Power Cable ExtensionPower extension cable for modules connectionOne each mechanical actuator or shift unitLength: 1M (3.3') Quick Guide (pdf)Brochure (pdf)

Read more less

Power Unit - 42026 GGrants the power supply up to 4 modules with the input combination of up to 2 batteries, 12 and 24V.Required for all Power A Mark II installations.IP protection: IP65Dim.: 205mm x 110mm (8" x 4.3") Quick Guide (pdf)Brochure (pdf)

Read more less

Spring-Lock™ 9" Round Base SatinFeatures: 8″ hole pattern, high-strength aluminum Below the deck mount (requires a 4″ hole in the deck) Use with any Spring-Lock™ or Clip-Lock post (sold separately) Warranty: 5 Years WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

KingPin™ Power-Rise Stand-Up Package Standard PinFeatures: Standard Power-Rise Stand-Up Post (1611431-S) Quik-Tilt Seat Mount (1615254-EC) Gray, Pro Stand-Up Seat (1040213) Adjusts From 23-1/2″ To 30-1/2″ Use With Standard KingPin™ Base (sold separately) Rated ABYC Class H-31 B (Fishing Only)  WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Adjustable Folding Drink Holder - 304 Stainless SteelThe Adjustable Folding Drink Holder folds to a closed depth of 3/4”. Accommodates drink containers up to 3-7/8" in diameter. Constructed of corrosion resistant stamped 304 stainless steel. Installs with two #8 RH fasteners (not included).WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Nav-Tracker 1.0 with 30' Cable - Insurance PackageGOST Nav-Tracker 1.0 IDP was developed to offer a hardwired marine grade, water resistant, monitoring and tracking system that provides global arm/disarm over satellite from anywhere in the world.GOST Satellite NAV-Tracking delivers total peace of mind. The award-winning satellite tracking packages, powered by Inmarsat’s geostationary satellites constellation, provide you with the option to securely monitor your boat from anywhere in the world with 99.99% reliability.Features: Satellite Antenna IDP Push-Button Arming Switch Remote Access & Monitoring Standard 30ft GPS Cable Included Package Includes: Nav-Tracker 1.0 IDP SAT/GPS Tracking Device 30' Antenna cable GNT-L-Bracket Antenna Gunwale/Bulkhead Mount GNT-1.0-Push Button arm/disarm Brochure (pdf)

Read more less

Motor CaddyMotor Caddy is sized to be quickly attached to most outboards from 2-15 horsepower. This improved design features a longer strap to fit 4-stroke motors and an added security strap for today's streamlined engine cases. Made of UV resistant materials that will endure the marine environment for those who prefer a semi-permanent installation. Glass filled nylon buckles insure that Motor Caddy is easy to install and remove. Makes lifting and moving cumbersome motors safer and simpler. Quick Guide (pdf)

Read more less

52MM OceanLink Bezel - Round - BlackThe Oceanlink modular bezel concept offers true design flexibility in the layout of instrument panels.  The three attractive designs in Black, White or Chrome are suitable for every machinery instrument panel or special vehicle cockpit. Each of the bezel designs is compatible with 52MM OceanLink products.Features: Color - Black Bezel Profile - Round Size - 52mm Interchangeable Clip System *Sold as an IndividualThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Color: Black Diameter (mm): 52 Box Dimensions: 1"H x 4"W x 7"L WT: 0.05 lbs UPC: 7640178721517

Read more less

Modular Plate for Most Closed Dome and Open Array RadarsSeaview Modular Top Plates are designed to be mounted onto Seaview Modular Mounts. These Top Plates eliminate the "swiss cheese" look of most other radar and satdome mounts. With Seaview Top Plates the result is only four visible mounting screws to secure electronics.Unique DesignNo longer the unwanted “swiss cheese” look with a Seaview modular top plate. These plates result in only 4 visible mounting screws to secure electronics. A anodized 1/4" thick aluminum plate is pre-drilled to fit most marine electronics. This aluminum plate is then encased in a UV stable glass filled ABS white plastic. Each top plate is dimpled to match the provided drill templates for easy and precise drilling for your specific marine electronics. Specifications: Construction: Aluminum Type: Adapters Box Dimensions: 3"H x 13"W x 13"L WT: 4.6 lbs UPC: 839662009119 Quick Guide (pdf)

Read more less

Universal Mast Mount Platform for 12"18" RadomeSeaview Mast Mounts are designed to have the radar or satdome as close as possible to the mast. Ultra heavy duty mounting feet and rivets are used to secure the Mast Mount to the mast.AdjustableDesigned with fore and aft adjustable rails so that you can have the radar as close as possible to the mast.Incredible StrengthThe solid under body construction not only greatly improves strength but also hides radar cables. On certain models.AccessoriesPre-drilled under body allows for flood lights or horns to be mounted on certain models.Compatible Manufacturers: Furuno JRC Koden Lorenz Sitex VDO Specifications: Type: Mast Mount Box Dimensions: 5"H x 9"W x 17"L WT: 5.1 lbs UPC: 839662005234 Quick Guide (pdf)

Read more less

C5 Certified Light Bar Top with LTBLED12C5 Masthead Light & Threads for GPSUniversal light bar top for GPS or wind instrument with 12" light post and LED navigation light (LTBU1A + SVLTP12 + LTBLED12C5). Specifications: Height: 12" Type: Light/GPS Brackets Box Dimensions: 5"H x 9"W x 16"L WT: 2.2 lbs UPC: 850073256008

Read more less

5" Aft Leaning Mount with ADAR1 Top PlateThis Seaview Modular Radar Mount works with 18" - 24" closed dome radars. The modular design allows you to add various accessories and different top plates at any point, thus making it a cost-effective choice. Included ADAR1 Top PlateSeaview Modular Top Plates are designed to be mounted onto Seaview Modular Mounts. These Top Plates eliminate the "Swiss cheese" look of most other radar and satdome mounts. With Seaview Top Plates the result is only four visible mounting screws to secure electronics. Specifications: Height: 5" Type: Aft Leaning Mount Box Dimensions: 10"H x 14"W x 14"L WT: 12.1 lbs UPC: 727908835588

Read more less

Complete Spreader Kit for Radars & Satdomes for Mounts Ending in M2This three-piece kit consists of a mid-section and two spreaders. Four bolts are used to secure each spreader to the midsection. The spreaders are tapered and angled aft so that whatever you decide to put on there will not interfere with the radar or satdome that you have on your mount. All the wiring from your GPS unit or antenna can be routed internally through the spreaders and into the mount itself. Not only does this help with security but it also makes for a very nice and clean installation. All the parts that make up the spreader kit are bolted together with rubber gaskets in between each part to prevent any water intrusion. Each spreader kit now comes with two S.S. 1-14 threaded adapters (SP7SS). Quick Guide (pdf)

Read more less

Inboard HD Flush BuddyEasy to use inboard motor flusher. Great for winterizing, maintenance or anytime you need to run your inboard engine while out of the water. Just connect the garden hose, fit the cup over the water intake and extend the leg sealing cup to the hull. Constructed of aluminum and heavy duty rubber. Conveniently adjustable from 19" to 30-1/4".

Read more less

Weatherproof Cover with Lift LidThis yellow LEXAN® polycarbonate with lift lid is for use with Marinco receptacles. WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Misc Box Dimensions: 3"H x 3"W x 5"L WT: 0.3 lbs UPC: 093344008504

Read more less

Elastometric 3 oz (89ml) Sealant Tube - ClearA one-part, fast skinning (10 minutes) and fast curing (24 hours) multi-purpose marine grade sealant with superior strength, adhesion, elongation and life characteristics. Cures in temperatures of -20°F (-28.9°C) to 120°F (-48.9°C) and can be wet sanded and painted after curing. Flexibility and compression capabilities are excellent. Heavy duty use above or below the waterline. Twists, bends, expands, compresses. Seals ports, beds hardware, stops leaks. Resistant to teak cleaners, oil, diesel fuel and salt water. Adheres tenaciously without primers to fiberglass, glass, plastic, metal and wood. Simple clean up with mineral spirits. Not recommended for wooden deck seams or use in areas subject to gasoline.Features: Twists, bends, expands, compresses Seals ports, bed hardware and stops leaks Perfect for trim tabs and transducers WARNING: This product can expose you to chemicals including Toluene which is known to the State of California to cause birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

12" ATLAS™ Hole Shot Plate with Transducer Cut OutT-H Marine ATLAS™ Hydraulic Jack Plate - 12" setback AHJ-12V-DP is truly the next generation in jack plate design, built for the heaviest and most powerful V6 engines on the market today, even the big four strokes. Our innovative high tech engineered polymer rod and slot lifting design guarantees trouble free action.  This plate also features the best concept in one-piece hydraulics from the most respected name in hydraulic design, providing the best of all worlds: Speed and Self contained lifting action.  This pump will lift the heaviest outboard from bottom to top in less than 8 seconds.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Happy Troller - Small PlateSmall Troller: Fits outboard motors from 20 - 50hpFor the Fisherman who thinks he has everything!Slows even big motors down to that "ever-so-slow" fish tantalizing speed.A significant invention in the sport of troll fishing, Happy Troller® mounts on the anti-cavitation plate to allow fine control of trolling speed. At cruising speed, your boat's stability is enhanced.Locks in "down" position for trolling.Locks in "up" position for cruising.Happy Troller is the answer to correct trolling speed. Use it year-round in all boating activities; salt and fresh water.Key Features: Reduces troll speed in "down" position Acts as a stabilizer in "up" position Maintains stability in bow-light boats Smooths out ride in rough water Reduces porpoising and cavitation Made of only highest quality stainless steel and marine aluminum; clear anodized aluminum finish Installs in 15 minutes Stainless steel mounting hardware and installation & operating instructions provided with each unit Owner's Manual (pdf)

Read more less

Ultra Cutting Creme Light - GallonThe perfect compound for light damage and swirls. Less aggressive than our best-selling Ultra Cutting Creme. Follow with Presta Swirl Remover for a flawless finish in just two steps.Ultra Cutting Creme Light is designed to remove 2000-grit and finer sand scratches from any painted surface - from soft, freshly painted to fully cured. Features:  Contains NO fillers, waxes or silicones Designed for use with a high-speed, rotary buffer. For best results use with Presta Yellow Wool Buffing Pad. Follow with Presta Swirl Remover to maximize gloss and shine. Cleans up easily – water-based formula. Specifications: Type: Restoration & Compounds Box Dimensions: 5"H x 7"W x 12"L WT: 9.3 lbs UPC: 075929434014

Read more less

Taper-Lock 9" - Round Surface MountFeatures: 9″ Surface Mount Base, 8″ Hole Pattern High-Strength Aluminum To Withstand All Conditions Surface Mount Does Not Require A Hole In Deck Use With Any Taper-Lock™ Post (sold separately) WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Rotary Blended Wool Buffing Pad - Yellow Medium CutBlended wool, medium cut compounding pad effectively removes 2000 grit and lighter sanding scratches on fresh paint, choose the size and connection type to fit your needs.  Hook & Loop Pads: Single-sided pad is 9" in diameter and features Specifications: Type: Buffers & pads Box Dimensions: 2"H x 9"W x 9"L WT: 0.4 lbs UPC: 075929701420

Read more less

SVS HP Hose Kit - 12'Two high-pressure Kevlar stranded flexible hoses with pre-crimped fittings and bend restrictors on both ends. Recommended for use with all Ultraflex SilverSteer™ and MasterDrive™ helms with 1500 psi relief valves.

Read more less

PACE™ Ultimate Polish - 32ozPACE™ Ultimate Polish is specially formulated for use with orbital polishers. It is a finishing polish to be used for light correction or as a final showroom gloss after PACE™ Heavy Cut Compound or PACE™ Medium Cut Compound.Features & Benefits: Significantly increases depth of gloss Applies easily; removes simply Dust-free application Usage: Apply four, 1/4” (6.25mm) drops of PACE™ Ultimate Polish to the pad and spread on surface using your orbital polisher set to 1 or the lowest setting Once the area is covered, turn orbital polisher up to 3 or the medium setting and with light to no pressure work the product from opaque to clear to ensure you have broken down the abrasives and have brought the surface to a deep gloss Do not buff to a dry surface Wipe surface with a clean ultra-soft microfiber cloth Specifications: Type: Waxes & Polishes Box Dimensions: 3"H x 3"W x 11"L WT: 2.3 lbs UPC: 075929433321 Quick Guide (pdf)Brochure (pdf)

Read more less

KeelGuard® - 4' - RedThe Original Do-It-Yourself Keel Protector - Protect Your Investment Against Sand, Rocks & RampsWear and damage to your boat’s keel can break down its protective gelcoat finish, allowing water to reach and destroy the fiberglass laminates. Megaware KeelGuard®, the powerful abrasion-resistant protector, prolongs the life of your boat like nothing else.Megaware KeelGuard® EngineeringEvery aspect of the Megaware KeelGuard® has been designed with boat designers and 3M® engineers. Many factors contribute to its success. A precise, abrasive-resistant blend of polymers and urethanes achieve optimal durability and pliability. A pressure-sensitive adhesive creates strength, while permanently bonding and sealing Megaware KeelGuard®’s contoured edges to the hull surface. Angled grooves produce hydrodynamic channels, creating air pockets and providing a slicker surface. The perfect combination of these factors makes the Megaware KeelGuard® the easiest keel protector to install, and gives it unparalleled quality and dependability.Megaware KeelGuard® Colors & SizesMegaware KeelGuard® comes in 11 great looking colors to match virtually any boat. All colors are UV-stabilized for true color that lasts a lifetime. Megaware KeelGuard® is available in nine standard lengths or can be ordered in custom lengths.Lifetime WarrantyMegaware guarantees this Megaware KeelGuard® (to the original purchaser), against abrasive wear and adhesion failure during normal use of your boat, for as long as you own your boat.Features: Color: Red KeelGuard® Size: 4' Boat Size up to 14' 3M® Technology 3M® Acrylic Pressure-Sensitive Adhesive Pliable & Tough Research & Technology Contoured Edge Protect Against Abrasive Sand, Rocks, Concrete Ramps and Oyster Beds Eliminate Costly Repairs Enjoy the Highest Quality and Superior Engineering Increase the Value of Your Boat 5” Width: Contact for Custom Sizes Made in the USA Specifications: Length: 4' Color: Red Boat Length - Max (Feet): 14' Box Dimensions: 4"H x 9"W x 12"L WT: 1 lbs UPC: 672057208045 Brochure (pdf)

Read more less

15' Blue Coiled Hose with Adjustable NozzleFeatures: 15' Blue Coiled Hose with Nozzle Male fitting: 3/4" Female Fitting: 3/4" Material: Polyrethane Hose Specifications: Type: Tools & Accessories Box Dimensions: 5"H x 7"W x 17"L WT: 1.35 lbs UPC: 725060044039

Read more less

Three Mug Rack 11-1/8"L x 3-1/2"H x 4-1/8"D Holds mugs or cans in insulated drinkholders

Read more less

Brite Bonnet Pro Final Polish Pad - Shag Microfiber f/Pro Version PolishersThe Brite Bonnet PRO is a shaggy microfiber pad used to remove excess wax and buff your surface to a final shine. For best results, use at the slowest speed setting.For best results, use the Bright Bonnet Pro Final Finish Pad on your polisher lowest speed setting. The pads large size may cause loss of control at higher speeds.Specifications:7 1/2" Microfiber Pad*For use with the Dual Action Polisher and Pro Rotary Polisher Specifications: Type: Buffers & pads Box Dimensions: 2"H x 9"W x 9"L WT: 0.2 lbs UPC: 703485121030

Read more less

Shur-Lok SQUEEGEES24" Floor SqueegeeStainless Steel Construction Specifications: Type: Tools & Accessories Box Dimensions: 1"H x 11"W x 24"L WT: 1.77 lbs UPC: 703485714249

Read more less

150mm 6" Sanding Disc 240 Grit - Box of 50SEM Performance Abrasives are specifically designed for today’s complex automotive repairs. The abrasive products incorporate “precision grain technology,” which provides fast cutting, long life, and a consistent finish on all substrates.Features: Film backing Semi-open ceramic blend Standard P grade grit Fast cutting Exceptional edge wear Consistent scratch Specifications: Type: Sandpaper/Discs Box Dimensions: 2"H x 6"W x 6"L WT: 1 lbs UPC: 646786960543 Quick Guide (pdf)Brochure (pdf)

Read more less

AVS 150mm 6" Sanding Disc 600 Grit - Box of 50SEM Performance Abrasives are specifically designed for today’s complex automotive repairs. The abrasive products incorporate “precision grain technology,” which provides fast cutting, long life, and a consistent finish on all substrates.Features: Film backing Semi-open ceramic blend Standard P grade grit Fast cutting Exceptional edge wear Consistent scratch Advanced Venting System (AVS) Specifications: Type: Sandpaper/Discs Box Dimensions: 2"H x 6"W x 6"L WT: 1 lbs UPC: 646786960475 Quick Guide (pdf)Brochure (pdf)

Read more less

150mm 6" Sanding Disc 340 Grit - Box of 50SEM Performance Abrasives are specifically designed for today’s complex automotive repairs. The abrasive products incorporate “precision grain technology,” which provides fast cutting, long life, and a consistent finish on all substrates.Features: Film backing Semi-open ceramic blend Standard P grade grit Fast cutting Exceptional edge wear Consistent scratch Specifications: Type: Sandpaper/Discs Box Dimensions: 2"H x 6"W x 6"L WT: 1 lbs UPC: 646786960567 Quick Guide (pdf)Brochure (pdf)

Read more less

AVS 150mm 6" Sanding Disc 40 Grit - Box of 50SEM Performance Abrasives are specifically designed for today’s complex automotive repairs. The abrasive products incorporate “precision grain technology,” which provides fast cutting, long life, and a consistent finish on all substrates.Features: Film backing Semi-open ceramic blend Standard P grade grit Fast cutting Exceptional edge wear Consistent scratch Advanced Venting System (AVS) Specifications: Type: Sandpaper/Discs Box Dimensions: 2"H x 6"W x 6"L WT: 2 lbs UPC: 646786960383 Quick Guide (pdf)Brochure (pdf)

Read more less

AVS 150mm 6" Sanding Disc 120 Grit - Box of 50SEM Performance Abrasives are specifically designed for today’s complex automotive repairs. The abrasive products incorporate “precision grain technology,” which provides fast cutting, long life, and a consistent finish on all substrates.Features: Film backing Semi-open ceramic blend Standard P grade grit Fast cutting Exceptional edge wear Consistent scratch Advanced Venting System (AVS) Specifications: Type: Sandpaper/Discs Box Dimensions: 2"H x 6"W x 6"L WT: 1 lbs UPC: 646786960406 Quick Guide (pdf)Brochure (pdf)

Read more less

AVS 150mm 6" Sanding Disc 400 Grit - Box of 50SEM Performance Abrasives are specifically designed for today’s complex automotive repairs. The abrasive products incorporate “precision grain technology,” which provides fast cutting, long life, and a consistent finish on all substrates.Features: Film backing Semi-open ceramic blend Standard P grade grit Fast cutting Exceptional edge wear Consistent scratch Advanced Venting System (AVS) Specifications: Type: Sandpaper/Discs Box Dimensions: 2"H x 6"W x 6"L WT: 1 lbs UPC: 646786960451 Quick Guide (pdf)Brochure (pdf)

Read more less

150mm 6" Sanding Disc 120 Grit - Box of 50SEM Performance Abrasives are specifically designed for today’s complex automotive repairs. The abrasive products incorporate “precision grain technology,” which provides fast cutting, long life, and a consistent finish on all substrates.Features: Film backing Semi-open ceramic blend Standard P grade grit Fast cutting Exceptional edge wear Consistent scratch Specifications: Type: Sandpaper/Discs Box Dimensions: 2"H x 6"W x 6"L WT: 2 lbs UPC: 646786960512 Quick Guide (pdf)Brochure (pdf)

Read more less

150mm 6" Sanding Disc 220 Grit - Box of 50SEM Performance Abrasives are specifically designed for today’s complex automotive repairs. The abrasive products incorporate “precision grain technology,” which provides fast cutting, long life, and a consistent finish on all substrates.Features: Film backing Semi-open ceramic blend Standard P grade grit Fast cutting Exceptional edge wear Consistent scratch Specifications: Type: Sandpaper/Discs Box Dimensions: 2"H x 6"W x 6"L WT: 2 lbs UPC: 646786960536 Quick Guide (pdf)Brochure (pdf)

Read more less

AVS 150mm 6" Sanding Disc 240 Grit - Box of 50SEM Performance Abrasives are specifically designed for today’s complex automotive repairs. The abrasive products incorporate “precision grain technology,” which provides fast cutting, long life, and a consistent finish on all substrates.Features: Film backing Semi-open ceramic blend Standard P grade grit Fast cutting Exceptional edge wear Consistent scratch Advanced Venting System (AVS) Specifications: Type: Sandpaper/Discs Box Dimensions: 2"H x 6"W x 6"L WT: 1 lbs UPC: 646786960437 Quick Guide (pdf)Brochure (pdf)

Read more less

150mm 6" Sanding Disc 500 Grit - Box of 50SEM Performance Abrasives are specifically designed for today’s complex automotive repairs. The abrasive products incorporate “precision grain technology,” which provides fast cutting, long life, and a consistent finish on all substrates.Features: Film backing Semi-open ceramic blend Standard P grade grit Fast cutting Exceptional edge wear Consistent scratch Specifications: Type: Sandpaper/Discs Box Dimensions: 2"H x 6"W x 6"L WT: 1 lbs UPC: 646786960574 Quick Guide (pdf)Brochure (pdf)

Read more less

150mm 6" Sanding Disc 600 Grit - Box of 50SEM Performance Abrasives are specifically designed for today’s complex automotive repairs. The abrasive products incorporate “precision grain technology,” which provides fast cutting, long life, and a consistent finish on all substrates.Features: Film backing Semi-open ceramic blend Standard P grade grit Fast cutting Exceptional edge wear Consistent scratch Specifications: Type: Sandpaper/Discs Box Dimensions: 2"H x 6"W x 6"L WT: 1 lbs UPC: 646786960581 Quick Guide (pdf)Brochure (pdf)

Read more less

150mm 6" Sanding Disc 40 Grit - Box of 50SEM Performance Abrasives are specifically designed for today’s complex automotive repairs. The abrasive products incorporate “precision grain technology,” which provides fast cutting, long life, and a consistent finish on all substrates.Features: Film backing Semi-open ceramic blend Standard P grade grit Fast cutting Exceptional edge wear Consistent scratch Specifications: Type: Sandpaper/Discs Box Dimensions: 2"H x 6"W x 6"L WT: 2 lbs UPC: 646786960499 Quick Guide (pdf)Brochure (pdf)

Read more less

150mm 6" Sanding Disc 180 Grit - Box of 50SEM Performance Abrasives are specifically designed for today’s complex automotive repairs. The abrasive products incorporate “precision grain technology,” which provides fast cutting, long life, and a consistent finish on all substrates.Features: Film backing Semi-open ceramic blend Standard P grade grit Fast cutting Exceptional edge wear Consistent scratch Specifications: Type: Sandpaper/Discs Box Dimensions: 2"H x 6"W x 6"L WT: 1 lbs UPC: 646786960529 Quick Guide (pdf)Brochure (pdf)

Read more less

AVS 150mm 6" Sanding Disc 500 Grit - Box of 50SEM Performance Abrasives are specifically designed for today’s complex automotive repairs. The abrasive products incorporate “precision grain technology,” which provides fast cutting, long life, and a consistent finish on all substrates.Features: Film backing Semi-open ceramic blend Standard P grade grit Fast cutting Exceptional edge wear Consistent scratch Advanced Venting System (AVS) Specifications: Type: Sandpaper/Discs Box Dimensions: 2"H x 6"W x 6"L WT: 1 lbs UPC: 646786960468 Quick Guide (pdf)Brochure (pdf)

Read more less

Ceramic Sealant Spray Bottle 236ml/8ozA unique product for Flitz! This is a hydrophobic spray (meaning, immediate repelling of water) that is safe on All Metals, Fiberglass, Clear Coats, All Paints, Plastics, Granite, Glass, And All Man-Made Hard Surfaces. It helps protect against salt, UV rays, water stains, bugs, bird droppings, and yellowed headlights. A completely water-based formula producing NO SWIRLS.Creates a "ceramic shell" type coating, preventing any harmful/damaging absorption from occurring to your surface.Protects for up to 8 months to a year and covers 1,100 sq. ft.! Body Shop Safe, and most importantly... THIS IS NOT A WAX!How to Use: Spray on  Wipe with Flitz Microfiber Polishing Cloth For BEST RESULTS, Apply Second Coat After 48 Hours Specifications: Type: Tools & Accessories Box Dimensions: 3"H x 3"W x 12"L WT: 0.8 lbs UPC: 065925029086 Quick Guide (pdf)

Read more less

Hustler® - Right Hand - Aluminum Propeller - H2-1117 - 3-Blade - 11.75" x 17 PitchTurning Point has built their reputation on a relentless focus on engineering the best performing aluminum propellers in the World. Utilizing state-of-the-art Squeeze Casting technology, they produce Hustler 3 Blade Propellers that run as fast as their competitors' Stainless Steel Props, and even sometimes faster! Super stiff metallurgy, unique blade geometry, aggressive pitch, rake, and cup all give you the best they can offer: Stainless Performance at Aluminum Prices! Not only does top speed, handling and hole shot improve, but also mid-range performance, which will save you a ton in gas usage. If you want the most your boat and engine combination can offer, then the Hustler 3 Blade delivers.The Three Blade Hustler is great for boaters looking to get the most top end out of their boat, and offer excellent bow lifting capabilities. These props are perfectly matched to mid-range horsepower pontoons, fishing, ribs, and tiller boats. It will fit all 6-75hp outboards with 2.5", 3", and 3.5" gearcases from all engine manufacturers.Squeeze Cast for Added StrengthStainless steel performance is built into the Hustler Aluminum prop line. This is achieved through unique blade geometry and an exclusive Turning Point manufacturing process, Squeeze Casting. This process generates the highest mechanical properties attainable in a cast aluminum prop resulting from high density tighter grain structure. Stiffer blades means less flex and a faster prop. Competitors' Aluminum propellers are manufactured utilizing old Die-Cast process that produces props with air bubble, voids, and granularity. Weak, lack of strength and stiffness. Difficult to repair. Blades Flex under load, inefficient, loss of propulsive efficiency.Long Lasting Ultracoat™ Powder Coated FinishExclusive to Turning Point, the Ultracoat powder coat rivals a fine automotive finish, and is more durable than paint. Utilizing a state-of-the-art five step process, Ultracoat gives the propeller a shiny, uniform appearance that enhances any boat's good looks. This is the Gold Standard in Aluminum Corrosion Protection. Prop looks Newer Longer! Compared to Competitors' 4 step Paint and Coating Processes that result in much less abrasion and corrosion resistance.Large Free Flowing Exhaust PortsTurning Point's Propeller Housings have massive Exhaust flow pathways. Their Propellers have 40% more exhaust flow Area versus competive product. More exhaust flow and less backpressure can generate more horsepower. Like headers for your boat.Turning Point manufactures Hustler propellers to fit 6-300+hp Evinrude®, Force®, Honda®, Johnson®, Mariner®, Mercruiser®, Mercury®, Nissan®, OMC®, Parsun®, Suzuki®, Tohatsu®, Volvo® Penta®, and Yamaha® Outboards and Sterndrives. Choose one of our Lifetime Warranty MasterGuard Installation Kits to fit your engine, then choose the propeller that matches your boating requirements. There are 3 and 4 blade, left and right rotation prop models with a variety of diameter and pitch options available for almost all boat types. Turning Point's Props Run Faster, Pull Harder, and Handle Better.Note: A Hub Kit is required for installation of this propeller. See the Turning Point Selection Chart or the Prop Wizard™ for hub kit selection.  WARNING: This product can expose you to chemicals including CARBON BLACK which is known to the State of California to cause cancer, and LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Diameter (Inches): 11-3/4" Material: Aluminum Pitch: 13 Rotation: Right Box Dimensions: 6"H x 13"W x 14"L WT: 4.1 lbs UPC: 652480100826 Quick Guide (pdf)Brochure (pdf)

Read more less

Ultra Polish (Chroma 1500) - 32ozRemoves minor surface imperfections, compounding marks and oxidation from new or aged automotive paint, gel coat and marine coatings.With no waxes, fillers or silicones that hide defects, Ultra Polish creates an extremely high gloss finish that won't wash away.Features:Reliable polishCleans and removes minor surface imperfections & oxidationEasy to work with formula Leaves no hard-to-remove residue Produces a beautiful smooth, high-gloss finish Contains no fillers, waxes or siliconesLeaves deep, high-gloss finishVOC Compliant Eco-friendly Compliant with VOC regulations Specifications: Type: Waxes & Polishes Box Dimensions: 3"H x 4"W x 10"L WT: 2.3 lbs UPC: 075929435325 Quick Guide (pdf)Brochure (pdf)

Read more less

PL-45 High-Speed Hydraulic Jack Plate 5-1/2" without GaugeThe CMC High Speed Hydraulic Power-Lift Transom Jack offers unmatched lifting capability and durability for boat motors up to 300 hp. Its innovative design includes a fully self-contained hydraulic actuator, ensuring hassle-free operation and maintenance. Ideal for freshwater and saltwater environments, this powerful jack elevates with ease. Maximum lifting capacity of 7853 pounds for high-performance motors. Fully self-contained hydraulic system eliminates hoses and tanks. Patented roller design minimizes friction and maintenance, preventing binding.

Read more less

Ladder Lock - BrassThese highly polished Ladder Locks are commonly used with wooden step ladders. Ladder slips into tapered locks and becomes secure as it is lowered in to place. Constructed of cast brass with a plain finish. Installs with eight #10 FH fasteners (not included). WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

HEXX™ Gunnel Track MountEffortlessly install a RAILBLAZA HEXX™ live transducer pole, HEXX heavy-duty fish finder, or the strike-ready HEXX Rod Holder into gunnel track systems. Solidly constructed from durable materials, the clever HEXX Gunnel Track Mount features a wide stabilizing collar to securely tighten down the mount for a rock-solid installation. Multiple bolt holes provide differing height and offset options for the ideal customized setup.HEXX Gunnel Track Mount fits perfectly with the RAILBLAZA TracLoader Gunnel Track, Crestliner SureMount, Tracker VersaTrack, Lund Sport Trak, Lowe Boats, Princecraft PrinceTrak, Xpress Boats, War Eagle, G3, Ranger, Stessl, Horizon boats and many more.Effortlessly install a RAILBLAZA HEXX™ live transducer pole, HEXX heavy-duty fish finder, or the strike-ready HEXX Rod Holder into gunnel track systems. HEXX Gunnel Track Mount Overview:Effortlessly install a RAILBLAZA HEXX™ live transducer pole, HEXX heavy-duty fish finder, or the strike-ready HEXX Rod Holder into gunnel track systems.Features: Fit heavy-duty RAILBLAZA HEXX™ products to the gunnel tracks of your boat including Tracker, Crestliner, and many more! Compatible with HEXX Live Pole 60 & Live Pole 30, HEXX Fish Finder Mount, HEXX RotatingPlatform, and HEXX Rod Holder Specifications: Weight: 1.00 lbs Material Composition: Powder-coated aluminum bracket, fiberglass reinforced nylon components rubber contact pads for paint protection, and stainless steel hardware Parts Included: Aluminum bracket HEXX mount base Stainless hardware

Read more less