The Vision Series Mounting System is a revolutionary design that provides the simplest, most attractive solutions to your electronics mounting requirements.  Dual Mount for a Radar Dome and a Satellite Dome. Two Mounting Plates required. Features: All-new sleek, modern design First all modular system - extremely versatile Simple selection and installation Easy to add accessories Two marine electronics mounting platforms Powder coated aluminum Requires Vision Mounting Plate to install radar or sat dome antenna18" Sat Dome Dual Mount Aft raked 30 degrees 18" tall Specifications: Construction: Powder Coated Aluminum Type: Dual Mount Box Dimensions: 11"H x 19"W x 31"L WT: 16.8 lbs UPC: 796744682007 Quick Guide (pdf)

Read more less

SUP & Board RackEdson's SUP & Board Rack is designed to safely, securely, and conveniently cradle your board out of the way of sails, sheets, anchors, feet, and anything else on deck. Built with Edson's famous commitment to lifetime products, high-quality 316 stainless is used throughout and complements any boat's aesthetics.The ComfortGrip padding grips and pads the board, keeping your board's deck pad and finish in top condition while securely holding the board in place.Mounts to any railing from 1" to 1-1/4" diameter. The unique mounting system allows installation on rails of varying vertical/horizontal orientations, folds flat out of the way when not in use, and is easily removed and stowed for security.

Read more less

Vision Series Mount - 6" Aft Angled - Heavy Duty for Open Array RadarsThe Vision Series Mounting System is a revolutionary design that provides the simplest, most attractive solution to your electronics mounting requirements.Features: All-new sleek, modern design First all modular system - extremely versatile Simple selection and installation Easy to add accessories Powder coated aluminum Requires Vision Mounting Plate to install radar or sat dome antenna 6" Heavy Duty Aft Mount 6" Tall Aft raked 30 degrees Specifications: Type: Aft Leaning Mount Box Dimensions: 8"H x 13"W x 15"L WT: 7.8 lbs UPC: 796744681109

Read more less

Light Arm for Radar Domes and Sat DomesEdson's 68650 Vision Series Light Arm allows you to attach your Navigation Light to your Edson Vision Series Mount with a Radar Dome and Satellite Dome. Light Arm extends 14" toward the stern allowing room for your Radar or Satellite Dome. The Light Arm is 28" tall, which meets Coast Guard standards for navigation lights.Edson's Light Arm requires a Light Arm Receiver that is dependent on the style of Vision Series Mount you have (Aft Angled or Vertical). Specifications:Mounting Plates and Light Arm Receiver are required to complete an Edson Vision Series Mounting System. (sold separately)Base mounts sold separately Specifications: Type: Light/GPS Brackets Box Dimensions: 1"H x 16"W x 42"L WT: 3.1 lbs UPC: 796744686500 Quick Guide (pdf)

Read more less

Attwood LED 12V Combination Anchor/Streaming LightEdson offers the 67510 Attwood LED Anchor/Steaming Light (72" Wire Length) that is specifically designed for Edson's Vision Series Light Arms. With 3NM of 360° visibility while drawing a fraction of the power of traditional incandescent lights, Attwood's 3NM LED Masthead/Anchor light is one of the first of its kind. Constructed of corrosion resistant composites with stainless steel accents, this product was designed for the harsh coastal marine environment. For use on boats up to 65.6 ft. (20 meters)The 67510 Attwood LED Anchor/Steaming Light requires an Edson Light Arm that is secured to a Vision Series Base Mount with a Light Arm Receiver and Radar Mounting Plate. Order Edson's Light Arm, Light Arm Receiver,  Base Mount and Mounting Plate separately. Specifications: Type: Light/GPS Brackets Box Dimensions: 3"H x 3"W x 4"L WT: 0.4 lbs UPC: 796744675108

Read more less

Edson 5" Stainless Antenna Standoff - Antennas Up To 1.5" DiameterThese strong and attractive standoffs will limit the amount of wear and tear on your antennas while powering through rough seas. Made from investment cast 316 stainless, they will never break like plastic. Fitting all antennas up to 1.5" in diameter, they are available in three sizes, virtually eliminating the need to shim the standoff or antenna base. The clasp is held closed with a quick release pin allowing for quick antenna takedown to go under bridges or for trailering. Each clasp is padded providing a secure, rattle free closure. The combination of a highly polished and vapor blast gray finish enhance the sleek, attractive styling. Specifications: Type: Mounting Brackets Box Dimensions: 1"H x 6"W x 9"L WT: 1.6 lbs UPC: 796744001273

Read more less

Light Arm for Open Array RadarsEdson's 68660 Vision Series Light Arm allows you to attach your Navigation Light to your Edson Vision Series Mount with a Open Array Radar. Light Arm extends 28" toward the stern allowing room for your Radar or Satellite Dome. The Light Arm is 28" tall, which meets Coast Guard standards for navigation lights.Edson's Light Arm requires a Light Arm Receiver that is dependent on the style of Vision Series Mount you have (Aft Angled or Vertical). Specifications:Mounting Plates and Light Arm Receiver are required to complete an Edson Vision Series Mounting System. (sold separately)Base mounts sold separately Specifications: Type: Light/GPS Brackets Box Dimensions: 3"H x 32"W x 33"L WT: 5.2 lbs UPC: 796744686609 Quick Guide (pdf)

Read more less

7" Stainless Clamp-On Accessory Mount Edson's 7" Stainless Clamp On Accessory Mount allows you to mount drink holders, instruments or nearly anything else that requires a secure location on the pedestal guard.  For angled guards, they rotate and lock in place with set screws so you can mount your drink holder level or adjust the angle of your instrument. Highly polished solid 316 Stainless construction with adapter sleeves for 1", 1-1/8" and 1-1/4" guard pipes.

Read more less

3" Stainless Clamp-On Accessory MountEdson's 3" Stainless Clamp On Accessory Mount allows you to mount drink holders, instruments or nearly anything else that requires a secure location on the pedestal guard.  For angled guards, they rotate and lock in place with set screws so you can mount your drink holder level or adjust the angle of your instrument. Highly polished solid 316 Stainless construction with adapter sleeves for 1", 1-1/8" and1-1/4" guard pipes.

Read more less

Starlink High-Performance Flat Dish Mounting PlateEdson's Starlink mounting plate allows you to mount a High-Performance Flat Dish to our Vision Series mounts. Choose the Starlink plate as "Step 2" in our 3-step Vision Series system and you're on your way.Powder-coated white matches the Vision Series line, including mounting hardware and Tef-Gel thread protectant.*For High-Performance Flat Dish mounting only. **For Dish pole mounting, please see Edson part # 68881

Read more less

Vision Series Mounting Plate f/Raymarine Quantum, 2kW & 4kW Radar DomesWith Edson's Vision Series Mounting System, you can select your desired Mounting Plate to best fit your electronics. Edson's 68551 Vision Series Mounting Plate is designed for Raymarine Radar Domes (Quantum, Quantum 2, RD418D, RD424D, RD418HD, RD424HD). Mounting Plates are required to complete an Edson Vision Series Mounting System. Base mount sold separately.  Specifications: Type: Adapters Box Dimensions: 1"H x 16"W x 16"L WT: 1 lbs UPC: 796744685510

Read more less

Garmin Mounting Plate for 18" & 24" HD, xHD, HD+ 4kW Radar domesWith Edson's Vision Series Mounting System, you can select your desired Mounting Plate to best fit your electronics. Edson's 68520 Vision Series Mounting Plate is designed for Garmin 18 and 24 Radar Domes (GMR Fantom 18, GMR Fantom 24, GMR 18 HD+, GMR 18 xHD, & GRM 24 xHD). Specifications:Mounting Plates are required to complete an Edson Vision Series Mounting System. Base mounts sold separately Specifications: Type: Adapters Box Dimensions: 1"H x 16"W x 16"L WT: 2.6 lbs UPC: 796744685206 Quick Guide (pdf)

Read more less

Molded Compass Cylinder - WhiteEdson’s Compass Cylinders are distinctive, non-reflecting, and virtually indestructible. Great for new boats or upgrading your existing pedestal to a larger, easier to read compass. Fits Edson’s 335 and 336 pedestals, stands 5-1⁄2” high and accommodates flush mounted compasses up to a 6-7⁄8” flange diameter.

Read more less

Horizontal Rail Accessory Mount - 3" DiskEdson’s Stainless Horizontal Rail Accessory Mount puts your hand-held GPS securely and conveniently within reach on your Steering Pedestal Guard. With its 3" Disk Platform you can mount your GPS hand held or other items that need a secured place to stay.Designed to attach to all 1”, 1-1/8” and 1-1/4” pedestal guard tubes by clamping the two pieces together around the guard tube without the need for removal of the tubes or any existing wiring.

Read more less

Pipe to Fold-Down Adapter 3-1/2" MastEdson's Fold-Down Adapter 3-1/2" Radar Masts attaches to the bottom of your radar mast allowing it to fold down. Fold-Down Towers are perfect for trailer boats, low bridge clearance and end of the season storage. By using a992-35 Pivot Bracket (sold separately) and Fold-Down Adapter with your Standard Radar Mast, you can also mount your radar on a raked transom or coaming side.  Use 989-1 Right Angle Base (sold separately) if mounting to a vertical surface and folding tower fore and aft.

Read more less

Furuno & Sitex Mounting PlateWith Edson's Vision Series Mounting System, you can select your desired Mounting Plate to best fit your electronics. Edson's 68510 Vision Series Mounting Plate is designed for both SiTex 2kw, 4kw Radar Domes (T-2041, MDS-9, MDS-8, MDS-1, T-941, T-921, T-761, T-760) and  Furuno 2kw, 4kw Radars (15", 18”, 19” and 24" Domes and 3.5’ & 4' Open Arrays). Specifications:Mounting Plates are required to complete an Edson Vision Series Mounting System. Base mounts sold separately Specifications: Type: Adapters Box Dimensions: 1"H x 16"W x 16"L WT: 2.5 lbs UPC: 000007967443 Quick Guide (pdf)

Read more less

Light Arm Receiver for Aft Angled MountsThe Light Arm Receiver secures a Light Arm to the mounting plate on Edson Vision Series Aft Angle Mounts. Edson's Light Arm Receivers require an Edson Mounting Plate and an Edson Vision Series Mount.Specifications:Mounting Plates are required to complete an Edson Vision Series Mounting System. Base mounts sold separately Specifications: Type: Light/GPS Brackets Box Dimensions: 3"H x 6"W x 9"L WT: 0.3 lbs UPC: 796744686302

Read more less

Intellian/KVH/Cobham Mounting PlateWith Edson's Vision Series Mounting System, you can select your desired Mounting Plate to best fit your electronics. Edson's 68720 Vision Series Mounting Plate is designed for Intellian FB150 & FB250, KVH TracPhone Fleet One FB150 & FB250, and Cobham Sailor FB150 & FB250.Specifications:Mounting Plates are required to complete an Edson Vision Series Mounting System. Base mounts sold separately Specifications: Type: Adapters Box Dimensions: 1"H x 16"W x 16"L WT: 2.95 lbs UPC: 796744687200 Quick Guide (pdf)

Read more less