessive risk of damage, and that is your skeg. Gator Guards offers an extensive line of SkegShield skeg guards to protect your outboard or stern drive from damage.All SkegShields are made of 18-gauge, mirror finish polished 316 marine grade stainless steel. The SkegShield is further reinforced on the lower edge for protection that makes SkegShield twice as strong as any OEM skeg. SkegShield doesn’t stop there, we were the first to include a drain hole to prevent water retention & corrosion!27 Models available to fit your exact outboard or inboard engine. Mercury, Yamaha, Evinrude, Mercruiser, Mariner, Suzuki, Johnson, Honda, Force, Volvo Penta, and Tohatsu. Use the engine guide above to find your SkegShieldFeatures: The toughest repair and protection for your lower unit Easy DIY installation Reinforced lower edge for 2X the strength Shearable bolts prevent gearcase damage Drain hole to prevent water retention Made of durable 18-gauge 316 marine grade mirror polished Stainless Steel Prevent costly repairs Maintain the value of your boat 3-year warranty Installation Tips:All SkegShields are easy to install. There is no welding—no messy glue, adhesive or epoxy, and best of all no curing or down time. You’ll be back on the water in under 30 minutes and since we don’t have a foot or skid plate welded on the bottom we won’t affect your boat’s performance. If your motor is still under warranty – please check with your manufacturer about drilling holes in the skeg to mount a skeg guard.

Read more less

ATLAS™ 10" Set Back Hydraulic Jack Plate - Heavy DutyT-H Marine’s ATLAS™ Hydraulic Jack Plate is now available in a “HEAVY DUTY” upgrade.T-H Marine’s ATLAS™ Hydraulic Jack Plate is the #1 selling jack plate in the world and the #1 Choice by fishing professionals and boat manufacturers. With the ATLAS™ HEAVY DUTY, the product is available for applications on even larger outboards, rated for engines up to 400 hp.5 REASONS YOU SHOULD CHOOSE THE ATLAS™ HYDRAULIC JACK PLATE ATLAS™ is truly the best hydraulic jack plate in the world ATLAS™ is factory installed by more boat manufacturers than any other plate ATLAS™ is used by more professional fisherman than any other hydraulic jack plate ATLAS™ is the #1 selling hydraulic plate in the world – sold & serviced by more outlets ATLAS™ hydraulic actuator is made in the U.S.A. vs. our competitors being from China 6 WAYS THE ATLAS™ CHANGED HYDRAULIC JACK PLATES FOREVER ATLAS™ is made by T-H Marine/CMC, who were the FIRST to offer an actuator inside the jack plate – the competition copied ATLAS™ was the first plate to offer predrilling for shallow water anchors – the competition copied ATLAS™ was the first and only plate that did not require regular grease lubrication – the competition design cannot do that ATLAS™ was the first plate to include a heavy duty safety cable to protect boaters from engine entering cockpit upon failure ATLAS™ was the first plate to offer a very simple actuator replacement in the field ATLAS™ was the first major development in hydraulic jack plates in over a decade – spurring hydraulic jack plate improvement WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Pitot Kit - UniversalComplete transom mount speedometer pick-up with escutcheon plate and mounting hardware for use with all marine pressure- driven speedometers.*Sold without tubing.Factory P/N KS9007*Sold as an IndividualThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Color: Black Gauge Type: Speedometer Voltage - Input Range (Volts): N/A Box Set: No Box Dimensions: 2"H x 3"W x 7"L WT: 0.2 lbs UPC: 759266911093

Read more less

Dress White 4" Tachometer - 7000 RPM (Gas)  (All Outboards)Perimeter-lighted White dial with bold Black graphics, White aluminum bezel, contoured Black pointer and flat glass lens. Electronic tachometers work by counting pulses generated by the ignition system, alternator, tach signal generator or magnetic pickup sender. The tach is hooked up to +12VDC, Ground and one of the signal sources listed.By selecting the right tach and setting the switch on the back to the correct position you let the tachometer know how many pulses are sent per each engine revolution.4" - Hole size: 3.375" (85mm)Specifications: Anti-scratch glass lens 12 VDC negative ground Can be adapted for 24 VDC systems Factory P/N TC9038*Sold as an Individual**Gauge Cover not IncludedThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Gauge Type: Tachometer Series: Dress White Voltage - Input Range (Volts): 12/24 V Gauge Size: 4" Box Set: No Box Dimensions: 5"H x 6"W x 6"L WT: 0.7 lbs UPC: 759266331044 Quick Guide (pdf)

Read more less

Chesapeake White SS 2" Water Temperature Gauge (100-250°F)Perimeter-lighted White dial with stylish Blue and White graphics, polished stainless steel bezel, contoured White pointer and domed glass lens.A temperature gauge operates by sending a low amperage current through the gauge's meter to ground via a sending unit with variable resistance. The resistance of the sending units increase or decrease with the changes in pressure, temperature, etc...As the sender's resistance varies, the amount of current allowed to flow through it to ground changes and the meter deflects, showing the temperature.2" - Hole Size: 2.0625" (53mm)Specifications: Anti-scratch glass lens Perimeter lighted back light 12 VDC negative ground Can be adapted for 24 VDC systems Dual Scale - Imperial or Metric  Factory P/N GP9178*Sold as an Individual**Gauge Cover not IncludedThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Gauge Type: Water Temperature Series: Chesapeake White Voltage - Input Range (Volts): 12/24 V Gauge Size: 2" Box Set: No Box Dimensions: 4"H x 4"W x 5"L WT: 0.3 lbs UPC: 759266138049 Quick Guide (pdf)

Read more less

Euro Black 2" Voltmeter (10-16 VDC)Perimeter-lighted Black dial with bold White graphics, Black aluminum bezel, contoured White pointer and flat glass lens.A voltmeter indicates the battery voltage and the general condition of the battery charging system. The meter requires no warm-up and indicates voltage changes instantly.2" - Hole Size: 2.0625" (53mm)Specifications: Anti-scratch glass lens Plastic Cases for corrosion resistance and long life Perimeter-lighted Black dial Can be adapted for 24 VDC systems Factory P/N VP9134*Sold as an Individual**Gauge Cover not IncludedThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Gauge Type: Voltmeter/Ammeter Series: Euro Black Voltage - Input Range (Volts): 12/24 V Gauge Size: 2" Box Set: No Box Dimensions: 4"H x 4"W x 5"L WT: 0.3 lbs UPC: 759266128217

Read more less

PROTECH 1.1 Front Mount OB Hydraulic System - Includes UP28 FM Helm, Oil & UC128-TS/1 Cylinder - No HosesDurability and performance define the Protech front mount outboard steering package. From the stainless steel helm shaft, heavy duty shaft seals, carbon steel piston and 304 electropolished and passivated stainless link assemblies, the Protech is built for maximum longevity and peak performance. Adjustable boss style fittings allow precise hose routing without the risk of breaking the fittings by overtightening or leaking fittings from loosening during installation, a common problem on competing cylinders. Kit Contains: UP28FM - Front mount helm pump UC128-TS/1 Cylinder OIL 15 - Hydraulic oil - 2 quarts Hoses & Wheel Not Included Brochure (pdf)

Read more less

Standard Integrated Tactile Switch Kit with Pigtail for Single Actuator SystemsComplete your Lenco single actuator trim tab system with the latest, maintenance-free (ALL-IN-ONE) integrated tactile switch kit design. This NEW switch technology improves accuracy and integrates the control box functionality into the key pad bezel. Features Include Simple, quick, Plug & Play installation Instant response Built-in retractor Low profile design Self-contained key pad with waterproof Plug & Play Deutsch connectors Wiring harness length 30" (76.2 cm) from the back of the switch bezel 36" power pigtail 2 1/16" hole cut-out size, overall key pad size of 2.75" x 2.75" 4.08" clearance required from the back of the key pad's mounting location ATTENTION: REPLACEMENT KEY PADS & CONTROL BOXES FOR 2016 & PRIOR SWITCHES ARE NOT COMPATIBLE WITH THIS SWITCH KIT.Replacement parts are available and are sold separately. Specifications 3 Year Warranty System Type: Single Actuator Compliance: CE Certified WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Brochure (pdf)

Read more less

9" x 12" Standard Trim Tab Kit w/Standard Integrated Switch Kit- 12V Lenco Electric Complete Trim Tab Kits make your boat ride smoother, drier, faster and with increased safety whether on a small skiff or a large yacht. Lenco fast response electric actuators are fully submersible with all plug & play waterproof Deutsch connections.Standard Trim Tab blades are 12 Gauge - 304 SS with a 5/8" flared trailing edge and 1/8" diameter hinge pin. Kits include standard actuators with 5/16" SS bolts.Lenco Trim Tab Switch Kits complete your trim tab system with totally waterproof, maintenance-free, and easy-to-install tactile switches.Kit includes:  Self-contained sealed keypad Control box 36" Pigtail Specifications: Suggested Boat Length: 16' to 25' Length of Tab: 9" Width of Tab: 12" Blades: 12 Gauge Stainless Steel Finish: Smooth Switch Kit: Standard Tactile Class: Fuel Efficient Compliance: CE Certified Compatibility: Any Boat Actuators: 12-volt WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Brochure (pdf)

Read more less

12" x 12" Standard Trim Tab Kit w/Standard Integrated Switch Kit - 12V Lenco Electric Complete Trim Tab Kits make your boat ride smoother, drier, faster and with increased safety whether on a small skiff or a large yacht. Lenco fast response electric actuators are fully submersible with all plug & play waterproof Deutsch connections.Standard Trim Tab blades are 12 Gauge - 304 SS with a 5/8" flared trailing edge and 1/8" diameter hinge pin. Kits include standard actuators with 5/16" SS bolts.Lenco Trim Tab Switch Kits complete your trim tab system with totally waterproof, maintenance-free, and easy-to-install tactile switches.Kit includes:  Self-contained sealed keypad Control box 36" Pigtail Specifications: Suggested Boat Length: 17' to 30' Length of Tab: 12" Width of Tab: 12" Blades: 12 Gauge Stainless Steel Finish: Smooth Switch Kit: Standard Tactile Class: Fuel Efficient Compliance: CE Certified Compatibility: Any Boat Actuators: 12-volt WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Brochure (pdf)

Read more less

9" x 12" Standard Mount Trim Tab Kit without Switch Kit- 12VLenco Electric Standard Mount Trim Tab Kits make your boat ride smoother, drier, faster and with increased safety whether on a small skiff or a large yacht. The Lenco ballscrew design is more reliable, three times more powerful and features an instant response, which makes them very user friendly compared to typical hydraulics.Lenco fast response electric actuators are fully submersible with all plug & play waterproof Deutsch connections. Trim Tab blades are 12 Gauge - 304 SS with a 5/8" flared trailing edge and 1/8" diameter hinge pin. Kits include standard actuators with 5/16" SS bolts.Kit Contents: 2 each of 12-gauge stainless steel trim tab blades 2 each of #15054-001 actuator with 6' leads and Deutsch plugs 2 each of #30133-103 20' actuator extension wiring harnesses 2 each of #15085-001 (116) upper mounting brackets with gland seal 2 each of #50014-001 (119) lower mounting brackets 1 each of the Lenco owner’s / installation manual All necessary stainless steel mounting hardware Specifications: Suggested Boat Length: 16' to 25' Length of Tab: 9" Width of Tab: 12" Hinge Height: 2" Minimum Transom Height: 14" Blades: 12 Gauge Stainless Steel Finish: Smooth Switch Kit: Sold Separately Class: Fuel Efficient Compliance: CE Certified Compatibility: Any Boat Actuators: 12-volt WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Brochure (pdf)

Read more less

Trim tabs make the single most important difference in the way your boat rides and performs. They are optional on some boats but should be as standard as power trim and tilt. Lenco trim tabs make your boat ride smoother, drier, faster and with increased safety whether on a small skiff or a mega-yacht. Lenco's ballscrew design is more reliable, three times more powerful and features an instant response, which makes them very user friendly compared to typical hydraulics. We also like being oil-free and environmentally conscious. Instant response electric actuators for precise control Everything is fully submersible, maintenance-free and sealed for life Self-locking ballscrew will not drift, even while backing down 12-gauge laser cut stainless steel trim tab planes High-impact corrosion-proof mounts look great through years of abuse Clean, time and space-saving installation Actuators have high-impact, 50% glass fiber-filled, ultraviolet-resistant nylon case 316 super buff stainless steel rams Standard Solid State Tactile Switch Kits with Retractor Feature#15069-001 (124SSR)For 12-volt single actuator systems. Control box is waterproof, self-contained, sealed, solid state, Deutsch connected for easy Plug & Play installation, and features built-in retractor. Kit includes 36" power pigtail and nylon nuts for mounting keypad. Colorful display box.Features Built-In Retractor Feature Solid State Electronics Plug & Play Low Profile Design Self-Contained, sealed keypad & solid state control box with waterproof connectors Simple, Quick Installation Includes 36" power pigtail for control box 2" hole cut-out size, overall size 2.75" x 2.75' Each kit contains: Standard Tactile Switch Kit 2 12-volt Actuators with 6-foot leads and Deutsch connectors 2 20' actuator extension harnesseswith Deutsch connectors 2 Stainless steel trim tab blades 2 upper mounting bracket with gland seal 2 lower mounting bracket All Necessary stainless steel Mounting hardware WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Brochure (pdf)

Read more less

Standard Performance Series TabsStandard actuator with 5/16" stainless steel through bolts. 1" turned up edges with 2" taper on the inside. All 12-gauge 304 stainless steel construction with Electro-Polished BladesWe make the best boats better!™Running wide open in rough seas isn't for the faint of heart. Aggressive boating requires durable boat accessories. Lenco's Standard Performance series of trim tabs are built to handle whatever you or Mother Nature might throw at them. Everything about your boat is designed to go hard and fast. Why should your trim tab system be any different? All stainless steel construction (no dissimilar metals), Electro Polished Blades for long lasting good looks Actuator speed is precise and controllable so there are no surprises at top speeds Actuators Instant response Fully submersible, maintenance-free and sealed for life High-impact, 50% glass fiber-filled, ultraviolet-resistant nylon case Standard Solid State Tactile Switch Kits with Retractor Feature#15069-001 (124SSR)For 12-volt single actuator systems. Control box is waterproof, self-contained, sealed, solid state, Deutsch connected for easy Plug & Play installation, and features built-in retractor. Kit includes 36" power pigtail and nylon nuts for mounting keypad. Colorful display box.Features Built-In Retractor Feature Solid State Electronics Plug & Play Low Profile Design Self-Contained, sealed keypad & solid state control box with waterproof connectors Simple, Quick Installation Includes 36" power pigtail for control box 2" hole cut-out size, overall size 2.75" x 2.75' Each kit contains:Standard Tactile Switch Kit2 actuators with 6' Lead & Deutsch Plugs2 12 Gauge SS Electro Polished trim tab planes 2 20' Actuator Extension Wiring Harness 2 Upper Mounting Bracket with Gland Seal 2 Lower Mounting Bracket All Necessary stainless steel mounting Hardware WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Brochure (pdf)

Read more less

Standard Performance Series TabsStandard actuator with 5/16" stainless steel through bolts. 1" turned up edges with 2" taper on the inside. All 12-gauge 304 stainless steel construction with Electro-Polished BladesWe make the best boats better!™Running wide open in rough seas isn't for the faint of heart. Aggressive boating requires durable boat accessories. Lenco's Standard Performance series of trim tabs are built to handle whatever you or Mother Nature might throw at them. Everything about your boat is designed to go hard and fast. Why should your trim tab system be any different? All stainless steel construction (no dissimilar metals), Electro Polished Blades for long lasting good looks Actuator speed is precise and controllable so there are no surprises at top speeds Actuators Instant response Fully submersible, maintenance-free and sealed for life High-impact, 50% glass fiber-filled, ultraviolet-resistant nylon case Standard Solid State Tactile Switch Kits with Retractor Feature#15069-001 (124SSR)For 12-volt single actuator systems. Control box is waterproof, self-contained, sealed, solid state, Deutsch connected for easy Plug & Play installation, and features built-in retractor. Kit includes 36" power pigtail and nylon nuts for mounting keypad. Colorful display box.Features Built-In Retractor Feature Solid State Electronics Plug & Play Low Profile Design Self-Contained, sealed keypad & solid state control box with waterproof connectors Simple, Quick Installation Includes 36" power pigtail for control box 2" hole cut-out size, overall size 2.75" x 2.75' Each kit contains:Standard Tactile Switch Kit2 actuators with 6' Lead & Deutsch Plugs2 12 Gauge SS Electro Polished trim tab planes 2 20' Actuator Extension Wiring Harness 2 Upper Mounting Bracket with Gland Seal 2 Lower Mounting Bracket All Necessary stainless steel mounting Hardware WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Brochure (pdf)

Read more less

102 Series Standard Actuator - 12V - 4-1/4" Stroke w/HardwareThe 102 Actuator is used with Trolling Tab systems sold prior to 2000 and OEM applications. 4.25 stroke. Overall length (tip to tip) is 14 inches. Instant response electric actuators are made of high impact glass fiber filled, ultraviolet-resistant nylon material with 316 super buff stainless steel tubing.Specifications: Newly implemented Anti Extrusion Ring (AXR) seal stabilization system. Stronger top cap and mounting clevis design Improved pressure-tight torx screws Integrated wiper seal at actuator base Molded-in brass thrust bearing design Thicker and stronger motor housing wall Improved O-Ring design for more consistent seal Over-molded cable providing a stronger tighter seal Upper mounting bracket with gland seal Features: Lenco's ballscrew design is more reliable and twice as powerful compared to typical hydraulics Lenco's tough, high-torque actuator motor easily pushes 500 pounds. Lenco Actuator connections use waterproof "Plug & Play" Deutsch connectors eliminating the possibility of water intrusion. 12 Volt 5/16" mounting hardware 6 foot cable WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Quick Guide (pdf)

Read more less

Edgemount 12" x 18" Single - 12 Gauge Replacement Blade Gauge:12 Anode: No Back Plate: No WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

Standard 12" x 12" Single - 12 Gauge Replacement Blade Gauge:12 Anode: No Back Plate: No WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

Sikaflex®-715 - White - 300ml CartridgeSemi self-leveling roof membrane sealer.Sikaflex®-715 is a one-component silane terminated polymer (STP) sealant that cures on exposure to atmospheric humidity.  Its unique flow characteristic is designed for roof sealing applications.  Sikaflex®-715 has very good adhesion and UV resistance making it suitable for open joints.  Features: Primerless adhesion to the difficult substrate Semi self-leveling for roof sealing Very good dispensing characteristics Isocyanate free Low VOC content Very good UV resistance Usage:Sikaflex®-715 is suitable for sealing a wide variety of RV roofing components including, EPDM; metals such as anodized and bare aluminum; phosphate, chromate, and zinc-plated steel; metal primers; 2-part coatings; ceramics and plastics. Seek manufacturer’s advice and perform tests on original substrates before using Sikaflex®-715 on materials prone to stress cracking. This product is suitable for experienced professional users only. Tests with actual substrates and conditions have to be performed to ensure adhesion and material compatibility.Surface Preparation:Surfaces must be clean, dry and free from grease, oil and dust. For repairs, removal of pre-exisiting products is crucial to avoid compatibility issues.  Surface treatment depends on the specific nature of the substrates and is crucial for a long lasting bond. Adhesion and compatibility have to be verified by tests on original substrates.Application:Sikaflex®-715 can be processed between 5 °C and 40 °C (41 °F and 104 °F) but, changes in reactivity and application properties have to be considered. The optimum temperature for substrate and process material is between 15 °C and 25 °C (59 °F and 77 °F). Sikaflex®-715 can be processed with manual, pneumatic, or electric-driven piston guns as well as pump equipment.Removal:Uncured Sikaflex®-715 may be removed from tools and equipment with Sika® Remover-208 or another suitable solvent. Once cured, the material can only be removed mechanically.  Hands and exposed skin have to be washed immediately using a suitable industrial hand cleaner and water. Do not use solvents on the skin.Overpainting:Sikaflex®-715 is not suitable for overpainting.Specifications: Chemical base: Silane Terminated Polymer Color (CQP001-1): White, black Cure mechanism: Moisture-curing Density (uncured): 1.52 kg/l (12.7 lb/gal) Non-sag properties: Semi self-leveling Application temperature: 5-40 °C (41-104 °F) Skin time (CQP019-1): 30 minutes A Shore A hardness (CQP023-1 / ISO 48-4): 10 Tensile strength (ASTM D412): 0.6 MPa (85 psi) Elongation at break (ASTM D412): 500% Service temperature (CQP513-1): -50-90 °C (-58-94 °F)

Read more less

12" x 18" Edge Mount Trim Tab Kit without Switch Kit -12V Lenco Electric Edge Mount Trim Tab Kits make your boat ride smoother, dryer, faster and with increased safety whether on a small skiff or a large yacht. The Lenco ball screw design is more reliable, three times more powerful and features an instant response, which makes them very user friendly compared to typical hydraulics. Lenco fast response electric actuators are fully submersible with all plug & play waterproof Deutsch connections. Edge Mount actuators mount at the trailing edge of the plane, requiring 4" (10.16 cm) less transom height than Lenco standard mount trim tabs.Kit Contents: 2 each of 12-gauge stainless steel trim tab blades 2 each of #15054-001 actuator with 6' leads & Deutsch plugs 2 each of #30133-103 20' actuator extension wiring harnesses 2 each of #15085-001 (116) upper mounting brackets with gland seal 2 each of #50014-001 (119) lower mounting brackets 1 each of the Lenco owner’s / installation manual All necessary stainless steel mounting hardware Specifications: Suggested Boat Length: 26' to 36' Length of Tab: 12" Width of Tab: 18" Hinge Height: 2" Minimum Transom Height: 11" Blades: 12 Gauge Stainless Steel Finish: Smooth Switch Kit: Sold Separately Class: Fuel Efficient Compliance: CE Certified Compatibility: Any Boat Actuators: 12-volt WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Brochure (pdf)

Read more less

Riptide Transom Saltwater Trolling MotorTransom MountHand ControlRebuilt with an intuitive, easy-to-use design, the Riptide Transom delivers power and precision maneuverability. With a push-to-test battery meter and unmatched corrosion protection, Riptide Transom means fish are out of places to hide.Steering ControlTelescoping Handle: Six-inch telescoping handle provides comfortable, easy steering.Speed Control5 Fwd/3 Rev: provides five forward speed settings & three reverse speed settings to easily choose the speed you need for simple, intuitive control that puts you in command. Push-to-Test Battery MeterThis convenient battery meter tells you how much battery life you have left - at the push of a button.PropellerPower Prop: Delivers extra power to help you push through heavy vegetation to get you where the fish are.Saltwater AdvantageAdvanced Corrosion Protection: Riptide's premium-grade alloys are fortified by a multi-step cleaning process, tough-as-nails armor plating & a durable, saltwater-resistant powder coat paint.  With layers of protection, the elements are truly protected. Fully Encapsulated Electronics: Marine-grade urethane fully encapsulates Riptide control boards to protect the electronic circuitry. All electrical connections are sealed with waterproof heat-shrink tubing to keep saltwater out.Advantage Minn KotaIndestructible Composite Shaft: Pound for pound, our composite shaft is stronger than steel. It flexes on impact and won’t break, kink or corrode. That’s why we’re confident enough to guarantee it for life. Cool, Quiet, Power:Nothing runs cooler or quieter than a Minn Kota. Our extra large windings and commutators dissipate heat, resulting in cooler operation, extended battery power, and longer motor life. And our unique bearing system reduces friction to cut fish-spooking noise.2-Year WarrantyThis motor is backed up with Minn Kota’s two-year warranty.Specifications Control: Telescoping Handle Volts: 12 Max Thrust: 45 lbs. Shaft Length: 36" Speed Control: 5 FWD/3 Rev Max. Amp Draw: 42 Prop: Power Prop (MKP-2) WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Included Propeller: MKP-2 Autopilot: No Control Type: Telescoping Handle Mounting Style: Transom Salt Water/Fresh Water: Salt Shaft Length (Inches): 36" Thrust (Pounds): 45 lbs Built-In Transducer: No Voltage - Input Range (Volts): 12v Series: Riptide Box Dimensions: 7"H x 18"W x 51"L WT: 23 lbs UPC: 029402040865 Owner's Manual (pdf)

Read more less

Megaware SkegPro® 02656 Stainless Steel Skegpro Model Guide  Mercury - 200 hp XR6 BlackMax EFI  Stop Damage To Your Boat's Skeg - Save Your Skeg & Enhance It's AppearanceMegaware SkegPro® protects your motor’s skeg against harsh marine environments. Its mirror-polished finish creates a custom look and lasting protection.Megaware SkegPro® Skeg ProtectorMegaware SkegPro® protects your motor's skeg against harsh marine environments. It conforms to your lower unit to ensure there is no discernible drag or compromise in performance. A drain hole keeps water from collecting and remaining stagnant. Skeg Pro®'s mirror-polished finish creates a custom look and lasting protection.Megaware SkegPro® is available in models to fit virtually any skeg.WarrantyMegaware guarantees your Megaware SkegPro® for a period of three years from the date of purchase. Please retain receipt for proof of purchase date.Features: Protects Against Ramp Dragging, Rock, Debris, and Submerged Objects Drain Hole Prevents Corrosion and Freezing A Model to Fit Virtually Any Skeg Do-It-Yourself Install in Less than 10 Minutes Specifications: Color: Stainless Box Dimensions: 1"H x 6"W x 16"L WT: 0.85 lbs UPC: 672057026564 Brochure (pdf)

Read more less

Pontoon Mirror/Bracket Kit w/VR-100 Pro & PCX-200 (Silver)The Pontoon Mirror System includes a bracket and mirror.  It is a mirror system designed specifically for the pontoon pilot.  The convex mirror provides a wide viewing angle and the precision-machined bracket provides a rigid lock for superior stability in rough waters. The VR-100 PRO mirror is a Black 6″ x 14″ HD Prescription-Grade Mirror.The PCX-200 bracket is made from 6061-T6 aerospace aluminum.  The clamp-on design provides a solid foundation secured to the pontoon rail with a 3M ultra-high bond, pressure-sensitive adhesive, and stainless steel set screws.  No drilling is required. In the Box: VR-100 PRO (Black) PCX-200 Mirror Bracket (Silver) Set Screws x 2 Ultra-High Bond, Pressure-Sensitive Adhesive  Easy-to-Follow Installation Instructions with Mounting Template *Does not include cover*Sold as an Individual Quick Guide (pdf)Brochure (pdf)

Read more less

Dress White 4" GPS Speedometer - 60 MPHPerimeter-lighted White dial with bold Black graphics, White aluminum bezel, contoured Black pointer and flat glass lens.The GPS Speedometer is a drop in replacement for your current speedometer to match your existing instrument dash.GPS information is gathered from an internal GPS antenna. No external antenna required. The Faria GPS Speedometer uses a highly accurate 48 channel GPS receiver. You can be sure that the Faria GPS Speedometer is giving you the most accurate GPS information available on the market today.Course Over Ground (COG) and actual heading (compass heading over ground) are displayed on the optional digital LCD.Speed data is shown by an analog pointer. This pointer is driven by a digital stepper motor for increased accuracy and minimized pointer bounce during vessel operation.4" - Hole Size: 3.375" (85mm)Features: Anti-scratch glass lens 12 VDC negative ground Can be adapted for 24 VDC systems Dual Scale - Imperial and Metric Factory P/N SGP111*Sold as an Individual**Gauge Cover not IncludedThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Gauge Type: Speedometer Gauge Size: 4" Series: Dress White Box Set: No Voltage - Input Range (Volts): 12/24 V Box Dimensions: 5"H x 5"W x 6"L WT: 0.55 lbs UPC: 759266331471

Read more less

Thru-Hull Installation Tool Thru Hull Installation ToolThe Concept:THT-530 makes the installation of standard GROCO thru-hull fittings possible by a single installer.  Slide the thru-hull fitting, flanged end first, over the tool.  (It will stop at the proper step.)  Tie a length of monofilament to the eye and place it into the already-cut hole in the hull of the boat.  Apply caulking to the flange of the fitting, and pull the fitting through the hole and against the hull from inside the boat.  Thread the mono-filament through the locknut or seacock. With the fitting pulled firmly against the hull the locknut or the seacock may be screwed onto the fitting.THT-530 fits GROCO Thru-hull Fitting Sizes from 1/2" through 3"

Read more less

Chesapeake White SS Boxed Set - Inboard MotorsPerimeter-lighted White dial with stylish Blue and White graphics, polished stainless steel bezel, contoured White pointer and domed glass lens.  Packaged and ready for the display counter. This 6 Gauge Boxed Sets offer a complete set of gauges ready to install.Inboard Motors Boxed Set Includes: Speedometer (60 MPH) (Mechanical) Tachometer (6000 RPM) Fuel Level (E-1/2-F) Voltmeter (10-16 VDC) Water Temp (100-250 F) Oil PSI (80 PSI) Factory P/N KTF001*Sold as a Box Set**Gauge Covers not IncludedThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Gauge Type: Box Set Series: Chesapeake White Voltage - Input Range (Volts): 12/24 V Box Set: Yes Box Dimensions: 7"H x 10"W x 21"L WT: 4.8 lbs UPC: 759266000018

Read more less

Euro Black Boxed Set - Outboard MotorsPerimeter-lighted Black dial with bold White graphics, Black aluminum bezel, contoured White pointer, and flat glass lens.Packaged and ready for the display counter. This 4 Gauge Boxed Set offers a complete set of gauges ready to install.Outboard Motors Boxed Set Includes: Speedometer (55 MPH) (Mechanical) Tachometer (7000 RPM) Fuel Level (E-1/2-F) Voltmeter (10-16 VDC) Factory P/N KT9796*Sold as a Box Set**Gauge Covers not Included This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Gauge Type: Box Set Series: Euro Black Voltage - Input Range (Volts): 12/24 V Box Set: Yes Box Dimensions: 6"H x 10"W x 21"L WT: 4.3 lbs UPC: 759266097964

Read more less

Top-Mounted Flag Pole Socket Polished Brass - 3/4" IDFeatures: Polished Brass Top Mounted Flag Pole Socket Tube I.D. - 3/4" Base - 2" Height - 1-3/4" Fastener - #6(3) Specifications: Type: Flags & Flag Poles Box Dimensions: 2"H x 4"W x 6"L WT: 0.25 lbs UPC: 725060500139

Read more less

Masterdrive™ 32CC Front Mount HelmFeatures: Available in two different displacement sizes: 32 cc (1.95 cu.in) and 40 cc (2.44 cu.in) Front Mount and Tilt Mount versions The dual station installation version is also available (please refer to the MD2 Kit) Built-in relief valve 3/4” tapered shaft Corrosion-resistant painted body Waterproof Tilt Mount version is suitable for use with X66-40613 M tilt mechanism Specifications: Mounting: Front Mount Application: Single Cylinder Number of Stations: 1 Maximum Wheel Diameter: 406 mm - 16" Displacement/Revolution: 32cc - 1.95 cu. in. This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

1-1/4" Flush Mount Flag Pole Socket Made from beautiful long lasting T316 polished stainless steel Insets nearly flush to the deck 60° angle Specifications: Type: Flags & Flag Poles Box Dimensions: 3"H x 4"W x 6"L WT: 0.6 lbs UPC: 040011285478

Read more less

2.75" x 40 Yards - 180 Grit Ceramic Sandpaper - 1 RollSEM Performance Abrasives are specifically designed for today’s complex automotive repairs. The abrasive products incorporate “precision grain technology,” which provides fast cutting, long life, and a consistent finish on all substrates.Features: Ceramic grain Easy to tear to size C-weight paper Quick Guide (pdf)Brochure (pdf)

Read more less