SmartSolar MPPT Charge Controller - 100V - 15AMPFeatures: Bluetooth Smart built-in The wireless solution to set-up, monitor, update and synchronise SmartSolar Charge Controllers.  VE.Direct For a wired data connection to a Color Control GX, other GX products, PC or other devices  Ultra-fast Maximum Power Point Tracking (MPPT) Especially in case of a clouded sky, when light intensity is changing continuously, an ultra-fast MPPT controller will improve energy harvest by up to 30% compared to PWM charge controllers and by up to 10% compared to slower MPPT controllers.  Load output Over-discharge of the battery can be prevented by connecting all loads to the load output. The load output will disconnect the load when the battery has been discharged to a pre-set voltage (48V model: interface with a relay). Alternatively, an intelligent battery management algorithm can be chosen: see Battery Life. The load output is short circuit proof.  Battery Life: intelligent battery management When a solar charge controller is not able to recharge the battery to its full capacity within one day, the result is often that the battery will continually be cycled between a ‘partially charged’ state and the ‘end of discharge’ state. This mode of operation (no regular full recharge) will destroy a lead-acid battery within weeks or months. The Battery Life algorithm will monitor the state of charge of the battery and, if needed, day by day slightly increase the load disconnect level (i.e. disconnect the load earlier) until the harvested solar energy is sufficient to recharge the battery to nearly the full 100%. From that point onwards, the load disconnect level will be modulated so that a nearly 100% recharge is achieved about once every week.  Programmable battery charge algorithm See the software section on our website for details  Day/night timing and light dimming option See the software section on our website for details  Internal temperature sensor Compensates absorption and float charge voltage for temperature.  Optional external battery voltage and temperature sensing via Bluetooth A Smart Battery Sense or a BMV-712 Smart Battery Monitor can be used to communicate battery voltage and temperature to one or more SmartSolar Charge Controllers Warranty InfoWARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.Please contact your dealer for any returns, repairs or support issues related to this product. Specifications: Charger Input - Voltage: 18-100v Charger Output - Amps: 15a Charger Output Voltage: 12v/24v Charging Banks: 1 Portable: No Box Dimensions: 3"H x 6"W x 6"L WT: 1.2 lbs UPC: 8719076040811 Quick Guide (pdf)Brochure (pdf)

Read more less

6V/12V, 3A Selectable Battery ChargerThe Battery Tender® 3 AMP battery charger will fully recharge and then maintain a battery at its proper storage voltage without the damaging effects caused by trickle chargers. At double the output (3 AMPs) than the original Battery Tender® Plus for a quicker recharge on automotive, marine, and power sport batteries. An ideal charger for everyday charging use or long-term storage and maintenance, it is compatible with 6-volt and 12-volt AGM, flooded, and gel batteries.Features: Reverse Polarity Protection and Spark Proof to ensure user safety Complete a 4-step charging program (Initialization, Bulk Charge, Absorption Mode, and floating mode) Perfect for all lead-acid, flooded, or sealed maintenance-free batteries (AGM and gel cells) Includes: 3 AMP battery charger and maintainer, ring terminal and alligator clip cables, 5-year limited and lifetime warranty Specifications: Input: 120VAC @ 60 Hz Output: 6V or 12V @ 3 AMPs Safety Timer: 33 hours Agency Approvals: UL / CSA / RoHS / BC / FCC Specifications: Charger Input - Voltage: 120v Charger Output - Amps: 3a Charger Output Voltage: 6v/12v Charging Banks: 1 Portable: Yes Box Dimensions: 4"H x 10"W x 12"L WT: 2.35 lbs UPC: 734357220209 Owner's Manual (pdf)

Read more less

SmartShunt 300AThe SmartShunt is an all-in-one battery monitor, only without a display. Your phone acts as a display. The SmartShunt connects via Bluetooth to the VictronConnect app on your phone (or tablet). You can conveniently read out all monitored battery parameters, like state of charge, time to go, historical information, and much more.Alternatively, the SmartShunt can be connected and read by a GX device. Connection to the SmartShunt is made via a VE.Direct cable.The SmartShunt is a good alternative for a BMV battery monitor, especially for systems where battery monitoring is needed but less wiring and clutter are wanted. The SmartShunt is equipped with Bluetooth, a VE.Direct port and a connection that can be used for: monitoring a second battery, midpoint monitoring or a temperature sensor.Please contact your dealer for any returns, repairs or support issues related to this product. Specifications: Portable: Yes Box Dimensions: 3"H x 4"W x 7"L WT: 0.8 lbs UPC: 8719076065708 Owner's Manual (pdf)Brochure (pdf)

Read more less

SmartSolar MPPT Charge Controller - 75V - 15AMPFeatures: Bluetooth Smart built-in The wireless solution to set-up, monitor, update and synchronise SmartSolar Charge Controllers.  VE.Direct For a wired data connection to a Color Control GX, other GX products, PC or other devices  Ultra-fast Maximum Power Point Tracking (MPPT) Especially in case of a clouded sky, when light intensity is changing continuously, an ultra-fast MPPT controller will improve energy harvest by up to 30% compared to PWM charge controllers and by up to 10% compared to slower MPPT controllers.  Load output Over-discharge of the battery can be prevented by connecting all loads to the load output. The load output will disconnect the load when the battery has been discharged to a pre-set voltage (48V model: interface with a relay). Alternatively, an intelligent battery management algorithm can be chosen: see Battery Life. The load output is short circuit proof.  Battery Life: intelligent battery management When a solar charge controller is not able to recharge the battery to its full capacity within one day, the result is often that the battery will continually be cycled between a ‘partially charged’ state and the ‘end of discharge’ state. This mode of operation (no regular full recharge) will destroy a lead-acid battery within weeks or months. The Battery Life algorithm will monitor the state of charge of the battery and, if needed, day by day slightly increase the load disconnect level (i.e. disconnect the load earlier) until the harvested solar energy is sufficient to recharge the battery to nearly the full 100%. From that point onwards, the load disconnect level will be modulated so that a nearly 100% recharge is achieved about once every week.  Programmable battery charge algorithm See the software section on our website for details  Day/night timing and light dimming option See the software section on our website for details  Internal temperature sensor Compensates absorption and float charge voltage for temperature.  Optional external battery voltage and temperature sensing via Bluetooth A Smart Battery Sense or a BMV-712 Smart Battery Monitor can be used to communicate battery voltage and temperature to one or more SmartSolar Charge Controllers Warranty InfoWARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.Please contact your dealer for any returns, repairs or support issues related to this product. Specifications: Charger Input - Voltage: 18-75v Charger Output - Amps: 15a Charger Output Voltage: 12v/24v Charging Banks: 1 Portable: No Box Dimensions: 2"H x 6"W x 6"L WT: 1.35 lbs UPC: 8719076040804 Quick Guide (pdf)Brochure (pdf)

Read more less

6V/12V, 1.25A Selectable Battery ChargerWhy Choose the Battery Tender® Plus over the Battery Tender® Junior? The Plus 1.25 Amp delivers 50% more power than a Battery Tender® Junior, which means a much quicker charge. Vehicles on the roads today come standard with more electronics, meaning a heavy voltage is drawn from your battery even when your vehicle is turned off. The Plus is strong enough to offset the drain, keeping your battery at peak performance! This charger gives you the option to select between a 12-volt and a 6-volt charging option. With a lightweight body design, this charger operates using less electricity than the original Battery Tender®, taking us one step closer to a green environment. All Battery Tender® battery chargers automatically switch from a full charge to a float maintenance charge mode, keeping your battery at optimal charge levels and ready to go when you are. Ideal for ATVS, Boats, Motorcycles, Lawn Mowers, jet skis, and automobiles.Features: Reverse Polarity Protection to ensure user safety Complete a 4-step charging program (Initialization, Bulk Charge, Absorption Mode, Float Mode) Perfect for all lead-acid, flooded, or sealed maintenance-free batteries (AGM and gel cell) Listed in California Appliance Efficiency Database Includes:5-year warrantySpecifications: Input: 120VAC Output: Switchable from 6 Volts or 12 Volts DC @ 1.25 amps Safety Timer: 72 hours Agency Approvals: UL / CSA / BC / FCC Specifications: Charger Input - Voltage: 120v Charger Output - Amps: 1.25a Charger Output Voltage: 6v/12v Charging Banks: 1 Portable: Yes Box Dimensions: 4"H x 10"W x 12"L WT: 2.15 lbs UPC: 734357221107 Owner's Manual (pdf)

Read more less

SmartSolar MPPT Charge Controller - 75V - 10AMPFeatures: Bluetooth Smart built-in The wireless solution to set-up, monitor, update and synchronise SmartSolar Charge Controllers.  VE.Direct For a wired data connection to a Color Control GX, other GX products, PC or other devices  Ultra-fast Maximum Power Point Tracking (MPPT) Especially in case of a clouded sky, when light intensity is changing continuously, an ultra-fast MPPT controller will improve energy harvest by up to 30% compared to PWM charge controllers and by up to 10% compared to slower MPPT controllers.  Load output Over-discharge of the battery can be prevented by connecting all loads to the load output. The load output will disconnect the load when the battery has been discharged to a pre-set voltage (48V model: interface with a relay). Alternatively, an intelligent battery management algorithm can be chosen: see Battery Life. The load output is short circuit proof.  Battery Life: intelligent battery management When a solar charge controller is not able to recharge the battery to its full capacity within one day, the result is often that the battery will continually be cycled between a ‘partially charged’ state and the ‘end of discharge’ state. This mode of operation (no regular full recharge) will destroy a lead-acid battery within weeks or months. The Battery Life algorithm will monitor the state of charge of the battery and, if needed, day by day slightly increase the load disconnect level (i.e. disconnect the load earlier) until the harvested solar energy is sufficient to recharge the battery to nearly the full 100%. From that point onwards, the load disconnect level will be modulated so that a nearly 100% recharge is achieved about once every week.  Programmable battery charge algorithm See the software section on our website for details  Day/night timing and light dimming option See the software section on our website for details  Internal temperature sensor Compensates absorption and float charge voltage for temperature.  Optional external battery voltage and temperature sensing via Bluetooth A Smart Battery Sense or a BMV-712 Smart Battery Monitor can be used to communicate battery voltage and temperature to one or more SmartSolar Charge Controllers Warranty InfoWARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.Please contact your dealer for any returns, repairs or support issues related to this product. Specifications: Charger Input - Voltage: 18-75v Charger Output - Amps: 10a Charger Output Voltage: 12v/24v Charging Banks: 1 Portable: No Box Dimensions: 2"H x 6"W x 6"L WT: 0.85 lbs UPC: 8719076040798 Quick Guide (pdf)Brochure (pdf)

Read more less

BlueSolar MPPT Charge Controller - 100V - 15AMPFeatures: Ultra-fast Maximum Power Point Tracking (MPPT) Especially in case of a clouded sky, when light intensity is changing continuously, an ultra-fast MPPT controller will improve energy harvest by up to 30% compared to PWM charge controllers and by up to 10% compared to slower MPPT controllers.  Load output Over-discharge of the battery can be prevented by connecting all loads to the load output. The load output will disconnect the load when the battery has been discharged to a pre-set voltage. Alternatively, an intelligent battery management algorithm can be chosen: see Battery Life. The load output is short circuit proof. Some loads (especially inverters) can best be connected directly to the battery, and the inverter remote control connected to the load output. A special interface cable may be needed, please see the manual.  Battery Life: intelligent battery management When a solar charge controller is not able to recharge the battery to its full capacity within one day, the result is often that the battery will continually be cycled between a ‘partially charged’ state and the ‘end of discharge’ state. This mode of operation (no regular full recharge) will destroy a lead-acid battery within weeks or months. The Battery Life algorithm will monitor the state of charge of the battery and, if needed, day by day slightly increase the load disconnect level (i.e. disconnect the load earlier) until the harvested solar energy is sufficient to recharge the battery to nearly the full 100%. From that point onwards the load disconnect level will be modulated so that a nearly 100% recharge is achieved about once every week.  Programmable battery charge algorithm See the software section on our website for details  Day/night timing and light dimming option See the software section on our website for details  Programming, real-time data and history display options - Color Control GX or other GX devices: see the Venus documents on our website. - A smartphone or other Bluetooth-enabled device: VE.Direct Bluetooth Smart dongle needed Warranty InfoWARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.Please contact your dealer for any returns, repairs or support issues related to this product. Specifications: Charger Input - Voltage: 18-75v Charger Output - Amps: 15a Charger Output Voltage: 12v/24v Charging Banks: 1 Portable: No Box Dimensions: 3"H x 6"W x 6"L WT: 1.2 lbs UPC: 8719076025337 Quick Guide (pdf)Brochure (pdf)

Read more less

Battery ChargerAttwood's Battery Charger is compact and perfect for your bench, garage or shop use. Overcharge, short circuit and reverse polarity protection provides years of worry free use. Provides 2 and 6 amp charge for 12V batteries. 6 amp charge for 6V batteries. Automatically switches to trickle charge mode after battery is fully charged. Dual rated 12 and 6 volt battery charger can be used for all of your marine, automotive, RV and sports applications. LED indicator - power on Ammeter indicates charging current 6 foot power cord length 48 inch battery connector leads WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Charger Output - Amps: 2/6a Charging Banks: 1 Portable: Yes Charger Input - Voltage: 120v Charger Output Voltage: 12v Box Dimensions: 6"H x 9"W x 9"L WT: 6.95 lbs UPC: 022697119018

Read more less

Battery Alarm GXThe Battery Alarm is a small and low-cost alarm panel that monitors your battery bank. It features both audible and visual alarms, as well as a potential free contact with normally open and normally closed contacts. Alarm thresholds and hysteresis are programmable by DIP switches.Warranty InfoWARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.Please contact your dealer for any returns, repairs or support issues related to this product. Quick Guide (pdf)

Read more less

12V, 800mA Weather-Resistant Battery ChargerThe rugged Battery Tender® 12V, 800mA weather-resistant battery charger, and maintainer have all the features of our best-selling Battery Tender® Junior in a mountable, water-resistant package. This 800-milliamp battery charger is also shock and vibration resistant, making it perfect for all types of ATVs, personal watercraft, motorcycles, boats, or other recreational vehicles that may be exposed to the elements. Smaller than a computer mouse, but tough enough to keep your ride ready for its next adventure. The Battery Tender® 12V, 800mA weather-resistant battery charger is designed for all lead-acid and flooded or sealed maintenance-free batteries (AGM and gel cells).Includes: 12V, 800mA weather-resistant battery charger, and maintainer Alligator clip connector Ring terminal harness connector 3-year warranty and lifetime customer support Specifications: Input: 120VAC @ 60 Hz Output: 12 VDC @ 800 mA Unit Dimensions (L X W X H) (inch): 4.35" x 2.75" x 1.5" Unit Weight: 1 lb. (charger only) AC Power Cord Length: 6 ft. (18 AWG) Specifications: Charger Input - Voltage: 120v Charger Output - Amps: 800mA Charger Output Voltage: 12v Charging Banks: 1 Portable: Yes Box Dimensions: 4"H x 6"W x 9"L WT: 1.8 lbs UPC: 734357215014 Owner's Manual (pdf)

Read more less

Blue Smart IP65 Charger - 6V/12V - 1.1A - 120V - 1-15PThe Blue Smart IP65 Charger is the new professional battery charger with built-in Bluetooth. The Blue Smart IP65 Charger can be used on devices in the workshop and motor vehicles, such as (classic) cars; motorbikes; boats, and camper vans. The battery is charged, smartly... to the perfect conditionThe seven-step charging algorithm gets the best out of a battery. The charger gives the battery the power it needs, maintains its health, and ensures better performance... and longer life.Recovery of deeply-discharged 'dead' batteriesUnlike other brands, the Blue Smart IP65 Charger will attempt to recharge a deeply-discharged battery by force-feeding it with a low current. Regular charging will then be resumed as soon as sufficient voltage is across the battery terminals.Connect the battery with easeThe charger comes with both crocodile clips and M8 eyelets - making it easy to connect to the battery. If users wish, it can be left permanently connected.Check the status of your battery remotelyThe Blue Smart IP65 is equipped with built-in Bluetooth, so the status of the charger and the battery can be checked on a smartphone, tablet, or laptop. All settings of the charger can be configured with the VictronConnect app.Specifications: Input Voltage & Frequency Range: 100 - 250VAC | 45 - 65Hz  Efficiency: 82% Standby Power Consumption: <0,5 W  Minimum Battery Voltage: Starts charging from down to 0 V Charge voltage 'absorption': Normal: 7,2 V | 14,4 V / High: 7,35 V | 14,7 V / Li-ion: 7,1 V | 14,2 V Charge Voltage 'float': Normal: 6,9 V | 13,8 V / High: 6,9 V | 13,8 V / Li-ion: Disabled Charge Voltage 'storage': Normal: 6,6 V | 13,2 V / High: 6,6 V | 13,2 V / Li-ion: 6,75 V | 13,5 V Charge Current: 1.1 A  Low-Current Mode: 0,5A  Temperature Compensation (lead-acid batteries only): 8 mV/°C | 16 mV/°C  Power Supply Mode: Yes Back Current Drain: 0,1 Ah/month (140uA)  Protection: Reverse polarity, Output short circuit, Over-temperature Operating Temp. Range: -30 to +50°C (full rated output up to 30°C) Humidity (non-condensing): Max 95% Charge Algorithm: 7-stage adaptive Bluetooth: 4dBm, 2402–2480 MHz Enclosure Specifications: Battery-Connection: Black and red cable of 1,5 meter 230V AC connection: 1.5m cable with CEE 7/16 or AS/NZS 3112 plug Protection Category: IP65 (splash and dust proof) Weight: 0,4 kg Dimensions: 38 x 64 x 153 mm Standards: Safety: EN 60335-1, EN 60335-2-29 Emission; EN 55014-1, EN 61000-6-3, EN 61000-3-2 Immunity: EN 55014-2, EN 61000-6-1, EN 61000-6-2, EN 61000-3-3 Please contact your dealer for any returns, repairs or support issues related to this product. Quick Guide (pdf)Owner's Manual (pdf)Brochure (pdf)

Read more less

BlueSolar MPPT Charge Controller - 75V - 15AMPFeatures: Ultra-fast Maximum Power Point Tracking (MPPT) Especially in case of a clouded sky, when light intensity is changing continuously, an ultra-fast MPPT controller will improve energy harvest by up to 30% compared to PWM charge controllers and by up to 10% compared to slower MPPT controllers.  Load output Over-discharge of the battery can be prevented by connecting all loads to the load output. The load output will disconnect the load when the battery has been discharged to a pre-set voltage. Alternatively, an intelligent battery management algorithm can be chosen: see Battery Life. The load output is short circuit proof. Some loads (especially inverters) can best be connected directly to the battery, and the inverter remote control connected to the load output. A special interface cable may be needed, please see the manual.  Battery Life: intelligent battery management When a solar charge controller is not able to recharge the battery to its full capacity within one day, the result is often that the battery will continually be cycled between a ‘partially charged’ state and the ‘end of discharge’ state. This mode of operation (no regular full recharge) will destroy a lead-acid battery within weeks or months. The Battery Life algorithm will monitor the state of charge of the battery and, if needed, day by day slightly increase the load disconnect level (i.e. disconnect the load earlier) until the harvested solar energy is sufficient to recharge the battery to nearly the full 100%. From that point onwards the load disconnect level will be modulated so that a nearly 100% recharge is achieved about once every week.  Programmable battery charge algorithm See the software section on our website for details  Day/night timing and light dimming option See the software section on our website for details  Programming, real-time data and history display options - Color Control GX or other GX devices: see the Venus documents on our website. - A smartphone or other Bluetooth-enabled device: VE.Direct Bluetooth Smart dongle needed Warranty InfoWARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.Please contact your dealer for any returns, repairs or support issues related to this product. Specifications: Charger Input - Voltage: 18-75v Charger Output - Amps: 15a Charger Output Voltage: 12v/24v Charging Banks: 1 Portable: No Box Dimensions: 2"H x 6"W x 6"L WT: 1.3 lbs UPC: 8719076025320 Quick Guide (pdf)Brochure (pdf)

Read more less

MagCode Power Clip for Blue Smart IP65 Charger - 12V - 15 Amp Max (Requires Power Port)MagCode Power Clip is a connection cable for the Victon's Blue Smart IP65 Chargers.Features: 12V 15 amp max *Requires Victon’s MagCode Power PortPlease contact your dealer for any returns, repairs or support issues related to this product. Quick Guide (pdf)

Read more less

Battery Temperature Sensor (BTS) for Freedom 458 SeriesThe Battery Temperature Sensor (BTS) is a replacement BTS designed for the Freedom 458 inverter/charger series. The sensor has a 15 foot cable attached and it mounts on a terminal post of a battery in a bank or on the side of a battery. It measures the temperate, which automatically adjusts voltage to help ensure full battery charge depending on the ambient temperature of your battery installation. Features: Gives charger proper temperature compensated charging 15 ft (4.6 m) communications cable Compatible Devices:Freedom 458 SeriesWARNING: This product can expose you to chemicals including Diisononyl Phthalate (DINP) which is known to the State of California to cause cancer, and Di-isodecyl Phthalate (DIDP) which is known to the State of California to cause reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

BlueSolar MPPT Charge Controller - 75V - 10AMPFeatures: Ultra-fast Maximum Power Point Tracking (MPPT) Especially in case of a clouded sky, when light intensity is changing continuously, an ultra-fast MPPT controller will improve energy harvest by up to 30% compared to PWM charge controllers and by up to 10% compared to slower MPPT controllers.  Load output Over-discharge of the battery can be prevented by connecting all loads to the load output. The load output will disconnect the load when the battery has been discharged to a pre-set voltage. Alternatively, an intelligent battery management algorithm can be chosen: see Battery Life. The load output is short circuit proof. Some loads (especially inverters) can best be connected directly to the battery, and the inverter remote control connected to the load output. A special interface cable may be needed, please see the manual.  Battery Life: intelligent battery management When a solar charge controller is not able to recharge the battery to its full capacity within one day, the result is often that the battery will continually be cycled between a ‘partially charged’ state and the ‘end of discharge’ state. This mode of operation (no regular full recharge) will destroy a lead-acid battery within weeks or months. The Battery Life algorithm will monitor the state of charge of the battery and, if needed, day by day slightly increase the load disconnect level (i.e. disconnect the load earlier) until the harvested solar energy is sufficient to recharge the battery to nearly the full 100%. From that point onwards the load disconnect level will be modulated so that a nearly 100% recharge is achieved about once every week.  Programmable battery charge algorithm See the software section on our website for details  Day/night timing and light dimming option See the software section on our website for details  Programming, real-time data and history display options - Color Control GX or other GX devices: see the Venus documents on our website. - A smartphone or other Bluetooth-enabled device: VE.Direct Bluetooth Smart dongle needed Warranty InfoWARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.Please contact your dealer for any returns, repairs or support issues related to this product. Specifications: Charger Input - Voltage: 18-75v Charger Output - Amps: 10a Charger Output Voltage: 12v/24v Charging Banks: 1 Portable: No Box Dimensions: 2"H x 6"W x 7"L WT: 0.8 lbs UPC: 8719076025306 Quick Guide (pdf)Brochure (pdf)

Read more less

12V, 800mA Lead Acid/Lithium Selectable Battery ChargerThe Battery Tender® Junior 800 is the perfect versatile charger for lithium or lead-acid batteries in your motorcycle or other power sports vehicle. This 12V, 800mA charger can extend your battery’s lifetime and switch between charging AGM, lead-acid, GEL, flooded, and lithium (LifePO4) batteries. Compact and easy to use, this charger has a 12-foot output cord, fused alligator clips, and a ring terminal harness for hard-to-reach spaces. Unlike typical trickle chargers that can overcharge a battery and cause damage when connected for too long, our advanced charger and maintainer provide a full charge before switching to float mode to keep your battery at an optimal level.The Junior 800 selectable battery charger will keep your battery fully charged so it is ready to go when you are!Includes: 12V, 800mA selectable lead-acid/lithium (LifePO4) battery charger with LED status light to show battery status Fused ring terminal accessory cable for hard-to-reach batteries Fused alligator clip accessory cable for an alternate connection  5-year warranty and lifetime customer support Specifications: Output: 12V @ 800mA Compatibility: lithium (LifePO4), lead-acid, AGM, and gel batteries Dimensions: 4 x 2 x 1.37 inches, 1 lb (charger only) Reach: 12’ output cord and 18" alligator clip cable or 18" ring terminal cable Specifications: Charger Input - Voltage: 120v Charger Output - Amps: 800mA Charger Output Voltage: 12v Charging Banks: 1 Portable: Yes Box Dimensions: 4"H x 7"W x 9"L WT: 1.4 lbs UPC: 734357219906 Owner's Manual (pdf)

Read more less

Battery Temperature Sensor (BTS)Designed for use with TRUECharge2 battery chargers.The BTS mounts on a terminal post of a battery in a bank or on the side of a battery and measures its temperature. It sends precise information to the charger or charge controller, which automatically adjusts voltage to help ensure full battery charge depending on the ambient temperature of your battery installation.WARNING: This product can expose you to chemicals including Diisononyl Phthalate (DINP) which is known to the State of California to cause cancer, and Di-isodecyl Phthalate (DIDP) which is known to the State of California to cause reproductive harm. For more information go to P65Warnings.ca.gov. Quick Guide (pdf)

Read more less

VE. Direct Bluetooth Smart DongleUsing the VE.Direct to Bluetooth Smart dongle you can display your BMV or MPPT information on iOS and Android devices, using the VictronConnect app. View information wirelessly such as battery status and solar panel power, plus other useful data. The dongle is able to read data from all products with a VE.Direct port, such as the BMV-70x series battery monitors, Phoenix Inverters with VE.Direct port, MPPT Solar Charge Controllers.Warranty InfoWARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.Please contact your dealer for any returns, repairs or support issues related to this product. Quick Guide (pdf)Owner's Manual (pdf)

Read more less

MagCode Power Port for Blue Smart IP65 Charger - 12V - 15 Amp Max (Requires Power Clip)MagCode Power Port is a magnetic connector for Victon's Blue Smart IP65 Chargers.Specifications: Volt: 12V Max Amp: 15 *Requires Victon’s MagCode Power ClipPlease contact your dealer for any returns, repairs or support issues related to this product. Quick Guide (pdf)

Read more less

Battery Maintenance ChargerFully-automatic on-board charger provides a 1.5 Amp maintenance charge. Designed to maintain 12V batteries. Water resistant with safety features like short circuit connection and reverse polarity protection. LED status indicators 1.5 amp 12V 1 bank operation WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Charger Output Voltage: 12v AFD: No Charging Banks: 1 Lockable: No Portable: Yes Charger Input - Voltage: 120v Box Dimensions: 5"H x 5"W x 9"L WT: 1.7 lbs UPC: 022697119001

Read more less

ProSport 1.5A Multi-Use Maintainer - 120V - 1-BankProSport 1.5 Amp fully automatic maintainer is an innovative multi-use charger designed for maximum utility. Concealed mounting holes allow the ProSport 1.5 to be installed on-board or to be used as a portable, with rear die cut foam resting pad. Ring terminal and DC clamp quick connect cable assemblies included. Our marine grade design is weatherproof, water resistant to IP 65 and can be used in all fresh and salt water outdoor and indoor applications as needed. Designed to keep 12V batteries fully charged during short or long term storage periods, ProSport's Energy Saver mode will monitor and auto maintain a battery when needed to maintain a full state of charge. ProSport 1.5 significantly reduces AC Power consumption, lowers operating costs and maximizes reserve power performance.Features: Fully automatic energy saving design Multi-use design, easily configures for on-board or portable use Concealed mounting holes & die cut foam resting pad for portable use Expanded LED display for Power, Charging and Auto Maintain status Maintain 12V lead acid (sealed & vented) batteries up to 150A hours Quick connect DC clamp & ring terminal cable assemblies Weatherproof and water resistant to IP65 Built-in safety with reverse polarity, short circuit, temperature and ignition protection Pre-wired for easy installation 3 year warranty Meets UL 1236 and CSA Standards, cETLus WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Charging Banks: 1 Charger Output Voltage: 12v Charger Output - Amps: 1.5a Continuous Amperage: 1.5a Charger Input - Voltage: 120v Portable: Yes Box Dimensions: 4"H x 8"W x 9"L WT: 3.6 lbs UPC: 031669440012

Read more less

1.5A Maintainer ChargerMaintains charge on your battery.Features: 120V AC input, 1.5 Amp, 12V DC output Can be used as a portable maintainer or mounted Maintenance mode starts charging the battery when it falls below 12.8V Short circuit, reverse polarity and temperature protected Includes quick disconnect ring terminals and clamps cETLus certified to cUL1236, CEC WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Charger Input - Voltage: 120v Portable: No Charging Banks: 1 Charger Output - Amps: 1.5a Charger Output Voltage: 12v Box Dimensions: 4"H x 8"W x 9"L WT: 3.4 lbs UPC: 046904903962 Owner's Manual (pdf)

Read more less

Battery Indicator Eyelet M8 (30A ATO Fuse)The Battery Indicator Eyelet M8 is an accessory for the Blue Smart IP65 Chargers.Please contact your dealer for any returns, repairs or support issues related to this product. Quick Guide (pdf)

Read more less

Battery Temperature Sensor (BTS) f/Freedom SW SeriesThe Battery Temperature Sensor (BTS) mounts on a terminal post of a battery in a bank or on the side of a battery and measures its temperature. It sends precise information to the charger or charge controller, which automatically adjusts voltage to help ensure full battery charge depending on the ambient temperature of your battery installation. Features: Gives charger proper temperature compensated charging 25 ft. (7.6m) communications cable Compatible Devices:Freedom SW 2000, 3000, 2000 24V, 3000 24VWARNING: This product can expose you to chemicals including Diisononyl Phthalate (DINP) which is known to the State of California to cause cancer, and Di-isodecyl Phthalate (DIDP) which is known to the State of California to cause reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less