Vinyl Prep - 13.3ozVinyl Prep is a strong solvent blend critical to refinishing vinyl. Features: Removes soil, wax and grease Temporarily softens substrate Promotes adhesion of top coat Works quickly Applications:VinylProperties: Available in aerosol or quart containers Clear Ready to use Quick Guide (pdf)

Read more less

Transom Trim Control Push Button Trim SwitchTransom Trim Control Switch/Hydraulic Jack Plate SwitchPut a trim switch or hydraulic jack plate anywhere you want with this versatile switch.  The Transom Trim Control Switch provides a weatherproof tilt control system at the stern area of the boat to facilitate placing motor support in position with one person. Switch can also be used for remote adjustment of hydraulic jack plates. The switch housing is molded black plastic with raised white letters and may be mounted on any flat surface, comes with 18" pigtail wire and installation instructions.Features: Trim switch for outboards or stern drives Hydraulic jack plate switch Puts Tilt & Trim Control Anywhere Weatherproof Control Switches UV stable molded housing Can Also Operate Power Jack Plates WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

LED Flush Mount Combo Drink Holder with Drain Fitting - Red LEDThe corrosion resistant stamped 304 stainless combo LED drink holders feature three LEDs, available in red for night vision. The flush mount dual-purpose design allows the use of beverage cans with or without insulated wraps as well as most standard size bottles. Integral drain fitting allows water to be drained directly into bilge with the use of 1/4" tubing (not included). Requires a 3-5/8" hole for installation. The bottom is padded with a rubber insert to prevent rattling. 12VDC.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

MACH™ Series High Efficiency & Flexibility Engine Control Cable - Mercury Style - 22'MACH5 - Mercury® style (like C5)MACH5 Stroke: 95 mm (3.75”). For Mercury® and Mercruiser® engines. Blue color jacket designed for high performance applicationsFor the ultimate in efficiency and response, the Mach Series cables deliver unmatched results. They have been specifically designed to make even the most complex of cable installations result in smooth, easy and precise shift and throttle movement. Using a stranded wire core with lubricated extrusion, the Mach cables are an ideal solution for applications with long cable runs, tight bends, or where easy and precise throttle response is required. Mach Series cables also feature solid stainless steel output fittings.The “high performance” MACH™ Cables are the result of our decades of experience in producing high quality, long lasting, flexible cables. The innovative core design maximizes efficiency and minimizes lost motion, while the exclusive design of the conduit provides extremely high level of flexibility.Features: Suitable for outboard – inboard and sterndrive engines High efficiency for smooth operation High flexibility for reduced bend radius Ideal for long complex cable routing Maintenance free Stainless steel cables end fittings Blue outer jacket resists against abrasion, UV and chemicals

Read more less

Shur-Lok Adapters10" Curved Adapteradds a 30-degree angle to any of our SHUR-LOK equipped accessories. Two holes at the end provide for 180-degree rotation. Specifications: Type: Tools & Accessories Box Dimensions: 1"H x 3"W x 12"L WT: 0.2 lbs UPC: 703485101025

Read more less

SC50 Adjustable Wedge for Satcom MountsDesigned to work with Scanstrut satcom mounts, you can quickly and easily provide a level mounting surface on any boat.  Satcom antennas require a horizontal mounting surface to function correctly.  Finding this on any powerboat is often difficult.  This satcom wedge, eradicates this problem by providing a level mounting surface on slopes from 0° to 12°.Compatible with:SC35, SC45, SC45R and SC65 satcom mountFeatures: Ingenious yet simple – simply counter-rotate the angled discs until the top surface is horizontal A channel system inside the discs allows un-restricted positioning of the antenna mounting bolts 4 pairs of 6° angled washers provide a level fastening surface for the antenna mounting bolts Watertight base seals fitted Technical Specifications:Material - Marine grade polymerIn the Box: Counter-rotating angled discs 0° to 12° x 2 6° angled washers x 4 Mount seal Instruction manual *Sold as an Individual   Specifications: Construction: Polymer Type: Wedges Height: N/A Box Dimensions: 2"H x 8"W x 9"L WT: 1.45 lbs UPC: 5060114790506 Quick Guide (pdf)

Read more less

SilverSteer™ Universal Front Mount Outboard Hydraulic Tilt Steering System - 1500PSI V2Specifically designed for high performance and high torque applications, the SilverSteer features a 1,500 psi helm and keyed bullhorns on the cylinder for maximum durability and minimal lost motion.Whether a bass boat, flat boat or tournament style offshore fishing boat, the SilverSteer™ will deliver smooth, responsive and precise steering.Adjustable boss style fittings allow precise hose routing without the risk of breaking the fittings by overtightening or leaking fittings from loosening during installation, a common problem on competing cylinders.SilverSteer™ Package Kit Contains:UC130/2-SVS cylinder Quick Guide (pdf)Brochure (pdf)

Read more less

MACH™ Series High Efficiency & Flexibility Engine Control Cable - Mercury Gen II - 10'MACH36 - Gen II Mercury® style (like C36)MACH36 Stroke: 87 mm (3.4”). For Mercury® and Mercruiser® engines and Mercury® Generation II™ series controls. Blue color jacket designed for high performance applicationsFor the ultimate in efficiency and response, the Mach Series cables deliver unmatched results. They have been specifically designed to make even the most complex of cable installations result in smooth, easy and precise shift and throttle movement. Using a stranded wire core with lubricated extrusion, the Mach cables are an ideal solution for applications with long cable runs, tight bends, or where easy and precise throttle response is required. Mach Series cables also feature solid stainless steel output fittings.The “high performance” MACH™ Cables are the result of our decades of experience in producing high quality, long lasting, flexible cables. The innovative core design maximizes efficiency and minimizes lost motion, while the exclusive design of the conduit provides extremely high level of flexibility.Features: Suitable for outboard – inboard and sterndrive engines High efficiency for smooth operation High flexibility for reduced bend radius Ideal for long complex cable routing Maintenance free Stainless steel cables end fittings Blue outer jacket resists against abrasion, UV and chemicals

Read more less

XKA Aluminum Alloy Trim Tab - 12 x 24 The Lectrotab Aluminum Alloy trim tabs are uniquely designed to meet the needs of Aluminum hulled boats and are an economical option for all boats.  All Aluminum Alloy tabs are fabricated with an extremely strong "no-break" polypropylene hinge.  All Aluminum tabs are sealed with a corrosion resistant epoxy coating. Combined with a precision-engineered actuator, this kit is built to combine quiet operation with a non-hydraulic, maintenance free design.  The unit is corrosion free, ensures very accurate tab positioning, provides maximum lift force, and is totally self-contained for easy installation.  The actuator assembly is packaged in a non-metallic permanently sealed housing.  No components need to be installed inside the boat. Most importantly, unlike hydraulic trim tabs, there is no oil to leak out.  The actuator incorporates either a standard or low profile transom mounting bracket. *Control switch not included Features: All Tabs sealed with a corrosive resistant epoxy coating Equivalent strength to 10 gauge stainless steel "No Break" polypropylene hinge tested over 300,000 cycles to a 90° bend without failure Upper ram seal location cannot be damaged due to fouled ram or barnacle growth Utilizes internal pressure equalization system Internal brake system prevents unwanted tab movement when under way or backing down Quiet operation Actuators are fully load tested to push 1000 lbs of force Non-metallic external structure which cannot corrode and will not deteriorate in the sun or under water Technical Specifications: Trim Tab Size (L x W) - 12" x 24" (30 x 61 cm) Boat Length - 28' to 48' (8.5 to 14.5 M) Trim Tab Material - Marine grade 6005-T5 Aluminum Alloy  Actuator DC Voltage - 12 V Actuator Stroke Length - 2.25" (57 mm) Actuator Cable Length  - 23' (7 M) Actuator Vertical Height - 11.875" (302 mm) In the Box: Two (2) Aluminum Alloy tabs Two (2) actuators w/23' (7 M) cables Instruction Manual  *Sold as an IndividualThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Actuator Type: Electro-Mechanical Construction: Aluminum Alloy Box Dimensions: 5"H x 16"W x 24"L WT: 23.7 lbs UPC: 850046155604 Quick Guide (pdf)Owner's Manual (pdf)Brochure (pdf)

Read more less

XKA Stainless Steel Trim Tab - 12 x 24 The Lectrotab stainless steel trim tab design provides unmatched strength and reliability.  All stainless steel tabs are fabricated with a continuous rolled and pinned hinge.  This design eliminates the need for welding. Combined with a precision-engineered actuator, this kit is built to combine quiet operation with a non-hydraulic, maintenance free design.  The unit is corrosion free, ensures very accurate tab positioning, provides maximum lift force, and is totally self-contained for easy installation.  The actuator assembly is packaged in a non-metallic permanently sealed housing.  No components need to be installed inside the boat. Most importantly, unlike hydraulic trim tabs, there is no oil to leak out.  The actuator incorporates either a standard or low profile transom mounting bracket. *Control switch not included Features: Continuous rolled and pinned hinge provides added strength and eliminates the need for welding Upper ram seal location cannot be damaged due to fouled ram or barnacle growth Utilizes internal pressure equalization system Internal brake system prevents unwanted tab movement when under way or backing down Quiet operation Actuators are fully load tested to push 1000 lbs of force Non-metallic external structure which cannot corrode and will not deteriorate in the sun or under water Technical Specifications: Trim Tab Size (L x W) - 12" x 24" (30 x 61 cm) Boat Length - 28' to 48' (8.5 to 14.5 M) Trim Tab Material - 12 gauge, 304 Stainless Steel  Actuator DC Voltage - 12 V Actuator Stroke Length - 2.25" (57 mm) Actuator Cable Length  - 23' (7 M) Actuator Vertical Height - 11.875" (302 mm) In the Box: Two (2) Stainless Steel tabs Two (2) actuators w/23' (7 M) cables Instruction Manual  *Sold as an Individual This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Actuator Type: Electro-Mechanical Construction: Stainless Steel Box Dimensions: 5"H x 16"W x 21"L WT: 31.3 lbs UPC: 850046155703 Quick Guide (pdf)Owner's Manual (pdf)Brochure (pdf)

Read more less

XKA Stainless Steel Trim Tab - 9 x 18 The Lectrotab stainless steel trim tab design provides unmatched strength and reliability.  All stainless steel tabs are fabricated with a continuous rolled and pinned hinge.  This design eliminates the need for welding. Combined with a precision-engineered actuator, this kit is built to combine quiet operation with a non-hydraulic, maintenance free design.  The unit is corrosion free, ensures very accurate tab positioning, provides maximum lift force, and is totally self-contained for easy installation.  The actuator assembly is packaged in a non-metallic permanently sealed housing.  No components need to be installed inside the boat. Most importantly, unlike hydraulic trim tabs, there is no oil to leak out.  The actuator incorporates either a standard or low profile transom mounting bracket. *Control switch not included Features: Continuous rolled and pinned hinge provides added strength and eliminates the need for welding Upper ram seal location cannot be damaged due to fouled ram or barnacle growth Utilizes internal pressure equalization system Internal brake system prevents unwanted tab movement when under way or backing down Quiet operation Actuators are fully load tested to push 1000 lbs of force Non-metallic external structure which cannot corrode and will not deteriorate in the sun or under water Technical Specifications: Trim Tab Size (L x W) - 9" x 18" (23 x 46 cm) Boat Length - 21' to 30' (6.5 to 9 M) Trim Tab Material - 12 gauge, 304 Stainless Steel  Actuator DC Voltage - 12 V Actuator Stroke Length - 2.25" (57 mm) Actuator Cable Length  - 23' (7 M) Actuator Vertical Height - 11.875" (302 mm) In the Box: Two (2) Stainless Steel tabs Two (2) actuators w/23' (7 M) cables Instruction Manual  *Sold as an Individual This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Actuator Type: Electro-Mechanical Construction: Stainless Steel Box Dimensions: 5"H x 16"W x 25"L WT: 21.9 lbs UPC: 850046155789 Quick Guide (pdf)Owner's Manual (pdf)Brochure (pdf)

Read more less

XKA Stainless Steel Trim Tab - 9 x 12The Lectrotab stainless steel trim tab design provides unmatched strength and reliability.  All stainless steel tabs are fabricated with a continuous rolled and pinned hinge.  This design eliminates the need for welding. Combined with a precision-engineered actuator, this kit is built to combine quiet operation with a non-hydraulic, maintenance free design.  The unit is corrosion free, ensures very accurate tab positioning, provides maximum lift force, and is totally self-contained for easy installation.  The actuator assembly is packaged in a non-metallic permanently sealed housing.  No components need to be installed inside the boat. Most importantly, unlike hydraulic trim tabs, there is no oil to leak out.  The actuator incorporates either a standard or low profile transom mounting bracket. *Control switch not included Features: Continuous rolled and pinned hinge provides added strength and eliminates the need for welding Upper ram seal location cannot be damaged due to fouled ram or barnacle growth Utilizes internal pressure equalization system Internal brake system prevents unwanted tab movement when under way or backing down Quiet operation Actuators are fully load tested to push 1000 lbs of force Non-metallic external structure which cannot corrode and will not deteriorate in the sun or under water Technical Specifications: Trim Tab Size (L x W) - 9" x 12" (23 x 30 cm) Boat Length - 16' to 25' (5 to 7.5 M) Trim Tab Material - 12 gauge, 304 Stainless Steel  Actuator DC Voltage - 12 V Actuator Stroke Length - 2.25" (57 mm) Actuator Cable Length  - 23' (7 M) Actuator Vertical Height - 11.875" (302 mm) In the Box: Two (2) Stainless Steel tabs Two (2) actuators w/23' (7 M) cables Instruction Manual  *Sold as an Individual This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Actuator Type: Electro-Mechanical Construction: Stainless Steel Box Dimensions: 6"H x 15"W x 15"L WT: 17 lbs UPC: 850046155338 Quick Guide (pdf)Owner's Manual (pdf)Brochure (pdf)

Read more less

XKA Stainless Steel Trim Tab - 9 x 9 The Lectrotab stainless steel trim tab design provides unmatched strength and reliability.  All stainless steel tabs are fabricated with a continuous rolled and pinned hinge.  This design eliminates the need for welding. Combined with a precision-engineered actuator, this kit is built to combine quiet operation with a non-hydraulic, maintenance free design.  The unit is corrosion free, ensures very accurate tab positioning, provides maximum lift force, and is totally self-contained for easy installation.  The actuator assembly is packaged in a non-metallic permanently sealed housing.  No components need to be installed inside the boat. Most importantly, unlike hydraulic trim tabs, there is no oil to leak out.  The actuator incorporates either a standard or low profile transom mounting bracket. *Control switch not included Features: Continuous rolled and pinned hinge provides added strength and eliminates the need for welding Upper ram seal location cannot be damaged due to fouled ram or barnacle growth Utilizes internal pressure equalization system Internal brake system prevents unwanted tab movement when under way or backing down Quiet operation Actuators are fully load tested to push 1000 lbs of force Non-metallic external structure which cannot corrode and will not deteriorate in the sun or under water Technical Specifications: Trim Tab Size (L x W) - 9" x 9" (23 x 23 cm) Boat Length - 14' to 19' (4 to 6 M) Trim Tab Material - 12 gauge, 304 Stainless Steel  Actuator DC Voltage - 12 V Actuator Stroke Length - 2.25" (57 mm) Actuator Cable Length  - 23' (7 M) Actuator Vertical Height - 11.875" (302 mm) In the Box: Two (2) Stainless Steel tabs Two (2) actuators w/23' (7 M) cables Instruction Manual  *Sold as an Individual This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Actuator Type: Electro-Mechanical Construction: Stainless Steel Box Dimensions: 6"H x 15"W x 15"L WT: 15.2 lbs UPC: 850046155437 Quick Guide (pdf)Owner's Manual (pdf)Brochure (pdf)

Read more less

XKA Stainless Steel Trim Tab - 12 x 12The Lectrotab stainless steel trim tab design provides unmatched strength and reliability.  All stainless steel tabs are fabricated with a continuous rolled and pinned hinge.  This design eliminates the need for welding. Combined with a precision-engineered actuator, this kit is built to combine quiet operation with a non-hydraulic, maintenance free design.  The unit is corrosion free, ensures very accurate tab positioning, provides maximum lift force, and is totally self-contained for easy installation.  The actuator assembly is packaged in a non-metallic permanently sealed housing.  No components need to be installed inside the boat. Most importantly, unlike hydraulic trim tabs, there is no oil to leak out.  The actuator incorporates either a standard or low profile transom mounting bracket. *Control switch not included Features: Continuous rolled and pinned hinge provides added strength and eliminates the need for welding Upper ram seal location cannot be damaged due to fouled ram or barnacle growth Utilizes internal pressure equalization system Internal brake system prevents unwanted tab movement when under way or backing down Quiet operation Actuators are fully load tested to push 1000 lbs of force Non-metallic external structure which cannot corrode and will not deteriorate in the sun or under water Technical Specifications: Trim Tab Size (L x W) - 12" x 12" (30 x 30 cm) Boat Length - 18' to 32' (5.5 to 9.5 M) Trim Tab Material - 12 gauge, 304 Stainless Steel  Actuator DC Voltage - 12 V Actuator Stroke Length - 2.25" (57 mm) Actuator Cable Length  - 23' (7 M) Actuator Vertical Height - 11.875" (302 mm) In the Box: Two (2) Stainless Steel tabs Two (2) actuators w/23' (7 M) cables Instruction Manual  *Sold as an Individual This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Actuator Type: Electro-Mechanical Construction: Stainless Steel Box Dimensions: 6"H x 15"W x 15"L WT: 19 lbs UPC: 850046155390 Quick Guide (pdf)Owner's Manual (pdf)Brochure (pdf)

Read more less

XKA Stainless Steel Trim Tab - 12 x 18The Lectrotab stainless steel trim tab design provides unmatched strength and reliability.  All stainless steel tabs are fabricated with a continuous rolled and pinned hinge.  This design eliminates the need for welding. Combined with a precision-engineered actuator, this kit is built to combine quiet operation with a non-hydraulic, maintenance free design.  The unit is corrosion free, ensures very accurate tab positioning, provides maximum lift force, and is totally self-contained for easy installation.  The actuator assembly is packaged in a non-metallic permanently sealed housing.  No components need to be installed inside the boat. Most importantly, unlike hydraulic trim tabs, there is no oil to leak out.  The actuator incorporates either a standard or low profile transom mounting bracket. *Control switch not included Features: Continuous rolled and pinned hinge provides added strength and eliminates the need for welding Upper ram seal location cannot be damaged due to fouled ram or barnacle growth Utilizes internal pressure equalization system Internal brake system prevents unwanted tab movement when under way or backing down Quiet operation Actuators are fully load tested to push 1000 lbs of force Non-metallic external structure which cannot corrode and will not deteriorate in the sun or under water Technical Specifications: Trim Tab Size (L x W) - 12" x 18" (30 x 46 cm) Boat Length - 20' to 40' (6 to 12 M) Trim Tab Material - 12 gauge, 304 Stainless Steel  Actuator DC Voltage - 12 V Actuator Stroke Length - 2.25" (57 mm) Actuator Cable Length  - 23' (7 M) Actuator Vertical Height - 11.875" (302 mm) In the Box: Two (2) Stainless Steel tabs Two (2) actuators w/23' (7 M) cables Instruction Manual  *Sold as an Individual This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Actuator Type: Electro-Mechanical Construction: Stainless Steel Box Dimensions: 5"H x 16"W x 25"L WT: 26.8 lbs UPC: 850046155574 Quick Guide (pdf)Owner's Manual (pdf)Brochure (pdf)

Read more less

XKA Stainless Steel Trim Tab - 9 x 24The Lectrotab stainless steel trim tab design provides unmatched strength and reliability.  All stainless steel tabs are fabricated with a continuous rolled and pinned hinge.  This design eliminates the need for welding. Combined with a precision-engineered actuator, this kit is built to combine quiet operation with a non-hydraulic, maintenance free design.  The unit is corrosion free, ensures very accurate tab positioning, provides maximum lift force, and is totally self-contained for easy installation.  The actuator assembly is packaged in a non-metallic permanently sealed housing.  No components need to be installed inside the boat. Most importantly, unlike hydraulic trim tabs, there is no oil to leak out.  The actuator incorporates either a standard or low profile transom mounting bracket. *Control switch not included Features: Continuous rolled and pinned hinge provides added strength and eliminates the need for welding Upper ram seal location cannot be damaged due to fouled ram or barnacle growth Utilizes internal pressure equalization system Internal brake system prevents unwanted tab movement when under way or backing down Quiet operation Actuators are fully load tested to push 1000 lbs of force Non-metallic external structure which cannot corrode and will not deteriorate in the sun or under water Technical Specifications: Trim Tab Size (L x W) - 9" x 24" (23 x 61 cm) Boat Length - 24' to 37' (7 to 11 M) Trim Tab Material - 12 gauge, 304 Stainless Steel  Actuator DC Voltage - 12 V Actuator Stroke Length - 2.25" (57 mm) Actuator Cable Length  - 23' (7 M) Actuator Vertical Height - 11.875" (302 mm) In the Box: Two (2) Stainless Steel tabs Two (2) actuators w/23' (7 M) cables Instruction Manual  *Sold as an Individual This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Actuator Type: Electro-Mechanical Construction: Stainless Steel Box Dimensions: 5"H x 16"W x 25"L WT: 27.2 lbs Quick Guide (pdf)Owner's Manual (pdf)Brochure (pdf)

Read more less

XKA Stainless Steel Trim Tab - 12 x 9 The Lectrotab stainless steel trim tab design provides unmatched strength and reliability.  All stainless steel tabs are fabricated with a continuous rolled and pinned hinge.  This design eliminates the need for welding. Combined with a precision-engineered actuator, this kit is built to combine quiet operation with a non-hydraulic, maintenance free design.  The unit is corrosion free, ensures very accurate tab positioning, provides maximum lift force, and is totally self-contained for easy installation.  The actuator assembly is packaged in a non-metallic permanently sealed housing.  No components need to be installed inside the boat. Most importantly, unlike hydraulic trim tabs, there is no oil to leak out.  The actuator incorporates either a standard or low profile transom mounting bracket. *Control switch not included Features: Continuous rolled and pinned hinge provides added strength and eliminates the need for welding Upper ram seal location cannot be damaged due to fouled ram or barnacle growth Utilizes internal pressure equalization system Internal brake system prevents unwanted tab movement when under way or backing down Quiet operation Actuators are fully load tested to push 1000 lbs of force Non-metallic external structure which cannot corrode and will not deteriorate in the sun or under water Technical Specifications: Trim Tab Size (L x W) - 12" x 9" (30 x 23 cm) Boat Length - 18' to 29' (5.5 to 8.5 M) Trim Tab Material - 12 gauge, 304 Stainless Steel  Actuator DC Voltage - 12 V Actuator Stroke Length - 2.25" (57 mm) Actuator Cable Length  - 23' (7 M) Actuator Vertical Height - 11.875" (302 mm) In the Box: Two (2) Stainless Steel tabs Two (2) actuators w/23' (7 M) cables Instruction Manual  *Sold as an Individual This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Actuator Type: Electro-Mechanical Construction: Stainless Steel Box Dimensions: 6"H x 15"W x 15"L WT: 16.8 lbs UPC: 850046155406 Quick Guide (pdf)Owner's Manual (pdf)Brochure (pdf)

Read more less

Express® Mach4™ - Left Hand - Stainless Steel Propeller - EX-1421-4L - 4-Blade - 14" x 21 PitchThe Prop that put the "four" in Perfourmance! Turning Point's Four Blade revolutionized the propeller market when it was introduced. No one had ever produced a propeller with two different blade shapes (they call it Dual Geometry) for 90-300+hp applications. This prop is uniquely engineered with two blade geometries: (diagram label 2)two blades utilize the Hustler high performance variable rake and aggressive pitch design for incredible hole shot and cornering, and (diagram label 1) two blades utilize an offshore style design for high speed and maximum stern lift.These props re-wrote the rules, proving that you can run a four blade that has unprecedented hole shot, handling, and rough water stability without the top-end speed loss you experience with other manufacturers’ propellers.Now manufactured in our Industry leading TP17 stainless, the Express Mach4 series is perfect for any application that demands enhanced acceleration, cornering, and load carrying capabilities. This prop series is ideally suited for watersports, sterndrive boats, tri-toons, bay boats, and any vessel that can use stern lift. It is our best upgrade of older stainless designs from the 70’s, 80’s, 90’s, and ’00’s, and will outrun most newer props, including five blade ski props.Proprietary Stainless Steel, TP17™Formulated to meet the exacting requirements of the New Express Mach3 and Mach4 designs. 20% higher chromium content than the competition - more shine, better corrosion resistance. Almost 250% Stronger and 5X more durable than run-of-the-mill stainless steel. This new material allows Turning Point's Engineers and Designers the freedom to produce radical new designs that will help you wring the most performance out of your boat.Large Free Flowing Exhaust PortsTurning Point's Propeller Housings have massive Exhaust flow pathways. Their Propellers have 40% more exhaust flow Area versus competitive product. More exhaust flow and less backpressure can generate more horsepower. Like headers for your boat.Turning Point manufactures Express propellers to fit 9.9(bigfoot)-300+hp Evinrude®, Force®, Honda®, Johnson®, Mariner®, Mercruiser®, Mercury®, Nissan®, OMC®, Parsun®, Suzuki®, Tohatsu®, Volvo® Penta®, and Yamaha® Outboards and Sterndrives. Choose one of our Lifetime Warranty MasterGuard Installation Kits to fit your engine, then choose the propeller that matches your boating requirements. There are 3 and 4 blade, left and right rotation prop models with a variety of diameter and pitch options available for almost all boat types. Turning Point's Props Run Faster, Pull Harder, and Handle Better.Note: A Hub Kit is required for installation of this propeller. See the Turning Point Selection Chart or the Prop Wizard™ for hub kit selection.WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Pitch: 21 Material: Stainless Steel Diameter (Inches): 14" Rotation: Left Box Dimensions: 8"H x 16"W x 16"L WT: 16.6 lbs UPC: 652480200908 Quick Guide (pdf)Brochure (pdf)

Read more less

12x9 Sport Tab System with One Box IndicationHydraulic trim tabs are known for power, precision, and durability. Get the most from your boat, no matter what the load, speed, or sea conditions. Using the helm control, you can adjust the tabs individually or in unison to create the perfect cruising attitude. Increase speed and fuel economy, smooth a rough ride, and get on plane faster.Features: Get on plane fast, and stay on plane at intermediate speeds Correct listing and uneven loads Improve visibility and safety Reduce pounding and eliminate porpoising Low maintenance, long-term value, and ease of service Exclusive transom mount interlocking tab design Sport batwing option (M80/ M120) provides 30% more lift for limited-space installations Bottom and piano hinge mounts are available for custom order Kit Includes: (2) Trim plane assemblies (2-4) Hydraulic actuators (A1101A) (1) Hydraulic power unit (V351HPU1) Hydraulic tubing and hardware One box indicator helm control WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

Fiberglass Powder Cleaner - 26ozHeavy duty fiberglass cleaner. Non-scratching formula removes dirt and stubborn stains. Ideal for non-skid surfaces! Removes rust stains, scuffmarks, and black streaks. Washes off with fresh or salt water. Leaves surface ready for waxing.*Note: This product is available for ground shipping only. Specifications: Type: Fiberglass Box Dimensions: 3"H x 3"W x 10"L WT: 2 lbs UPC: 020537011904

Read more less

T-Top Bow Shade 6'L x 90"W - Pacific BlueRecommended for boats 17'-21'A quick and easy way to gain additional shaded area on your center console boat with a T-Top installed. Constructed from Hot Shot marine grade polyester fabric, the top is strong yet lightweight. It is secured to the T-Top and bow rails with adjustable straps and quick release buckles for simple and fast installation. Shade folds down to compact size for ease of storage and is available in 9 colors to best match your boat. Specifications: Type: Covers Box Dimensions: 2"H x 8"W x 10"L WT: 2.1 lbs UPC: 040011474889

Read more less

Speedi Seal Premium-Grade Ceramic Coating - 16oz BottleLet's ramp up the protection to your surfaces! Discover an ultra-glossy finish the quick, easy (and painless) way with Speedi Seal! Flitz Speedi Seal is a premium-grade ceramic coating with nano technology that’s perfect for when you’re in a hurry and need a super-fast super shine. The Speedi Seal is water-based and environmentally friendly leaving no streaks or smears. Give protection lasting up to 6 months!Exceptional Performance on: Fiberglass Clearcoat & paint All auto paints Marine finishes Powdercoat, Emron® Polyurethane Lacquer Plexiglass® Eisenglass Acrylics Plastics Polished aluminum Stainless steel Motor cycles Tool boxes Safe on black plastic  Specifications: Type: Ceramic Coating Box Dimensions: 2"H x 4"W x 10"L WT: 1.2 lbs UPC: 065925328066

Read more less

Trolling Motor Tie-DownJust as we've taken retractable tie-downs to a whole new level,we're making standard rod hold-downs a thing of the past.We've added two great new "PLUS" features to this line of hook and loop hold-down products. SUR-Grip release handle allows for a comfortable,secure hold Rubber Grommets for maximum protection mounting screws countersink into rubber grommets,keeping metal hardware away from equipment.

Read more less

Trolling Motor Saver Set for Deep V BoatsSpecially designed for deep "V" boats with extra long trolling motor shafts.  Designed with two straps,  the longer strap is mounted where the trolling motor shaft fastens to the mounting bracket and can mount 24" above the deck.  The second strap is designed to hold down the actual motor.  It wraps around the entire mounting bracket, and the trolling motor shaft, helping to keep the motor from bouncing when traveling down the lake.  Keep your trolling motor tied down securely and undamaged for longer life. Adjustable 9" to 24".

Read more less

4" Spacer for VC-140 MirrorThe 2″ spacer is machined out of billet aluminum and is white powder-coated to provide years of protection in the harshest of conditions. The spacer is designed to be installed with the VC-140 CC WT Center Console Mirror. *Sold as an Individual 

Read more less

7" Fixed Height Economy PedestalFeatures: 7″ x 7″ Square Base And Seat Mount Rugged, All Steel Construction E-Coat Finish To Resist Corrosion And All Weather Conditions For Use With Standard Boat Seats Rated ABYC Class H-31 B (Fishing Only)  WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

KingPin™ 7" x 7" - Stainless Steel - Square BaseFeatures: 7″ x 7″ Stainless Steel Base, With Nylon Bushing And Satin Finish 3″ Cup Depth Below The Deck Mount Requires A 2-1/2″ Hole In Deck Use With Standard KingPin™ Posts (sold separately) WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Economy Multi-Color Folding Seat - Grey/RedNow A Comfortable Cushioned Seat To Support Your Backside. Durable Upholstery, Folds Easily, Strap With Snap To Keep Seat Secure. Rigid Injection Molded Frame. Heavy-Duty Aluminum Powder Coated Hinges.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Economy Folding Seat - Mossy Oak CamoFeatures: Now A Comfortable Cushioned Seat To Support Your Backside  Durable Upholstery Folds Easily Strap With Snap To Keep Seat Secure. Rigid Injection Molded Frame Heavy-Duty Aluminum Powder Coated Hinges  WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Economy Folding Seat - GreenFeatures: Now A Comfortable Cushioned Seat To Support Your Backside  Durable Upholstery Folds Easily Strap With Snap To Keep Seat Secure. Rigid Injection Molded Frame Heavy-Duty Aluminum Powder Coated Hinges  WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

XXL Folding Seat - Mossy Oak Duck BlindDesigned for the plus size body frames. Marine grade vinyl with plush rebounding foam padding. Heavy-duty powder coated hinges. Optional armrest can be added (sold separately).WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

High Back Multi-Color Folding Seat - Grey/CharcoalNow A Comfortable Cushioned Seat To Support Your Backside. Durable Upholstery, Folds Easily, Strap With Snap To Keep Seat Secure. Rigid Injection Molded Frame. Heavy-Duty Aluminum Powder Coated Hinges.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Euro Black 4" Speedometer (30 Knot) (Pitot)Perimeter-lighted Black dial with bold White graphics, Black aluminum bezel, contoured White pointer and flat glass lens.Pitot tube type speedometers operate by pressure from the water being forced into the pitot tube. This pressure is then transmitted through flexible tubing to the bourdon tube movement inside the speedometer head where it is converted into a speed reading by the movement mechanism.∗Pitot tube sold separately.4" Gauge - Hole size: 3.4" (86.36 mm)Features: Anti-scratch glass lens Plastic Cases for corrosion resistance and long life Perimeter-lighted Black dial Can be adapted for 24 VDC systems Dual Scale - Imperial and Metric Factory P/N SE9659*Sold as an Individual**Gauge Cover not IncludedThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Voltage - Input Range (Volts): 12/24 V Series: Euro Black Gauge Type: Speedometer Gauge Size: 4" Box Set: No Box Dimensions: 4"H x 4"W x 4"L WT: 1.1 lbs UPC: 759266328099

Read more less

ShadeFin Adjustable Clamp-On Pipe MountFor boats with limited or no rod holders, the Adjustable Clamp-On Pipe Mount is a great solution for secure placement of ShadeFin. This mount fits 3/4" or 1" schedule-40 pipe or 1-1/4" O.D. tube. Once this mount is secured to your desired location, easily adjust the angle of ShadeFin using the soft-touch knob for hours of sun protection while on the water.Features: Manufactured from Type-316L stainless steel Features soft-touch knob for easy and secure angle adjustment Adjusts every 15º with safety detents Attaches to 3/4" or 1" pipe or 1-1/4" tube Includes self-aligning notch and pin-locking hole 1-year limited warranty This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Brochure (pdf)

Read more less

Food Grade Synthetic Oil - 1qt Trigger SprayerMany industrial facilities do not allow the use of aerosol products. Due to these environmental concerns, we have developed an alternative option with our Super Lube® Multi-Use Synthetic Oil Non-Aerosol Spray. It is ozone friendly and does not contain CFCs (Chlorofluorocarbons). Super Lube® Multi-Use Synthetic Oil is a premium, synthetic oil with suspended Syncolon® particles that bond to surfaces of moving parts providing protection against friction, wear, rust and corrosion. It is ideally suited for industrial machinery and equipment. Machinery lasts longer, downtime is reduced, and productivity is increased. It is an ISO Grade 150 oil and has a temperature range of -45°F to 450°F (-43°C to 232°C).Features: Super Lube® Multi-Use Synthetic Oil is dielectric, food grade, clean and environmentally friendly. It is safe on metal, wood, leather, fabric, painted surfaces, most plastics and rubbers.  Super Lube® Multi-Use Synthetic Oil is an NSF registered Food Grade lubricant, rated H1 for incidental food contact and meets former USDA (H1) guidelines. Super Lube® Multi-Use Synthetic Oil is Kosher Certified.

Read more less

Siren 3 Pro Vessel Management Device Features: Providing the ultimate smart boating experience that keeps you connected to your boat 24/7, regardless of boat size, type or use The Siren 3 Pro provides the modern boating experience by going beyond basic marine GPS, radar & radio solutions to complement your multi-function display (MFD) with Connected Boat® Technology Together with our easy-to-use App plus global cellular & optional satellite connectivity, our smart boat device connects you to your boat anytime, anywhere Make your life easier by controlling your boat's lights, A/C & digital switching systems remotely from the palm of your hand The Siren 3 Pro provides a better boating experience with remote monitoring, helping your boat stay safe, secure & ready to enjoy Standard Features: Battery Monitoring (Can monitor up to 2 battery banks, if additional banks are required the Siren Marine Battery Sensor will need to be added.) GPS Position/Geofence NMEA 2000 Digital Switching 4G LTE Features with Add-On Sensors & Accessories: Engine Metrics Connected Fluid Tanks Security/Entry Bilge High Water Shore Power Temperature Satellite Compatible Wireless Sensors 3.0 Quick Guide (pdf)Owner's Manual (pdf)Brochure (pdf)

Read more less

Metal Protectant - 1qt Trigger SprayerSuper Lube® Metal Protectant and Corrosion Inhibitor provides long-term protection against rust and corrosion on any metal surface. It is non-drying, will not harden or crack and is ideal for preventative maintenance in high humidity environments.Super Lube® Metal Protectant and Corrosion Inhibitor is an NSF registered Food Grade lubricant, rated H1 for incidental food contact and meets former USDA (H1) guidelines.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Type: Grease Box Dimensions: 2"H x 4"W x 10"L WT: 1.9 lbs UPC: 082353830329

Read more less

Engine Assembly Grease - 8oz Brush BottleSuper Lube® Engine Assembly Grease is a soft White NLGI 0 grease. Super Lube® Engine Assembly Grease is waterproof and is an excellent lubricant for anti-seize and engine assembly applications.Super Lube® Engine Assembly Grease can be used on all types of metal for coating moving parts and engine rebuilding applications.Super Lube® Engine Assembly Grease provides a lubricant film to the engine that prevents scoring and reduces heat until the motor oil located in the crankcase has sufficient time to lubricate the engine. Specifications: Type: Grease Box Dimensions: 2"H x 3"W x 5"L WT: 0.6 lbs UPC: 082353190089

Read more less

Multi-Purpose Synthetic Grease with Syncolon® - 14.1oz CartridgeSuper Lube® Grease is a patented synthetic NLGI Grade 2, heavy-duty, multi-purpose lubricant with Syncolon®. Synthetic base fluids and the addition of Syncolon® micro powders combine to form a premium lubricant that provides longer life protection against friction, wear, rust and corrosion over a temperature range of -45°F to 450°F (-43°C to 232°C). Machinery lasts longer, downtime is reduced and productivity is increased.Super Lube® Multi-Purpose Synthetic Grease is dielectric, food grade, clean and environmentally friendly. It offers good mechanical stability, does not evaporate or form gummy deposits. It will not melt or separate.Features: Super Lube® Multi-Purpose Synthetic Grease is an NSF registered Food Grade lubricant, rated H1 for incidental food contact and meets former USDA (H1) guidelines. Super Lube® Multi-Purpose Synthetic Grease is Kosher Certified. NGLI Grade 2 Grease is NLGI GC-LB Certified. Available in NLGI Grades: 1, 0, 00, 000. Part numbers are identified by /1, /0, /00, /000. Available with UV additive for traceability – validates the existence of the lubricant. Part numbers are identified by /UV. Specifications: Type: Grease Box Dimensions: 2"H x 2"W x 9"L WT: 1 lbs UPC: 082353411504

Read more less

Skipper Standard Seat Fold Down - Grey/RedFeatures: Injection Molded Seats With Interlocking hinge For Greater Structural Support Extra Wide Seat, Premium High Quality Upholstery For All Day Comfort, With Synthetic Boat Fabric Weather Resistant, Mildew Resistant, Optimal UV Protection WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Economy Multi-Color Folding Seat - Grey/BlueFeatures: A Comfortable Cushioned Seat To Support Your Backside Durable Upholstery, Folds Easily, Strap With Snap To Keep Seat Secure Rigid Injection Molded Frame Heavy-Duty Aluminum Powder Coated Hinges WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Economy Multi-Color Folding Seat - Grey/CharcoalFeatures: A Comfortable Cushioned Seat To Support Your Backside Durable Upholstery, Folds Easily, Strap With Snap To Keep Seat Secure Rigid Injection Molded Frame Heavy-Duty Aluminum Powder Coated Hinges WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Adjustable Motor SupportThe adjustable motor support has a universal design and comes with both the bolt on bracket and the over the roller bracket. It is adjustable from 34 in. to 46 in. and comes with 2 rubber straps a 20 in. motor strap (including hooks) and a 5 in. trailer strap. Owner's Manual (pdf)

Read more less

14" Atlas Series Hot Shot™ Jack Plate Hole Shot Plate - VeradoREVOLUTIONARY. SIMPLE. UNIQUE. EXCITING. These are but a few of the comments coming from users of T-H Marine's HOT SHOT™ hole shot plates. This simple-but-revolutionary plate easily attaches to the bottom of our jack plate to provide an amazing 18 to 20 percent better hole shot. That is 2 to 3 seconds faster out of the hole. Hot Shot™ does this by dramatically reducing water drag on take off as well as serving as a center trim tab. An added advantage is the ability to stay on plane and virtually eliminating porpoising at lower speeds.Features: Models available for our ATLAS™ hydraulic jack plates and Z-LOCK™ manual plates.   Models Marked "T" Have side imaging Transducer Cut-Out. Slot fits most Model SI Transducers.  Models to Fit All ATLAS™ Jack Plates (both standard and heavy duty jack plates) Provides Improved Hole Shot Reduces Water Drag at Take Off Reduces Porpoising

Read more less

Rail Base Fitting Rectangular Base 30° 316 Stainless Steel - 1-7/8" x 32-3/16" - 1" ODThese Rectangular Rail Base Fittings include set screws where appropriate. Set screws can be purchased separately (299999-1). Requires 1/8" Allen wrench to install. Constructed of corrosion resistant investment cast 316 stainless steel. Installs with four FH fasteners (not included). *Stainless tubing with a wall thickness of 0.049”. Features: Investment Cast 316 Stainless Steel  30° Rectangular Base 1" Tube OD Base: 1-7/8" x 3-3/16" Fastener: 1/4" FH WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Sealing Kit for Water Capacitive SensorSealing Kit for Fresh Water Level Sensor.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

32-Pin Power Cable Single Engine Set-Up - .5M32-pin power cable for single engine.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

Bus Cable - 10M for AcquaLink® GaugesVDO Marine Bus Cable - 10M.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less